hey guys I am stuck at firmware upgrade encountered an issue. please select recovery in Kies & try again
What I did I flashed on my ATT phone through odin a rogers rom stock rooted. And odin showed it as failed flash.
please please help what can I do, also I don't remember what version of gingerbread it had before I flashed it also I did not care to check kies connection before I flashed the phone with that rom.
please help
Hmm... did you try going back into Odin and back into download mode? I've never heard of this error. Sounds like a bad download... I think rogers and att roms are comparable... butbdont hold me too it
Sent from my SGH-I997 using xda app-developers app
U can flash thru odin from tgat screen, Open odin and connect ur phone and odin should reconize it.
Sent from my GT-I9300 using Tapatalk II
hykhleif said:
hey guys I am stuck at firmware upgrade encountered an issue. please select recovery in Kies & try again
What I did I flashed on my ATT phone through odin a rogers rom stock rooted. And odin showed it as failed flash.
please please help what can I do, also I don't remember what version of gingerbread it had before I flashed it also I did not care to check kies connection before I flashed the phone with that rom.
please help
Click to expand...
Click to collapse
I've always had more luck with Heimdall then Odin. Try putting your phone into download mode then using the UCLB3 one-click from this thread - http://forum.xda-developers.com/showthread.php?t=1629079
After that, boot CWM and load the stock kernel.
That should get you the best Close-To-Stock experience. I ran it for a while before recently switching to CM10.
Related
Posted this in the Kies ICS update thread as well .. can anyone help?
Ok, so I'm at the Firmware upgrade and initialization screen in Kies ... it's been stuck at 2% for about 20 minutes now. I'm assuming this is a problem. Anyone have advice on what I should do? Let it go ... disconnect, restore with CWM and try again?
My config when I started:
GB 2.3.6 - rooted, cwm touch installed
(Running on Windows 7 through VMWare on a MacBook Pro if that matters)
You need to be on stock recovery for it to work.
Sent from my SAMSUNG-SGH-I727 using xda premium
Damn.
So ... do I pull the plug, restore to the CWM backup I ran before running the update and then flash the stock recovery on it?
Odin back to 2.3 stock and it flashes stock recovery.
Sent from my SAMSUNG-SGH-I727 using xda premium
Check the stickies on here or in the dev section i cant post links
Sent from my SAMSUNG-SGH-I727 using xda premium
Thanks man, I'll give it a rip and post an update in a bit.
ODIN hates me.
I wasn't able to flash anything with odin, it just kept failing or hanging.
Fortunately, I was able to use CWM to recover so I got back up and running on my rooted 2.3.6 setup.
I tried Kies update again, same result. Ran through the download, then hit 2% on the install and hung. Odd thing is, Odin lets me flash CWM and I was able to recover with that again. But, Odin continues to fail on ROM flashes. This just doesn't make sense.
car vs driver said:
ODIN hates me.
I wasn't able to flash anything with odin, it just kept failing or hanging.
Fortunately, I was able to use CWM to recover so I got back up and running on my rooted 2.3.6 setup.
I tried Kies update again, same result. Ran through the download, then hit 2% on the install and hung. Odd thing is, Odin lets me flash CWM and I was able to recover with that again. But, Odin continues to fail on ROM flashes. This just doesn't make sense.
Click to expand...
Click to collapse
odin doesnt hate u
u cant flash a rom w/odin, what were u trying to flash w/odin
read this on restoring to stock, has info about odin
http://forum.xda-developers.com/showthread.php?t=1652398
Sorry, I mean firmware via Odin. I should be more careful with my words
Hello guys, I was trying to root my galaxy GT-I9003 to install an ICS rom and I had 2.3.6,,, I entered download mode and tried to use odin but it said failed. so i pushed the power button to swtich the phone off and it gave me a screen with cellphone and computer and yellow rectangle and it doesn't start or go to recovery mode the only thing i can do is to take the battery our for a minute then put it again and the only thing it does is to go to download mode and i tried to use odin again or samsun kies but nothing is working. how can i get this phone to work again please with the old OS or to start flashing a rom again?
Thanks,
Try rebooting the system and connecting and flashing again using odin.
If it still doesn't work reinstall samsung kies software and try connecting and flashing using odin.
If it still doesn't work, report here and someone will try to guide further. All the best.
Hetalk said:
Try rebooting the system and connecting and flashing again using odin.
If it still doesn't work reinstall samsung kies software and try connecting and flashing using odin.
If it still doesn't work, report here and someone will try to guide further. All the best.
Click to expand...
Click to collapse
yes I tried all this and i still have the same problem and thank you guys for helping in advance
and by the way odin always fail!!
What Odin version you've been trying?
Try a different odin version.
Sent from my GT-I9003 using xda premium
Hetalk said:
What Odin version you've been trying?
Try a different odin version.
Sent from my GT-I9003 using xda premium
Click to expand...
Click to collapse
I tried odin 1.7 and 3.07 and both are not working
I think the xxkpe zip file comes with Odin 1.83. Try it out as well.
Sent from my GT-I9003 using xda premium
Ok. Try installing xxkpe with pit on odin 1.83 then install your stock rom with odin 1.83 then it must work i think.
DONT FORGET TO PRESS THE THANKS BUTTON IF HELPED YOU IN ANY WAY
prottos101 said:
I tried odin 1.7 and 3.07 and both are not working
Click to expand...
Click to collapse
Did you install KIES? I think you have to. ODIN need some files from KIES. correct me if I'm wrong
and flash using this guides --> http://forum.xda-developers.com/showthread.php?t=1133787
My phone galaxy sl gt-i9003 was running was rooted and running on codename(android) when I flash some random kernel and bricked it. I then read though lots of xda-developers threads and followed whatever was said there. It goes into recovery and download mode. So i flashed the stock ROM( which i had downloaded from sammobile ). But after that it got stuck in boot loop. Then I tried flashing a few ROM suggestions given here in xda. But each time I either got back a bricked phone or boot loop problem. Help Please!!!:crying:
balaji.nataraj said:
My phone galaxy sl gt-i9003 was running was rooted and running on codename(android) when I flash some random kernel and bricked it. I then read though lots of xda-developers threads and followed whatever was said there. It goes into recovery and download mode. So i flashed the stock ROM( which i had downloaded from sammobile ). But after that it got stuck in boot loop. Then I tried flashing a few ROM suggestions given here in xda. But each time I either got back a bricked phone or boot loop problem. Help Please!!!:crying:
Click to expand...
Click to collapse
Hard brick or softbrick
install that firmware downloaded from samfirmware.com if they could all downloads mode or go into recovery mode then wipe data / factory reset
Or try install cwm recovery via odin
╔═╦═╦═╦═╦╗╔╗
║╚╣║║╚╣╚╣╚╝║
╠╗║║║║║║╠╗╔╝
╚═╩═╩╩╩╩╝╚╝
Bad english
Sent from my phone using xda app-developers app
since u have screwed your along the way to get boot. you better to flash xxkpe or xxkpq with pit
and repartition is amust cause you are on ext4
Sent from my Galaxy Nexus using Tapatalk 2
hmmp, i somehow recover on that situation by re partitioning through odin using pit from I9003DXKB2 stock rom froyo...
then flash a I9003DXKP9 gingerbread through odin also
I9003DXKB2 is my SL's original firmware since i bough it though
but might help you...
i did all those because i want my SL to run CM10 Alpha 4 jelly bean
i downloaded the stock roms from "[ROM] STOCK ROMS for GALAXY SL I9003" thread in the developers section...
yes its better to flash with xxkpe and then with xxkpq... me too experience the same problem...
follow this: http://forum.xda-developers.com/showthread.php?t=1133787
download firmware from here: http://forum.xda-developers.com/showthread.php?t=1004647
Thank you all for replying. I solved the problem. I had forgotten to factory reset after flashing stock rom. Now its as good as new. Also I had this doubt. Is it required that you factory reset after every flash?
Sent from my GT-I9003 using xda app-developers app
unbrick your phone
balaji.nataraj said:
My phone galaxy sl gt-i9003 was running was rooted and running on codename(android) when I flash some random kernel and bricked it. I then read though lots of xda-developers threads and followed whatever was said there. It goes into recovery and download mode. So i flashed the stock ROM( which i had downloaded from sammobile ). But after that it got stuck in boot loop. Then I tried flashing a few ROM suggestions given here in xda. But each time I either got back a bricked phone or boot loop problem. Help Please!!!:crying:
Click to expand...
Click to collapse
just download heimdall oneclick.jar and run it on windows,in phone go to download mode ,in pc click on oneclick.jar and run it then click on unbrick me and unbrick your phone its easy
APU KALITA said:
just download heimdall oneclick.jar and run it on windows,in phone go to download mode ,in pc click on oneclick.jar and run it then click on unbrick me and unbrick your phone its easy
Click to expand...
Click to collapse
HEIMDALL ONE-CLICK.....haven't heard this before?...
hye. can somebody help me. my tab plus having problem after upgrading using kies. it stuck for over an hour and i unplugged usb from the tab. when i turn it on, it appear "firmware upgrade encountered an issue. please select recovery ode in kies & try again" . but when i plug my tab, the kies seem like doesnt recognize the tab. it doesnt connect with my tab. is my tab brick?what can i do to make it function again?please help me.:crying:
Im not really an expert but i'll try..
Can you enter odin mode? If yes, then you can flash your stock HC rom.. but guessing from your problem.. do you know how to use odin? If dont, try to do some research.. so heres my tip..
1. Find your stock HC firmware at www.samfirmware.com
2. Flash the firmware via odin..
3. (From experience) it will boot loop in the samsung animation
4. Dont worry.. enter recovery and do both wipes
5. Your boot will now proceed..
BEFORE I FORGET.. WIPING IS SAFE ON STOCK HC ROM.. DO NOT WIPE FROM STOCK ICS ROM.. I REPEAT DO NOT WIPE FROM STOCK ICS ROM
PEOPLE OUT THERE.. PLEASE CORRECT ME IF IM WRONG..
IM JUST HELPING OUR FRIEND HERE..
Sent from my GT-P6200 using XDA Premium HD app
I have the same issue when i flash my tab with the latest firmware..but then i flash latest cwm odin version..go to cwm recovery..and did factory reset..bravo!!! My tab is alive
Sent from my GT-P6200 using xda premium
theejay0625 said:
Im not really an expert but i'll try..
Can you enter odin mode? If yes, then you can flash your stock HC rom.. but guessing from your problem.. do you know how to use odin? If dont, try to do some research.. so heres my tip..
1. Find your stock HC firmware at www.samfirmware.com
2. Flash the firmware via odin..
3. (From experience) it will boot loop in the samsung animation
4. Dont worry.. enter recovery and do both wipes
5. Your boot will now proceed..
BEFORE I FORGET.. WIPING IS SAFE ON STOCK HC ROM.. DO NOT WIPE FROM STOCK ICS ROM.. I REPEAT DO NOT WIPE FROM STOCK ICS ROM
PEOPLE OUT THERE.. PLEASE CORRECT ME IF IM WRONG..
IM JUST HELPING OUR FRIEND HERE..
Sent from my GT-P6200 using XDA Premium HD app
Click to expand...
Click to collapse
thanks!!i will try this. and i just realize that i posted this in development section. sorry.
arfian said:
I have the same issue when i flash my tab with the latest firmware..but then i flash latest cwm odin version..go to cwm recovery..and did factory reset..bravo!!! My tab is alive
Sent from my GT-P6200 using xda premium
Click to expand...
Click to collapse
i'm downloading the latest firmware right now and try this method after the download is done. i hope my tab will be just like yours. ALIVE!!
edit : its not working. failed flashing with odin. i dunno what happen. is there any other solution. my tab is not rooted and for sure usb debugging also off. maybe flashing with odin failed because usb debugging is off right.
mijul mojas said:
thanks!!i will try this. and i just realize that i posted this in development section. sorry.
Click to expand...
Click to collapse
theejay0625 said:
Im not really an expert but i'll try..
Can you enter odin mode? If yes, then you can flash your stock HC rom.. but guessing from your problem.. do you know how to use odin? If dont, try to do some research.. so heres my tip..
1. Find your stock HC firmware at www.samfirmware.com
2. Flash the firmware via odin..
3. (From experience) it will boot loop in the samsung animation
4. Dont worry.. enter recovery and do both wipes
5. Your boot will now proceed..
BEFORE I FORGET.. WIPING IS SAFE ON STOCK HC ROM.. DO NOT WIPE FROM STOCK ICS ROM.. I REPEAT DO NOT WIPE FROM STOCK ICS ROM
PEOPLE OUT THERE.. PLEASE CORRECT ME IF IM WRONG..
IM JUST HELPING OUR FRIEND HERE..
Sent from my GT-P6200 using XDA Premium HD app
Click to expand...
Click to collapse
its not working. failed flashing with odin. i dunno what happen. is there any other solution. my tab is not rooted and for sure usb debugging also off. maybe flashing with odin failed because usb debugging is off right.
Hello guys, whats up?
i was using cyanogem mod 10.1 but it was no good so i decided to use odin and flash a stock 4.0.4 rom for my p6210, i found it at sam firmware, it flashed ok but it was freezing on samsung so i decided to try again and odin showed me its sucessfull but it is not..
Now the tablet shows me " firmware upgrade encountered an issue, please select recovery mode in kies & try again.
Any help? thanks
Still dont works
Ok now ive found an other odin version 1.83 and used pda>>start and it was perfect but now i receive annother error, i shows me could not mount /system... guys please? i think i need the pit file for the P6210 tablet and i could not find it, where can i find it?
Have u tried to check it out at samfirmware..somewhere out there..
Sent from my GT-P6200 using xda premium
do you wipe data before flash the stock 4.0.4???
If not, flash the CWM recovery and wipe data and flash again the stock firmware.