Database Info

[q] what am i on!!!????

i am so confused, i did the OTA UPDATE and retained root, flashed the new deodexed 2.3.6 rom.
verified that i am on the new 2.3.6
just for giggles i tried to install version 4 supercharged, and it worked! all seems to be working, except the volume control from the problems from the deodexed rom 2.3.6
however when i check to see what version i have, it says 2.3.5
55.11.16.mb865.ATT.en.us
i did a reboot, it it has retained 2.3.5.
so what am i running?
i wonder if i could flash the FXZ since the phone says that im on 2.3.5???

answered my own question.
i tried to flash back via rsd lite and it stopped at 6/20.
did vol up/down
NORM BOOT and im back to normal'
2.3.6
supercharged V4
phone reports 2.3.5
hmm

matt99017d said:
answered my own question.
i tried to flash back via rsd lite and it stopped at 6/20.
did vol up/down
NORM BOOT and im back to normal'
2.3.6
supercharged V4
phone reports 2.3.5
hmm
Click to expand...
Click to collapse
That's because the underlying scripts are from 2.3.6, but because you flashed sc v4 all of the apps under system/apps were replaced from 2.3.5 essentially you are running 2.3.5 but you phone thinks it's 2.3.6 and none of the patches and fixes that came with 2.3.6 work.

farshad525hou said:
That's because the underlying scripts are from 2.3.6, but because you flashed sc v4 all of the apps under system/apps were replaced from 2.3.5 essentially you are running 2.3.5 but you phone thinks it's 2.3.6 and none of the patches and fixes that came with 2.3.6 work.
Click to expand...
Click to collapse
k
i will flash back to 2.3.6 rom.
then all will be well?

matt99017d said:
k
i will flash back to 2.3.6 rom.
then all will be well?
Click to expand...
Click to collapse
Yup! If you flash 2.3.6 from bootstrap everything should return to normal.

farshad525hou said:
Yup! If you flash 2.3.6 from bootstrap everything should return to normal.
Click to expand...
Click to collapse
well kinda, i get a flash fail each time i start the phone.
i select normal boot, and i am back
gonna see if i can figure out the fxz file fixx and get back too 2.3.5

matt99017d said:
well kinda, i get a flash fail each time i start the phone.
i select normal boot, and i am back
gonna see if i can figure out the fxz file fixx and get back too 2.3.5
Click to expand...
Click to collapse
How did you flash it? If you are planning to flash it through RSD Lite you have to mod the xml's. If you have root you can just flash the Stock deodxed 2.3.5 that's posted on the dev section

farshad525hou said:
How did you flash it? If you are planning to flash it through RSD Lite you have to mod the xml's. If you have root you can just flash the Stock deodxed 2.3.5 that's posted on the dev section
Click to expand...
Click to collapse
i have to edit the xml

do YOU HAVE root?

matt99017d said:
i have to edit the xml
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1477929

farshad525hou said:
do YOU HAVE root?
Click to expand...
Click to collapse
yes is do still have root

matt99017d said:
yes is do still have root
Click to expand...
Click to collapse
Then you can just install bootstrap and flash this: http://depositfiles.com/files/wk7i3b1n1 (Credit: lfaber06)
And you will be back to 2.3.5.

cogeary said:
http://forum.xda-developers.com/showthread.php?t=1477929
Click to expand...
Click to collapse
thanks!
it got past #6 this time in rsd
how come it only goes to 18 and not 20?

I need help..

This is the first post I have a problem with my mobile motorola atrix 2
Battery OK
OK to program
Connect
Data Cable
Invalid CG (CG: webtop Invalid sp data
Invalid GG version (CG: webtop):
Invalid CG OTV (CG: The webtop
Help me

What are you trying to do? The more information about your issue, the more help we can provide...
Sent from my SAMSUNG-SGH-I747 using xda premium

Apex_Strider said:
What are you trying to do? The more information about your issue, the more help we can provide...
Sent from my SAMSUNG-SGH-I747 using xda premium
Click to expand...
Click to collapse
Format the device worked and became a Motorola logo seems to me for a second
Then back to list fastbot I think the problem in this
Invalid CG (CG:webtopInvalid sp data
Invalid GG version (CG: webtop):
Invalid CG OTV (CG: webtop

Okay Sparky, I'll ask again. What are trying to do, flash a rom, FXZ to stock, or what? And which firmware version do you have, were you running a custom rom before or just stock? You need to be addressed as descriptive as possible, telling us exactly what you are doing, what you have done, and any other info you think is relevant here...
Sent from my SAMSUNG-SGH-I747 using xda premium

My guess is that they need to read this post......
http://forum.xda-developers.com/showthread.php?t=1493386

Apex_Strider said:
Okay Sparky, I'll ask again. What are trying to do, flash a rom, FXZ to stock, or what? And which firmware version do you have, were you running a custom rom before or just stock? You need to be addressed as descriptive as possible, telling us exactly what you are doing, what you have done, and any other info you think is relevant here...
Sent from my SAMSUNG-SGH-I747 using xda premium
Click to expand...
Click to collapse
Formate
I want a program or a way to restore the system
I try to access the Recovery Do not open
2.3.6
.55.13.25.MB865.ATT.en.US

Thanks this is not the solution Is there a Software for re-initialize the entire>>

http://forum.xda-developers.com/showthread.php?t=1396650
Look for fxz in this thread. And make sure you patch it, if you are not in the US you will need to get your fxz from here:
http://sbf.droid-developers.org/edison/list.php
You will still need to patch it with files from the link at the top though.

jimbridgman said:
http://forum.xda-developers.com/showthread.php?t=1396650
Look for fxz in this thread. And make sure you patch it, if you are not in the US you will need to get your fxz from here:
http://sbf.droid-developers.org/edison/list.php
You will still need to patch it with files from the link at the top though.
Click to expand...
Click to collapse
Can you tell me what the meaning of
Invalid CG (CG:webtopInvalid sp data
Invalid GG version (CG: webtop):
Invalid CG OTV (CG: webtop

ALEXSANDER1 said:
Can you tell me what the meaning of
Invalid CG (CG:webtopInvalid sp data
Invalid GG version (CG: webtop):
Invalid CG OTV (CG: webtop
Click to expand...
Click to collapse
Yes, you have formatted these partitions, and so the signature check is failing.

Now there is no solution Can I retrieve the original Rom and work mobile
I can not access to the Recovery and not out of the list of AP Fastboot mode

ALEXSANDER1 said:
Now there is no solution Can I retrieve the original Rom and work mobile
I can not access to the Recovery and not out of the list of AP Fastboot mode
Click to expand...
Click to collapse
Are you saying you can't get into fastboot?
If not, then there is nothing you can do. There is not a way I know of to get fastboot back onto the phone.
What exactly did you do, to get yourself into this mess? That might help me think of a possible solution. Please be as specific as possible.

jimbridgman said:
Are you saying you can't get into fastboot?
If not, then there is nothing you can do. There is not a way I know of to get fastboot back onto the phone.
What exactly did you do, to get yourself into this mess? That might help me think of a possible solution. Please be as specific as possible.
Click to expand...
Click to collapse
Yes, you can get on the list AP Fastboot mode
Such on the screen
Battery OK
OK to program
Connect usb
Data Cable
Invalid CG (CG:webtopInvalid sp data
Invalid GG version (CG: webtop):
Invalid CG OTV (CG: webtop
How out of it

ALEXSANDER1 said:
Yes, you can get on the list AP Fastboot mode
Such on the screen
Battery OK
OK to program
Connect usb
Data Cable
Invalid CG (CG:webtopInvalid sp data
Invalid GG version (CG: webtop):
Invalid CG OTV (CG: webtop
How out of it
Click to expand...
Click to collapse
Good then you can restore your phone back to stock using the fxz. I linked to how to do that already. This will restore your phone back to 100% stock 2.3.5 and you will need to update back to 2.3.6. Did you ever install the ICS leaks? If you did you might have to use my script to restore instead. If not, then the links I gave you should work.

jimbridgman said:
Good then you can restore your phone back to stock using the fxz. I linked to how to do that already. This will restore your phone back to 100% stock 2.3.5 and you will need to update back to 2.3.6. Did you ever install the ICS leaks? If you did you might have to use my script to restore instead. If not, then the links I gave you should work.
Click to expand...
Click to collapse
What fxz.
Where and How to Get It
I did not use any leaks Ice cream

Are there any of grfs.img dos
What about what this work
Invalid CG (CG:webtopInvalid sp data

ALEXSANDER1 said:
What fxz.
Where and How to Get It
I did not use any leaks Ice cream
Click to expand...
Click to collapse
I gave you the links back on the fist page of this thread, in my first reply to you.

jimbridgman said:
I gave you the links back on the fist page of this thread, in my first reply to you.
Click to expand...
Click to collapse
I tried flashing rsd program, but fails at stage 7 is not complete to the last Each time

ALEXSANDER1 said:
I tried flashing rsd program, but fails at stage 7 is not complete to the last Each time
Click to expand...
Click to collapse
Did you patch the fxz, with the patch file(s)?

Who can address the problem of my mobile
I need your expertise

Help... it keeps rebooting

My phone was working with CM9 and I flashed it with stock Rom Gingerbread 2.3.6 JPKPH using Odin... I checked the PDA and PIT files and it showed (Passed). but it keeps rebooting...
I tried flashing it again without PIT but it is the same.. keeps rebooting...
I tried to make factory reset from Recovery but it says :
E formate_volume rfs format failed on /dev/block/stl10
Help please...

Arabi3d said:
My phone was working with CM9 and I flashed it with stock Rom Gingerbread 2.3.6 JPKPH using Odin... I checked the PDA and PIT files and it showed (Passed). but it keeps rebooting...
I tried flashing it again without PIT but it is the same.. keeps rebooting...
Help please...
Click to expand...
Click to collapse
refer to this thread http://forum.xda-developers.com/showthread.php?t=1894737 the first guide on how to upgrade to GB. Not saying ur in FROYO but it has the same step. Follow carefully

just did all steps in the guide with JPKPH not XXPQ... but still rebooting...

Arabi3d said:
just did all steps in the guide with JPKPH not XXPQ... but still rebooting...
Click to expand...
Click to collapse
Your phone has corrupted NAND memory probably.

chriz74 said:
Your phone has corrupted NAND memory probably.
Click to expand...
Click to collapse
How to fix it???
I flashed a MIUI and it worked perfectly... but when i enter Recovery mode and make mount and storage\ format dbdata it shows error...
also if i restore my stock rom JXKP3 or flash a new stock rom it keeps reboot again and the Factory Reset doesn't work....
please if anybody knows a solution please tell me...

Flash xxkpe then ddlf2
sent from Samsung galaxy S i9003 Remics JB v3

Send to the samsung service.. It's hardware problem..
Sent from my GT-I9003 using Tapatalk 2

Arabi3d said:
My phone was working with CM9 and I flashed it with stock Rom Gingerbread 2.3.6 JPKPH using Odin... I checked the PDA and PIT files and it showed (Passed). but it keeps rebooting...
I tried flashing it again without PIT but it is the same.. keeps rebooting...
I tried to make factory reset from Recovery but it says :
E formate_volume rfs format failed on /dev/block/stl10
Help please...
Click to expand...
Click to collapse
i assuming you have no hardware problem.
1. you have converted to EXT4, which when flashing CM9 or MIUI.
2. you flash back to stock firmware, which using RFS format.
3. you get bootlooping after you flash stock "1 package .tar file in PDA", which is very wrong. although odin show pass
you should do the below.
1. download a component type firmware, eg. XXKPE or XXKPQ, unzip than you have 3 or 4 .tar file
2. flash with odin for the .pit file first.
3. reboot download mode, than flash the firmware.
How to flash

chongns said:
i assuming you have no hardware problem.
1. you have converted to EXT4, which when flashing CM9 or MIUI.
2. you flash back to stock firmware, which using RFS format.
3. you get bootlooping after you flash stock "1 package .tar file in PDA", which is very wrong. although odin show pass
you should do the below.
1. download a component type firmware, eg. XXKPE or XXKPQ, unzip than you have 3 or 4 .tar file
2. flash with odin for the .pit file first.
3. reboot download mode, than flash the firmware.
How to flash
Click to expand...
Click to collapse
Thanks sooooooooo much... now it's resolved...
I did steps in this file:///C:/Users/Rasheed/Downloads/New%20folder/flashing-xxkpq-poseidon-writer.html
until the step 24.
now i have XXKPQ but with no Arabic language..
please how can I download Arabic language in XXKPQ???

Arabi3d said:
Thanks sooooooooo much... now it's resolved...
I did steps in this file:///C:/Users/Rasheed/Downloads/New%20folder/flashing-xxkpq-poseidon-writer.html
until the step 24.
now i have XXKPQ but with no Arabic language..
please how can I download Arabic language in XXKPQ???
Click to expand...
Click to collapse
this problem are not so technical. so i request you to search the forum.
hits. search for arabic patch.
Sent from my Galaxy Nexus using Tapatalk 2

[Q] Failed trying to downgrade from JB 4.1 Leak to ICS 4.0.4 Leak, Boot Failure

Hello, i recently purchased this ME865 and it's a very good phone.. I installed the 4.0.4 ICS Hong Kong from here:
http://forum.xda-developers.com/showthread.php?t=1934874
And everyting went alright, but then i wanted to test this new 4.1 Jelly Bean if it was better, so i installed and no problems.
I didn't like that version much, also the gps didn't worked, so as i read that everyone could downgrade it, i tried to install again with RSDLite the 4.0.4 i installed before.
So the install process finished and when it rebooted it gives me the following errors in Fastboot Mode:
Invalid CG OTV (CG: cdrom): Invalid SP Data
Invalid CG OTV (CG: system): Invalid SP Data
Invalid CG OTV (CG: webtop): Invalid SP Data
Invalid CG Version (CG: webtop)
Invalid CG OTV (CG: webtop)
What should i do now? The phone is connected to my PC and RSDLite detects the device, i don't want to do anything cause i am scared to f**k it up more.
Please help!

and etital
Okay, i've read a little and it seems i could try to flash again, so i gave a try, i installed 4.1 again and it seems it works again!
But how can i downgrade it to 4.0.4? I don't like this firmare too much

Agusfn said:
Okay, i've read a little and it seems i could try to flash again, so i gave a try, i installed 4.1 again and it seems it works again!
But how can i downgrade it to 4.0.4? I don't like this firmare too much
Click to expand...
Click to collapse
You SHOULD be OK to flash ICS via RSD lite. I am not sure about the error message it gave you before, but make extra sure that you have the right FXZ. If you do indeed have the right one, then try re-downloading the file to rule out the possibility if a bad/corrupted download.
Brought to you by time and relative dimensions in space.

Phone soft bricked Please help !!!

Okay so i rooted my Moto Atrix 2 yesterday to install custom ROMs. After rooting and installing Bootstrap when i tried to install the new ROM it said signature verification failed and now the phone loads in utility recovery and shows the same error.What should i do ? I need this phone back desperately as i don't have a spare phone as of now

saketbanka said:
Okay so i rooted my Moto Atrix 2 yesterday to install custom ROMs. After rooting and installing Bootstrap when i tried to install the new ROM it said signature verification failed and now the phone loads in utility recovery and shows the same error.What should i do ? I need this phone back desperately as i don't have a spare phone as of now
Click to expand...
Click to collapse
You should have used boot menu manager instead of bootstrap...OK now u can fxz back..YouTube link:- http://m.youtube.com/watch?v=StOLKEUN-lU

The stock rom files are saying not available.Is there any other link from where i can download ? I'm from India and I'm a noob so kindly guide me

saketbanka said:
The stock rom files are saying not available.Is there any other link from where i can download ? I'm from India and I'm a noob so kindly guide me
Click to expand...
Click to collapse
Use this link
or JB leak 3

sameerm02 said:
Use this link
or JB leak 3
Click to expand...
Click to collapse
Which one to download ? I'm from India, sorry for the senseless questions

saketbanka said:
Which one to download ? I'm from India, sorry for the senseless questions
Click to expand...
Click to collapse
http://web.archive.org/web/20130817...s.org/edison/6.7.2_EDEM-18-SEARET_cfc.xml.zip

saketbanka said:
Which one to download ? I'm from India, sorry for the senseless questions
Click to expand...
Click to collapse
JB leak 3 means jelly bean stock rom (works on Indian A2)
And about that list, these are ICS stock ROMs (I guess some are gb), use any Retail asia like 28-37 searet (actually I dont remember which exactly I used)
But my suggestion is to use that JB leak 3. (works great on my ph) (I am also from India )
You can install any stock rom (jb/ics) BMM works on both

Stops at second step
sameerm02 said:
Use this link
or JB leak 3
Click to expand...
Click to collapse
I tried flashing both the Jelly bean as well as the ICS firmware. It aborts in the second step. Kindly help asap. I tried flashing from utility recovery too and that shows signature verification failed

Stops at second step
I tried flashing both the Jelly bean as well as the ICS firmware. It aborts in the second step. Kindly help asap. I tried flashing from utility recovery too and that shows signature verification failed

saketbanka said:
I tried flashing both the Jelly bean as well as the ICS firmware. It aborts in the second step. Kindly help asap. I tried flashing from utility recovery too and that shows signature verification failed
Click to expand...
Click to collapse
Your phone needs to be in ap fastboot just to be clear to flash... an also have all the drivers installed properly and make sure rsd is up to date as well. Then its all a matter of doing research and finding a file that acctually works.
An make sure your flashing the file thats appropriate to the firmware you had on your phone before this happened. I hope this helps.
**Also you dont want to be flashing both gb/ics firmwares thats how you will brick your device.