On the triple boot solution of racks I installed the NookieJoy Os.
Before installing I formatted system 1 and data 1 and the cache.
After installing I can not go back to the original Nook OS.
The Nook OS is replaced by the JoyOS. (thisis now Internal eMMC normal)
Can I get back my Nook OS and get rid of the Joy OS.
Related
While trying to flash a new ROM I think I may have unplugged the USB cable with the tablet still mounted to a laptop. I now can't seem to access that storage space in any way and am in turn unable to flash any ROM. I don't like the TnT and am trying to flash a ROM without it. Any ideas how to proceed?
Thanks in advance!
does it boot up at least? may be able to factory reset and start over. or even power+VOLUMEUP to try to recovery boot.
i just put on tntlite 2.0. it's super fast. doesn't use a computer. it just strips the stock OS
It does still boot but tablet storage is not accessible. When trying to get into recovery,i get a triangle then it boots normal. Not sure what else to try. Tried mounting in windows and linux to format our repair..no luck!
sounds like the storage partition is corrupted and it crashes when it tries to read it, expecially if you unplugged the cable mid-flash (ouch!)
clockwork mod should let you reformat and partition the internal storage, goodluck, hopefully it's not a low-level problem w/ the storage data structure, ya never know if you were flashing it when it crashed, depends on what mode it was using to flash data to the disk (normal write vs low-level format equiv)
Thanks KM....just to follow up on this thread...I had to return the tab to sears....I exchanged it for a new one and have put TnT lite 2.0 on it. I'm not all that happy and plan to try zpad as it seems like a smoother and faster responding ROM.
I am running clockworldmod and am trying to format the system and data. System formats fine, but when I format data it gives me an error. I recently ran manualnooter but had not discovered the cyanogenmod. I want to get the cyanogenmod running on my nook color, but I cannot get the memory cleared to do so. HELP?!?!?!?!
Has anybody managed to dual boot android with Ubuntu touch on there tab 2 ?
I tried this using blackhawk kernel but had no luck. I would like to be able to test Ubuntu previews without deleting my android os every time
Also I would like it to install to the internal sd not an external one as this ruins performance.
Thanks for any feed back.
Hello,
I'm a n00b here, don't hate. So basically, I want to make a bootable SD card for my Nook Hd Plus.
I followed the steps on http://forum.xda-developers.com/showthread.php?p=36421852#post36421852 (but instead I used http://forum.xda-developers.com/showthread.php?t=2389813 and the latest zip from that site so I could get Android 4.3)
So I burned cwm 7.1 on the sd, booted the Nook up, installed the latest zip file from http://forum.xda-developers.com/showthread.php?t=2389813 (This zip I put on the Nook Internal storage, like the steps said)
I click Reboot system, and it goes straight back into cwm.
I fully turned off the device, took card out, THEN booted it up again, but this time it showed the first black Nook screen for about 2 seconds, then showed the cwm boot up screen, the the cynagenmod boot up sequence pops up (THIS WASD WITH THE CARD OUT!)
From cwm, I can see that the internal storage was NOT formatted (thankfully), but no matter what, i can't seem to get it to boot up from ANYTHING (stock rom or sd).
Plugging it into my Windows PC, nothing showes up (but it does recognize it, just no way to view the files inside the internal storage)
PLEASE HELP ME OUT ASAP, I really hope I did not brick my device
Ok heres the story (its not too long don't worry)-
But I URGENTLY need help to fix it please please.
I have an LG GT 540.
I got it 2months ago, and it came as factory standard, and on LG's android 1.6 operating system (so unusable basically).
Over the 2months I managed to upgrade it to a Cyanogen 4.2.1 custom rom, managed to learn how to partition my SD card into fat32 & ext2 and then installed Mounts2sd and used it to freeup space on phone.
(The phone comes with only 138mb storage, so is unusable without mounts2sd quite simply).
The phone was constantly freezingup everytime I tried to load any app ever,
but after clicking the 'Fix Permissions' tab in the recovery menu, it was all working fine and everything was working fine.
HOWEVER as 1 thing wasn't working on an app I love, and re-installing the app didn't fix the issue, I decided to wipe the whole phone, reinstall the ROM and try re-installing the app then.
But when trying to clear and wipe everything from the phone, in addition to clicking data wipe/cache wipe/dalvik cache wipe, I also clicked on the buttons saying ''Format system / Format SDcard / Format sd-ext''.
When I tried to reboot phone it was bricked, as had no boot screen logo, just was plain dark screen.
I fixed this by removing sd card from phone, putting it into laptop, placing the Cyanogen 4.2.1 rom file directly onto the sdcard, placing sd back into phone, rebooting into recovery menu, and then re-installing the ROM from the sd card.
However I now have a massive issue in that whilst the phone will now work without Mounts2sd installed (well it works but I cant install any apps as no space to do that),
As soon as I install Mounts2sd on the phone and try to use it, whilst it does freeup the memory its meant to, it totally mucksup the entire phone by making every app freeze, making phone not turn off straight away when clicked to... ect
I have removed sdcard, re-partitioned it on my laptop into Fat32 & Ext2, re-installed the ROM multiple times, and then re-installed mounts2sd on the fresh rom and tried to use it,
But everytime I try it just screwsup the phone and makes all the apps and everything on the phone freeze!!
Ive now wiped all data/cache/dalvik,
re-flashed that cyanogen rom onto the phone again (mustve done that 50x now in last 2months),
and am about to try formatting the sd card again on my laptop, then re-partitioning it to Fat32 & Ext2.
But before I re-install Mounts2sd and get the exact same issue all over again,
please please can someone tell me how I can fix this or what im doing wrong??
And so how exactly I can install Mounts2sd back onto my phone again, but without it messingup the whole phone and making everything on it freeze?
Thankyou soooo much inadvance