I recently purchased an Atrix 2, it's the first Android phone I've had and I love it!
I'm a bit of a techy person, into programming and such, so naturally the idea of flashing custom ROM's caught my attention fairly quickly. I was reading around on the forums and found this thread, installed CWM and managed to boot into recovery mode. I then installed J.Y.Daddy's CWM Recovery on boot. My phone was working perfectly at this point. I rebooted, and made SuperUser deny Atrix 2 Bootstrap. This didn't seem to do anything - I then reboot several times, only to have my phone start up normally (no CWM Recovery). For some idiotic reason I decided to re-allow Atrix 2 Bootstrap in SuperUser, then selected "reboot recovery" manually from the bootstrap application. I installed the last zip file from the aforementioned thread, and rebooted.
Since then, I haven't successfully started my phone. It'll play the entire Motorola boot animation, vibrate once, then start the animation again.
I then ran into the "Low Battery - Cannot Program" error, which I successfully fixed. I downloaded the 2.3.5 FXZ found here and attempted to flash, but I'm getting a new error (see image).
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I'll try to include as much information as I possibly can:
The phone is an Atrix 2
I'm not sure which region New Zealand falls under, but I think it may be SEART
I've tried every option in the Vol Up + Vol Down boot menu, they all loop except for AP Fastboot
My "Carrier" is Telecom
I've search high and low, forums and google, and found nothing. I'm sure it'll be some simple mistake that is considered common knowledge around here, but for now I'm absolutely lost. Any and all help is greatly appreciated!
You should use the fxz for your region..not AT n T fxz..that will solve your problem i guess
Sent from my MB865 using xda app-developers app
Was you on stock 2.3.6? Also, i dont know about your fxz's, but for us when coming from 2.3.6 there is a patch you must use for the original fxz in RSD Lite. It seems you have a softbrick or you are bootlooping. The patch should solve your issue.
Sent from my MB865 using xda app-developers app
I posted this really late at night and forgot to upload the right image! Oh well, I tried a SEARET ROM, and my phone is now working perfectly! :victory:
Thank you, the help was much appreciated
MGinshe said:
I posted this really late at night and forgot to upload the right image! Oh well, I tried a SEARET ROM, and my phone is now working perfectly! :victory:
Thank you, the help was much appreciated
Click to expand...
Click to collapse
Great..have a nice time with your atrix 2
Sent from my MB865 using xda app-developers app
Related
Well i rooted my sisters blaze few days ago and her phones acting up so i need to unroot back to factory state.. its rooted now has custom recovery and custom rom.. i looked around but cant find what im looking for.. please help.. thanks!
You didn't look very hard.
http://forum.xda-developers.com/showthread.php?t=1591601
Don't do it again, or
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
If your having issues with the rom (and not sending the phone back), you could just try and flash a stock or stock based ROM and keep cwm. Its always good to have a backup option.
Cirkustanz said:
You didn't look very hard.
http://forum.xda-developers.com/showthread.php?t=1591601
Don't do it again, or
Click to expand...
Click to collapse
. I tried that way and it messed the phone up.. I did everything it says to the T and it was in a never ending bootloop.. couldnt get past the first screen.. some box kept popping up... So i had to reroot it again.. She needs to send it back tomarrow so i have a day to figure out why and what made that happen.. I used thishttp://forum.xda-developers.com/showthread.php?t=1591601 and phone kept rebooting and sometimes would boot but as soon as the screen came on a box would pop up saying .. android bla bla bla?? She is on ICS.. Any help would be great
Nooblube said:
. I tried that way and it messed the phone up.. I did everything it says to the T and it was in a never ending bootloop.. couldnt get past the first screen.. some box kept popping up... So i had to reroot it again.. She needs to send it back tomarrow so i have a day to figure out why and what made that happen.. I used thishttp://forum.xda-developers.com/showthread.php?t=1591601 and phone kept rebooting and sometimes would boot but as soon as the screen came on a box would pop up saying .. android bla bla bla?? She is on ICS.. Any help would be great
Click to expand...
Click to collapse
Why not download source from samfirmware and flash in odin?
Sent from my SGH-T769 using xda app-developers app
Go here download the uvmb1 stock zip, there's a link for it in the thread flash in Odin http://forum.xda-developers.com/showthread.php?t=2163229
Why send the phone back for a simple fix, if you still have cwm flash a different ROM from a clean install...
Sent from my SGH-T769
Every time i go to update to 4.4.4 it allows me to download the software, but when it goes into recovery TWRP opens and it doesn't update.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
In order to flash an ota update you have to have the stock recovery among other things. You first problem is trying to ota with TWRP.
cntryby429 said:
In order to flash an ota update you have to have the stock recovery among other things. You first problem is trying to ota with TWRP.
Click to expand...
Click to collapse
How do i get rid of TWRP in order to ota update?
Mauler320 said:
How do i get rid of TWRP in order to ota update?
Click to expand...
Click to collapse
Flash the stock recovery. If you've changed any system files, chances are that won't work either. In that case, either revert the changes you've made to whichever system files you've changed or start over and flash a RUU to get back completely to stock.
Also, if you've removed any of Verizon's bloat, it will fail. There's a lot of things like this that can make it fail. If you aren't sure what you've changed and can't put it back the way it was when stock, it's probably easiest to just RUU and get back to stock that way. You'll be starting all over again but it might be easier than trying to figure out what changes you've made that are giving you trouble.
Also, if you're running a custom rom, it will fail. You need to be stock for it to work. S-Off isn't a problem and I don't believe being rooted is either. But the OS itself pretty much needs to be stock.
Trust me when I say that I'm trying to be helpful. You need to do some reading.
You could flash a copy of the stock recovery the same way you flashed twrp and if you didn't modify you system files much/any then you may be able to take the ota after that. Another option would be to run the ruu that doddat posted in his very useful thread. Alternatively, you could just flash 4.4.4 firmware and a sense based rom.
Back to my first point. You are bordering on messing with some things that could seriously cripple your expensive phone and your questions imply that you don't quite know what you're doing. I would recommend you read read read. Read all the stickies in each of the Verizon m8 subforums. Read up on fastboot and adb. You should fully understand the command "fastboot flash <partition> <filename>". It's concerning to not know how to get rid of twrp when you or (worse yet) someone else have already flashed it once.
There are very smart and very helpful people here who will help you if you get into trouble but the responsibility is yours till try and avoid those situations by educating yourself first. Best of luck and happy flashing.
Do u still need help or you got it figured out?
Tigerstown said:
Do u still need help or you got it figured out?
Click to expand...
Click to collapse
I figured it out i just re-flashed stock recovery, updated then re-flashed TWRP and installed Viperone rom
Hi All,
Sorry to bother you but I really had no option, and I had to create a new thread here to seek help.
I am trying to install a new ROM (maybe cyanogen) on my Motorola Razr HD XT925m but I am stuck with some issues. Almost any tutorial says to use motochopper and motopocalypse to do this. I have also found some tutorials that says to use RSDlite to install other ROMS.
The fact is that I can not do any of those procedures.
So far I have:
- Rooted my phone using IRoot and King Root. I was able to root, no issue here.
- Installed TWRP recovery 2.6.3.0 using Flashify. Not sure if it installed sucessfully as you will see below.
Well, after that I was trying to do the next step that is run the motochopper or motopocalypse, and what I see is the message "daemon started successfully" and nothing else happens.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Another thing that several threads mention to do is the WIPEs in the recovery menu. But somehow my recovery has some issues:
- When I try to enter in the recovery, it shows the messages "Failed to hab check for recovery: 0x56 / Fastboot reason: Boot failure"
One last thing I was considering to to is install the Cyanogen using only flashfy. But I do not know if this is possible or I can have more issues with that.
So, that is it. Hope if anyone can help...
Best Regards!
Oscar
UPDATE!!
I just realized that I had to unlock my phone via motorola´s web site
https://motorola-global-portal-pt.custhelp.com/app/standalone/bootloader/unlock-your-device-a
I sucessfully unlocked my phone and installed CM 12.1!
What firmware are you on?
bylithium said:
What firmware are you on?
Click to expand...
Click to collapse
Version 4.4.2
I have just realized my image links are not showing because I still have few posts ( i am not able to post outside links )
Anyway here are my screenshots
h t t p s : // drive.google.com/open?id=0B4bZXMMMEIHaSmtsZjRHVXJLVkE
Are you still having this problem?
bylithium said:
Are you still having this problem?
Click to expand...
Click to collapse
yep :/
chicojara said:
yep :/
Click to expand...
Click to collapse
Have you tried a different PC? or different USB Cable?
bylithium said:
Have you tried a different PC? or different USB Cable?
Click to expand...
Click to collapse
I just realized that I had to unlock my phone via motorola´s web site
https://motorola-global-portal-pt.custhelp.com/app/standalone/bootloader/unlock-your-device-c
I sucessfully unlocked my phone and installed CM 12.1!
I updated my phone to nougat and immediately regretted it. Tried reverting and it worked sort of. Stuck on ancient russian firmware on NXT-L29C636B211. It really sucks and when i flash twrp its stuck at my device is booting. Im not sure what to do at all. Can anyone help me out here? I really need a bail out. I cant use any update packages outside of C636's line of firmwares.
OcazPrime said:
I updated my phone to nougat and immediately regretted it. Tried reverting and it worked sort of. Stuck on ancient russian firmware on NXT-L29C636B211. It really sucks and when i flash twrp its stuck at my device is booting. Im not sure what to do at all. Can anyone help me out here? I really need a bail out. I cant use any update packages outside of C636's line of firmwares.
Click to expand...
Click to collapse
If you flash the twrp for mate 9, this will happen. I tried it and obtained the same effect. I had to flash another twrp from this site
http://forum.xda-developers.com/honor-8/how-to/twrp-nougat-edition-t3504140
It is for the honor 8 but your mate 8 will be able to get into this recovery although not all functions work. However from this recovery you can still reboot, power off, go to recovery or to bootloader.
Ok so i got the twrp working, but now its deciding not to install any rom at all. It does the entire process as if it did and when i check for any install it says theres no OS.
OcazPrime said:
Ok so i got the twrp working, but now its deciding not to install any rom at all. It does the entire process as if it did and when i check for any install it says theres no OS.
Click to expand...
Click to collapse
You cannot use this twrp to install any rom. You need to use the dload method. If you want to go back to emui 4 or 4.1 you need to dload the update.app in the rollback package then dload the emui 4 rom.
OcazPrime said:
I updated my phone to nougat and immediately regretted it. Tried reverting and it worked sort of. Stuck on ancient russian firmware on NXT-L29C636B211. It really sucks and when i flash twrp its stuck at my device is booting. Im not sure what to do at all. Can anyone help me out here? I really need a bail out. I cant use any update packages outside of C636's line of firmwares.
Click to expand...
Click to collapse
What about your phone model?
NXT-L09, NXT-L29, NXT-AL10, NXT-CL00, NXT-DL00 or NXT-TL00
Mentioned on back of your phone like this image:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Good day XDA Developers!
I'm new in this forum, I don't know if this is the proper section to ask about this, hope moderators will understand.
I would like to ask a problem with this phone i received, SM-J320a the problem was you can't flash It always error in custom binary blocked by frp even i flash the official firmware. I can't flash with sboot.bin, system.bin and cache.bin, but if i unselect this three bin files it continues to flash but still hang on logo.
First status
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Download mode details
Status after i try flashing
What should i do first to flashed this phone successfully?
Thanks in advance !
ive been having the same issue for a little less than two weeks.
movsearch said:
Good day XDA Developers!
I'm new in this forum, I don't know if this is the proper section to ask about this, hope moderators will understand.
I would like to ask a problem with this phone i received, SM-J320a the problem was you can't flash It always error in custom binary blocked by frp even i flash the official firmware. I can't flash with sboot.bin, system.bin and cache.bin, but if i unselect this three bin files it continues to flash but still hang on logo.
First status
Download mode details
Status after i try flashing
What should i do first to flashed this phone successfully?
Thanks in advance !
Click to expand...
Click to collapse
i havent been able to get my j320a to downgrade correctly after i flashed the newest firmware on odin. now unless i have my j320a on nouget i am unable to change my mobile apn or even veiw and have incounterd the same message you have received. i am also unfortunitaly at a loss on this seems to be a newly developed outcome for my device
movsearch said:
Good day XDA Developers!
I'm new in this forum, I don't know if this is the proper section to ask about this, hope moderators will understand.
I would like to ask a problem with this phone i received, SM-J320a the problem was you can't flash It always error in custom binary blocked by frp even i flash the official firmware. I can't flash with sboot.bin, system.bin and cache.bin, but if i unselect this three bin files it continues to flash but still hang on logo.
First status
Download mode details
Status after i try flashing
What should i do first to flashed this phone successfully?
Thanks in advance !
Click to expand...
Click to collapse
This is the result of the "anti-rollback" protection feature in the device that prevents earlier (official) versions from being used. You need to find a newer version of the firmware or use the Samsung Kies while it's in the emergency (bootloader) recovery mode.