reset
Reserved
reset
New developer, Untill now your rom very good and smooth..tomorrow I 'll report to you about battery consumption..Thank you for your rom sir..
reset
”post removed”
reset
7am said:
please don't post that !! you have tested this rom ?
Click to expand...
Click to collapse
I just asked if Radio works but then I've noticed that you mentioned it and I removed my post. I didn't, but I will try it now
Btw, can you please tell me the name of the radio apk and the libs required for it to work? Thanks!
reset
Wifi not working!!!
Wifi Switch is always disable !!
Any Solution ?
reset
Could some1 post AirCommand screenshot with edit options please :fingers-crossed:
Is smart select working/fixed? I remember such bug on other N4 roms
WiFi calling works too? Quick glance/view also?
thx in advance :highfive:
reset
7am said:
no glance(useless). smart select an smart view is ok .
Click to expand...
Click to collapse
Great :good: last question before I flash -> actionmemo has all options enabled when you write on the right side of sheet?
Screenshot would make me happy
7am said:
gtr7 ? make clean install !!! you did something wrong .
Click to expand...
Click to collapse
i did clean flash !!!
i also wiped internal sd card still wifi option is disable.. i m trying to enable it but still its going back to disable !!!
only mobile data is working !!!
for other Roms TW 4.4.4 my wifi is working
is there is any issue as GTR7 is based on S3 ROM ?
need to flash any extra wifi fix patch ?
Recovery i used : TWRP 3.0.2
reset
You are getting me wrong bro!!
a) I wanted to say i have 1st tried with your instructions i.e (wipe-->advanced wipe--->check box to : x_dalvic, x_chache,x_system, x_data. ---->swipe to wipe)
Rom got successfully flashed but i was not able to enable WIFI. that wifi switch is coming back to disable position!!!
b) Then I have tried to Wipe with (wipe-->advanced wipe--->check box to : x_dalvic, x_chache,x_system, x_data. ---->swipe to wipe) + Internal SD option check
Rom got successfully flashed but still its not connecting to WIFI.
WIFI Switch is not getting enable.
Sorry if troubled you !! i Wanted to try this ROM!! Only problem i am facing is wifi issue.
reset
Hows the radio?
reset
reset
Related
For fix fix EXYNOS BUG
1.Make a Backup
2.Full wipe
3.Download mode and through ODIN flash this firmware XX LL7 http://www.hotfile.com/dl/187400765/9fda7d4/N7100XXDLL7_N7100OXADLL4_XEF.zip
4. root chainfire http://download.chainfire.eu/264/CF-Root/CF-Auto-Root/CF-Auto-Root-t03g-gtn7100.zip
5.Now you have superuser, not CWM.
6. Trough ODIN flash CWM Chenglu https://hotfile.com/dl/176065007/332cffb/cwm6-recovery-n7100-121014.tar.html
7.flash this Rom or another or restore Backup!
8.Triangle Away if you want
AbyssN2 kernel 1.5.1 Final Stable Version
Deodex
Transparent weather widget and more, see screenshot!:laugh:
]
Info and download:
http://www.nonsolosmartphone.it/post78496.html#p78496
It's compatible with Simplistic Framework V3.0.1 DLL4!
:laugh::silly:
DWNLDNG NOW
I'll try & test it 2NT
:good:You're welcome!:good:
Hello Antonio, thanks for your hard work and time, Ok I installed the official firmware DLL7 by odin to update the bootloader than rooted it installed recovery gave it a complete wipe (data factory reset, system wipe, cache and dalvik wipe), than installed your Rom, it boots up but message pops up as soon as phone starts "set up wizard has stopped working" and the phone restarts.....any help, thank you.
vtec303 said:
Hello Antonio, thanks for your hard work and time, Ok I installed the official firmware DLL7 by odin to update the bootloader than rooted it installed recovery gave it a complete wipe (data factory reset, system wipe, cache and dalvik wipe), than installed your Rom, it boots up but message pops up as soon as phone starts "set up wizard has stopped working" and the phone restarts.....any help, thank you.
Click to expand...
Click to collapse
+1
I have the same problem. I always do a full wipe.
vtec303 said:
Hello Antonio, thanks for your hard work and time, Ok I installed the official firmware DLL7 by odin to update the bootloader than rooted it installed recovery gave it a complete wipe (data factory reset, system wipe, cache and dalvik wipe), than installed your Rom, it boots up but message pops up as soon as phone starts "set up wizard has stopped working" and the phone restarts.....any help, thank you.
Click to expand...
Click to collapse
Mystenes said:
+1
I have the same problem. I always do a full wipe.
Click to expand...
Click to collapse
The full wipe, you have to do when flash the original firmware,for Exynos Bug Fix, then do the root and then my rom!:good:
ok thank you very much, I will give it a try, Regards.
Sent from my GT-N7100 using xda premium
Hello
I have the same problem
Thank u
The amazing rom
The amazing icons
Can you work Theme holds fingerprint includes the upper bar and screen Contact slash black or blue
Thanks again
Excuse use Google translation
majeeed said:
Thank u
The amazing rom
The amazing icons
Can you work Theme holds fingerprint includes the upper bar and screen Contact slash black or blue
Thanks again
Excuse use Google translation
Click to expand...
Click to collapse
No problem, but I love this theme!
araby said:
Hello
I have the same problem
Click to expand...
Click to collapse
Full wipe before flash original firmware, then no wipe for install this rom!:good:
hi there, regarding the abyss kernel, im using the default setting, but my phone seems like turning off automatically ( the led still flashing, only black screen) once every after full charge. I have to press the power button to turn it back on.
do you know what might be the problem ? or maybe the correct settings other than defaults? thanks. been reading the angelo thread in the nss forum but im still clueless , lol
antoniomistretta said:
I suggest to you, to have the new bootloader to flash via Odin the new official firmware, of course after making a backup!:
............................
............................
............................
..................
Click to expand...
Click to collapse
antoniomistretta said:
The full wipe, you have to do when flash the original firmware,for Exynos Bug Fix, then do the root and then my rom!
Click to expand...
Click to collapse
Thank you Antoniomistretta , my old friend , for your great wrk
I DO folow your instructions , and had a smooth instalation without any problems , so far
Keep the GOOD wrk
May GOD bless you
abumhmmd1 said:
Thank you Antoniomistretta , my old friend , for your great wrk
I DO folow your instructions , and had a smooth instalation without any problems , so far
Keep the GOOD wrk
May GOD bless you
Click to expand...
Click to collapse
Thank you, thank you, thank you!:laugh:
For fix fix EXYNOS BUG
1.Make a Backup
2.Full wipe
3.Download mode and through ODIN flash this firmware XX LL7 http://www.hotfile.com/dl/187400765/9fda7d4/N7100XXDLL7_N7100OXADLL4_XEF.zip
4. root chainfire http://download.chainfire.eu/264/CF-Root/CF-Auto-Root/CF-Auto-Root-t03g-gtn7100.zip
5.Now you have superuser, not CWM.
6. Trough ODIN flash CWM Chenglu https://hotfile.com/dl/176065007/332cffb/cwm6-recovery-n7100-121014.tar.html
7.flash this Rom or another or restore Backup!
8.Triangle Away if you want
shinchan162 said:
hi there, regarding the abyss kernel, im using the default setting, but my phone seems like turning off automatically ( the led still flashing, only black screen) once every after full charge. I have to press the power button to turn it back on.
do you know what might be the problem ? or maybe the correct settings other than defaults? thanks. been reading the angelo thread in the nss forum but im still clueless , lol
Click to expand...
Click to collapse
Strange. When you get it, but it should not, if you left everything default, hold for ten seconds, the power button.Or change kernel!
Yesterday:
Hi Antoniomistretta ,
...
I noticed that the battery life is better in this ROM
did you introduced some tweekes , or it is related to XXDLL7 firmware , or I'm just lost
abumhmmd1 said:
Hi Antoniomistretta ,
...
I noticed that the battery life is better in this ROM
did you introduced some tweekes , or it is related to XXDLL7 firmware , or I'm just lost
Click to expand...
Click to collapse
Same old tweaks, my friend. Firmwar is good, kernel is good!:good:
abumhmmd1 said:
Hi Antoniomistretta ,
...
I noticed that the battery life is better in this ROM
did you introduced some tweekes , or it is related to XXDLL7 firmware , or I'm just lost
Click to expand...
Click to collapse
antoniomistretta said:
Same old tweaks, my friend. Firmwar is good , kernel is good !:good:
Click to expand...
Click to collapse
OK
this means .. better battery in this ROM not related to the first one , neither the last one .
and you agree with me ... its related to XXDLL7 firmwar , and added .. the kernel
THANKs
Hi all,
Last night I flashed to hells rom from miui rom, once the flashing is completed i am stuck in roaming
1. IMEI is not corrupted.
2. tried *228 .. but its not working (pop at bottom saying sim is activated, change the roaming settings)
3. flashed back to stock using odin.. still dint work .. still at roaming.
open to suggestions, please adivse.
Data is working but no calls/sms, correct? This happened to me I had to ODIN to an ICS ROM and enter the reprovision code into the dialer. I forget what it is but a google search will surely help you find it.
WARNING: doing the reprovision will wipe your internal memory (external SD will be safe). If you have anything on there you don't want to lose back it up!
/bin/ said:
Hi all,
Last night I flashed to hells rom from miui rom, once the flashing is completed i am stuck in roaming
1. IMEI is not corrupted.
2. tried *228 .. but its not working (pop at bottom saying sim is activated, change the roaming settings)
3. flashed back to stock using odin.. still dint work .. still at roaming.
open to suggestions, please adivse.
Click to expand...
Click to collapse
(using my LiquidSmooth rom as base; you'll have to find your settings)
go into settings >more >mobile nework settings >newtwork mode and insure you are on LTE/CDMA/EVO
> CDMA Subscription (settings?) and make sure you are in RUIM/SIM
reboot, clear cache, dalvik, and for good measures, throw in a fix permissions, and you should be in business.
like i said, not sure where your settings are in HELSROM, but should be similar.
:cyclops:
goldsmitht said:
(using my LiquidSmooth rom as base; you'll have to find your settings)
go into settings >more >mobile nework settings >newtwork mode and insure you are on LTE/CDMA/EVO
> CDMA Subscription (settings?) and make sure you are in RUIM/SIM
reboot, clear cache, dalvik, and for good measures, throw in a fix permissions, and you should be in business.
like i said, not sure where your settings are in HELSROM, but should be similar.
:cyclops:
Click to expand...
Click to collapse
HellsROM is based on the 4.1 OTA, so those options will not be available in settings. The OP could try flashing a 4.2 AOSP ROM to go through the steps you listed, but will probably have to reprovision from an ICS ROM like many others have had to do in his situation. Me included
BattsNotIncld said:
Data is working but no calls/sms, correct? This happened to me I had to ODIN to an ICS ROM and enter the reprovision code into the dialer. I forget what it is but a google search will surely help you find it.
WARNING: doing the reprovision will wipe your internal memory (external SD will be safe). If you have anything on there you don't want to lose back it up!
Click to expand...
Click to collapse
Thank you !! I will update once done.
BattsNotIncld said:
HellsROM is based on the 4.1 OTA, so those options will not be available in settings. The OP could try flashing a 4.2 AOSP ROM to go through the steps you listed, but will probably have to reprovision from an ICS ROM like many others have had to do in his situation. Me included
Click to expand...
Click to collapse
--after rooting am using EZ-UNLOCK to unload boot loader .. its just displaying while screen. Am I missing anthing here ?
BattsNotIncld said:
HellsROM is based on the 4.1 OTA, so those options will not be available in settings. The OP could try flashing a 4.2 AOSP ROM to go through the steps you listed, but will probably have to reprovision from an ICS ROM like many others have had to do in his situation. Me included
Click to expand...
Click to collapse
Thank you very much..triangle diappreaded after reprovision. But am trying to unlock boot loader, ez lock nomore working (display white screen )
any suggestion? I hate to stay in ics touch wiz.
Thanks
If you were to search the threads you would of found your solution.
However you just panic and clogg up XDA.
http://forum.xda-developers.com/showthread.php?t=2066275
[Guide] How to fix roaming/wont activate problem after flashing 4.2.1 rom
sent from that young galaxy on clean ROM!
barrackOBAMA said:
If you were to search the threads you would of found your solution.
However you just panic and clogg up XDA.
http://forum.xda-developers.com/showthread.php?t=2066275
[Guide] How to fix roaming/wont activate problem after flashing 4.2.1 rom
sent from that young galaxy on clean ROM!
Click to expand...
Click to collapse
thank you very much !!, everthing working fine now. but when iam trying to unlock using ez-lock, it showing white screen !! any suggestion on this ?
Thanks
Make sure that you do not dial *228, it will fry your sim card.
/bin/ said:
thank you very much !!, everthing working fine now. but when iam trying to unlock using ez-lock, it showing white screen !! any suggestion on this ?
Thanks
Click to expand...
Click to collapse
Make sure you use ez unlock 1.2. The one from the market is version 1.4 and does not work.
You can download 1.2 from here:
http://rootzwiki.com/topic/32456-app-920-ez-unlock-14-easiest-way-to-unlock-your-bootloader/
I am not able to set screen Pattern lock for my device.
I m experiencing this problem after installing Hathyon ROM (v1.1) and Compact Kernel 1.3 .
When i enter my pattern for 1st time, it asks to re-enter it and then nothing happens.Still the lock screen is swipe to unlock type. Pls help me.
Regards;
Shikhar
shikhar623 said:
I am not able to set screen Pattern lock for my device.
I m experiencing this problem after installing Hathyon ROM (v1.1) and Compact Kernel 1.3 .
When i enter my pattern for 1st time, it asks to re-enter it and then nothing happens.Still the lock screen is swipe to unlock type. Pls help me.
Regards;
Shikhar
Click to expand...
Click to collapse
Try to go back to recovery mode, and wipe data, cache and dalvik cache (optional). But it will delete your data and installed app (on internal storage and sdext). I hope you have backup for it, coz that's the only way (I guess). Good luck..
leonfirdaus said:
Try to go back to recovery mode, and wipe data, cache and dalvik cache (optional). But it will delete your data and installed app (on internal storage and sdext). I hope you have backup for it, coz that's the only way (I guess). Good luck..
Click to expand...
Click to collapse
It would be great if you tell me some way other than erasing my data(apps). :good:
leonfirdaus said:
Try to go back to recovery mode, and wipe data, cache and dalvik cache (optional). But it will delete your data and installed app (on internal storage and sdext). I hope you have backup for it, coz that's the only way (I guess). Good luck..
shikhar623 said:
It would be great if you tell me some way other than erasing my data(apps). :good:
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Well, I guess it's up to you now. Coz I guess that's the only way to reset the Screen Lock.
leonfirdaus said:
Well, I guess it's up to you now. Coz I guess that's the only way to reset the Screen Lock.
Click to expand...
Click to collapse
But the fact is I haven't set the pattern even once. Why do I need to Reset it?
shikhar623 said:
I am not able to set screen Pattern lock for my device.
I m experiencing this problem after installing Hathyon ROM (v1.1) and Compact Kernel 1.3 .
When i enter my pattern for 1st time, it asks to re-enter it and then nothing happens.Still the lock screen is swipe to unlock type. Pls help me.
Regards;
Shikhar
Click to expand...
Click to collapse
shikhar623 said:
But the fact is I haven't set the pattern even once. Why do I need to Reset it?
Click to expand...
Click to collapse
I am sorry for this misunderstanding, I think it's just a bug of your current ROM. I think it's little hard to fix it up, but yeah there's always a way, you need to port it from your previous ROM. Well, if you don't wanna do it by yourself, just hope it will be fixed in next update of your ROM :fingers-crossed:
As you całl this a Bug in this ROM, Is someone else too been facing a similar problem in Hathyon ROM?? if yes pls link it here .
I would be really helpful if you tell me how to perform that port.
Regards,
Shikhar
Flased ROm again thru CWM. Its working fine now!
Thnx fellas
Sent from TheXDApp
Anyone figured out how to fix the WiFi problem on n8000
I have tried to instal dn5_bl_kitkat but it didn't fix the problem
Any help would be appreciated
MoNsTeRmUk said:
Anyone figured out how to fix the WiFi problem on n8000
I have tried to instal dn5_bl_kitkat but it didn't fix the problem
Any help would be appreciated
Click to expand...
Click to collapse
I just flashed those 4 leaked Odin firmware files in latest Odin and everything is working perfectly since then. Bootloader is included in those 4 files, of course.
i had the same issue, just flash the bootloader again in custom recovery
edit: or try this:go to dialpad and call *#0011#; than tap menu, hit wifi and turn "wifi power save mode" off
texten said:
i had the same issue, just flash the bootloader again in custom recovery
Click to expand...
Click to collapse
Still not working -_-
I don't think it's different than what I have already tried before , same size different name
Anyway thank you for trying to help me
MoNsTeRmUk said:
Still not working -_-
I don't think it's different than what I have already tried before , same size different name
Anyway thank you for trying to help me
Click to expand...
Click to collapse
maybe you should try the whole procedure via odin again
and if you want a modded rom, i made a guide:
http://forum.xda-developers.com/showpost.php?p=52461814&postcount=627
texten said:
maybe you should try the whole procedure via odin again
and if you want a modded rom, i made a guide:
http://forum.xda-developers.com/showpost.php?p=52461814&postcount=627
Click to expand...
Click to collapse
I installed the deodoxed rooted frimware from cypher*(I am not sure about the name)
So do you think that I have to install the original one and wipe my data and everything again -_-
My Internet connection is very slow and barely installed this frimware I am using now
So if you have an easier workaround to fix this problem please share it with me
Thanks in advance ^_^
EDIT: I have also tried the wifi power saving thing but nothing happened
MoNsTeRmUk said:
I installed the deodoxed rooted frimware from cypher*(I am not sure about the name)
So do you think that I have to install the original one and wipe my data and everything again -_-
My Internet connection is very slow and barely installed this frimware I am using now
So if you have an easier workaround to fix this problem please share it with me
Thanks in advance ^_^
EDIT: I have also tried the wifi power saving thing but nothing happened
Click to expand...
Click to collapse
Usually is a bootloader problem... I had the same issue and I had resolved it installing a file trough Cwm. Usually you can find it in the download section of KitKat roms
Hi,
In android developement under gnabo rom is a link to fix wifi for 8013, i used it for my 8000 and it worked just fine.
Hope i could help u.
http://forum.xda-developers.com/showthread.php?p=52908279
Rob
Sent from my GT-N8000 using xda premium
I upgraded my N8000 to 4.4.2 but the Wi-Fi network for working and for some reason it changes the proxy settings to manual. Only back to work properly on Wi Fi when I change the proxy for disabled. Someone is going through it?
WiFi WPS
Hi guys,
I have this problem.
In the last few weeks my 10.1 doesn't save the WiFi passwords.
Every time I turn off the device, I need to insert again the password of all the WIFI connections.
how can I fix that problem?
Thanks
hi i have galaxy s6 g920f and it came with problme wifi i test all youtube methode and no result
my problem is that when i turn on wifi it turn off and on automatic and still like that ooff on off on .....
help me plz
clear datta and cache then cache dalvic if you are rooted your phone
if no root access juste go to setting then restore state factory
I do this and now wifi not on any more my phone is rooted and i delete wpa_conflut file. It was in système/bin
abdoufeno said:
I do this and now wifi not on any more my phone is rooted and i delete wpa_conflut file. It was in système/bin
Click to expand...
Click to collapse
Use smart switch to restore to factory settings for reflsash stock rom
godkingofcanada said:
Use smart switch to restore to factory settings for reflsash stock rom
Click to expand...
Click to collapse
I use twrp to beckup and i flach just system and boot and steeel same problème wifi wontt turn on
abdoufeno said:
hi i have galaxy s6 g920f and it came with problme wifi i test all youtube methode and no result
my problem is that when i turn on wifi it turn off and on automatic and still like that ooff on off on .....
help me plz
Click to expand...
Click to collapse
I did experience a similar problem a few months back when I was playing around with a Custom ROM. Although my Wifi appeared to be Flipflopping, that wasn't actually the case. It wasn't holding on to my Wifi network; it used to connect and disconnect from the network while the actual Wifi on my Phone stayed on all the time. I did a clean install using Odin, rooted again and installed the same ROM, and it was fine. A Nand Backup always helps, incase you need it.
arneldna said:
I did experience a similar problem a few months back when I was playing around with a Custom ROM. Although my Wifi appeared to be Flipflopping, that wasn't actually the case. It wasn't holding on to my Wifi network; it used to connect and disconnect from the network while the actual Wifi on my Phone stayed on all the time. I did a clean install using Odin, rooted again and installed the same ROM, and it was fine. A Nand Backup always helps, incase you need it.
Click to expand...
Click to collapse
I use custom rom it steel same problème wifi conact and disconact auto
abdoufeno said:
I use custom rom it steel same problème wifi conact and disconact auto
Click to expand...
Click to collapse
Follow the Good Old method..Flash Stock ROM using Odin, do a clean installation and then try installing the ROM you are using, take a backup of your Apps/Data ,use TB.
abdoufeno said:
I use twrp to beckup and i flach just system and boot and steeel same problème wifi wontt turn on
Click to expand...
Click to collapse
I am suggesting you return to stock ROM. No TWRP no custom anything. Factory Samsung firmware from sammobile that you flashed via odin.. smart switch may work too. It restored my s6 edge