Database Info

[Q] any1 knw hw to fix dalvik-cache mv 2 sd in creedsv2

hey guys i am new i really want to know if some one can fix r there's way to fix problem i.e
in creeds rom v2 dalvik-cache move to sd dont work i m stuck on boot loop for hours n i need a solution as in v1.7.2 i had 125 apps now i cant even install 50 of them....plz help.

maybe there's no ext4 partition?

no coz in v1.7.2 i made partition and of 512mb and moved dalvik-cache to sd and 64mb swap but a2sd is working well in v2 jus the move to sd function is not working as described by mr.creedo himself in the thread...n m still using v1.7.2 with sd-ext...
i think its coz of either rom or the kernel coz v2 is based on cmptly new firmware but in v.1.7.2 it is giving no such problem.

try link2sd...

Dalvik cache to sd is not working for now.Even i tried to do so but it din't work and i had to reflash. May be creed will come up with a solution

i have been studying android in deep and i think these steps might help via link2sd
and FAT2 partition
http://forum.xda-developers.com/showthread.php?t=919326
i will try and let you guyz know if its of any use...!!

arhant said:
i have been studying android in deep and i think these steps might help via link2sd
and FAT2 partition
http://forum.xda-developers.com/showthread.php?t=919326
i will try and let you guyz know if its of any use...!!
Click to expand...
Click to collapse
lol, I already told use link2sd...works for me in every rom so far...even cm9...
but its a good thing that you tried to research a little...keep it up...

a.cid said:
lol, I already told use link2sd...works for me in every rom so far...even cm9...
but its a good thing that you tried to research a little...keep it up...
Click to expand...
Click to collapse
hey its wierd..i made a secondary FAT32 partition using minitools and then flash v2 n try to link my secondary drive but wenever i choose fat32 its shows error then i noticed that this rom automatically changes fat32 to ext3 wenever i insert sd card though i was able to mount my ext3 using link2sd but wen i link dalvik-cache it shows no dalvik-cache..!!
how's dat possible....is it something wrong with rom??
thnx anyway

i was searching a more n i found this thread
http://forum.xda-developers.com/showthread.php?t=1042828
data2sd but it is under development...btw it can be use if made for fit..

arhant said:
i was searching a more n i found this thread
http://forum.xda-developers.com/showthread.php?t=1042828
data2sd but it is under development...btw it can be use if made for fit..
Click to expand...
Click to collapse
ya that is ungaze script...already implemented in cm7.2 rc5.5 by asad007
I haven't tried partition tool...I partitioned via cwm...
and your secondary partition should be ext2/3, not fat32...

I partitioned ext 4 via windows. Putted ungaze script. Working . Same benchmark as without script. I am on rc 5,5
Sent from my GT-S5670 using Tapatalk

djozaa said:
I partitioned ext 4 via windows. Putted ungaze script. Working . Same benchmark as without script. I am on rc 5,5
Sent from my GT-S5670 using Tapatalk
Click to expand...
Click to collapse
will this move dalvik-cache to sd...if yes
plz give me download link!!!thnx

a.cid said:
ya that is ungaze script...already implemented in cm7.2 rc5.5 by asad007
I haven't tried partition tool...I partitioned via cwm...
and your secondary partition should be ext2/3, not fat32...
Click to expand...
Click to collapse
hey will this method work in any rom r jus in cm7.2 rc5.5....n will this move dalvik-cache to sd....
\?

http://forum.xda-developers.com/showthread.php?t=1042828
Please read instructions and do backup before
Sent from my GT-S5670 using Tapatalk

arhant said:
will this move dalvik-cache to sd...if yes
plz give me download link!!!thnx
Click to expand...
Click to collapse
Yes. Post above is link
Sent from my GT-S5670 using Tapatalk

djozaa said:
http://forum.xda-developers.com/showthread.php?t=1042828
Please read instructions and do backup before
Sent from my GT-S5670 using Tapatalk
Click to expand...
Click to collapse
Het guys please becarefull about the partition thing..
Because its very risky and you better have backup of your sdcard ane save that backups at your PC or notebook..
Some of my friends has been loosing all of his data because of it.

When u first time partitioning sd card, it will remove all your sd card stuff ofcourse. Just put it on desktop and move back when partition is done.
Sent from my GT-S5670 using Tapatalk

a.cid said:
try link2sd...
Click to expand...
Click to collapse
hey thnx ..it wrks n i have 134mb free...

Enter Recovery Mode by holding POWER + HOME;
With the Volume Down key (-) and High Volume (+) and navigate to the HOME key Select "advanced";
Select "partition SD Card"
In the next window you should choose the partition size.
If you have a 2GB card to advise you put 512mb 1024mb,
If you have a card with 4GB or 8GB advise putting 2048mb.
And finally select the size of the swap partition for extra memory.
If you have an urge to put 2gb card 128mb,
If you have a card with 4GB or 8GB advise putting 256mb.
enter the Market and install the program Links2SD
to open the program you should choose ext3 and press ok> then superuser permission> and after that restart your phone.
Now press the Options button to display the sub-menu of the program
Made this to take and check the settings, and automatically link-site check in'' automatically''.
Now press the Options button to display the sub-menu of the program.
Made this to take and check the settings, and automatically link-site check in'' automatically''.
Return to initial screen of the program, press the Options button to display the sub-menu and then click multiple selection, press the shutter button and select options select all, press again press the options button and click Actions, and click Create link. Press OK to start, and all your applications ready to go to memory that was created ext3.
Now we will install and configure the Swapper. Lower application, install the application by the Market, after check the Active on Boot Swap on Swap File Position sure "EXT Partition SD Card" in "Swap File Size" set a value as the size of the partition created in ext, I suggest that is a partition of 1024 put 250 if a partition of 2048 put 512 of superuser permissions and restart the phone.

And finally select the size of the swap partition for extra memory.
If you have an urge to put 2gb card 128mb,
If you have a card with 4GB or 8GB advise putting 256mb.
Now we will install and configure the Swapper. Lower application, install the application by the Market, after check the Active on Boot Swap on Swap File Position sure "EXT Partition SD Card" in "Swap File Size" set a value as the size of the partition created in ext, I suggest that is a partition of 1024 put 250 if a partition of 2048 put 512 of superuser permissions and restart the phone.
Click to expand...
Click to collapse
I wouldn't recommend swapper...
long story short, it'll start affecting performance...and do more bad than good...
swap partition is basically virtual ram...but the problem with this is, our phones ram is fast, while even the best of sd cards can't match that...
so you may get better performance initially, but soon you'll regret having a swap partition...

[Q] sd-ext Mounting problem in galaxy fit

HELP!!!! Link2SD not mounting Sd-ext partition
every time while opening this app it asks for type of partition I'm using and then asks for reboot
I chose ext3 as I'm using teejay's CWM
I even check the type of partition using Minitool and it says ext3 and primary
why Link2Sd not mounting sd-ext then?? plz Help
I'm using chocobread 3.2
And as it already has S2E so before doing all this I had uninstalled S2E using root explorer method.
I selected 512mb size
swap size= 0mb
I'm using verbatim class 4 sd card(4 GB)
I followed these steps to partition SD card and Setting up Link2SD by A.cid given in thread
http://forum.xda-developers.com/showthread.php?p=27132543#post27132543
Q) How to create a sd partition?
A) You will need
• A good micro sd-card, with a class greater than 4
(the class is usually printed on the card itself, it’s the number inside the letter ‘C’)
• A rooted galaxy fit running android 2.3.x (preferably on a stock rom), with ClockworkMod recovery
Steps:
• Backup all your data.
• Reboot into CWM.
• Go under “advanced”>”partition sd card”.
• Select the size of your second partition (On my first try, I made a partition of 1024MB but found it too big with a lot of space unused, so I deleted the partition and made a new one of 512MB)
This is your choice, choose one depending on the total size of your card, the no. of apps/games you’ll have etc.
• After selecting that, select swap size as 0MB (This one also is your choice, but I’ll explain why to take 0MB, and not anything else)
• Now wait till the process is completed, and reboot.
As far as I know, CWM v5 makes a partition of EXT3 format.
Q) Why to select swap size as 0MB?
A) Swap partition is made with the objective of utilizing it as VIRTUAL RAM. Now this may sound as a good thing, but in reality the ram in our fit is way faster than the average class 10 micro sd-card. So, instead of speeding up your system, it will slow down your system horribly after a certain point.
So, in short, you shouldn’t be using a swap partition, hence there is no point in creating one if you are not utilizing it.
Steps to setup Link2sd:
• Download Link2sd from Play Store (it’s a free app).
• After it gets installed, run it, and allow root access.
• You will get a message to select the format of your sd partition, select “ext3”.
• Link2sd will then automatically create mount scripts that it requires to work, and will then tell you to reboot your phone.
• Do a proper reboot, and not a ‘hot reboot’.
• After rebooting, open up Link2sd, press menu then select “settings”.
• Select/check the options “automatically link newly installed applications to sd”, “auto link notification”, “relink lib files at boot” (and “fast scroll”, if you want).
• For “install location” option, select “internal”.
• Then go to “auto link settings” and select/check all the three options (you can skip/ unselect “link dalvik-cache file” if you wish)
• Done
Now, every new app that you will install will automatically be moved to your sd ext partition.[/INDENT]

Nikhil_G said:
HELP!!!! Link2SD not mounting Sd-ext partition
every time while opening this app it asks for type of partition I'm using and then asks for reboot
I chose ext3 as I'm using teejay's CWM
I even check the type of partition using Minitool and it says ext3 and primary
why Link2Sd not mounting sd-ext then?? plz Help
I'm using chocobread 3.2
And as it already has S2E so before doing all this I had uninstalled S2E using root explorer method.
I selected 512mb size
swap size= 0mb
I'm using verbatim class 4 sd card(4 GB)
I followed these steps to partition SD card and Setting up Link2SD by A.cid given in thread
http://forum.xda-developers.com/showthread.php?p=27132543#post27132543
Q) How to create a sd partition?
A) You will need
• A good micro sd-card, with a class greater than 4
(the class is usually printed on the card itself, it’s the number inside the letter ‘C’)
• A rooted galaxy fit running android 2.3.x (preferably on a stock rom), with ClockworkMod recovery
Steps:
• Backup all your data.
• Reboot into CWM.
• Go under “advanced”>”partition sd card”.
• Select the size of your second partition (On my first try, I made a partition of 1024MB but found it too big with a lot of space unused, so I deleted the partition and made a new one of 512MB)
This is your choice, choose one depending on the total size of your card, the no. of apps/games you’ll have etc.
• After selecting that, select swap size as 0MB (This one also is your choice, but I’ll explain why to take 0MB, and not anything else)
• Now wait till the process is completed, and reboot.
As far as I know, CWM v5 makes a partition of EXT3 format.
Q) Why to select swap size as 0MB?
A) Swap partition is made with the objective of utilizing it as VIRTUAL RAM. Now this may sound as a good thing, but in reality the ram in our fit is way faster than the average class 10 micro sd-card. So, instead of speeding up your system, it will slow down your system horribly after a certain point.
So, in short, you shouldn’t be using a swap partition, hence there is no point in creating one if you are not utilizing it.
Steps to setup Link2sd:
• Download Link2sd from Play Store (it’s a free app).
• After it gets installed, run it, and allow root access.
• You will get a message to select the format of your sd partition, select “ext3”.
• Link2sd will then automatically create mount scripts that it requires to work, and will then tell you to reboot your phone.
• Do a proper reboot, and not a ‘hot reboot’.
• After rebooting, open up Link2sd, press menu then select “settings”.
• Select/check the options “automatically link newly installed applications to sd”, “auto link notification”, “relink lib files at boot” (and “fast scroll”, if you want).
• For “install location” option, select “internal”.
• Then go to “auto link settings” and select/check all the three options (you can skip/ unselect “link dalvik-cache file” if you wish)
• Done
Now, every new app that you will install will automatically be moved to your sd ext partition.[/INDENT]
Click to expand...
Click to collapse
Same prob.

Can anyone help with link2sd on galaxy fit plz...
Sent from my GT-S5670 using xda premium

try different ext

Try ext4, it will surely work..
I had same prob on some roms..
"Bt nxt tym you flash anything through recovery you may have to mount ext4 again... "-nt pretty sure about this though..
Sent from my GT-S5670 using XDA

Nikhil_G said:
Can anyone help with link2sd on galaxy fit plz...
Sent from my GT-S5670 using xda premium
Click to expand...
Click to collapse
You didnt try the stuff I had replied about in my thread?
Sent from my GT-S5670

link2sd not working
try to format the sd card with MiniTool Partition Wizard Home Edition and make last partition as primary and Ext4.

problem that i can't see available memory..
I can't see the available memory , I mean i have partitioned 1024mb..but wen i see in the task manager it just shows 180mb..

pardasanichirag2 said:
I can't see the available memory , I mean i have partitioned 1024mb..but wen i see in the task manager it just shows 180mb..
Click to expand...
Click to collapse
That's normal, the task manager just displays the internal memory of the phone, I'm using S2E with Official Cyanogenmod and it works fine.

pardasanichirag2 said:
I can't see the available memory , I mean i have partitioned 1024mb..but wen i see in the task manager it just shows 180mb..
Click to expand...
Click to collapse
Use titanium backup or sd maid , these apps could show the size of your ext4 partition
Sent from my GT-S5670 using xda premium

you can mount your ext partition from cwm recovery - mount and storage - mount sd ext and reboot ...then in link2sd go in storage info you can see the sizes of partitions
Cheers
Sent from my GT-S5670 using xda premium

[Q] Rooted, now what?

Hi, I just used superoneclick to root my LG P500, and I presumed I could then removing junk apps and copying everything over to my SD card, however it seems I can't?
I installed busybox but no idea what that does! Am I missing something as I don't know what to do next?
Thank you.

Use link2sd
Sent from my LG-P500 using xda app-developers app

Ok, just installed it and it does delete crap, and gives an option to move to SD card but it just hangs and then says 'Failure' - invalid install location.
Does the SD card have to be formatted in a different way? If so, how?

frailfury said:
Ok, just installed it and it does delete crap, and gives an option to move to SD card but it just hangs and then says 'Failure' - invalid install location.
Does the SD card have to be formatted in a different way? If so, how?
Click to expand...
Click to collapse
i think you have rooted your phone but your still on stock rom
you should move to custom roms now
but if your sticking to stock rom for now
for moving app's to sd card try this guide
http://lgp500-optimusone.blogspot.in/2011/10/how-to-moveinstall-apps-to-sd-card-on.html

I'm using stock ROM yes. I think I need to format the SD card to ext2 or something. I only want to be able to copy everything to SD.
I tried making a partition as it says in the instructions, but the SD card is recognised as a 1GB card now in my phone rather than the 16GB it is.
It said to create a 14GB partition in ext2 format in order to transfer all apps to the card. If I do that though, 1GB isn't enough for all my music! Confused.

frailfury said:
I'm using stock ROM yes. I think I need to format the SD card to ext2 or something. I only want to be able to copy everything to SD.
I tried making a partition as it says in the instructions, but the SD card is recognised as a 1GB card now in my phone rather than the 16GB it is.
It said to create a 14GB partition in ext2 format in order to transfer all apps to the card. If I do that though, 1GB isn't enough for all my music! Confused.
Click to expand...
Click to collapse
Now do one thing.Format your sd card to fat32 and then repartition it using recovery and select 1 gb (not 14) ext 2,3 or 4(ext4 preferred).

ashishv said:
Now do one thing.Format your sd card to fat32 and then repartition it using recovery and select 1 gb (not 14) ext 2,3 or 4(ext4 preferred).
Click to expand...
Click to collapse
But surely, all I'm doing is partitioning the card so that 1GB is set to ext 2, meaning only 1GB of the card can be used for apps that can't normally be stored on the FAT32 partition?
Ok - since my last post, I did what you said so partitioned 1GB ext 2. When I open Link2SD, I get asked to choose the file system of my SD cards second partition. I can choose between:
ext2, ext2, ext4, and FAT32. Whatever I select, I get an error message - 'Mount script cannot be created. mount: Device or resource busy. ext2 maynot be supported on your device. Try FAT32 on the second partition'.
I then choose FAT32 and it says 'mount script cannot be created. mount: invalid argument'.
Just rebooted the phone and Link2SD doesn't ask me the above anymore, but now when I try again to move the Facebook app to the SD card, I still get the error:
Failure: pkg: /data/app/com.facebook.katana-1.apk Failure [INSTALL_FAILED_INVALID_INSTALL_LOCATION]
In yet 'Whatsapp' which usually has to stay on the phones memory has no problems being sent to the SD card in Link2SD.
Any ideas please?

Ok this is weird... I formatted the card again to FAT32, and then tried transferring whatsapp to the SD card and it worked.
Uninstalled Facebook and reinstalled it from the play store and that also can be moved! It's really strange but it works. I thought you had to partition the card.
I do have other questions though. Can you keep the stock rom, and still have everything you download auto install to the SD card?
What is busybox for? Do I need it?
What can I do to speed the phone up now?
Thanks.

Busybox is necessary....no need to partition the card......the failure error may occur if u are moving something from rom to external sd....first move it to internal....to speed up ur phone change the kernel...
.thundervn kernel is best for stock...make sure u hav clockworkmod recovery installed....if not....download rom manager from play store....
Sent from my LG-P500 using xda app-developers app

Use flash GUI and flash amon ra recovery onto ur phone ... that shud give u the amon ra recovery ... let me know if u need help with dat .. pm me
Sent from my LG-P500 using xda app-developers app

Just so you all know, I only want to use stock rom. I don't want to be messing about with custom roms.
The SD card isn't partitioned, and 95% of all apps seem to be going across to the SD card no problems, but I get that 'failure'message with an app called 'proboards' which I downloaded from the play store - any reason why? LinkSD does say it requires a partition but it says that for all the other apps that transferred across fine.
I've also noticed my internal memory is still slowly decreasing even when apps are being transferred to SD - what can I do to stop this?
Finally, I bought 'SetCPU' app for my phone. Not 100% how to use it but when I set the min and max cpu speed to the max my phone can offer, my phone seems much quicker - is this ok to do?
Thanks

frailfury said:
Just so you all know, I only want to use stock rom. I don't want to be messing about with custom roms.
The SD card isn't partitioned, and 95% of all apps seem to be going across to the SD card no problems, but I get that 'failure'message with an app called 'proboards' which I downloaded from the play store - any reason why? LinkSD does say it requires a partition but it says that for all the other apps that transferred across fine.
I've also noticed my internal memory is still slowly decreasing even when apps are being transferred to SD - what can I do to stop this?
Finally, I bought 'SetCPU' app for my phone. Not 100% how to use it but when I set the min and max cpu speed to the max my phone can offer, my phone seems much quicker - is this ok to do?
Thanks
Click to expand...
Click to collapse
You can try the ressurection rom . Its stock rom with some little tweaks dat increase the speed , battery life and overall performance. .. it also allows u to u set-cpu to do what its meant to do. .. over clock your device so that u can enjoy the games that seemed to lag .. and the rom also supports moving apps to the SD card
Sent from my LG-P500 using xda app-developers app

frailfury said:
Finally, I bought 'SetCPU' app for my phone. Not 100% how to use it but when I set the min and max cpu speed to the max my phone can offer, my phone seems much quicker - is this ok to do?
Thanks
Click to expand...
Click to collapse
Really to get the full benefit out of rooting you'll want to play with some custom roms but as for the cpu setting the minimum higher will just cause your battery to drain really fast. What you want is a custom kernal that will allow you to overclock the cpu past 600 on the max end.

frailfury said:
Just so you all know, I only want to use stock rom. I don't want to be messing about with custom roms.
The SD card isn't partitioned, and 95% of all apps seem to be going across to the SD card no problems, but I get that 'failure'message with an app called 'proboards' which I downloaded from the play store - any reason why? LinkSD does say it requires a partition but it says that for all the other apps that transferred across fine.
I've also noticed my internal memory is still slowly decreasing even when apps are being transferred to SD - what can I do to stop this?
Finally, I bought 'SetCPU' app for my phone. Not 100% how to use it but when I set the min and max cpu speed to the max my phone can offer, my phone seems much quicker - is this ok to do?
Thanks
Click to expand...
Click to collapse
Bout internal memory decreasing u can't do anything till u get a custom rom ... cause our stock ones don't allow a2sd
Sent from my LG-P500 using xda app-developers app

Ok, so at the moment I have transferred all my apps to the SD card. How would I go about flashing it then?
What rom should I use?
How will having a new rom stock the internal memory from being eaten up? And why is it still being eaten up now that they are all on the SD card?
Finally, surely if you overclock, it will use even more battery? I've just got it set to the maximum cpu so surely it must be improving something??

frailfury said:
Ok, so at the moment I have transferred all my apps to the SD card. How would I go about flashing it then?
What rom should I use?
How will having a new rom stock the internal memory from being eaten up? And why is it still being eaten up now that they are all on the SD card?
Finally, surely if you overclock, it will use even more battery? I've just got it set to the maximum cpu so surely it must be improving something??
Click to expand...
Click to collapse
Start by downloading titanium backup frm tge market and take a backup of your apps ... the option will be dere in backup/restore .. keep only user ticked under filter options ... that will give u a list of user installed apps .. do a batch backup
pls hit thanks if I helped in any way
:: peace
Sent from Legendary o1

anaknin said:
Start by downloading titanium backup frm tge market and take a backup of your apps ... the option will be dere in backup/restore .. keep only user ticked under filter options ... that will give u a list of user installed apps .. do a batch backup
pls hit thanks if I helped in any way
:: peace
Sent from Legendary o1
Click to expand...
Click to collapse
Thanks, but it's the rest I need answered too. Don't really want to flash if I'm being honest.

frailfury said:
Ok, so at the moment I have transferred all my apps to the SD card. How would I go about flashing it then?
What rom should I use?
How will having a new rom stock the internal memory from being eaten up? And why is it still being eaten up now that they are all on the SD card?
Finally, surely if you overclock, it will use even more battery? I've just got it set to the maximum cpu so surely it must be improving something??
Click to expand...
Click to collapse
For rom go for Ressurection .. i can get u to the correct forum ... clockspeed in a cpu means the no of iinstructions it processes per sec .. so a cpu running at 600mhz will execute 600 instructions per sec while one running at 800 will execute 800 instructions per sec ... basically it gives u a performance boost at the cost of battery.. and our phones are det at 122-600 by default so u cant get a performance boost but on the other hand it helps with battery
pls hit thanks if I helped in any way
:: peace
Sent from Legendary o1

Why not try "Ultimate Backup by JRummy". It helps move any app to SD Card...no need to flash a custom rom.
ROM - Paranoid Android by Bytecode.
Sent from my LG-P500 using xda app-developers app

anaknin said:
For rom go for Ressurection .. i can get u to the correct forum ... clockspeed in a cpu means the no of iinstructions it processes per sec .. so a cpu running at 600mhz will execute 600 instructions per sec while one running at 800 will execute 800 instructions per sec ... basically it gives u a performance boost at the cost of battery.. and our phones are det at 122-600 by default so u cant get a performance boost but on the other hand it helps with battery
pls hit thanks if I helped in any way
:: peace
Sent from Legendary o1
Click to expand...
Click to collapse
Anakin, so I wasted money on the setcpu app then? It does seem much quicker since changing the min/max speed to both be 600mhz. Think originally it was set to 320 each.

internal mem

hello guys I installed cm9 build 9 today after that I used recovery selected 1024 for ext and 0 swap after that remounted script on link2sd and I rebooted but I dont think it worked plz.see

Dude seriously http://forum.xda-developers.com/sitesearch.php?q=htc explorer internal memory at least try before creating a thread

been there, many times...
settings would give you the app info installed in internal memory, regardless it is linked to your sd-ext partition or simply residing in internal storage.
open link2sd, menu > storage info.... it shows graphically how much memory of what partition is used up. if under the sd-ext partition it says, "not mounted", then the script was not mounted properly.
you may want to re-do the process.
but, still you may consider what shortyoko has to say...(a bit of research is must, i spent 3 months on researchin )
shortyoko said:
Dude seriously http://forum.xda-developers.com/sitesearch.php?q=htc explorer internal memory at least try before creating a thread
Click to expand...
Click to collapse

i already spent 2 and am little tired so i though would do all steps and ask in general
anyway it does nt say not mounted and does link2sd does increase mem in the sys menu thats the storage and i can only see my mem at link2sd if thats the case i guess i did correct and also link2sd doesnt move all apps or does it?

The system partition remains the same. You can't extend it or something. Well, the very idea of increasing internal memory using is that link2sd uses the sd-ext partition to store all the app files, leaving just the app icon & a link to it's corresponding files in the sd-ext part..
Just press hold an app in link2sd > create link > select all 3 options (link apk, link data, link lib files) > then press ok / next (watever it says). If this is succesfull, you will get a msg saying, "app successfully linked to the second partition".
There you go !! All done. :thumbup:
Sent from my HTC Explorer A310e using xda app-developers app

Use s2e app for cm9. It will solve all your internal memory problems
Sent from my HTC Explorer A310e using xda premium

Use disk usage app for accurate info

got m2sd works best internal shows .890 mb

How to solve internal memory issue?

Hello,
I am using CyanogenMod 10.2. I want to increase internal memory. So that i can install more apps.
I am using class 4 8 Gb transcend memory card.
Kindly need your help guys.
Thanks in advanced.
Piyush

piyush1985 said:
Hello,
I am using CyanogenMod 10.2. I want to increase internal memory. So that i can install more apps.
I am using class 4 8 Gb transcend memory card.
Kindly need your help guys.
Thanks in advanced.
Piyush
Click to expand...
Click to collapse
Ok..
Now before increasing memory i would tell you take a bckup of your apps.. You never what may go wrong.. You can use titanium backup for that..
There are two methods of increasing memory:
1, Through Mounts2sd app
2. Through script.
Personally i use scrip.. As it doesnt need any configuration.. and you can see the size in apps which can be seen in settings..
Mounts2sd requires configuration.
Make a backup of your card before partition as it will format your card
Now for partition:
Go to recovery
Go to advance
select partition sd card
Select ext3 or ext4
Select the size you want
Then select swap size 0
You have partition your card and it can be used to increase memory..
Now to install scripts:
You can check this post for script Here
As you are on class 4 use int2ext+ or int2ext(this may slow your apps closing and opening time)
Now copy the above script in system/etc/init.d
How to do:
Using File explorer with root permissions
I personally use es file explorer as i find it easy..
So open es explorer
Touch option key right of home key.
Go to tools-> Root explorer -> Click on off button it will ask for permission allow it-> now again tap on root explore-> select mount R/W set it from RO to RW
Now copy the script..
After copying select the file by long pressing on it-> Select properties Go to permissions-> Tick on all the check boxes all 9 not the bottom 3..
Now restart your device..
Vola!! Internel memory increased..

Thanks a lot. I will try tonight. Thanks a lot. Hope it works. :good:
Can you please provide me scripts download link? that post is too big..

piyush1985 said:
Thanks a lot. I will try tonight. Thanks a lot. Hope it works. :good:
Can you please provide me scripts download link? that post is too big..
Click to expand...
Click to collapse
It confirm works m using it..
FOR INT2EXT GET IT HERE
FOR INT2EXT+ GET IT HERE
OPEN THE ZIP THEN EXTRACT THE FILE FROM SYSTEM/ETC/INIT.D AND PASTE IT..
FLASHING WILL GIVE THE ERROR
Hit thanks if i helped you..

Hey thanks a lot man. It worked. Sorry to disturb you again, actually i have increased upto 1 gb. If i have to make to then, should i follow the same process? What should i do?
Thanks a lot.:good::good::good:

piyush1985 said:
Hey thanks a lot man. It worked. Sorry to disturb you again, actually i have increased upto 1 gb. If i have to make to then, should i follow the same process? What should i do?
Thanks a lot.:good::good::good:
Click to expand...
Click to collapse
Then delete that partition..
For this you have to use partition wizard on your PC..
Connect your card to PC select both the drives delete them then create it again you will get the original size.. Go to recovery select 2048 instead of 1024 simple..
Hit thanks button buddy that is needed instead of saying.
via xda premium app