Database Info

can anyone help me fix my phone with team viewer?

SOLVED - you have got to be kidding me though. i had 2 faulty cables, one was my original cable and another a brand new one. so i used one of my friends and it worked fine. I HATE ELECTRONICS
my drivers dont work and my phone is stuck in boot loop and i CANNOT get into recovery
i just need someone that can get me back to stock :[
PM ME if you can help
heres my problem thread
http://forum.xda-developers.com/showthread.php?t=1353314
VIDEO showing boot loop (same thing if i try 3 button recovery)
http://www.youtube.com/watch?v=n3ALNj5q-hY
VIDEO showing download mode + odin , USB NOT RECOGNIZED usb error 43 device has stopped working
http://www.youtube.com/watch?v=D4CnRnecNrQ
i have deleted all drives so someone can help me fresh

rsx19 said:
my drivers dont work and my phone is stuck in boot loop and i CANNOT get into recovery
i just need someone that can get me back to stock :[
Click to expand...
Click to collapse
Restart your computer and then pull the battery out of your phone and put it back in. Now on your computer open Odin and then hold vol+ and vol- and plug in the USB cord this will put you in downlaod mode. And use Odin to get you back to a stock rom
Currently Fusionized

Wdustin1 said:
Restart your computer and then pull the battery out of your phone and put it back in. Now on your computer open Odin and then hold vol+ and vol- and plug in the USB cord this will put you in downlaod mode. And use Odin to get you back to a stock rom
Currently Fusionized
Click to expand...
Click to collapse
ive had this problem for a week now, it doesnt seem to be that simple. installing new drivers doesnt work, using different usb ports dont work, going into download mode doesnt work, thats why i need someone to try it for me cause i just cant figure it out

there has to be somebody!

Have you read this post ?

studacris said:
Have you read this post ?
Click to expand...
Click to collapse
not related to my post. can anyone help me on teamviewer?

bump + op update

not sure what someone would be able to do remotely to help you with a device you hold in your hand......why havent you tried Heimdall method? ODIN sucks.

Pirateghost said:
not sure what someone would be able to do remotely to help you with a device you hold in your hand......why havent you tried Heimdall method? ODIN sucks.
Click to expand...
Click to collapse
doesnt work either cause my phone isnt recognized by the computer at all so ANYTHING usb based doesnt work and i cant get into recovery so that doesnt work either, i mean i have to be doing something wrong right? the phone cant be dead

Heimdall uses it's own driver so Jake you install that and uninstall all the others, SO that may help with the recognition issue, as the stock closed source driver can be a douche sometimes...like in your case.

studacris said:
Heimdall uses it's own driver so Jake you install that and uninstall all the others, SO that may help with the recognition issue, as the stock closed source driver can be a douche sometimes...like in your case.
Click to expand...
Click to collapse
there is nothing in the drop down menus
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

bump, would be great if someone could help me tomorrow night so i can use my phone in a presentation

rsx19 said:
bump, would be great if someone could help me tomorrow night so i can use my phone in a presentation
Click to expand...
Click to collapse
I've seen that error code 43 on my machine when there's a larger USB issue. Usually two things will correct that - a reboot and switching USB ports.
I would also suggest (if you haven't already) uninstalling all of the drivers you have installed - Samsung- or Heimdall-related, then reboot, then do the Heimdall again.

jmtheiss said:
I've seen that error code 43 on my machine when there's a larger USB issue. Usually two things will correct that - a reboot and switching USB ports.
I would also suggest (if you haven't already) uninstalling all of the drivers you have installed - Samsung- or Heimdall-related, then reboot, then do the Heimdall again.
Click to expand...
Click to collapse
ive tried reinstating and tried all 4 of my laptop ports and all 12 or 14 of my desktop ports. ive tried installing all the different drivers users gave me but that never helped. and as you can eee i cant even install the heimdall drivers
either both my desktop and laptop have something wrong with them or its a user error, thats why i want someone else to help me through team viewer, this thread is moving to slow for me to get anything done

I'll ask the obvious question, just to make sure - Have you tried a different cable?

jmtheiss said:
I'll ask the obvious question, just to make sure - Have you tried a different cable?
Click to expand...
Click to collapse
yup yup that i have done

Ok, I took a quick look at the videos in the OP. Two things I noticed:
- You have the phone plugged in prior to putting it into download mode. It's possible you're just keeping the plug in after putting it there (couldn't see in the video). Try putting the phone in download mode, unhook the cable, then rebooting the computer (leave the phone in DL mode), then hook it up again.
- I saw that you have an ICS build. Do any button combinations get you to recovery (V+/V-/Power, V+/Power)? If so, you might be able to flash another rom.
- You may also want to look for AdamOutler's One-click Unbrick. That might be of some use in your situation.

jmtheiss said:
Ok, I took a quick look at the videos in the OP. Two things I noticed:
- You have the phone plugged in prior to putting it into download mode. It's possible you're just keeping the plug in after putting it there (couldn't see in the video). Try putting the phone in download mode, unhook the cable, then rebooting the computer (leave the phone in DL mode), then hook it up again.
- I saw that you have an ICS build. Do any button combinations get you to recovery (V+/V-/Power, V+/Power)? If so, you might be able to flash another rom.
- You may also want to look for AdamOutler's One-click Unbrick. That might be of some use in your situation.
Click to expand...
Click to collapse
at school writing 2 papers so ill have to try these when i get home
i put the phone in download mode with vol + - while plugging in the cord but ill try the others
no none get me into recovery,
could you link me that one?

rsx19 said:
at school writing 2 papers so ill have to try these when i get home
i put the phone in download mode with vol + - while plugging in the cord but ill try the others
no none get me into recovery,
could you link me that one?
Click to expand...
Click to collapse
Ok, I looked a little more at the one click unbrick, and since you can get to download mode, it doesn't look like the right solution. So.. nevermind that one.
As far as removing the drivers, it's something of a two-step process.
Step one is to plug the phone in, let Windows see it (even if incorrectly), and then go to device manager. From there, find the phone, and uninstall it/remove drivers. Then unplug the phone.
Step two is to go to "Programs and Features" and remove any android/samsung drivers that show up there.
Once you've done that, check to make sure any folders that drivers would have been unpacked into (mine is in C:\usb_driver) has all the Samsung or Heimdall drivers removed (BE CAREFUL WHILE DOING THIS - ONLY REMOVE SAMSUNG/HEIMDALL DRIVERS IF YOU'RE 100% CERTAIN).
Then, reboot the computer, re-run Heimdall to get zadig.exe to do its thing, then connect the phone.
Also, have you considered dual-booting (or using a USB live drive) of Ubuntu? Heimdall seems to be a little happier in Linux, but you'll just need to make sure that Java installs with it.
There's also a really slim chance that if you hook the phone up in download mode, ADB might detect it enough to where you can give the "adb reboot recovery" command.

jmtheiss said:
Ok, I looked a little more at the one click unbrick, and since you can get to download mode, it doesn't look like the right solution. So.. nevermind that one.
As far as removing the drivers, it's something of a two-step process.
Step one is to plug the phone in, let Windows see it (even if incorrectly), and then go to device manager. From there, find the phone, and uninstall it/remove drivers. Then unplug the phone.
Step two is to go to "Programs and Features" and remove any android/samsung drivers that show up there.
Once you've done that, check to make sure any folders that drivers would have been unpacked into (mine is in C:\usb_driver) has all the Samsung or Heimdall drivers removed (BE CAREFUL WHILE DOING THIS - ONLY REMOVE SAMSUNG/HEIMDALL DRIVERS IF YOU'RE 100% CERTAIN).
Then, reboot the computer, re-run Heimdall to get zadig.exe to do its thing, then connect the phone.
Also, have you considered dual-booting (or using a USB live drive) of Ubuntu? Heimdall seems to be a little happier in Linux, but you'll just need to make sure that Java installs with it.
There's also a really slim chance that if you hook the phone up in download mode, ADB might detect it enough to where you can give the "adb reboot recovery" command.
Click to expand...
Click to collapse
ill also try ubuntu since i do have it on a usb drive. my paper isnt getting written well..ll sigh

[Q] Can anyone help unbrick my phone...

I tried running Odin to unbrick back into recovery, but apparently didn't have the drivers installed (to my surprise). I hate to say it but I think I've reached the point of no return...any help would be very much appreciated.
Edit: I can't even get into dl mode and I don't have the samsung logo on the screen anymore...just a phone and computer logo.

May be you are not in dowload mode correctly.
For download mode:
1. remove battery
2. connect phone to computer
3. put battery
4. press volume up and down buttons only (no power button)
Try these steps, hope its helpful.

As far as the driver issue is concerned, downloading "Kies" is the easiest way. The phone doesn't actually work with the software, but the process of installing it will take care of any driver issues.
Search Kies in google to grab the download.

Try one click unbrick ^^ it work on mine
Sent from my SAMSUNG-SGH-I997 using xda premium

terr_bear said:
I tried running Odin to unbrick back into recovery, but apparently didn't have the drivers installed (to my surprise). I hate to say it but I think I've reached the point of no return...any help would be very much appreciated.
Edit: I can't even get into dl mode and I don't have the samsung logo on the screen anymore...just a phone and computer logo.
Click to expand...
Click to collapse
That is a download mode. It's just your Infuse saying man, something ain't right and I ain't going no farther.
Just install the samsung drivers, plug the phone in, let the drivers install and then run Odin.

atrix4nag said:
May be you are not in dowload mode correctly.
For download mode:
1. remove battery
2. connect phone to computer
3. put battery
4. press volume up and down buttons only (no power button)
Try these steps, hope its helpful.
Click to expand...
Click to collapse
According to your directions, I did it correctly...I was at a point where I could get into download mode, but I can't anymore...?
Zaidin said:
As far as the driver issue is concerned, downloading "Kies" is the easiest way. The phone doesn't actually work with the software, but the process of installing it will take care of any driver issues.
Search Kies in google to grab the download.
Click to expand...
Click to collapse
Downloaded kies to my computer...when I synced up it couldn't identify the device. I did a good amount of research before posting here...nothing seems to work
abcvn said:
Try one click unbrick ^^ it work on mine
Sent from my SAMSUNG-SGH-I997 using xda premium
Click to expand...
Click to collapse
I'll give that a shot and let you know how it goes...thanks man
Truckerglenn said:
That is a download mode. It's just your Infuse saying man, something ain't right and I ain't going no farther.
Just install the samsung drivers, plug the phone in, let the drivers install and then run Odin.
Click to expand...
Click to collapse
That's the thing...odin would be a breeze, but I just can't get the right drivers for odin to id it...so I guess my solution would be to get kies to id my phone so I could dl the drivers and run odin, right? Easier said than done I suppose...

Thanks for the feedback guys, I really do appreciate it...

Don't plug in your phone at all. Open up Kies/Kies Mini or whatever you have, and under the options it should have an option to install drivers. Once they are done, close kies, reboot your computer, open up Odin with whatever you are flashing, and then plug your phone into download mode.

nygfan760 said:
Don't plug in your phone at all. Open up Kies/Kies Mini or whatever you have, and under the options it should have an option to install drivers. Once they are done, close kies, reboot your computer, open up Odin with whatever you are flashing, and then plug your phone into download mode.
Click to expand...
Click to collapse
Thanks, I'll give that a try too...

nygfan760 said:
Don't plug in your phone at all. Open up Kies/Kies Mini or whatever you have, and under the options it should have an option to install drivers. Once they are done, close kies, reboot your computer, open up Odin with whatever you are flashing, and then plug your phone into download mode.
Click to expand...
Click to collapse
So I shouldn't sync my phone to get drivers via kies?

terr_bear said:
So I shouldn't sync my phone to get drivers via kies?
Click to expand...
Click to collapse
No, the program itself can install them without the phone, at least kies mini will. Or you can just download the driver from here:
32 bit drivers: http://www.mediafire.com/?0b45zo7o75rc5d5
64 bit drivers: http://www.mediafire.com/?3dh4d6up72me9re

It said I successfully dl'ed the drivers, yet nothing has changed...used kies mini, restarted my comp, and tried to sync, but it still can't recognize the phone...hate to admit it, but I think I've exhausted just about every solution I could find or think of :/

get rid of kies. it's a useless program. also if it's open odin might not work, even if it's open in the background like in the system tray.
the drivers are in the most logical place you could think of. on the samsung website under device support.
http://org.downloadcenter.samsung.c...445/SGH-i997_Infuse4G_USB_Drivers_5_2_0_2.zip
http://www.samsung.com/us/support/downloads/at-t/SGH-I997ZKAATT
use the samsung cable if possible, others should work but on the older moment/intercept style phones a specific cable seems to be required. it couldn't hurt to make sure you have the correct cable.
even if you have the phone + computer screen it doesnt automatically mean you are in download mode. you may still need to do the download mode proceedure from battery pull (to make 100% sure the phone is off before you start the proceedure)
the best way is to
1 open odin
2 pull battery
3 connect the cable
4 phone should be face down
5 hold the volume buttons at the same time
6 with volume buttons depressed slide the battery into place
now you may see dwnload or you may see phone + computer or you may even see a black screen but there is a good chance that if the drivers worked that you will see a yellow box in odin
good luck

terr_bear said:
It said I successfully dl'ed the drivers, yet nothing has changed...used kies mini, restarted my comp, and tried to sync, but it still can't recognize the phone...hate to admit it, but I think I've exhausted just about every solution I could find or think of :/
Click to expand...
Click to collapse
Read what was said. Install drivers, close kies, reboot, open Odin.
Cranky...
KK4

Truckerglenn said:
Read what was said. Install drivers, close kies, reboot, open Odin.
Cranky...
KK4
Click to expand...
Click to collapse
I have tried everything, and windows 7 says the drivers are in place, but nothing happens! Trying heimdale, nothing is happeneing either.

Ryanscool said:
I have tried everything, and windows 7 says the drivers are in place, but nothing happens! Trying heimdale, nothing is happeneing either.
Click to expand...
Click to collapse
Heimdall uses completely different drivers which are installed via the one click heimdall using zadig.exe
---------- Post added at 02:52 PM ---------- Previous post was at 02:51 PM ----------
If you can get to download mode, you are not bricked, and it is an issue on your part.

nygfan760 said:
Heimdall uses completely different drivers which are installed via the one click heimdall using zadig.exe
---------- Post added at 02:52 PM ---------- Previous post was at 02:51 PM ----------
If you can get to download mode, you are not bricked, and it is an issue on your part.
Click to expand...
Click to collapse
I can not get anywhere, but i am installing the 64 bit drivers as im running win 7 64. I will try again, but for anyone else who has no other options and a tiny bit of cash there is some hope http://mobiletechvideos.mybigcommerce.com/samsung-infuse-4g-jtag-brick-repair/ . Suprisingly, this is not a scam as many, many people say it worked for them.

Ryanscool said:
I can not get anywhere, but i am installing the 64 bit drivers as im running win 7 64. I will try again, but for anyone else who has no other options and a tiny bit of cash there is some hope http://mobiletechvideos.mybigcommerce.com/samsung-infuse-4g-jtag-brick-repair/ . Suprisingly, this is not a scam as many, many people say it worked for them.
Click to expand...
Click to collapse
Get UnBrickable mod. That works well. I use it whenever I put my device into download mode. Just send me a pm and ill do it for $30+shipping. UBM lets you upload download mode to a device regardless of its state. I spent alot of time researching the methods and I came up with the mod for this device not too long ago.
UBM is the best option. Here is a demo on a captivate. We rewrote the HIBL for compatibility with the infuse4g

Thanks for all the help guys, but absolutely nothing I tried was working and I was short on time and patience...so you gave in to the JTAG unbrick service. I couldn't stand to pay for a service that I was sure I could perform myself, but when it got down to it, I didn't have time to deal with I all. I can confirm that it is a legit service. Great communication and Josh does quick work of getting things working again...I'm a firm supporter of DIY, but if you do reach the point of no return like I did, it's a very reliable resource.

terr_bear said:
Thanks for all the help guys, but absolutely nothing I tried was working and I was short on time and patience...so you gave in to the JTAG unbrick service. I couldn't stand to pay for a service that I was sure I could perform myself, but when it got down to it, I didn't have time to deal with I all. I can confirm that it is a legit service. Great communication and Josh does quick work of getting things working again...I'm a firm supporter of DIY, but if you do reach the point of no return like I did, it's a very reliable resource.
Click to expand...
Click to collapse
I have a suggestion. I also had this issue. The problem was my main PC. I simply used my old laptop and it worked like a dream. I know thus seems too simple but it has worked for several people.
Use GTGs Ultimate Unbrick on a different computer.
Just my 2¢

[Q] Did I brick my phone? [Solved]

Hello all,
Firstly thank you for the great development and help the community is providing for GS4G. From the time I bought this phone (few weeks ago), I have been playing around with different ROMs. I try GB roms and ICS roms every now and then. Always go back to GB using 1 Click's.
Yesterday when I was going the 1-Click Heimdall, it failed in between with some error. After this, I am unable to boot into the OS or recovery or download mode. It comes to a screen which tells me that the firmware upgrade was interrupted and asks me to use recovery in Kies. I tried this, but Kies does not even recognize my phone anymore. Windows shows my phone as "unknown device". I tried uninstalling and re-installing Kies, but still no use. I hope there is some way to get my phone back.
I read somewhere about a USB Jig that could get you into download mode. I have ordered it from Amazon and it may take a couple of days. Meanwhile, if any of you can help, it would be great. Thanks!

youre soft bricked, this is fixable. The firmware upgrade interrupted screen is the same thing as download mode. try reinstalling the drivers which i think are found in the sgs4g BIBLE thread. after that, plug in your phone and make it go to the firmware upgrade interrupted screen and see if it installs the drivers. read lumin's guide. it explains everything step by step. im going to try to link it here soon.
EDIT: [GUIDES] Fresh out of box Galaxy S 4G | Heimdall One-Click For Dummies
this is lumin30's guide not mine, i just linked it. thank him.

gs_0523 said:
youre soft bricked, this is fixable. The firmware upgrade interrupted screen is the same thing as download mode. try reinstalling the drivers which i think are found in the sgs4g BIBLE thread. after that, plug in your phone and make it go to the firmware upgrade interrupted screen and see if it installs the drivers. read lumin's guide. it explains everything step by step. im going to try to link it here soon.
EDIT: [GUIDES] Fresh out of box Galaxy S 4G | Heimdall One-Click For Dummies
this is lumin30's guide not mine, i just linked it. thank him.
Click to expand...
Click to collapse
Thanks. I had tried eollie's Heimdall Stock KJ6 + Root. But, I don't remember seeing the driver installation window show up. I tried reinstalling the drivers through Kies couple of times and re-booting. But, still didn't work. I will try what you suggested when I get home.

You should be able to fix it. Goodluck

When you are using the heimdall 1 click does zadig not recognize your phone?
Sent from my SGH-T959V using xda premium

TwitchyEye said:
When you are using the heimdall 1 click does zadig not recognize your phone?
Sent from my SGH-T959V using xda premium
Click to expand...
Click to collapse
When I connect my phone, Heimdall does nothing but says "disconnected". Windows shows that "a device has malfunctioned" and shows "unknown device connected".

Do you have the full heimdall?
Sent from my SGH-T959V using xda premium

TwitchyEye said:
Do you have the full heimdall?
Sent from my SGH-T959V using xda premium
Click to expand...
Click to collapse
I used this Heimdall - http://forum.xda-developers.com/showthread.php?t=1822626
I do remember installing drivers through this Heimdall before when the phone was working.

pmattie said:
Windows shows that "a device has malfunctioned" and shows "unknown device connected".
Click to expand...
Click to collapse
Sounds like you need to run zadig.exe in the Drivers folder of the Windows distribution of Heimdall.
If that doesn't work, right-click on (My) Computer, select Manage, then select Device Manager. In the panel that opens, find your device, right-click on it and you can then look at its properties and potential change the driver there.
(Yes, this kind of shenanigans is another of the reasons I really dislike Windows)

Ok so what you should try is downloading the heimdall suite
https://github.com/Benjamin-Dobell/Heimdall/downloads
Extract and open the drivers folder and run zadig. Click devices/show all devices and if your phone is plugged in and in download mode it should see it. Install drivers and it should say drivers successfully installed. Then run your one-click jar file and it should work.
http://forum.xda-developers.com/showthread.php?t=1358498
The downloads in this post will also get you where you wanna go
Somebody tell me if I led this guy wrong
Lol ya beat me to it!
Sent from my SGH-T959V using xda premium

TwitchyEye said:
Ok so what you should try is downloading the heimdall suite
https://github.com/Benjamin-Dobell/Heimdall/downloads
Extract and open the drivers folder and run zadig. Click devices/show all devices and if your phone is plugged in and in download mode it should see it. Install drivers and it should say drivers successfully installed. Then run your one-click jar file and it should work.
...
Click to expand...
Click to collapse
I tried all this. But, still Zadig shows my phone as "unknown device" and does not install drivers for it. Tried USBDview to remove any instance of Samsung & Android from the drivers. But, still does not recognize my device. Any other suggestions.

Try different USB ports on your computer.
Install Ubuntu (not totally kidding on that one, it will install side-by-side with Windows)

When is that jig getting there? One time I had a similar situation and I built myself a jig and it worked like a charm. Phone goes straight into download mode. I dunno if this will resolve your situation but I'm pretty sure this isn't the first time we've seen someone with this problem and then after trying several different computers and USB cables we usually say maybe your phone's USB Jack is messed up? And then the thread goes dead.
Sent from my SGH-T959V using xda premium

Have you uninstalled any drivers? Download and install the drivers from the bible thread if you haven't. Like suggested, try different USB ports and different USB cables. Sometimes it takes more than one try for some reason.

pmattie said:
Any other suggestions.
Click to expand...
Click to collapse
Have you rebooted your comp at all?? If no that might be the problem.

SUCCESS !!
Thanks a lot for all your suggestions.
Here is what worked:
- I opened device manager and uninstalled ALL USB devices (Yes ALL, not just Samsung, Android etc) and unfamiliar Storage devices.
- Then I rebooted once so that all other device drivers could be installed.
- Then I rebooted a second time and let it install any remaining drivers.
- Then I plugged in the phone and it installed the driver and now it started showing the correct device name
- Now, I ran the Heimdall 1-click and it opened offered to re-install drivers. I did this.
- After all this, I was able to get 1-Click GB rom installed and now back to VB.
(I think the key was "uninstall all USB devices" and "reboot TWICE")

glad you got it to work. ive had my share of soft bricks with this device and it always takes something different to get it to run right. im starting to think that my computer is alive because of this reason because it just doesnt like to play nice sometimes. LOL

Help with fixing my phone (Please help)

I am going to give you the complete situation so you guys can help with the best of your ability. Over the summer I was at my Grandmas house with my cousins and we were playing Minecraft on the iPod and iPad. I knew that they had it in the Android market and tried to get it. No luck because it was not compatible with my device (Motorola Fire XT 530). I read up on a tutorial to get any app in the store and that was to change the build.prop settings to nexus x or something so I could get it. I rooted my phone and tried it but it screwed up my keyboard and an error occured on screen. So I went into this program I had and completely deleted the file(build.prop, still have a back up though). I tried to turn on the phone but it was stuck in a boot loop . So it is still in the boot loop and I cant turn on my phone.
Things I have tried so far:
1. Plugging it into my computer (wont show up)
2. Clearing my memory and cache in recovery mode (still wont turn on)
3. ADB (wont show up, not even in recovery mode)
4. Using this tutorial http://forum.xda-developers.com/showthread.php?t=1920446 (Was able to get into the flash mode but MSM Flash 7227 wont install correctly for some reason (have updated drivers))
5. Cant use ODIN because my phone cant go into download mode
6. Using default recovery (not clockwork, dont think I can get it because I cant turn on phone) to update the file (didnt work because apparently Motorola locks there bootloader)
I dont think I left anything else out and am looking for a solution. I also have default recovery which may be an issue.
Thanks a lot for reading
FroggyWoggy25

Edit: Disregard my post

Froggywoggy25 said:
I am going to give you the complete situation so you guys can help with the best of your ability. Over the summer I was at my Grandmas house with my cousins and we were playing Minecraft on the iPod and iPad. I knew that they had it in the Android market and tried to get it. No luck because it was not compatible with my device (Motorola Fire XT 530). I read up on a tutorial to get any app in the store and that was to change the build.prop settings to nexus x or something so I could get it. I rooted my phone and tried it but it screwed up my keyboard and an error occured on screen. So I went into this program I had and completely deleted the file(build.prop, still have a back up though). I tried to turn on the phone but it was stuck in a boot loop . So it is still in the boot loop and I cant turn on my phone.
Things I have tried so far:
1. Plugging it into my computer (wont show up)
2. Clearing my memory and cache in recovery mode (still wont turn on)
3. ADB (wont show up, not even in recovery mode)
4. Using this tutorial http://forum.xda-developers.com/showthread.php?t=1920446 (Was able to get into the flash mode but MSM Flash 7227 wont install correctly for some reason (have updated drivers))
5. Cant use ODIN because my phone cant go into download mode
6. Using default recovery (not clockwork, dont think I can get it because I cant turn on phone) to update the file (didnt work because apparently Motorola locks there bootloader)
I dont think I left anything else out and am looking for a solution. I also have default recovery which may be an issue.
Thanks a lot for reading
FroggyWoggy25
Click to expand...
Click to collapse
First of all you cant use Odin to flash Motorola Devices because it is meant for Samsung phones.
Secondly answer these questions:
1. In PC which OS are you using?
2. Have you tried reinstalling RSD lite then rebooting?
Having stock recovery is no issue because you can't get any other in this phone.
It is easy to get it back working.
I suggest you to try some other PC.
OR
Follow these steps as in order.
1. Uninstall RSD lite.
2. Uninstall Motorola Drivers.
3. Now first install Motorola Drivers the RSD lite.
I think this may work for you.

I am using windows 7 on a laptop which may be the problem because it may be a hub not directly connected to the mother board. Thank you and I will try your suggestion.
Btw thanks for all your help over the last couple days.
I also used this on two other laptops but the MSM Flash still wont install for some unknown reason. So I dont think using RSD lite is the problem.

Here's the solution
I found the solution to your problem.
Download the attachment.
Extract it.
Copy the file in the extracted folder and paste it in C:/windows/system32/drivers
Reboot your PC
And yes you must connect it directly without any hub or something.
Actually these are the RSD lite drivers which I think your PC was unable to install correctly.

Okay I will try this when I get home from school. If this doesnt work could you try sending me the MSM Flash7227 driver?

Froggywoggy25 said:
Okay I will try this when I get home from school. If this doesnt work could you try sending me the MSM Flash7227 driver?
Click to expand...
Click to collapse
It is that one only.
Sent from my XT530 using xda app-developers app

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This is my problem after I plugged in my phone in flash mode

Froggywoggy25 said:
This is my problem after I plugged in my phone in flash mode
Click to expand...
Click to collapse
So locate that to C:/windows/system32/drivers/the-file-i-gave-you
It will install its drivers.
OR
Alternate way is to install Motorola Software Update from here
It will install drivers automatically as it also needs phone to be switched in flash mode(i.e. through flash drivers) to update phone software.

aweosomeabhijeet said:
So locate that to C:/windows/system32/drivers/the-file-i-gave-you
It will install its drivers.
OR
Alternate way is to install Motorola Software Update from here
It will install drivers automatically as it also needs phone to be switched in flash mode(i.e. through flash drivers) to update phone software.
Click to expand...
Click to collapse
This didnt work because to update drivers my computer has to recognize the phone which it cant. I would need the driver Flash MSM7227 for it to work. If you could find that EXACT file on your computer and send it to me that would be great. I tried the two things you stated but it says the phone is not connected so I cant download the updates.
This must be very frustrating for you but thanks for your help.

Sorry to say, but you kill boatloader of your phone. That mean msm7227 device.
Sent from my XT530 using xda app-developers app

If any one wants to send me the download of the drivers use this to find them.
http://www.youtube.com/watch?v=jv60G3wH1N8

Froggywoggy25 said:
This didnt work because to update drivers my computer has to recognize the phone which it cant. I would need the driver Flash MSM7227 for it to work. If you could find that EXACT file on your computer and send it to me that would be great. I tried the two things you stated but it says the phone is not connected so I cant download the updates.
This must be very frustrating for you but thanks for your help.
Click to expand...
Click to collapse
Don't know about the problem.
Maybe 64-bit system.
And don't download moto update. Download and install only Moto software update "tool".
I sent you the same drivers. But I think the problem is my 32-bit system or your 64-bit.
No, I am not frustrated, don't worry. :laugh:
Sent from my XT530 using xda app-developers app
---------- Post added at 04:45 AM ---------- Previous post was at 04:42 AM ----------
nesham said:
Sorry to say, but you kill boatloader of your phone. That mean msm7227 device.
Sent from my XT530 using xda app-developers app
Click to expand...
Click to collapse
Is it so?
I don't think so.
Have you experienced the same?
Sent from my XT530 using xda app-developers app

Check the link how to obtain the right files for the drivers. Second post from the top of page 2
And its unfortunate we are in very different time zones so its one to two posts per day and we have to wait
And Ive been frustrated since July because I still cant believe I deleted that file xD

Froggywoggy25 said:
Check the link how to obtain the right files for the drivers. Second post from the top of page 2
And its unfortunate we are in very different time zones so its one to two posts per day and we have to wait
And Ive been frustrated since July because I still cant believe I deleted that file xD
Click to expand...
Click to collapse
I know that I have given you the same file.
Don't know why it isn't working.
Sent from my XT530 using xda app-developers app

Are you sure? Because a lot of my things had two different files. Mind quickly checking again?

Froggywoggy25 said:
Are you sure? Because a lot of my things had two different files. Mind quickly checking again?
Click to expand...
Click to collapse
See yourself.
This is when my phone is connected in flash mode.

Okay well thanks for checking

Im thinking about getting another phone because this one is bust.
Im thinking about getting this phone again or getting the mytouch 4g non-slide.
Which one would be better?

Froggywoggy25 said:
Im thinking about getting another phone because this one is bust.
Im thinking about getting this phone again or getting the mytouch 4g non-slide.
Which one would be better?
Click to expand...
Click to collapse
Don't buy this crap again
Sent from my XT530 using xda app-developers app

[Q][Solved]Samsung Infuse 4g I997 BootLoader Corrupted, Please HELP!

Hello there friends. I have accidentally corrupted the bootlader of the phone.
I have trying to flash the phone using Odin and in the bootloader I selected AP file. I did not read it carefully.
Now the phone's bootloader is corrupted. It Show this on the screen
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
When I connect it with PC it detects and COM port detects too. Can I repair the bootloader of this phone. Please help me. I will be very grateful.
Thank you

saaqirajput said:
Hello there friends. I have accidentally corrupted the bootlader of the phone.
I have trying to flash the phone using Odin and in the bootloader I selected AP file. I did not read it carefully.
Now the phone's bootloader is corrupted. It Show this on the screen
When I connect it with PC it detects and COM port detects too. Can I repair the bootloader of this phone. Please help me. I will be very grateful.
Thank you
Click to expand...
Click to collapse
If you can still go into download mode, all is not lost
Try the AT&T unbrick using he following mirror page:
http://forum.xda-developers.com/infuse-4g/general/mirror-development-files-t3011627
Hope this helps.

joel.maxuel said:
If you can still go into download mode, all is not lost
Try the AT&T unbrick using he following mirror page:
http://forum.xda-developers.com/infuse-4g/general/mirror-development-files-t3011627
Hope this helps.
Click to expand...
Click to collapse
Last night it was being detected and Com Port was also showing but now it is not. I haven't done anything to the phone between this time.
When I plug in the cable phone detects but com port does not show up. Please guide me. Thanks for your answer

saaqirajput said:
Last night it was being detected and Com Port was also showing but now it is not. I haven't done anything to the phone between this time.
When I plug in the cable phone detects but com port does not show up. Please guide me. Thanks for your answer
Click to expand...
Click to collapse
Silly question...are you in Download Mode now? Easy way to achieve is to pull and reinsert battery, then hold down both volume buttons while plugging in the USB cable.
If you are there and no COM port connection, then are you using a different USB port (or PC) since last time? It is said that Download Mode does not like USB 3.0.
Hope this helps.

joel.maxuel said:
Silly question...are you in Download Mode now? Easy way to achieve is to pull and reinsert battery, then hold down both volume buttons while plugging in the USB cable.
If you are there and no COM port connection, then are you using a different USB port (or PC) since last time? It is said that Download Mode does not like USB 3.0.
Hope this helps.
Click to expand...
Click to collapse
No sir phone it is not getting in download mode.
Like I said last night it was going into download mode today it is not.
Some hardware is detected but com port is not being detected. No samsung port in device manager.
I think the bootloader is corrupted. As I said I opened the PDA file in bootloader section and then very very stupidly pressed the start button.
It flashed 17 percent and then stopped. I then again even more stupidly (like it is even possible to be this much if an idiot, but evidently I am) disconnected pulled the battery out and tried to get into download mode.
It did screen was messed up showing rainbows but Odin detected the phone.
Then I made this post after the first reply I tried to go into download mode so something is detected but not the com port.
So I think it is safe to say that the bootloader is corrupted. Now is there a way to repair the bootloader without the ort jag?
Thank you very much for your answer and your time.

saaqirajput said:
No sir phone it is not getting in download mode.
Like I said last night it was going into download mode today it is not.
Some hardware is detected but com port is not being detected. No samsung port in device manager.
I think the bootloader is corrupted. As I said I opened the PDA file in bootloader section and then very very stupidly pressed the start button.
It flashed 17 percent and then stopped. I then again even more stupidly (like it is even possible to be this much if an idiot, but evidently I am) disconnected pulled the battery out and tried to get into download mode.
It did screen was messed up showing rainbows but Odin detected the phone.
Then I made this post after the first reply I tried to go into download mode so something is detected but not the com port.
So I think it is safe to say that the bootloader is corrupted. Now is there a way to repair the bootloader without the ort jag?
Thank you very much for your answer and your time.
Click to expand...
Click to collapse
Download mode is supposed to be independent of the bootloader, so if you still cannot get into Download Mode, you should luck out with a jig.

joel.maxuel said:
Download mode is supposed to be independent of the bootloader, so if you still cannot get into Download Mode, you should luck out with a jig.
Click to expand...
Click to collapse
Wait you mean even if I have messed up the bootloader I can still get into download mode. Wow this is great news. Thank you very much.
Can you please tell me if I can create this jig thingie, do you know a guide because I am pretty sure I am never going to find one here in my country.
Thank you very much for your help

I have seen some videos looks pretty simple just put a 300 k ohm resistor between the 4th and 5th leg.
I will try and make the jig and post the result tomorrow.
@joel.maxuel thank you very much for your time.

joel.maxuel said:
If you can still go into download mode, all is not lost
Try the AT&T unbrick using he following mirror page:
http://forum.xda-developers.com/infuse-4g/general/mirror-development-files-t3011627
Hope this helps.
Click to expand...
Click to collapse
Hello sir, if I am able to get into download mode will flashing the Phone and PDA files from your package be enough or do I need to find the bootloader too from somewhere?

saaqirajput said:
Hello sir, if I am able to get into download mode will flashing the Phone and PDA files from your package be enough or do I need to find the bootloader too from somewhere?
Click to expand...
Click to collapse
The Unbrick package rescues half-trashed bootloaders (among other things) from what I read in other parts of the forum, so you should be fine. You may, however, need to flash a back to root package (my mirror has option C, albeit in an extracted mess) in order to get system working properly again. When I had my Infuse, it was the Rogers version, so I could never use the AT&T packages (so I never knew first-hand the difference between the unbrick and back-to-stock).
Can cross that bridge when you come to it. Hope this helps.

Okay I am having trouble making a jig. I could not find a proper 301 k resistor to I stiched 3 100k resistors. Somehow it is not working. Maybe the USB connector us faulty. It had four connectors on the main side and 1 on the other.
I will change the USB connector and try again.
Thank you very very much

saaqirajput said:
Okay I am having trouble making a jig. I could not find a proper 301 k resistor to I stiched 3 100k resistors. Somehow it is not working. Maybe the USB connector us faulty. It had four connectors on the main side and 1 on the other.
I will change the USB connector and try again.
Thank you very very much
Click to expand...
Click to collapse
Hmmm, that should work... 301K is pretty specific but there are a lot of variance with resistors, and unless the variance is being amplified by daisy-chaining three 100K's, there shouldn't be a problem. If you have a multimeter, you should check the resistance readout to see if it is off by much.
If not, then it comes back to my original theory. Jacked bootloaders can be modified/restored via ODIN or Heimdall, although the problem screen you have (in the end, a really jacked bootloader) isn't the same as what I was going on (which was the wrong, partially functioning bootloader).
I thought the Download/Odin mode was called off at the Modem level (before the bootloader), but I may be wrong. If so (that is, if your jig does not work), you may need a JTAG service after all.
Sorry for any wasted effort.

I could not find a 5 pin USB connector, I tore apart at least 7 USB cables and all of them ONLY had 4 pins.
I think I am going to have to tear apart the original cable of my S3 and I really really don't want to do that.
I will post the final results on Friday evening

Okay I found a 5 pin connector and made a jig but it did not work. Looks like I a going to have to pay for a jtag service.
Thank you again for all your help

Fixed my Phone
All right I have finally fixed it. The problem was I had some newer or I don't know older driver versions installed. I installed i997 Kies mini and installed the driver that came with that software.
And as soon as I connected the phone while pressing Vol Up + Vol Down computer detected it and odin detected it too. Then I installed your provided firmware.
It is okay now. It is working, there is a rainbow effect every time I turn it on but that is okay. Only recovery is not working. I can't go into recovery.
Everything else is working fine. Thank you very much for all your help.