Related
http://forum.xda-developers.com/showthread.php?t=786266
Download the stock DI18 rom from http://www.sdx-downloads.com/devs/noobnl/stock.epic.DI18.rom.update.zip and move to sdcard
Flashable .zip - You can flash this alternatively Flashable DK28.zip after wiping you phone and flash any DK28 Rom you wish instead of the steps below
Make a nandroid and wipe data/cache 3 times and flash the stock rom and reboot
reboot, go back into clockwork and flash the update.zip for 2.2.1
All you gotta do is flash. I havent tested it myself[in the process] but just wanted to share the info with other who dont trust odin
I take no credit but all goes to noobnl and Firon for the flashable modem
*EDIT*
Confirmed that this method worked..will post a pic later
WHOOOOOOOOOOOOOOOOOOOOOOOOOOO
Zei said:
http://forum.xda-developers.com/showthread.php?t=786266
All you gotta do is flash. I havent tested it myself[in the process] but just wanted to share the info with other who dont trust odin
I take no credit but all goes to noobnl
Click to expand...
Click to collapse
This does work for the ROM itself, if you want to use the OTA. (The modem, probably not.) Good reminder, that thread's buried.
You can also use this if you like.
k0nane said:
This does work, if you want to use the OTA. Good reminder, that thread's buried.
You can also use this if you like.
Click to expand...
Click to collapse
I knew it was a stock DI18 rom out there from the early days of using OTA's to update...just went to the Wiki to find it.
Good looks on you guys ROM
You MUST Odin to DI18 modem to update your modem successfully. Alternatively, use Odin to flash the DK28 modem.
There is no update.zip that can flash you back to DI18 modem!
Firon said:
You MUST Odin to DI18 modem to update your modem successfully. Alternatively, use Odin to flash the DK28 modem.
There is no update.zip that can flash you back to DI18 modem!
Click to expand...
Click to collapse
But didnt you make the updater .zip to return to DI18? I just downloaded your file for it....
*Edit* im on DI18 already but just for the other users who do not wanna brick their phone...using odin for some users have caused brick...I was one of them
My current Baseband version is S700.0.5S.DI18 - so I assume that means I wouldn't need to sue Odin to revert the modem back? I could just apply these .zips and then apply today's OTA afterwards?
Thanks guys!
bagelicious said:
My current Baseband version is S700.0.5S.DI18 - so I assume that means I wouldn't need to sue Odin to revert the modem back? I could just apply these .zips and then apply today's OTA afterwards?
Thanks guys!
Click to expand...
Click to collapse
It works my man
Zei said:
It works my man
Click to expand...
Click to collapse
Thanks for posting this - I'm downloading the stock.epic.DI18.rom.update.zip right now. You guys rock!
Awesome, thanks Zei for this. I was looking for a way to avoid Odin. Three quick questions:
1 - I'm on DI18 (baseband S700.0.5S.DI18), but not quite stock - I have the deodexed DI18 installed, but no custom ROM). Will this method work for me?
2 - In your link for the stock DI18 ROM in the first post, I'm assuming you're talking about downloading the first file in the linked thread (there are 4 downloadable files in the first post in the linked thread)
3 - What's the best way to restore data after this process - I've made many nandroid backups but never had to restore - can I do a custom nandroid restore and restore just user app data? Should I do a Titanium backup/restore for data?
I wouldn't restore data from Eclair to Froyo... likely will lead to endless force closes and errors.
Sent from my SPH-D700 using XDA App
rsage said:
Awesome, thanks Zei for this. I was looking for a way to avoid Odin. Three quick questions:
1 - I'm on DI18 (baseband S700.0.5S.DI18), but not quite stock - I have the deodexed DI18 installed, but no custom ROM). Will this method work for me?
2 - In your link for the stock DI18 ROM in the first post, I'm assuming you're talking about downloading the first file in the linked thread (there are 4 downloadable files in the first post in the linked thread)
3 - What's the best way to restore data after this process - I've made many nandroid backups but never had to restore - can I do a custom nandroid restore and restore just user app data? Should I do a Titanium backup/restore for data?
Click to expand...
Click to collapse
1. Id flash the stock rom for just in case purposes. No need todo any extra work for no reason
2. Yes, the 1st link is the correct link
3. TBH, I wouldnt recommend a nandroid data restore for this. Seeing as this is a brand spanking new rom I wouldnt risk it then have to start the process over again. Titainium Backup is the safest way togo for now
Thanks to all the Devs who worked on this.
DOes anyone know how to access the TV out function? Or if it is available in this release?
I am up and running after using this version. Seems almost too good to be true so far! Thanks again you guys.
I'm still on the di18 modem but a 2.2 early leak..do I have to do anything or can I just flash the roote dk28...I'm so lost in all this atm
imtjnotu said:
I'm still on the di18 modem but a 2.2 early leak..do I have to do anything or can I just flash the roote dk28...I'm so lost in all this atm
Click to expand...
Click to collapse
You need to be on stock DI18 because the OTA will not flash unless it has certain stock apps to recognize
Zei said:
You need to be on stock DI18 because the OTA will not flash unless it has certain stock apps to recognize
Click to expand...
Click to collapse
Can the ota be rooted
imtjnotu said:
Can the ota be rooted
Click to expand...
Click to collapse
yes the current oneclick method works just fine. Make sure you have the phone in debug mode
http://firon.net/xda/stock.dk28.modem.update.signed.zip
For anyone on DI18, you can use this to upgrade your modem to DK28, then flash any ROM you want. This will probably NOT work on other, newer modems, but you can try it!
Firon said:
http://firon.net/xda/stock.dk28.modem.update.signed.zip
For anyone on DI18, you can use this to upgrade your modem to DK28, then flash any ROM you want. This will probably NOT work on other, newer modems, but you can try it!
Click to expand...
Click to collapse
Ill add this to the post
Firon said:
http://firon.net/xda/stock.dk28.modem.update.signed.zip
For anyone on DI18, you can use this to upgrade your modem to DK28, then flash any ROM you want. This will probably NOT work on other, newer modems, but you can try it!
Click to expand...
Click to collapse
Sweet Ill test it right now.....
so my friend called me and said she rooted her phone with odin and she never flashed a custom rom or anything after she just left it stock shes a nooby aha but she is telling me that the OTA auto update went through and since then its been boot looping any help??
Restles said:
so my friend called me and said she rooted her phone with odin and she never flashed a custom rom or anything after she just left it stock shes a nooby aha but she is telling me that the OTA auto update went through and since then its been boot looping any help??
Click to expand...
Click to collapse
If she wants to use OTA, her phone must be pure stock, no root, no custom rom/kernel/right version of modem, no efs file system(must be rfs). She can Odin back to factory stock rom E4D, then re do the OTA.
buhohitr said:
If she wants to use OTA, her phone must be pure stock, no root, no custom rom/kernel/right version of modem, no efs file system(must be rfs). She can Odin back to factory stock rom E4D, then re do the OTA.
Click to expand...
Click to collapse
I believe he meant EP4D, not E4D. That's what I used last night.
Still Charged Up
I received notice this morning that a firmware update was ready to install. I chose to install it and the tablet rebooted and start to apply the update. However, it gets to 32% on the update install, stalls, and then reboots and does the exact same thing.
Any thoughts on a solution?
rrhutch said:
I received notice this morning that a firmware update was ready to install. I chose to install it and the tablet rebooted and start to apply the update. However, it gets to 32% on the update install, stalls, and then reboots and does the exact same thing.
Any thoughts on a solution?
Click to expand...
Click to collapse
i have the same problm :crying:
Need more info than that.
For example... Are you rooted or stock?
If rooted, there are a couple of reasons off hand I can think of you could be having a problem.
If you're stock, well... All I can think of is wave your hands in the air, and wave them like you just don't care. Pretty sure that won't fix the problem though, but if it does, report back! xD
I'm rooted.
Sent from my DROID RAZR using xda app-developers app
exactly the same problem
I have the exact same problem.
GT-N8013, rooted, stock rom with root injected.
I called Samsung tech service and they said I should send my device to them.
The only way I can get out of this "update->reboot->update->reboot->..." infinite loop is to get into ODIN mode. (I can't turn off the device)
I decided to re-flash my rom (stock rom with root injected) in ODIN mode, but it does not have any effect and the device is still on this infinite loop. I'm worried if I messed up the device even more by doing that.
ytdong said:
I have the exact same problem.
GT-N8013, rooted, stock rom with root injected.
I called Samsung tech service and they said I should send my device to them.
The only way I can get out of this "update->reboot->update->reboot->..." infinite loop is to get into ODIN mode. (I can't turn off the device)
I decided to re-flash my rom (stock rom with root injected) in ODIN mode, but it does not have any effect and the device is still on this infinite loop. I'm worried if I messed up the device even more by doing that.
Click to expand...
Click to collapse
I'm in the same situation.
I'm going to try http://forum.xda-developers.com/showthread.php?t=1849994
when I get home tonight to see if this fixes it.
Is there any way I can at least access the internal storage somehow and copy my data?
There are some important job application info in S Note..
ytdong said:
I have the exact same problem.
GT-N8013, rooted, stock rom with root injected.
I called Samsung tech service and they said I should send my device to them.
The only way I can get out of this "update->reboot->update->reboot->..." infinite loop is to get into ODIN mode. (I can't turn off the device)
I decided to re-flash my rom (stock rom with root injected) in ODIN mode, but it does not have any effect and the device is still on this infinite loop. I'm worried if I messed up the device even more by doing that.
Click to expand...
Click to collapse
ytdong said:
Is there any way I can at least access the internal storage somehow and copy my data?
There are some important job application info in S Note..
Click to expand...
Click to collapse
you should've sync your snote data with drive or dropbox!!! any firmware update 101 is to back up all your data
ytdong said:
I have the exact same problem.
GT-N8013, rooted, stock rom with root injected.
I called Samsung tech service and they said I should send my device to them.
The only way I can get out of this "update->reboot->update->reboot->..." infinite loop is to get into ODIN mode. (I can't turn off the device)
I decided to re-flash my rom (stock rom with root injected) in ODIN mode, but it does not have any effect and the device is still on this infinite loop. I'm worried if I messed up the device even more by doing that.
Click to expand...
Click to collapse
Try using Odin to flash the high on android cwm recovery. Once I did that I could restore a backup and boot to android.
Thank you! but I've been on stock recovery so I never flashed cwm or made a cwm backup. How can I restore to a backup after I flash the cwm recovery?
Nefariouss said:
Try using Odin to flash the high on android cwm recovery. Once I did that I could restore a backup and boot to android.
Click to expand...
Click to collapse
if you've never flash CWM, that means you never backed up via CWM, which means you can't restore to a back up. You have to use ODIN and flash a stock firmware on your note to recover it
Yes I'm trying to find a stock firmware for N8013 (UEALGB) but no luck. There is only "root injected" stock firmware, which is causing the problem right now...
Has anyone resolved this problem?
khanh1289 said:
if you've never flash CWM, that means you never backed up via CWM, which means you can't restore to a back up. You have to use ODIN and flash a stock firmware on your note to recover it
Click to expand...
Click to collapse
ytdong said:
Yes I'm trying to find a stock firmware for N8013 (UEALGB) but no luck. There is only "root injected" stock firmware, which is causing the problem right now...
Has anyone resolved this problem?
Click to expand...
Click to collapse
I have a N8013 and was running the stock, root injected firmware (UEALGB). Today I got the update notification. I tried to install and it kept looping. This is what I did:
1. Flashed the stock firmware with ODIN. You'll find the stock firmware here:
http://forum.xda-developers.com/showthread.php?t=1847706
2. When my tab rebooted, I got another update notification. I installed it and it worked. I'm now running UEALI3.
I didn't lose any data. I just lost root.
This worked for me as well. Thanks a lot, Vincent9756!:good:
Vincent9756 said:
I have a N8013 and was running the stock, root injected firmware (UEALGB). Today I got the update notification. I tried to install and it kept looping. This is what I did:
1. Flashed the stock firmware with ODIN. You'll find the stock firmware here:
http://forum.xda-developers.com/showthread.php?t=1847706
2. When my tab rebooted, I got another update notification. I installed it and it worked. I'm now running UEALI3.
I didn't lose any data. I just lost root.
Click to expand...
Click to collapse
Vincent9756 said:
I have a N8013 and was running the stock, root injected firmware (UEALGB). Today I got the update notification. I tried to install and it kept looping. This is what I did:
1. Flashed the stock firmware with ODIN. You'll find the stock firmware here:
http://forum.xda-developers.com/showthread.php?t=1847706
2. When my tab rebooted, I got another update notification. I installed it and it worked. I'm now running UEALI3.
I didn't lose any data. I just lost root.
Click to expand...
Click to collapse
Worked for me. Thanks!
rrhutch said:
Worked for me. Thanks!
Click to expand...
Click to collapse
What if i didn't do Root Injected, but the Second Method of Flashing the Root.zip with CWM? which recovery do i download and flash in odin?
would that work?
Kikoshi said:
What if i didn't do Root Injected, but the Second Method of Flashing the Root.zip with CWM? which recovery do i download and flash in odin?
would that work?
Click to expand...
Click to collapse
Flash the recovery version for your firmware. If you have stock, flash the GB recovery. If you have LH2, flash that.
If you want to save root, use OTA RootKeeper before doing anything.
Z a p i x said:
Flash the recovery version for your firmware. If you have stock, flash the GB recovery. If you have LH2, flash that.
If you want to save root, use OTA RootKeeper before doing anything.
Click to expand...
Click to collapse
Im sorry but what do you mean GB Aaah that was the primary stock recovery before i updated to LH2 lol, now i get it.?The one that i have is the CWM HighonAndroid which was used for the Method 2 to obtain root, so then i jus tdownoad the stock LH2 Recovery, and use OTA rootkeeper before Odin LH2 Stock Recovery right? Will there also be a stock kernel and recovery for UEALI3 ? was thinking of possibly using the Triangle Away after this, possibly might be needed. Though maybe not.
Just want to make sure that everything is normal after this lol
ok... giving it a shot now, and using the OTA RootKeeper, lets see if this works
Everything Got updated !!! OTA seems to have worked which was awesome.
Testing everything to make sure that Root is fully funtional .
Used RootChecker, and things seems fully working!
Thank you loads for the help!
Kikoshi said:
Im sorry but what do you mean GB Aaah that was the primary stock recovery before i updated to LH2 lol, now i get it.?The one that i have is the CWM HighonAndroid which was used for the Method 2 to obtain root, so then i jus tdownoad the stock LH2 Recovery, and use OTA rootkeeper before Odin LH2 Stock Recovery right? Will there also be a stock kernel and recovery for UEALI3 ? was thinking of possibly using the Triangle Away after this, possibly might be needed. Though maybe not.
Just want to make sure that everything is normal after this lol
ok... giving it a shot now, and using the OTA RootKeeper, lets see if this works
Everything Got updated !!! OTA seems to have worked which was awesome.
Testing everything to make sure that Root is fully funtional .
Used RootChecker, and things seems fully working!
Thank you loads for the help!
Click to expand...
Click to collapse
Yeah, there will most certainly be kernel and recovery uploads.
the only issue you might run into is CWM not sticking. If it doesn't reflash CWM in ODIN with reboot unchecked. Then after you flash it, boot into CWM. When you select reboot, it should offer to prevent stock recovery from replacing it.
and you're welcome, glad to help
Guys u might think this is a dumb question but how do i flash stock recovery with odin like were do insert the file i know how tp put in dl mode and get my comp to see my tab in odin and i did flash the prerooted injected stock uealgb recovery to get root i just dont know were to put the files in odin some help would be greatly appreciated, cause i need to flash this first before i do the ota update correct ? If not i will bootloop ? So rootkeeper alows me to keep root acess after ota? Thanks guys
Sent from my GT-N8013 using xda app-developers app / jelly powered samsung infuse 4g
hi,i am using stock rom running 4.0.4,i had it rooted too and now i had two queries
1)Is rom manager compatible with Atrix 2??
im asking this because when i open it, it shows u need to install CWM recovery...but no option in that responds...not even intall cwm (1st option in menu)....so i installed CWM using atrix boot strapper app and now still rom manager is not detecting CWM..please help
2)after installing CWM, i had backup my present stock rom..so if i flash a new rom now will that CWM and back up still exist??(because we will wipe data which will remove everyhting right??)
for suppose if i flash jelly bean rom and if i dont like it...can i restore my previous stock rom without bricking my device??
thanks for u r help
vdpraneeth said:
hi,i am using stock rom running 4.0.4,i had it rooted too and now i had two queries
1)Is rom manager compatible with Atrix 2??
im asking this because when i open it, it shows u need to install CWM recovery...but no option in that responds...not even intall cwm (1st option in menu)....so i installed CWM using atrix boot strapper app and now still rom manager is not detecting CWM..please help
2)after installing CWM, i had backup my present stock rom..so if i flash a new rom now will that CWM and back up still exist??(because we will wipe data which will remove everyhting right??)
for suppose if i flash jelly bean rom and if i dont like it...can i restore my previous stock rom without bricking my device??
thanks for u r help
Click to expand...
Click to collapse
1) Rom manager is not compatible with Atrix 2. I would not use it. Why do you need it anyway??
You can use Atrix Bootstrapper to go into CWM recovery . Rest can be done there. Or you can use Boot Menu Manager.
2)Of course! it will still be there! the backup is saved on your SD Card. So as long as you don't format your SD Card. It will be there.
NHS2008 said:
1) Rom manager is not compatible with Atrix 2. I would not use it. Why do you need it anyway??
You can use Atrix Bootstrapper to go into CWM recovery . Rest can be done there. Or you can use Boot Menu Manager.
2)Of course! it will still be there! the backup is saved on your SD Card. So as long as you don't format your SD Card. It will be there.
Click to expand...
Click to collapse
Rom Manager does work with Atrix2. If you're on Stock ICS, you can install CWM on every boot, then flash the Bionic recovery through Rom Manager. That will allow you to use the 1 touch backup in RM, just hit backup rom and everything does what it's supposed to.
Here is the CWM on every boot for Stock ICS.
NHS2008 said:
1) Rom manager is not compatible with Atrix 2. I would not use it. Why do you need it anyway??
You can use Atrix Bootstrapper to go into CWM recovery . Rest can be done there. Or you can use Boot Menu Manager.
2)Of course! it will still be there! the backup is saved on your SD Card. So as long as you don't format your SD Card. It will be there.
Click to expand...
Click to collapse
2)will the CWM recovery exist after flashing new rom or i need to install it again??
when i restore to stock fom JB, it means downgrading the firmware right??
so will there be a chance of bricking or is it same to restore anytime from any version??
vdpraneeth said:
2)will the CWM recovery exist after flashing new rom or i need to install it again??
when i restore to stock fom JB, it means downgrading the firmware right??
so will there be a chance of bricking or is it same to restore anytime from any version??
Click to expand...
Click to collapse
No, your Recovery will be wiped after you flash a new rom, but you can install it again and restore your ROM.
But when restoring a rom, make sure you ARE ON THE ROM you are restoring.
E.g. If you flash JB and want Stock ICS back with your backup. First flash the Stock ICS from RSD and then restore your backup from CWM on it.
Or Vice-Versa.
@41rw4lk, Thanks for rectifying that. I did not bother with Rom Manager much.
NHS2008 said:
No, your Recovery will be wiped after you flash a new rom, but you can install it again and restore your ROM.
But when restoring a rom, make sure you ARE ON THE ROM you are restoring.
E.g. If you flash JB and want Stock ICS back with your backup. First flash the Stock ICS from RSD and then restore your backup from CWM on it.
Or Vice-Versa.
@41rw4lk, Thanks for rectifying that. I did not bother with Rom Manager much.
Click to expand...
Click to collapse
but downgrading to stock ICS from JB will brick my mobile right??
is there any problem if im not on the rom im restoring??
(im a newbie and i dont know much..even not found these after searching a lot..thats the reason im asking all these)
41rw4lk said:
Rom Manager does work with Atrix2. If you're on Stock ICS, you can install CWM on every boot, then flash the Bionic recovery through Rom Manager. That will allow you to use the 1 touch backup in RM, just hit backup rom and everything does what it's supposed to.
Here is the CWM on every boot for Stock ICS.
Click to expand...
Click to collapse
how is it possible to flash bionic recovery through RM...all the menu options are disabled for me there even after CWM installed through bootstrap
vdpraneeth said:
2)will the CWM recovery exist after flashing new rom or i need to install it again??
when i restore to stock fom JB, it means downgrading the firmware right??
so will there be a chance of bricking or is it same to restore anytime from any version??
Click to expand...
Click to collapse
I don't think any recovery exist after flashing a new rom. We have a locked bootloader, so we can't replace the stock recovery.img, all of our recoveries hijack the boot process to work. CM10 and PA I believe have a built in recovery, and that's about as close as you'll get to having a recovery exist after flashing a rom.
As far as restoring from JB, I believe you can downgrade to ICS, but you'll have to look at the JB thread to be certain. I'm on AT&T so I haven't had an opportunity to try JB (officially). CM10 is based on JB, but for our phone with the locked bootloader, it's more of a pseudo experience and is based on our ICS framework.
As for bricking, there is always a chance to brick, that's part of the mod game, but if you read and pay attention to what you have and what you're doing, you'll be alright.
vdpraneeth said:
but downgrading to stock ICS from JB will brick my mobile right??
is there any problem if im not on the rom im restoring??
(im a newbie and i dont know much..even not found these after searching a lot..thats the reason im asking all these)
Click to expand...
Click to collapse
UNLESS you have AT&T phone you should be just fine with ref lashing the ICS.
YES. there is a big problem if you are not on a ROM you are restoring.
Its like you are trying to comlete your jigsaw puzzle by putting pieces from some another jigsaw puzzle.
vdpraneeth said:
how is it possible to flash bionic recovery through RM...all the menu options are disabled for me there even after CWM installed through bootstrap
Click to expand...
Click to collapse
You need to use the CWM on every boot setup, the Atrix2Bootstrap alone won't do.
41rw4lk said:
You need to use the CWM on every boot setup, the Atrix2Bootstrap alone won't do.
Click to expand...
Click to collapse
yes...my phone is an AT&T version...though im using it with IDEA.....
so if i install CWM on every boot,then rom manager will detect it and work right??
vdpraneeth said:
yes...my phone is an AT&T version...though im using it with IDEA.....
so if i install CWM on every boot,then rom manager will detect it and work right??
Click to expand...
Click to collapse
Yes. I will say though, if you're on an AT&T branded phone with AT&T firmware, do NOT try to flash the new JB FXZ. It doesn't matter who your carrier is, it matters what firmware your phone is using. So, if you're on AT&T then you need to make sure that the things you flash are for AT&T, or else you will brick and that will be then end of that.
41rw4lk said:
Yes. I will say though, if you're on an AT&T branded phone with AT&T firmware, do NOT try to flash the new JB FXZ. It doesn't matter who your carrier is, it matters what firmware your phone is using. So, if you're on AT&T then you need to make sure that the things you flash are for AT&T, or else you will brick and that will be then end of that.
Click to expand...
Click to collapse
thanks a lot...
what are the ROMS avaialble for us???
can i reflash stock ICS from any of those ROMS safely??
thank you
vdpraneeth said:
thanks a lot...
what are the ROMS avaialble for us???
can i reflash stock ICS from any of those ROMS safely??
thank you
Click to expand...
Click to collapse
CM10
PA
Numa
MIUI (had battery issues, but I think they got it all worked out)
there's a few, you'll just have to look. Most of the time, if something is not meant for AT&T, the devs will post in the description that it isn't compatible. If you want stock ICS back at anytime, you can do yourself a favor and make a backup of your stock ICS all setup the way you like it, so you can restore if needed. If all else fails, there is an Official ICS FXZ that will get you back to stock ICS.
41rw4lk said:
CM10
PA
Numa
MIUI (had battery issues, but I think they got it all worked out)
there's a few, you'll just have to look. Most of the time, if something is not meant for AT&T, the devs will post in the description that it isn't compatible. If you want stock ICS back at anytime, you can do yourself a favor and make a backup of your stock ICS all setup the way you like it, so you can restore if needed. If all else fails, there is an Official ICS FXZ that will get you back to stock ICS.
Click to expand...
Click to collapse
my main question is :
will downgrade to ICS cause brick??
how do i create my own backup for stock ICS??
vdpraneeth said:
my main question is :
will downgrade to ICS cause brick??
how do i create my own backup for stock ICS??
Click to expand...
Click to collapse
You're killing me smalls. You're on ICS already, you're not downgrading anything, nor can you downgrade ie. Gingerbread. There is no Official JB for AT&T, so that's not an issue. CM10 is a JB based rom built on an ICS frame, (for our phone at least), and again, you're not downgrading.
To make a back up, boot in to CWM or whatever recovery you're using (not stock), and click backup. You might hit up the noob thread to get an idea of the terminology and basics for our device. Not trying to be rude, but you're running yourself in circles. You got to walk before you can run.
How do you unroot the GS3 and get back to stock unrooted? I am currently just stock rooted. I'm just done with flashing and don't want to worry about something happening to my phone while I'm rooted, and am sick of it not being able to take the VZW update on a daily basis. I understand there is an unroot in the superuser app, is it as simple as clicking that and it will unroot by itself? Is there more I need to do? Thanks for your help!
Bump
Many ways to unroot, you could use SuperSU and select remove root, then uninstall the app then reboot or use universal unroot app from play store.
buhohitr said:
Many ways to unroot, you could use SuperSU and select remove root, then uninstall the app then reboot or use universal unroot app from play store.
Click to expand...
Click to collapse
Thank you. Once you perform either or these methods, can you still root again in the future if you decide to?
I unrooted through SuperSU. Went to install the VZW update and it went into Teamwin Recovery. When it was trying to update the software and running all the checks, etc. I saw "checking for MD5 file...no MD5 file found." What is this and is this what is causing me to not be able to take the update? Am I supposed to still have Teamwin Recovery? How do I get rid of it? Root Checker said I'm unrooted now.
Where do I go from here? Thanks again!
Bump
irl5fan said:
Bump
Click to expand...
Click to collapse
Flash this file:
http://forum.xda-developers.com/showthread.php?t=2795659
With this guide:
http://forum.xda-developers.com/showthread.php?t=2586319
Then you're unrooted and up to date, but you'll erase all of your data. So backup all the pictures and music you want to keep.
Sent from my HTC6525LVW using Tapatalk
BadUsername said:
Flash this file:
http://forum.xda-developers.com/showthread.php?t=2795659
With this guide:
http://forum.xda-developers.com/showthread.php?t=2586319
Then you're unrooted and up to date, but you'll erase all of your data. So backup all the pictures and music you want to keep.
Sent from my HTC6525LVW using Tapatalk
Click to expand...
Click to collapse
None of the links to the files have anything in them. Is there another way? Any other location to find these files?
irl5fan said:
None of the links to the files have anything in them. Is there another way? Any other location to find these files?
Click to expand...
Click to collapse
You're right, try to search for it in Google. I didn't bookmark anything.
Sent from my HTC6525LVW using Tapatalk
irl5fan said:
I unrooted through SuperSU. Went to install the VZW update and it went into Teamwin Recovery. When it was trying to update the software and running all the checks, etc. I saw "checking for MD5 file...no MD5 file found." What is this and is this what is causing me to not be able to take the update? Am I supposed to still have Teamwin Recovery? How do I get rid of it? Root Checker said I'm unrooted now.
Where do I go from here? Thanks again!
Click to expand...
Click to collapse
Dude.... You shouldn't be rooting if you don't know what TWRP is.... LMAO!
You need to flash stock recovery to take the OTA, you should of backed it up when you first flashed TeamWin to the device and it would of been a simple reflash through Flashify and it would of been good.
Now you need to download Odin (A PC flash tool) and reflash through that programme....
Sent From V500
Using XDA App
unroot gs3
LiamAtkins90 said:
Dude.... You shouldn't be rooting if you don't know what TWRP is.... LMAO!
You need to flash stock recovery to take the OTA, you should of backed it up when you first flashed TeamWin to the device and it would of been a simple reflash through Flashify and it would of been good.
Now you need to download Odin (A PC flash tool) and reflash through that programme....
When did I say I didn't know what TWRP is? So if I flash stock recovery will that get me where I want to be...stock unrooted and able to take OTA updates. I never did flash any custom roms or anything while I was rooted.
Click to expand...
Click to collapse
irl5fan said:
When did I say I didn't know what TWRP is? So if I flash stock recovery will that get me where I want to be...stock unrooted and able to take OTA updates. I never did flash any custom roms or anything while I was rooted.
Click to expand...
Click to collapse
Sorry, I realise my reply come of a little arsey, I will explain.
If you take the OTA in stock recovery it will go through, but as soon as you flash a custom recovery you give up the right to an OTA whilst on said recovery,
Instead you either:
1. Flash a custom ROM, and do updates with there ROM team.
2. Wait for stock ROM to come in a flashable zip for Custom Recoverys.
If you have root and stock recovery and take it, sometime it will go through, sometimes it won't.... Like Samsung Knox for example....
Sometimes it will take but as soon as you boot back up you will have no root.
If you OTA in Custom Recovery it will boot to TWRP and most likely abort straight away and bad things will ocure.
Mixed Partitions no ROM etc...
Now back to your question....
Yeah Stock non rooted you can take OTA (but in Samsung's case, they have a flash counter, that keeps track of system mods)
Best bet would be flash through Odin, to out-the-box firmware and take the OTA from there...to avoid any conflicts with the system.
I do apologise for my earlier post mate, write back if you got it upgraded.
LiamAtkins90 said:
Sorry, I realise my reply come of a little arsey, I will explain.
If you take the OTA in stock recovery it will go through, but as soon as you flash a custom recovery you give up the right to an OTA whilst on said recovery,
Instead you either:
1. Flash a custom ROM, and do updates with there ROM team.
2. Wait for stock ROM to come in a flashable zip for Custom Recoverys.
If you have root and stock recovery and take it, sometime it will go through, sometimes it won't.... Like Samsung Knox for example....
Sometimes it will take but as soon as you boot back up you will have no root.
If you OTA in Custom Recovery it will boot to TWRP and most likely abort straight away and bad things will ocure.
Mixed Partitions no ROM etc...
Now back to your question....
Yeah Stock non rooted you can take OTA (but in Samsung's case, they have a flash counter, that keeps track of system mods)
Best bet would be flash through Odin, to out-the-box firmware and take the OTA from there...to avoid any conflicts with the system.
I do apologise for my earlier post mate, write back if you got it upgraded.
Click to expand...
Click to collapse
No problem. This has been a long drawn out process over the past few months, so forgive me for all the questions and details of events. This is where I'm at. When I started the unrooting process, as stated above, used triangle away to reset the counter and then I unrooted through SuperSU. According to root checker apps I am unrooted, but I believe my bootloader is still unlocked. And obviously still have TWRP. Phone Info: SCH-I535, Version 4.1.2, Baseband I535VRBMF1.
Given that info, do I still flash the stock firmware (from here?--->) (http://downloadandroidfiles.org/download-sch-i535-vzw-i535vrbmb1-1360821900-zip/) and then flash stock recovery? Does flashing stock firmware re-lock my bootloader? Thanks for your help.
irl5fan said:
No problem. This has been a long drawn out process over the past few months, so forgive me for all the questions and details of events. This is where I'm at. When I started the unrooting process, as stated above, used triangle away to reset the counter and then I unrooted through SuperSU. According to root checker apps I am unrooted, but I believe my bootloader is still unlocked. And obviously still have TWRP. Phone Info: SCH-I535, Version 4.1.2, Baseband I535VRBMF1.
Given that info, do I still flash the stock firmware (from here?--->) (http://downloadandroidfiles.org/download-sch-i535-vzw-i535vrbmb1-1360821900-zip/) and then flash stock recovery? Does flashing stock firmware re-lock my bootloader? Thanks for your help.
Click to expand...
Click to collapse
So you used Triangle Away to clear the flash counter?
Great, so the only thing you need now is the stock recovery image for your device,
I would say just flash the stock recovery image through Odin, but their is that many models
with different numbers, it would be easier flashing 4.1.2 firmware again through Odin.
In future bud if your gonna be messing with ROMs and Recovery files I recommend this:
Flash recovery with this:
https://play.google.com/store/apps/details?id=com.cgollner.flashify&hl=en_GB
(Backup Stock Recovery 1st)
Backup Stock EVERYTHING, Boot, System, EFS, Data etc in Recovery of choice.
Move backup to computer or cloud storage.
Then all you need to do to go back is triangle away, restore stock backup, restore stock recovery, unroot through SuperSU.
And the OTA should work.
Sent From V500
Using XDA App
LiamAtkins90 said:
So you used Triangle Away to clear the flash counter?
Great, so the only thing you need now is the stock recovery image for your device,
I would say just flash the stock recovery image through Odin, but their is that many models
with different numbers, it would be easier flashing 4.1.2 firmware again through Odin.
In future bud if your gonna be messing with ROMs and Recovery files I recommend this:
Flash recovery with this:
https://play.google.com/store/apps/details?id=com.cgollner.flashify&hl=en_GB
(Backup Stock Recovery 1st)
Backup Stock EVERYTHING, Boot, System, EFS, Data etc in Recovery of choice.
Move backup to computer or cloud storage.
Then all you need to do to go back is triangle away, restore stock backup, restore stock recovery, unroot through SuperSU.
And the OTA should work.
Sent From V500
Using XDA App
Click to expand...
Click to collapse
I just want to clarify before I go ahead and do anything and get myself into a pickle. Are you saying to flash 4.1.2 firmware instead of stock recovery? Or am I still flashing both of them? If so, which order? Does that link I posted look like it is the correct firmware to you? Also, I have an older version of Odin on my computer, does that matter or should I get the newer one first?
irl5fan said:
I just want to clarify before I go ahead and do anything and get myself into a pickle. Are you saying to flash 4.1.2 firmware instead of stock recovery? Or am I still flashing both of them? If so, which order? Does that link I posted look like it is the correct firmware to you? Also, I have an older version of Odin on my computer, does that matter or should I get the newer one first?
Click to expand...
Click to collapse
Stock recovery is in the firmware file mate, when you flash the firmware it flashes the recovery, clears internal SD card (move pictures, videos, music to PC) & Radio, Modem, EFS basically everything on the phone gets flashed to how it is when you buy it from a store. Whats your model number?
And no it shouldn't matter, I've never seen any issues rise with using older Odin Programmes.
Do you have experience using Odin?
If not:
http://forum.xda-developers.com/galaxy-s3/help/guide-odin-flash-guide-t1671969
That guide covers how to use it, where to place the firmware file etc.
Any questions just ask
Sent From V500
Using XDA App
LiamAtkins90 said:
Stock recovery is in the firmware file mate, when you flash the firmware it flashes the recovery, clears internal SD card (move pictures, videos, music to PC) & Radio, Modem, EFS basically everything on the phone gets flashed to how it is when you buy it from a store. Whats your model number?
And no it shouldn't matter, I've never seen any issues rise with using older Odin Programmes.
Do you have experience using Odin?
If not:
http://forum.xda-developers.com/galaxy-s3/help/guide-odin-flash-guide-t1671969
That guide covers how to use it, where to place the firmware file etc.
Any questions just ask
Sent From V500
Using XDA App
Click to expand...
Click to collapse
My model number is SCH-I535. I have used Odin before, but I'll take a look at the guide just to make sure. Thanks for your help!
LiamAtkins90 said:
Stock recovery is in the firmware file mate, when you flash the firmware it flashes the recovery, clears internal SD card (move pictures, videos, music to PC) & Radio, Modem, EFS basically everything on the phone gets flashed to how it is when you buy it from a store. Whats your model number?
And no it shouldn't matter, I've never seen any issues rise with using older Odin Programmes.
Do you have experience using Odin?
If not:
http://forum.xda-developers.com/galaxy-s3/help/guide-odin-flash-guide-t1671969
That guide covers how to use it, where to place the firmware file etc.
Any questions just ask
Sent From V500
Using XDA App
Click to expand...
Click to collapse
I just wanted to say thanks for helping out someone in our forums with the VZW variant, I was going to chime in but I see you had things under control. It's just odd to see so many people in our forums who don't have the version we have
From my Wicked S3 on SOKP
ShapesBlue said:
I just wanted to say thanks for helping out someone in our forums with the VZW variant, I was going to chime in but I see you had things under control. It's just odd to see so many people in our forums who don't have the version we have
From my Wicked S3 on SOKP
Click to expand...
Click to collapse
No problem, glad I can help.
Verizon edition Models tend to get overlooked as oppose to International variants which is a shame, I think both should get equal recognition. Not just Sammy Verizon, most Verizon models and also Google Play Edition Model Phones/Tablets get pushed aside.... Crying shame.
LiamAtkins90 said:
Stock recovery is in the firmware file mate, when you flash the firmware it flashes the recovery, clears internal SD card (move pictures, videos, music to PC) & Radio, Modem, EFS basically everything on the phone gets flashed to how it is when you buy it from a store. Whats your model number?
And no it shouldn't matter, I've never seen any issues rise with using older Odin Programmes.
Do you have experience using Odin?
If not:
http://forum.xda-developers.com/galaxy-s3/help/guide-odin-flash-guide-t1671969
That guide covers how to use it, where to place the firmware file etc.
Any questions just ask
Sent From V500
Using XDA App
Click to expand...
Click to collapse
Everything worked out great, flashed the stock firmware and was able to take the OTA. Thank you so much for your help, it's greatly appreciated!