Database Info

[OTA][S-OFF]OTA_Chacha_HTC_Europe_1.54.401.2-1.33.401.1

hey guys,
I just randomly checked for updates from my stock 1.33 EU ROM and it finds me a 1.54 OTA with Android 2.3.5 update.
Since i am using a ClockworkMod Recovery Image as of now, I would need to shift back to Stock Recovery In order to check out this OTA Update..
I googled a lot to find if this update file was ever noticed before, but i did not find any results on any of the forums.. So i think its kinda new
So, anybody running Stock Recovery can update this from a (unrooted?) S-OFF with a superCID chacha device i think..
Correct me if i am wrong..
Or if you want to shift back from CWM to Stock Recovery, check this >>
http://forum.xda-developers.com/showthread.php?t=1164468
(Credits to Mikevhl and Alex C. for their contributions)
Here is the link to the OTA file >>
http://www.mediafire.com/?111mjddqzda8u2p
Before it gets deleted from the mediafire servers, and if this OTA was worth the find, i would like Alex C. t upload the file to his server for further use of the users here..
INSTRUCTIONS :
1. Install Stock Recovery using CWM
>> Download http://www.mediafire.com/?c39i9ubm11ukggn and rename it to PH06IMG.ZIP and place it in sd card root and install via bootloader
{OR}
install a fresh 1.33 ROM using http://alex.swtesting.ro/downloads/....3033H_7.48.35.14_2_release_204385_signed.exe
2.Rename the OTA_Chacha_HTC_blabla.zip file to update.zip and place it on the SD card root folder.
3. Boot into Bootloader menu (Vol DWN+Power) and select recovery using VOL keys and power button to select.
4. Press Vol Up+Power and install update.zip
5. Wait till update completes.
DEVS, pls post in your comments and changes in this update..
I just found out the OTA file, its upto you guys to find out whats in it and i hope it will be of use to you guys in some way..
thanks again
UPDATE :
you can download a CWM backup of 1.54 here:
http://www.schoelli.cc/media/ChaCha1.54CWM.zip
extract it and put it into root of your sd and restore it via CWM
(CREDITS : schölli)

Will this OTA take my S-OFF..?

sathara said:
Will this OTA take my S-OFF..?
Click to expand...
Click to collapse
I dont think so.. Can any f the DEVs there confirm this pls ??

sathara said:
Will this OTA take my S-OFF..?
Click to expand...
Click to collapse
why should it?
and if it would really happens, just S-OFF it again ))
btw....the download link doesn't work for the 1.33 rom file

confirmed.. it DOES NOT S-ON !!

i am not able to install this update
i installed fresh 1.33 with 1.33....exe
installed afterwards cwm, because the fresh installed wiped it away.
booted into bootloader and then into recovery
wiped dalvik cache and made factory reset
but when i try to install it via zip file it aborts after some time with error 7
It says
E:Error in /sdcard/update.zip
(Status 7)
Installation aborted.

schölli said:
i am not able to install this update
i installed fresh 1.33 with 1.33....exe
installed afterwards cwm, because the fresh installed wiped it away.
booted into bootloader and then into recovery
wiped dalvik cache and made factory reset
but when i try to install it via zip file it aborts after some time with error 7
It says
E:Error in /sdcard/update.zip
(Status 7)
Installation aborted.
Click to expand...
Click to collapse
you cannot install this update via CWM..
Read the OP carefully..
Boot into STOCK RECOVERY.. Not CWM..
ie, install 1.33...exe again and you will get back stock recovery..

abraham89 said:
you cannot install this update via CWM..
Read the OP carefully..
Boot into STOCK RECOVERY.. Not CWM..
ie, install 1.33...exe again and you will get back stock recovery..
Click to expand...
Click to collapse
aaaah now i now what you mean by stock recovery...sry, didn't got it. you mean the original htc recovery with the android figurine and the exclemation mark )
ups my fault

schölli said:
aaaah now i now what you mean by stock recovery...sry, didn't got it. you mean the original htc recovery with the android figurine and the exclemation mark )
ups my fault
Click to expand...
Click to collapse
yea !!! exactly.. u're right

device is back up....now i did it correctly... 1.54 is on the device
CWM is also installable and superuser through CWM works also
su binary update also works this time (which didn't work correctly on 1.52)
i am trying to upload a factory reseted CWM backup
---------- Post added at 01:12 PM ---------- Previous post was at 01:07 PM ----------
you can download a CWM backup of 1.54 here:
http://www.schoelli.cc/media/ChaCha1.54CWM.zip
extract it and put it into root of your sd and restore it via CWM

schölli said:
device is back up....now i did it correctly... 1.54 is on the device
CWM is also installable and superuser through CWM works also
su binary update also works this time (which didn't work correctly on 1.52)
i am trying to upload a factory reseted CWM backup
---------- Post added at 01:12 PM ---------- Previous post was at 01:07 PM ----------
you can download a CWM backup of 1.54 here:
http://www.schoelli.cc/media/ChaCha1.54CWM.zip
extract it and put it into root of your sd and restore it via CWM
Click to expand...
Click to collapse
ill update that to the OP..
Did you notice any changes on this build ??

abraham89 said:
ill update that to the OP..
Did you notice any changes on this build ??
Click to expand...
Click to collapse
nope....everything is a little bit smoother, but i think that was also with the 1.52 version....seems that they only fixed some bugs so far

Oh yeah, nice one.. I'll have to test this as it's official, unlike the leaked ones we had. Great job!
As a side note, you won't get S-ON if you have S-OFF'ed via XTC Clip when doing ROM updates. So it's safe

Alex C. said:
Oh yeah, nice one.. I'll have to test this as it's official, unlike the leaked ones we had. Great job!
As a side note, you won't get S-ON if you have S-OFF'ed via XTC Clip when doing ROM updates. So it's safe
Click to expand...
Click to collapse
we need devs like you to try it out..
I've been using it for two days..
And i feel a very bad WiFi performance.. I dont know if this is ROM dependent..
Can you check that out ??

abraham89 said:
hey guys,
I just randomly checked for updates from my stock 1.33 EU ROM and it finds me a 1.54 OTA with Android 2.3.5 update.
Since i am using a ClockworkMod Recovery Image as of now, I would need to shift back to Stock Recovery In order to check out this OTA Update..
I googled a lot to find if this update file was ever noticed before, but i did not find any results on any of the forums.. So i think its kinda new
So, anybody running Stock Recovery can update this from a (unrooted?) S-OFF with a superCID chacha device i think..
Correct me if i am wrong..
Or if you want to shift back from CWM to Stock Recovery, check this >>
http://forum.xda-developers.com/showthread.php?t=1164468
(Credits to Mikevhl and Alex C. for their contributions)
Here is the link to the OTA file >>
http://www.mediafire.com/?111mjddqzda8u2p
Before it gets deleted from the mediafire servers, and if this OTA was worth the find, i would like Alex C. t upload the file to his server for further use of the users here..
INSTRUCTIONS :
1. Install Stock Recovery using CWM
>> Download http://www.mediafire.com/?c39i9ubm11ukggn and rename it to PH06IMG.ZIP and place it in sd card root and install via bootloader
{OR}
install a fresh 1.33 ROM using http://alex.swtesting.ro/downloads/....3033H_7.48.35.14_2_release_204385_signed.exe
2.Rename the OTA_Chacha_HTC_blabla.zip file to update.zip and place it on the SD card root folder.
3. Boot into Bootloader menu (Vol DWN+Power) and select recovery using VOL keys and power button to select.
4. Press Vol Up+Power and install update.zip
5. Wait till update completes.
DEVS, pls post in your comments and changes in this update..
I just found out the OTA file, its upto you guys to find out whats in it and i hope it will be of use to you guys in some way..
thanks again
UPDATE :
you can download a CWM backup of 1.54 here:
http://www.schoelli.cc/media/ChaCha1.54CWM.zip
extract it and put it into root of your sd and restore it via CWM
(CREDITS : schölli)
Click to expand...
Click to collapse
are there any changes in the new version???

carstenheuer said:
are there any changes in the new version???
Click to expand...
Click to collapse
y do u need to quote the whole post & size5 your words? i felt it kinda rude...
---------- Post added at 11:08 PM ---------- Previous post was at 11:06 PM ----------
schölli said:
device is back up....now i did it correctly... 1.54 is on the device
CWM is also installable and superuser through CWM works also
su binary update also works this time (which didn't work correctly on 1.52)
i am trying to upload a factory reseted CWM backup
---------- Post added at 01:12 PM ---------- Previous post was at 01:07 PM ----------
you can download a CWM backup of 1.54 here:
http://www.schoelli.cc/media/ChaCha1.54CWM.zip
extract it and put it into root of your sd and restore it via CWM
Click to expand...
Click to collapse
so su binary 3.0.3,3.05,3.07 works? gonna give a try thx mate

e.japonica said:
y do u need to quote the whole post & size5 your words? i felt it kinda rude...
---------- Post added at 11:08 PM ---------- Previous post was at 11:06 PM ----------
so su binary 3.0.3,3.05,3.07 works? gonna give a try thx mate
Click to expand...
Click to collapse
sorry!!!
is the default android lockscreen still faulty?

is the default android lockscreen still faulty?
Click to expand...
Click to collapse
what do you mean by faulty? as i don't face any problem with the lock screen in previous version?
---------- Post added at 01:07 AM ---------- Previous post was at 12:48 AM ----------
can i request a clean 1.54 zip without su/or a backup without su? (without any modification) Thanks in advance :0

e.japonica said:
what do you mean by faulty? as i don't face any problem with the lock screen in previous version?
---------- Post added at 01:07 AM ---------- Previous post was at 12:48 AM ----------
can i request a clean 1.54 zip without su/or a backup without su? (without any modification) Thanks in advance :0
Click to expand...
Click to collapse
I am getting another ChaCha today (those are now our new company phones) and i will s-off it, update it to 1.54 and will zip it without any modification tonight.
hope you can wait a little bit )

I'm unable to Install Stock Recovery img, everytime after the bootloader loading the file,
a line saying "parsing PH06IMG.zip" then nothing happened, retun to bootloader,
and cwm image still there

ICS Alpha 2

Somebody told me I need to flash Aplha 2 ICS off Dhiru first before flashing Alpha 3. I think thats why I am struck in blACK SCREEN... Can anybody gimme link to Dhiru's Alpha 2 CM9??

You can find it in fuss's infinitum rom topic.
Sent from my GT-I9003 using XDA

u have to flash from stock rom > cm7 > cm9 ... bla bla bla. finish!!

****man66 said:
u have to flash from stock rom > cm7 > cm9 ... bla bla bla. finish!!
Click to expand...
Click to collapse
Bla..bla..bla??
Can you please give details of how to do it?

at first u have to flash kpe.
the second , root with some kernel such as varrut, uc,etc.
and then copy some cm7's rom and flash it with CWM.
after that make a full wipe through CWM.
finally copy cm9(ics rom that u wanna us) and flash it through CWM too.
good luck,bro

basic thing is I am not able to flash thorugh Odin as its not turning yellow.. in download mode... what to do?

anuragvivek93 said:
basic thing is I am not able to flash thorugh Odin as its not turning yellow.. in download mode... what to do?
Click to expand...
Click to collapse
Give it a few retries.It happened with me.. I plugged out the cable, restarted ODIN, rebooted phone to download mode and Presto!

anuragvivek93 said:
basic thing is I am not able to flash thorugh Odin as its not turning yellow.. in download mode... what to do?
Click to expand...
Click to collapse
sh*t i can't post outside link.
i think u must check your usb cable,bro. (is it broke inside?)
---------- Post added at 02:28 PM ---------- Previous post was at 02:27 PM ----------
rockyddroid said:
Give it a few retries.It happened with me.. I plugged out the cable, restarted ODIN, rebooted phone to download mode and Presto!
Click to expand...
Click to collapse

too many threads...u hv created..so now i shall refrain from answering u... sorry ...
cheers...

[Q] plz post a download link for clockworkmod recovery

hey guys
i want to reflash my cwm recovery (v6.x )but i cant find a download link. i tried cwm manager app but it has no official recovery for i9003
I dont know what information u all about my phone to find a recovery so. . .
iam running xgamerz v3 [4.1.2].
and is there any way to flash a recovery without going into recovery mode ? because i cant iam having an issue with rebooting into recovery.
thanx in advance.

The recovery is merged with the kernel, there r no separated img for recovery for 9003. U can just flash the boot.img from rom zip file but must tar it for odin.
Sent from my Galaxy Nexus using Tapatalk 4

chongns said:
The recovery is merged with the kernel, there r no separated img for recovery for 9003. U can just flash the boot.img from rom zip file but must tar it for odin.
Sent from my Galaxy Nexus using Tapatalk 4
Click to expand...
Click to collapse
yeah ill try this... thanx actually i had posted a thread maybe yesterday title -"cant reboot into recovery" will u plz read tht ull understand what actually happend and reply plz

swapnilpx said:
yeah ill try this... thanx actually i had posted a thread maybe yesterday title -"cant reboot into recovery" will u plz read tht ull understand what actually happend and reply plz
Click to expand...
Click to collapse
upload the boot.img form the rom zip, i try make a odin flashable tar for you to try....:fingers-crossed:

chongns said:
upload the boot.img form the rom zip, i try make a odin flashable tar for you to try....:fingers-crossed:
Click to expand...
Click to collapse
http://db.tt/k1wakDI6 this is the link of boot.img copied from rom pakage i.e. xgamerz v3 installed on my phone . Ill be waiting for ur reply .
And by the way mobile odin cant operate in my phone because of unexpected partition so will it be fine if i flashed the recovery using pc odin -will the partition cause any problem ?

swapnilpx said:
http://db.tt/k1wakDI6 this is the link of boot.img copied from rom pakage i.e. xgamerz v3 installed on my phone . Ill be waiting for ur reply .
And by the way mobile odin cant operate in my phone because of unexpected partition so will it be fine if i flashed the recovery using pc odin -will the partition cause any problem ?
Click to expand...
Click to collapse
Not sure about how, but since dhiru done that before so, it is able to flash kernel using odin. Dhiru had ask some tester to flash test kernel with odin to test backlight bug.
Sent from my Galaxy Nexus using Tapatalk 4
---------- Post added at 08:31 PM ---------- Previous post was at 07:49 PM ----------
swapnilpx said:
http://db.tt/k1wakDI6 this is the link of boot.img copied from rom pakage i.e. xgamerz v3 installed on my phone . Ill be waiting for ur reply .
And by the way mobile odin cant operate in my phone because of unexpected partition so will it be fine if i flashed the recovery using pc odin -will the partition cause any problem ?
Click to expand...
Click to collapse
i found tat is a error on the boot.img you posted like below....when i trying to unpack it using @loSconosciuto unpack script.. wonder why...
to IoSconociuto, would you mind to share your script to make odin flashable tar file for boot.img flashing ? or post the steps to make it ?
for CM alpha with mtd partition version? thanks
gzip: ../bootimg-ramdisk: invalid compressed data--crc error
5254 blocks
729 blocks
gzip: ../bootstrap/ramdisk-recovery.cpio.gz: invalid compressed data--format violated
cpio: premature end of file
Compression: gzip
Click to expand...
Click to collapse

chongns said:
Not sure about how, but since dhiru done that before so, it is able to flash kernel using odin. Dhiru had ask some tester to flash test kernel with odin to test backlight bug.
Sent from my Galaxy Nexus using Tapatalk 4
---------- Post added at 08:31 PM ---------- Previous post was at 07:49 PM ----------
i found tat is a error on the boot.img you posted like below....when i trying to unpack it using @loSconosciuto unpack script.. wonder why...
to IoSconociuto, would you mind to share your script to make odin flashable tar file for boot.img flashing ? or post the steps to make it ?
for CM alpha with mtd partition version? thanks
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?p=38166091&postcount=2
this a link of a tutorial abt how to convert .img to .tar.md5 ... iam not familiar with linux command hope it helps u.. and and and will it be fine if i flash any other cwm version which i9003 supports if it is ok then u can upload one if u have...

swapnilpx said:
http://forum.xda-developers.com/showthread.php?p=38166091&postcount=2
this a link of a tutorial abt how to convert .img to .tar.md5 ... iam not familiar with linux command hope it helps u.. and and and will it be fine if i flash any other cwm version which i9003 supports if it is ok then u can upload one if u have...
Click to expand...
Click to collapse
sorry bro, had to give up on this, need to outstation for few days, btw, i'm not that expect on this, just learning for fun, but you can post in cm alpha thread, and ask @dhiru1620 or @LoLaTiOn for the odin flashable kernel file.
it just need to spend about 15min top to build from source, (sure they have the source)
hope they will help you.

chongns said:
sorry bro, had to give up on this, need to outstation for few days, btw, i'm not that expect on this, just learning for fun, but you can post in cm alpha thread, and ask @dhiru1620 or @LoLaTiOn for the odin flashable kernel file.
it just need to spend about 15min top to build from source, (sure they have the source)
hope they will help you.
Click to expand...
Click to collapse
i guess the boot.img file gave an error bcoz it was corrupted. so i had uploaded a new one http://db.tt/k1wakDI6 and thanx for ur help ill ask for their help

@chongns
Rename boot.img to normalboot.img and run
Code:
tar -cvf kernel_PDA.tar normalboot.img
It's like for stock kernels. If you have to flash bootloaders, efs, pit, param, normalboot and recovery there's no need to do a repartition and the flashable stuff is for both CM and stock. Everything else (system, userdata, cache, modem) require a repartition.
Anyway, I didn't try to unpack the kernel, but if you get that errors it means that the files for recovery are somewhat corrupted. Flashing a kernel with ODIN will fix the problem.
@swapnilpx
Here I uploaded the last 2.6.35 kernel I built for CM10, flashable with ODIN. The file is kernel2_PDA.tar. It should work with the ROM you are running since it's based on my CM10.

loSconosciuto said:
@chongns
Rename boot.img to normalboot.img and run
Code:
tar -cvf kernel_PDA.tar normalboot.img
It's like for stock kernels. If you have to flash bootloaders, efs, pit, param, normalboot and recovery there's no need to do a repartition and the flashable stuff is for both CM and stock. Everything else (system, userdata, cache, modem) require a repartition.
Anyway, I didn't try to unpack the kernel, but if you get that errors it means that the files for recovery are somewhat corrupted. Flashing a kernel with ODIN will fix the problem.
@swapnilpx
Here I uploaded the last 2.6.35 kernel I built for CM10, flashable with ODIN. The file is kernel2_PDA.tar. It should work with the ROM you are running since it's based on my CM10.
Click to expand...
Click to collapse
thanks loSconosciuto, i know that magic, just did not know we can simply rename it.
cause i though it should be different cause CM kernel have 2 stage of compression.

[Q]-How to flash custom rom {NEW TO XPERIA L}

Hey friends
i own an xperia p and im pretty good at flashing and moding!!
my friend wanted to root his xperia l and i tried d way we flash wid xperia p but i get status 7 error wen i flashed fxp cm11 !!its unlocked bootloader and rooted!!
jus let me know if you guys know wat is the error!!
my flashing method was
1.flash the whole ftf firmware and boot up.
2. then we flashed boot.img from fxp334 and booted into cwm
3.now apply zip and installed fxp rom but it said status 7 error.
can u guys help???
BTW WHICH ROM IS BETTER?? FXP OR OFFICIAL CM11??
for xperia p der is no official release or fxp cm11, so i need some suggestions too!!
thanks

vicky2131 said:
Hey friends
i own an xperia p and im pretty good at flashing and moding!!
my friend wanted to root his xperia l and i tried d way we flash wid xperia p but i get status 7 error wen i flashed fxp cm11 !!its unlocked bootloader and rooted!!
jus let me know if you guys know wat is the error!!
my flashing method was
1.flash the whole ftf firmware and boot up.
2. then we flashed boot.img from fxp334 and booted into cwm
3.now apply zip and installed fxp rom but it said status 7 error.
can u guys help???
BTW WHICH ROM IS BETTER?? FXP OR OFFICIAL CM11??
for xperia p der is no official release or fxp cm11, so i need some suggestions too!!
thanks
Click to expand...
Click to collapse
Do 1) wipe data factory reset
2)wipe dalvik
3)wipe cache
4)format system
Both are good but cm has nightlies support..well i personally never used both..vanir aosp,liquid smooth n pac r ones to try

Rohan purohit said:
Do 1) wipe data factory reset
2)wipe dalvik
3)wipe cache
4)format system
Both are good but cm has nightlies support..well i personally never used both..vanir aosp,liquid smooth n pac r ones to try
Click to expand...
Click to collapse
so my steps should be like
1.flash ftf(do i have to uncheck somethin in the flashtool??)
2.boot up
3. wipe cache,dalvik,system,factory reset
4.flash custom rom..
rite bro???

vicky2131 said:
so my steps should be like
1.flash ftf(do i have to uncheck somethin in the flashtool??)
2.boot up
3. wipe cache,dalvik,system,factory reset
4.flash custom rom..
rite bro???
Click to expand...
Click to collapse
First two steps not needed..u should have d just have d recovery that can flash fxp wic is kitkat n ftf is jb..
So just flash a kitkat kernel or philz recovery boot image and d wipe etc..flash ftf if something goes wrong..first do a nandroid backup

Rohan purohit said:
First two steps not needed..u should have d just have d recovery that can flash fxp wic is kitkat n ftf is jb..
So just flash a kitkat kernel or philz recovery boot image and d wipe etc..flash ftf if something goes wrong..first do a nandroid backup
Click to expand...
Click to collapse
ok bro wil try n let u no!!

Rohan purohit said:
First two steps not needed..u should have d just have d recovery that can flash fxp wic is kitkat n ftf is jb..
So just flash a kitkat kernel or philz recovery boot image and d wipe etc..flash ftf if something goes wrong..first do a nandroid backup
Click to expand...
Click to collapse
Hai Bro i did the same but it shows same STATUS 7 ERROR ... Now wat to do??

SHANMU23 said:
Hai Bro i did the same but it shows same STATUS 7 ERROR ... Now wat to do??
Click to expand...
Click to collapse
Are u sure downloaded d correct file?https://www.androidfilehost.com/?fid=23622183712462712
Here's d link ..dl again..
---------- Post added at 12:36 PM ---------- Previous post was at 12:33 PM ----------
SHANMU23 said:
Hai Bro i did the same but it shows same STATUS 7 ERROR ... Now wat to do??
Click to expand...
Click to collapse
Extract d rom zip..n flash boot.img from flashtool..n flash d zip
---------- Post added at 12:40 PM ---------- Previous post was at 12:36 PM ----------
SHANMU23 said:
Hai Bro i did the same but it shows same STATUS 7 ERROR ... Now wat to do??
Click to expand...
Click to collapse
Well that error shouldnt come actually..its when something is wrong with updater script in meta-inf..as its saying!!dl from my link

The best way to avoid that "status 7 error" is by flashing via TWRP..
I"ve always kept this kernel on my device just in cased that i wanted to test Kitkat Roms as i'm regularly using stock JB fw with custom kernel.
Here is link to the kernel
If you're already have recovery, just flash it..
Make sure you read 1st what OP's mention there as it is dual recovery(TWRP & CWM)..If you entered CWM, you'll failed of course..

Do I have to put Kitkat kernel before installing the FXP334 ..BCZ Right now i have Extended kernel v6 which is JB kernel.
Thanks for the Fast reply Bro.
---------- Post added at 04:00 PM ---------- Previous post was at 03:07 PM ----------
faizalotai said:
The best way to avoid that "status 7 error" is by flashing via TWRP..
I"ve always kept this kernel on my device just in cased that i wanted to test Kitkat Roms as i'm regularly using stock JB fw with custom kernel.
Here is link to the kernel
If you're already have recovery, just flash it..
Make sure you read 1st what OP's mention there as it is dual recovery(TWRP & CWM)..If you entered CWM, you'll failed of course..
Click to expand...
Click to collapse
Using CIVIC kernel I tried but it says unable to mount "/system"..while installing cm11.zip

SHANMU23 said:
Do I have to put Kitkat kernel before installing the FXP334 ..BCZ Right now i have Extended kernel v6 which is JB kernel.
Thanks for the Fast reply Bro.
---------- Post added at 04:00 PM ---------- Previous post was at 03:07 PM ----------
Using CIVIC kernel I tried but it says unable to mount "/system"..while installing cm11.zip
Click to expand...
Click to collapse
Yes you need to flash the kitkat kernel first. And then insall fxp zip.
Hit thanks if it helped.

SHANMU23 said:
Do I have to put Kitkat kernel before installing the FXP334 ..BCZ Right now i have Extended kernel v6 which is JB kernel.
Thanks for the Fast reply Bro.
---------- Post added at 04:00 PM ---------- Previous post was at 03:07 PM ----------
Using CIVIC kernel I tried but it says unable to mount "/system"..while installing cm11.zip
Click to expand...
Click to collapse
Thats what i told u in my first post..u need a kk kernel n thats y ur getting d error..n haha u dont need twrp. Lol..!.extract boot.img frm kk rom..frm flashtool select kernel to flash in fastboot mode

Rohan purohit said:
Thats what i told u in my first post..u need a kk kernel n thats y ur getting d error..n haha u dont need twrp. Lol..!.extract boot.img frm kk rom..frm flashtool select kernel to flash in fastboot mode
Click to expand...
Click to collapse
TWRP is another way to flash Kitkat roms without accessing your pc..if the rom already have recoveries, there's no need flashtool and fastboot anymore...Just flash the kernel, at 1st blue light(TWRP),then it will go to red lights(CWM) because it is set to gave an option to user..
I think he's entered CWM thats why he's failing to flash..

faizalotai said:
TWRP is another way to flash Kitkat roms without accessing your pc..if the rom already have recoveries, there's no need flashtool and fastboot anymore...Just flash the kernel, at 1st blue light(TWRP),then it will go to red lights(CWM) because it is set to gave an option to user..
I think he's entered CWM thats why he's failing to flash..
Click to expand...
Click to collapse
Thanks Man Finaly I DID IT!!!!:good::good:

Some help needed

Hi, Yesterday I decided to install a custom rom, but I did not like it that well and I decided to go back, but my phone wont start anymore i get in a bootloop someone can give my the right instructions to go back to stock. I can acces cunstom recovery

did you make a back up before flashing the custom rom? This is rule nr1 that you always do a backup bro.

RiTCHiE007 said:
did you make a back up before flashing the custom rom? This is rule nr1 that you always do a backup bro.
Click to expand...
Click to collapse
I know but something whiped my memory strangly i can puse files to cunstom recovery but i results in a bootlop

reinierkramer said:
I know but something whiped my memory strangly i can puse files to cunstom recovery but i results in a bootlop
Click to expand...
Click to collapse
Well, you can always get the official firmware from the oneplus site and flash that from the recovery
---------- Post added at 01:34 PM ---------- Previous post was at 01:33 PM ----------
reinierkramer said:
I know but something whiped my memory strangly i can puse files to cunstom recovery but i results in a bootlop
Click to expand...
Click to collapse
here you can grab the official firmwares https://downloads.oneplus.com/devices/oneplus-6/ and flash it from the recovery and be done

RiTCHiE007 said:
Well, you can always get the official firmware from the oneplus site and flash that from the recovery
---------- Post added at 01:34 PM ---------- Previous post was at 01:33 PM ----------
here you can grab the official firmwares https://downloads.oneplus.com/devices/oneplus-6/ and flash it from the recovery and be done
Click to expand...
Click to collapse
Allready tried that then i get in a bootlop too

reinierkramer said:
Allready tried that then i get in a bootlop too
Click to expand...
Click to collapse
then try to flash it from adb annd try to flash the boot image first

In the guides section there is a posting for fastboot roms. Use it. It always worked for me

I solved it whith the unbrick guide thanks for the help guys