I only can get to download mode galaxy GT-I9003 - Samsung Galaxy SL i9003

Hello guys, I was trying to root my galaxy GT-I9003 to install an ICS rom and I had 2.3.6,,, I entered download mode and tried to use odin but it said failed. so i pushed the power button to swtich the phone off and it gave me a screen with cellphone and computer and yellow rectangle and it doesn't start or go to recovery mode the only thing i can do is to take the battery our for a minute then put it again and the only thing it does is to go to download mode and i tried to use odin again or samsun kies but nothing is working. how can i get this phone to work again please with the old OS or to start flashing a rom again?
Thanks,

Try rebooting the system and connecting and flashing again using odin.
If it still doesn't work reinstall samsung kies software and try connecting and flashing using odin.
If it still doesn't work, report here and someone will try to guide further. All the best.

Hetalk said:
Try rebooting the system and connecting and flashing again using odin.
If it still doesn't work reinstall samsung kies software and try connecting and flashing using odin.
If it still doesn't work, report here and someone will try to guide further. All the best.
Click to expand...
Click to collapse
yes I tried all this and i still have the same problem and thank you guys for helping in advance
and by the way odin always fail!!

What Odin version you've been trying?
Try a different odin version.
Sent from my GT-I9003 using xda premium

Hetalk said:
What Odin version you've been trying?
Try a different odin version.
Sent from my GT-I9003 using xda premium
Click to expand...
Click to collapse
I tried odin 1.7 and 3.07 and both are not working

I think the xxkpe zip file comes with Odin 1.83. Try it out as well.
Sent from my GT-I9003 using xda premium

Ok. Try installing xxkpe with pit on odin 1.83 then install your stock rom with odin 1.83 then it must work i think.
DONT FORGET TO PRESS THE THANKS BUTTON IF HELPED YOU IN ANY WAY

prottos101 said:
I tried odin 1.7 and 3.07 and both are not working
Click to expand...
Click to collapse
Did you install KIES? I think you have to. ODIN need some files from KIES. correct me if I'm wrong
and flash using this guides --> http://forum.xda-developers.com/showthread.php?t=1133787

Related

[Q] Soft-Bricked friend's Infuse

I was trying to flash stock GB from Froyo on my friend's new infuse..
I followed all the instructions, however I got a Phone-!-PC screen.
I tried a JIG to get into DL mode but that didn't work.
Any help would be nice, thanks
brijesh1996 said:
I was trying to flash stock GB from Froyo on my friend's new infuse..
I followed all the instructions, however I got a Phone-!-PC screen.
I tried a JIG to get into DL mode but that didn't work.
Any help would be nice, thanks
Click to expand...
Click to collapse
Are u using odin?
SENT FROM MY AEON v1.3.1 POWERED INFUSE..
Yea this also happened to me
I was flashing Jscot30's "AT&T 2.3.6 Gingerbread with root and CWM"
droid73 said:
Are u using odin?
SENT FROM MY AEON v1.3.1 POWERED INFUSE..
Click to expand...
Click to collapse
Yes I was using Odin
That phone-!-pc screen is a form of download mode. You can use Odin here. Just reset Odin and restart your flash.
Sent from my SAMSUNG-SGH-I997 using Tapatalk 2
This might Work
Okay I just tried GTG's Ultimate unbrick, you don't need to go into DL mode to use it. It worked for me
Tinyguy said:
Okay I just tried GTG's Ultimate unbrick, you don't need to go into DL mode to use it. It worked for me
Click to expand...
Click to collapse
Again, that was download mode.
You can flash the stock GB Odin packages there also.
Sent from my SAMSUNG-SGH-I997 using Tapatalk 2
Thanks
Okay Iam downloading GTG's unbrick
Thanks for all your help
jscott30 said:
Again, that was download mode.
You can flash the stock GB Odin packages there also.
Sent from my SAMSUNG-SGH-I997 using Tapatalk 2
Click to expand...
Click to collapse
agreed,that is a download mode,when you see the phone-!-pc,that is a download mode and odin should work at that point..
brijesh1996 said:
Okay Iam downloading GTG's unbrick
Thanks for all your help
Click to expand...
Click to collapse
That's fine, and will work, but is unnecessary. You can flash the Gingerbread Odin packages in this mode also. If you restart the 2.3.6 package that you were attempting before, it will flash in this mode.
droid73 said:
agreed,that is a download mode,when you see the phone-!-pc,that is a download mode and odin should work at that point..
Click to expand...
Click to collapse
if odin doesnt work,will give you hemili one click method which worked for me when odin wouldnt.
Tinyguy said:
Okay I just tried GTG's Ultimate unbrick, you don't need to go into DL mode to use it. It worked for me
Click to expand...
Click to collapse
And to clear up any confusion, you DO need to be in download mode to use GTG's Ultimate Unbrick. You were in download mode, and that's why it worked for you.
EDIT: I just added this to the FAQ in my thread for the rooted UCLB3 Odin packages that I put together.:
3.) My phone is displaying something that looks like this: Phone-!-PC. What is this, and can I use these Odin packages from here?
That is still download mode. If you reach that screen, a flash has been interrupted or has failed, and you are in a type of backup download mode. Reset Odin, and start over with your flash. These packages will flash in this mode, just as they will in regular download mode.

Odin fails at modem.bin

i have a galaxy S whic i bricked. im trying to flash a ROM using Odin. it all goes fine until the modem.bin which fails.. neeed urgent help
XxRubikxX said:
i have a galaxy S whic i bricked. im trying to flash a ROM using Odin. it all goes fine until the modem.bin which fails.. neeed urgent help
Click to expand...
Click to collapse
I've had this problem b4, if u were using adb earlier open up task manager and fc it. Also if u have more than one flashing program (odin, heimdall, one click, gremlin remover...etc) close all but the one you are trying to flash with then restart download mode.
XxRubikxX said:
i have a galaxy S whic i bricked. im trying to flash a ROM using Odin. it all goes fine until the modem.bin which fails.. neeed urgent help
Click to expand...
Click to collapse
Pull out your phone's battery and check whether it says SGH-T959V in the sticker under the battery.
I've had this problem b4, if u were using adb earlier open up task manager and fc it. Also if u have more than one flashing program (odin, heimdall, one click, gremlin remover...etc) close all but the one you are trying to flash with then restart download mode.
Click to expand...
Click to collapse
It didnt work for me.. i FCed adb, closed everything but this forum page n Odin still fail at modem.bin
my device is SGH-T959V.
What Rom are you trying to flash? What version of Odin are you using? Have you used my 1 click gremlin remove?
Sent from my SGH-I727 using xda app-developers app
What Rom are you trying to flash? What version of Odin are you using? Have you used my 1 click gremlin remove?
Sent from my SGH-I727 using xda app-developers app
Click to expand...
Click to collapse
Im trying to flash back to factory ROM. my Odin version is 3 v1.85. and gremlin remove i have yet to try after Odin i went heimdall but that wudnt detect my phone in download mode.
thomas.raines said:
What Rom are you trying to flash? What version of Odin are you using? Have you used my 1 click gremlin remove?
Sent from my SGH-I727 using xda app-developers app
Click to expand...
Click to collapse
Tried your gremlin remover.
fails at data.rfs

help stuck at( firmware upgrade encountered an issue. please select recovery in Kies

hey guys I am stuck at firmware upgrade encountered an issue. please select recovery in Kies & try again
What I did I flashed on my ATT phone through odin a rogers rom stock rooted. And odin showed it as failed flash.
please please help what can I do, also I don't remember what version of gingerbread it had before I flashed it also I did not care to check kies connection before I flashed the phone with that rom.
please help
Hmm... did you try going back into Odin and back into download mode? I've never heard of this error. Sounds like a bad download... I think rogers and att roms are comparable... butbdont hold me too it
Sent from my SGH-I997 using xda app-developers app
U can flash thru odin from tgat screen, Open odin and connect ur phone and odin should reconize it.
Sent from my GT-I9300 using Tapatalk II
hykhleif said:
hey guys I am stuck at firmware upgrade encountered an issue. please select recovery in Kies & try again
What I did I flashed on my ATT phone through odin a rogers rom stock rooted. And odin showed it as failed flash.
please please help what can I do, also I don't remember what version of gingerbread it had before I flashed it also I did not care to check kies connection before I flashed the phone with that rom.
please help
Click to expand...
Click to collapse
I've always had more luck with Heimdall then Odin. Try putting your phone into download mode then using the UCLB3 one-click from this thread - http://forum.xda-developers.com/showthread.php?t=1629079
After that, boot CWM and load the stock kernel.
That should get you the best Close-To-Stock experience. I ran it for a while before recently switching to CM10.

Tab 2 7" totall meltdown when attempted root!

Ok, i haven't been at this very long but i thought i would try to root my GT-P3110 tab.
So i did and tried everything here: http://forum.xda-developers.com/showthread.php?t=1722745&highlight=galaxy+tab+2+7+p3110
Resulting i bootloop, and i have searched everywhere for a solutionbut nothing helped, so i tried reinstall the
firmware (from SamMobile.com), but it failed too and now im in the state
where it says "firmware upgrade encountered an issue...". I've tried redoing it with no result...
Is my tablet totally bricked or is i possible to fix?
I think it is soft brick as you could enter download mode and recovery mode try to download firmware from www.samfirmware.com and enter download mode and try flashing with pc odin
Make sure that samsung drivers are installed and that when you connect tab to pc a yellow line inside it a port with somenumber appear in odin before flashing
Sent from my GT-P5100 using xda app-developers app
done it!
Yeah, iv'e done that several times with different .md5 files and all i get is this:
View attachment 1282334
Some experiments
1-Make sure that samsung drivers are installed and reboot computer afterwards for them to be applied or even install kies and reboot afterwards
2-Connect device to different usb port and try again try those usb in rear case not the front may be reboot afterwards
3-Download file again may be corrupted download and make sure it is for you model number specifically for 3110 not any other
4-Download odin again and try version 1.85 works best for me
5- Make sure you are in download mode not recovery mode it says downloading now do not turn off target
6- Make sure extension of file is tar or tar.md5
7- See if you could enter recovery mode by volume up+power in boot and if it is cwm try to flash cm9 or 10 from site www.teamhacksung.com for your device 3110 not any device else if you entered old stock recovery then connect with kies and try option of recovery in it make sure computer connected to internet
Sent from my GT-P5100 using xda app-developers app
I shall try! I should mention that ive tried installing different .pit files too, it matters right?
Sent from my Galaxy Nexus using xda app-developers app
herfie said:
I shall try! I should mention that ive tried installing different .pit files too, it matters right?
Sent from my Galaxy Nexus using xda app-developers app
Click to expand...
Click to collapse
As i know pit files ard somewhat dangerous if used incorrectly leave them as last resort as they format system completely and repartition it and do not try pit files individually try those which come with the stock rom only they are specifically for this rom if you download stock rom and find pit file so you could use it if you did not find pit file in the stock rom only a tar file so do not use a pit file from external source
Sent from my GT-P5100 using xda app-developers app
Then this might be the problem? But if i reinstall the stock .pit file it should do the trick? Got to solve this man, thanks for all the help!
Sent from my Galaxy Nexus using xda app-developers app
Solved!
I managed to solve it using stock pit file and and stock firmware in Odin!
Thanks for the help!
Same Problem, but I can't get the download mode
Ok so I have the same tab, with the same problem, but I can't get the dowload mode. When I try to... It just boots back to the "error screen".
I've tried to use Odin to restore it but no matter what I do I get "Fail".
Can anyone please explain me... how can I fix it? (Please explain step-by-step because I'm a noob :silly

[Q] Odin Failed - Please Help

Hi Ill try to flash the last firmware from China for my P5110. I use Mobile Odin, but I check Wipe Data and Cache, apparently this caused and error and Im getting a bootloop, no flashing at all.
All I can do is get into Download Mode, so i did it, I tried to flash using Odin in my desktop. But it failed.
What can I do? Please
I need a pit file?
No recovery mode...
Thanks in advance
I think u got 400€ + BRICK IF you fail PC odin
Sorry can't help
Sent from my GT-P3100 using xda app-developers app
What specific steps did you take when flashing via Odin?
As far as I recall you don't change any check boxes and you place the stock tar image in PDA mode...
Sent from my GT-P5113 using XDA Premium HD app
Miqueas111 said:
Hi Ill try to flash the last firmware from China for my P5110. I use Mobile Odin, but I check Wipe Data and Cache, apparently this caused and error and Im getting a bootloop, no flashing at all.
All I can do is get into Download Mode, so i did it, I tried to flash using Odin in my desktop. But it failed.
What can I do? Please
I need a pit file?
No recovery mode...
Thanks in advance
Click to expand...
Click to collapse
If you can get into Download Mode... don't worry. You can try flashing a stock rom with odin. If this don't work, then you have to flash a stock rom with odin but adding the pit file and marking the repartition check box.
All your info will be erased... but your tablet will come back to life

Categories

Resources