Related
kallt_kaffe said:
About RELEASE
This is a custom ROM based on the Japanese Softbank 003Z ROM.
IMPORTANT! Everyone must wipe data/cache when updating to RLS8. Even if you tried RLS7.5 (sorry but I signed some more stuff after RLS7.5 so a wipe is needed)
Downloads
Japanese_Jellyfish_RLS8.zip (for normal Clockwork install) (119.2Mb system) MD5: 3C36CD940E7EBF5DC756C565D7633929
Japanese_Jellyfish_RLS8_image.zip (for repartitioning and install) MD5: B6F214EA40EA7E5D3B02F3D4FDC681F7
Japanese_Jellyfish_RLS8_ahb_overclocked.zip (50% AHB bus overclocking at speeds above 600MHz addon) MD5: DACD6FA2181566372DF9746EF0A7BE52
Japanese_Jellyfish_RLS8_hw_ui.zip (Addon to enable hardware accellerated UI) MD5: 2152941B56D4D8869B75BEDD92924022
Japanese_Jellyfish_RLS8_circle_battery.zip (Addon to enable circle battery indicator) MD5: B543098663F78584D301E9D7FC9321DB
Japanese_Jellyfish_RLS8_deskclock.zip (Addon to replace Alarm Clock with Desk Clock) MD5: FBBEB626B5E06D7EEF2097844C6525FB
Japanese_Jellyfish_RLS8_blueish_kbd.zip (Addon to change orange to blue on G-bread kbd) MD5:27B4C271657B42C0A52B10FDF4611979
Japanese_Jellyfish_RLS8_smartdialer_addon.zip (Restore Smart Dialer and RLS7 version of Contacts) MD5: 6C3EA10C177ADFC8A60926084D2D3C67
Installation
Use Clockwork Recovery 2.5.0.9 or 2.5.1.3 or 2.5.1.8 to install the ROM and addons. Remember to Wipe data/cache when installing the ROM. No wipe, no whine...
It also works to use the RA_Recovery as an alternative to Clockwork.
LCD and/or Apps2SD user may want to try this Clockwork version where I replaced the kernel with my custom kernel so it supports EXT3 and the new displays: http://android.modaco.com/index.php?s=&...t&p=1501261
Changing system partition size to 128Mb and data to 286Mb(FOR ADVANCED USERS ONLY ON THEIR OWN RISK!)
Download the image version of the ROM and extract the "image" folder to the the SD-card.
Power off the phone and when powering on hold Menu and Volume-up
When some green text shows up saying it's installing a bunch of .mbn and .img files you may release the buttons and wait for it to reboot. (NOTE: I tried this on a TFT Blade and no green text was shown, just a black screen but after a while it rebooted and everything had worked like it was supposed to. Not sure if it was a coincidence or if TFT Blades doesn't show the green text)
NOTE! This also installs a bunch of firmware files from the Hungarian 256->512Mb update. It works fine on my OSF but do NOT blame me if it bricks your phone. You do not NEED to change partition sizes to use the "lite" version. It's just for advanced users who want to get more space for apps in /data. If this sounds confusing, then it's not for you.
Don't forget to rename or remove the "image" folder on the SD-card when you are done so that you do not reinstall your phone by mistake later on. Sometimes it enters the "image" install when you try to boot into bootloader mode if the image folder still exists on the card.
Go back to standard partition sizes
Repeat the above but with this "image" folder: http://www.mediafire.com/?xtckadj09b7sxt2 MD5: C8010D841AF463F3CB1FDEDFFAFA3B1E. After this you will have Clockwork Recovery as both boot and recovery image so you'll need to put a ROM on your SD-card and install.
RLS8 - 2011-01-18
Added VoiceSearch as it is not available in Market for some.
Added CIFS support to kernel.
Added a non-renamed Gingerbread keyboard (stolen from a Nexus AOSP build) so it's now called "AndroidKeyboard".
Signed everthing connected to framework-res.apk, Contacts.apk and Mms.apk with AOSP platform certs. This makes life eaiser for themers.
Enabled standard Dialer in Contacts.
Removed SmartDialer.apk.
Updated Mms.apk with the version from the now released Chinese V880 ROM (previously used Mms.apk from leaked V880 ROM).
Disabled AGPS by default. Not sure it makes a difference to turn it on and it seems to provoke some "Connection cannot be made" if enabled.
SmartDialer and RLS7 version of Contacts.apk (without dialer) as an addon.
Blue-ish Gingerbread keyboard as addon (using a selected part of modifications found here.
Updated RA recovery.img in "image" install (TPT) to Sebastian404s latest version.
Post RLS7 fixes (attached)
Facebook sync fixed
RLS7 - 2011-01-13
gps.conf back to pre-RLS6 version
resolv.conf removed (don't think it was used anyway and have only seen it in CM releases)
VPN menus enabled in Settings.
Automatic time setting enabled in Settings.
Signal indicators fixed (using same levels as in ZTE 2.1 ROMs)
Original Alarm clock back (has more options) but can be replaced with Desk Clock through addon if DeskClock is preferred.
Stock Filer app back as it can be good to have a simple file manager in place.
Removed lots of lib connected to the iwnnime (japanese IME) that was removed erlier. (Size of system is now below 120Mb)
Changed HH.MM time display to HH:MM in Danish, Norwegian and Finnish language files.
Added more PPP options in kernel (for VPN).
Circle battery indicator is no longer the default but can be added as an addon.
Added Sebastians RA recovery (with CM colors) to the "image" install as it supports EXT4 and also the addons needs a recovery image.
I'm sorry but it is NOT resigned with test keys as I promised it would be. I'm afraid resigning everything with testkeys can lead to problems when updates to "stock" apps like Gmail and Market arrives. This needs to be investigated further before testsigning the release.
Post RLS6 fixes (attached)
Fixed gps.conf
RIL libs for Saunalahti users to stop it from appearing to be roaming when it's not.
RLS6
Added Gmail back as it seems to missing in Market for some people.
Replaced AlarmClock.apk with DeskClock.apk.
Added resolv.conf with Googles public DNS-servers.
Added Googles SUPL host in gps.conf.
Disabled hardware GUI as eat seems to eat battery (enable with addon if you want it)
Changed wifi scan interval from 15 to 180 seconds (saves battery).
Updated apns-conf.xml with some changes found in CM 6.1.
Enabled EXT4 and PPP in kernel and changed kernel to use LZMA compressed initrd.
Removed the built in Japanese voicemail numbers.
Removed recovery.img from "image" install so that it doesn't overwrite any previously installed recovery images.
Removed the hacked "stock" FM Radio and updated Andorko's version to 0.5.
RLS5
No more bloating, only one super-slimmed version that fits on 128Mb system partition (more info and instructions will come later)
New kernel with overclocking support (Use SetCPU)
Added swap and compcache support.
Compiled and added tun.ko for the new kernel.
Re-added Google Search box.
Replaced MMS app with version from the chinese leaked ROM which supports adding multiple recipients.
Replaced libril-qc-1.so and libcm.so with versions from the Swedish Comviq ROM (previously used versions from the Finnish Saunlahti ROM).
(Saunalahti users should use the attached update so that it doens't look like it's roaming)[/url]
RLS4
Now also works without SIM cards (thanks to MDCFan)
No bootlogo, keeps Splash screen until bootanimation starts. Saves space in ramdisk and splash is rather easy to replace yourself compared to replacing the bootlogo.
Removed Nexus bootanimation and uses the default Android flashing logo.
Added ADW Launcher
Added Emulator ROMs
Added VM Heap tool (and changed VM Heap size back to the default 24Mb as you can now easily change it yourselves)
Turned off Stagefright. Stagefright are a new set of media decoders in 2.2 but they are broken in our release which is why it doubles the Quadrant Scores. It doesn't make the phone faster, just the benchmarks and it's just a illusion.
Changed default wallpaper.
Made a super-slim lite version that fits well within a 128Mb system partition (see "Partition layout change" thread and this post for more info.)
RLS3b
Removed libOmxAacDec.so and libOmxMp3Dec.so as suggested by Flibb to get rid of the random mp3 playing issues.
Put the new Settings.apk and SettingsProvider.apk into the right place so this time Tethering and Assisted GPS controls should be there.
RLS3
(native)Wifi Hotspot
USB tethering (mobile data or Wifi)
Enabled AGPS and the checkbox to control it.
Replaced Home Switcher with Froyo version
Included both working Radio apps (thanks to MDCFan and Andorko
Jellyfish got missing after a tragic misunderstanding at a sushi bar and have been replaced with green android and nexus bootanimation.
Updated Linpack to latest version.
IMPORTANT! The themes likely needs to be updated to support RLS3 or they will disable Wifi hotspot and usb tethering through wifi. Usb tethering over through mobile data should still work though.Frankish! The file that is chaned in framework-res.apk is res/values/arrays.xml. You can propably just get the whole resources.rsc from my framework-res.apk and put it into your framework-res.apk files. Just remeber to NOT use compression on the resources.rsc. Use WinRAR and choose "Store" when you add it.
RLS2
The USIM error on unlocked phones is now gone (thansk to MDCFan)
The Japanese extra call dialogue that some people experienced is gone.
Circle battery indicator
Removed APNDroid as it is obsolete with the new Power control widget.
Updated Titanium Backup
Removed the CKPD-daemon
Added Spare Parts
RLS1
Cleaned ROM from branding, custom contacts, bookmarks etc...
Added most of the extra stuff from Finnish Fillyjonk (Launcher Pro etc...)
Upgraded several Google apps and Market.
Unlocked all languages
Added Gingerbread Keyboard and made it the default IME.
Added Wifi tethering app as this kernel, as opposed to the 2.1 kernel, seems to have the needed netfilter stuff enabled.
Enabled hardware GUI accelleration, stagefright etc...
Known issues
Sometimes when an app request root permissions it just "hangs". Resolved by restarting phone or just kill all tasks with a Task killer.
Some phone companies "borrows" other companies networks and will show as roaming when it didn't with the stock ROM. In this case you need to replace libcm.so and libril-qc-1.so with the versions from your stock 2.1 ROM. Updates attached for Saunalahti and Yesss.
Click to expand...
Click to collapse
from blade.modaco.com
tested on optimus san francisco [TFT]
d/l link?
please add it
Have a look here
Already release 2:
Download
Get it here: Japanese_Jellyfish_RLS2.zip
Lite version: Japanese_Jellyfish_RLS2_lite.zip
50% AHB bus overclocking at 480 & 600MHz addon: Japanese_Jellyfish_RLS2_ahb_overclocked.zip
Click to expand...
Click to collapse
Loc-Deu said:
d/l link?
please add it
Click to expand...
Click to collapse
sorry
added
I found this thread in modaco with themes for this rom if someone like to use
http://android.modaco.com/content/zte-blade-blade-modaco-com/327826/themes-for-japjelly-and-sebs-froyos-new-revo-theme/
i flashed the RLS2... works fine for me
I've installed "Extended Controls" and if you install a USB Tether "switch" on one of your homescreens and connect your Blade to your windows pc with a USB cable and press the switch, USB tethering DOES work with this ROM. (make sure data = ON)
joooker16 said:
I've installed "Extended Controls" and if you install a USB Tether "switch" on one of your homescreens and connect your Blade to your windows pc with a USB cable and press the switch, USB tethering DOES work with this ROM. (make sure data = ON)
Click to expand...
Click to collapse
I can confirm this. Works a charm with linux (Wifi Tether just throws an unspecific error tho)
joooker16 said:
I've installed "Extended Controls" and if you install a USB Tether "switch" on one of your homescreens and connect your Blade to your windows pc with a USB cable and press the switch, USB tethering DOES work with this ROM. (make sure data = ON)
Click to expand...
Click to collapse
What is "Extended Controls"? I'm now trying to setup native USB tethering on Modaco Paul's last 2.2 ROM and have no succes.
With this new ROM on what system your USB tethering works? I have Windows XP only at this moment, could it work on it?
TwistBomber said:
What is "Extended Controls"? I'm now trying to setup native USB tethering on Modaco Paul's last 2.2 ROM and have no succes.
With this new ROM on what system your USB tethering works? I have Windows XP only at this moment, could it work on it?
Click to expand...
Click to collapse
extended controls is a extended power control widgets
see herehttp://www.appbrain.com/app/extended-controls/com.extendedcontrols
Blade with 5MPx
Will there be support for the Blade with 5MPs camera? (aka Sapo A5)
eucurto said:
Will there be support for the Blade with 5MPs camera? (aka Sapo A5)
Click to expand...
Click to collapse
only if zte release the kernel for that device
until now we only have the kernel for the 3.2mp's camera
Confirmed 3G - USB tethering
3G tethering works in 3b release. Also standard "Modem" menu returned on its place in Settings. And great newest app for Radio already included in 3beta firmware. I think it's the best firmware now for Blade.
Occasional screen freeze
Hi there Mannas,
I got a ZTE blade for christmas and I put this rom on it and it is very good. I however am seeing the occasional screen freeze where, when I wake the phone up cannot use the screen. Now the buttons still work and I can press the power button and it responds giving the options but I cannot press any of them.
I am running this rom with SetCPU and Advanced Task Manager which I shall switch off to see if it makes a difference.
Any thoughts on how to capture this issue would be appreciated as its a good phone.. just a little frustrated why the screen input disapears occasionally forcing a reset with the battery.
adelamare said:
Hi there Mannas,
I got a ZTE blade for christmas and I put this rom on it and it is very good. I however am seeing the occasional screen freeze where, when I wake the phone up cannot use the screen. Now the buttons still work and I can press the power button and it responds giving the options but I cannot press any of them.
I am running this rom with SetCPU and Advanced Task Manager which I shall switch off to see if it makes a difference.
Any thoughts on how to capture this issue would be appreciated as its a good phone.. just a little frustrated why the screen input disapears occasionally forcing a reset with the battery.
Click to expand...
Click to collapse
I don't know what is happening with your phone. you should ask that question the original thread on modaco here is the link http://android.modaco.com/content/zte-blade-blade-modaco-com/327579/rom-froyo-japanese-jellyfish-rls3b-2011-01-01-oled-tft/
R4 is live
http://android.modaco.com/content/z...-japanese-jellyfish-rls4-2011-01-03-oled-tft/
tested on sapo a5 (portuguese provider)
only camera don´t work.
increase battery, and more fast than stock rom.
João
Update the main-post dude, Japanese Jellyfish is now version 6..
Japanese Jellyfish RLS7 [2011-01-13] [OLED+TFT], Facebook sync fix attached!
Downloads
* Japanese_Jellyfish_RLS7.zip (for normal Clockwork install) (115.7Mb system) MD5: 933CC50FF749D0CA2A5BBF611AB57B19
* Japanese_Jellyfish_RLS7_image.zip (for repartitioning and install) MD5: AD7423E804A16EA35394A4B912A6509B
* Japanese_Jellyfish_RLS7_ahb_overclocked.zip (50% AHB bus overclocking at speeds above 600MHz addon) MD5: 13229B3AC34C1917F1A0ECC4B82B4723
* Japanese_Jellyfish_RLS7_hw_ui.zip (Addon to enable hardware accellerated UI) MD5: F422A55C0322B02F1D6F106A31094A66
* Japanese_Jellyfish_RLS7_circle_battery.zip (Addon to enable circle battery indicator) MD5: A6D60415CE99757C61E8C02C4FA8AF7F
* Japanese_Jellyfish_RLS7_deskclock.zip (Addon to replace Alarm Clock with Desk Clock) MD5: FBBEB626B5E06D7EEF2097844C6525FB
Changing system partition size to 128Mb and data to 286Mb(FOR ADVANCED USERS ONLY ON THEIR OWN RISK!)
* Download the image version of the ROM and extract the "image" folder to the the SD-card.
* Power off the phone and when powering on hold Menu and Volume-up
* When some green text shows up saying it's installing a bunch of .mbn and .img files you may release the buttons and wait for it to reboot. (NOTE: I tried this on a TFT Blade and no green text was shown, just a black screen but after a while it rebooted and everything had worked like it was supposed to. Not sure if it was a coincidence or if TFT Blades doesn't show the green text)
NOTE! This also installs a bunch of firmware files from the Hungarian 256->512Mb update. It works fine on my OSF but do NOT blame me if it bricks your phone. You do not NEED to change partition sizes to use the "lite" version. It's just for advanced users who want to get more space for apps in /data. If this sounds confusing, then it's not for you.
Don't forget to rename or remove the "image" folder on the SD-card when you are done so that you do not reinstall your phone by mistake later on. Sometimes it enters the "image" install when you try to boot into bootloader mode if the image folder still exists on the card.
Go back to standard partition sizes
Repeat the above but with this "image" folder: http://www.mediafire.com/?xtckadj09b7sxt2 MD5: C8010D841AF463F3CB1FDEDFFAFA3B1E. After this you will have Clockwork Recovery as both boot and recovery image so you'll need to put a ROM on your SD-card and install.
Post RLS7 fixes (attached)
* Facebook sync fixed
RLS7 - 2011-01-13
* gps.conf back to pre-RLS6 version
* resolv.conf removed (don't think it was used anyway and have only seen it in CM releases)
* VPN menus enabled in Settings.
* Automatic time setting enabled in Settings.
* Signal indicators fixed (using same levels as in ZTE 2.1 ROMs)
* Original Alarm clock back (has more options) but can be replaced with Desk Clock through addon if DeskClock is preferred.
* Stock Filer app back as it can be good to have a simple file manager in place.
* Removed lots of lib connected to the iwnnime (japanese IME) that was removed erlier. (Size of system is now below 120Mb)
* Changed HH.MM time display to HH:MM in Danish, Norwegian and Finnish language files.
* Added more PPP options in kernel (for VPN).
* Circle battery indicator is no longer the default but can be added as an addon.
* Added Sebastians RA recovery (with CM colors) to the "image" install as it supports EXT4 and also the addons needs a recovery image.
* I'm sorry but it is NOT resigned with test keys as I promised it would be. I'm afraid resigning everything with testkeys can lead to problems when updates to "stock" apps like Gmail and Market arrives. This needs to be investigated further before testsigning the release.
Which kernel version is in RLS7?
I really love my custom rom (Eternal Prophecy v5.9) but the developer changed the stock froyo keyboard to a custom keyboard (gingerbread style). Does anyone know how to get the stock keyboard (froyo style) back on custom roms that have custom keyboards? Thanks!
Extract the keyboard apk from the stock rom's zip file..should be able to find that somewhere on your phones development thread, and use win7zip to delete the keyboard in your new zip file and replace it with the stock. Reflash the ROM (no need to wipe) and good to go.
Hey guys,
I kinda like the original ICS sounds more than AOKP/CM9 ones, especially the UI clicks. Most of them are identical, but the camera and the UI click were driving me nuts. So (as I usually do) I created two CWM zips that flash either the AOKP/CM9 sound pack or the original AOSP/ICS sound pack.
The current packages are compatible with both AOKP, sgt7 (Te4m) and CM9 (Te4m) builds. In fact, they should also work with any and all subsequent versions as well, but who knows.
Notes & Observations
- Only compatible with ICS (Android 4.0.3 and 4.0.4)
- Only compatible with Recovery 3.0.x or later (should not be a problem with recent/modern ROMs/builds)
- Should be compatible with other devices as well!
However, if you indeed get into trouble, try clearing cache, dalvik cache and flashing your original ROM on top of this package. No data wipe should be required!
Download & Install:
Download OP post attachment of your choice (or all)
Save zips onto your Tab
Reboot in Recovery mode
Install zip from SD Card
Reboot tab
Enjoy
Disclaimer
I will not offer support to anyone in case these ZIPs cause any harm or damage in any way. You are responsible of your own actions including flashing anything to your device!
Thanks and Credits
Thanks, in no particular order to these guys:
Google and Android in general
Team hacksung
The SGT7 ICS Te4m
The CM9 team
The AOKP team
Let me know of any issues in the thread.
Peace,
C.
Does this include the ringtones and notification sounds too? I'm using AOKP b34 on my GNex and wanthem to use them.
Yes, both packages include all sounds including UI, Ringtones, Notifications and Alarms.
They contain the full audio pack of each ROM, extracted for use in a portable way.
Hi, would this work on sgs2 with cm9? Thanks.
Yes, it should work ok on SGS2.
I have stock Gingerbread Rom v20h in my P500 and I want to add the power menu with reboot and recovery option. I have searched on forum and didnt find a flashable .zip, just stock rom with menu included.
Where from can I download a .zip file including this powermenu or is there any tutorial to create such menu?
It involves modifying the framework-res.apk and adding some code, which I doubt you are up to do, so the only option for you is to flash a custom CM7 rom with an already modded power menu.
anthonycr said:
It involves modifying the framework-res.apk and adding some code, which I doubt you are up to do, so the only option for you is to flash a custom CM7 rom with an already modded power menu.
Click to expand...
Click to collapse
I know this, but have no idea about what I have to modify. Just give me a link and then Ill do it myself.
You could try flashing any theme with power menu like this one by vikasb32
[Theme][June-05]Normal ICS+Complete Black ICS For Stock Rom+[ICS Setting][Power Menu]
Remember that it requires a deodexed rom.....
if you want the tutorial you can try this:
How to create powermenu on LGP500
Though i am not sure if its for froyo or gb......
Power Menu!
gargujjwal said:
You could try flashing any theme with power menu like this one by vikasb32
[Theme][June-05]Normal ICS+Complete Black ICS For Stock Rom+[ICS Setting][Power Menu]
Remember that it requires a deodexed rom.....
if you want the tutorial you can try this:
How to create powermenu on LGP500
Though i am not sure if its for froyo or gb......
Click to expand...
Click to collapse
Hi there!
First of all if you want the best "Stock Rom" just Flash this one!
Please remember to wipe everything first in Recovery Mode.
After that go to post #241 on page 25 and Flash the Power Menu available there!
Im my opinion, then, just do the EXT2 partition, install Link2SD and you can install all the google apps in to the SD Card along with any other apps making a clean, light and fast Optimus One.
That's what I did to mine and it runs just great without any issues!
Cheers!
Your Rom isnt deodexed, isnt it?
Check if you have .odex files in system/apps
If thats the case u cant do anything other than flashing a custom stock based rom
Get it ?
The regular version 6 is for Team EOS 4.2 base.
****Version 6.1 (for KatKiss 4.3) fixes the following, lockscreen lock handle, battery color in quicksettings, removes battery text, fixed color of home back and recent apps buttons, fixes color of labels on quicksettings tiles, fixes icons for expanded desktop in power menu, fixed the brightness icon so it's bright blue and removed the sloppiness.
****Version 6.2 (for KatKiss 4.3) includes v6.1 and add's fixes for TABLET mode. (removed v6.1 because it's included in 6.2)
- icon colors fixed.
- text colors fixed
- battery text removed (not needed due to percentage circle indicator)
- only thing that needs to be tweaked now is the color of the on switches, if i can find it.
****Version 6.3 (for KatKiss 4.3) fixes 1% INCREMENTS AND BATTERY ANIMATION (I had forgot to rewrite the xmls for them) so they were only updating every 15% like the original UI, except with the new files. all is fixed now it's updating every percent.
- (version 6.2 removed as 6.3 is just the same thing with battery indicator fixed.)
Now verified working with TEOS build 120, katkiss 4.3 build 20. (the regular v6 is for Team EOS 4.2 roms)
the version for TEOS should be almost done in phablet mode, not sure about tablet mode make requests for me to fix anything i missed.
the version for katkiss 4.3 build 20 is now finished, and should work with other builds but make a backup just in case
It is safe to test on any rom using the following procedure.
- download the flashable zip
- make a copy of the flashable zip and name the copy ORIGINALUI.zip
- open ORIGINALUI.zip with 7-zip or winrar and replace /system/app/SystemUI.apk and /system/framework/framework-res.apk with the CURRENT files from your phone. This will allow you to boot back into recovery and reflash the original files if there is any problems.
It's also recommended you do a nandroid backup before flashing anything just as a safeguard.
Standard warnings (you are responsible for damage done to your phone)
Install instructions
- make a backup flashable zip with your original UI and make a nandroid backup (optional but recommended)
- boot into recovery and flash the zip
- reboot and enjoy
This mod has the following features.
- circle percentage battery indicator, with charging animation.
- standard text changed to #ff2686ff
- holo_blue changed to #ff2686ff
- lockscreen animations color's updated.
- most system icons updated (if i have missed something that you use it's because i don't use it, drop a message if i missed something you want changed and i'll add a new version.) (only applies to SystemUI.apk and framework-res.apk)
- Changed color of most icons in the status bar except some notification icons that are controlled by other apks. (playstore etc) if you need something else changed from SystemUI or framework that i missed just drop a message here.
- over 300 icon changes and 15 modded xml's
- Recommended black or dark color for lockscreen background.
- so far only the swipe lockscreen is done but if you request another one I can try to do it when time permits.
- there is a tutorial on the process I used here
- if you want the specific aapt.exe and the apktool version that works with 4.2 EOS/Katkiss roms just shout at me, i'll post them for you. (alot of them don't work and you'll get compile errors without even changing anything)
The lockscreen clock i'm using is https://play.google.com/store/apps/details?id=sk.michalec.SimpleDigiClockWidget&hl=en
it's far easier to use this then mod the system clock, and ontop of that there is way more fonts and stuff you can use and change the sizes of the date/time etc, it's just way better than modding the built in one.
also using apex launcher i find it's best and most customization.
**************** In the 2 screenshots where the CLOCK IS WHITE it's because I DIDN"T INSTALL DIGICLOCK, it's the stock one and i was only testing the mod so i didnt bother installing digiclock and fix it, the screenshots are to show the fixed tablet mode.
AAAAAAAAAAAAAAAAWEEEEEEEEEEESOMEEEEEEEEEEEEE!
testing now in kat 4.3 ( lastest was 22? or 21?)
I will edit this comemnt for results
Edit:
i think all 4.3 version doesnnt work.
Ah wel i will test the 4.2 build
Is there a way to return to stock after flashing it ?
*Detection* said:
Is there a way to return to stock after flashing it ?
Click to expand...
Click to collapse
He explains it in the first post.
*Detection* said:
Is there a way to return to stock after flashing it ?
Click to expand...
Click to collapse
read the post u just put ur original systemui and framework-res back basically u can copy the flashable and replace the files to do it in recovery
my bad didn't realize someone already responded and told u that
vietchinh said:
AAAAAAAAAAAAAAAAWEEEEEEEEEEESOMEEEEEEEEEEEEE!
testing now in kat 4.3 ( lastest was 22? or 21?)
I will edit this comemnt for results
Click to expand...
Click to collapse
thanks for helping test
has anyone tried it on katkiss 4.2 yet?
if someone has a dock can you let me know if the dock battery indicator is working in 1% increments etc? I don't have a dock.
vietchinh said:
AAAAAAAAAAAAAAAAWEEEEEEEEEEESOMEEEEEEEEEEEEE!
testing now in kat 4.3 ( lastest was 22? or 21?)
I will edit this comemnt for results
Edit:
i think all 4.3 version doesnnt work.
Ah wel i will test the 4.2 build
Click to expand...
Click to collapse
EDIT -- >> 4.3 version now uploaded, Phablet mode done in mod version 6.1, Tablet mode still a work in progress. edit tablet mode now done
if the original version built from TEAM EOS rom doesn't work on kat 4.2 can you try flashing the 4.3 version and see if that works? if not I guess i'll make a 3rd version.
I'm looking into fixing the menu highlighters transparency