kallt_kaffe said:
About RELEASE
This is a custom ROM based on the Japanese Softbank 003Z ROM.
IMPORTANT! Everyone must wipe data/cache when updating to RLS8. Even if you tried RLS7.5 (sorry but I signed some more stuff after RLS7.5 so a wipe is needed)
Downloads
Japanese_Jellyfish_RLS8.zip (for normal Clockwork install) (119.2Mb system) MD5: 3C36CD940E7EBF5DC756C565D7633929
Japanese_Jellyfish_RLS8_image.zip (for repartitioning and install) MD5: B6F214EA40EA7E5D3B02F3D4FDC681F7
Japanese_Jellyfish_RLS8_ahb_overclocked.zip (50% AHB bus overclocking at speeds above 600MHz addon) MD5: DACD6FA2181566372DF9746EF0A7BE52
Japanese_Jellyfish_RLS8_hw_ui.zip (Addon to enable hardware accellerated UI) MD5: 2152941B56D4D8869B75BEDD92924022
Japanese_Jellyfish_RLS8_circle_battery.zip (Addon to enable circle battery indicator) MD5: B543098663F78584D301E9D7FC9321DB
Japanese_Jellyfish_RLS8_deskclock.zip (Addon to replace Alarm Clock with Desk Clock) MD5: FBBEB626B5E06D7EEF2097844C6525FB
Japanese_Jellyfish_RLS8_blueish_kbd.zip (Addon to change orange to blue on G-bread kbd) MD5:27B4C271657B42C0A52B10FDF4611979
Japanese_Jellyfish_RLS8_smartdialer_addon.zip (Restore Smart Dialer and RLS7 version of Contacts) MD5: 6C3EA10C177ADFC8A60926084D2D3C67
Installation
Use Clockwork Recovery 2.5.0.9 or 2.5.1.3 or 2.5.1.8 to install the ROM and addons. Remember to Wipe data/cache when installing the ROM. No wipe, no whine...
It also works to use the RA_Recovery as an alternative to Clockwork.
LCD and/or Apps2SD user may want to try this Clockwork version where I replaced the kernel with my custom kernel so it supports EXT3 and the new displays: http://android.modaco.com/index.php?s=&...t&p=1501261
Changing system partition size to 128Mb and data to 286Mb(FOR ADVANCED USERS ONLY ON THEIR OWN RISK!)
Download the image version of the ROM and extract the "image" folder to the the SD-card.
Power off the phone and when powering on hold Menu and Volume-up
When some green text shows up saying it's installing a bunch of .mbn and .img files you may release the buttons and wait for it to reboot. (NOTE: I tried this on a TFT Blade and no green text was shown, just a black screen but after a while it rebooted and everything had worked like it was supposed to. Not sure if it was a coincidence or if TFT Blades doesn't show the green text)
NOTE! This also installs a bunch of firmware files from the Hungarian 256->512Mb update. It works fine on my OSF but do NOT blame me if it bricks your phone. You do not NEED to change partition sizes to use the "lite" version. It's just for advanced users who want to get more space for apps in /data. If this sounds confusing, then it's not for you.
Don't forget to rename or remove the "image" folder on the SD-card when you are done so that you do not reinstall your phone by mistake later on. Sometimes it enters the "image" install when you try to boot into bootloader mode if the image folder still exists on the card.
Go back to standard partition sizes
Repeat the above but with this "image" folder: http://www.mediafire.com/?xtckadj09b7sxt2 MD5: C8010D841AF463F3CB1FDEDFFAFA3B1E. After this you will have Clockwork Recovery as both boot and recovery image so you'll need to put a ROM on your SD-card and install.
RLS8 - 2011-01-18
Added VoiceSearch as it is not available in Market for some.
Added CIFS support to kernel.
Added a non-renamed Gingerbread keyboard (stolen from a Nexus AOSP build) so it's now called "AndroidKeyboard".
Signed everthing connected to framework-res.apk, Contacts.apk and Mms.apk with AOSP platform certs. This makes life eaiser for themers.
Enabled standard Dialer in Contacts.
Removed SmartDialer.apk.
Updated Mms.apk with the version from the now released Chinese V880 ROM (previously used Mms.apk from leaked V880 ROM).
Disabled AGPS by default. Not sure it makes a difference to turn it on and it seems to provoke some "Connection cannot be made" if enabled.
SmartDialer and RLS7 version of Contacts.apk (without dialer) as an addon.
Blue-ish Gingerbread keyboard as addon (using a selected part of modifications found here.
Updated RA recovery.img in "image" install (TPT) to Sebastian404s latest version.
Post RLS7 fixes (attached)
Facebook sync fixed
RLS7 - 2011-01-13
gps.conf back to pre-RLS6 version
resolv.conf removed (don't think it was used anyway and have only seen it in CM releases)
VPN menus enabled in Settings.
Automatic time setting enabled in Settings.
Signal indicators fixed (using same levels as in ZTE 2.1 ROMs)
Original Alarm clock back (has more options) but can be replaced with Desk Clock through addon if DeskClock is preferred.
Stock Filer app back as it can be good to have a simple file manager in place.
Removed lots of lib connected to the iwnnime (japanese IME) that was removed erlier. (Size of system is now below 120Mb)
Changed HH.MM time display to HH:MM in Danish, Norwegian and Finnish language files.
Added more PPP options in kernel (for VPN).
Circle battery indicator is no longer the default but can be added as an addon.
Added Sebastians RA recovery (with CM colors) to the "image" install as it supports EXT4 and also the addons needs a recovery image.
I'm sorry but it is NOT resigned with test keys as I promised it would be. I'm afraid resigning everything with testkeys can lead to problems when updates to "stock" apps like Gmail and Market arrives. This needs to be investigated further before testsigning the release.
Post RLS6 fixes (attached)
Fixed gps.conf
RIL libs for Saunalahti users to stop it from appearing to be roaming when it's not.
RLS6
Added Gmail back as it seems to missing in Market for some people.
Replaced AlarmClock.apk with DeskClock.apk.
Added resolv.conf with Googles public DNS-servers.
Added Googles SUPL host in gps.conf.
Disabled hardware GUI as eat seems to eat battery (enable with addon if you want it)
Changed wifi scan interval from 15 to 180 seconds (saves battery).
Updated apns-conf.xml with some changes found in CM 6.1.
Enabled EXT4 and PPP in kernel and changed kernel to use LZMA compressed initrd.
Removed the built in Japanese voicemail numbers.
Removed recovery.img from "image" install so that it doesn't overwrite any previously installed recovery images.
Removed the hacked "stock" FM Radio and updated Andorko's version to 0.5.
RLS5
No more bloating, only one super-slimmed version that fits on 128Mb system partition (more info and instructions will come later)
New kernel with overclocking support (Use SetCPU)
Added swap and compcache support.
Compiled and added tun.ko for the new kernel.
Re-added Google Search box.
Replaced MMS app with version from the chinese leaked ROM which supports adding multiple recipients.
Replaced libril-qc-1.so and libcm.so with versions from the Swedish Comviq ROM (previously used versions from the Finnish Saunlahti ROM).
(Saunalahti users should use the attached update so that it doens't look like it's roaming)[/url]
RLS4
Now also works without SIM cards (thanks to MDCFan)
No bootlogo, keeps Splash screen until bootanimation starts. Saves space in ramdisk and splash is rather easy to replace yourself compared to replacing the bootlogo.
Removed Nexus bootanimation and uses the default Android flashing logo.
Added ADW Launcher
Added Emulator ROMs
Added VM Heap tool (and changed VM Heap size back to the default 24Mb as you can now easily change it yourselves)
Turned off Stagefright. Stagefright are a new set of media decoders in 2.2 but they are broken in our release which is why it doubles the Quadrant Scores. It doesn't make the phone faster, just the benchmarks and it's just a illusion.
Changed default wallpaper.
Made a super-slim lite version that fits well within a 128Mb system partition (see "Partition layout change" thread and this post for more info.)
RLS3b
Removed libOmxAacDec.so and libOmxMp3Dec.so as suggested by Flibb to get rid of the random mp3 playing issues.
Put the new Settings.apk and SettingsProvider.apk into the right place so this time Tethering and Assisted GPS controls should be there.
RLS3
(native)Wifi Hotspot
USB tethering (mobile data or Wifi)
Enabled AGPS and the checkbox to control it.
Replaced Home Switcher with Froyo version
Included both working Radio apps (thanks to MDCFan and Andorko
Jellyfish got missing after a tragic misunderstanding at a sushi bar and have been replaced with green android and nexus bootanimation.
Updated Linpack to latest version.
IMPORTANT! The themes likely needs to be updated to support RLS3 or they will disable Wifi hotspot and usb tethering through wifi. Usb tethering over through mobile data should still work though.Frankish! The file that is chaned in framework-res.apk is res/values/arrays.xml. You can propably just get the whole resources.rsc from my framework-res.apk and put it into your framework-res.apk files. Just remeber to NOT use compression on the resources.rsc. Use WinRAR and choose "Store" when you add it.
RLS2
The USIM error on unlocked phones is now gone (thansk to MDCFan)
The Japanese extra call dialogue that some people experienced is gone.
Circle battery indicator
Removed APNDroid as it is obsolete with the new Power control widget.
Updated Titanium Backup
Removed the CKPD-daemon
Added Spare Parts
RLS1
Cleaned ROM from branding, custom contacts, bookmarks etc...
Added most of the extra stuff from Finnish Fillyjonk (Launcher Pro etc...)
Upgraded several Google apps and Market.
Unlocked all languages
Added Gingerbread Keyboard and made it the default IME.
Added Wifi tethering app as this kernel, as opposed to the 2.1 kernel, seems to have the needed netfilter stuff enabled.
Enabled hardware GUI accelleration, stagefright etc...
Known issues
Sometimes when an app request root permissions it just "hangs". Resolved by restarting phone or just kill all tasks with a Task killer.
Some phone companies "borrows" other companies networks and will show as roaming when it didn't with the stock ROM. In this case you need to replace libcm.so and libril-qc-1.so with the versions from your stock 2.1 ROM. Updates attached for Saunalahti and Yesss.
Click to expand...
Click to collapse
from blade.modaco.com
tested on optimus san francisco [TFT]
d/l link?
please add it
Have a look here
Already release 2:
Download
Get it here: Japanese_Jellyfish_RLS2.zip
Lite version: Japanese_Jellyfish_RLS2_lite.zip
50% AHB bus overclocking at 480 & 600MHz addon: Japanese_Jellyfish_RLS2_ahb_overclocked.zip
Click to expand...
Click to collapse
Loc-Deu said:
d/l link?
please add it
Click to expand...
Click to collapse
sorry
added
I found this thread in modaco with themes for this rom if someone like to use
http://android.modaco.com/content/zte-blade-blade-modaco-com/327826/themes-for-japjelly-and-sebs-froyos-new-revo-theme/
i flashed the RLS2... works fine for me
I've installed "Extended Controls" and if you install a USB Tether "switch" on one of your homescreens and connect your Blade to your windows pc with a USB cable and press the switch, USB tethering DOES work with this ROM. (make sure data = ON)
joooker16 said:
I've installed "Extended Controls" and if you install a USB Tether "switch" on one of your homescreens and connect your Blade to your windows pc with a USB cable and press the switch, USB tethering DOES work with this ROM. (make sure data = ON)
Click to expand...
Click to collapse
I can confirm this. Works a charm with linux (Wifi Tether just throws an unspecific error tho)
joooker16 said:
I've installed "Extended Controls" and if you install a USB Tether "switch" on one of your homescreens and connect your Blade to your windows pc with a USB cable and press the switch, USB tethering DOES work with this ROM. (make sure data = ON)
Click to expand...
Click to collapse
What is "Extended Controls"? I'm now trying to setup native USB tethering on Modaco Paul's last 2.2 ROM and have no succes.
With this new ROM on what system your USB tethering works? I have Windows XP only at this moment, could it work on it?
TwistBomber said:
What is "Extended Controls"? I'm now trying to setup native USB tethering on Modaco Paul's last 2.2 ROM and have no succes.
With this new ROM on what system your USB tethering works? I have Windows XP only at this moment, could it work on it?
Click to expand...
Click to collapse
extended controls is a extended power control widgets
see herehttp://www.appbrain.com/app/extended-controls/com.extendedcontrols
Blade with 5MPx
Will there be support for the Blade with 5MPs camera? (aka Sapo A5)
eucurto said:
Will there be support for the Blade with 5MPs camera? (aka Sapo A5)
Click to expand...
Click to collapse
only if zte release the kernel for that device
until now we only have the kernel for the 3.2mp's camera
Confirmed 3G - USB tethering
3G tethering works in 3b release. Also standard "Modem" menu returned on its place in Settings. And great newest app for Radio already included in 3beta firmware. I think it's the best firmware now for Blade.
Occasional screen freeze
Hi there Mannas,
I got a ZTE blade for christmas and I put this rom on it and it is very good. I however am seeing the occasional screen freeze where, when I wake the phone up cannot use the screen. Now the buttons still work and I can press the power button and it responds giving the options but I cannot press any of them.
I am running this rom with SetCPU and Advanced Task Manager which I shall switch off to see if it makes a difference.
Any thoughts on how to capture this issue would be appreciated as its a good phone.. just a little frustrated why the screen input disapears occasionally forcing a reset with the battery.
adelamare said:
Hi there Mannas,
I got a ZTE blade for christmas and I put this rom on it and it is very good. I however am seeing the occasional screen freeze where, when I wake the phone up cannot use the screen. Now the buttons still work and I can press the power button and it responds giving the options but I cannot press any of them.
I am running this rom with SetCPU and Advanced Task Manager which I shall switch off to see if it makes a difference.
Any thoughts on how to capture this issue would be appreciated as its a good phone.. just a little frustrated why the screen input disapears occasionally forcing a reset with the battery.
Click to expand...
Click to collapse
I don't know what is happening with your phone. you should ask that question the original thread on modaco here is the link http://android.modaco.com/content/zte-blade-blade-modaco-com/327579/rom-froyo-japanese-jellyfish-rls3b-2011-01-01-oled-tft/
R4 is live
http://android.modaco.com/content/z...-japanese-jellyfish-rls4-2011-01-03-oled-tft/
tested on sapo a5 (portuguese provider)
only camera don´t work.
increase battery, and more fast than stock rom.
João
Update the main-post dude, Japanese Jellyfish is now version 6..
Japanese Jellyfish RLS7 [2011-01-13] [OLED+TFT], Facebook sync fix attached!
Downloads
* Japanese_Jellyfish_RLS7.zip (for normal Clockwork install) (115.7Mb system) MD5: 933CC50FF749D0CA2A5BBF611AB57B19
* Japanese_Jellyfish_RLS7_image.zip (for repartitioning and install) MD5: AD7423E804A16EA35394A4B912A6509B
* Japanese_Jellyfish_RLS7_ahb_overclocked.zip (50% AHB bus overclocking at speeds above 600MHz addon) MD5: 13229B3AC34C1917F1A0ECC4B82B4723
* Japanese_Jellyfish_RLS7_hw_ui.zip (Addon to enable hardware accellerated UI) MD5: F422A55C0322B02F1D6F106A31094A66
* Japanese_Jellyfish_RLS7_circle_battery.zip (Addon to enable circle battery indicator) MD5: A6D60415CE99757C61E8C02C4FA8AF7F
* Japanese_Jellyfish_RLS7_deskclock.zip (Addon to replace Alarm Clock with Desk Clock) MD5: FBBEB626B5E06D7EEF2097844C6525FB
Changing system partition size to 128Mb and data to 286Mb(FOR ADVANCED USERS ONLY ON THEIR OWN RISK!)
* Download the image version of the ROM and extract the "image" folder to the the SD-card.
* Power off the phone and when powering on hold Menu and Volume-up
* When some green text shows up saying it's installing a bunch of .mbn and .img files you may release the buttons and wait for it to reboot. (NOTE: I tried this on a TFT Blade and no green text was shown, just a black screen but after a while it rebooted and everything had worked like it was supposed to. Not sure if it was a coincidence or if TFT Blades doesn't show the green text)
NOTE! This also installs a bunch of firmware files from the Hungarian 256->512Mb update. It works fine on my OSF but do NOT blame me if it bricks your phone. You do not NEED to change partition sizes to use the "lite" version. It's just for advanced users who want to get more space for apps in /data. If this sounds confusing, then it's not for you.
Don't forget to rename or remove the "image" folder on the SD-card when you are done so that you do not reinstall your phone by mistake later on. Sometimes it enters the "image" install when you try to boot into bootloader mode if the image folder still exists on the card.
Go back to standard partition sizes
Repeat the above but with this "image" folder: http://www.mediafire.com/?xtckadj09b7sxt2 MD5: C8010D841AF463F3CB1FDEDFFAFA3B1E. After this you will have Clockwork Recovery as both boot and recovery image so you'll need to put a ROM on your SD-card and install.
Post RLS7 fixes (attached)
* Facebook sync fixed
RLS7 - 2011-01-13
* gps.conf back to pre-RLS6 version
* resolv.conf removed (don't think it was used anyway and have only seen it in CM releases)
* VPN menus enabled in Settings.
* Automatic time setting enabled in Settings.
* Signal indicators fixed (using same levels as in ZTE 2.1 ROMs)
* Original Alarm clock back (has more options) but can be replaced with Desk Clock through addon if DeskClock is preferred.
* Stock Filer app back as it can be good to have a simple file manager in place.
* Removed lots of lib connected to the iwnnime (japanese IME) that was removed erlier. (Size of system is now below 120Mb)
* Changed HH.MM time display to HH:MM in Danish, Norwegian and Finnish language files.
* Added more PPP options in kernel (for VPN).
* Circle battery indicator is no longer the default but can be added as an addon.
* Added Sebastians RA recovery (with CM colors) to the "image" install as it supports EXT4 and also the addons needs a recovery image.
* I'm sorry but it is NOT resigned with test keys as I promised it would be. I'm afraid resigning everything with testkeys can lead to problems when updates to "stock" apps like Gmail and Market arrives. This needs to be investigated further before testsigning the release.
Which kernel version is in RLS7?
Related
READ FIRST - I am no longer updating my ROMs - details.
If you're following the Hero scene, you'll know that I have published a custom ROM based on the 1.73.405.5 shipping ROM. I have a Vodafone Magic (32B) and a T-Mobile G1 kicking around (and HTC want my PR review unit Hero back!), so figured it would be cool to firstly build a really simple way for me to package my ROMs for all 3 devices, and secondly try and produce an update.zip that runs on all 3!
Well, the first step is here, I have the MoDaCo Custom ROM ready to install on your Sapphire 32B device (and a 32A version is available to test).
Things you should know...
- Contents are IDENTICAL to the MoDaCo Custom ROM versions detailed here.
- I have used cyanogen's kernel from 4.0.4 (big respect to cyanogen, he's doing awesome work!)
- Now compcache ready - use this script for a big performance boost!
It has room for improvement, but it runs really sweet already IMHO!
The download link (in update.zip format for flashing in the usual way via recovery image) is at: http://android.modaco.com/content/h...-modaco-custom-rom-hero-to-sapphire-32b-port/
I've packaged Cyanogen's 4.1.11.1 BFS enabled Kernel and wlan.ko as an update.zip too (see above thread) - nandroid backup before applying!
I've quoted some of my original Hero post here, so you know what you're getting. Enjoy!
P
Changelog
2.2.1 [32A only]
32A - fixed boot.img
2.2
Fixed SU and SD card bugs.
2.1.2
Updated busybox
Now compcache ready - use this script for a big performance boost!
2.1.1
Switch to Cyanogen's kernel
Fixed G-Sensor / Compass
Fixed sound
Unified Dream / Sapphire 32B download
2.1
Initial Release
me said:
This ROM is based on the Generic 2.73.405.5 release version of the 'new update' (together with my own optimisations) for the best possible performance! The ROM is now available in 2 versions - 'core' and 'enhanced' by popular request.
Included in both 'core' and 'enhanced' versions
- Rooted with 'adb remount' permission and superuser APK
- A2SD included (fully automatic - thanks cyanogen!) - create a EXT3 partition as your second partition to use. dalvik-cache remains on device. EXT4 is NOT supported.
- Added Jbed Java
- Added Spare Parts (run it and switch the 2 animation types to 'fast' for an even better experience!)
- Added Custom Locale for setting non english Locales
- Added android-wifi-tether 1.52 (props to the developer, this is a great app!)
- Added WMSM
- Added busybox 1.15 - tweaked such that 'get information' in Swapper now works as desired
- Added nano 2.09 - text editor for use in shell mode
- Added terminfo and settings to boot.img to allow nano etc. use
- Added tun.ko file (untested, please report on whether this is useful)
- Added files required for Debian linux
- Moved Quickoffice to data partition to allow easy uninstall
- Deleted 'Learn More' application
- Deleted Maps application - install from the Android Market to always stay up to date
- ROM now includes touch focus in Camera app
- ROM now supports shortcuts using BetterCut (and therefore I assume anycut!) in Rosie
- Silenced boot sound (it's still there and can be reactivated with a file edit)
- You can now check your MoDaCo Custom ROM (MCR) version from the about menu. It will display MCR2.0 (core) or MCR2.0e (enhanced).
- Fix for HTC Peep on Vodafone now available here!
Included in 'enhanced' version only
- Added Business Card Scanner
- Added 'Plurk' client
- Added WAP browser
- Added Chinese IME
- Restored Maps app (for users who cannot install it from the Market)
Click to expand...
Click to collapse
Is this ready to go as far as elimintating the blurry screen AND wifi ??
Just asking as the 1.5 and 1.51 both gave me fuzzys, and applying the update eliminated the fuzzys but took away wifi !
Either way. Thank You SOOO much I knew if I waited you'd give us something nice for the holiday !
You think a wipe would be needed going from 1.51 to 2.1?
Gimpeh said:
You think a wipe would be needed going from 1.51 to 2.1?
Click to expand...
Click to collapse
to avoid any possible issues, I'd suggest a fresh wipe. I didnt add to much after the last rom I flashed so im gonna start over with my sdcard as well
A wipe is always wise, but SHOULDN'T be necessary...
P
Going to try this one now. How is the bluetooth support? Can paired headsets now actually work when calling?
re: support for ANYTHING other than WiFi and Camera (which both work), I don't know!
Let me know stuff that doesn't work, and i'll try to fix it in the next version.
Consider this a starting point...
P
For 32A I recommend the 2.6.29 kernel that redglasses uses on his Hero ROM:
http://www.2shared.com/file/7555649/5881ee4a/myhero-110.html
Might be stuck, d'oh!
So far, did a nandroid, wiped, etc. Updated, rebooted, and after asking for the language and network settings it's sat at a blank screen for some time. Status bar at the top, if left alone and hit the call button the dialer will appear and afterwards you'll see the unlock screen. But it just unlocks back to a blank screen. :/
So far this is the first ROM I've run into that's done this interesting bit. Will maybe reformat SD Card and rewipe, or something.
Nevermind. Rebooted, and it somehow proceeded this time around. Strange, though :/
dont really care for blutooth sound, but will it work for wireless tether ?? thats what I miss from using non hero roms.. having wifi back is also nice !!
Success!
Only noticeable thing is that when you go to far away from the home screen (going into settings, the dialer, etc), and return, it has to reload again for about 10 seconds. But once it's there it's fairly snappy.
Bluetooth pairs and works like it should! I might just hold onto this version of the ROM and tinker with it for a while.
ZiBop said:
Success!
Only noticeable thing is that when you go to far away from the home screen (going into settings, the dialer, etc), and return, it has to reload again for about 10 seconds. But once it's there it's fairly snappy.
Bluetooth pairs and works like it should! I might just hold onto this version of the ROM and tinker with it for a while.
Click to expand...
Click to collapse
have u messed with the swap yet ? 64/60 should help with that or 96/60 perhaps
i just flashed this and still am getting the fuzzys !! grr,, guess i have to flash the update over the rom and loose wifi ??
Modaco if you could shed some light it'd be much appreciated !
WiFi, etc works. Other problem : G Sensors aren't working D'oh
BRAND1SH said:
have u messed with the swap yet ? 64/60 should help with that or 96/60 perhaps
Click to expand...
Click to collapse
My swap's a bit rediculously larger. It's not that bad a lag, but only really noticeable when going back "home" from an application.
No swap or compcache etc. out of the box yet, let's fathom out the best settings together!
P
I'll upload a 32A version for someone to test...
P
modaco said:
No swap or compcache etc. out of the box yet, let's fathom out the best settings together!
P
Click to expand...
Click to collapse
modaco,
I am having all kinds of problems with this rom im still getting a blurry screen, it froze on me 3 times, im stuck in portrait and i keep getting the htc loading screen. I downloaded the file twice to eliminate possiblity of a faulty download as well.
mytouch...amonra 1.2.1, ext3. might have to go back to 1.51 that one worked great
I can confirm that this is running beautifully on my 32A device using redglasses/myhero boot.img and wlan.ko.
Seems to be significantly faster than the 1.73 builds, thank you modaco! Now you just need the 2.84+ build as well
THIS ROM IS FOR NEW RADIO FOR 32A HTC SAPPHIRE(6.35.x.x) WITH ENG SPL 1.76.2007 ONLY !!!
First of all thanks goes to Amon_Ra for his recovery, MoDaCo for finding the 1.76.2007 SPL for HERO that works on Magic too and of course special thanks goes to all developers here who are working or have worked and developed for our magic devices
Thank you capychimp for everything that you did on this build
Thank you seo for transparent lockscreen
Thank you snq for a very good work on reboot powermenu
Thank you villainteam for friendstream,newsreader and legend mail widgets
Thank you tnp_lek for Wired Tether
Thank you idanfima for finding legend mail widgets
Thank you all testers
And last, but not least, thank everyone else that at one time contributed to this or previous builds of Smoki, I appreciate it
This ROM is based on official Rogers HTC Magic 2.1 update and uses a stock htc 2.6.29 kernel (COME ON HTC, WE NEED SOURCES FOR IT).
------What will you get in this build------
-Everything usual and official
-Gallery3D
-VoiceSearch
-VoiceDialer
-FriendStream app and widget
-NewsReader app and widget
-Transparent LockScreen
-Transparent Notification background
-EVO-like settings widgets
-HTC Clock Widget that flips like on those oooold 1.5 roms
-That good old 1.5 green Sense loading spinners
-Data partition 290MB big
-Apps2SD working with EXT2 and EXT3 partitions
-Brut maps along with the usual official Maps app
-ES File explorer
-aNetShare app for wireless tether
-Legend Mail Widgets
-Native USB Wired Tethering
-HTC_IME with Voice Input for English language (supports azerty for french language selection)
-TouchWiz3 Launcher
-LiveWallPapers with TouchWiz launcher or any launcher of its kind (like ADW launcher or Launcher PRO) - note that some big ass livewallpapers will not work after putting the phone to sleep
-Reboot sub-menu in phone power options
-A LOT of melodies for notifications, ringtones, alarms and such
-VoiceCommander that came in Rogers official rom ( placed on data partition for easy removal)
-Browser with easier copy-paste function
-MarketAcess app for simulating sim numeric identification to allow you to see paid and protected apps if it's needed
-Super cool bootanimation
-Removed Java app, Footprints app and widget, Stocks app and widget and all of them can be brought back by installing app pack found down below
-ZipAlign all newly installed apps on every boot
-Some cache files are being removed on every boot ( download and install app called CacheMate if you want to have your phone 100 percent clean of cache leftovers)
-Multilanguage
-Root and superuser...of course
-etc etc etc
-----Languages supported-----
-Czech
-Danish
-German
-English
-Spanish
-France
-Italian
-Netherlands
-Norwegian
-Polish
-Portuguese(Brazil)
-Portuguese(Portugal)
-Swedish
-Greek
-Russian
-Chinese
-Hebrew
-Japanese
-Thai(using morelocale from the market)
-What else you find
HOW TO INSTALL
* If you had signal loss problems with previous builds, make sure you follow the steps from 1 to 9 , the rest of you can also do this as it will bring you to the latest radio, but you do not have to. IF YOU DO NOT WANT TO INSTALL THE NEW RADIO PROCEED TO READ FROM STEP 9(including this step)
1)If upgrading from some other 6.35 radio, make sure you have 1.76.2007 engineering SPL installed
2)Make sure you have fastboot working
3)Download the radio.img file from HERE
4)Place the radio.img file in the folder where your fastboot is located(usually tools folder)
5)Connect your phone to pc using USB
6)Reboot the phone to bootloader(fastboot)
-You can do this by typing "adb reboot bootloader" in terminal
-You can do this by shutting the phone down completely and then boot it up by holding the POWER button and BACK button at the same time
7)Type in terminal console or command prompt console
Code:
fastboot flash radio radio.img
8)Now type
Code:
fastboot reboot-bootloader
and make sure you now have radio 6.35.16.19
9)Extract the already downloaded EXTRACT ME FINAL SMOKI X zip and place both newly extracted files onto the root of your sdcard fat32 partition(files have names Smoki_X.zip and Partition_layout_fixed.zip)
10)Reboot the phone to recovery.
11)Wipe data
12)Flash Partition_layout_Fixed.zip and wait for it to reboot back into recovery
13)Flash Smoki_X.zip
14)Flash Smoki_X.1.zip
15)Reboot the phone and wait for the setupwizard to appear
16)IF YOU GET FC ON FIRST BOOT BEFORE SETUPWIZARD(it's mostly FCing because of com.android.settings), REMOVE THE SIMCARD AND FINISH THE SETUPWIZARD LIKE YOU WOULD NORMALLY DO, LET THE SENSEUI LOAD AND PUT THE SIMCARD BACK
17)After you've passed setup wizard and after senseui has loaded, install whatever the apps you want from the market and do a REBOOT or else there are BIG chances you'll have sense reloading by itself for no reason on returning to homescreen
18)Double check to make sure you did a reboot like I told you in the step above
19)Go get me some Heineken
20)AAAAAAND yo're done
HOW TO REVERT PARTITIONING BACK TO STOCK
Partitioning reverts back in two occasions
*First one being getting back on old radio and thus flashing different radio, spl, recovery and erasing system
*Second being a manual one and includes staying with this radio and spl.
TO REVERT BACK AND STAY WITH THE NEW RADIO FOLLOW THE FOLLOWING STEPS
1)Download AmonRA 1.6.2 recovery patched by cursordroid from > HERE
2)Make sure you have fastboot working
3)Place the recovery image downloaded from the above link into the folder with fastboot (usually the tools folder) and rename it(basically just shorten the name) to recovery.img
4)Reboot the phone into the bootloader(fastboot)
5)Type from terminal or command prompt
Code:
fastboot flash recovery recovery.img
fastboot erase system -w
fastboot erase userdata -w
fastboot erase cache -w
6)Reboot into recovery
7)Flash whatever the rom you like(except smoki from 0.7.7 and up that needs partition layout)
8)Get me a double cheeseburger from Mcdonalds
-----Changelog-----
Smoki X.1
-Fixed slowdowns and lags and stuttering
-Better memory management
-Fixed low mic volume(thx cypis for testing)
-Fixed low memory on downloading bigger apps from market.
-Added Wired USB tether (huge thx to tnp_lek for finding out what's up with this)
-Added legend mail widgets(thx villainteam and idanfima)
-Added HTC_IME with voice input(english only voice input) and possibility to change to azerty keyboard (like the one in previous Smoki builds)
Smoki X
-New base - Rogers official 2.1
-Because of the above, and in addition to new radio, all of you who had signal loss with default base and had to flash GSM FIX, be assured, that is a thing of the past
-Added reboot menu into power boot options (thx nsq and capy)
-Changed kernel to official htc 2.6.29
-Because of the above, no more need for charging fix
-Because of the above, max freq is 528Mhz
-No more compcache because no kernel source available
-Tweaked settings, so we have multitasking available(it's not like on previous builds because compcache is lacking, but in comparison with rogers official rom, it's got more chances to allow more apps to run)
-Changed bootanimation
-All of you who met with already enabled data networks on first boot(3G, 2G, doesn't matter) will have enhanced GPS lock
-I'm guessing there's more to it, but I'm going to sleep and I don't have the will to think anymore...when I try to think about it, I DO BELIEVE that there is more to it, but that's where my thinking stops
DOWNLOAD SECTION
-Base ROM - Smoki X http://sourceforge.net/projects/smoki/files/Smoki_X/EXTRACT ME FINAL SMOKI X.zip/download
-No Wipe Update - Smoki X.1 http://sourceforge.net/projects/smoki/files/Smoki_X/Smoki_X.1.zip/download
-App Pack that will get you Footprints, Java app and Stocks app http://sourceforge.net/projects/smoki/files/Smoki_X/App_Pack_X.zip/download
-Hebrew Font Packhttp://sourceforge.net/projects/smoki/files/Smoki_X/hebrewfont.zip/download
***IF YOU DESTROYED YOUR PHONE IN EITHER WAY AND/OR YOU HAVE SOME POST TRAUMATIC STRESS SINDROME FROM VISITING THIS PAGE OR INSTALLING THIS ROM, PLEASE BE VERY ASSURED I VERY MUCH DO NOT CARE ABOUT IT...oh and yeah, I'm not responsible for those things...nor for anything else that happens for that matter***
reserved
THIS ROM IS FOR NEW RADIO FOR 32A HTC SAPPHIRE(6.35.x.x) WITH ENG SPL 1.76 ONLY !!!
First of all thanks goes to Amon_Ra for his recovery, MoDaCo for finding the 1.76.2007 SPL for HERO that works on Magic too and of course special thanks goes to all developers here who are working or have worked and developed for our magic devices
This ROM is based on Official 2.1 WWE Hero OTA and with this we are just one step away from the official thing !
This is SenseUI 2.1 ROM with newest 2.6.32 kernel for new radio by sanpei(BIG THANKS to you too bro for helping me with rom and for making a kernel that is currently more than usable for everyday use).
Thanks to capychimp for multilanguage.
Thanks to Taknarosh to his bootanimation which I have modified to make it work here.
Thanks to VillainTeam from Hero section for their work on friendstream and newswidget which I have used in 0.7 and up builds.
So to get to the point >>>>
Working :
-Pretty much everything usual +
-HTC_CIME
-MMS - From the box.....setup your apn for mms and data connection and you're good to go.
-Live Wallpapers - use with included ADW launcher or with some other launcher or the market that can use LWP (like launcher pro). I have not included any live wallpapers with rom as there was no space left, but you can download them from the market or pull out from some other roms that use more live wallpapers. Also note that some "high end" livewallpapers won't work properly and will die on screen off. No way for me to solve it for now, but there are plenty lwps that are working perfectly
-Multilanguage(thx capychimp)
-Optional JIT (find it below on this page)
-USB tethering
-LED charging light
-All HTC widgets
-Friendstream(thx villainteam)
-Newswidget(thx villainteam)
-290MB data partition
-EVO-like settings widgets
-Old-school green loading spinner
-Zipalign installed apps on every boot
-640x480 video recording (thx capychimp)
-Removal of cache on every boot(if you wish to have 100% clean phone from cache leftovers, take a look at app CacheMate)
-And more
Not working/Missing :
-LED notifications only in green (install HeroLED from Market if you wish to have all leds, but you're doing it on your own - I won't give support if it breaks something)
Languages supported :
-Czech
-Danish
-German
-English
-Spanish
-France
-Italian
-Netherlands
-Norwegian
-Polish
-Portuguese(Brazil)
-Portuguese(Portugal)
-Swedish
-Greek
-Russian
-Chinese(later coming)
Before flashing this, DO A WIPE AND DELETE ALL ANDROID FILES ON YOUR SDCARD(files which aren't yours like Android, rosie_scroll and etc ; leave music, DCIM and stuff like that)
READ THIS BELOW !!!
If you get missing HTC Widgets at any point, go to Settings > Applications > Manage applications > HTC Sense > Clear Data > press home button > wait for SenseUI to load up
Please people, read additional info to see if your problem is mentioned there or some no wipe update for something before posting a question. Thank you
Check up on logcat from time to time either via pc or using quick system info that's included and look for any signs of bluetooth getting stuck on reading databases as that is a known issue with this latest kernel
IF YOU GET FC WHILE BOOTING FOR THE FIRST TIME WHEN TYPING IN YOUR PIN CODE, REMOVE YOUR SIM CARD AND BOOT AGAIN, SETUP EVERYTHING, LET IT LOAD AND THEN PUT BACK YOUR SIM CARD
DOWNLOAD :
****0.8****
-Fixed Weather Animations (or Weather Wallpapers, how HTC calls them...you know...the thing that animates your weather when you unlock your phone ? The thing most of you got all excited when 2.1 came out first ?)
-Changed the way init.d script executed to allow zipaligning of apps on ext partition(thanks to mrsaccess for making a point )
-Governor changed to ondemand again and disabled one more sched function
-Fixed sleep death bug (I hope)
-Maybe fixed fc on first boot for some users(that's just a maybe, so don't take my word for it...either way, you should wipe to test this)
-Brought HTC wallpapers back to system partition and linked them back to their place in HTC Wallpapers sub-menu(when selecting a wallpaper). You are free to remove smoki htc wallpaper folder from your sdcard
-Optimized compcache and memory management and I think it's now for good - I DO NOT SUPPORT TASK KILLERS** OR APPS THAT CHANGE INTERNAL ANDROID TASK KILLER SETTINGS
-Faster, smoother....and yeah, I am saying that for most my versions, but yeah, it is like it, it's just all those other problems make it look awful....now, I hope that's not gonna happen
-Possibly better battery life
-Placed some important stuff directly into RAM(still experimental, but just so that I am not completely sure what should be directly placed there, functionality remains the same)
-Because of the above, you get faster starting browser, faster loading pages in browser(those are most noticeable)
-Because of the above, freed 7.3MB from data partition (the added twitter app and droidx keyboard is gonna make it up for it, but as that's uninstallable, you can reclaim that space )
-Added Hebrew, japanese and more languages(thanks capy) - flash the appropriate font pack to get hebrew working properly
-Removed Peep(HtcTwitter) - HTC forgot that Twitter announced last December that it was changing the API;so now it's basically useless to us - when HTC fixes it, I'll bring it back
-Added official Twitter app as a replacement for the above - you can uninstall it as it's being placed on data partition
-Removed ADW launcher as it can be easily found on the market
-Added Samsung TouchWiz3 Launcher (thanks to kenshin for making it for mdpi devices)
-Added DroidX multitouch keyboard - it is placed in data partition, so you can easily uninstall it
-Updated brut.all maps to build v16 (it is uninstallable)
-Maybe something else....I really cannot think of anything currently lol
** if you have some app stuck or you know that app drains your battery, then you can use task killer to kill it, what I meant above is that I do not support constant killing of normal apps and most of all...automatic killing of them
****0.7.8****
-Fixed extreme battery drain
-Fixed extreme slowdowns and FCs overtime(it might be even more snapier a bit because of this)
****0.7.7****
-Partition layout changed to get us 290MB data partition
-Fixed slow market upon first boot
-Fixed total freeze when installing apps
-Bluetooth should behave a bit better
-Lowered the slowdown when listening to music and doing other stuff
-Changed the governor back to performance and also disabled some scheduler features
-Changed memory settings and lowered swappiness
-Reverted dalvik cache to data partition again as there is no more need for it to be on /cache
-Because of the above, first boot will be slightly faster
-Added script to delete cache files upon every boot (thanks dominukk for initial script and the idea - use CacheMate from the market if you wish to clear ALL of your caches and keep your phone clean 100% clean )
-Fixed long first boot senseui loading screen
-Changed HTC_IME with the one with voice input(english only voice) which is a bit more responsive (yeah, you can change the language on that one again)
-Updated MarketAccess app to latest build
-Updated Brut.all Maps app to latest build (v15)
-Most apps should open as fast as they can and process as fast as they can
-Hopefully fixed rosie reloading with friendstream and newswidget on home
-Added eStrongs file explorer app latest version as per requests of a lot of people
-Brought back the good old green loading spinner like in 1.5 sense roms (it might not be the absolute same color, but it's pretty close - thanks to my friend Milos )
-Popup messages won't take forever to load and unload anymore
-Replaced battery icon with the one with bars(the one Binary had in his 4.xx CM theme and the same one as in cursorsense)
-This build *might* be a bit more stable with JIT, but that's just a guess - please use the new JIT zip to activate it
-Added 640x480 video recording (tested on both JIT and normal version) - thanks capychimp for being the first to implement this in his roms
-Fixed FC for Jbed.apk(it is found in addition apps pack as it runs most of the time in background even if not in use)
-Removed Jbed.apk, Stock.apk(and the apps widget)(it was syncing even if you don't even use it), Teeter.apk and Footprints.apk(and the apps widget) - all of those apps can be found in app pack
****0.7.6****
-Smoother UI with friendstream and newswidget placed on home(note that these two widgets do a lot of work in the background when you go to them, so it can be a bit choppy at times, but a lot less now)
-Should have fixed Rosie reloading when newswidget and friendstream placed on home OR at least lowered the possibility for it to happen (I tested this on JIT only, so if it's not working with no JIT, tell me)
-Some apps will open faster and react faster
-Tweaked memory settings
-Tweaked compcache settings
-Tweaked some other stuff
-Added legend browser
-Added transparent lockscreen - big thanks to user seo
-Fixed loud minimum media volume
-Updated JIT to v9 (if you wish to continue using JIT, do flash newer, it should be more stable - also note that I've fixed jit disable
-Added charging problem fix - see down below for download link (it is separate from the base update)
-Maybe something more...it's been a long time since I started this update lol
****0.7.5****
-Added chinese support(thx capy)
-A bit smoother/faster UI
-Removed weather animations because of the memory leak
-Because of the above, you'll no longer have any slowing down or lagging or sluggishness after some period of using the phone
-Added zipalign of apps on data partition on boot
-Brought back compcache
-Tweaked around memory stuff
-Battery should be better
-Fixed problem of protected apps not showing
-Fixed problem with Rogers cutting off data when using this ROM
-Added powertop for viewing battery usage
-Updated SuperUser from ChainsDD to newest, 2.2, version
-Added shell reboot
-Should have fixed the problem of apps reloading themselves when they are in use(market app, people app and etc)
-Rosie (Sense Home) should not reload anymore that often
-Changed apn list - there could be some apns missing here, so if your apn is one of them, contact me via pm and I'll add them
-Maybe something more, I really don't remember
****0.7****
-New base, smoother base
-Changed bootscreen animation
-Added Friendstream
-Added Newsreader
-Added Today in History widget
-Added HTC Navi panel as per requests
-Brought back weather animations
-Left normal maps app and added brut.all maps v14 (uninstallable)(thx brut)
-Updated ADW Launcher
-Replaced lockscreen with desire like one
-Speed tweaks
-In sense with this above change, *everything* is faster
-Improved 3D performance
-HTC wallpapers have been removed from phone, but they are copied over to your SDCARD in a folder named "HTC_Wallpapers_Smoki" - watch out when reflashing multiple times, be sure to delete this folder before reflash
-Fixed problem with the missing ringtones and bootanimation when doing a nandroid restore
-Fully deodexed and optimized build
Smoki 0.8
DOWNLOAD - I recommend a wipe, but you *could* do a no wipe if coming from 0.7.x although you might loose some stuff from changelog and you also might have other problems If you had twitter account setup in previous builds of smoki and you're doing a no wipe update, please remove the twitter account FIRST(before flashing 0.8)
MD5 : c524e069d84a35af377936864b36e5d8
**********Charging FIX**********
DOWNLOAD
-This is the kernel build from 0.6.8 with all the tweaks from 0.8. Do note that you might experience slightly faster battery drain or some other weird stuff that the original 0.8 does not have. Also note that this kernel is not overclocked.
**********App Pack**********
DOWNLOAD APP PACK - Will install Stocks app, Jbed.apk (Java app), Teeter.apk and Footprints.apk
**********Hebrew Font**********
DOWNLOAD Hebrew Font + Keyboard - thanks capy
IMPORTANT!!! READ BELOW
Proper Install Guide for 0.8
-Extract the zip file you have downloaded
-Place the two newly found zips on your sdcard
-Reboot into recovery
-WIPE DATA
-Flash Partition_Layout.zip and wait for it to reboot back to recovery
-Flash Smoki_0.8_FINAL.zip
-Reboot
I really hope that developers will adopt this partitioning, but until that happens, IF YOU WISH TO FLASH SOME OTHER ROM AFTER FLASHING 0.7.7(other rom in means previous builds of Smoki or some other custom rom made by other devs), DOWNLOAD THE FILE BELOW AND FLASH IT RIGHT AFTER FLASHING NEW ROM(that applies to updates to that rom as well)
DOWNLOAD BOOT PATCH
IF you wish to revert back to the default partition layout(which is not needed unless you're taking a phone for a repair or you're just unsecure) do this :
Code:
-Wipe data through recovery
-while still in recovery, type adb shell reboot bootloader
-Download some new radio compatible recovery and place it in tools folder and rename it to recovery.img
-fastboot erase system -w
-fastboot flash recovery recovery.img
For older releases of Full ROMs and Updates, find them on >>> SOURCEFORGE
IF YOU GET GSM SIGNAL PROBLEMS, FLASH >>>>> THIS
***I, sanpei, xda or anyone else here for that matter, am/is/are not responsible for damage done to your phone while flashing this.
Testing now : )
I would like to thank you for your work, i'm looking forward to it and downloading as I'm writing it!
Regards!
Sorry I'm green I'm d/ling now rom from first link - how must I partition my sd card ? because you wrote something about cache and data partition ?
The good thing about it is that you don't have to partition anything really...unless you want apps2sd, which I presume you weren't asking about
So I don't need to do something with my sd card ? I can just flash this rom with one fat32 partition on sd card ?
Yup. That's how I'm using it
Ok, so I'm flashing now and testing
Great work ... It seams very stable and fast .. I'll update you if a find anything that is not reported yet!!! Thanks so much for all the work!!
First impressions are very nice. It's very very fast rom :O I will continue testing when Magic will boot up because when I try to dial a number he hang up :/
I've to update all people of this:
- This is the first ever 2.1 ROM that I can put ALL application that I was using in the 1.5 working without any FC or reboot required.
- My WLAN connection is able to download without making any timeout.
- Lost of space for app's
- Fast and responsive
- Exchange also working with no issues
Things I haven't test:
- Make phone calls Is 4:55 AM
- HTC Sync (I don't use it, ADB works great)
Once again I would like to thank for this wonderful work!
I can totaly agree with #ricardomega - rom working great. Smoothly, fast and looks stable (ony one crash for me). If battery performance will good I will leave this rom for 24/7 usieng
great work!
BTW is there any possibility to make some additional languages ? (polish for ex)
Gonna give this a try! Thanks!
Works really well! Nice and fast and because you can choose between sense ui and launcher 1 & 2 u get the best of both... well of all three worlds!
My only complaint is that I can't seem to get Friend Stream to work. Any ideas?
Also, would be really awesome if the launcher2 could have the apps 'wrap around' at the top and bottom of the list instead of just disappearing? But that is just a minor request to make it look better
Will be using this one as my daily rom for the time being until the next awesome rom comes along
I got the 4gb sdcard fat32 with no partition. Which one can I download?
shokuhawan said:
I got the 4gb sdcard fat32 with no partition. Which one can I download?
Click to expand...
Click to collapse
Read my earlier post I was asking about the same thing - download from first link
Anyone having problem with mms ?
I can't get the fix to work.
lerutis said:
Anyone having problem with mms ?
I can't get the fix to work.
Click to expand...
Click to collapse
1st post : http://wiki.xda-developers.com/index.php?pagename=VillainRom3.2FixesMmsSettings
It tooks 3-4 minutes to boot.
Everything else goes great and smooth
adb doesnt working for me...
win7.HTCSync installed as admin
This is the Froyo FRG22 image for our Milestone. but as this is not using the kernel, there are some limit to functions based on kernel requirement. But its close, and works great and is alot faster.
You can also follow updates on Twitter now: Dexter Picard (DexterPicard) on Twitter or
me a Red bull, and you're sure i stay up working on this mod´or you can visit my new homepage at Dexter's mods
Primary Image download - MotoFrenzy v0.52 FULL image
OLDER FULL RELEASES -
MotoFrenzy v0.51 FULL image
MotoFrenzy v0.5a FULL image
MotoFrenzy v0.4 FULL image
MotoFrenzy folder goes into /nandroid/adbrecovery on your SDCARD
ALWAYS WIPE YOUR PHONE BEFORE INSTALLING A FULL IMAGEPatches
none
download the latest attached zip , and inside you find a MotoFrenzy-vx.xx-update-nosign zip , which you copy to your sdcard into the folder /OpenRecovery/updates and recover from OpenRecovery menu.
Patches only match the release which it is made for. so 0.1 release has patches 0.1(a-z) and so on. you cannot use 0.1a on a 0.2 release.
THEMES (works on 0.5 but FRG22 features are lost)
Themes applied with OpenRecovery, will automatically format(factory reset) your phone, as these has different signatures and cannot be used on top of this releas without factory reset.
Download http://dext3r.komodin.org/MotoFrenzy/MotoFrenzy-v05-FRF91-stock-theme-nosign.zipTheme - Nexus1 theme for froyo.
This theme is based on Modaco R21 release with chinese included too.
it has multilanguage support and france,germany,italian,portugese and some chinese(i cannot pronounce) as examples
hw keyboard light only works when "auto" light is disabled. (use power panel, so you can manage light if needed)Download http://rapidshare.com/files/410811694/MotoFrenzy-v04-theme-UDexteme5.0.1--nosign.zip.htmlTheme - UD Extreme 5.0.1 for froyo.
This theme is primarily "dark grey".
All credits goes to Ultimate Droid for the making of this mod, i just ported their Droid release to run on our milestone.
You should note, this uses an alternate launcher(PRO) and added functions(UDParts menu) into menus for configuation and as example DISABLE/CHANGE PREFERRED STORAGE for Market downloads, which we, with a 2.1 kernel can utilize. Please visit their site to see the pictures of this mod.
I have not have the chance to test all options of their menu functions but it looks promissing.Download http://rapidshare.com/files/410815633/MotoFrenzy-v04-theme-stock-theme--nosign.zip.htmlTheme - Droid FRG01 stock theme for froyo.
Original theme coming with 0.4 image. this is primarily just for easy restore.STATUS
WORKINGCamera
Bluetooth
GPS
Radio (GSM,GPRS,HSPA)
Wifi
SDCard detection
USB / ABD
AC Charging (milestone specific option)
3D games / full display support
Video playback (Youtube etc..)
Wipe
G-sensorNOT WORKINGVideo Recorder + camera focus/audio
INSTALLATION
FULL Images are copied to the SDCARD into /nandroid/adbrecovery folder, and installed from your OpenRecovery menu.
Patches are copied into the /OpenRecovery/updates folder, and installed from openrecovery menu.
Radio Band Requirements for different countries
Some countries require the original 3G files of your current ROM to work ie. Canada, Brazil, Venezuela, Germany and some others countries uses a different band for 3G. If u dont backup the 4 original 3G Files and restore it over this nandroid once installed u gonna have poor signal, sms problems and HSDPA loss (even if u set apn and get conection its gonna be crappy one).
Files should be in the /system/etc/motorola/bp_nvm_default/ of your phone.
Files can only be copied from OpenRecovery , using adb shell.
Latest v0.5 has builtin install option using GScript , so you can get the radio replaced/installed. without update zip files.
You might check this thread , if a update-nosign.zip file exists for your model. which makes it easier for you to install.
Filenames are:
File_Audio
File_Audio2
File_GSM
File_Seem_Flex_Tables
generic_pds_init
Changelog history
v0.52: 13-09-2010- native froyo apps2sd now working, thanks to Nadlabak on his work on this. you can call it a preview of his cm6 release looking forward to it.
- location fix, mistakenly updated complete gapps update, but not compatible with our milestone.
- vpn correction.. (thanks to Pooyan for supplying the account to verify it with)
- adobe flash removed (download and add externally, the enabler i made is not working)
- youtube,twitter,maps,voice updates possible in this version (problem related to gapps update)v0.51: 11-09-2010
- updated google apps so updates are possible.
- added missing flash apk. (use gscript to activate)v0.5d: 10-09-2010
- Deodex'd framework.. added custom circle battery stats + E/3G baseband icon.
- DLNA + Files apps (original from MotoBlur) included.
- "Files" it makes it possible to copy from/to/between windows fileshare.
- DLNA service is for now still testing- replaced battery stats lib..
- corrected /etc/gps.conf , added google info + Europe NTP services.
- fixed libril driver (earlier version had problems)
- added notification information onscreen, when shortcuts are used.
- re-enabled panic daemon reboot, if/when a process fails (such as radio process)
v0.5c: 28-08-2010- Added Ext2 filesystem check before mounting.
- init.rc changes
- New Keyboard shortcut functions (hold all 3 keys to activate)
- Spotlight switch (LEFT SHIFT + A + DPAD CENTER)
- hw keyboard light switch (LEFT SHIFT + A + L)
- Disable apps2sd (LEFT SHIFT + A + U)
- Enable apps2sd (LEFT SHIFT + A + T)
- start adb (LEFT SHIFT + A + X)
- restart RIL(phone driver) *TEST* (LEFT SHIFT + A + SPACE)
- copy all downloaded apps to sdcard (LEFT SHIFT + A + P)- Latest Overclock module + app (v1.4) and is now activated (550Mhz) even if no "overclock" file is found on /sdcard
v0.5b: 23-08-2010"Call waiting" has been fixed.v0.5a(a): 22-08-2010blue led startup fix + usb fix + GScript app + apps2sd ownership mount fix.v0.5: 21-08-2010Release updated to FRG22 (official Droid OTA release)
Apps2SD ext2 partition supported (no more need for use_apps2sd trigger)
Fixed data signal icon to show E/G/H types
Added GScript script options for ease of use.
- Included overclock file creation (Default 550Mhz)
- Baseband installation option (several countries included)
- Switch GoogleEmail app (Exchange policy on/off)
- See space free on EXT2 sdcard partition (partition2 only supported)
- switch build.prop (Nexus1 and Droid)
Corrected hw keyboard link, so G.O.T hw keyboard recovery should work now.
Dalvik cache now moved to /cache folder
Adobe flash 10.1.72 included seperately
v0.4: 03-08-2010Camera starting to work a little, but has FOCUS problemCompletely new rebuild with Droid stock FRG01BFlash 10.1 included as apk (push it to the phone with "adb"
its no longer possible to download with this release.
build.prop does not match.see bottom of this post for AudioEffect application, and download zip here.
Removed old changelog below v0.4, seems useless now...
the greetings
Nadlabak - compiling and testing native froyo apps2sd functionality.
Pooyan - getting vpn working
Fightspit - circle battery icon stats.
Anonymous - betas of images.
Thyrus - early versions testing with alternate framework
Luis - themes
OMG
this is for real !???
wooooww coool, now we dont have to wait the slowpoke motorola to release the froyo
keep working man
thank Dexter_nlb.
Nice!
Could someone host the file somewhere else, please?
Not working here, a warning appears and screen turns black.
Same here... warning screen flashed then nothing.
what a great job ! thanks
good news! thanks.
Flashplayer works?
Sent from my Milestone using Tapatalk
Wow that is great news, thank you very much.
Just one - F**k yeah, damm Motorola no need to release Froyo, we have Dexter_nlb
waiting for new release
Thanks!
so it worked?? I have ever opened a thread about not touching the kernel, but only upgrade the OS
amazed this is possible, i will try this
Amazing Work!
Hopefully we can build on this ;-)
wow!
how did you manage it with the bootloader?
you are my hero!!!!!!
barach said:
Flashplayer works?
Sent from my Milestone using Tapatalk
Click to expand...
Click to collapse
Yes, Adobe Flash 10.1 Beta 3 works fine
FIXFILES for offline image - MotoFrenzy v0.1 missing dump files (5MB)
Sorry, but i was hoping that i could do without, but you prove me wrong here...
These fixfiles are for those that get the first image..the other image will be uploaded again with a all files included.
rapidshare is driving me nuts!! perhaps you could upload it somewhere else? thx!
yantz
yantz said:
rapidshare is driving me nuts!! perhaps you could upload it somewhere else? thx!
yantz
Click to expand...
Click to collapse
Mirror 2 - MotoFrenzy v0.1 missing dump files (5MB)
megavolt007 said:
Same here... warning screen flashed then nothing.
Click to expand...
Click to collapse
I come to think that you used WIPE after installing image?
There is a check builtin which checks if app files are missing,
was that the "warning" you saw?
thx a lot dexter! actually i was referring to the new image you were abt to upload thx once again
yantz
Here is a flash image for the dream of the MT3G ASOP (T-mobile OTA) 2.2 release. Including the most recent security update!!!
[SIZE=+2]MT3G-test3_S.zip[/SIZE]
(MD5: efff33db482ea3b6da3b247516be6a7f .. last updated 11/21/2010)
Please note this includes my 20101106 - 2708 ported kernel, for those requiring other kernels see addons
Requires:
* [Size=+2]1.33.0013d or 1.33.0013 SPLs with recommend 2.22.28.25 radio[/size]
(32b devices only) details on this post..
If you refuse to upgrade or can't upgrade because you have a 32a (1.2 or classic) device: you will need an alternative kernel as described in step 4.b 4.c or the phone will not boot
Note: 2.22.27.08 will also work but is not how the ota was shipped
* Uesrs of other SPLs can either use Danger (dream only), any sapphire SPL on the magic/sapphire/MT3G or alternatively Custom MTD I recommend "87 2" (system/cache) {as of test3 06bindcache will work if you install the parts package, thus if you use CustomMTD parts is mandatory to avoid market issues}
To install:
1) Wipe with 'fastboot erase system -w' (A no-wipe upgrade from test-2 will probably work)
2) flash MT3G-test3_S.zip
3) You will be prompted if you wish to install AmazonMP3 (answer yes/no)
4) You will be prompted if you want to set gprsclass set to 12 (you probably wish to answer yes)
4.b) If you have a 32a or 32a 1.2 magic install the ebi1, ebi0 kernel respectively from here: http://goo.gl/qFJO
4.c) If you have a 32b dream/sapphire without the new 2708 spl/radio install the ebi0 kernel if your radio starts with 2.22, or the ebi1 radio if it starts with 3.22 here: http://goo.gl/qFJO
5) Optional flash "DroidX keyboard" add-on
6) Optional flash "parts" add-on
Alternatively the rom is now available in RomManager; and will install the rom and correct version of the 20110222 kernel; also will allow you to choose between the components parts, droidX keyboard, and language packs.
Whats included:
1) su/superuser from CM6
2) my cm6 optimized pershoot based kernel described here
3) wifi working
4) bluetooth working (fixed inv2)
5) keyboard working (fixed in v2)
6) Rom contains English/Spanish only (Other languages available as language pack addons)
7) No sim card required (fixed with v2 market fix)
Many additional packages included in the parts addon.
To see information on the original Test2 release vist This Post
What not working:
* CM6 potential USB power issue (its not horrible on 2.6.34.7 but if you notice it reboot, or plug in a wall adapter)
* Sound Recorder shortcut missing, this looks like a bug in the OTA not the port a workaround
What to do if it bootloops
Before posting that the rom will not boot; please verify the following:
1) Check that if you don't have the newest radio SPLs *OR* don't have a 32B phone; that you install the correct kernel as mentioned in step 4b/4c in the installation instructions
2) Please use Super Wipe immediately before installing (ie. flash super wipe; restart back to recovery; then install the rom)
3) If you did not install it; install partsB; this will fix some date related bootloops that happens after flashing some of the radios. (after you can login and set the date correctly feel free to re-install without parts if you really don't want it)
4) If your phone is still bootlooping; after a clean install make sure you run 'adb logcat > logcat.txt' on your computer just after rebooting into the rom. Then paste the logcat contents into pastebin copying the link to this thread.
This may sound overkill but its the easiest way to make sure its not your error during install.
Addons
A|| Kernels:
The set of kernels used with this rom can be found: http://goo.gl/qFJO
> MT3G 1.2 (fender users) please use the EBI0 kernel
> 32A magic users (and rogers dreams who have not updated to a 2708 radio) please use the EBI1 port
> Dream/Sapphire users with older EBI0 radios may also use the EBI0 kernel with this rom.
B|| Parts Add On:
MT3G-test3-partsB_S.zip
MD5: 58b80345db33c95a92f9be77ee67cc43 (update 12/01/2010)
What is it you ask.. It adds support for many things on top of the base rom
(note if you are upgrading from the original Test3-parts this is a no-wipe update)
1) Add support for init.d scripts
2) Add support for 'adb remount'
3) Add support for live wallpapers (apk kanged from CM nightly 238, and odex by myself)
4) Add busybox in a squashfs (binaries kanged form CM nightly 238; and repacked since I didn't want all of them) Note test3-partsB restores the toolbox netstat link to correctly display netstat information again.
5) Add LWP fix (fixes various 3D) via init.rc permissions (based on firerats work) updated in test3-partsB to fix slow performance in many games.
6) Added fix_permissions script (this one kanged from biffmod 2.1)
7) Load ipv6 on boot
8) apn list from CM238 nightly (new for test3)
9) flash_image from CM238 nightly (new for test3)
10) date verification; if year is < 2010 set the date to a more recent date (prevents initial boot boot loops for some users) added in test3-partsB
11) And Last but not least:
Added "Froyo Parts" apk custom menu interface to (this is my work k, thanks.. but certainty has ideas from pre-eclair apps2sd and firerats scripts):
internal -> /sd-ext
a. dex2sd (/data/dalvik-cache)
b. data2sd (/data/data)
c. apps2sd (/data/app & /data/app-private)
d. Keep Home in Ram (thanks to raven_raven's idea) [new test3]
e. Compcache 18MB (based of CM's script) [new test3]
f. Restrict /dev/hw3dc most games run better with this disabled; however some work better with it enabled (no reboot required) added in test3-partsB
Check the one or more to gain additional space; allow the app root permissions and reboot; the files will be moved accordingly.
All options only apply on next reboot, so if you make a mistake just revert
Previous 11/21/2010 version
MT3G-test3-parts_S.zip
MD5: 199475ba609396114049adbe196d571a
C|| DroidX Multi Touch Keyboard:
A new addon for those that like the DroidX Multi Touch Keyboard.
Thanks to RoyalKnight6190 for the biffmod port this is based on and in turn punk.kaos for the version that works on your phones
This is odexed to save data space and WILL replace the default keyboard
MT3G-test3-DroidX-kaosfix-v3_S.zip
MD5: 5f7f7cf54f8224976be173dca9543c57 .. last updated 11/21/2010
D|| Themes:
* See shadowch31's True Blue Theme:
http://forum.xda-developers.com/showthread.php?t=856165
* Also roalex's OTA Gingerbread (for froyo):
http://forum.xda-developers.com/showpost.php?p=9686189&postcount=1440
(enough work it could be its own rom so do check it out)
* sisterchick's Themes for OTA
http://forum.xda-developers.com/showpost.php?p=9894072&postcount=1567 - Blue Revo Theme
http://forum.xda-developers.com/showpost.php?p=9944245&postcount=1586 - Peppermint Twist
http://forum.xda-developers.com/showpost.php?p=9955951&postcount=1590 - Orange Slice/Green Revo/Grape Jelly
* Simple Black Bar
http://forum.xda-developers.com/showpost.php?p=9771131&postcount=1493
A simple black status bar mostly intended to aid others in porting dark status bar themes; but can of course be used on its own.
* castaway1 x10 bar style
http://forum.xda-developers.com/showpost.php?p=10328491&postcount=1647
Note: The clock will be black on black unless you flash the "Simple Black Bar" theme with white clock followed by this themed status bar.
E|| Lang Packs:
Non-supported language starter packs
see this post (update 12/11/2010)
These are for test3 only and provide the options to add [fr,pl,de] or [ja,zh] or [it,ru,nb] or [cs,ko,tr] to the existing en,es rom.
F|| Disable Menu Unlock:
No this is not a bug fix; the Rom has a feature coded in to allow the menu key to unlock the screen as could be done on the phone before the update.
However for those that don't like this feature here is a hacked version of the framework to disable the menu unlock, and enable the "H" notification.
MT3G-test3-disabelMenuUnlock_S.zip
MD5 SUM: 897bf28ee97db05395935f0e29b20967
Please note this will not work with the language packs or themes (of course a theme or custom language pack may include this functionality)
G|| Kernel Updates:
An update to the included 20101106 (and related 20101031) kernels can be found:
http://forum.xda-developers.com/showpost.php?p=11565574&postcount=670
Simply flash the kernel update.zip matching your configuration
FAQ:
* Installing Titanium + Root Fails: You require BusyBox for Titanium to work; this can be installed via You can either install the parts package or install via titanium its self
* I need ipv6 loaded on boot to run goggles or other app: This is included in the parts package; if you wish not to use the parts package see this trick
* adb remount doesn't work and this rom doesn't have root.. yes 'adb remount' fails because this is a stock rom.. however NO just because that fails doesn't mean there is no root. see this post in short modify /system in recovery its safer than adb remount anyway. Also ADB remount has been added to the parts package
* I want to revert from the DroidX keyboard to stock: re-flash test-3 followed by parts if you flashed parts. (do not wipe)
(In short if you are having issues with advanced features try out the parts package )
Note:
This is only a quick hack of the official MT3G rom; please don't expect me to make major changes to it (If I'm doing that I'll build from ASOP source)
(Changes: version 2 fixes bluetooth and the keyboard + audio levels for dream + removes OTA key so it won't ask for any future updates)
(Changes: Market-fix; applies the updated files from the OTA fix; in addition to allowing you to signon [or skip signon] without a simcard)
(Changes: Test-3 parts improvements + security update included)
thanks for this fast port. i will give feedback =)
EDIT: wo mtd its working smooth. just one faves fc and otherwise no issues. maybe you could say that gapps are included and working ^^
Currently flashing too, many thanks! Was gonna have an early night, cant see that happening now!
Update: Flash went well, booted up nice and quick. Upon setup screen I left it sit for a few mins after the screen turned off. I then proceded to set up passed the initial screens but it failed to connect and stated "you dont have a network connection". It found my router fine, carried on with the set up and synced. So for me so far I have no mobile data connection. Overall it seems nippy and responsive, will keep testing it out...
What did you do!?!?!?!? this is perfect!!!!
Browser, Gallery, Search, Calculator, Phone, Messages, etc ALL OPEN AT THE SAME TIME, no swap, no compcache (i think, free/busybox is broken) SUPERFAST FROYO
Thanks man.
Quick question... is this insane speed due to that i haven't logged in to google yet? or is it due to your awesome kernel? or neither? What's different between the EXACT kernel used in here and the pershoot ones?
Thanks.
James Carr
I desperately want to flash this, but I'm slightly nervous because my MyTouch3G (or HT-03A, in my case) was bought in Japan and subsequently unlocked for use in another country. I see that SU was implemented, so I'm not worried about losing root. Basically, besides the normal risks of flashing custom roms, is this going to create a danger zone for me?
Update: gave it a shot. Installs and boots like a race horse, but sadly it's not a phone. I keep getting the phone itself FCing (com.android.phone) and thus it kind of loses it's functionality. Going to give it another wipe and flash, see if that helps.
Second edit: no love. I know this is going to be huge, and I already can feel/see the amazing speeds present here. BUt if I can't make phone calls, it really can't help me right now. Good luck man, I'll be rooting for you!
jcarrz1 said:
What did you do!?!?!?!? this is perfect!!!!
Browser, Gallery, Search, Calculator, Phone, Messages, etc ALL OPEN AT THE SAME TIME, no swap, no compcache (i think, free/busybox is broken) SUPERFAST FROYO
Click to expand...
Click to collapse
I kept it stock; stock has no busybox but you can push it from somewhere else if you wish
The compcache module is included if desired; also setcpu will allow upto a 595oc with this kernel; (a safe 576 max by default)
Very little injected my kernel+modules; and su/superuser.apk from a cm6 build so you keep root.. and copied init.sapphire.rc to init.trout.rc (removed the radio+recovery components of course since I assume you wish to keep the custom recovery)
Without bluetooth this is like a one engine jet plane .
No PAN , no can.
i have a funny feeling t-mobile, google and htc are dicking us around, yawn.
http://imboredatwork.org/boredbaby.jpg
This is absolutely amazing, the speed is as fast as donut, unbelievable!! What is needed to get root access? Im in no position to be ale to help unfortunately as I lack the tech-knowledge! Also any ideas on the bluetooth issue?
May many many thanks!!!
How does this compare to Biffmod for you? I remember the original stock Donut was typically faster than AOSP based Donut roms, does it apply to this case?
Downloaded and flashing right now...
thelamacmdr said:
How does this compare to Biffmod for you? I remember the original stock Donut was typically faster than AOSP based Donut roms, does it apply to this case?
Click to expand...
Click to collapse
For me my friend, this is probably the best rom ever! My reasons, theres been no lag, installation was smooth and fast, not a single force close. Bluetooth and mobile data isnt working for me (is it because I am in the UK, perhaps I just need to sort out my APN.....) nor is there root yet but theyll come in time. Ive installed LauncherPro and it runs smooth as anything, I am VERY VERY pleased that I have a super fast Froyo on my G1, I am never going back!!!
PS: I personally experienced random reboots on Biffmod and other Froyo roms, none on this rom so far!
cd993 said:
For me my friend, this is probably the best rom ever! My reasons, theres been no lag, installation was smooth and fast, not a single force close. Bluetooth isnt working nor is there root yet but theyll come in time. Ive installed LauncherPro and it runs smooth as anything, I am VERY VERY pleased that I have a super fast Froyo on my G1, I am never going back!!!
Click to expand...
Click to collapse
Um.. root is working for me.. I added that to the zip (if you are in adb you will need to run 'su' then accept it on the phone.. so make sure the phone is unlocked the first time)
Sorry to be stupid, will this work with Magic 32B version? I dont care for Bluetooth at all, I care for wifi, 3g and gps.
Heading home right now to go and flash this on my G1.
feronovak said:
Sorry to be stupid, will this work with Magic 32B version? I dont care for Bluetooth at all, I care for wifi, 3g and gps.
Click to expand...
Click to collapse
Obviously, read the first post...
If I wanted to how would I go about updating to new Radio/SPL etc and use this lol ~ noob question but just making sure
XxKOLOHExX said:
If I wanted to how would I go about updating to new Radio/SPL etc and use this lol ~ noob question but just making sure
Click to expand...
Click to collapse
No new spl/radio, actually it will probably fail with the new radio.
ezterry said:
Um.. root is working for me.. I added that to the zip (if you are in adb you will need to run 'su' then accept it on the phone.. so make sure the phone is unlocked the first time)
Click to expand...
Click to collapse
Sorry yes my fault there. The problem I faced was I tried Titanium Backup but it complained of not having root and/or BusyBox. I went in to Terminal, typed SU, allowed it, downloaded BusyBox through Titanium and all is well!
Your. Are. A. Genius!!
PS: Keys arent mapped correctly e.g. the 'M' key which should give me a '>' gives me a '!'
ezterry said:
No new spl/radio, actually it will probably fail with the new radio.
Click to expand...
Click to collapse
Okie dokes thanks was just making sure
Flashed! Nice and fast, adding spanish APN...!
Information
EXPERIMENTAL ROMS FOR TESTING, NOT RECOMMENDED FOR DAILY USE!
Android 2.2.1 (Froyo) ROM for Huawei 8120 aka Vodafone 845
Based on Tas0s's CM6 Port
Android 2.2.1
Kernel 2.6.29 (Kalt Kaffe)
CyanogenMod 6.2
De-odexed
Busybox
Bash
Zipaligned
Rooted
633MHz OC kernel
JIT Enabled
Fixed Google account sync/login problem
HVGA Market v2.34
Go Launcher EX (the faster Launcher with a lot of extras)
Default mms.apk replaced with Go SMS
Default browser.apk replaced with Skyfire (you can remove)
Documents To Go v3.0002
Java ME Apps support
Only Root Explorer added for file managing (be careful)
Stopwatch app included
Working:
RIL
Audio - Volume not the best, try to fix with DSP Manager
Bluetooth
Wifi
Calibration - Recommended to use it with a pen/stick
Bugs/Not working:
Camera
SDCard mount on PC - Need to use card readed till this not fixed
Key lights
Missing aGPS
Missing FM Radio image
Ext2 filesystem on SD Card not supported
Installation
1. Flash a recovery image (tested with AmonRA and ClockworkMod too)
Method #1
2.a Copy the .zip file to your MicroSD card and boot the phone into recovery mode (call+volume-up+power)
Method #2
2.b Put device in recovery mode and start msusb and with adb or adb-windows
-----adb shell mount /sdcard/
-----adb push romFILE.zip /sdcard/
This method allways pushed properly onto sdcard no read errors
3. Choose "Flash zip from sdcard" and choose the zip you just copied.
4. Wipe data+cache before rebooting if it the first install of this ROM. When upgrading with future updates you propably won't need to wipe again.
OR
Install Superboot (via Windows PC)
Download Superboot: DOWNLOAD (MediaFire) / MIRROR (ROMraid / CoBlitz) and extract to a directory
Enter recovery mode by turning your device on while holding down 'volume down' and 'End call' (red) then powering on your device.
Note: The hourglass (zandloper) stays on the home screen
WINDOWS - double click 'superboot-windows.bat'
Phone will startup, seems to hang and eventually reboots itself.
Root the V845 (via Windows PC)
Download AmonRA Recovery 1.6.2: DOWNLOAD (MediaFire Pro) / MIRROR (CoBlitz / ROMraid) and extract the zip file
Enter recovery mode by turning your device on while holding down 'volume down' and 'End call' (red) then powering on your device.
Note: The hourglass (zandloper) stays on the home screen
WINDOWS PC - (ensure the V845 is connected via USB) double click 'install-recovery-windows.bat'
then run in cmd
fastboot-windows.exe reboot
or
Remove battery and start phone (not sure how to do this otherwise)
FIRST MAKE NAND BACKUP IN RECOVERY - Power + Volume Up + Call
WIPE RECOMMENDED!
DOWNLOAD LINKS:
FroyoBit v1.95 (CM6) - Not tested!!!
FroyoBit v1.8 (CM6)
FroyoBit v1.6.06 (AOSP)
FroyoBit 1.42 (based on Anryl's Froyo ROM R20.2)
Default Black clock color on notibar
Recommended White clock color on notibar - not tested
Original vodafone 845 ROM downloads:
Original Vodafone ROM
Original Vodafone Recovery
UPDATES:
v1.0 - Initial release
v1.42 - Last and best release on Anryl 20.2 base (bad calibration, dpad not working 2.6.32 kernel, 710MHz OC)
v1.6.06 - First & last AOSP based release (Android 2.2.2, 2.6.29 kernel, 710MHz OC, SD Card not mount on PC, No Camera, No radio, broken dialer layout, bad sensors)
v1.7 - First CM 6.2 based release, not recommended to use
v1.8
- Fixed dialer and contact list layout
- Fixed Desktopclock app layout
- Added gallery app
- Added Zeam Launcher, removed ADW
- Several app updates
v1.9
- Zeam changed to Go Launcher EX
- Mms.apk removed, added Go SMS
- Removed Advanced Task Killer (Go Launcher got built-in Task Killer)
- Added ROM Manager (Recommended to use ClockWorkMod Recovery - Attached in first post)
- Market updated to 2.34
- Removed LatinIME (built in keyboard, now you can Install and use any other what you want)
- Added Smart Keyboard Pro
- Removed CarHome
- Added Smooth Iris Theme
kuci06 said:
awesome!
I see that you are trying to integrate the honeycomb player, which would be cool, but... wouldn't that require some kind of 3D acceleration? (like the 3DGallery app, which is kinda slow on this phone)
(also, if we are talking about "honeycombing" the phone...some more honeycomb stuff that could get ported to 240*320)
honeycomb-style locksreen
honeycomb boot anim
Click to expand...
Click to collapse
Thx I will check what can I do, 3D Gallery was slower on 2.1, now much better, but not the best
Hi Bitye,
This ROM looks very promising, looks like you are integrating some great components, I will keep an eye on this and test once the screen issues and D-pad issues are resolved. In the mean time do you think you could put some screenshots or a video link up for us to have a look?
Cheers
H3pha3stus
H3pha3stus said:
Hi Bitye,
This ROM looks very promising, looks like you are integrating some great components, I will keep an eye on this and test once the screen issues and D-pad issues are resolved. In the mean time do you think you could put some screenshots or a video link up for us to have a look?
Cheers
H3pha3stus
Click to expand...
Click to collapse
i will upload some screens later, now I am at work.
Hajrá, eddig ez a legjobban működő ROM!
i can regular install this rom, and reboot after install. Then we know it comes the setup wizard. Well done, after some steps if I touch forward before setup complete, it comes an error message. After them the screen keeps black. What to do??? I think this rom is still buggy
martin_nolimit said:
i can regular install this rom, and reboot after install. Then we know it comes the setup wizard. Well done, after some steps if I touch forward before setup complete, it comes an error message. After them the screen keeps black. What to do??? I think this rom is still buggy
Click to expand...
Click to collapse
I think this will be Zeam configuration problem, I working on it will be fixed in 1.4 today. I am at work as always now, after 8:00 PM CET.
hi bitye, your roms is very fantastic, but ihave a problem, this problem is enter number on dialpad but not search in phonebook
engenek said:
hi bitye, your roms is very fantastic, but ihave a problem, this problem is enter number on dialpad but not search in phonebook
Click to expand...
Click to collapse
Ok, I will change the dialer app too.
Nice you are making a ROM too but the problem with all roms is that they all got the same bugs but tas0s said he fixed it!
i hope you will fix the bugs too...
cedric123 said:
Nice you are making a ROM too but the problem with all roms is that they all got the same bugs but tas0s said he fixed it!
i hope you will fix the bugs too...
Click to expand...
Click to collapse
I think he only fixed the wifi and finished his GIT, will check when share something, I make a quick fix for my as 1.4 than start to check the framework. I tried the final wifi fix too, but on-Phone permission changes worked for me, compiled not :S
bitye said:
I think he only fixed the wifi and finished his GIT, will check when share something, I make a quick fix for my as 1.4 than start to check the framework. I tried the final wifi fix too, but on-Phone permission changes worked for me, compiled not :S
Click to expand...
Click to collapse
Can you make a zip for fixing the permission or a guide how to do this?
cedric123 said:
Can you make a zip for fixing the permission or a guide how to do this?
Click to expand...
Click to collapse
Tas0s shared a link what have to be enought for fix I think,
http://forum.xda-developers.com/showpost.php?p=11748559&postcount=223
I tired, but start to check it If ok I will share if somebody not finish before me
1.42 released
Now I am going to try Tas0s repo, next time will release on new kernel, if camera fixable
I tried your rom, but I get the "The application Setup Wizard (process com.android.setupwizard) has stopped unexpectedly. Please try again" error that I have to press force close a few times to get rid of right after the Google sign in process. I did wipe factory reset, but it doesn't help. Have you got any idea?
Jocco said:
I tried your rom, but I get the "The application Setup Wizard (process com.android.setupwizard) has stopped unexpectedly. Please try again" error that I have to press force close a few times to get rid of right after the Google sign in process. I did wipe factory reset, but it doesn't help. Have you got any idea?
Click to expand...
Click to collapse
I haven't got problems like this, and always do full wipe and try the ROM before upload it, but I try to check that apk.
++ Installed on my friends phone w/o any problems
Szia!
Nagyon jó a romod "1.42". Wifi nek kell néha restart de jó, GPS jó , bluetooth jó, telefon jó , taskbár jó, böngészőt kellett újrarakni azóta jó.
Szerintem Király vagy.
Sorry for my bad english!
Wifi goood sometimes need restart, GPS good, Bluetooth good, taskbar good,
browser need reinstall good. This room very goood! Gratulation!!
Did I understand good,D-pad and optical butons are disabled?????
kuci06 said:
disabled, because it causes freezing
Click to expand...
Click to collapse
Will be fixed in AOSP based version