hardware id missing from driver - Verizon Samsung Galaxy S III

i just rooted and whatnot, everything went without a hitch.......i reboot my phone and my PC states that my hardware ID is missing, yet if i lost my IMEI i shouldn't be receiving service correct? anyone know what's going on?
i've tried alternate ports and tried uninstalling drivers completely and reinstalling them, none of it's worked

How did you root(method)
Sent from my SCH-I535 using xda premium

Hulk0069 said:
How did you root(method)
Sent from my SCH-I535 using xda premium
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1792342 this method, i saved my IMEI and everything, my phone rebooted and i have service, just that annoying error, i was reading about possibly having KIES installed will get rid of that error, so i'm trying that now, should i flash my IMEI over just to make sure that's not the issue?
hmmm, this is odd.......if, while the same error is displaying, i go into where i can change the usb pc settings and swap it from standard MTP over to PTP, it'll find my phone as a camera, then if i switch back to MTP, it'll let me browse thru my phone with no issues......wonder if others are having that issue lol

digitalsynner85 said:
i just rooted and whatnot, everything went without a hitch.......i reboot my phone and my PC states that my hardware ID is missing, yet if i lost my IMEI i shouldn't be receiving service correct? anyone know what's going on?
i've tried alternate ports and tried uninstalling drivers completely and reinstalling them, none of it's worked
Click to expand...
Click to collapse
im pretty sure it had nothing to do with rooting....
im guessing you have a windows pc?
samsung put out a driver update for the computer that caused the error.
only way i found to fix the problem is to do a system restore back a few days before the update.
my update was automatic, im going to see if i can stop that update from happening for now..
ic you can call samsung and make them aware like i did...

what is the actual name of the missing driver? is it the samsung _i535 that is missing? is so, it happened to me, and i just have to manually install it by browsing to the android sdk folder under extra and selected the google usb driver.

What is the proper way of fixing this issue. Mine just started throwing this out too. If I reboot my computer I can usually get it to read my phone, but this is a pain.

Wonder no more, same issue here. Missing Hardware ID after rooting, Bell SGH-I747M Used the root/stock image on XDA.
digitalsynner85 said:
http://forum.xda-developers.com/showthread.php?t=1792342 this method, i saved my IMEI and everything, my phone rebooted and i have service, just that annoying error, i was reading about possibly having KIES installed will get rid of that error, so i'm trying that now, should i flash my IMEI over just to make sure that's not the issue?
hmmm, this is odd.......if, while the same error is displaying, i go into where i can change the usb pc settings and swap it from standard MTP over to PTP, it'll find my phone as a camera, then if i switch back to MTP, it'll let me browse thru my phone with no issues......wonder if others are having that issue lol
Click to expand...
Click to collapse

Same thing happens to me.
Switch to a different USB port. Then keep disconnecting from your PC and switching ports if it still does it. Eventually it will install the drivers and work.
Not a fix at all, but what I do to get it to work.
Sent from my SCH-I535 using Tapatalk 2

anyone ever figure out a solution to this "hardware id is missing" issue?

Un-installing and re-installing the drivers works most of the time. I dunno why it didn't for the OP.

Related

Mount as SD Card

Since I flashed Cyanogen 9 RC1 I cannot connect my phone in SD card mode.
I knew that it is a known bug at CM 9 but I thought that everything would be fine if a flash another rom.
But the failure is still there. I tried different roms, and for me it's still not possible to mount the phone in SD card mode.
The option simply not appears. It is charging without the usual choice to mount as SD card or not.
Can some help, please?
That's not a CM9 RC1 bug. I am running RC1 and it's working fine. Try changing USB ports/Cables and re-installing your drivers on your computer.
063_XOBX said:
That's not a CM9 RC1 bug. I am running RC1 and it's working fine. Try changing USB ports/Cables and re-installing your drivers on your computer.
Click to expand...
Click to collapse
I tried different cables and computer! The battery sign don't changes (but the phone is charging) and the option to mount doesn't appears. Even when I plug my phone into the "normal" charger the sign doesn't change anymore. Normally I don't need any driver to connect the phone as SD card.
If changing roms doesn't fix it then it can't be rom related.
063_XOBX said:
If changing roms doesn't fix it then it can't be rom related.
Click to expand...
Click to collapse
OK, I fully agree, that it is not ROM related. It happens to me after I flashed CM 9. Just thought I read something in the thread about it... Anyway, I still have this issue and don't know what to do.
srichter said:
OK, I fully agree, that it is not ROM related. It happens to me after I flashed CM 9. Just thought I read something in the thread about it... Anyway, I still have this issue and don't know what to do.
Click to expand...
Click to collapse
Did you try installing HTC sync? (I know it's a samsung phone but the HTC sync drivers sometimes can make your computer recognize android phones, it's a weird but well documented fix)
Not yet but I will give it a try
Sent from my Nexus S using xda app-developers app

[Q] HELP! Data but no signal!

So I started today feeling a little creative so I flashed the newest MIUI ROM, there was a data issue that I tried to work out and in the end screwed everything up.
I lost signal but I have data.
I have tried probably 10 ROMs and the same has happened, I am getting a roaming sign, but it shows I have bars (I am connected to a wireless repeater so full service all the time on 3g).
What in the world do I do? I've seriously tried everything. I flashed back to stock through ODIN and nothing still.
PLEASE tell me someone has seen heard this problem... WHAT DO I DO?
Thanks in advance...
Go to settings - about phone - status and tell us if your IMEI is a bunch of zeros or a string of numbers.
Sent from my Nexus 7 using xda premium
It's not I its still the right one, that was something I checked... I considered doing a IMEI restore anyway and maybe that would fix the problem but I still definitely have it there. Thanks
tanpatnode said:
It's not I its still the right one, that was something I checked... I considered doing a IMEI restore anyway and maybe that would fix the problem but I still definitely have it there. Thanks
Click to expand...
Click to collapse
Read the thread and go into Mobile settings and fix the settings. After that you'll be good to go.
Sent from my SCH-I535 using xda app-developers app
How I Fixed It
Hey there. Not sure if your still having this problem, but I ran into the same issue with my new phone after rooting, unlocking bootloader, and flashing MIUI. To fix it, I had to odin to stock (Pre-Jellybean for the Samsung Utility), which I got from here: http://hotfile.com/dl/169363562/8975152/SCH-I535_VZW_I535VRALG1_I535VZWALG1.zip.html%20
Then I ran the Samsung Repair Utility from here: http://forum.xda-developers.com/showthread.php?t=1867442&page=18
The Samsung Repair Utility said my ERI was present and my IMEI was accurate per the back of my phone. Desperate, I ran the "Repair ERI" anyway which made no difference until I followed the OP's directions to dial the code to run the factory reset if the tool didn't work. That seemed to do the trick :victory:
Good Luck.

4.3 and ERI

So tell me how screwed I am.
I had CM10.2 on my phone, then my IMEI changed to "0", and I couldn't receive calls. So I flashed my phone to 4.3.
Next right before I fixed the IMEI issue the ERI changed to "none", and put me in roaming mode.
Well I fixed the IMEI issue, but I am now stuck trying to fix the ERI, it still says roaming and does not pull an IP Address.
Is the ERI possible to be fixed now that I am stuck in 4.3?
I tried RevSkills it says, "subsys efs is locked", then I tried Samsung MEID Repair (but it locks up, I believe because I am using 4.3)
Any help appreciated! I will be heading to the Verizon store here in a few, but I'm sure they are going to say buy a new phone or something.
Well Verizon store was not helpful, they tried a bit and gave up. But reading more, I am starting to think I can revert back to older firmware because I did not OTA.
Does this sound right?
Because several times, with 4.3, I tried using ODIN to go to ICS, Well ODIN failed each time with a SW REV CHECK FAIL : Fused 1 > Binary 0...
[Quoting toeshot from another thread.]
The problem is that once you install the 4.3 update you cannot use Odin to flash a downgrade ROM even an official Samsung ROM. You will need to install a custom recovery then flash a rooted rom,
Click to expand...
Click to collapse
I'm going to keep trying things, because basically this phone is useless right now anyways..if I hardbrick it oh well, it was good while it lasted.
Still working on this...
So where I currently am, installed safestrap and flashed over TW Wicked Sensations. Still couldn't access the "subsys efs" because its using the ML1 modem...
Well I flashed over the modem G1, didn't work, tried G7 also doesn't work because they just take it to the "System software not authorized" screen where I am forced to reboot.
I really don't know now. unless there is a TW somewhere out there that lets me switch modems without it bringing up the "System software not authorized" I am stuck forever roaming.
Thanks Odin for letting me flash 4.3 onto my phone without warning me I could never go back. :good:
Bobbydoo8 said:
Still working on this...
So where I currently am, installed safestrap and flashed over TW Wicked Sensations. Still couldn't access the "subsys efs" because its using the ML1 modem...
Well I flashed over the modem G1, didn't work, tried G7 also doesn't work because they just take it to the "System software not authorized" screen where I am forced to reboot.
I really don't know now. unless there is a TW somewhere out there that lets me switch modems without it bringing up the "System software not authorized" I am stuck forever roaming.
Thanks Odin for letting me flash 4.3 onto my phone without warning me I could never go back. :good:
Click to expand...
Click to collapse
Even flashing the stock 4.3 odin file locks it... There is an odin file with the MF1 BOOT CHAIN so it won't lock it, but its too late. Plug it into the PC and run the install helper to reload the totally stock 4.3, then call verizon and tell them that since the OTA came, your phone is always in roam mode. They should replace it.
Sent from my SCH-I535 using xda app-developers app
Bobbydoo8 said:
I had CM10.2 on my phone, then my IMEI changed to "0", and I couldn't receive calls. So I flashed my phone to 4.3. Next right before I fixed the IMEI issue the ERI changed to "none", and put me in roaming mode. Well I fixed the IMEI issue, but I am now stuck trying to fix the ERI, it still says roaming and does not pull an IP Address.
Click to expand...
Click to collapse
I am in a very similiar boat. I was running 10.1.3 and did the upgrade to 10.2 and my IMEI reset to all zeros. So my question is how did you fix your IMEI issue? I flashed a working backup I took before I upgraded and that did not help. Tried other roms, etc and nothing
Jerniganc said:
I am in a very similiar boat. I was running 10.1.3 and did the upgrade to 10.2 and my IMEI reset to all zeros. So my question is how did you fix your IMEI issue? I flashed a working backup I took before I upgraded and that did not help. Tried other roms, etc and nothing
Click to expand...
Click to collapse
Yea the problem is the IMEI and ERI both exist in the EFS, so that is what you would have had to backup..It can still be fixed though. Couple of links for you here:
Youtube1
Youtube2
Software Required/Procedure
So this is the part I screwed up with after finding those links, I immediately flashed to 4.3 to fix the issue, don't do that. Flash it to like ICS ( anything lower than 4.3 ) and then do the procedure part.
Also you can find your IMEI on the sticker under the battery.
5ft24 said:
Even flashing the stock 4.3 odin file locks it... There is an odin file with the MF1 BOOT CHAIN so it won't lock it, but its too late. Plug it into the PC and run the install helper to reload the totally stock 4.3, then call verizon and tell them that since the OTA came, your phone is always in roam mode. They should replace it.
Sent from my SCH-I535 using xda app-developers app
Click to expand...
Click to collapse
After exhausting all possibilities this seems like what I will have to do, its kind of disappointing because my phone is in excellent condition, I may just sell it on ebay for parts or something.
But can you riddle me this batman, even though its says I am roaming, I'm not right? So can I just use my phone like normal?
Bobbydoo8 said:
Yea the problem is the IMEI and ERI both exist in the EFS, so that is what you would have had to backup..It can still be fixed though. Couple of links for you here:
Youtube1
Youtube2
Software Required/Procedure
So this is the part I screwed up with after finding those links, I immediately flashed to 4.3 to fix the issue, don't do that. Flash it to like ICS ( anything lower than 4.3 ) and then do the procedure part.
Also you can find your IMEI on the sticker under the battery.
Click to expand...
Click to collapse
I have watched these videos but the part that keeps hanging me up are the commands that they have you dial. I put them in and nothing happens. If I hit dial it goes nowhere.
Jerniganc said:
I have watched these videos but the part that keeps hanging me up are the commands that they have you dial. I put them in and nothing happens. If I hit dial it goes nowhere.
Click to expand...
Click to collapse
Same thing was happening to me...when I was in CM10.2. I would try the first command to enable Diagnostic Mode / Qualcomm USB Settings. and it would do nothing. I am fairly sure you have to be on a stock ROM for this to work. Also when you dial the commands, after you hit the last number it will perform the operation, you never have to actually press dial.
I saw people posting a bunch of different numbers to try that would bring up the Qualcomm Settings. But I can't really tell you which one you need because I'm on 4.3 and its a different number. But on 4.3 its called ( Enable DM Mode ). Good Luck! :good:
Bobbydoo8 said:
Same thing was happening to me...when I was in CM10.2. I would try the first command to enable Diagnostic Mode / Qualcomm USB Settings. and it would do nothing. I am fairly sure you have to be on a stock ROM for this to work. Also when you dial the commands, after you hit the last number it will perform the operation, you never have to actually press dial.
I saw people posting a bunch of different numbers to try that would bring up the Qualcomm Settings. But I can't really tell you which one you need because I'm on 4.3 and its a different number. But on 4.3 its called ( Enable DM Mode ). Good Luck! :good:
Click to expand...
Click to collapse
I was able to flash a stock room, use *#0808# gain access to the menu, etc and got my IMEI restored. I have data but am still unable to make/receive calls. Two things I noticed that might be the issue. The IMEI SV is 00 and when I go to Access Point Names that list is blank. I did reset to default but that did not repopulate them.
Jerniganc said:
I was able to flash a stock room, use *#0808# gain access to the menu, etc and got my IMEI restored. I have data but am still unable to make/receive calls. Two things I noticed that might be the issue. The IMEI SV is 00 and when I go to Access Point Names that list is blank. I did reset to default but that did not repopulate them.
Click to expand...
Click to collapse
My IMEI SV is also "00".. but I can still make/receive calls. It sounds like you may have set your IMEI wrong. But I'm not sure, couldn't really help you past this, because I am no expert, like some of the people on here.
Bobbydoo8 said:
My IMEI SV is also "00".. but I can still make/receive calls. It sounds like you may have set your IMEI wrong. But I'm not sure, couldn't really help you past this, because I am no expert, like some of the people on here.
Click to expand...
Click to collapse
What do you show in your APN settings? I noticed at one point before I had my IMEI restored I had a bunch of different choices there... now it is blank.
Only have one APN, says "LTE - Verizon Internet"
Bobbydoo8 said:
Only have one APN, says "LTE - Verizon Internet"
Click to expand...
Click to collapse
I cannot seem to get my APN to save. I have entered it manually to match my wife's S3 but it will not save it. Going to Odin back to stock I guess.
well, i am kind of sad that there isn't a fix for the eri missing. Eff you verizon and samsung for making stuff we enjoy difficult!!

[Q] No sim card error problem note 2 tmobile

Hey guys! This is my first time on the boards and of course, I'm in need of some big help. As of now, as the title states, I currently lack sim card functionality. Unfortunately, I believe this is in many ways is my fault as I was deleting some bloatware off my phone... the three that I deleted was the stock internet explorer, a T-Mobile application (forgot the name) and an app called "talk" all of which came on the phone. Everything was fine up until I restarted the phone. My phone is rooted. My backup failed, so I'm in the process of downloading the stock ROM, will that help? any info is appreciated at this point. Anyone has any idea on how to go about this?
cesarlcase said:
Hey guys! This is my first time on the boards and of course, I'm in need of some big help. As of now, as the title states, I currently lack sim card functionality. Unfortunately, I believe this is in many ways is my fault as I was deleting some bloatware off my phone... the three that I deleted was the stock internet explorer, a T-Mobile application (forgot the name) and an app called "talk" all of which came on the phone. Everything was fine up until I restarted the phone. My phone is rooted. My backup failed, so I'm in the process of downloading the stock ROM, will that help? any info is appreciated at this point.
Click to expand...
Click to collapse
Just connected my phone to a laptop and I'm now missing samung driver/ CDC driver. Fixed those issues, updated to new rom and still to no avail. At this point i've tried everything within my scope of knowledge. Anyone?
cesarlcase said:
Just connected my phone to a laptop and I'm now missing samung driver/ CDC driver. Fixed those issues, updated to new rom and still to no avail. At this point i've tried everything within my scope of knowledge. Anyone?
Click to expand...
Click to collapse
Still need help if anyone can assist

Crash when charging

Hi,
I have my Nexus 5 since early february, rooted it, running stock KK no problem.
I flashed the Android L preview a few days after its release to test it a few weeks.
As I wasn't sastified with this preview and the lack of many my little rooted convenience, a few days I went back to KK 4.4.4 and flashed the ElementalX kernel.
Since then when I plug it into anything (computer or just charger) it generally stays just fine until the screen shuts off -during this time I can use normally- or report a system error saying the UI has crashed. I can't use it anymore and I have to unplug it and reboot it.
After rebooting it loses the wallpaper I had setup, as far as I can see it's the only setting it loses.
As I hadn't had this problem with L, I went back to it. And same problem.
Do you know anything about that ? I searched this forum and the only thing that seemed to be near was this thread, but it doesn't exactly corrolate.
Thank you.
You tried a full fresh factory image of 4.4.4, correct?
Sent from my Nexus 4 using XDA Free mobile app
Correct, I took the file from google server not anything else.
I don't know if this would matter (I honestly don't think i would), but have you tried different USB ports, and ultimately, a different computer?
Sent from my Nexus 4 using XDA Free mobile app
I did try every USB hub my motherboard has.
No, I didn't try another computer but I tried on Windows and on Ubuntu.
How did u flash the FI?
Try Method 2 from this guide: http://forum.xda-developers.com/google-nexus-5/general/tutorial-how-to-flash-factory-image-t2513701
BTW do not restore any Android L stuff
I originally typed all commands, but then I used the Nexus Root Toolkit, yes I was being lazy... And maybe I shouldn't have been, but this software seemed legit good. And then I tried what's described in method one.
I'll try method 2 tonight (it's 8am here).
I didn't "restore" android L" stuff, I wanted to see this preview, after having seen it I went back to KK, as I had problems I hadn't had with the preview I thought I'd just come back to that.
Erelde said:
I originally typed all commands, but then I used the Nexus Root Toolkit, yes I was being lazy... And maybe I shouldn't have been, but this software seemed legit good. And then I tried what's described in method one.
I'll try method 2 tonight (it's 8am here).
I didn't "restore" android L" stuff, I wanted to see this preview, after having seen it I went back to KK, as I had problems I hadn't had with the preview I thought I'd just come back to that.
Click to expand...
Click to collapse
I know it's 8.00 am here Enjoy your cup of coffee!
Its strange that this happens on stock with no modifications at all. Have you tried playing around with the USB settings located in both the storage menu and in developer settings?
Sent from my Nexus 4 using XDA Free mobile app
Well, I successfully reflashed 4.4.4, I have not encountered that annoying bug since.
But, I have one driver related issue, windows insists on installing only the ADB drivers when I plug my N5 in MTP mode (USB debbuging deactivated).
And even after it doesn't detect it when I try to send instructions (works fine though in bootloader mode)...
And the os doesn't see the N5 neither as a MTP devices nor a USB storage device. But I can it in the peripherals list.
i can't find the right key words if this problem has happened before (which I'm sure it has)
Erelde said:
Well, I successfully reflashed 4.4.4, I have not encountered that annoying bug since.
But, I have one driver related issue, windows insists on installing only the ADB drivers when I plug my N5 in MTP mode (USB debbuging deactivated).
And even after it doesn't detect it when I try to send instructions (works fine though in bootloader mode)...
And the os doesn't see the N5 neither as a MTP devices nor a USB storage device. But I can it in the peripherals list.
Click to expand...
Click to collapse
Just out of curiosity, does your Nexus display the right amount of storage for your internal SD card (in the settings menu)?
Kortxero said:
Just out of curiosity, does your Nexus display the right amount of storage for your internal SD card (in the settings menu)?
Click to expand...
Click to collapse
Are you thinking of the bug making some 32Go models appear as 16Go ? As I have the 16Go models, I don't think it could affect me :/
Nope, it's right amount of storage displayed, 12,55Go free, 1Go of apps, 1Go of audio files etc
Erelde said:
Are you thinking of the bug making some 32Go models appear as 16Go ? As I have the 16Go models, I don't think it could affect me :/
Nope, it's right amount of storage displayed, 12,55Go free, 1Go of apps, 1Go of audio files etc
Click to expand...
Click to collapse
Yep, that's what I meant Have you tried installing the Universal Driver?
Kortxero said:
Yep, that's what I meant Have you tried installing the Universal Driver?
Click to expand...
Click to collapse
That's what I had installed months ago ^^
I had it laying around my folder dedicated to Android stuffz (that's the name of the folder yes), I forgot about that...
And now all seems to be working fine again ! Thank you
I don't think I would have remembered it
And thank you to all who helped me

Categories

Resources