Screen remains black after Moving phone from ear or even after disconnecting call - Optimus One, P500, V Q&A, Help & Troubleshooting

Hi everyone, I have a problem when in stock rom (v10g, v20g) everything is normal, but when I try to flash any rom cook (oxygen, gsnap, grt, gblur, miui...) which are the following problems occur :
1. Make a call using dialer or from contacts.
2. Move the phone to ear. The screen turns off
3. Move the phone away from ear, the sreen remains turned off.
4. Disconnect the call from the other phone, the screen remains turned off.
5. A missed call from any other phone turns it on again.
I've tried the flash kenel, check Always use proximity but still nothing changes .I hope someone can help me this problem.I thank you very much.
(Ps : Sorry if you read do not understand because my english is not good)

sagari1989 said:
Hi everyone, I have a problem when in stock rom (v10g, v20g) everything is normal, but when I try to flash any rom cook (oxygen, gsnap, grt, gblur, miui...) which are the following problems occur :
1. Make a call using dialer or from contacts.
2. Move the phone to ear. The screen turns off
3. Move the phone away from ear, the sreen remains turned off.
4. Disconnect the call from the other phone, the screen remains turned off.
5. A missed call from any other phone turns it on again.
I've tried the flash kenel, check Always use proximity but still nothing changes .I hope someone can help me this problem.I thank you very much.
(Ps : Sorry if you read do not understand because my english is not good)
Click to expand...
Click to collapse
flash v2.5.5-ta-vsyncOff-20120810-signed.zip from here

thatnextdoorboy said:
flash v2.5.5-ta-vsyncOff-20120810-signed.zip from here
Click to expand...
Click to collapse
I tried v2.5.5-ta-vsync-20120810-signed.zip
v2.5.5-ta-vsyncOff-20120810-signed.zip
v2.5.5_ics-ta-vsyncOff-20120810-signed.zip
but nothing change.
Anyway, thank you very much.
I am very sad for not being able to use cook rom. Every rom cook great but for me the error as above. Hope someone can fix fears.

hoangtu1905kute said:
I tried v2.5.5-ta-vsync-20120810-signed.zip
v2.5.5-ta-vsyncOff-20120810-signed.zip
v2.5.5_ics-ta-vsyncOff-20120810-signed.zip
but nothing change.
Anyway, thank you very much.
I am very sad for not being able to use cook rom. Every rom cook great but for me the error as above. Hope someone can fix fears.
Click to expand...
Click to collapse
i can just suggest though.... go back to stock and do hard reset... and then flash new baseband and after that flash any rom you like... try it out.. time consuming but well you have to try... ....

_viren_ said:
i can just suggest though.... go back to stock and do hard reset... and then flash new baseband and after that flash any rom you like... try it out.. time consuming but well you have to try... ....
Click to expand...
Click to collapse
Can you help me about clearly detailed step-by-step instructions. I thanks.
Hope everything will be

hoangtu1905kute said:
Can you help me about clearly detailed step-by-step instructions. I thanks.
Hope everything will be
Click to expand...
Click to collapse
1.use the forum search and download an old baseband u can also use kdz and download v10 kdz.... then install it... by this you will have the stock rom
2. again use search download a new baseband v20g or v20h or any but v20 and flash and make your baseband new
3. download any rom you like and flash it... and check if you have the same problem you had b4... long way but try.. :fingers-crossed:

_viren_ said:
1.use the forum search and download an old baseband u can also use kdz and download v10 kdz.... then install it... by this you will have the stock rom
2. again use search download a new baseband v20g or v20h or any but v20 and flash and make your baseband new
3. download any rom you like and flash it... and check if you have the same problem you had b4... long way but try.. :fingers-crossed:
Click to expand...
Click to collapse
1. Kdz v10g --> kdz v20h : Normal
2. Root : Unlockroot 2.4.1 --> Update SuperUser---> Dowload Rom Manager ---> Flash 5.0.2.7 : Normal
3. Reboot Recover : Wipe data + Wipe cache + Wipe davik + Wipe battery
4. Install zip sd card --> choose zip sd card --> Rom CM7 nightly 20120819
5. Reboot system now : Screen remains black after Moving phone from ear or even after disconnecting call
6. Reboot recover --> Flash kenel v2.5.5-ta-vsyncOff-20120810-signed.zip --> Reboot : but nothing change
7. Reboot recover : Replace #3 and #4 --> Rom Gsnap v1.5 Reboot : nothing change
8. Reboot recover : Replace #3 and #4 --> Rom Zapper Reboot : nothing change
----> Oxy ----> Kaiko : nothing change
9. Replace #1(kdz v20g) --> #2 --> #3 ---> #4 : nothing change
:crying::crying:
Can you help me ???? Everyone help me ???

Flash latest CM nightly.
Download
Do a clean flash.. wipe everything!!
If you still have this issue.. flash each and every kernel you find in this forum and observe if any kernel
rectifies your problem.
After flashing any kernel.. wipe cache and dalvik cache!!

Related

T959v reset problem

hi guys
My phone got a big problem : it reset automatically while I'm using.
I tried to flash stock and cook roms. But it's not better.
Can any body help me run away from this problem
Thanks
Model T599v.
We need more information please
What ROM are you using, how many ROM's have you flashed, etc.
you can see screenshots in ATTACH FILES
sorry because of my poor English
you can see screenshots in ATTACH FILES
I'd flashed stock 2.3.6 & 2.3.5 or sth. and some CM9 ROM's.
sorry because of my poor English
giang-rocker said:
you can see screenshots in ATTACH FILES
I'd flashed stock 2.3.6 & 2.3.5 or sth. and some CM9 ROM's.
sorry because of my poor English
Click to expand...
Click to collapse
You need to use a one click to go back to stock and then reflash the CM9 Rom. Seems you might have some old files in the system taking up precious space. Check out the link below to return to stock
http://forum.xda-developers.com/showthread.php?t=1822626
brandonc0526 said:
You need to use a one click to go back to stock and then reflash the CM9 Rom. Seems you might have some old files in the system taking up precious space. Check out the link below to return to stock
http://forum.xda-developers.com/showthread.php?t=1822626
Click to expand...
Click to collapse
thank bro.
but I do this many time. Go back stock then flash CM9
but the problem is not fixed
giang-rocker said:
hi guys
My phone got a big problem : it reset automatically while I'm using.
I tried to flash stock and cook roms. But it's not better.
Can any body help me run away from this problem
Thanks
Model T599v.
Click to expand...
Click to collapse
You mean it rebooted by itself?
giang-rocker said:
thank bro.
but I do this many time. Go back stock then flash CM9
but the problem is not fixed
Click to expand...
Click to collapse
Sounds like after you install cm9, wipe everything, and reinstall again.
Reboot to recovery
"Factory Reset/Wipe Data"
"Mounts & Storage" -> "Format /system"
Go back to the main menu
"Install zip from sdcard" -> select the cm9 zip file and install it.
Install the gapps for ics
Go back to the main menu
Reboot
After you install and login to google so you can get to the play store, install alogcat.
Please document which apps you install, or any settings you set.
If it happens again, and you can reproduce the problem, start alogcat before the problem happens and post the log to http://pastebin.com/ or http://pastie.org/ and put the link here.
Also tell us what applications you have installed and what settings you enabled/disabled.
The more details and information you give, the better we can help you.

Samsung Galaxy Note ROM XXDLL7 AntoniomistrettA NSS Abyss kernel

For fix fix EXYNOS BUG ​
1.Make a Backup
2.Full wipe
3.Download mode and through ODIN flash this firmware XX LL7 http://www.hotfile.com/dl/187400765/9fda7d4/N7100XXDLL7_N7100OXADLL4_XEF.zip
4. root chainfire http://download.chainfire.eu/264/CF-Root/CF-Auto-Root/CF-Auto-Root-t03g-gtn7100.zip
5.Now you have superuser, not CWM.
6. Trough ODIN flash CWM Chenglu https://hotfile.com/dl/176065007/332cffb/cwm6-recovery-n7100-121014.tar.html
7.flash this Rom or another or restore Backup!
8.Triangle Away if you want
AbyssN2 kernel 1.5.1 Final Stable Version
Deodex
Transparent weather widget and more, see screenshot!:laugh:​
]
Info and download:
http://www.nonsolosmartphone.it/post78496.html#p78496
It's compatible with Simplistic Framework V3.0.1 DLL4!
:laugh::silly:
DWNLDNG NOW
I'll try & test it 2NT
:good:You're welcome!:good:
Hello Antonio, thanks for your hard work and time, Ok I installed the official firmware DLL7 by odin to update the bootloader than rooted it installed recovery gave it a complete wipe (data factory reset, system wipe, cache and dalvik wipe), than installed your Rom, it boots up but message pops up as soon as phone starts "set up wizard has stopped working" and the phone restarts.....any help, thank you.
vtec303 said:
Hello Antonio, thanks for your hard work and time, Ok I installed the official firmware DLL7 by odin to update the bootloader than rooted it installed recovery gave it a complete wipe (data factory reset, system wipe, cache and dalvik wipe), than installed your Rom, it boots up but message pops up as soon as phone starts "set up wizard has stopped working" and the phone restarts.....any help, thank you.
Click to expand...
Click to collapse
+1
I have the same problem. I always do a full wipe.
vtec303 said:
Hello Antonio, thanks for your hard work and time, Ok I installed the official firmware DLL7 by odin to update the bootloader than rooted it installed recovery gave it a complete wipe (data factory reset, system wipe, cache and dalvik wipe), than installed your Rom, it boots up but message pops up as soon as phone starts "set up wizard has stopped working" and the phone restarts.....any help, thank you.
Click to expand...
Click to collapse
Mystenes said:
+1
I have the same problem. I always do a full wipe.
Click to expand...
Click to collapse
The full wipe, you have to do when flash the original firmware,for Exynos Bug Fix, then do the root and then my rom!:good:
ok thank you very much, I will give it a try, Regards.
Sent from my GT-N7100 using xda premium
Hello
I have the same problem
Thank u
The amazing rom
The amazing icons
Can you work Theme holds fingerprint includes the upper bar and screen Contact slash black or blue
Thanks again
Excuse use Google translation
majeeed said:
Thank u
The amazing rom
The amazing icons
Can you work Theme holds fingerprint includes the upper bar and screen Contact slash black or blue
Thanks again
Excuse use Google translation
Click to expand...
Click to collapse
No problem, but I love this theme!
araby said:
Hello
I have the same problem
Click to expand...
Click to collapse
Full wipe before flash original firmware, then no wipe for install this rom!:good:
hi there, regarding the abyss kernel, im using the default setting, but my phone seems like turning off automatically ( the led still flashing, only black screen) once every after full charge. I have to press the power button to turn it back on.
do you know what might be the problem ? or maybe the correct settings other than defaults? thanks. been reading the angelo thread in the nss forum but im still clueless , lol
antoniomistretta said:
I suggest to you, to have the new bootloader to flash via Odin the new official firmware, of course after making a backup!:
............................
............................
............................
..................
Click to expand...
Click to collapse
antoniomistretta said:
The full wipe, you have to do when flash the original firmware,for Exynos Bug Fix, then do the root and then my rom!
Click to expand...
Click to collapse
Thank you Antoniomistretta , my old friend , for your great wrk
I DO folow your instructions , and had a smooth instalation without any problems , so far
Keep the GOOD wrk
May GOD bless you
abumhmmd1 said:
Thank you Antoniomistretta , my old friend , for your great wrk
I DO folow your instructions , and had a smooth instalation without any problems , so far
Keep the GOOD wrk
May GOD bless you
Click to expand...
Click to collapse
Thank you, thank you, thank you!:laugh:
For fix fix EXYNOS BUG
1.Make a Backup
2.Full wipe
3.Download mode and through ODIN flash this firmware XX LL7 http://www.hotfile.com/dl/187400765/9fda7d4/N7100XXDLL7_N7100OXADLL4_XEF.zip
4. root chainfire http://download.chainfire.eu/264/CF-Root/CF-Auto-Root/CF-Auto-Root-t03g-gtn7100.zip
5.Now you have superuser, not CWM.
6. Trough ODIN flash CWM Chenglu https://hotfile.com/dl/176065007/332cffb/cwm6-recovery-n7100-121014.tar.html
7.flash this Rom or another or restore Backup!
8.Triangle Away if you want
shinchan162 said:
hi there, regarding the abyss kernel, im using the default setting, but my phone seems like turning off automatically ( the led still flashing, only black screen) once every after full charge. I have to press the power button to turn it back on.
do you know what might be the problem ? or maybe the correct settings other than defaults? thanks. been reading the angelo thread in the nss forum but im still clueless , lol
Click to expand...
Click to collapse
Strange. When you get it, but it should not, if you left everything default, hold for ten seconds, the power button.Or change kernel!
Yesterday:
Hi Antoniomistretta ,
...
I noticed that the battery life is better in this ROM
did you introduced some tweekes , or it is related to XXDLL7 firmware , or I'm just lost
abumhmmd1 said:
Hi Antoniomistretta ,
...
I noticed that the battery life is better in this ROM
did you introduced some tweekes , or it is related to XXDLL7 firmware , or I'm just lost
Click to expand...
Click to collapse
Same old tweaks, my friend. Firmwar is good, kernel is good!:good:
abumhmmd1 said:
Hi Antoniomistretta ,
...
I noticed that the battery life is better in this ROM
did you introduced some tweekes , or it is related to XXDLL7 firmware , or I'm just lost
Click to expand...
Click to collapse
antoniomistretta said:
Same old tweaks, my friend. Firmwar is good , kernel is good !:good:
Click to expand...
Click to collapse
OK
this means .. better battery in this ROM not related to the first one , neither the last one .
and you agree with me ... its related to XXDLL7 firmwar , and added .. the kernel
THANKs

Problem after installed the third party ROM(cannot use the mobilenetworkGSM, 2G,3G,4G

Dear all,
it is the first time for me to post something in this forum, I hope you guys forgive my poor english
Anyway, I was rooted and installed the other roms but I found that I cannot use the mobile network anymore (even I checked the APN)
I hope the experts in this forum can give me some ideas to fix this problem
thx very much
Hello,
Did you perform a full wipe (Data/cache/dalvic) before you flashed a custom rom? Which rom did you flash?
Head over to the recovery and wipe the above things I have mentioned and again flash the rom and then the gapps..
vin4yak said:
Hello,
Did you perform a full wipe (Data/cache/dalvic) before you flashed a custom rom? Which rom did you flash?
Head over to the recovery and wipe the above things I have mentioned and again flash the rom and then the gapps..
Click to expand...
Click to collapse
Thanks for your reply very much, I was flashed the rom GarTot-CARBON-KK4.4.2-0228-Nexus5 in my machine and I did triple wipes as well...
Btw, wt is the meaning of "gapps"?
JACKYCYK said:
Thanks for your reply very much, I was flashed the rom GarTot-CARBON-KK4.4.2-0228-Nexus5 in my machine and I did triple wipes as well...
Btw, wt is the meaning of "gapps"?
Click to expand...
Click to collapse
Could you please share the link of the rom? From where did you download it??
If you have performed wipes correctly and flashed the rom successfully, I don't see any reason for it not to access connection(2g,3g)... You're using the kernel which came with the rom, right?
Gapps means Google Apps... You need to flash it after the rom flash usually...
I'm having the same problem! I just flashed faux kernel with ParanoidAndroid and I can't get any data connection
Bump, any ideas?
quentin0 said:
I'm having the same problem! I just flashed faux kernel with ParanoidAndroid and I can't get any data connection
Click to expand...
Click to collapse
Verify your APNs are correct
Sent from my Nexus 5
Pirateghost said:
Verify your APNs are correct
Sent from my Nexus 5
Click to expand...
Click to collapse
I believe they are correct. I tried the APN settings which looked correct that were already there, and I even tried deleting out all the APNs and recreating T-mo LTE one that I use.
I tried reflashing back to stock and I still cannot connect.
I popped my SIM into my Nexus 4 and it works perfectly, but not when it's in my Nexus 5.
Well I figured out my issue, it's super embarrassing.
I had replaced my battery because it wasn't holding a charge well anymore. Apparently the antenna on the volume button side of the phone wasn't pushed down all the way (i think it got unhooked when prying open the cover).
The reason I thought it was software was because I flashed all this stuff right after I put the cover back on. Lesson learned: change one thing at a time, will make troubleshooting easier if things go south,
vin4yak said:
Could you please share the link of the rom? From where did you download it??
If you have performed wipes correctly and flashed the rom successfully, I don't see any reason for it not to access connection(2g,3g)... You're using the kernel which came with the rom, right?
Gapps means Google Apps... You need to flash it after the rom flash usually...
Click to expand...
Click to collapse
Hi guys,
thanks for your replies, I was installed the rom made by Carbon,
https:// carbon-rom.com/downloads/?device=hammerhead
Here is my installing steps:
1. Backup all of my data,
2. Download the .zip file from the link
3. reboot into the recovery mode
4. triple wipes.
5. install the .zip frm SD card
6. reboot
7. checked the mobile network.
8. Failed (the logo of mobile signal is still the same as "Off" in the "Mobile Network", No "H", "2G", "3G" or "LTE" logo):crying:
Please tell me if I did any wrong steps in there
JACKYCYK said:
Hi guys,
thanks for your replies, I was installed the rom made by Carbon,
https:// carbon-rom.com/downloads/?device=hammerhead
Here is my installing steps:
1. Backup all of my data,
2. Download the .zip file from the link
3. reboot into the recovery mode
4. triple wipes.
5. install the .zip frm SD card
6. reboot
7. checked the mobile network.
8. Failed (the logo of mobile signal is still the same as "Off" in the "Mobile Network", No "H", "2G", "3G" or "LTE" logo):crying:
Please tell me if I did any wrong steps in there
Click to expand...
Click to collapse
After rom flash, flash the carbon gapps: http://www.androidfilehost.com/?fid=23311191640114013
Double check whether the network/apn settings are entered correctly...
You've followed all the steps correctly m8.. not sure what's causing this problem...
Did you try inserting a different sim? May be it's a sim card problem??

4.4.2 KitKat without Orange garbage

This help is obsolete because now it is possible to download Nordic 4.4.2 version I9506XXUCNG3 without Garbadge.
Hi all,
If you want to install a new 4.4.2 without Orange start animation and applications
You have to immediately after flashing 4.4.2 (before start of Android) flash this hidden image from 4.3:
1) Flash hidden.tar.md5 below by ODIN.
hidden.tar.md5
Or if you already start your phone after flashing 4.4.2
1) Flash hidden.tar.md5 above.
2) After that you have to also flash system.tar.md5 from link bellow (I've took it from 4.4.2)
system.tar.md5
3) If you had rooted your phone, you have to root your phone again. (Same with xPosed Installer, Bussybox, Density changer etc.)
I flashed already incl the orange stuff....i tried youz zip via recovery...doesn't let me install
Flash via Odin, not recovery
osdgap said:
I flashed already incl the orange stuff....i tried youz zip via recovery...doesn't let me install
Click to expand...
Click to collapse
Unpack the zip file and flash it by ODIN not by recovery.
Ok thnx
It´s not working. I´ve tryed twice. It doesnt remove orange garbage.
You need to wipe to "activate" new localization files.
mar10o said:
You need to wipe to "activate" new localization files.
Click to expand...
Click to collapse
hello,and how wipe to activate new localization,i don't understand,sorry
Go to settings and restore to factory defaults.
mar10o said:
You need to wipe to "activate" new localization files.
Click to expand...
Click to collapse
mar10o said:
Go to settings and restore to factory defaults.
Click to expand...
Click to collapse
it's not good resolution,we will lose all our data
It's the same thing...
Hi,
I've slightly modified my post about Orange garbadge.
I just did it and got it to work, here's some clearer instructions:
Untick the auto reboot box in Odin (don't tick any other boxes, just have "F. Reset Time" checked, and then flash I9506XXUCNG3_I9506FTMCNG1_I9506XXUCNF3_HOME.tar.md5.
Once it completes (it will say RES for a while afterwards but eventually it will change to "PASS" in a green box) wait a bit and then power off the phone (10 seconds of holding the power button).
Start the phone in download mode the same way you got into it to flash the firmware (home, power and volume down). In Odin tick the Auto Reboot box and then change the File [download] AP from the firmware to the hidden.tar.md5. Hit [START] and once it's all done the phone will reboot.
You'll find if you're coming from 4.3 the phone will say "updating applications" for a while and all of your data and apps should remain intact.
I chose to go to settings and factory reset the phone for a fresh experience but if you don't experience any issues then you should be alright.
I don't know anything about root, recoveries or dev for 4.4.2 so don't ask
For anyone wondering I flashed from a Vodafone Australia i9506 and everything is working perfectly except for the samsung keyboard, I'll probably have to put the APK for google's keyboard and install it manually to be able to test the phone properly but so far it's looking promising.
EDIT: A long work around method to fix the keyboard issue was to use S-Voice to do a google search for the Google Keyboard APK. It downloaded and installed and now I can set up the Play Store and get the up to date version, and continue testing. I will report back in this post.
EDIT 2: After the long process of updating everything I can report that everything works; The camera, GPS, 4G, Wifi, sensors. The only thing that's broken is the "Samsung Hub" application, it launches but then dies. No biggy for me because I use Googles apps (including the Google launcher).
Perfect! Done all like juzza87 said... GUIDE WORKS!!!!
The keyboard doesnt work because of the modification of the hidden and CSC. That´s a known error.
SoRiNuS said:
The keyboard doesnt work because of the modification of the hidden and CSC. That´s a known error.
Click to expand...
Click to collapse
Download and install then Google Keyboard
Hi friends, if you want clear romm without garbage then simply flasf 4.4.2 for Nordic countries(NEE). There are not garbage, stock boot animation and working perfect.
Greetings.
mimahitna said:
Hi friends, if you want clear romm without garbage then simply flasf 4.4.2 for Nordic countries(NEE). There are not garbage, stock boot animation and working perfect.
Greetings.
Click to expand...
Click to collapse
Upload it then.... or give a right link for it
Litle trick,
flash latest 4.3 NEE rom in Odin and upgrade wia software update in phone-OTA...
Greetings
mimahitna said:
Litle trick,
flash latest 4.3 NEE rom in Odin and upgrade wia software update in phone-OTA...
Greetings
Click to expand...
Click to collapse
I cannot downgrade from already flashed 4.4... as by mistake i updraged BOOTLOADER
P.S I tryed it... by the way.... but stuck on BRICK... thought will never get back phone....

GTR7 n7100 tw 4.4.4

reset
Reserved
reset
New developer, Untill now your rom very good and smooth..tomorrow I 'll report to you about battery consumption..Thank you for your rom sir..
reset
”post removed”
reset
7am said:
please don't post that !! you have tested this rom ?
Click to expand...
Click to collapse
I just asked if Radio works but then I've noticed that you mentioned it and I removed my post. I didn't, but I will try it now
Btw, can you please tell me the name of the radio apk and the libs required for it to work? Thanks!
reset
Wifi not working!!!
Wifi Switch is always disable !!
Any Solution ?
reset
Could some1 post AirCommand screenshot with edit options please :fingers-crossed:
Is smart select working/fixed? I remember such bug on other N4 roms
WiFi calling works too? Quick glance/view also?
thx in advance :highfive:
reset
7am said:
no glance(useless). smart select an smart view is ok .
Click to expand...
Click to collapse
Great :good: last question before I flash -> actionmemo has all options enabled when you write on the right side of sheet?
Screenshot would make me happy
7am said:
gtr7 ? make clean install !!! you did something wrong .
Click to expand...
Click to collapse
i did clean flash !!!
i also wiped internal sd card still wifi option is disable.. i m trying to enable it but still its going back to disable !!!
only mobile data is working !!!
for other Roms TW 4.4.4 my wifi is working
is there is any issue as GTR7 is based on S3 ROM ?
need to flash any extra wifi fix patch ?
Recovery i used : TWRP 3.0.2
reset
You are getting me wrong bro!!
a) I wanted to say i have 1st tried with your instructions i.e (wipe-->advanced wipe--->check box to : x_dalvic, x_chache,x_system, x_data. ---->swipe to wipe)
Rom got successfully flashed but i was not able to enable WIFI. that wifi switch is coming back to disable position!!!
b) Then I have tried to Wipe with (wipe-->advanced wipe--->check box to : x_dalvic, x_chache,x_system, x_data. ---->swipe to wipe) + Internal SD option check
Rom got successfully flashed but still its not connecting to WIFI.
WIFI Switch is not getting enable.
Sorry if troubled you !! i Wanted to try this ROM!! Only problem i am facing is wifi issue.
reset
Hows the radio?
reset
reset

Categories

Resources