Database Info

Rooted and installed Android WiFi Tether. No worky!!

http://code.google.com/p/android-wifi-tether/
So I rooted this morning, went well, no problems along the way. Immediately installed this Android Wifi Tether application (linked above) and it isn't working right.
Any computer I connect to the phone will get an IP assigned to it, it sees the gateway (phone) but it cannot ping it, cannot ping out to the internet.
IPConfig output looks like this:
IP Address: 192.168.1.103
Subnet: 255.255.255.0
Gateway: 192.168.2.254
I've tried following the FAQ on the site, tried reinstalling the config files whatever, no help. I've also tried enabling/disabling WEP security, makes no difference, the computer still connects and sees the network as unsecured. :wtf:
If there's a different application I should use let me know. I'm just wondering if there are other settings I should be playing with.

Are you on the stock ROM or a custom ROM?

Stock rom.

poordna said:
Stock rom.
Click to expand...
Click to collapse
i think you may need to download an older version but i forgot which one, im running it right noe on Darch AOSP 2.1 and its running great
I think its one that has a pre1 in it

You should have a custom ROM to use that, I recommend MoDaCo's if you don't want your phone to change that much. Also, give mine a try

On MoDaCo now, working fine, wifi tether works flawlessly.

try this version out

HeroMeng said:
You should have a custom ROM to use that
Click to expand...
Click to collapse
although there was something in the stock rom that interfered (that most custom roms dont have), it DOES work with the pre1 version that was mentioned and posted... you do not HAVE to upgrade to a cooked rom.

Hi Guys,
You should download the 1.70 pre2 version. It will keep your phone from heating up so much like the earlier versions did. I've been using it on Fresh 1.1, Gumbo 1.5b, and the various 2.1 ROMS lately, all with great results.
http://android-wifi-tether.googlecode.com/files/wireless_tether_1_70-pre2_htc.apk

Nice, I was having the same problem with 1.6 and installing 1.7 worked. I can't get encryption to work, but at least I can connect. I needed this as I'll be taking a road trip with my new laptop. So thanks!

ICS LY-F1 nandroid with gapps

Ok.. The manufacturer finally release ICS for this tablet, it initially does not have gapps..... you need to install CWM and reboot into recovery through ADB... like i said you need to have CWM already installed!!!!! this works on ALL my tablets i just checked it out... it has market, gmail, and superuser. once it is installed you can access recovery by holding down volume:up and power until recovery shows up... ( before It could not be done)
here is the link and instructions for CWM:
http://forum.xda-developers.com/showthread.php?t=1378594
here is my nandroid:
http://www.2shared.com/file/HInNxhH1/2012-02-13143731.html
(i had to strip out google talk, it kept on giving me problems..)
on a side note you need a external card to access the nandroid, put it in /clockworkmod/backup/
i haven't tested anything else, ie can not load youtube app and not sure about video playback... netflix only plays sound not video...
if this helped you hit the like button.. i am poor and i only do this when i have time and out of love for this great device and OS.... i am not responsible if your wife leaves you or a natural disaster happens in your area or you brick that sucker.... flash at your own risk...
thanks goes out to everyone that made this possible... maybe i will see if i can port CM9 but don't hold me to that..

Good job, I was actually going to post this today as well until I searched to make sure no one else had already done it. CWM works great with this now that the capacitive buttons work, now to do some modding so we can get cm9 running on it. I still can't get netflix apk to stream, the sound works but no video.

ya i know! that sucks... i need to try to get a youtube app and push it to see if it works.. but i really love it... i wonder if i can try the momo9 cm9 and see what works and go from there.. but school and work keeps me busy as hell!!!

Google Talk works for me with "newtech25_for_ics4.0.3"- script

Google Talk does not work with anything I tried. Tried a lot of patches and versions. Any ideas ?

Try to reflash manufacture rom then newtech25_for_ics4.0.3 script.
i used this one http://www.sappasit.go.th/android/newtech25_for_ics4.0.3.zip
but if figured out there is bug in calendar sync with newtheck script. talk works also with video no problems at all

The gapps package I installed from clockwork mod had youtube in it and it works fine so I have no idea why netflix wouldn't work on ics when it was fine on the stock gb firmware.

what was the gapps package you used?

At this point two main issues
Market does not show system apps.
Some apps (google), even if installed from the Market gives a android system stop responding...
Update
Errors were due to Gapps not properly installed...
Small issue though Camera photos are up side down ?! Can anyone test it for me as well? as this may affect skype video calling ie.
Last thing to sort out Full market support and flash...

my camera works fine on mine, and i restored on 3 of the same tablets... i am working on finding a working google apps i guess... but everything works on mine. Weird, but i will lool for another ICS google apps and then do another nandroid. thanks for your feedback..

Use gapps v11 from CM9. Just flash them from CWM.
Sent from my Alldro Speed using xda premium

CWM on DVC Z7
Hi!
I've dot dvc z7 - its clon of ly-f1.
i try to inxtall cwm, but when i load recovery i can see ony icon and i cant see the menu.
what i do wrong?
sory for my english)

[email protected], if you are using gingerbread i have tried CWM on it and couldnt get it to work..... if on ICS try it again.... if it is a clone it should work.... unless they are using a different touchscreen driver or touchscreen???? i do not know off the top of my head...

web_ninja said:
[email protected], if you are using gingerbread i have tried CWM on it and couldnt get it to work..... if on ICS try it again.... if it is a clone it should work.... unless they are using a different touchscreen driver or touchscreen???? i do not know off the top of my head...
Click to expand...
Click to collapse
Im using last gb. 2.3.4 n all is worked. But if i install last ics from f1, touch keys isnt work and touchscreen is crazy when tablet charge.
hope next build of ics will work ok)

Sorry for the question.
Can i use CWM linked on first thread post for LY-F1?
They say only supported device is NOVO7 Advanced
Other thing, when i reboot into recovery from ROM Manager my tablet just boots normally, what's wrong?

releaser said:
Sorry for the question.
Can i use CWM linked on first thread post for LY-F1?
They say only supported device is NOVO7 Advanced
Other thing, when i reboot into recovery from ROM Manager my tablet just boots normally, what's wrong?
Click to expand...
Click to collapse
What version firmware you use?
may be cwm dont work with rom manager.
turn off ur tablet and press keys plus and power.
and cwm work with ics only.

[email protected] said:
What version firmware you use?
may be cwm dont work with rom manager.
turn off ur tablet and press keys plus and power.
and cwm work with ics only.
Click to expand...
Click to collapse
Thanks for the answer.
I'm on 2.3.4 from 20120107 when i press vol+ and power i only get a triangle with exclamation point inside and an android icon but nothing else.
So i need to flash ics first and then use cwm to flash the nandroid with gapps, right?
Regards

Hey I was trying to install CWM into my F1 and I cannot run the given scripts. It says permission denied. Any way to work this around?

It needs root. The easiest way is with Unlock Root.
Sent from my Nexus S using xda premium

As far as I know, the device comes pre rooted. I tried to root it again with superoneclick and it says it is already rooted.

Options for Verizon 3G Xoom

I just ordered a recertified Verizon 3G Xoom, and I didn't think about the implications of it being a Verizon device. This is NOT upgraded to 4G LTE -- will the "Stingray" builds of the various ROMS still work? Is there any way to apply WIFI-only ROMS (including stock) if I don't care about the 3G working? Given the age of the device I really want to get Jelly Bean on it.
I will need to cancel this order ASAP if the answers to these questions turn out to be "no"...

Same question from me.
Can we install the WiFi only version of ROMs (CM9 in particular) onto a Verizon 3G Xoom and have it work for everything EXCEPT the 3g? I could honestly care less about ever activating it on Verizonas long as WIFI works.

trunzoc said:
Same question from me.
Can we install the WiFi only version of ROMs (CM9 in particular) onto a Verizon 3G Xoom and have it work for everything EXCEPT the 3g? I could honestly care less about ever activating it on Verizonas long as WIFI works.
Click to expand...
Click to collapse
From reading a bit in the Development sub-forum, it looks like there's a JB leak for the VZW version, and either version (WIFI Only or VZW) of the EOS 3 ROM should work. I think I will keep my order.

magnafides said:
From reading a bit in the Development sub-forum, it looks like there's a JB leak for the VZW version, and either version (WIFI Only or VZW) of the EOS 3 ROM should work. I think I will keep my order.
Click to expand...
Click to collapse
Thanks. I'm placing my order as soon as Wife says OK. If you don't mind, and if you remember, please send me a PM of how it goes with the flashing once to get yours.
Would love to coordinate what we do since there doesn;t seem like a whole lot of certainty exists about what we are trying to do.

I'm probably just going to flash the EOS 3 WIFI Only version. According to one of the devs, it should work fine:
http://forum.xda-developers.com/showpost.php?p=28578030&postcount=8
But I will try to remember to let you know how it goes.

magnafides said:
I'm probably just going to flash the EOS 3 WIFI Only version. According to one of the devs, it should work fine:
http://forum.xda-developers.com/showpost.php?p=28578030&postcount=8
But I will try to remember to let you know how it goes.
Click to expand...
Click to collapse
Any luck? I also have a Xoom 3G MZ600 on the way and could careless about 3G...

hasnt eos got jellybean roms for all versions of the xoom? 3g should work imo
Sent from my Xoom using XDA Premium App

I'm in the same boat and curious to see if anybody has any words of wisdom. I love my refurbed Xoom 3G but am eager to get JB on it. Any help is greatly appreciated.

FWIW everything I have heard/read seems to indicate that it is possible to flash WiFi only ROMs on the 3G Xoom, and apparently everything will work fine except for the 3G (naturally). I haven't taken the plunge yet myself, still running stock ICS.
Is there any word on whether the Verizon 3G Xoom will get Jelly Bean?

It can be done....
I purchased a used 3g Xoom around Apr 2012. After initially unlocking / rooting and installing a ROM (EOS) on my 3g Xoom, the 3G radio wasn't working so I started fresh. I locked the device and SBF'd the original Xoom firmware, then used the official over the air (OTA) upgrades to get back to stock ICS. I thought this might fix the 3g issue; it did nothing.
EOS Roms overclock the GPU by default, which caused problems with my (and my wife's Wifi version) Xoom. My only requirements for a ROM are stability, no clutter from dumb carrier installed applications, compatibility, and of course root access. I found a pre-rooted stock Jellybean rom, but it was for the Wifi Xoom. It worked great on my wife's though; and heard rumors that it could work with mine.
*SO*...I took a leap of faith and installed it. It works great. No 3g radio of course, but I gave up on trying to get that to work anyway...so if you don't care about losing your 3g , this will probably work for you. I don't think my 3g will ever work, but I suspect this won't ruin yours if it is currently working. Don't hold me to that; this is a risk.
Random notes and refresher info:
-you will need an SD card. I'm pretty sure the following instructions will only work if you use one.
-If at any point you get the android guy with an orange exclamation point during boot...it is probably ok, just let it sit there for a couple minutes. it should continue to boot into whatever ROM you are currently on. Make sure you enable usb debugging in settings after boot.
-to access RSD, Recovery, or Fastboot mode, press and hold your power button to start the Xoom booting. When you see the Motorola logo, wait a second then press the volume down button. Then you can use volume down again to cycle through your options, and use volume up to choose one.
-the exact differences between RSD / Fastboot and Recovery modes are beyond the scope of this post (and me) so just know that your Xoom can be modified using software on your PC via USB with RSD and Fastboot modes, and stock recovery can be replaced with modified versions to add more functionality. Recovery is used to do all sorts of things...flash Roms, mount drives, format, cleanup caches, etc.
***
General instructions. Just guidelines; you will probably need some previous experience with computers / rooting etc.
(If you are already unlocked, rooted, and have a replacement recovery, skip to the last step.)
1.) Follow this guide to prep your Xoom: (unlocking, rooting, and install CWM recovery)
http://www.xoomforums.com/forum/motorola-xoom-development/15179-how-rookie-rooting-flashing-unrooting-under-one-roof.html
Note: you may have heard of Lord AOI tool; it is supposedly designed to simply the above process. I found it didn't work well and was more difficult to use than good ol' adb commands. I recommend skipping it.
2.) OPTIONAL: Next, I recommend using the latest Rogue recovery. Just use standard CWM recovery to flash it. It is nice because it allows you to use the touchscreen to manipulate instead of having to use the hardware buttons (volume buttons are kind of a pain). See here: http://forum.xda-developers.com/showthread.php?t=1235170
3.) Finally, flash the pre-rooted stock Jellybean ROM. See here: http://forum.xda-developers.com/showthread.php?t=1796335
(here's the direct ROM link for those not needing instructions or extra info: http://www.mediafire.com/?7w5w65l66hgggo8 )
Good luck and let us know your results...

[Q] TF101G no 3G and Baseband Unknown

Hoping someone can help here.
I have a TF101G (the 3G version of TF101). ASUS stock ROM works fine apart from the usual annoying problems with reboots and hangs. So I've tried a few custom 3G ROMs and Kernels.
Revolver (latest 3G) installs OK, but 3G doesn't connect - no APNs and can't add any, Search Network Operators fails with an error and Settings / About Tablet shows Baseband as Unknown. RaymanFX's new [DEV][WiP][3G/GSM] JellyBean for the TF101G - same deal. Everything seems to work except 3G.
Android Revolution HD 3.4.3 3G works fine which is great, but I'd like to try some others.
When I flash Stock or ARHD, on first boot it goes into setup with my location correctly preset to New Zealand. Neither Revolver nor JB seem to know where I am, and I'm wondering whether this has anything to do with the 3G not working.
I'm new to this, and to this forum so don't yet really know what I'm doing or have enough posts to be allowed to post in the Developer's area, so I'm hoping someone here might be able to point me in the right direction to get 3G working on either of these ROMs.
Thanks.

Having the same exact issue here

[Q] Questions regarding the TF300TL

I got the Asus Transformer TF300TL, US model with the LTE support, for Christmas. It came with ICS, which I was not happy with having come from the regular TF300T with JB for the past 8 months. I had MAJOR lag issues, graphics problems and such. I kept searching the web at least once a week to see if there was any news on the TF300TL getting an upgrade to JB. Could not find anything. I even emailed Asus directly to find out if there was any chances later on down the line (the person that helped me knew nothing, telling me that I could use the WW build software with no problems. I knew this person just didn't understand but tried anyway, just in case. The tablet didn't even see the file.) Well, at the end of Feb, the TF300TL finally got the boot up to 4.1, which helped a bit but I'm still finding alot of lags, error messages about how the app that I'm trying to start is taking too long and would I like to wait and such. I successfully rooted the tablet tonight (without having to unlock the bootloader) via the motochopper tool (AMAZING and freaking FAST tool for getting root on ANY device, if you're looking for an easy way to root) and now I'm looking at possibly flashing some custom ROMs onto my tablet, in an effort to get rid of this lag and headache. I know there aren't many, if at all ANY, ROMs for the TF300TL and that I could possibly use ROMs built for the TF300T but I will lose my LTE capabilities. Does anyone know of a way that I can somehow get the LTE software from the stock ROM to be able to keep the LTE once on a regular TF300T ROM? I'll be honest, I don't really use the LTE much, since I'm usually around a wifi signal and I have my Nexus 4 that I can use as a hotspot while out and about, as well as 2 Virgin Mobile hotspots. Just wondering if anyone has any experience with this tablet and getting anything other than stock running on it. Also, if I'm stuck with just the stock ROM, is there a way that I can flash TWRP recovery without unlocking or is that not possible? I've already tried twice tonight and it starts out good but then when it looks like it's writing the recovery to the recovery partition, it says "fail". Thanks!

CaliTexan5 said:
I got the Asus Transformer TF300TL, US model with the LTE support, for Christmas. It came with ICS, which I was not happy with having come from the regular TF300T with JB for the past 8 months. I had MAJOR lag issues, graphics problems and such. I kept searching the web at least once a week to see if there was any news on the TF300TL getting an upgrade to JB. Could not find anything. I even emailed Asus directly to find out if there was any chances later on down the line (the person that helped me knew nothing, telling me that I could use the WW build software with no problems. I knew this person just didn't understand but tried anyway, just in case. The tablet didn't even see the file.) Well, at the end of Feb, the TF300TL finally got the boot up to 4.1, which helped a bit but I'm still finding alot of lags, error messages about how the app that I'm trying to start is taking too long and would I like to wait and such. I successfully rooted the tablet tonight (without having to unlock the bootloader) via the motochopper tool (AMAZING and freaking FAST tool for getting root on ANY device, if you're looking for an easy way to root) and now I'm looking at possibly flashing some custom ROMs onto my tablet, in an effort to get rid of this lag and headache. I know there aren't many, if at all ANY, ROMs for the TF300TL and that I could possibly use ROMs built for the TF300T but I will lose my LTE capabilities. Does anyone know of a way that I can somehow get the LTE software from the stock ROM to be able to keep the LTE once on a regular TF300T ROM? I'll be honest, I don't really use the LTE much, since I'm usually around a wifi signal and I have my Nexus 4 that I can use as a hotspot while out and about, as well as 2 Virgin Mobile hotspots. Just wondering if anyone has any experience with this tablet and getting anything other than stock running on it. Also, if I'm stuck with just the stock ROM, is there a way that I can flash TWRP recovery without unlocking or is that not possible? I've already tried twice tonight and it starts out good but then when it looks like it's writing the recovery to the recovery partition, it says "fail". Thanks!
Click to expand...
Click to collapse
install cleanrom inerhitance 3.4.6 (the newer cleanrom xenogenesis 4.x still dont support 300tg/tl) and
andrew_z1 kernel from its companion kernel package, it should work on TL models with 4g active (unter's kernel works only on tg models, even if the name sais "tg/tl")
btw, please divide your messages in paragraphs, it helps a lot for readability - my eyes crossed while reading your word wall there.

NixZero said:
install cleanrom inerhitance 3.4.6 (the newer cleanrom xenogenesis 4.x still dont support 300tg/tl) and
andrew_z1 kernel from its companion kernel package, it should work on TL models with 4g active (unter's kernel works only on tg models, even if the name sais "tg/tl")
btw, please divide your messages in paragraphs, it helps a lot for readability - my eyes crossed while reading your word wall there.
Click to expand...
Click to collapse
Thanks so much for the quick reply! I really wasn't expecting something for a week or so, at least. I will remember your advice about posts for later. Sorry for this time.
I have unlocked my tablet and flashed that ROM and the kernel you recommended but neither the WiFi nor LTE work. I'm still able to go back to my backup of the stock ROM and everything works (Thank God). Any other ideas about what I could do? Thanks again!!

CaliTexan5 said:
Thanks so much for the quick reply! I really wasn't expecting something for a week or so, at least. I will remember your advice about posts for later. Sorry for this time.
I have unlocked my tablet and flashed that ROM and the kernel you recommended but neither the WiFi nor LTE work. I'm still able to go back to my backup of the stock ROM and everything works (Thank God). Any other ideas about what I could do? Thanks again!!
Click to expand...
Click to collapse
that's strange, another TL user said that andrew's kernel worked for him.

NixZero said:
that's strange, another TL user said that andrew's kernel worked for him.
Click to expand...
Click to collapse
I've even tried some of the other kernels that are in his kernel installer tool but I get the same thing every time (no WiFi and no LTE, not even 2G/3G). I even tried just keeping the stock kernel. I've messaged the guy that developed the ROM so hopefully he'll have some info. In the meantime, I'm gonna reread the whole post again (all 200+ pages) to see if I missed anything.
Thanks again!