Related
ROM name: Lolli-P920
Version Android: 5.0.1 Lollipop
CM version: 12
Hello everyone and sorry for my poor English. I just wanted to inform you of all the features that will have this new rom:
-new Lancher Lollipop
-Android 5.0.1 installed (unofficial)
-new keyboard
-new status bar
-new applications (music, gallery, camera, etc ...)
-Improved wifi, internet browsing, resolution camera, video, streaming video
-Resolution images improved to 100%
-speed system improved by 15%
-Improved sleep mode
-best battery life
-Wireless boosted by 10%
-Improved scan wifi
-new home screen lollipop
- and much more...
------PLEASE READ ALL!!!------
as already I mentioned in my previous post this ROM will install Android 5.0.1 lollipop on our phone. The ROM based on Android 4.1.2 system, in fact, are the main features of andorid 4.1.2, but in practice, and a kind of amalgamation of andorid jelly beans and lollipop.
one of the first features found when you go to turn on the phone and the Manu phone unlock style andorid jelly beans but for practicality and speed are those of Android lollipop. another thing you notice, and the reaction of the system when you go to open an application. then there are other things that make this a unique ROM, that is all based on CyanogenMod 10 and 12 and of course a version modified by me personally and by other developers (Zeta99 and Unity Team).
Now I show you a list of all the new features:
-speed battery charge increased by 30%, comparable "almost" to that of the Samsung Galaxy S6;
-Stability system increased by 10%;
-the improvement of the streaming video and the reaction of the system;
-possibility to increase the RAM phone attraverso swaps that do not create any problems or crash the system;
-possibility to download almost all apps except those that are officially Android lollipop;
-new app including Xposed modules that enhance both the graphics and the phone is its performance;
-all phone app have been partially modified to make it so it is not wasted too much RAM or battery;
-autonomy battery stable (however advise you not straining too much, otherwise it leads to serious problems for both the battery and the phone is);
-and many other new features ...
BUT I'M SORRY tell you, but I HAD PROMISED THAT THE 3D IN A POST PAST ARE NOT ABLE TO PUT IT, WHY PHONE FIRST IS ABLE TO Protect it BUT THEN AFTER A FEW SECONDS WENT IN CRASH AND THEN I WAS FORCED TO REMOVE it, but never say never, in fact it may be that in a future update of the phone to be able to insert, without creating crash the phone. However, I can announce that soon will come two new updates:
-one that will bring Android 5.0.2, with some improvements and fixes minor bugs;
-one that will bring Android 6.0 Marshmallow, with major changes to most of the system is perhaps our dear beloved 3D!!!
the installation file weighs about 450 mb so I recommend you also leave free 1 GB to make room also backup and emergency system otherwise do my (recommended version 4.2.2 pacman).
But now I'll explain how to install the ROM on your LG-P920:
-for the first thing we connect our phone via USB cable to our PC;
-So We copy the RAR ROM Lolli 5.0.1.rar files in the main memory of the phone where we have the backup folder clockworkmod (if there is you then do this: press the power button + volume button upwards , the phone will reboot into recovery mode and you have a couple of options available to us we need backup and restore, let's go on with the volume keys and confirming with the power button, and go to select up and he will make us a backup version and all files, settings, etc ... we have in the phone, you now have the backup folder). "To download clockworkmod clockworkmod.apk write on the internet and download the apk file on your phone."
-after clockworkmod downloaded on our phone we turn off our phone is press the power button + volume button upwards, the phone will reboot into recovery mode and you have a couple of options, we need to us "wipe cache partition "and" wipe data / factory reset ".
-Let's go first to wipe cache partition and run it and after aniamo to wipe data / factory reset and run it.
-Now go to "backup and restore" with the volume keys and confirming with the power button, and then select Restore and select ROM Lolli 5.0.1.rar
- After confirming with the power button the phone will install the package there, waiting lob install the package and now we will have our phone with Android 5.0.1 (unofficial) installed
CAUTION:
1. do not install the "gapps.rar" files because the applications we need are already in the system rar files.
2. Before installing the system, make a backup "total!" our current system (pictures, music, contacts, messages, etc ..) and save it on your computer.
3. in addition to the system that you want to download mettetene also one of "emergency", because if the current gaming system that you downloaded does not work, bring in recovery mode system and install the emergency system and then install the backup you made before .
4. for every problem in the messages ask and I'll try to make a general answer to the problem you have.
5. do not totally rely on the system (for everyday use) because there are still some problems that I will solve in the future with new versions that come out.
6. the phone is responsive to commands you give it to avoid thermal warming much will always recommend every6. the phone is responsive to commands you give it to avoid thermal warming much will always recommend every time you use an app to close it when you do not need or use CLEANMASTER or other application to clean the remaining ram.
7. Enjoy your phone updated
download and ROM image can be found under the next message
| | | |
| | | |
| | | |
\/ \/
Download ROM (MediaFire): http://www.mediafire.com/download/c63tffjv76szryy/ROM+Lolli+5.0.1+(unofficial).zip
The website where to find the images of the ROM: http://azzurro2013.jimdo.com/tecnologia/smartphone/area-download-1/
Thanks to all for the support that we are giving you and goodbye to David G., Zeta99 and UnityTeam
Thread exists for this here:
http://forum.xda-developers.com/android/general/rom-rom-lolli-p920-t3225330
Please don't create duplicate threads.
Thread closed.
Thread exists for this here:
http://forum.xda-developers.com/android/general/rom-rom-lolli-p920-t3225330
Please don't create duplicate threads.
Thread closed.
my phone is NXT-L29C636, i debranded it and was running fine on AL10B386.
then i went into twrp to flash a china rom (kangvip b577), then phone cannot up, but still can boot into TWRP
then i use TWRP to install back AL10B386, then phone no longer boot properly, always stuck at booting.
then i did too many things to rescue it, i think i probably screwed up.
list of things i did
# fastboot flash recovery twrp, but it cannot boot into twrp anymore, i tried multiple twrp images all not working
# dload all sorts of rom i can get, all failed at 7% (stating software install failed)
# extract img from update.app, use fastboot to flash them, i tried many rom version, all not working.
now i can only go into fastboot, dload
what else i can try?
How to install NXT-L29C636B521 (Official) Beta Firmware. (Guide with download links)
hotomaya said:
my phone is NXT-L29C636, i debranded it and was running fine on AL10B386.
then i went into twrp to flash a china rom (kangvip b577), then phone cannot up, but still can boot into TWRP
then i use TWRP to install back AL10B386, then phone no longer boot properly, always stuck at booting.
then i did too many things to rescue it, i think i probably screwed up.
list of things i did
# fastboot flash recovery twrp, but it cannot boot into twrp anymore, i tried multiple twrp images all not working
# dload all sorts of rom i can get, all failed at 7% (stating software install failed)
# extract img from update.app, use fastboot to flash them, i tried many rom version, all not working.
now i can only go into fastboot, dload
what else i can try?
Click to expand...
Click to collapse
How to install NXT-L29C636B521 (Official) Beta Firmware. (Guide with download links)
NXT- L29C636B521
Changelog
Huawei designed EMUI 5.0 based on the newly released Android 7.0. The brand new EMUI 5.0 is inspired by the pure blues and whites of the Aegean Sea. The interface is simple and smart, and EMUI 5.0 comes with enhanced, powerful performance that allows mobile phones to operate more smoothly
Recommendations
• A cleaner, more interactive interface A brand new UI and effects inspired by the blues and whites of the Aegean Sea. Simplified gestures, with most operations completed in 3 steps. EMUI 5.0 is more customizable, offering an optional Android App Drawer layout to users.
• Enhanced features System operations are more fluid, allowing you to view a massive amount of images, browse websites, and perform searches faster.
Find out more
• Notifications An optimized design combines shortcuts with notifications to reduce the complexity of user actions. Touch and hold notifications to quickly block messages and notifications. Reminder cards are stacked to save space.
• Three dimensional task management Tasks are stacked three dimensionally on the UI. Smooth gestures allow users to scroll through tasks by sliding up and down or dismiss tasks by swiping left or right. • Camera Camera now supports plug-in management. Infrequently used modes, like document readjustment, are presented as plug-ins to save internal memory on your phone.
• Contacts Customization and sharing features added to name cards. The sharing feature allows quick sharing of contacts through Bluetooth, Facebook, and other methods. Added a scanner to the search box and lock screen, making it easier to add new contacts.
• Email Improved how unread emails are tagged in the inbox. Users can now quickly delete, star, and mark emails as read or unread from the left sliding menu.
• Settings Created a new suggested settings feature that recommends key settings based on the device's current status. Now, your phone is more capable of adjusting to your habits. Added a newly designed drawer feature. When this feature is enabled, it hides non-system preset apps in a drawer on the home screen, presenting you with a simple and tidy layout. Added a new drawer feature for settings. For settings that take two or more steps to set up, the user can now jump directly back to the main settings page with one gesture. Emergency information added. Users can add their names, blood type, and other information, so emergency services personnel can view this information from the lock screen. Added App twin, a feature that allows users to log in to two different accounts for third-party apps such as WhatsApp and Facebook.
Update notes
1. EMUI 5.0 includes substantial changes to functionality, which may impact your usage habits. For more details, go to HiCare and check out our user guide.
2. We recommend that you back up any important data before updating.
3. The system will restart after the update. This will take about 10 minutes. Following the update, your home screen will automatically display the EMUI 5.0 theme.
4. If you encounter any issues while using EMUI 5.0, please document the issue and call our official helpline. Visit Huawei's consumer website for hotline information.
Step by Step Guide
1.
Download these 3 files (update.zip, update_data_full_hw_spcseas.zip, supersu_v2.79_sr2.zip)
1.1- http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1255/g104/v70880/f1/full/update.zip
1.2- http://update.hicloud.com:8180/TDS/...ll/hw/spcseas/update_data_full_hw_spcseas.zip
1.3- http://www.sillanwali.com/downloads/supersu_v2.79_sr2.zip
2-
Copy these 3 files (update.zip, update_data_full_hw_spcseas.zip, supersu_v2.79_sr2.zip) into SD Card
3-
Download TWRP Recovery 3.0.3
http://sillanwali.com/downloads/twrp-3.0.3.img
4-
adb devices
adb reboot bootloader
fastboot oem device-info
fastboot oem unlock ****************
To obtain bootloader unlock code, go to https://emui.huawei.com/en/plugin/unlock/index
Huawei ID is the account you use to access all Huawei services.
Log in to your Huawei ID. Phone/Email. Password ********
fastboot flash recovery (PATH-TO)\twrp-3.0.3.img
5-
5.1- Reboot your phone to TWRP then choose Wipe > format > type Yes
5.2- Back again, then wipe (data, dalvik, cache, system)
5.3- Don't reboot
6-
Install
6.1- supersu_v2.79_sr2.zip (Don't reboot after install)
6.2- update_data_full_hw_spcseas.zip (Don't reboot after install)
ignore unmounting \ cust, system, userdata error
6.3- update.zip (Reboot when success)
7-
7.1- Factory Reset after success 100%. After that you will get NXT- L29C636B521 (Official) Beta Firmware.
7.2- Run bootloader
7.2- fastboot oem relock ****************
7.3- Factory Reset
8-
Install HiSuite
1.1- Download HiSuite (http://consumer.huawei.com/minisite/HiSuite_en/index.html)
1.2- Install HiSuite on your Computer
9-
Connect your phone to HiSuite
10-
Download Gboard apk & Install App using HiSuite
10.1- Download apk Gboard - the Google Keyboard
http://www.sillanwali.com/downloads/Google Gboard 6.0.69.142176780.apk
10.2- Install Gboard - the Google Keyboard App using HiSuite
10.3- Go to Settings>Advance settings>Language & input>Virtual keyboard and enable Gboard
10.4- Go to Settings>Advance settings>Language & input>Default keyboard and select Gboard
11-
Did I help you? A ''thanks :good:'' would be highly appreciated
I just got the same prob.
always "Software install failed" at 7% like you
and I have done the same thing as you do, No It's not working
please help us
Huawei P9 Custom Rom - for EVA-L09 - EVA-L19 - EVA-L29
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
*MagicRainbow*
Version 4
as usual in two Editions:
Magisk Edition and SuperSU Edition
German Thread: https://www.android-hilfe.de/forum/root-custom-roms-modding-fuer-huawei-p9.2808/huawei-p9-rom-android-7-0-emui-5-0-1-magicrainbow-v4-by-tecalote.859343.html
I'm happy to present you my fourth version of MagicRainbow ROM for P9-EVA
Requirements:
P9 EVA-L09 - EVA-L19 - EVA-L29 - without mobile provider branding (like Vodafone)
unlocked Bootloader
minimum official Huawei background firmware b394
TWRP 3.1.1-1 by oldDroid - extended Version: https://www.androidfilehost.com/?fid=673791459329067086
Note: In Settings of TWRP on the last Tab disable "keep vendor mounted" but enable "Exclude OEM-Path from data wipe"
Phone must be encrypted because this ROM is based on EMUI (TWRP has encryption support) - if your data partition is decrypted, ROM cannot be installed properly because the script mount your data as encrypted. If you come from EMUI based ROM or official Firmware data is encrypted by default
Developer Options enabled, in these settings enabled OEM-Unlock and: A) ADB Debugging in charging mode - B) USB Debugging (in this order, or it will not stay enabled)
Changelog:
European Firmware b398 based for EVA-L09 - with patch.zips for L19-c432 – L19-c185 – L19-c636 – L29-c636 – L09-c636 – L09-c185 Note: EVA-L09 need no patch, but the other models/cust need this patch immediately after flashing the Rom without Reboot to system - but with reboot of TWRP (for fixing the mountpoints after ROM installing)
Magisk-Edition: Magisk v16 - preinstalled modules (required):SELinux Permissive-Script 1.2 - Busybox 1.28.1 by osmOsis - Huawei Property Fix 1.3 - KernelAudiutorReborn allows to emulate init.d
Safetynet-Workaround look in the description for Magisk
SuperSU-Edition: SuperSU 2.82 SR5 - init.d Support - modified launch_daemonsu.sh for SELinux Permissive - BusyBox 1.28.1 by osmOsis
"Advanced Settings" - made personally by KangV well known as "K-Settings" - ported in MRv4 from chinese Firmware b399 - optional flashable zip separate for SuperSU-Editon and for Magisk-Edition - please support this project in credits section. These settings allow you the maximum of customization. In SuperSU-Edition you can enable in Advanced-Settings /more settings/Xposed Framework last v89 by rovo89 (and of course, a lot of more...)
Note: If you enable Xposed Framework - after reboot (which takes bit longer than usual) you must reboot your phone once again (only one times) and Xposed will be and stay enabled (you can disable Xposed with same settings)
In Magisk-Edition this setting is not active (cause it breaks safetynet)
To disable chinese letters after flashing this mod in statusbar - open Advanced Settings /Notification settings and disable "Show statusbar Lunar"
Known BUG: Dont use "Hide navigation bar" - it works only on chinese Brands.
In Europe you should not use: "Disable Google Services"
Note: Do not change DPI in developer options (this can brick your device) if you use KangV Settings - change DPI only with KangV Advanced Settings!
Note: Do not flash KangV-Settings before first reboot to System. You can do it after first setup, but dont change the EMUI Launcher to alternative Launcher (example: Nova Launcher) before you have flashed KangV-Settings (if you decide to use KangV Mod)
With KangV Advanced Settings PMPlusApp will be installed (this App dont work on Stock Roms) With PMPlus you can enable in Phonemanager (on second page) the feature: Auto-Launch It is a powerful Autostart-Manager (which can help you also to save battery) that gives you full auto launch control over all Apps - but you must manually allow them to start automatically or not, on boot or in the background.
Note: If you enable this mod - you must enable important Apps into auto launch, example: Magisk Manager /SuperSU must be enabled in "Auto Launch" - and additional in Secondary launch management!, if not you cannot manage Root-Requests! WhatsApp, Viber, Telegram - all these apps you must enable in "Auto Launch" or they do not work properly. Some Apps like Amazon needs also an extra setting in "Auto Launch, called "App secondary launch" (this will only be displayed if you use apps that need it)
To enable this mod open PMPlus, use install button, soon it is succesful installed - close PMPlus and uninstall this App. After open Phone Manager and on second page you will find "Auto Launch"
Note: This mod is not uninstall able, once enabled!
Both Edition of MRv4-ROM have modified services.jar - the maximum of acces to external SD is enabled (TitaniumBackup dont neeed "DocumentProvider" but can use Filesystem storage - Ext. SD Card)
App-Twin: more apps than usual are enabled for cloning (WhatsApp, Telegram, Skype and a lot of more...)
Only the main Google (Core) Apps are installed in system, all others are installed so that they can be uninstalled via Settings /Apps. Same with added Apps - all of them uninstall able via Settings /Apps. If you need more Google Apps you can install them with Playstore (dont flash any GApps)
Added: Facebook Lite and Skype Lite (both can work in 2G/3G and 4G and saves a lot of battery
VIPER4AndroidFX and Dolby/Atmos with preinstalled Driver
Some beautiful Designs included: IOS11 - Sky Blue - Galaxya - XDA Exklusive - AegeanSea - Blue Pixel - Mate 10 (Mountains)
Security-Patch-Level: 01.02.2018
Installation-Guide:
1) Your official Huawei Background-Firmware must be updated to minimal b394 (which is available for all models/cust) - for updating use please my Post from MRv3 #3: https://forum.xda-developers.com/showpost.php?p=74913874&postcount=3
Note: Your Fingerprint HWEVA/xxx/xxx:user/release-keys (which you can see with apps like "My Device") on MagicRainbow v3 will show you ...b394 - but that does not mean your background official Firmware is b394 ! You see this information, because MagicRainbow v3 is based on b394 same as MagicRainbow v4 is based on b398.
But important is - which build was your last official Firmware. For example: If you had flashed MRv3 over MRv2 (which was based on b386) your background Firmware is b386 ! And this Firmware is too old and cannot be compatible with the Custom ROM MagicRainbow v4 which is based on b398. Custom ROM and Background Firmware should be similar the same build. Personally, I always update first to the last available firmware for my device before flashing my own Custom Rom
But if you have updated your Firmware to b394 - before you have installed MagicRainbow v3 - or if you come right now from Stock Firmware b394, b395, b397... then there is no need to update the firmware now and you can flash the MagicRainbow v4 directly - but with Unroot (if your Phone is rooted) AND with the neccesary wipes!
2) Before update your Firmware (or for clean flash) you must backup your apps and data (you can use Huawei Backup and/or TitaniumBackup - in every case make backup only from user-apps and not from system apps/components)
Backup also the important folders from your internal storage (WhatsApp folder, DCIM and so on...) - and copy them back to internal storage after updating the Firmware...
For Chat/Net-Call Apps like Viber, WhatsApp use inside Chat-Backup on GoogleDrive. If you reinstall these apps and registrate them new with your phone number, backup will be found automatically and you are able to restore chat-history.
3) For the next steps I now assume that your firmware is up to date Download now all Files you need - ROM.zip - patch.zip (if you need it for different cust/model than EVA-L09c432) - KangV-Settings.zip and copy it to your external SD.
4) Delete on your Phone your Fingerprint(s) and PIN(s)
5) If your device has Root - flash Unroot with TWRP - for Magisk: http://tiny.cc/latestuninstaller - for SuperSU flash UPDATE-unSU-signed.zip from this site: https://forum.xda-developers.com/showpost.php?p=63615067
6) Go back to main menu in TWRP and use WIPE /Advanced Wipe - for clean flash wipe: Dalvik/ART-Cache, Cache, data, system, vendor - for dirty flash exclude: data from wipe
7) Flash ROM - next step (8) is only important if you have another model/cust than EVA-L09c432
8) If you have another (like L19c432, L29c636.....) - you must REBOOT TWRP now (TWRP /Reboot /RECOVERY) - dont reboot to system! After TWRP is rebooted, go to install and flash the RIGHT patch.zip which match your model/cust. (EVA-L09c432 dont need this step.) In every case: no need to wipe Dalvik/Cache after the flashings
9) Reboot phone (first start needs about 10 minutes) - dont flash KangV Settings before first Reboot to system
10) Setup your Phone - disable "send systemdata to Google" (save battery)
11) Disable “automatic system updates” in developer options (save battery)
Safetynet-Workaround in Magisk-Edition:
1) If you made clean flash - during first setup at the point you enable your Google Account - disable "sending system-data"
2) After first setup safetynet check with Magisk Manager will show you - ctsProfile and basicIntegrity=false - so dont check now :laugh:
3) Enable Developer Options and in these settings enable A) ADB Debugging in charging mode - B) USB Debugging (in this order, or it will not stay enabled)
4) Reboot your Phone - after reboot, cts-profile and basicIntegrity=true
- Now we go to make Playstore certified:
5) Open Playstore and disable Play Protect
6) SET YOUR PHONE INTO FLIGHT-MODE!
7) Open native settings /apps and (right down) more: Show system processes - click on every following app and delete in storage-section: cache and data (some of them show you: manage space - in this case use "Delete all data"):
Google App
Google Play services for Instant Apps
Google Playstore
Google Play-Services
Google Services Framework
Huawei ID or Huawei Mobile Services (which is the same)
8) Reboot your Phone
9) If you get a message after Restart "Your backup-account is not set yet" - DONT enable it now!
10) DISABLE FLIGHT-MODE NOW - and wait until you have full network-access (open Browser for testing)
11) Now you can enable your backup-account (message is shown in statusbar)
12) Open Playstore - If you are facing a problem when you open Playstore (showing just a blank site) - open Settings /Apps /Playstore /storage - but this time wipe only Cache inside, after Reboot your Phone. Soon P9 is restartet, Playstore should work proberly and it should be certified
13) If you are using Apps (like banking apps and so on) which requires safetynet - enable them in Magisk Hide - BEFORE you start these apps first time - after reboot phone and then you can start these apps first time.
Note: If you did all these steps and ctsProfile /or basicIntegrity is false (red) - one User of this Rom (L19c432) found a trick which solved his issue: https://forum.xda-developers.com/showpost.php?p=75796309&postcount=595
14) If you use in Phonemanager "Auto-Lauch" (enabled with PMPlus - see description KangV Advanced settings) - you must enable Magisk-Manager in Auto-Launch and in Secondary launch management!
15) You can update to newest Magisk 16.1 using following method: https://forum.xda-developers.com/showpost.php?p=75845280&postcount=87
Download ROM:
ROM - MagicRainbow-4_magisk.zip: https://www.androidfilehost.com/?fid=746010030569959046
MD5: c0856ddabf79312376ec5f90e52087ab
KangV-Settings_magisk.zip: https://www.androidfilehost.com/?fid=746010030569959103
MD5: 47ec7117a403af004e43c42cecde2b36
ROM - MagicRainbow-4_supersu.zip: https://www.androidfilehost.com/?fid=746010030569959091
MD5: 0ba05c096f4caa09afbe373d2986801d
KangV-Settings_supersu.zip: https://www.androidfilehost.com/?fid=673956719939824958
MD5: 4e197148bd00f4bb14ae7253d3f00a91
Download Patches (EVA-L09c432 dont need this!)
MD5-checksum is also shown on Android Filehost during download, please check your downloaded files if they match with this checksum.
Note: A very required point is - If you have another model/cust than EVA-L09-C432 and you must flash Patch.zip do it with following steps:
1) After flashing Rom - go back to main menu of TWRP, go to Restart /but NOT system - Restart RECOVERY
2) Then flash patch.zip and after reboot Phone first time. If you don't restart Recovery between, patch will not installed properly and some apps may not work then.
Information: I have decided to make new patch.zips because there are problems with safetynet (in the Magisk Edition). Once these are done, I will post the new links here.
L19-c432-patch.zip: https://www.androidfilehost.com/?fid=890129502657588204
L19-c185-patch.zip: https://www.androidfilehost.com/?fid=746010030569959118
L19-c636-patch.zip: https://www.androidfilehost.com/?fid=890129502657588206
L29-c636-patch.zip: https://www.androidfilehost.com/?fid=673956719939824987
L09-c636-patch.zip: https://www.androidfilehost.com/?fid=890129502657588201
L09-c185-patch.zip: https://www.androidfilehost.com/?fid=818070582850497993
HAVE MUCH FUN WITH THIS ROM
Many thanks to KangV for Advanced-Settings
If you like Advanced Settings made by KangV - you can support him: https://www.paypal.me/KangVIP
If you like *Magic-Rainbow* ROM and want to support the project, feel free to donate https://www.paypal.me/Tecalote
Many thanks and credits:
@OldDroid - TWRP with DECRYPTION SUPPORT for P9
@guitardedhero(Viper/Atmos)
@HootanParsa (MiXplorer)
@Chainfire - SuperSU
@topjohnwu (systemless Xposed Framework and Magisk)
@dkionline - Custom Roms for P9
@Blackball - Custom Roms for P8 - P9 - P 10 - P10Plus - Mate 9
@osm0sis – BusyBox for Android NDK
@ SuperR. – Best Kitchen I have ever seen
XDA:DevDB Information
MagicRainbow, ROM for the Huawei P9
Contributors
Tecalote
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 4.x
ROM Firmware Required: official Firmware b394 up to b398
Based On: EMUI (encrypted)
Version Information
Status: Stable
Current Stable Version: MagicRainbow v4.0
Stable Release Date: 2018-03-05
Created 2018-03-06
Last Updated 2018-03-14
Pictures and additions - tomorrow
Credits:
All Credits go to @Atarii for his special EMUI-Recovery for P9 EVA (L09 / L19 /L29). Users had reported, it is working also on P9+ VIE (L09 / L29) - but it will not work on other devices. Following method is based on this modified EMUI-Recovery.
Thanks to @zgfg He inspired me to do this post.
This Guide show you how to go back from Custom ROM to original Huawei EMUI Firmware. You can use this method also for updating/downgrade your Firmware - but only on Android 7. Also users of Lineage OS or RROS can use this method to return to Stock Firmware.
It can not be used for downgrade to Android 6 /or upgrade to Android 7 (this can brick your device) and it will not debrand your device!
Requirements: Unlocked Bootloader, installed TWRP, inserted SD Card (ExFat filesystem format recommended) -
Enable Developer Options and inside enable first ADB Debugging in charging mode and then USB Debugging - OEM Unlock must also be enabled!
Do a backup as usual if you change your system to another (Backup your Apps /data and also data from internal storage!)
Follow the steps on the instructions!
Not required: Root
Required: I would recommend to UNROOT your device before flashing the Firmware-Update and you should delete your Fingerprint /PIN /Password
How it works:
1) First you need one of those zip files (depended to your device):
Download HWOTA.zip for P9 and P9+ EVA/VIE-L09: [url]https://www.androidfilehost.com/?fid=962187416754474573[/URL]
md5: 98e141ca6d6ccc262d22288490a5eeea
Download HWOTA.zip for P9 EVA-L19: [url]https://www.androidfilehost.com/?fid=962187416754474574[/URL]
md5: e90b5b4d14d9808bb0626dbd77bb452f
Download HWOTA.zip for P9 and P9+ EVA/VIE-L29: [url]https://www.androidfilehost.com/?fid=673956719939834215[/URL]
md5: 5fad3c1971c45ad7b9a72ab2e8cc9404
2) Unzipp the HWOTA.zip on your PC - HWOTA folder contains 2 Files:
L(xx)_Recovery.img
(dependend to your device for example: L09_Recovery.img)
HWOTAUpdateSCRIPT.zip
3) Do not use internal Storage of your Phone! Create a folder in the main directory of your EXTERNAL SD with the name: HWOTA
4) Copy L(xx)_Recovery.img and HWOTAUpdateSCRIPT.zip into the HWOTA folder on your external SD.
5) Search for the correct FullOTA-MF Firmware for your Device /Cust and download the 3 firmware zip files. See Guide below...
6) Copy the 3 Firmware zip files into the HWOTA folder on your external SD:
update.zip
update_data_full_public.zip(The third zip file has different names dependend to your device: update_full_EVA-L09_hw_eu.zip / update_full_EVA-L19_hw_eu.zip / update_full_EVA-L19_hw_meafnaf.zip / update_full_EVA-L29_hw_spcseas.zip...) - Rename only this third zip file to the general name:
update_full_hw.zip
6) Your HWOTA folder on the external SD is now prepared!
7) Disconnect USB cable from your P9
8) Boot to TWRP and from HWOTA folder flash only: HWOTAUpdateSCRIPT.zip
9) The phone reboots to EMUI recovery and automatically installs the firmware. After 57% it takes a while, do not worry. As soon as the update has been performed 100%, the system will be restarted
10) Open settings /advanced settings/ Backup and restore and do a data Factoryreset with wipe of internal Storage
11) Once the factory reset is 100% in EMUI recovery, the phone restarts. At this moment, press the VOL + key until the EMUI Recovery boots again
12) Do Wipe Cache Partition and Reboot to System
13) Look into settings /about phone and enjoy - and if you want to stay on original firmware, now everything is done.
14) On some Firmwares the Bootloader will get closed - in case you want to open Bootloader again, enable Developer options and open them. First enable "Allow ADB Debugging in charge only mode" and then "USB Debugging" (in this order USB Debugging stays enabled) and very important: Enable "OEM Unlock". Enter your Unlock Code with ADB in Fastboot Mode. Let the phone doing the low-lewel-wipe and do not disconnect the Phone from USB, the wipe should be done with 100% (important)- if not: open settings /Advanced settings /Backup & reset /Factory data reset with enabled "erase internal storage"
15) To flash TWRP, enable Developer Options again / OEM Unlock is enabled (but greyed out) /enable ADB Debugging and USB Debugging and then flash TWRP in Fastboot Mode.
16) Enjoy
How to find the Firmware:
A) You can not use FullOTA-MF-PV or OTA-MF - you can use only FullOTA-MF firmware for this method.
The firmware for your device consists only of three zip files. But the differnt possibilities for downloading the firmware can show you four / sometimes five zip files if the Build is made for two or three models. For example for L09 /L19 and L29 or for L09 and L19.
You need in every case update.zip and update_data_full_public.zip and third zip must match your device - and you have to rename it:
Examples:
If you own L09-c432 you choose update_full_EVA-L09_hw_eu.zip - and rename this update_full_hw.zip
If you own L19-c432 you choose update_full_EVA-L19_hw_eu.zip - and rename this: update_full_hw.zip
If you own L19-c185 you choose update_full_EVA-L19_hw_meafnaf.zip - and rename this: update_full_hw.zip
If you own L19-c636 you choose update_full_EVA-L29_hw_spcseas.zip- and rename this: update_full_hw.zip
B) For searching your firmware you enter always model name and cust version from your device - for example:
EVA-L09C432 or EVA-L19C432 or EVA-L19C185 or EVA-L29C636 ....
Note: You can not install L19c636 Firmware if you own a L09c432 device ....
C) Which Firmware should I use?
For the users of MagicRainbow v4 I recommend to use the firmware that was installed before MRv4. Same for the users of MagicRainbow v3.
From there you can update if necessary.
Note: There can not be any impossible "version jumps". For example, it is not possible to update from b386 directly to b398. Firmwares depend on prerequisite versions. For example with EVA-L09c432 you can switch from b386 to b394 and then: b397 -> b398 -> b399. It is recommended to use approved versions, otherwise Playstore is not certified. For example, EVA-L09c432 currently has the rollout b399 - that means, the firmware is approved.
If you do not succeed in updating with this method, then you have done something wrong, or the download of the zip files is buggy, or the version did not fit. Nothing bad can happen if an update fails, but TWRP must be reinstalled. Then you can try it with a different version that fits your firmware. But you can not use firmware that does not match your model /cust - this can brick your device!
D) There are three ways to download the firmware and it is up to you, which you use of it
1. Firmware Finder - Android App on Playstore:[url]https://play.google.com/store/apps/details?id=com.teammt.gmanrainy.huaweifirmwarefinder&hl=us[/URL]
2. Direct Link: [url]http://pro-teammt.ru/firmware-database/?firmware_model=EVA-L09C432&firmware_page=0[/URL]
3. Firmware Finder for PC: [url]https://forum.xda-developers.com/tools/general/huawei-firmware-finder-team-mt-t3469146[/URL]
Instructions for v4 have that new section Playstore Certified but Magisk Hide section (from v3 Instructions) are omitted - Magisk Hide is no more needed?
Maybe you can also copy/paste the Statusbar Lunar note for K-Settings (if Chinese letters still persist).
In case of installing from L09 c432 b394 -> MR v3, upon going back to stock b394 (by HWOTA), is it necessary to update in two steps b397 -> b398 or it can be flashed only one HWOTA for L09 c432 b398.
zgfg said:
Instructions for v4 have that new section Playstore Certified but Magisk Hide section (from v3 Instructions) are omitted - Magisk Hide is no more needed?
Maybe you can also copy/paste the Statusbar Lunar note for K-Settings (if Chinese letters still persist).
In case of installing from L09 c432 b394 -> MR v3, upon going back to stock b394 (by HWOTA), is it necessary to update in two steps b397 -> b398 or it can be flashed only one HWOTA for L09 c432 b398.
Click to expand...
Click to collapse
Magisk Hide for some required components is preset!
You just enable Apps which requires safetynet (Banking Apps and so on) in Magisk Hide and reboot phone before you start these Apps first time.
Direct update from b394 to b398 didn't work for me and I got problems to update after trying the short way.
L09 c432 b394 -> MR v3 - going back to stock b394 (by HWOTA), then b397 then -> b398!
Statusbar Lunar note for K-Settings is included in description of KangV Settings
Hi,
What is difference between v3 and v4?
mnv12345 said:
Hi,
What is difference between v3 and v4?
Click to expand...
Click to collapse
I didn't install yet but you can check post #1 ChangeLog.
E.g. based on b398 (for c432) with Feb Sec patch, latest Magisk components and so
zgfg said:
I didn't install yet but you can check post #1 ChangeLog.
E.g. based on b394 (for c432) with Feb Sec patch, latest Magisk components and so
Click to expand...
Click to collapse
Where did you read based on b394? - I have written there and it is based in b398.
February Sec Patch is also written there..
Tecalote said:
Where did you read based on b394? - I have written there and it is based in b398.
February Sec Patch is also written there..
Click to expand...
Click to collapse
Of course b398, lapsus
mnv12345 said:
Hi,
What is difference between v3 and v4?
Click to expand...
Click to collapse
It contains the Features of b395 - 3D Camera Plugin
and newest Security Patch Level from b398 (February) - it has some optimations for Battery Life - Magisk Edition has newest Magisk v16 - SuperSU Edition has newest Xposed Framework (to enable from KangV Advanced Settings, sone more Apps added (but uninstall able from settings /apps)
Read Post #1 please
I'll hope you upload all files to change to v4.
My stock Rom is c185B387
Tecalote said:
Huawei P9 Custom RomSafetynet-Workaround in Magisk-Edition:
1) If you made clean flash - during first setup at the point you enable your Google Account - disable "sending system-data"
2) After first setup safetynet check with Magisk Manager will show you - ctsProfile and basicIntegrity=false - so dont check now :laugh:
3) Enable Developer Options and in these settings enable A) ADB Debugging in charging mode - B) USB Debugging (in this order, or it will not stay enabled)
4) Reboot your Phone - after reboot, cts-profile and basicIntegrity=true
- Now we go to make Playstore certified:
5) SET YOUR PHONE INTO FLIGHT-MODE!
6) Open native settings /apps and (right down) more: Show system processes - click on every following app and delete in storage-section: cache and data (some of them show you: manage space - in this case also DELETE ALL DATA):
Google App
Google Play services for Instant Apps
Google Playstore
Google Play-Services
Google Services Framework
Huawei ID or Huawei Mobile Services (which is the same)
7) Reboot your Phone
- if you get a message "Your backup-account is not set yet" - DONT enable it now!
8) DISABLE FLIGHT-MODE NOW - and wait until you have full network-access (open Browser for testing)
9) Now you can enable your backup-account (message is shown in statusbar)
10) Open Playstore - it is certified
11) If you are using Apps (like banking apps and so on) which requires safetynet - enable them in Magisk Hide - BEFORE you start these apps first time - after reboot phone and then you can start these apps first time.
Click to expand...
Click to collapse
I made it and Play Store stoped working. It searching updates for years and nothing else happen.
And second case. After clean flash via TWRP I lost TWRP and had to reflash it again. Is it normal?
hapnik said:
I made it and Play Store stoped working. It searching updates for years and nothing else happen.
And second case. After clean flash via TWRP I lost TWRP and had to reflash it again. Is it normal?
Click to expand...
Click to collapse
Playstore must just create new cache. Just open settings /apps and wipe in storage only cache at this point.
Reboot phone and it should work again.
Normally you loose not TWRP with clean flash. I never heard this.
But if you wipe internal storage included in the wipes you loose normally settings of TWRP.
That's why I do a wipe if internal storage with an extra step and reboot Recovery between the next wipes.
jonathanhenry81 said:
I'll hope you upload all files to change to v4.
My stock Rom is c185B387
Click to expand...
Click to collapse
I can upload HWOTA.zips for newest Firmware c185b387 tonight (but late)
Tecalote said:
I can upload HWOTA.zips for newest Firmware c185b387 tonight (but late)
Click to expand...
Click to collapse
Just take time you need
jonathanhenry81 said:
Just take time you need
Click to expand...
Click to collapse
I answered here: https://forum.xda-developers.com/showpost.php?p=75780638&postcount=557
You said your model is L19c185 and last official Firmware was b387.
In this case you must first update to b394 - after to b396 (you can't go directly to b396, it would fail)
The downloads and the Guide how to do you will find here:
https://forum.xda-developers.com/showpost.php?p=74913874&postcount=3
Be careful to download the right two zips.
I wish you success
Note: b396 is latest official Firmware for your device.
After it is installed (with factory reset and wipe of internal storage from settings) you can flash MRv4 (read Guide before)
Tecalote said:
I answered here: https://forum.xda-developers.com/showpost.php?p=75780638&postcount=557
You said your model is L19c185 and last official Firmware was b387.
In this case you must first update to b394 - after to b396 (you can't go directly to b396, it would fail)
The downloads and the Guide how to do you will find here:
https://forum.xda-developers.com/showpost.php?p=74913874&postcount=3
Be careful to download the right two zips.
I wish you success
Note: b396 is latest official Firmware for your device.
After it is installed (with factory reset and wipe of internal storage from settings) you can flash MRv4 (read Guide before)
Click to expand...
Click to collapse
I read the guide https://forum.xda-developers.com/showpost.php?p=74913874&postcount=3
and I'm not clear, I have MR V3 at this time. but before that update to stock B387 .. now to change MR v4 first I have to update and should I start with B387 or B394 ???
as the post says; first B387.
jonathanhenry81 said:
I read the guide https://forum.xda-developers.com/showpost.php?p=74913874&postcount=3
and I'm not clear, I have MR V3 at this time. but before that update to stock B387 .. now to change MR v4 first I have to update and should I start with B387 or B394 ???
as the post says; first B387.
Click to expand...
Click to collapse
I think b394 should be okay.
On L09 it is also working to update from b386 to b394
Hi a small question, once I have returned from MRv3 to stock. I am assuming that TWRP will need to be re-flashed! Is this correct?
DH
bubba_66 said:
Hi a small question, once I have returned from MRv3 to stock. I am assuming that TWRP will need to be re-flashed! Is this correct?
DH
Click to expand...
Click to collapse
Yes, that's correct - because the Update flash Stock Recovery (without no update possible)
After Update reflash of TWRP is necessary.
But sometimes Bootloader get closed and in this case unlock Bootloader is required..
[ROM][MidgarD V1.0] EMUI 5.1 Huawei Mate 10 Lite by Catuva21
ROM MORFUZ V 1.0 - EMUI 5.1. HUAWEI MATE 10 LITEKANGVIP RNE-B178-V2Aroma Installer
Code:
-
- I am not responsible for the damage of your cell phone if you do not correctly perform the steps
- loser warranty
- if you are not sure better not to touch and leave this page
Hello with all, recently I bought this terminal RNE-L23C605, and made roms for a huawei P9 Lite, now I will make some for this great cell phone, well let's start:
COMPATIBLE WITH
L23C605-L03C605
L21C432-L01C432
L21C900-L01C900
L02C636-L22C636
AL00C00
L21C10
L21C33
L21C185
L01C55
L21C738
L22C569
L22C635
L22C675
L03C178
L02C346
REQUIREMENTS:
- Activate the OEM unlocking, which is in adjustment / developer options and leave it so forever to avoid conflict.
- unlock the bootloader.
- install the recovery that I will leave, automated from windows
DETAILS OF THE ROM
- base kangvip-RNE-v178-v2
- You can modify the number of icons in the notification panel mode and the navigation bar.
- highly modifiable, do not modify screen resolutions
- is based on the last update of L21C435B135 (security patch April)
- installation mode aroma installer
- Kernel TeamPhenom 1.0
- eliminated the data space.
- Deodexed (improves optimization)
- Improvements in the quality of photos, video and sound.
- Optimization for performance games, and battery.
- It eliminated unnecessary google applications.
- Facial unlocking for other compilation that does not yet have it.
- Sound with Huawei Histen effect
- VOLTE activated
INSTALLED APPLICATIONS
- Full Call Recorder
- Youtube Mod (function in the background)
- Musica huawei Crack
HIDDEN FUNCTIONS ACTIVATED
- added more applications of social networks of Twin cloning
- Multi User X5
INSTALLATION MODE:
if it is the first time you install the recovery twrp follow these steps:
-guard the rom in an external memory.
- turn off the cell phone press the plus and power buttons until you have the TWRP window
- Press WIPE
- Press FORMAT DATA
- Write the word "yes" without quotes and accept, just do the work
- Press BACK to go back several times to the main window.
- Press reboot
- Press recovery
- Press Not Install or slide
- Automatically restart in recovery stock
- again see Pulsar WIPE
- Press ADVANCE WIPE
- Mark only DATA
- Press REPAIR OR CHANGE FILE SYSTEM
- As you will see in the upper part, this is in EXT4 or MNC format, which is not adequate and we must change.
- press CHAGE FILE SYSTEM
- Press F2FS and slide, then back to the window of the wipes.
- Now we will perform a system cleaning.
- mark: Dalvik, Cache, data, internal storage (optional), system, vendor, and product
- IMPORTANT !: do not mark "micro sdcard".
- once you have marked, slide the "swipe to wipe" arrow to clear it.
- go back to the main sale, press INSTALL
- press SELECT STORAGE
- Switch to Micro SDCard to find the rom.
- Search the rom select your taste in aroma installer.
- At the end of the installation press "wipe davilk-cache", wait for it to finish.
- then reboot system, it expects to take approximately 10min.
if you already installed a rom be stock or custom rom follow these steps:
- turn off the cell phone press the plus and power buttons until you have the TWRP window
- Press WIPE
- mark: Dalvik, Cache, data, internal storage (optional), system, vendor, and product
- IMPORTANT !: do not mark "micro sdcard".
- once you have marked, slide the "swipe to wipe" arrow to clear it.
- go back to the main sale, press INSTALL
- press SELECT STORAGE
- Switch to Micro SDCard to find the rom.
- Search the rom select your taste in aroma installer.
- At the end of the installation press "wipe davilk-cache", wait for it to finish.
- then reboot system, it expects to take approximately 10min.
AROMA INSTALLER
with aroma installer can selection
stock kernel or TeamPhenom
types of fonts
the root that you like or without root
You can also add
applications: like solid explorer, hbef, kernel auditor, quick reboot.
dolby atmos and viper.
NEXT WORK ROM MORFUZ BASED ON KANGVIP
Source Codes:
GPLv1: https://github.com/catuva21/kernelRNE-EMUI5.1
Contributors:
CATUVA21
KangV & Team HRT for KangVIP framework
Openkirin Recovery TWRP
ROM OS Version: RNE-L21C435B135 EMUI5.1
ROM Kernel: TeamPhenom
ROM Firmware Required: EMUI 5.1
Version Information:
Status: Stable
Created on: 2018-04-09
Last Updated on: 2018-04-09
Images
Download Links:
Morfuz 1.0
Recovery Twrp 3.1.1.0
my Blog link
Removed
if it is left without call and notification sounds, download, unzip and paste into the internal memory.
click link
give thanks and if you want to support the donations link is below
reservet2
Good rom @CATUVA21, but juste one question : is it normal not to have facial unlocking? I'm in l21c185
gmbengue said:
Good rom @CATUVA21, but juste one question : is it normal not to have facial unlocking? I'm in l21c185
Click to expand...
Click to collapse
I apologize that the previous rom did not respond, now observe and there was the added codes, use this file and paste in:
version/special cust/ RNE-L21/hw/meafnaf/prop/local.prop
use solid explorer and replace local.pro and restart the cell phone
CATUVA21 said:
I apologize that the previous rom did not respond, now observe and there was the added codes, use this file and paste in:
version/special cust/ RNE-L21/hw/meafnaf/prop/local.prop
use solid explorer and replace local.pro and restart the cell phone
Click to expand...
Click to collapse
Can't open system from solid explorer, and in twrp/file manager can't see version folder ! maybe something wrong with my installation. I do everything, one by one, like you say. but the rom is working.
Unable to instal magisk too
gmbengue said:
Can't open system from solid explorer, and in twrp/file manager can't see version folder ! maybe something wrong with my installation. I do everything, one by one, like you say. but the rom is working.
Unable to instal magisk too
Click to expand...
Click to collapse
Did u tried install Magisk Manager ?
TheSparta said:
Did u tried install Magisk Manager ?
Click to expand...
Click to collapse
Thanks Thesparta it's good
@CATUVA21 :good: Facial unlocking is here now and working well ! thanks for your job and the time you take for us !
just one thing (the last) when I plug earphone, the sound is low, even if I amplified it from viper4android. any idea?
gmbengue said:
Thanks Thesparta it's good
@CATUVA21 :good: Facial unlocking is here now and working well ! thanks for your job and the time you take for us !
just one thing (the last) when I plug earphone, the sound is low, even if I amplified it from viper4android. any idea?
Click to expand...
Click to collapse
I think that the local.prop solved my problem of sound, now it's good.
For the rom, some bugs : Emui Music is only in espagnol and chiness (I think), Mipop crash when longpress back key to kill app, and in motion control/pick up/wake up device can't be activated, doubletap2wake freeze the screen, you have to reboot
exept that, all is good. sorry for my bad english
Phone soft reboots when receiving a call.How can I fix it ?
my phone restart
my phone restart when receiving call
TheSparta said:
Phone soft reboots when receiving a call.How can I fix it ?
Click to expand...
Click to collapse
---------- Post added at 06:20 PM ---------- Previous post was at 06:10 PM ----------
dear bro @TheSparta followe this step
CATUVA21 said:
I apologize that the previous rom did not respond, now observe and there was the added codes, use this file and paste in:
version/special cust/ RNE-L21/hw/meafnaf/prop/local.prop
use solid explorer and replace local.pro and restart the cell phone
Click to expand...
Click to collapse
I'm using RNE-L22, I can't enter the K Advanced Setting, it just crash. Please help.
CATUVA21 said:
[ROM][MidgarD V1.0] EMUI 5.1 Huawei Mate 10 Lite by Catuva21
ROM MORFUZ V 1.0 - EMUI 5.1. HUAWEI MATE 10 LITEKANGVIP RNE-B178-V2Aroma Installer
Code:
-
- I am not responsible for the damage of your cell phone if you do not correctly perform the steps
- loser warranty
- if you are not sure better not to touch and leave this page
Hello with all, recently I bought this terminal RNE-L23C605, and made roms for a huawei P9 Lite, now I will make some for this great cell phone, well let's start:
COMPATIBLE WITH
L23C605-L03C605
L21C432-L01C432
L21C900-L01C900
L02C636-L22C636
AL00C00
L21C10
L21C33
L21C185
L01C55
L21C738
L22C569
L22C635
L22C675
L03C178
L02C346
REQUIREMENTS:
- Activate the OEM unlocking, which is in adjustment / developer options and leave it so forever to avoid conflict.
- unlock the bootloader.
- install the recovery that I will leave, automated from windows
DETAILS OF THE ROM
- base kangvip-RNE-v178-v2
- You can modify the number of icons in the notification panel mode and the navigation bar.
- highly modifiable, do not modify screen resolutions
- is based on the last update of L21C435B135 (security patch April)
- installation mode aroma installer
- Kernel TeamPhenom 1.0
- eliminated the data space.
- Deodexed (improves optimization)
- Improvements in the quality of photos, video and sound.
- Optimization for performance games, and battery.
- It eliminated unnecessary google applications.
- Facial unlocking for other compilation that does not yet have it.
- Sound with Huawei Histen effect
- VOLTE activated
INSTALLED APPLICATIONS
- Full Call Recorder
- Youtube Mod (function in the background)
- Musica huawei Crack
HIDDEN FUNCTIONS ACTIVATED
- added more applications of social networks of Twin cloning
- Multi User X5
INSTALLATION MODE:
if it is the first time you install the recovery twrp follow these steps:
-guard the rom in an external memory.
- turn off the cell phone press the plus and power buttons until you have the TWRP window
- Press WIPE
- Press FORMAT DATA
- Write the word "yes" without quotes and accept, just do the work
- Press BACK to go back several times to the main window.
- Press reboot
- Press recovery
- Press Not Install or slide
- Automatically restart in recovery stock
- again see Pulsar WIPE
- Press ADVANCE WIPE
- Mark only DATA
- Press REPAIR OR CHANGE FILE SYSTEM
- As you will see in the upper part, this is in EXT4 or MNC format, which is not adequate and we must change.
- press CHAGE FILE SYSTEM
- Press F2FS and slide, then back to the window of the wipes.
- Now we will perform a system cleaning.
- mark: Dalvik, Cache, data, internal storage (optional), system, vendor, and product
- IMPORTANT !: do not mark "micro sdcard".
- once you have marked, slide the "swipe to wipe" arrow to clear it.
- go back to the main sale, press INSTALL
- press SELECT STORAGE
- Switch to Micro SDCard to find the rom.
- Search the rom select your taste in aroma installer.
- At the end of the installation press "wipe davilk-cache", wait for it to finish.
- then reboot system, it expects to take approximately 10min.
if you already installed a rom be stock or custom rom follow these steps:
- turn off the cell phone press the plus and power buttons until you have the TWRP window
- Press WIPE
- mark: Dalvik, Cache, data, internal storage (optional), system, vendor, and product
- IMPORTANT !: do not mark "micro sdcard".
- once you have marked, slide the "swipe to wipe" arrow to clear it.
- go back to the main sale, press INSTALL
- press SELECT STORAGE
- Switch to Micro SDCard to find the rom.
- Search the rom select your taste in aroma installer.
- At the end of the installation press "wipe davilk-cache", wait for it to finish.
- then reboot system, it expects to take approximately 10min.
AROMA INSTALLER
with aroma installer can selection
stock kernel or TeamPhenom
types of fonts
the root that you like or without root
You can also add
applications: like solid explorer, hbef, kernel auditor, quick reboot.
dolby atmos and viper.
NEXT WORK ROM MORFUZ BASED ON KANGVIP
Source Codes:
GPLv1: https://github.com/catuva21/kernelRNE-EMUI5.1
Contributors:
CATUVA21
KangV & Team HRT for KangVIP framework
Openkirin Recovery TWRP
ROM OS Version: RNE-L21C435B135 EMUI5.1
ROM Kernel: TeamPhenom
ROM Firmware Required: EMUI 5.1
Version Information:
Status: Stable
Created on: 2018-04-09
Last Updated on: 2018-04-09
Images
Click to expand...
Click to collapse
4G not working on RNE-L22C636. How to fix ???
@catuVA2
Advanced settings do not work do you have an idea why it doesn't work ?
to L21C432
ok Advanced settings works with Magisk root
gmbengue said:
Thanks Thesparta it's good
@CATUVA21 :good: Facial unlocking is here now and working well ! thanks for your job and the time you take for us !
just one thing (the last) when I plug earphone, the sound is low, even if I amplified it from viper4android. any idea?
Click to expand...
Click to collapse
How did u manage to find facial unlock? I'm also on c185 and it seems like there's no such option
Edit:
After adding 'ro.config.face_recognition=true' to local.prop File in /system/emui/base/prop the option showed up in settings but i am unable to register my face, any idea?
smon3k said:
How did u manage to find facial unlock? I'm also on c185 and it seems like there's no such option
Edit:
After adding 'ro.config.face_recognition=true' to local.prop File in /system/emui/base/prop the option showed up in settings but i am unable to register my face, any idea?
Click to expand...
Click to collapse
CATUVA21 said:
I apologize that the previous rom did not respond, now observe and there was the added codes, use this file and paste in:
version/special cust/ RNE-L21/hw/meafnaf/prop/local.prop
use solid explorer and replace local.pro and restart the cell phone
Click to expand...
Click to collapse
use this method
Im not getting 4G signal. Im using rne-l22 how to fix?
4g on status bar not disappearing
Hi! Thanks for the great ROM.
4g symbol on status bar is not disappearing even when WiFi and mobile data are turned on.
How to fix this? Thanks
makelsevilla said:
Hi! Thanks for the great ROM.
4g symbol on status bar is not disappearing even when WiFi and mobile data are turned on.
How to fix this? Thanks
Click to expand...
Click to collapse
In the settings app, under mobile data there's that "More" button. In the menu that opens when you click that, open mobile network and then turn off "Mobile Data Always On" option. Do the same to the one in the developer options if that's also turned on. No need to turn off the second one if you didn't unlock developer options though.
[GUIDE/TUTORIAL/HOWTO] Samsung Galaxy S7 Edge Stock to Android 13
[GUIDE/TUTORIAL/HOWTO] Samsung Galaxy S7 Edge (hero2lte Exynos SOC) Stock to Android 13 / LineageOS 20
Supported models
International & Canada:
- SM-G935F
- SM-G935FD
- SM-G935X
- SM-G935W8
Korea:
- SM-G935S
- SM-G935K
- SM-G935L
This detailed step-by-step guide helps you transform your Samsung Galaxy S7 Edge hero2lte to a powerful one with Android 13.
Make sure your phone is hero2lte/Exynos SOC before going further: in Android, go to Settings > About phone > Check Model number is listed above.
If not, quit this tutorial.
### READ THOSE WARNING COMMENTS
CHANGELOG
v5. Back to TWRP 3.6 (3.7 oversize)
v4. Android 13, TWRP 3.7
v3. BitGApps v1, Magisk 25.2
v2. Update TWRP, add adb to change screen definition, update download link
v1. Initial release for Android 12
1) DOWNLOAD
- djibe Galaxy S7 hero2lte pack: https://bit.ly/djibe-galaxys7edge-pack
(contains Samsung tweaked Odin 3.13.1 + Samsung USB drivers + TWRP 3.6.2_9-0 official recovery + Magisk Root + adb.exe). Unzip files.
+ ROM Unofficial LineageOS 20: https://forum.xda-developers.com/t/...ofing-ota-updates-for-s7-edge-exynos.4484511/
Download latest build: https://ivanmeler.github.io/devices/hero2lte.html
+ BiTGApps Package ARM64 13: https://github.com/BiTGApps/BiTGApps-Release/releases
OR NikGApps T Basic: https://sourceforge.net/projects/nikgapps/files/Canary-Releases/NikGapps-T/
OR MindTheGApps 13 ARM64: http://downloads.codefi.re/jdcteam/javelinanddart/gapps
+ Charge phone to 100%
2) BACKUP DATA
Install Samsung USB drivers (you unzipped earlier).
Then plug phone to PC in File transfer mode.
Collect all .jpg or .mp4
Use Google built-in cloud to backup apps like SMS Backup & Restore to backup texts, contacts, etc.
Backup your WhatsApp messages in Google Drive.
Everything else: podcasts, Authenticators, TODOs etc...
Then copy the backup on your PC.
Make sure you have latest official updates for your phone:
Connect to Wifi and go to Settings > About device > Software update > Update now
### BACKUP NOW, you will lose everything.
3) FLASH TWRP 3.7 RECOVERY
Go to Settings > About phone> Software information.
Tap 7 times on Build number item to unlock Developer options.
Go to Settings > Developer options, switch OEM unlock ON and Confirm.
Shutdown phone.
Boot in Download Mode: hold Home + Power + Volume- until you see blue-green Warning screen and release buttons.
Confirm access to Download mode by pressing Volume+.
Phone now displays "Downloading..., Do not turn off target".
Connect phone in USB, wait for drivers installation.
Then launch Odin.exe (included in my archive) and wait for Odin indicator ID:COM to become blue.
In options: Verify re-partition and Auto Reboot are NOT ticked while F. Reset Time is ticked.
In AP > select twrp-3.6.2_9-0-hero2lte.img.tar
### Same recovery for Korean models (G930S/K/L variants)
### Warranty will be Void after next click ###
Click Start.
Wait until flash Success message appears.
Unplug phone.
Restart phone to recovery :
- hold Power + Home + Volume- until phone screen becomes black...
- and immediatly switch from Volume- to Volume+ (still holding Power + Home) and hold until Samsung's logo is displayed to land in TWRP recovery.
### If Android launches, hold 3 buttons until phone restarts and Samsung logo appears.
4) BACKUP IMEI PARTITION AND SYSTEM (Nandroid backup)
(Boot in Recovery Mode: Hold Home + Power + Volume+ until you see Samsung's logo then release and wait a few seconds for TWRP recovery to boot)
Recovery asks for Keep System Read Only ? > Swipe to Allow Modifications.
Go to Wipe > Format Data.
Type: yes and confirm with bottom right check icon.
Encryption is removed. You can now access partitions.
### If you miss this step you won't have access to any partition.
Back to home menu > Backup.
You can now select the partitions you want to save.
Select at least EFS partition to backup your IMEI. If a flash fails and partition is damaged you will still be able to restore this partition and use the phone.
If IMEI is lost during a flash, phone won't be able to reach cellphone networks.
I prefer to backup Boot, System, Baseband and EFS partitions. In case of problem, you will have your phone in its original state.
Swipe to Backup and wait during process.
Go to Home screen and continue with next chapter.
Save backup: still under TWRP recovery, connect phone to PC.
Go to Mount menu and check Data partition is checked and MTB button is on "Disable MTP" state.
From Windows explorer, access phones memory and copy-paste the TWRP folder (located in root folder, beside DCIM and Music folders) somewhere safe on your computer.
5) FORMAT PARTITIONS
### Make sure you copied TWRP backup from internal memory to somewhere safe.
Go to Wipe > Advanced wipe,
select Dalvik, Cache, System, Data, Internal Storage (if you really made a backup at step 2), then Swipe to Wipe.
Back to TWRP home screen, go to Reboot > Recovery and swipe to reboot.
On next launch, check the checkbox to remember choice and swipe to allow modifications.
6) FLASH ROM, (MAGISK ROOT) AND GAPPS
Back to TWRP main menu, go to Mount menu again to connect phone to PC again.
Connect phone to PC and use Windows explorer to copy files on phone's internal memory.
Copy TWRP folder from your phone to somewhere safe on PC.
This backup can restore your phone to its original Samsung state.
Copy files of ROM + BitGApps + Magisk on phone.
Go back to TWRP Home menu. Then tap on Install > choose lineage*.zip,
Optional for root: Add More zips > Magisk*.zip
then Swipe to confirm Flash.
Wait for operation to end.
Go to Reboot > Recovery and swipe to reboot.
After restart, go to Install, select bitgapps*.zip and swipe to flash.
Then tap Wipe cache/dalvik, swipe to confirm,
then Reboot System and on Install TWRP App? menu, tap on button Do Not Install
Wait for the phone to boot during 5 minutes.
7) ROOT ACCESS
Configure Android as you like.
Don't try to set fingerprints at first setup. It will crash.
No need for extra work to be root.
Magisk launches with Android.
Superuser permissions can be managed from Magisk Manager app.
8) TWEAKS
- Calibrate battery: https://www.ifixit.com/Wiki/Battery_Calibration
- Set dark Mode to improve battery by 30%
Settings > Display > Dark theme.
- For better battery, remove Always on display
Settings > Display > Lock screen > Ambient display
- Activate Developer options
Go to Settings > About.
At bottom, tap 7 times on Build number. You activated Developer options.
Go to Settings > System > Advanced > Developer options.
- Change screen definition for low GPU/CPU usage: from 1440x2560 to 1080x1920
You need developer options to enable USB debugging.
Open a terminal where adb.exe from my pack is located.
Plug phone and Authorize USB debugging.
Then type:
Code:
adb shell wm size 1080x1920 && adb shell wm density 400
// Defaults 1440x2560 and 504
- Screen sensitivity is too low ?
Try to recalibrate screen sensitivity with https://play.google.com/store/apps/details?id=touchcalibration.favoritappindia&hl=en&gl=US
Enjoy,
djibe
Thanks: @Ivan_Meler, LineageOS team, TWRP team, TopJohnWu
---------------------------------------
Coming from another ROM
- Backup
- Recovery: Wipe Cache, Dalvik cache, System and Format Data > yes
- Reboot recovery
- Flash rom
- Reboot recovery
- Flash BitGApps
Enjoy
Force Samsung Galaxy S7 restart
Hold Power + Volume down for 10-20 seconds
Thanks for the detailed instructions.
Please fix two minor typos: In the Odin instructions, the files should be hero2lte* not herolte*.
Re Magisk: 24.0, I suppose, should be used / upgraded to. (I've run into issues with 24.2 on another platform.)
steve8x8 said:
Thanks for the detailed instructions.
Please fix two minor typos: In the Odin instructions, the files should be hero2lte* not herolte*.
Re Magisk: 24.0, I suppose, should be used / upgraded to. (I've run into issues with 24.2 on another platform.)
Click to expand...
Click to collapse
Hi, you are correct and I'll fix glitch.
For Magisk, as you report bugs, I'll wait to move to 24.x. You can create an Issue here: https://github.com/topjohnwu/Magisk/issues
Thanks for sharing
I have a problemi instaled twrp format data and and instal rom after configuration rom when i rebooting to twrp data is encrypted. why ?
zulwik said:
I have a problemi instaled twrp format data and and instal rom after configuration rom when i rebooting to twrp data is encrypted. why ?
Click to expand...
Click to collapse
Hi, did you Format Data then Advanced Wipe > Format Cache, System ?
Then
Reboot to Recovery
Flash ROM
Reboot to recovery
Flash BitGapps
Reboot
I solved problem.
I installed older version TWRP with Odin and new version
hey @djibe89 & other XDA folks, thanks for these steps.
I have a SMG935W8 and currently borked on the BiTGApps step. All proceeded smoothly until there and now I'm seeing an error on TWRP and I'm not really sure how to resolve it.
It's complaining that the install config is not found and that it's an unsupported Android SDK version, which doesn't seem quite right.
Any tips would be highly appreciated
Judging from my deep dive, the current LineageOS 19.1 builds are SDK 32, and the BiTGapps builds only support up to 31... Definitely looking for tips, still.
Going to try this post's GApps
Hi, for now, stick to latest LOS 19 build: https://github.com/ivanmeler/ota_provider/releases/tag/herolte_lineage-19.0_1646935359, not 19.1
Or could you try NikGapps and tell us?
Thanks @djibe89 ! I went with NikGapps and that was a win.
It might be good to edit the top post to say 19.0 or have the NikGapps linked in it, for future readers.
Phone's working great. I appreciate it!
Bujiraso said:
Thanks @djibe89 ! I went with NikGapps and that was a win.
It might be good to edit the top post to say 19.0 or have the NikGapps linked in it, for future readers.
Phone's working great. I appreciate it!
Click to expand...
Click to collapse
Hi, I'll update it.
I hoped a newer BitGapps update would be released by now.
Enjoy, this phone is awesome
Hey again!
Been daily driving this for a bit and here's a laundry list of the issues I see, in no order at all.
I'm not sure if they're Lineage issues or artifacts of being an "unsupported" Lineage build.
1. The screen just stays on despite the power save settings (I've tried 15s, 30s, you name it) if I'm on the home screen. Trebuchet, is it?
It's like it has some keep alive function a la YouTube. It's not 100% but it seems far more than 50% of the time that I have to manually lock the device. Anyone know if I've just configured something wrong or if this is how the launcher is supposed to work?
2. Phone services will not stop demanding my location, no matter what I configure. It's every few minutes and it's creeping me out a ton. Why is it so nosey?
3. The call audio quality is still barely usable. While I *can* have intelligible business conversations when required, they suffer the quality noticeably and are terribly robotic and tinny. For personal calls, I tried to play it off once but immediately was laughed out of the call: they asked before even a "how are you" could pass if we could switch to VoIP since it was so comically bad. After some kind tips from Ivan I tried mucking with the mixer levels to no avail. They did seem a bit "low" compared to the 18.1/19.0 values, so I pumped them in a couple places (NB volume from 22 to 32, call default volume on 917 from 98 to 164 -- I have no clue what any of these mean). It might be louder now? It's not worth an A/B test to confirm what should be the expectation, but my point is that it didn't fix the robotic, tinny quality.
4. Banking app complains of the device being rooted, but it isn't. "Great." I hear the latest Zygisk might fix? I haven't tried yet.
Now, I'm still excited to be on 12L! I'm trying to buff my ability to dev on this ROM and fix up some of these issues, as I really don't think this phone needs to be replaced yet, but being stuck on stock Oreo isn't working either, so I say let's hack this thing till it's stable as stock!
Hi @Bujiraso , thanks for sharing.
Didn't use it on a daily basis
Have you tried another launcher ?
I think bank apps detect custom ROM, nothing can be done. Hope I'm wrong. Some genius of signature spoofing can pass this I believe. But I'm not.
djibe89 said:
- To tweak overclocking and more, use SmartPack-Kernel Manager
SmartPack-Kernel Manager - Apps on Google Play
The ultimate tool to manage your kernel
play.google.com
Enjoy,
djibe
Click to expand...
Click to collapse
We're sorry, the requested URL was not found on this server. New Link please.
SERGE4NT said:
We're sorry, the requested URL was not found on this server. New Link please.
Click to expand...
Click to collapse
Hi, you can try https://play.google.com/store/apps/details?id=com.performancetweaker.app or https://f-droid.org/repo/com.smartpack.kernelmanager_174.apk
hi, is it possible for the model number SM-G9350
Klein44 said:
hi, is it possible for the model number SM-G9350
Click to expand...
Click to collapse
Hi, sadly no.
9350 and 9300 have Snapdragon SOCs, not Exynos.
Only Android 8 ROMs: https://forum.xda-developers.com/f/samsung-galaxy-s7-edge-snapdragon-roms-kernels.5975/
Oh, ok. And is there any good custom rom for the SM-G9350 model?
Klein44 said:
Oh, ok. And is there any good custom rom for the SM-G9350 model?
Click to expand...
Click to collapse
Like you see here: https://forum.xda-developers.com/f/samsung-galaxy-s7-edge-snapdragon-roms-kernels.5975/
No.
This happens with Qualcomm proprietary SOCs