Related
Ok, so i have had a samsung captivate since last summer. I just did the official froyo update the other day and it was successful with kies mini. I then decided to root it using super1click which also worked successfully. I have superuser, titanium backup with busybox installed, and super manager and terminal emulator. I also successfully got clockworkmod flashed and working.
My problem is that ive got the new cognition rom on my internal sd card, but when i try to flash it with cwm, i get the 3e recovery failure message. Ive been reading various sites today on how to fix this problem, but every site seems to tell me something different. I ask this question here, because it seems to be the most knowledgeable site to go to.
How do i get my rooted captivate, with all the above installed and running, to allow me to flash a new rom and possible a new kernal down the road? Im about to go insane trying to decipher through all the info all the different sites have said. Sorry to write such a novel on a tired subject, but im going crazy. Any help will be GREATLY appreciated. Thanks.
trontheman said:
Ok, so i have had a samsung captivate since last summer. I just did the official froyo update the other day and it was successful with kies mini. I then decided to root it using super1click which also worked successfully. I have superuser, titanium backup with busybox installed, and super manager and terminal emulator. I also successfully got clockworkmod flashed and working.
My problem is that ive got the new cognition rom on my internal sd card, but when i try to flash it with cwm, i get the 3e recovery failure message. Ive been reading various sites today on how to fix this problem, but every site seems to tell me something different. I ask this question here, because it seems to be the most knowledgeable site to go to.
How do i get my rooted captivate, with all the above installed and running, to allow me to flash a new rom and possible a new kernal down the road? Im about to go insane trying to decipher through all the info all the different sites have said. Sorry to write such a novel on a tired subject, but im going crazy. Any help will be GREATLY appreciated. Thanks.
Click to expand...
Click to collapse
If you would have done a search here then you would have found that you need to do one of 2 things.
1. Flash back to 2.1
2. Replace the 3e recovery with one that doesnt check for the sig.
I dont know how to replace the 3e recovery. I think ill go with flashing back to 2.1. Once i dl Odin and flash back to 2.1, then i can flash a new rom or a new kernel? Will it undo everything i've done so far? Thanks for the help.
trontheman said:
I dont know how to replace the 3e recovery. I think ill go with flashing back to 2.1. Once i dl Odin and flash back to 2.1, then i can flash a new rom or a new kernel? Will it undo everything i've done so far? Thanks for the help.
Click to expand...
Click to collapse
Here is a link to the replacement recovery.
Make sure you have the right odin and that your 3 button works right.
Yesh doing this will wipe out everything. Make sure to back up. Do not back up system data at all as when you restore it, it can lead to major issues. Once done with a custom rom it will be wiped clean. You will have to redo contacts, email, and all other settings
Thanks. Would it be okay to just flash a new kernel like speedmod kernal and just use the stock rom? Is that possible to do while im on rooted 2.2? I like the rom just fine, i just want it faster mainly. Thanks again.
trontheman said:
Thanks. Would it be okay to just flash a new kernel like speedmod kernal and just use the stock rom? Is that possible to do while im on rooted 2.2? I like the rom just fine, i just want it faster mainly. Thanks again.
Click to expand...
Click to collapse
To be honest I am not sure. I only had the stock on for a few hours as it was just not that great compared to the 2.2.1 rom that I have been used to running. I need BT voice dial and the added exchange options so 2.2 was not really for me. If you want a stock feel but faster then I would go with COG or one of the other roms based on the kb1 rom.
So I've come to the conclusion that I should just flash back to 2.1 and go from there. I have odin downloaded, but I'm not certain how to use it. Do you guys think I should flash a custom rom from stock, or just flash a kernel with lag fix and delete the bloatware? Thanks.
first flash 2.1 stock to get rid of the damn 3e. custom roms dont replace that always. also most custom roms dont flash with odin.
get a stock rom. read the instructions, flash
trontheman said:
So I've come to the conclusion that I should just flash back to 2.1 and go from there. I have odin downloaded, but I'm not certain how to use it. Do you guys think I should flash a custom rom from stock, or just flash a kernel with lag fix and delete the bloatware? Thanks.
Click to expand...
Click to collapse
If you are getting .zip signature errors when trying to flash a rom (because you are using 3e recovery) you will not be able to flash a kernel.
Supercurio did make a KB1 kernel that is installable via Odin. If you install that, you will also get CWM recovery. Then you can flash anything you want.
Either way you will need an Odin program. Either Odin One Click to flash back to stock 2.1 or Odin v1.7 to flash the Supercurio KB1 Kernel .tar file.
trontheman said:
Thanks. Would it be okay to just flash a new kernel like speedmod kernal and just use the stock rom? Is that possible to do while im on rooted 2.2? I like the rom just fine, i just want it faster mainly. Thanks again.
Click to expand...
Click to collapse
Correct me if i'm wrong but I think the speedmod kernal is i9000 based which would cause a major headache/bootloop on the stock rom.
Sent from my SAMSUNG-SGH-I897 using XDA App
Johnnie5000 said:
Correct me if i'm wrong but I think the speedmod kernal is i9000 based which would cause a major headache/bootloop on the stock rom.
Sent from my SAMSUNG-SGH-I897 using XDA App
Click to expand...
Click to collapse
....it works fine on stock 2.2, as does any other 2.2/2.2.1 kernel
Pirateghost said:
....it works fine on stock 2.2, as does any other 2.2/2.2.1 kernel
Click to expand...
Click to collapse
The problem is, the OP has no idea what he's doing. It sounds like he's wanting to flash to 2.1, then add a I9000 kernel. Since he's all over the place, it's hard to decipher what he's thinking.
To the OP. I'd HIGHLY suggest you look for the stickied "how to" video's by Connexxion. They will tell you what you need to do and show you EXACTLY how to do it. Invaluable info for the noobs.
Here is the link your looking for, download the installer zip file at the bottom of the first post. Extract to your fancy, use the install.bat file once extracted. Be sure to have the phone connect to the pc (DO NOT MOUNT) and have USB Debugging on.
Modded 3e recovery that works like 2e
trontheman said:
Ok, so i have had a samsung captivate since last summer. I just did the official froyo update the other day and it was successful with kies mini. I then decided to root it using super1click which also worked successfully. I have superuser, titanium backup with busybox installed, and super manager and terminal emulator. I also successfully got clockworkmod flashed and working.
My problem is that ive got the new cognition rom on my internal sd card, but when i try to flash it with cwm, i get the 3e recovery failure message. Ive been reading various sites today on how to fix this problem, but every site seems to tell me something different. I ask this question here, because it seems to be the most knowledgeable site to go to.
How do i get my rooted captivate, with all the above installed and running, to allow me to flash a new rom and possible a new kernal down the road? Im about to go insane trying to decipher through all the info all the different sites have said. Sorry to write such a novel on a tired subject, but im going crazy. Any help will be GREATLY appreciated. Thanks.
Click to expand...
Click to collapse
I am wanting to flash back to 2.1 and go from there. I have the drivers installed and I have odin downloaded. I tried it last night, but I couldn't get it to work. I got it to download mode, but still nothing. What could the problem be? Thanks.
I tried odin one click again today, but still nothing. All i want to do is flash back to 2.1, root, then flash a rom or custom kernel. Im losing my mind, any more help is greatly appreciated. Thanks.
Bump. Thanks.
trontheman said:
I tried odin one click again today, but still nothing. All i want to do is flash back to 2.1, root, then flash a rom or custom kernel. Im losing my mind, any more help is greatly appreciated. Thanks.
Click to expand...
Click to collapse
ok no need to flash 2.1
get neldars kernel flashing app from the market
get a kernel for froyo without 3e recovery in the dev section. this one is great
http://forum.xda-developers.com/attachment.php?attachmentid=547852&d=1300708475
use neldars app (edit) "sgs kernel flasher" or something to that effect. to flash this kernel
then flash cognition
you can also use odin3 but not the oneclick downloader without the .pit file and flash the same kernel placed in the pda slot.
when you installed keis mini, it installed new WRONG drivers (for odin)
reinstall the original other drivers.
BUT. in your OP all you wanted was to be able to flash COG or something.
ALL you have to do is fix your 3e recovery, SEVERAL people including myself have told you how to fix it. then CWM will work! you dont need a computer to fix 3e if you have root explorer (google it $) .
if you are going to flash a custom rom anyway dont bother going back to 2.1.
if you are going to stay stock, 2.2 is better anyway. (aside from 3e but staying stock dont matter)
you can also use odin3 but not the oneclick downloader without the .pit file and the same kernel placed in the pda slot.
Click to expand...
Click to collapse
@ dani - dude read the thread. odin doesn't recognize his phone.!! try to catch up before butting in...
well that doesn't make my whole post irrelivent. if he is rooted and has busy box he can use neldars kernel flasher. sorry if i over looked something.
Ok, well i got the aio toolbox, and i flashed back to stock. Now im running 2.1-update1. How do i go about rooting now? I cant seem to find a root file. Thanks.
I rooted my Nexus S 4G and was running MIUI but decided to go back to the stock ROM for awhile. When attempting to go back over to MIUI, I can no longer get into Recovery and now the stock ROM won't boot either, stuck on loading animation.
I'm on a Mac, is there anything I can do? Thanks
redsprocket said:
I rooted my Nexus S 4G and was running MIUI but decided to go back to the stock ROM for awhile. When attempting to go back over to MIUI, I can no longer get into Recovery and now the stock ROM won't boot either, stuck on loading animation.
I'm on a Mac, is there anything I can do? Thanks
Click to expand...
Click to collapse
Boot into boot loader. Use fastboot to flash a recovery. Reinstall your rom of choice.
Thanks, I was able to get Recovery working again and after trying a few things was able to get back into my ROM, but I'm still not able to flash back and forth different ROMs. Seems my root isn't sticking with this method:
http://forum.xda-developers.com/showthread.php?t=970237
The root file on there is for ecalir/froyo only. Go into rm>download rom> superuser and download "superuser 2.3.6.3 efgh" and that should work.
Sent from my Nexus S 4G using xda premium
redsprocket said:
Thanks, I was able to get Recovery working again and after trying a few things was able to get back into my ROM, but I'm still not able to flash back and forth different ROMs. Seems my root isn't sticking with this method:
http://forum.xda-developers.com/showthread.php?t=970237
Click to expand...
Click to collapse
did you wipe data(factory reset) before flashing different roms? you have to. you dont need to wipe data only when updating the same rom.
Ahhh, that must be my problem. I got so used to not wiping on MIUI that I assumed I could jump between ROMs without wiping. Thank you and apologies for the remedial posts.
redsprocket said:
Ahhh, that must be my problem. I got so used to not wiping on MIUI that I assumed I could jump between ROMs without wiping. Thank you and apologies for the remedial posts.
Click to expand...
Click to collapse
no apologies needed, thats why we're here
i flashed EP4P stock, deodexed, debloated and rooted and all was good for a couple of weeks. 2 days ago i was able to use barnacle but i went to use it today and it says i do not have root privliges so i wnet to superuser to check for an update and it says i do not have root. tried restarting phone and thats about it. anyone know why this happened and how i can fix it?
I think the easiest thing to do would be to reflash the rom. Is it an ODIN only flash or do they have a CWM flash posted as well?
nailem said:
i flashed EP4P stock, deodexed, debloated and rooted and all was good for a couple of weeks. 2 days ago i was able to use barnacle but i went to use it today and it says i do not have root privliges so i wnet to superuser to check for an update and it says i do not have root. tried restarting phone and thats about it. anyone know why this happened and how i can fix it?
Click to expand...
Click to collapse
http://androidsu.com/superuser/
Flash this in your recovery.
thank you for the quick replies.
i am new to roots and have only used odin twice.
i really hate to reflash with odin only because it is a pain to get everything back to how i want it. but if i have to i will.
i have never user CWM. so i will do some searches for how to unless you can point me in the right direction.
i assume i need to flash the superuser into the recovery with CWM????
i do have superuser that showed up after i flashed 2.3.6 and i tried reinstalling it and still the same thing
nailem said:
thank you for the quick replies.
i am new to roots and have only used odin twice.
i really hate to reflash with odin only because it is a pain to get everything back to how i want it. but if i have to i will.
i have never user CWM. so i will do some searches for how to unless you can point me in the right direction.
i assume i need to flash the superuser into the recovery with CWM????
i do have superuser that showed up after i flashed 2.3.6 and i tried reinstalling it and still the same thing
Click to expand...
Click to collapse
you have to use Odin to flash CWM, then immediately boot into CWM after and flash that superuser.zip file... if still nothing download/update it from the market
sent from my Acer Iconia A500 tablet via XDA app
thanks used CWM to flash .zip and it worked
i get an error when trying to flash the .zip file
something about the file is incorrect
i can flash it again and post the exact error if it helps
bibntziu said:
i get an error when trying to flash the .zip file
something about the file is incorrect
i can flash it again and post the exact error if it helps
Click to expand...
Click to collapse
it was probably a bad download, redownload and try flashing again
I am completely new to rooting. I tried to use super one click on my charge after it was updated to 2.3.6 and it failed, so from what I understand, one click methods are out for now. I want to root my phone still, so where would I start? And would that method involve me having to do a factory reset? Thank you
How to root your Droid Charge
I received notice this morning that a firmware update was ready to install. I chose to install it and the tablet rebooted and start to apply the update. However, it gets to 32% on the update install, stalls, and then reboots and does the exact same thing.
Any thoughts on a solution?
rrhutch said:
I received notice this morning that a firmware update was ready to install. I chose to install it and the tablet rebooted and start to apply the update. However, it gets to 32% on the update install, stalls, and then reboots and does the exact same thing.
Any thoughts on a solution?
Click to expand...
Click to collapse
i have the same problm :crying:
Need more info than that.
For example... Are you rooted or stock?
If rooted, there are a couple of reasons off hand I can think of you could be having a problem.
If you're stock, well... All I can think of is wave your hands in the air, and wave them like you just don't care. Pretty sure that won't fix the problem though, but if it does, report back! xD
I'm rooted.
Sent from my DROID RAZR using xda app-developers app
exactly the same problem
I have the exact same problem.
GT-N8013, rooted, stock rom with root injected.
I called Samsung tech service and they said I should send my device to them.
The only way I can get out of this "update->reboot->update->reboot->..." infinite loop is to get into ODIN mode. (I can't turn off the device)
I decided to re-flash my rom (stock rom with root injected) in ODIN mode, but it does not have any effect and the device is still on this infinite loop. I'm worried if I messed up the device even more by doing that.
ytdong said:
I have the exact same problem.
GT-N8013, rooted, stock rom with root injected.
I called Samsung tech service and they said I should send my device to them.
The only way I can get out of this "update->reboot->update->reboot->..." infinite loop is to get into ODIN mode. (I can't turn off the device)
I decided to re-flash my rom (stock rom with root injected) in ODIN mode, but it does not have any effect and the device is still on this infinite loop. I'm worried if I messed up the device even more by doing that.
Click to expand...
Click to collapse
I'm in the same situation.
I'm going to try http://forum.xda-developers.com/showthread.php?t=1849994
when I get home tonight to see if this fixes it.
Is there any way I can at least access the internal storage somehow and copy my data?
There are some important job application info in S Note..
ytdong said:
I have the exact same problem.
GT-N8013, rooted, stock rom with root injected.
I called Samsung tech service and they said I should send my device to them.
The only way I can get out of this "update->reboot->update->reboot->..." infinite loop is to get into ODIN mode. (I can't turn off the device)
I decided to re-flash my rom (stock rom with root injected) in ODIN mode, but it does not have any effect and the device is still on this infinite loop. I'm worried if I messed up the device even more by doing that.
Click to expand...
Click to collapse
ytdong said:
Is there any way I can at least access the internal storage somehow and copy my data?
There are some important job application info in S Note..
Click to expand...
Click to collapse
you should've sync your snote data with drive or dropbox!!! any firmware update 101 is to back up all your data
ytdong said:
I have the exact same problem.
GT-N8013, rooted, stock rom with root injected.
I called Samsung tech service and they said I should send my device to them.
The only way I can get out of this "update->reboot->update->reboot->..." infinite loop is to get into ODIN mode. (I can't turn off the device)
I decided to re-flash my rom (stock rom with root injected) in ODIN mode, but it does not have any effect and the device is still on this infinite loop. I'm worried if I messed up the device even more by doing that.
Click to expand...
Click to collapse
Try using Odin to flash the high on android cwm recovery. Once I did that I could restore a backup and boot to android.
Thank you! but I've been on stock recovery so I never flashed cwm or made a cwm backup. How can I restore to a backup after I flash the cwm recovery?
Nefariouss said:
Try using Odin to flash the high on android cwm recovery. Once I did that I could restore a backup and boot to android.
Click to expand...
Click to collapse
if you've never flash CWM, that means you never backed up via CWM, which means you can't restore to a back up. You have to use ODIN and flash a stock firmware on your note to recover it
Yes I'm trying to find a stock firmware for N8013 (UEALGB) but no luck. There is only "root injected" stock firmware, which is causing the problem right now...
Has anyone resolved this problem?
khanh1289 said:
if you've never flash CWM, that means you never backed up via CWM, which means you can't restore to a back up. You have to use ODIN and flash a stock firmware on your note to recover it
Click to expand...
Click to collapse
ytdong said:
Yes I'm trying to find a stock firmware for N8013 (UEALGB) but no luck. There is only "root injected" stock firmware, which is causing the problem right now...
Has anyone resolved this problem?
Click to expand...
Click to collapse
I have a N8013 and was running the stock, root injected firmware (UEALGB). Today I got the update notification. I tried to install and it kept looping. This is what I did:
1. Flashed the stock firmware with ODIN. You'll find the stock firmware here:
http://forum.xda-developers.com/showthread.php?t=1847706
2. When my tab rebooted, I got another update notification. I installed it and it worked. I'm now running UEALI3.
I didn't lose any data. I just lost root.
This worked for me as well. Thanks a lot, Vincent9756!:good:
Vincent9756 said:
I have a N8013 and was running the stock, root injected firmware (UEALGB). Today I got the update notification. I tried to install and it kept looping. This is what I did:
1. Flashed the stock firmware with ODIN. You'll find the stock firmware here:
http://forum.xda-developers.com/showthread.php?t=1847706
2. When my tab rebooted, I got another update notification. I installed it and it worked. I'm now running UEALI3.
I didn't lose any data. I just lost root.
Click to expand...
Click to collapse
Vincent9756 said:
I have a N8013 and was running the stock, root injected firmware (UEALGB). Today I got the update notification. I tried to install and it kept looping. This is what I did:
1. Flashed the stock firmware with ODIN. You'll find the stock firmware here:
http://forum.xda-developers.com/showthread.php?t=1847706
2. When my tab rebooted, I got another update notification. I installed it and it worked. I'm now running UEALI3.
I didn't lose any data. I just lost root.
Click to expand...
Click to collapse
Worked for me. Thanks!
rrhutch said:
Worked for me. Thanks!
Click to expand...
Click to collapse
What if i didn't do Root Injected, but the Second Method of Flashing the Root.zip with CWM? which recovery do i download and flash in odin?
would that work?
Kikoshi said:
What if i didn't do Root Injected, but the Second Method of Flashing the Root.zip with CWM? which recovery do i download and flash in odin?
would that work?
Click to expand...
Click to collapse
Flash the recovery version for your firmware. If you have stock, flash the GB recovery. If you have LH2, flash that.
If you want to save root, use OTA RootKeeper before doing anything.
Z a p i x said:
Flash the recovery version for your firmware. If you have stock, flash the GB recovery. If you have LH2, flash that.
If you want to save root, use OTA RootKeeper before doing anything.
Click to expand...
Click to collapse
Im sorry but what do you mean GB Aaah that was the primary stock recovery before i updated to LH2 lol, now i get it.?The one that i have is the CWM HighonAndroid which was used for the Method 2 to obtain root, so then i jus tdownoad the stock LH2 Recovery, and use OTA rootkeeper before Odin LH2 Stock Recovery right? Will there also be a stock kernel and recovery for UEALI3 ? was thinking of possibly using the Triangle Away after this, possibly might be needed. Though maybe not.
Just want to make sure that everything is normal after this lol
ok... giving it a shot now, and using the OTA RootKeeper, lets see if this works
Everything Got updated !!! OTA seems to have worked which was awesome.
Testing everything to make sure that Root is fully funtional .
Used RootChecker, and things seems fully working!
Thank you loads for the help!
Kikoshi said:
Im sorry but what do you mean GB Aaah that was the primary stock recovery before i updated to LH2 lol, now i get it.?The one that i have is the CWM HighonAndroid which was used for the Method 2 to obtain root, so then i jus tdownoad the stock LH2 Recovery, and use OTA rootkeeper before Odin LH2 Stock Recovery right? Will there also be a stock kernel and recovery for UEALI3 ? was thinking of possibly using the Triangle Away after this, possibly might be needed. Though maybe not.
Just want to make sure that everything is normal after this lol
ok... giving it a shot now, and using the OTA RootKeeper, lets see if this works
Everything Got updated !!! OTA seems to have worked which was awesome.
Testing everything to make sure that Root is fully funtional .
Used RootChecker, and things seems fully working!
Thank you loads for the help!
Click to expand...
Click to collapse
Yeah, there will most certainly be kernel and recovery uploads.
the only issue you might run into is CWM not sticking. If it doesn't reflash CWM in ODIN with reboot unchecked. Then after you flash it, boot into CWM. When you select reboot, it should offer to prevent stock recovery from replacing it.
and you're welcome, glad to help
Guys u might think this is a dumb question but how do i flash stock recovery with odin like were do insert the file i know how tp put in dl mode and get my comp to see my tab in odin and i did flash the prerooted injected stock uealgb recovery to get root i just dont know were to put the files in odin some help would be greatly appreciated, cause i need to flash this first before i do the ota update correct ? If not i will bootloop ? So rootkeeper alows me to keep root acess after ota? Thanks guys
Sent from my GT-N8013 using xda app-developers app / jelly powered samsung infuse 4g
i flashed this and now my phone is stuck on the sprint boot logo and i never made a backup.
ODEXED-NE5-Vol_Nag_Remover.zip
anyway i can fix this?
i was on my stock rom android 4.4.2 with twrp installed
i can still boot to twrp.
can anyone make a flashable of the 4.4.2 framework from stock tw rom please!?
i need to get my stock rom back up and running!
framework.jar & framework.odex
does anyone have these files?
:crying: PLEASE HELP
First things first. Your device is not " BRICKED " . You have several choices here. The two easiest IMO since you did not make a Nandroid Backup are, ODIN back to Stock NE5. Or flash another Rom. Rwilco12's Mostly Stock NE5 is a good choice if you want to stay very close to Stock, but have a few added features.
prboy1969 said:
First things first. Your device is not " BRICKED " . You have several choices here. The two easiest IMO since you did not make a Nandroid Backup are, ODIN back to Stock NE5. Or flash another Rom. Rwilco12's Mostly Stock NE5 is a good choice if you want to stay very close to Stock, but have a few added features.
Click to expand...
Click to collapse
yes i know i could do that but honestly what im trying to do is restore the 2 messed up files on my stock rom so that i may make a working backup of my stock rom before i go flash testing new roms.
i realy just need these files!
framework.jar & framework.odex
jackrabbit72380 said:
yes i know i could do that but honestly what im trying to do is restore the 2 messed up files on my stock rom so that i may make a working backup of my stock rom before i go flash testing new roms.
i realy just need these files!
framework.jar & framework.odex
Click to expand...
Click to collapse
What stock firmware were you on? Download which ever firmware you have on your phone currently, flash through odin. This will get u to same point your at now but not rooted and no bootloop, so after your done flashing stock firmware, root with method you had used before, everything should be the way it was before, now make a nandroid with you recovery.
Iceburn1 said:
What stock firmware were you on? Download which ever firmware you have on your phone currently, flash through odin. This will get u to same point your at now but not rooted and no bootloop, so after your done flashing stock firmware, root with method you had used before, everything should be the way it was before, now make a nandroid with you recovery.
Click to expand...
Click to collapse
well one of the problums im having is i don't know what stock firmwire i was on. nd2 ne5 or mf9 is there anyway to tell?
Firmware
jackrabbit72380 said:
well one of the problums im having is i don't know what stock firmwire i was on. nd2 ne5 or mf9 is there anyway to tell?
Click to expand...
Click to collapse
If you didnt update it should say it on the box that your phone came with.
Iceburn1 said:
If you didnt update it should say it on the box that your phone came with.
Click to expand...
Click to collapse
i thought i updated to the latest firmwire acouple months ago and i thought that was mf9. but i never accepted the ota i did it through xda methods.
anyway i looked on the box i didn't see where it said anything
Iceburn1 said:
What stock firmware were you on? Download which ever firmware you have on your phone currently, flash through odin. This will get u to same point your at now but not rooted and no bootloop, so after your done flashing stock firmware, root with method you had used before, everything should be the way it was before, now make a nandroid with you recovery.
Click to expand...
Click to collapse
I used odin-v3.07 and CF-Auto-Root-kltespr-kltespr-smg900p.zip
but I dont know what firmwire i was on.
Iceburn1 said:
If you didnt update it should say it on the box that your phone came with.
Click to expand...
Click to collapse
Is there anyway to tell in twrp?
Firmware
jackrabbit72380 said:
I used odin-v3.07 and CF-Auto-Root-kltespr-kltespr-smg900p.zip
but I dont know what firmwire i was on.
Is there anyway to tell in twrp?
Click to expand...
Click to collapse
What happens when you make a backup? Usually when you make a nandroid, it names the file with what firmware your on. I know its senseless to make a back up, but at least you can find firmware out.