Related
so i was looking for some nice earbuds and since i listen to music on my phone a lot at work, though maybe i'd get some with a mic too. klipsch has the S4a available specifically for android (with a single button remote) and aside from that it is identical to the S4i, the 3 button apple version.
since my local bestbuy didnt carry the A's, i was searching the interwebs for success using the I's. in all my searching i found 1 post where someone confirmed the mic of the S4i worked on their android and that they were using ICS. i figured i'd take a chance on them since i had gift card and reward certs to use at bestbuy. i can confirm that the S4i's work with the sensation running ICS 4.03. the phone recognizes the mic and it does in fact work. the two volume buttons do not work (i expected this). the center button plays/pauses music and answers/hangsup phone calls all without 3rd party software. doubleclicking the center button seems to redial the last call. i would suspect that could be addressed by klipsch's app or other 3rd part apps but ive not tested them.
just wanted to post that the S4i earbuds/mic do in fact work on the sensation in case anyone else goes searching for this answer in the future.
Turbo Brian said:
so i was looking for some nice earbuds and since i listen to music on my phone a lot at work, though maybe i'd get some with a mic too. klipsch has the S4a available specifically for android (with a single button remote) and aside from that it is identical to the S4i, the 3 button apple version.
since my local bestbuy didnt carry the A's, i was searching the interwebs for success using the I's. in all my searching i found 1 post where someone confirmed the mic of the S4i worked on their android and that they were using ICS. i figured i'd take a chance on them since i had gift card and reward certs to use at bestbuy. i can confirm that the S4i's work with the sensation running ICS 4.03. the phone recognizes the mic and it does in fact work. the two volume buttons do not work (i expected this). the center button plays/pauses music and answers/hangsup phone calls all without 3rd party software. doubleclicking the center button seems to redial the last call. i would suspect that could be addressed by klipsch's app or other 3rd part apps but ive not tested them.
just wanted to post that the S4i earbuds/mic do in fact work on the sensation in case anyone else goes searching for this answer in the future.
Click to expand...
Click to collapse
I found this to work with my Sol Republic Amps HD as well. The earbuds are meant for ipods, ipads, and iphones, but work on my Senny running Virtuous Sensation 3.0 running ICS.
I took a call from my wife and she could hear me fine with the earphones, so the Amps HD is a keeper for me as well.
I just wanna clear this up but the klipsch s4i and any mic'd headphones will work for any android phone (mic and sound) but volume control/track change buttons will never work for android phones if headphones are IOS specific (and Vice-versa)
- Regular headphones have a 2-banded input plug
-Mic'd headphones and android OK 3-button headphones have a 3-banded input
-Mic'd Iphone headphones with 3-button control have a 4-banded input plug and the extra band tends to pull on your 3.5mm headphone input so be careful about pulling out/plugging in your headphones fast (if your careful and slow u will not cause any harm to your phone :] )
I mention all of this because i've heard android phones (the input plug) have the ability to utilize 4-band 3-button headsets but android software makes this impossible. So one day you may get an update and all of the buttons on your s4i(s) may work. but this is baseless speculation ive heard and I would really like to know if this is true or not also
anyways congrats on the new headphones and hope that all makes sense
good info. i only posted this because i found many ppl online saying the mic wouldnt work on their android with the s4i.
Mike9200 said:
I just wanna clear this up but the klipsch s4i and any mic'd headphones will work for any android phone (mic and sound) but volume control/track change buttons will never work for android phones if headphones are IOS specific (and Vice-versa)
- Regular headphones have a 2-banded input plug
-Mic'd headphones and android OK 3-button headphones have a 3-banded input
-Mic'd Iphone headphones with 3-button control have a 4-banded input plug and the extra band tends to pull on your 3.5mm headphone input so be careful about pulling out/plugging in your headphones fast (if your careful and slow u will not cause any harm to your phone :] )
I mention all of this because i've heard android phones (the input plug) have the ability to utilize 4-band 3-button headsets but android software makes this impossible. So one day you may get an update and all of the buttons on your s4i(s) may work. but this is baseless speculation ive heard and I would really like to know if this is true or not also
anyways congrats on the new headphones and hope that all makes sense
Click to expand...
Click to collapse
So... I have the beats urbeats headphones with a 3 button remote and 4 banded plug in my Galaxy Nexus. It works flawlessly with the back, forward, and pause buttons all working properly.
just sayin
Playing with the EQ And mine sound amazing.
The right channel is the only one that works with any pair of 3.5mm speakers/headphones, i have not tested bluetooth.
The internal speaker plays both channels fine, but with speakers/headphones there is just a VERY faint buzzing/humming in the left one.
Tested Sennheiser CX475, Logitech X-240, JVC Marshmallow, older altec lansing and harmon kardon PC speakers, all with the same result. All of them work as intended when connected to another source.
Running stock 2.3.6 with k0nane's rooted kernel and shabbypenguin's CWM
Not sure if this is a HW or SW problem but i bought the phone on saturday 4/28 so i still have until the 12th for a T-Mo store replacement exchange.
Update: Sound is fine over bluetooth, so it's probably not a software problem, guess i'll just trek to the T-Mobile store again.
This may sound stupid, but do you have the jack plugged all the way in? I had a car aux cable plugged in a couple of times with this phone when it would sort of work, but was not clicked in all the way.
May not be your problem, but it's an easy thing to check.
Yeah, I'd agree. It seems like Samsung headphone jacks are "tighter" than what a lot of other devices are. My samsung hs3000 headphone adapter and the headphone jack on the phone itself, are both much "tighter" than my sony mw600 jack.
Yeah, I know what you're thinking!
Just saying that it's pretty easy to think you're plugging in the headphone plug all the way on some jacks, when really you're not.
jenbek said:
The right channel is the only one that works with any pair of 3.5mm speakers/headphones, i have not tested bluetooth.
The internal speaker plays both channels fine, but with speakers/headphones there is just a VERY faint buzzing/humming in the left one.
Tested Sennheiser CX475, Logitech X-240, JVC Marshmallow, older altec lansing and harmon kardon PC speakers, all with the same result. All of them work as intended when connected to another source.
Running stock 2.3.6 with k0nane's rooted kernel and shabbypenguin's CWM
Not sure if this is a HW or SW problem but i bought the phone on saturday 4/28 so i still have until the 12th for a T-Mo store replacement exchange.
Update: Sound is fine over bluetooth, so it's probably not a software problem, guess i'll just trek to the T-Mobile store again.
Click to expand...
Click to collapse
Go to settings/Accessibility and uncheck MONO ;-) This feature is for listening to one earpiece (Wired)
Hey XDA, I have a question about my headphone jack on my HTC One X+ (ATT Carrier, Rooted w/ Custom Rom)
NOTE: This is not life or death - but may be interesting for some developers...
I've been using the headphones and their "beats audio" for quite sometime (4 weeks).
Randomly, the headphone jack cut out and stopped working with my mic enabled headphones.
-->The headphones worked on other music devices.
Tried another pair of mic enabled headphones
--> They worked!
Tried another pair of non mic enabled headphones
--> DIDN'T WORK!
Tried my pair of mic enabled headphones
--> Still didn't work...
Tried the same model (as mine) of mic enabled headphones
--> Worked...
So, I went about factor resetting my phone, trying a few different roms, and all that jazz. No success with my headphones (which work on my brother's HTC One X+) Here's another weird thing, using my beats studios I switched cable direction and they worked. Thinking this may have been a 'headphone' issue. I used a micrometer and measured all of the jack inputs... they are basically identical (Mic enabled differing from non mic of course).
My guess is that my phone software isn't recognizing some of the headphones for some reason.
It's not a huge deal as I have a few pairs that work fine with it and can always use SoundAbout if I really want to force audio through my pair.
Anyway, if anybody has an idea as to what's going on - let me know!
If you are having HTC Headphone/Jack/Beats problems:
--> download SoundAbout from the PlayStore and you can force your headphone jack to work.
--> try different headphones, different models, and mic'd or non mic'd pairs
--> Flash and reset your phone... may be software
--> Take it to a phone tech or get it replaced :good:
Best of luck.
Did you mean to post this in the One X+ area?
I just received my Tronsmart TS7 Glacier from Geekbuying. The phone is a nice HTC One lookalike with some awesome features including a long life 2200 mah battery, MTK6589 Quad Core processor, 1 GB RAM and a crystal clear screen. It is extremely well built and feels both heavy and solidi the hand. The included cover is rubbish, though it is free in the package so I'm not going to complain. Bluetooth supports A2DP, which works well with my Bluetooth stereo. The bottom menu, home and back keys are capacitive and illuminated - though they are so dim, that they could have avoided backlighting them altogether.The device was easy enough to root, so all in all great value. Make sure you ask for a discount for the phone, after initiating live chat on Geekbuying. I am not affiliated to them.
Oddly enough, the package had the IMEI stickers in the box, which said Cubot One. They look visually identical and I wanted to check if they are infact the same pieces, for firmware support. Can anyone confirm this please?
The supplied headset is rubbish, so I used a BlackBerry and an iPhone "headset" (Headphones with a built in mic and that has 4 contacts on the end of the 3.5mm jack) and used it with the phone. Unfortunately the headset is detected as a headphone only (i.e. With no mic; You see this on an icon near the Wifi signal) - spitting out terrible muffled sounds, unless I press and hold the (Call / End) button on the cord. The second I let go of the button, the sound returns to a terrible state.
If I plug in regular headphones, without a mic, I'm fine, but I have this problem with headsets (Again - headphones with a built in mic with call / end button) used with the TS7.Do any of you have a similar issue? I'm worried I got a half lemon. It's really bothering me. Can this be fixed by software?
Would love to hear back from you. on whether this is a common problem, or one only with my set.
P.S. The rubbish supplied headset is detected / works fine - But they sound TERRIBLE! The supplied headset also works well with my Blackberry 9790 - but my Blackberry headset does not work well with the TS7. Any thoughts? Do I need a special headset?
Thanks in advance,
GP = Dubai
Bump...
Anyone!?
g_patkar said:
I just received my Tronsmart TS7 Glacier from Geekbuying. The phone is a nice HTC One lookalike with some awesome features including a long life 2200 mah battery, MTK6589 Quad Core processor, 1 GB RAM and a crystal clear screen. It is extremely well built and feels both heavy and solidi the hand. The included cover is rubbish, though it is free in the package so I'm not going to complain. Bluetooth supports A2DP, which works well with my Bluetooth stereo. The bottom menu, home and back keys are capacitive and illuminated - though they are so dim, that they could have avoided backlighting them altogether.The device was easy enough to root, so all in all great value. Make sure you ask for a discount for the phone, after initiating live chat on Geekbuying. I am not affiliated to them.
Oddly enough, the package had the IMEI stickers in the box, which said Cubot One. They look visually identical and I wanted to check if they are infact the same pieces, for firmware support. Can anyone confirm this please?
The supplied headset is rubbish, so I used a BlackBerry and an iPhone "headset" (Headphones with a built in mic and that has 4 contacts on the end of the 3.5mm jack) and used it with the phone. Unfortunately the headset is detected as a headphone only (i.e. With no mic; You see this on an icon near the Wifi signal) - spitting out terrible muffled sounds, unless I press and hold the (Call / End) button on the cord. The second I let go of the button, the sound returns to a terrible state.
If I plug in regular headphones, without a mic, I'm fine, but I have this problem with headsets (Again - headphones with a built in mic with call / end button) used with the TS7.Do any of you have a similar issue? I'm worried I got a half lemon. It's really bothering me. Can this be fixed by software?
Would love to hear back from you. on whether this is a common problem, or one only with my set.
P.S. The rubbish supplied headset is detected / works fine - But they sound TERRIBLE! The supplied headset also works well with my Blackberry 9790 - but my Blackberry headset does not work well with the TS7. Any thoughts? Do I need a special headset?
Thanks in advance,
GP = Dubai
Click to expand...
Click to collapse
there are several kinds of headset with MIC. IPHONE'S can not work with chinese phone. NOKIA'S works
g_patkar said:
Bump...
Anyone!?
Click to expand...
Click to collapse
Hi, I have the Cubot One, and have exact the same problem. The rubbish boxed white earphone works, but any of my Sennheisers wont. I think it has something to do with the TRRS standards but I have no fix yet. Have you solved it already??
I have the same problem!
g_patkar said:
Bump...
Anyone!?
Click to expand...
Click to collapse
I have the same problem man, and I was wondering If I'm the only one!!!
I tried with sony ericsson headphones...
And I have an additional problem.. when I connect my phone to my pc speakers or my amplifier and the big speakers, It pauses the music, disconnects and connects again to the cable... Every time I press play it does the same!
And another thing that I couldn't figure out with this phone is that when I go to install a big game it tries to install the sd data to phone's storage,
and says that I don't have enought free space... Even though from starage setting I have set both those settings to SD card!!!
alexander703806 said:
I have the same problem man, and I was wondering If I'm the only one!!!
I tried with sony ericsson headphones...
And I have an additional problem.. when I connect my phone to my pc speakers or my amplifier and the big speakers, It pauses the music, disconnects and connects again to the cable... Every time I press play it does the same!
And another thing that I couldn't figure out with this phone is that when I go to install a big game it tries to install the sd data to phone's storage,
and says that I don't have enought free space... Even though from starage setting I have set both those settings to SD card!!!
Click to expand...
Click to collapse
I fount this topic because and I have that problem and do just what you say. I got my phone few days ago.
I try one my in-ear headphones and have terrible sound, then I try speakers from the computer, and when I press play, it let sound for 1 sec and stop immediately. My first conclusion was that perhaps it has a weak sound output on jack, or headphones and speakers have too much ohms resistance.
II hope you will find some solution.
For the memory, try replacing the internal memory to the memory card using this procedure (put link in google translator to translate in english): http://www.htcmania.com/showthread.php?t=616319
Hi there. I do not have the pausing problem, but I can now listen to any headphones / headsets with an adapter I bought from eBay.
Seach for "iphone to nokia adapter" on Ebay. It should cost between $2.50 to $3.00.
Hope it helps - I am enjoying all my headsets with the TS7 now (Blackberry, iphone, beats etc).
Do any of you know if there are any firmware updates for this phone?
Thanks...
g_patkar said:
Hi there. I do not have the pausing problem, but I can now listen to any headphones / headsets with an adapter I bought from eBay.
Seach for "iphone to nokia adapter" on Ebay. It should cost between $2.50 to $3.00.
Hope it helps - I am enjoying all my headsets with the TS7 now (Blackberry, iphone, beats etc).
Do any of you know if there are any firmware updates for this phone?
Thanks...
Click to expand...
Click to collapse
I can confirm it works. I just got a cable that I ordered 14.4. for headphones. Now the sound is normal (no more like to play in a barrel), and recognizes the headset with a microphone (in the taskbar near the clock displays the headset with a microphone, before was just headphone icon). But I still can not play music through the speakers of the computer. Immediately after press play, the song stops and disconnect the speakers. Probably they have too much resistance or something that can not "push" sound.
Oh, and here's a link cable: http://www.ebay.com/itm/22132695223...arms=gh1g=I221326952237.N19.S2.M-34513.R2.TR2
Hi all, I got a Moto G 8gb from Phones4U, and my Bose QC15 noise canceling headphones made a nasty clicking noise every time they were plugged in. The clicking would happen no matter if something was playing or not. Nothing would play out of either channel, and the software would randomly pause whenever they were plugged in, as if they were being unplugged. Various cheap earbuds worked, but not my QC15s. I factory reset it three times, and obviously tried the headphones on about a half dozen devices, including a Galaxy IV, iPhone 5C, Nexus 5, my laptop, my desktop, and an old iPod Classic -- all worked perfectly.
I took it to Phones4U and exchanged it for another model, which had the exact same problem. We tried a 16gb version and it had the exact same problem too. Then we tried it with various other phones and my QC15s worked, so they told me that my headphones must obviously not be compatible with the Moto G line. Then they said I wasn't even eligible for a refund because it was about compatibility, not a defect. I raised hell and finally got them to refund it, but now I don't know what to do. Anybody else have noise canceling headphones, especially the QC15s, that they have successfully or unsuccessfully used?
staeiou said:
Hi all, I got a Moto G 8gb from Phones4U, and my Bose QC15 noise canceling headphones made a nasty clicking noise every time they were plugged in. The clicking would happen no matter if something was playing or not. Nothing would play out of either channel, and the software would randomly pause whenever they were plugged in, as if they were being unplugged. Various cheap earbuds worked, but not my QC15s. I factory reset it three times, and obviously tried the headphones on about a half dozen devices, including a Galaxy IV, iPhone 5C, Nexus 5, my laptop, my desktop, and an old iPod Classic -- all worked perfectly.
I took it to Phones4U and exchanged it for another model, which had the exact same problem. We tried a 16gb version and it had the exact same problem too. Then we tried it with various other phones and my QC15s worked, so they told me that my headphones must obviously not be compatible with the Moto G line. Then they said I wasn't even eligible for a refund because it was about compatibility, not a defect. I raised hell and finally got them to refund it, but now I don't know what to do. Anybody else have noise canceling headphones, especially the QC15s, that they have successfully or unsuccessfully used?
Click to expand...
Click to collapse
You were probably a bit hasty returning the phone just for this, but you're right there's something screwy about the Moto G's handling of wired earphones that are more complex than basic stereo. I can't get any 3-button remote headset to work with it properly, for example. No doubt Motorola will deal with this in future updates ... unless they only want us to buy the Sol Republic Jax earphones, which would not be good ...
I'm also surprised you got a refund, as Motorola doesnt claim compatability with your headset. Also surprised that Phones4U now have 16GB in stock
ghtop said:
You were probably a bit hasty returning the phone just for this, but you're right there's something screwy about the Moto G's handling of wired earphones that are more complex than basic stereo. I can't get any 3-button remote headset to work with it properly, for example. No doubt Motorola will deal with this in future updates ... unless they only want us to buy the Sol Republic Jax earphones, which would not be good ...
I'm also surprised you got a refund, as Motorola doesnt claim compatability with your headset. Also surprised that Phones4U now have 16GB in stock
Click to expand...
Click to collapse
Just for the record I have a 16gb Colors edition from Brazil and I use a Sennheiser bluetooth headphone with my Moto G (PX 210 BT) and it works beautifully!
I can use all its buttons with no problem: play/pause, volume up and down and skip track forward/backward.
One interesting thing I noticed was: the headphone did not perform very well with Google Play Music. Both sound quality (it would constantly click during playback) and the buttons (play/pause button would only work with screen on) were not up to standard.
However when I installed my player of preference, PlayerPro, and messed a little bit in the settings of the app with audio priority and with the keyguard settings both audio quality and buttons were working great!
shd_cheap_cigar said:
Just for the record I have a 16gb Colors edition from Brazil and I use a Sennheiser bluetooth headphone with my Moto G (PX 210 BT) and it works beautifully! e
I can use all its buttons with no problem: play/pause, volume up and down and skip track forward/backward.
One interesting thing I noticed was: the headphone did not perform very well with GooglPlay Music. Both sound quality (it would constantly click during playback) and the buttons (play/pause button would only work with screen on) were not up to standard.
However when I installed my player of preference, PlayerPro, and messed a little bit in the settings of the app with audio priority and with the keyguard settings both audio quality and buttons were working great!
Click to expand...
Click to collapse
Yes, bluetooth is another matter of course. But I guess he has a reason to be sore when those wired Bose QC15 headphones cost twice as much as the phone itself
Workaround to make them work
I have the same problem connecting my QC15 with moto G. With some experimenting I somehow made them work and they are perfectly fine now. Follow the below steps to make them work with your phone.
1. Disconnect the headphones to the phone and start music on any player(Google play or your choice) on the phone.
2. Once the song starts playing insert the headphones into the jack. Imp Note: remove the headset part from the wire.you should only insert the wire without having the headset piece.
3. Now the song will continue to play. Now switch on the headphone and insert the wire into the headphone. It should work now.
I know this shouldn't be the actual scenario, but engineers at Motorola have made up some mess which cannot be cleaned up now with respects to hardware. The phone is little wierd on headphones port. Its not working with aux cables in my car too
I have SMS street by 50 cent and every thing works fine. skip/pause and previous track
Sent from my XT1032 using xda app-developers app
Same problem
I've experienced the same problem with Bose QC15 and the Moto G. Motorola support were rude and unhelpful, first assuming that the QC15 were bluetooth and telling me flat out that it was not a fault of their hardware. Eventually I got a ticket raised so we'll see what happens. Not holding my breath.
bonthukarthik, your fix works - thank you for sharing - although I must add that this step has to be repeated whenever playback is stopped or paused (including when Spotify plays an advertisement). If I find anything out from Motorola, I will share it here.
I just got some qc15's and they only worked out of the left ear with the moto x. I used the work around above and they now work. weird. play/pause button now works but the volume does not on the inline headphone controls.
What kind of connector this headset/headphone has?
CTIA or OMTP?
I have skullcandy 2xl single button headphones and it doesn't work
when i attach the headphones the music pauses
Confirmed
I can confirm this issue with Moto X and also the workaround. I have contacted Motorola but so far no luck in getting through to someone who can open an issue internally
Skullcandy not working
Have the same problem
I have the skull candy inkd 2
It only works when its 3/4 inside but when I push it all the way in a clicking noise plays
Please find a solution
Hi.
I just got a moto g, I have a bose qc3 and the same problem.
It seemed tome that it seemed to me that it was connection or impedance related... so I tried a few things.
The best way I found to make it work fast is plugging it in using the airplane jack adapter. It works perfectly fine but the remote won't work.
I guessed that it means that it's remote/impedance related.
Like it was said before, unplugging the jack on your headset, playing something on the phone and plugging it it afterwards works too... But I really don't know why !
Any clues, anyone (with advances electronic skills)?
With my former android phones I had troubles using the answer/play remote on some headphones/buds, but never like that. It was allways clear to me that iphone and android headset/buds remotes work in a different way, and sometimes even differently depending on your android model or brand...
My guess is that using a cable without a remote will work... but it's be nicer to have a working remote.
---------- Post added at 10:18 AM ---------- Previous post was at 10:08 AM ----------
I found something, just a clue, I don't mean it'll work for sure.
http://m.instructables.com/id/Galaxy-Nexus-and-others-headset-remote-with-medi/
Alright here are some more details / partial solutions :
- If you plug your qc using the jack with the remote/mic and the airplane adpter, the sound sill work, but you'll lose the mic and commands. Basically it's the same as if you plugged it in usgin a "regular" jack cable (that bose sells, or used to, btw)
- if you use the "play and then plug jack in headset" workaround, sound will work, the main button too : it'll play/pause, but if you stop and quit tha music app, the problem will come back
- almost the same with a call, if you call your phone and wait for it to ring before pluging the jack into your hedset the sound will work both sound and mic, but the button fonctions are weird : at first it'll aswer the call, but afterwards it'll work as an on/off switch for the mic.
- Best solution I found : when you plug your headset and have the parasite problem, just press the main button on your remote, it'll stop the problem... but the button won't work anymore, either to answer/hangup or play/pause. I use this solution ftm, even if I don't think it's good for the headset to have this clicking parasite, and I'm still waiting on a way to make everything work all the time.
Any ideas ?
Mat
Matlevo12 said:
Any ideas ?
Mat
Click to expand...
Click to collapse
Have you tried with a CTIA to OMTP converter .
Hi, thanks.
No, i should, but I thought that all android phones were ctia now... I don't have my moto handless kit with me, but I'll try it with my gf's xperia sp to see if it works with it, since my bose headset works perfectly with the xperia.
Anyone knows if the moto g is ctia ?
Any other ideas ?
dunsanyun1999 said:
Have the same problem
I have the skull candy inkd 2
It only works when its 3/4 inside but when I push it all the way in a clicking noise plays
Please find a solution
Click to expand...
Click to collapse
All Stereo Head phones normally use a 3 Pin Jack, Cell phones use a 4 pin, I found this out before with some other audio products..
I confirm all the informations about the problem and the workaround concerning a Moto X and the QC15 I just got. I hope a solution will be found. Does anybody tried that amazon product ?
[email protected] said:
I confirm all the informations about the problem and the workaround concerning a Moto X and the QC15 I just got. I hope a solution will be found. Does anybody tried that amazon product ?
Click to expand...
Click to collapse
I have a Droid Maxx and the QC15. The android inline remote & mic kit from Amazon have the same problem as the iphone cable that comes with the QC15 headphones. Quite annoying. Also, I can't get the workaround to work. No matter what I do, I only get sound from the left speaker.
I had a similar problem (no audio, weird noise in right ear) with Moto-G and QC15. The workaround that succeeded for me was to change the headphone gain from Hi to Lo. The gain switch is in the plug that connects the wire to the left earcup.
This supports the suggestion that the issue is caused by some impedance measurement routine on the phone.
J