Anyone figured out how to fix the WiFi problem on n8000
I have tried to instal dn5_bl_kitkat but it didn't fix the problem
Any help would be appreciated
MoNsTeRmUk said:
Anyone figured out how to fix the WiFi problem on n8000
I have tried to instal dn5_bl_kitkat but it didn't fix the problem
Any help would be appreciated
Click to expand...
Click to collapse
I just flashed those 4 leaked Odin firmware files in latest Odin and everything is working perfectly since then. Bootloader is included in those 4 files, of course.
i had the same issue, just flash the bootloader again in custom recovery
edit: or try this:go to dialpad and call *#0011#; than tap menu, hit wifi and turn "wifi power save mode" off
texten said:
i had the same issue, just flash the bootloader again in custom recovery
Click to expand...
Click to collapse
Still not working -_-
I don't think it's different than what I have already tried before , same size different name
Anyway thank you for trying to help me
MoNsTeRmUk said:
Still not working -_-
I don't think it's different than what I have already tried before , same size different name
Anyway thank you for trying to help me
Click to expand...
Click to collapse
maybe you should try the whole procedure via odin again
and if you want a modded rom, i made a guide:
http://forum.xda-developers.com/showpost.php?p=52461814&postcount=627
texten said:
maybe you should try the whole procedure via odin again
and if you want a modded rom, i made a guide:
http://forum.xda-developers.com/showpost.php?p=52461814&postcount=627
Click to expand...
Click to collapse
I installed the deodoxed rooted frimware from cypher*(I am not sure about the name)
So do you think that I have to install the original one and wipe my data and everything again -_-
My Internet connection is very slow and barely installed this frimware I am using now
So if you have an easier workaround to fix this problem please share it with me
Thanks in advance ^_^
EDIT: I have also tried the wifi power saving thing but nothing happened
MoNsTeRmUk said:
I installed the deodoxed rooted frimware from cypher*(I am not sure about the name)
So do you think that I have to install the original one and wipe my data and everything again -_-
My Internet connection is very slow and barely installed this frimware I am using now
So if you have an easier workaround to fix this problem please share it with me
Thanks in advance ^_^
EDIT: I have also tried the wifi power saving thing but nothing happened
Click to expand...
Click to collapse
Usually is a bootloader problem... I had the same issue and I had resolved it installing a file trough Cwm. Usually you can find it in the download section of KitKat roms
Hi,
In android developement under gnabo rom is a link to fix wifi for 8013, i used it for my 8000 and it worked just fine.
Hope i could help u.
http://forum.xda-developers.com/showthread.php?p=52908279
Rob
Sent from my GT-N8000 using xda premium
I upgraded my N8000 to 4.4.2 but the Wi-Fi network for working and for some reason it changes the proxy settings to manual. Only back to work properly on Wi Fi when I change the proxy for disabled. Someone is going through it?
WiFi WPS
Hi guys,
I have this problem.
In the last few weeks my 10.1 doesn't save the WiFi passwords.
Every time I turn off the device, I need to insert again the password of all the WIFI connections.
how can I fix that problem?
Thanks
Related
Probably my own noob fault, but I think this is caused by wiping persist and firmware in CWM while attempting to flash CM10.2.
After rebooting wifi does not turn on. I have tried re-flashing stock using both rsdlite and DROID_RAZR_HD_Utility_1.21 several times with no luck. Not sure if this is pertinent, but under advanced wifi options the MAC address is unknown.
My guess is that I have wiped something that is not restored in the stock images.
Obviously, the bootloader is unlocked so returning it is out of the question.
Anyone have any ideas?
Decantur said:
Probably my own noob fault, but I think this is caused by wiping persist and firmware in CWM while attempting to flash CM10.2.
After rebooting wifi does not turn on. I have tried re-flashing stock using both rsdlite and DROID_RAZR_HD_Utility_1.21 several times with no luck. Not sure if this is pertinent, but under advanced wifi options the MAC address is unknown.
My guess is that I have wiped something that is not restored in the stock images.
Obviously, the bootloader is unlocked so returning it is out of the question.
Anyone have any ideas?
Click to expand...
Click to collapse
i had this problem and im currently working on it
dont know if you fixed it but apparently this is how.
and i fixed it
finally
my only problem was sideloading a file explorer and rooting my phone to be able to do this.
hugodefcon said:
i had this problem and im currently working on it
dont know if you fixed it but apparently this is how.
and i fixed it
finally
my only problem was sideloading a file explorer and rooting my phone to be able to do this.
Click to expand...
Click to collapse
I did this same thing when trying to flash cm 11. Any luck fixing it?
cwimer said:
I did this same thing when trying to flash cm 11. Any luck fixing it?
Click to expand...
Click to collapse
I have not found any way to fix this.
Decantur said:
I have not found any way to fix this.
Click to expand...
Click to collapse
Maybe this will help...
http://forum.xda-developers.com/showthread.php?p=47415109&posted=1#post47415109
I'm working on copying that file to /persist at the moment.
cwimer said:
Maybe this will help...
http://forum.xda-developers.com/showthread.php?p=47415109&posted=1#post47415109
I'm working on copying that file to /persist at the moment.
Click to expand...
Click to collapse
Please let me know how it goes.
Good luck.
Decantur said:
Please let me know how it goes.
Good luck.
Click to expand...
Click to collapse
It worked! I copied WCNSS_qcom_wlan_nv.bin to /persist with a root explorer and set the permissions for that file to -rw-rw--- then rebooted.
Download here: http://db.tt/3zIjckrQ
WiFi/4G issue resolved, mostly
So I put that file back into Persist partition and fix the permissions and got WiFi and 4G back, but only have 4G when WiFi is on! As soon as it loses WiFi it also loses 4G, which ironically is when I need it! lol, any idea how to remedy this? And dont get me wrong, i am very happy WiFi is on again. Oh, and when i lose 4G i go to 3G, at least my notification bar data icon displays 3G when WiFi goes out.
[email protected] said:
So I put that file back into Persist partition and fix the permissions and got WiFi and 4G back, but only have 4G when WiFi is on! As soon as it loses WiFi it also loses 4G, which ironically is when I need it! lol, any idea how to remedy this? And dont get me wrong, i am very happy WiFi is on again. Oh, and when i lose 4G i go to 3G, at least my notification bar data icon displays 3G when WiFi goes out.
Click to expand...
Click to collapse
That might be a completely different issue. My LTE is working fine when I turn off the WiFi after this fix.
cwimer said:
It worked! I copied WCNSS_qcom_wlan_nv.bin to /persist with a root explorer and set the permissions for that file to -rw-rw--- then rebooted.
Download here: http://db.tt/3zIjckrQ
Click to expand...
Click to collapse
This worked like a charm! Maybe now I can go to bed....
pzl help
Whats up, my brother gave me his razr maxx hd xt926 yesterday and he wants me to switch it to GSM so he can use ST. I promised him ill do more than that with your phone! well when I got on my computer I was seeing that you cant unlock or get root because he had the latest update, this is what h its running 9.30.1 XT926 4.1.2 build 9.8.1q-94-1 . luckily I got root using saferoot that's one problem down. now I would be glad if anybody could point me in the right direction for the next step I should take to be able to get roms and that cool stuff. the switching to GSM looks like no problems. I know I need a recovery to. should I install a recovery first or do the GSM thing first witch one is best to do first? I already have root and phone is still locked.
So, after I flashed Cyanogenmod 10.1.3 for my Tab 2, it cannot connect to my wifi. I flashed it with the proper procedures, like wiping Data and Dalvik cache, I've installed the Nightly builds to try to eliminate the problem and they kept crashing, so I reverted back to 10.1.3 and still no connection. I've reset my router and made sure that my password was right. Now I have no clue what to do next
Forgive me if this is in the wrong place, I've just signed up today.
Thelitedragon said:
So, after I flashed Cyanogenmod 10.1.3 for my Tab 2, it cannot connect to my wifi. I flashed it with the proper procedures, like wiping Data and Dalvik cache, I've installed the Nightly builds to try to eliminate the problem and they kept crashing, so I reverted back to 10.1.3 and still no connection. I've reset my router and made sure that my password was right. Now I have no clue what to do next
Forgive me if this is in the wrong place, I've just signed up today.
Click to expand...
Click to collapse
Have you tried other ROMs? I've never had any problems connecting to WiFi networks on my p3100 running CM11. I have that issue too on my Ideos X6 phone, but only sometimes, which I think is caused by cheap hardware anyway.
putr4s said:
Have you tried other ROMs? I've never had any problems connecting to WiFi networks on my p3100 running CM11.
Click to expand...
Click to collapse
I'm afraid i also tried Pac-Rom 4.3 and the stock 4.2.2 Touchwhiz rom to no avail.
Does it work with the stock firmware..??
Sent from my GT-I9300 using xda app-developers app
akshaydogra said:
Does it work with the stock firmware..??
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
I've just installed the 4.1.1 firmware and it still does not connect! I might try to install a custom kernel and see if that works.
Thelitedragon said:
I've just installed the 4.1.1 firmware and it still does not connect! I might try to install a custom kernel and see if that works.
Click to expand...
Click to collapse
I've installed This kernel: http://forum.xda-developers.com/showthread.php?t=1661800 Guess what? still doesn't connect. I've run out of ideas. :crying:
Thelitedragon said:
I've installed This kernel: http://forum.xda-developers.com/showthread.php?t=1661800 Guess what? still doesn't connect. I've run out of ideas. :crying:
Click to expand...
Click to collapse
Charge your tab to aprox 70% or more and Try this:
1-download a STOCK firmware file from the internet for your region( the region thing is not necessary, but just for the sake of it )
2- boot into recovery
3- wipe data/flactory reset
4- wipe cache
5-wipe dalvik
6-format /system
7- boot into download mode and flash the STOCK firmware file using ODIN.
i am assuming you have used ODIN before in this case... if you have not, then:
1-download ODIN ( http://samsung-updates.com/Odin307.zip )
2-make sure you have the correct drivers installed
3-connect the device ( in the text box, it should say added)
4- click on the pda option and select the firmware file ( make sure ONLY auto reboot and F.reset time are checked )
5- click on START button to flash the file.
akshaydogra said:
Charge your tab to aprox 70% or more and Try this:
1-download a STOCK firmware file from the internet for your region( the region thing is not necessary, but just for the sake of it )
2- boot into recovery
3- wipe data/flactory reset
4- wipe cache
5-wipe dalvik
6-format /system
7- boot into download mode and flash the STOCK firmware file using ODIN.
i am assuming you have used ODIN before in this case... if you have not, then:
1-download ODIN ( http://samsung-updates.com/Odin307.zip )
2-make sure you have the correct drivers installed
3-connect the device ( in the text box, it should say added)
4- click on the pda option and select the firmware file ( make sure ONLY auto reboot and F.reset time are checked )
5- click on START button to flash the file.
Click to expand...
Click to collapse
Okay, I'll revert to the 4.0.4 stock firmware from http://www.sammobile.com/firmwares/3/?download=5445
Thelitedragon said:
Okay, I'll revert to the 4.0.4 stock firmware from http://www.sammobile.com/firmwares/3/?download=5445
Click to expand...
Click to collapse
It says saved, secured and says connecting with a spinning circle at the top right.
Thelitedragon said:
It says saved, secured and says connecting with a spinning circle at the top right.
Click to expand...
Click to collapse
I don't think its a ROM related issue. There must be some issue with your router itself... try resetting your router and change WPA/WPA2 password once...and reconnect again with new password. give me a feedback so that i can help you further.
lokesh.3440 said:
I don't think its a ROM related issue. There must be some issue with your router itself... try resetting your router and change WPA/WPA2 password once...and reconnect again with new password. give me a feedback so that i can help you further.
Click to expand...
Click to collapse
I reset my router, disabled TKIP encryption and disabled the MAC filter. I live in a house with 5 people so i don't think they would be happy with me doing anything else with the router. I'll try again at my friend's place and see if i can connect to his WEP connection.
Thelitedragon said:
I reset my router, disabled TKIP encryption and disabled the MAC filter. I live in a house with 5 people so i don't think they would be happy with me doing anything else with the router. I'll try again at my friend's place and see if i can connect to his WEP connection.
Click to expand...
Click to collapse
I don't think you would be able to connect to WEP networks..as android versions >2.3.7 does not have access to those networks by default....but you can give that a shot.
Thelitedragon said:
It says saved, secured and says connecting with a spinning circle at the top right.
Click to expand...
Click to collapse
This can be because of the router settings.. And also.. try to use a wifi manager from play store..
akshaydogra said:
This can be because of the router settings.. And also.. try to use a wifi manager from play store..
Click to expand...
Click to collapse
I also changed the my encryption from WPA to WPA2 and used Wifi Manager from an apk. The one from here https://play.google.com/store/apps/details?id=org.kman.WifiManager
It came in a apk that i moved to my tablet to install. Still doesn't work.
I'm losing hope.
I am having the same issue for about a week now. It does not appear to be router related, or software related either.
We have two P3113 tablets in the house, and when mine went wonky - set my daughter's with same software and her's connects without issue.
Rooted, not rooted, stock recovery or custom. Stock software from 4.0.4 to 4.2.2 and custom ROM's as well. Currently running CM 11 on both. One connects while the other does not
I think it may be hardware related
Sent from my iPhone using Tapatalk
bill_in_mtl said:
I am having the same issue for about a week now. It does not appear to be router related, or software related either.
We have two P3113 tablets in the house, and when mine went wonky - set my daughter's with same software and her's connects without issue.
Click to expand...
Click to collapse
Your problem might be related to duplicated mac addreses. Could you check if both tabs have different mac addresses.
This also counts for all others, check if there are no other devices with the same mac.
When I was building CM for both my Xperia L & Tab, they both got the same mac address because they where build on tbe same host.
Tapatalked that sh*t
Joery360 said:
Your problem might be related to duplicated mac addreses. Could you check if both tabs have different mac addresses.
This also counts for all others, check if there are no other devices with the same mac.
When I was building CM for both my Xperia L & Tab, they both got the same mac address because they where build on tbe same host.
Tapatalked that sh*t
Click to expand...
Click to collapse
Mac addresses are different. There is an issue with the IP address on the one that does not connect. It is blank by default, and manually inputting the address does not help
Thanks for the response
sent from my GT-P3113 using Tapatalk HD
I have recently been sent the update to android 4.4.2 on my note pro however my WiFi will not connect now.
I've tried restarting the device and it keeps saying "network connection unavailable".
has anybody else had a similar experience with this device?
ryz4eva said:
I have recently been sent the update to android 4.4.2 on my note pro however my WiFi will not connect now.
I've tried restarting the device and it keeps saying "network connection unavailable".
has anybody else had a similar experience with this device?
Click to expand...
Click to collapse
Use search, here are couple topics about broken wifi after update. Factory reset should fix it.
ryz4eva said:
I have recently been sent the update to android 4.4.2 on my note pro however my WiFi will not connect now.
I've tried restarting the device and it keeps saying "network connection unavailable".
has anybody else had a similar experience with this device?
Click to expand...
Click to collapse
Hi!
Have you got Passpoint running?
This might be a totally different issue but if a factory reset or reflashing doesn´t help you might try looking here.
Regards
Elo
ryz4eva said:
I have recently been sent the update to android 4.4.2 on my note pro however my WiFi will not connect now.
I've tried restarting the device and it keeps saying "network connection unavailable".
has anybody else had a similar experience with this device?
Click to expand...
Click to collapse
I have the same effect!
A full reset won't fix this problem. I contacted Samsung support and the said that I should send them the tablet.
A reset usually isn't sufficient, you need to reflash the firmware.
I fully reset the tablet about 4 times and it suddenly works.
Hi all!
I have exactly the same issue.... I just updated my Note Pro LTE (unrooted) to the latest firmware and I also do not have access to wifi.
Could you please help me? I read in this thread that by reflashing might solve the issue, but since I am not so experienced with that stuff on Android (hence the reason I never rooted), could you please provide detail instructions what exactly I have to do?
Thanks a lot for your great help!
elessar2014 said:
Hi all!
I have exactly the same issue.... I just updated my Note Pro LTE (unrooted) to the latest firmware and I also do not have access to wifi.
Could you please help me? I read in this thread that by reflashing might solve the issue, but since I am not so experienced with that stuff on Android (hence the reason I never rooted), could you please provide detail instructions what exactly I have to do?
Thanks a lot for your great help!
Click to expand...
Click to collapse
I eventually made a factory reset and after everything was finalized, wifi was running again fine. All my apps from play store were installed again automatically and everything seemed to run properly!
However, when I woke up this morning, unfortunately the same issue was present. No network connectivity and all available wifi networks were marked 'not in range'!!
Thus, it seems that factory reset does not solve the problem... Therefore I searched on google how to reflash my tablet. This is the link that I found:
http://androidcentral.us/2014/02/how-to-flash-firmware-using-odin-samsung-devices/
Could you please confirm whether this is the procedure I should follow? If yes, which update should I use? The latest or the previous one, i.e. P905XXUANH3 or P905XXUANC3?
Also, will Knox be tripped if I flash the firmware?
Thanks a lot for your help and I look forward to your responses!
elessar2014 said:
http://androidcentral.us/2014/02/how-to-flash-firmware-using-odin-samsung-devices/
Could you please confirm whether this is the procedure I should follow?
Click to expand...
Click to collapse
Yes.
I usually direct people here: http://forum.xda-developers.com/galaxy-s3/help/guide-odin-flash-guide-t1671969 (It's for the S3, but the procedure is the same everywhere. Make sure you get the most recent version of ODIN. The three buttons have different names (Bootloader/PDA/Phone/CSC are now BL/AP/CP/CSC), but the order is the same.)
If yes, which update should I use? The latest or the previous one, i.e. P905XXUANH3 or P905XXUANC3?
Click to expand...
Click to collapse
You can't downgrade, so use either the one you already have or a newer one.
Also, will Knox be tripped if I flash the firmware?
Click to expand...
Click to collapse
If you use the official firmware for a country in your region, No.
Thanks a lot ShadowLea!!
Eventually there is no need to reflash the tablet....
The only thing I just did was to uncheck the Passpoint option, as Polar67 describes above, in the Advanced Settings of wifi and immediately the issue was fixed!
Thank you all for your great help!!
ShadowLea said:
Yes.
I usually direct people here: http://forum.xda-developers.com/galaxy-s3/help/guide-odin-flash-guide-t1671969 (It's for the S3, but the procedure is the same everywhere. Make sure you get the most recent version of ODIN. The three buttons have different names (Bootloader/PDA/Phone/CSC are now BL/AP/CP/CSC), but the order is the same.)
You can't downgrade, so use either the one you already have or a newer one.
If you use the official firmware for a country in your region, No.
Click to expand...
Click to collapse
elessar2014 said:
Thanks a lot ShadowLea!!
Eventually there is no need to reflash the tablet....
The only thing I just did was to uncheck the Passpoint option, as Polar67 describes above, in the Advanced Settings of wifi and immediately the issue was fixed!
Thank you all for your great help!!
Click to expand...
Click to collapse
Interesting.. Let's remember that solution for when someone else runs into it!
I have a Moto G XT1033 and after a FC the rom stop to work properly, so I tried to flash a new rom and after it I lost my wifi connection, I tried to come back to stock rom but nothing make the wifi connect again, it even turn on, anyone knows how to solve it?
flipeicl said:
I have a Moto G XT1033 and after a FC the rom stop to work properly, so I tried to flash a new rom and after it I lost my wifi connection, I tried to come back to stock rom but nothing make the wifi connect again, it even turn on, anyone knows how to solve it?
Click to expand...
Click to collapse
which custom rom did you flash?
Sent from my XT1033 using XDA-Developers mobile app
khongacc said:
which custom rom did you flash?
Sent from my XT1033 using XDA-Developers mobile app
Click to expand...
Click to collapse
I tried Modified Stock and the modem problem start after a bug with that one, so I tried Dirty Unicorn, AOSP, Temasek and the Stock to come back to factory pattern but no one solve the Wifi problem.
Same problem
I Tried CM13 for Falcon . Recent Nightlies .... 28-05-2016 till 30th .. but after that my wifi stopped working .. It is stuck on Turning ON...
So rolled back to stock. still the same problem.
When I try to turn ON Wifi the slider moves back to off now ..
flipeicl said:
I have a Moto G XT1033 and after a FC the rom stop to work properly, so I tried to flash a new rom and after it I lost my wifi connection, I tried to come back to stock rom but nothing make the wifi connect again, it even turn on, anyone knows how to solve it?
Click to expand...
Click to collapse
i have a solution for you...that's a only one solution exist right now on xda.....
http://forum.xda-developers.com/moto-g/general/tutorial-fix-wi-fi-problem-pc-t3389538
The solution was copy the bluethooth mac address to the file WCNSS_qcom_wlan_factory_nv on /persist.
flipeicl said:
The solution was copy the bluethooth mac address to the file WCNSS_qcom_wlan_factory_nv on /persist.
Click to expand...
Click to collapse
Where is the bluetooth MAC? How did you do that copy? I have a bin file in /persist
matias3569 said:
Where is the bluetooth MAC? How did you do that copy? I have a bin file in /persist
Click to expand...
Click to collapse
where you able to fix the problem? i have same issue wifi is not working after rooting
Wifi is stucked at turning on.... It never turns on.
The mac address is also changed to 02:00:00:... Previously it was something d9:..... It dont remember that.
I saw a youtube video how to fix that https://youtu.be/RHGQn0Av2hI it says that i have to put some file named Wcxxxxxxxxx.bin in root /persist
But when i open persist folder there are no of folders and at the end wifi. But in video of moto g it didnt have any folder. So i placed file in /persist but that didnt help.
He also mentioned in xda thread ( link in description) that this work for moto series.
So can any body guide me what should i do
Or maybe one can upload the wcxxxx.bin file of nexus 5 and its location.
I need help as i m stuck since no wifi.
Thanks in advance
Edit:- any dev can explain what does wcxxxx.bin file does
And can anyone upload that file of nexus 5.
In my phone i have persist/wifi/.macaddr file
Can anyone confirm how many files this folder hai.
Wcxxx.bin is WCNSS_qcom_wlan_nv.bin
Can any one plz provide WCNSS_qcom_wlan_nv.bin file from there persist folder of nexus 5
Only one file in persist /wifi
What os are you running? How did u end up with this mess? Did u upgrade, flash...?
hbenz2008 said:
Only one file in persist /wifi
What os are you running? How did u end up with this mess? Did u upgrade, flash...?
Click to expand...
Click to collapse
I am on aosp santosh build. 26/11 build
I came home and turned on wifi it got connected to home network. But internet was not working on my phone so i turned it off. Then again on. But this time it stucked. At turning wifi on..
Did you try to reflash?
hbenz2008 said:
Did you try to reflash?
Click to expand...
Click to collapse
I reflashed after the wifi problem occured. But it didnt solve it.
Today i noticed that the wpa_supplicant file attached screendhot of it.
Can you help with it.
Is woa fule corrupted??
Are you flashing a custom kernel?
hbenz2008 said:
Are you flashing a custom kernel?
Click to expand...
Click to collapse
No i didnt change kernel. I am with kernel which was with the build.
Should i try any custom kernel
at this point you need your wifi back. Do you have any back up that you can restore? flash official build , or another custom rom, flah a kernel...just get the thing working. I have had that issue before on a different phone after flashing a kernel, something got corrupted so try another.
hbenz2008 said:
at this point you need your wifi back. Do you have any back up that you can restore? flash official build , or another custom rom, flah a kernel...just get the thing working. I have had that issue before on a different phone after flashing a kernel, something got corrupted so try another.
Click to expand...
Click to collapse
Wifi is working again.
I installed certificate from adclear app and rebooted. The reboot was stucked at google logo for around 60-90 seconds and then boot animation started.
i started cleaning my interner storage as i was preparing to backup on pc and flash mra58k image. And uninstalled android authority app. And deleting all the folders that were just eating space.
Any ways thanks for your replies.
My mac address also is reverted back to original one.
The wpa supplicant is also now having around 10-12 lines then my wifi details.
Can anyone explain what happened.
hbenz2008 said:
at this point you need your wifi back. Do you have any back up that you can restore? flash official build , or another custom rom, flah a kernel...just get the thing working. I have had that issue before on a different phone after flashing a kernel, something got corrupted so try another.
Click to expand...
Click to collapse
Wifi agian stopped working same problem imei also reverted back to 02:00:00:00:00 and is stucked at turning on wifi.
[email protected] said:
Wifi agian stopped working same problem imei also reverted back to 02:00:00:00:00 and is stucked at turning on wifi.
Click to expand...
Click to collapse
Beats me man, flash it up
hbenz2008 said:
Beats me man, flash it up
Click to expand...
Click to collapse
I flashed the factory image of mra58k but wifi didnt turn on.
That's marshmallow, try a kernel see what it does
hbenz2008 said:
That's marshmallow, try a kernel see what it does
Click to expand...
Click to collapse
I tried both the elemental and franko kernel it didnt didnt solve the issue.
Its just frustrating
Do u wipe all before flashing except for internal SD? Also, maybe try to flash a kk rom.
hbenz2008 said:
Do u wipe all before flashing except for internal SD? Also, maybe try to flash a kk rom.
Click to expand...
Click to collapse
I wiped befire flahing kernel.
Also tried paranoid v4.45 kitkat rom but in that also wifi didnt worked.
It's not software. It's failing hardware. Your Bluetooth will also stop working, as it's the same chip. Mine does the same thing. I've flashed multiple ROMs and tried changing wifi system files. Nothing has helped...
Sent from my TARDIS
I bought my Nexus 5 the first month it came out. Since then I have never touched the original system or even root it. About a month ago my wifi suddenly stopped working. I have decided to root and flash roms, after factory reset and basic solutions on google didn't work. I have tried a couple of different roms all on android 6 and 7. Wifi still not working. I havent tried flashing kernel and I don't have a file called /persist in the main directory...
EDIT: Cellular data & Bluetooth working.
If changing software and resetting doesn't fix the wifi problem, it's probably a defective wifi chip. I have two nexus 5 motherboards in my desk drawer with no wifi (tries turn on but never does or turns on then off by itself) but cell and Bluetooth work.