Database Info

Question/opinions about ril's and att?

Just updated my radio and ril. I just flashed my first rom( gingerbeast) yesterday. Today I did my first radio and ril. I followed the recommended chart and updated to the latest att radio(06.06.30-M) and the recommended ril 2.2.0079hm.
My question is I noticed in several members signature and they are also running the latest radio but a lot are running the 2.2.0018G with gingerbeast? Am I missing something, have y'all getting better performance with this ril?
I do understand that all phones are different etc...just looking for opinions and personal limes.

Please post in the correct sections.
Thread moved

The 18G ril is for AOSP ROMs
Sent from my Inspire 4G using XDA Premium App

Can someone tell me what is AOSP rom or source. I googled but no luck. I have seen this mentioned in other post.

swatcop1 said:
Can someone tell me what is AOSP rom or source. I googled but no luck. I have seen this mentioned in other post.
Click to expand...
Click to collapse
It is Android Open Source Program (I think) its the way Google made it and then HTC added there stuff to it.
Sent from my Inspire 4G using XDA Premium App

The Gingerbeast is a AOSP hybird ([rom/kernel] * GingerBeast * -AOSP hybrid- 2.1.2 according to the developer) so should I be using the other ril that I stated above?
Thanks for replies!! and help!

swatcop1 said:
The Gingerbeast is a AOSP hybird ([rom/kernel] * GingerBeast * -AOSP hybrid- 2.1.2 according to the developer) so should I be using the other ril that I stated above?
Thanks for replies!! and help!
Click to expand...
Click to collapse
Yes you should use the 18G one
Sent from my Inspire 4G using XDA Premium App

Thanks I will install the 2.2.0018G ril now....

swatcop1 said:
Thanks I will install the 2.2.0018G ril now....
Click to expand...
Click to collapse
No problem good luck
Sent from my Inspire 4G using XDA Premium App

Thanks for your expertise, will watch all day tomorrow and see how it performs.

swatcop1 said:
Thanks for your expertise, will watch all day tomorrow and see how it performs.
Click to expand...
Click to collapse
You may need to watch it a little longer than a day, just so you know. This allows for the radio changes to "settle in," and also gives some leeway to allow for any ATT/network signal inconsistencies that day that might color your evaluation of the radios performance.
Hopefully you had a somewhat good idea of how your previous radio/signal would perform in areas you frequent regularly, so you'll be better able to determine whether, over the course of several days, your signal appears more or less jumpy, stronger/weaker in those familiar areas.
Also, at least when editing the build.prop file, and perhaps when when flashing radios/RILs, as it's related, I've seen it recommended to reboot not once, but *twice*, after flashing. Apparently something needs that second reboot to "kick in."
Like I said, I'm not quite sure if the reboot twice thing necessarily applies to radios/RILs, but I do it twice, just in case.
It certainly can't hurt...

Will do, thanks for suggestion and your time. Excited to learn about these things.

swatcop1 said:
Will do, thanks for suggestion and your time. Excited to learn about these things.
Click to expand...
Click to collapse
No problem.
Just don't slack on checking them MD5's, first, whatever it is.

ALPHA: Nyan kernel 3.X builds

Thank you bbelos for the port of kernel 3.x
This thread will contain test builds of a Nyan colonel built off of kernel 3.x. This does not currently have voodoo sound or over clock capabilities. This has a bunch of tweaks I have found and would like tested such as didle and other new things. This is based on the 3.x port by bbelos.
What does not work:
Vibration
4G WiMax
Compass
You need to put the following files on your SD card along with the kernel:
Download all files here besides zImage
Now you will need to download the test kernel. If it is named zImage.bin, rename it zImage:
6/3/12 9:49 EST: http://i.minus.com/1338785488/MLUAXU3KBgO9DEjDXcsUKA/iyU7MabwAtc4I
Flash boot_zImage_with_boot.zip in CWM or twrp and it should reboot into the kernel.

It should be mentioned the orientation sensor doesn't work either, although I'm not sure if it's just the auto-rotation feature that doesn't work or it won't even turn orientation when you want to change the orientation of your camera.
One question though: What are the benefits of the new kernel?

|| Acer || said:
It should be mentioned the orientation sensor doesn't work either, although I'm not sure if it's just the auto-rotation feature that doesn't work or it won't even turn orientation when you want to change the orientation of your camera.
One question though: What are the benefits of the new kernel?
Click to expand...
Click to collapse
The orientation works fine for me...
Sent from my SPH-D700 using Tapatalk 2

MДЯCЦSДИT said:
The orientation works fine for me...
Sent from my SPH-D700 using Tapatalk 2
Click to expand...
Click to collapse
Then why does it say this on Epic CM's blog?
Epic CM said:
What Doesn't Work Yet
WiMAX
Orientation Sensor
Haptic Feedback
More to add as we find it
Click to expand...
Click to collapse

The screen orientation, oddly enough, is not handled by the orientation sensor. Or at least not in this case. It must be handled by the accelerometer. The orientation sensor is needed for things like compass apps, etc.
Sent from my SPH-D700 using XDA

|| Acer || said:
Then why does it say this on Epic CM's blog?
Click to expand...
Click to collapse
It used to say cap time out did not work. I just recently told bbelos that orientation works now. My build can also have different bugs/fixes. For example, I fixed the color issues on mine.
Sent from my SPH-D700 using Tapatalk 2

MДЯCЦSДИT said:
It used to say cap time out did not work. I just recently told bbelos that orientation works now. My build can also have different bugs/fixes. For example, I fixed the color issues on mine.
Sent from my SPH-D700 using Tapatalk 2
Click to expand...
Click to collapse
I never said portrait/landscape mode didn't work. The orientation sensor doesn't work. It doesn't return any readings. Test it with Elixir2, or a compass app.
Sent from my SPH-D700 using XDA

bbelos said:
I never said portrait/landscape mode didn't work. The orientation sensor doesn't work. It doesn't return any readings. Test it with Elixir2, or a compass app.
Sent from my SPH-D700 using XDA
Click to expand...
Click to collapse
I assumed orientation was portrait/landscape.
Sent from my SPH-D700 using Tapatalk 2

The capacitive buttons on my phone are dimmed while using this temporarily
The phone rotates fine for me when I turn it sideways
Sent from my SPH-D700 using XDA

This is awesome btw. Can't wait til you can get all the options that make the 2.x nyans what they are working.
I would also like to know, in layman's terms, what the benefits of using the 3.x kernels will be (once they're fully operational of course).
Sent from my SPH-D700 using xda premium

beltsnspoons said:
This is awesome btw. Can't wait til you can get all the options that make the 2.x nyans what they are working.
I would also like to know, in layman's terms, what the benefits of using the 3.x kernels will be (once they're fully operational of course).
Sent from my SPH-D700 using xda premium
Click to expand...
Click to collapse
Fixes, compatibility, speed, security
Sent from my SPH-D700 using Tapatalk 2

the only problems i have is the original problems and the dimmed lights but other than that its really responsive now and loving it the only features i never use is gps and 4g so its fine for me its kinda weird not having vibrations but its fine

Thread cleaned.
If there are issues with permissions and such please PM me or the OP and it will be quickly handled.
Thank you for your cooperation
Friendly Neighborhood Moderator

Back up.
Bbelos accidentally posted links to Uberpinguin's private file server and I used the kexec zip link from his blog post. Warren did not know the whole story (I assume) and publicly posted (if you saw it, you saw it). Uberpinguin kindly asked and I removed the link and apologized to him. He understood and Kenny unlocked the thread.
Sent from my SPH-D700 using Tapatalk 2

A bunch of misunderstandings and too many mediums to contact people through.
Moral of the story is let's resolve conflicts privately.
Thanks
FNM
Sent from my PantechP4100 using xda premium

guess i missed all the "fun." pretty glad i did too. anyways, i still havent tried this kernel out. i'll try to give it a shot tonight. does it work with any ics rom or should i stick with cm while testing it now? and as far as the tweaks you mention in the OP, are they behind the scenes tweaks, or should i use a specific app to utilize them, like nstools for live OC and such on your other kernels? which i still dont really know how to use, lol. i just leave the live OC option at 100% on nstools. not sure what im sposed to use for the best performance or best battery tho. but ill go to the nyan v5 thread to ask about that stuff.

http://db.tt/OKYgWPN9
Sent from my SPH-D700 using Tapatalk 2

MДЯCЦSДИT said:
http://db.tt/OKYgWPN9
Sent from my SPH-D700 using Tapatalk 2
Click to expand...
Click to collapse
whats this?

beltsnspoons said:
whats this?
Click to expand...
Click to collapse
its called a kernel lol zImage means its the kernel image

I'm assuming he knew what it meant.. but what's fixed or?
Sent from my SPH-D700 using XDA

dr4stic's Experimental Build FunHouse! (CM10, CM9, m0R3?) for T769 and others, Oh My!

Hi guys,
I seem to have a need to run experimental builds. And since I turned the other thread into an official CM10 thread (stupid of me, I know), I thought I'd create this one to run experimental builds on.
What constitutes an experimental build? Well... mostly tweaks to our device profile. Turning on and off features we do or don't have on the phone. Maybe I'll try experimental AOKP or other releases, but most importantly:
I DO NOT TAKE REQUESTS!
Please don't ask for things that really should be mods and handled in the Themes and Apps section. You'll just be annoying me and cluttering the thread.
Please see the second post for misc. things I'm working on.
Also, be nice to all posters... even the [email protected] This is the Android Dev section and I'd like to see a certain level of decorum. We only get better by rising above.
AS ALWAYS, VERIFY ALL MD5 SUMS BEFORE INSTALLING.
ALSO, IF YOU FIND SERIOUS (or even minor) WEIRDNESS, PLEASE DO A FULL WIPE AND VERIFY BEFORE REPORTING!
Thanks

So, I talked to some guys, and I'm hoping the following kernel soves some of the SoD issues people have been having. Folks, PLEASE remember that you need to run this for at least a day or two without rebooting your phone on purpose. If it crashes out or reboots on it's own, that's a different story. I need this to be more of a long term test. As soon as I can confirm this works, I'll get it patched and submitted to official.
CM10 2012-11-11 Build. SoD Fix Attempt 1: boot-cm10.t769-noSoD.zip - 6.89 MB (Dirty flash OK, no need to wipe dalvik)
NOTE!!!
Sometimes I'll mention I uploaded a build. It takes about 25-30 minutes for me to upload a 160MB file. So if you don't see a file immediately, give it a half hour and come back.
Cleanup...
Unless there are any objections, I'll be removing the following files from my dev-host account, as well as older builds:
T769 - CM9 Experimental build, 10/25 Latest: cm-9-20121025-UNOFFICIAL-t769.zip - 137.16 MB
T769 - CM9 Kernel Flash for 10/30 build, Random WiFi MAC Fix: boot-kernel-cm9-wireless-mac-fix-20121030.zip - 6.99 MB
T769 - CM10 Experimental build, 10/24 Latest: cm-10-20121024-UNOFFICIAL-t769.zip - 159.47 MB

dr4stic said:
OK, so, first things first. I've run a basic build of CM9. I'd love to know if you guys find this stable or not. This has my kernel modifications against the kernel that it originally came from (3.0.8). The device setup is very similar to CM10 so setting up and running a build was not difficult.
CM9 Experimental build, 10/18 Latest: My CM9 builds for blaze
Click to expand...
Click to collapse
Sure I'll test now! Is BLn working? Just curious

chjema said:
Sure I'll test now! Is BLn working? Just curious
Click to expand...
Click to collapse
I works, though wonky.
BLN was wonky in CM9, that's just how it was. In fact, when talking amongst the devs about doing a CM9 build, the dude that was responsible for the BLN stuff said "don't forget CM9 has the wonky BLN" ... yeah. It's the same experience as from CM10.
The CM10 implementation is supposed to be cleaner, but the rewrite was so extensive that it is killing me to try to work support for us back into it. In fact, the CM10 very of our build uses the CM9 driver, until I can finish my port.
So, yeah, the BLN will be the same as in the CM10 release.

dr4stic said:
I works, though wonky.
BLN was wonky in CM9, that's just how it was. In fact, when talking amongst the devs about doing a CM9 build, the dude that was responsible for the BLN stuff said "don't forget CM9 has the wonky BLN" ... yeah. It's the same experience as from CM10.
The CM10 implementation is supposed to be cleaner, but the rewrite was so extensive that it is killing me to try to work support for us back into it. In fact, the CM10 very of our build uses the CM9 driver, until I can finish my port.
So, yeah, the BLN will be the same as in the CM10 release.
Click to expand...
Click to collapse
No worries! Ill disable it anyways and go through my Test checklist on this bad boy. Post here? Or you wanna make a Q&A?

dr4stic said:
I works, though wonky.
BLN was wonky in CM9, that's just how it was. In fact, when talking amongst the devs about doing a CM9 build, the dude that was responsible for the BLN stuff said "don't forget CM9 has the wonky BLN" ... yeah. It's the same experience as from CM10.
The CM10 implementation is supposed to be cleaner, but the rewrite was so extensive that it is killing me to try to work support for us back into it. In fact, the CM10 very of our build uses the CM9 driver, until I can finish my port.
So, yeah, the BLN will be the same as in the CM10 release.
Click to expand...
Click to collapse
I have the rom downloaded and can test tonight if need help. Just let me know
Sent from my SAMSUNG-SGH-T769 using xda app-developers app

flyers00 said:
I have the rom downloaded and can test tonight if need help. Just let me know
Sent from my SAMSUNG-SGH-T769 using xda app-developers app
Click to expand...
Click to collapse
It should be fairly vanilla CM9, except based on my sources rather than TFQ's. I'm hoping I can get some feedback on stability and features (other than BLN) because I'm curious about the comparison to CM10. Also, because an official build of CM9 might go a long way towards making people happier about their CM experience while CM10 goes through it's growing pains

dr4stic said:
It should be fairly vanilla CM9, except based on my sources rather than TFQ's. I'm hoping I can get some feedback on stability and features (other than BLN) because I'm curious about the comparison to CM10. Also, because an official build of CM9 might go a long way towards making people happier about their CM experience while CM10 goes through it's growing pains
Click to expand...
Click to collapse
Thanks for the explanation about the sources. I can live without bln and test everything out.
I couldn't agree more, a stable official cm9 would calm everybody down about cm experience. I have been using cm roms for the past 4 years.
Keep up the good work
Sent from my SAMSUNG-SGH-T769 using xda app-developers app

chjema said:
No worries! Ill disable it anyways and go through my Test checklist on this bad boy. Post here? Or you wanna make a Q&A?
Click to expand...
Click to collapse
Post here... I kinda regret making the Q&A for the other thread. I'm fairly certain I'm a little ADD and have a limitted attention span

I flashed the rom and everything seems to be working fine. Only thing I noticed is volume is low during music playback . Volume controls work as expected. I'll continue to run this and see if anything comes up.
Sent from my SAMSUNG-SGH-T769 using xda app-developers app

Where is the volume low? Headphone or speaker phone?

dr4stic said:
Where is the volume low? Headphone or speaker phone?
Click to expand...
Click to collapse
Volume seems low with speaker. Using Apollo player. Tune in and Pandora are louder
I'm also using the bln app and lights are working fine. No fc errors or crashes.
The rom seems pretty stable.
Sent from my SAMSUNG-SGH-T769 using xda app-developers app

flyers00 said:
Volume seems low with speaker. Using Apollo player. Tune in and Pandora are louder
I'm also using the bln app and lights are working fine. No fc errors or crashes.
The rom seems pretty stable.
Sent from my SAMSUNG-SGH-T769 using xda app-developers app
Click to expand...
Click to collapse
Stable enough to be official? Also, have you tested the torch (flashlight)? Are you still running it?
As for the volume, you say Tune in / Pandora are better... are they better as in correct, or just better as in not as low as apollo?
Is anyone else using the CM9 release?

dr4stic said:
Stable enough to be official? Also, have you tested the torch (flashlight)? Are you still running it?
As for the volume, you say Tune in / Pandora are better... are they better as in correct, or just better as in not as low as apollo?
Is anyone else using the CM9 release?
Click to expand...
Click to collapse
I'm still running it, everything seems to be working . My opinion very stable
Tune in and Pandora are not as low as Apollo. I really only stream music on phone as opposed to using a music player. So the Apollo thing might be normal. I also tested the torch/flashlight and it worked fine
Did anyone else report back on the rom?
Sent from my SAMSUNG-SGH-T769 using xda app-developers app

I would say it stable enough for official release.
Sent from my SAMSUNG-SGH-T769 using xda app-developers app

flyers00 said:
I'm still running it, everything seems to be working . My opinion very stable
Tune in and Pandora are not as low as Apollo. I really only stream music on phone as opposed to using a music player. So the Apollo thing might be normal. I also tested the torch/flashlight and it worked fine
Did anyone else report back on the rom?
Click to expand...
Click to collapse
flyers00 said:
I would say it stable enough for official release.
Click to expand...
Click to collapse
Thanks! Yeah, no one else reported back on it. I think I may have found the volume issue. Looks like I may have missed some things in the kernel. Gonna finish building some new patches tonight, so we'll see. With any luck, by the end of the day we'll have a stable CM9 where the sound is what it should be, and I577 will have a CM9 that doesn't spin like a top
And... this might help towards some sound stuff that was just reported for the CM10 build as well.

dr4stic said:
Thanks! Yeah, no one else reported back on it. I think I may have found the volume issue. Looks like I may have missed some things in the kernel. Gonna finish building some new patches tonight, so we'll see. With any luck, by the end of the day we'll have a stable CM9 where the sound is what it should be, and I577 will have a CM9 that doesn't spin like a top
And... this might help towards some sound stuff that was just reported for the CM10 build as well.
Click to expand...
Click to collapse
That's good news and sorry no one else checked in with you.
If you need help later, let me know. Glad the volume is correctable with kernel fixes. Good job with work done so far
Sent from my SAMSUNG-SGH-T769 using xda app-developers app

flyers00 said:
That's good news and sorry no one else checked in with you.
If you need help later, let me know. Glad the volume is correctable with kernel fixes. Good job with work done so far
Sent from my SAMSUNG-SGH-T769 using xda app-developers app
Click to expand...
Click to collapse
Hah! Don't get too excited... I may have been wrong

Sorry to be late guys.... This rom is probably the most stable rom out there for ics.... the only drawback is the music playback from the speakers... the headphones seem to work perfect even with apollo. Also with amazon mp3 player.. Very smooth, fluid. Feels very fast. But I noticed one glitch in any app if I close the status bar real fast I see like half of the screen flash black. To reproduce this glitch you can just open messaging: pull down the bar, let it go, then real fast drag it to the top......

Glad to hear you guys are having a good experience with this build. With any luck, it'll be "official" early next week.
I loaded a new kernel into my CM9 builds area (see second post). Please load that one up as it's what will ultimately be pushed. If I could get a day or two's worth of feedback, I'd appreciate it. It's OK to dirty flash. You can wipe dalvik if you like.
I loaded some music on my test phone and, honestly... I'm not sure how loud it's supposed to get. The volume didn't change with the final kernel patching I did. Though, the other kernel's volume seems fine to my ears You're talking about the speakerphone, right?
My test music sounded fine to me... maybe I'll load up CM10 and see if there's a difference.
EDIT: loaded CM10 and volume levels seem the same to me. . o (you can get with this... or you can get with that...)

[Q&A] Slimbean 4.2.2

you all know the drill. let's keep the dev thread clean.
sent from within the beast

@[email protected]
soo? wifi is still borked? as cm10.1 bugs?
oh men!

PuNeTZzZ said:
soo? wifi is still borked? as cm10.1 bugs?
oh men!
Click to expand...
Click to collapse
Since I put cm10.1 bugs and you haven't sent me a fix I'd say yea still borked
Sent from my Galaxy Nexus using xda premium

Wifi's not working!!! How to fix?!?

Ninhnguyenz said:
Wifi's not working!!! How to fix?!?
Click to expand...
Click to collapse
Easy,
First, relax
Second, grab my source and fix it.
Three, rebuild the kernel and flash it.
Sent from my Galaxy Nexus using xda premium

Beastmode said:
Easy,
First, relax
Second, grab my source and fix it.
Three, rebuild the kernel and flash it.
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
Could you please be more specific!!! I'm not a developer, kinda new to this android stuff...so your source to me is like... matrix.
Oh! and one more thing. don't know if it's just me but, the nova launcher sometime get really laggy, sometime don't.

What beast is saying is that if you guys aren't going to help with the kernel, nagging him about its issues makes you look like entitled children. (no offense to anyone here)
He is not being paid to do any of this. So when you say stuff like "wifi isn't working still??" it makes you come off as entitled and demanding.

PuNeTZzZ said:
seriously?
grab my source and "fix it". & "rebuild the kernel" and flash it.
whew! look's like trolling XD
Click to expand...
Click to collapse
Trolling or being honest? If I had a WiFi fixed I would put it out ..I'm known for not keeping ROMs in the dark for long.
If you consider it trolling then report my post but what I said was the truth the only WiFi fix is for someone to fix it themselves because I'm busy and running low on ideas.
Sent from my Galaxy Nexus using xda premium

Ninhnguyenz said:
Well! if you have to do something. do it right. if not, then don't. i'm just pointing out the problem so the guy know and fix it.
As a newbie that's all i can help.
Click to expand...
Click to collapse
Lol seeing as how this is a developer website and the ROM says the bugs are there then I can put out the rom as I please you don't have to flash it.
Sent from my Galaxy Nexus using xda premium

This is an awesome ROM but I have been wondering why is WiFi always the thing that needs to be fixed?
Sent from my SGH-T999 using xda app-developers app

PuNeTZzZ said:
the trolling i was mentioning is
you said how to fix it but he is not a developer so he could not do it by himself...
i know that, that is the way to fix it even if i iam not a developer... so i notice that it is too hard for him to do that so i called it Troll..
PEACE sir!
Click to expand...
Click to collapse
I'm not a developer but I wanted progress so instead of being douchy and just posting unintelligible babble I decided to teach myself as much as I could about kernel building and voila you're now running JB.
So not being a dev isn't an excuse so far as I know I'm a senior member with ROMs out because I googled my issues and read. Have a good night bro maybe you should read up and post fixes and not these types of replies because if you look back he came almost demanding a fix with all the exclamation and questions marks.
Sent from my Galaxy Nexus using xda premium
---------- Post added at 11:36 PM ---------- Previous post was at 11:35 PM ----------
mattoaida said:
This is an awesome ROM but I have been wondering why is WiFi always the thing that needs to be fixed?
Sent from my SGH-T999 using xda app-developers app
Click to expand...
Click to collapse
Because you've only tried the 4.2.x ROMs since anything 4.1.x and prior has perfect WiFi
Sent from my Galaxy Nexus using xda premium

Ninhnguyenz said:
Okay! this is frustrating... Since wifi doesn't work i re-flash it with the old ROM. and now, wifi refuses to turn on
But. the funny thing is. the Galaxy s 4G setting which was not working before.... now works... Weird.
Click to expand...
Click to collapse
Make sure you do a factory reset and wipe the /system partition too before you reflash to ensure that anything left over from the previous rom is gone.

Thread Cleaned,
Folks, the OP is here to get your assistance in the development and furthering of such development. Posting arguments about feelings getting hurt is a colossal waste of time and is a huge distraction.
If your feelings are hurt by what is said in the posts,, then there isn't much to do that move on to something else.
"Being respectful is paramount" -- Contribute or move on. Any more childish stuff and I will close thread.

Erik, thanks for another rom to play with. Keep up the great work!

This rom was amazing. But I had to go back to Cm9. And beast any way we can put the splash screen in cm9 it looks dope xp
Sent from my SGH-T959V using Tapatalk 2

seedpws said:
Does call recording work in this rom?
Click to expand...
Click to collapse
From previous versions...recording was working, the issue was playback. I am sure the beast has gotten a few logs for that issue if not... let me know and I will get some up.
on the side of been demanding. I'm ducking now to avoid all the stuff that is about to be thrown my way but.....I hate apollo and I was wondering if the walkman app and the dark gapps are compatible with Slim bean. Just asking I am willing to crash my phone in the attempt to find out

suck it monkeys said:
From previous versions...recording was working, the issue was playback. I am sure the beast has gotten a few logs for that issue if not... let me know and I will get some up.
on the side of been demanding. I'm ducking now to avoid all the stuff that is about to be thrown my way but.....I hate apollo and I was wondering if the walkman app and the dark gapps are compatible with Slim bean. Just asking I am willing to crash my phone in the attempt to find out
Click to expand...
Click to collapse
What do you mean recording works but playback is the issue? I just want to know if I can install a program to record my calls with this rom. Stock rom it would record 2-way calls. With cynogen9 it doesn't record anything they are blank files.

suck it monkeys said:
on the side of been demanding. I'm ducking now to avoid all the stuff that is about to be thrown my way but.....I hate apollo and I was wondering if the walkman app and the dark gapps are compatible with Slim bean. Just asking I am willing to crash my phone in the attempt to find out
Click to expand...
Click to collapse
Walkman should work if you just install it through PMR. Dark GApps... I wouldn't trust unless you found dark SlimGApps. Regular GApps would likely cause similar issues with weird bloat and random FCs.

Bug list
Apparently the bug list is too recursive for some. lol
10.1 Bugs
Same as 4.1.2
WiFi stays on searching for networks
Camcorder now records but videos don't play back correctly.
4.1.2 Bugs
Bln is borked
Camcorder doesn't work (see above)
gPS no worky lol
Great work erickmm! Thanks button hit. I wish I could pull the trigger on this one because I loved SlimICS. Only phone I have and I need the GPS...

Click ME for something cool lol

[Leak] 4.2.2 leaks for International S3

MOD EDIT: DO NOT FLASH THE FILE IN THAT ARTICLE, IT IS FOR INTERNATIONAL S3 ONLY!
I can't wait to see what the ROM devs do with this!
Includes some of the non hardware based goodies that the S4 has.
" New features include a familiar array of lock screen widgets and unlock effects, new display modes, a re-tooled quick settings area in the notification pull-down, a new driving mode and an updated version of the S Voice assistant app. Some of the headline Galaxy S4 features like "Air view" hover-touch abilities aren't included -- that's because they're dependent on the S4's internal hardware."
http://m.androidcentral.com/samsung-galaxy-s3-android-422-firmware-leaked-galaxy-s4-features
Mods: if this is in the wrong area, please move.
Rob Storm

Rob_Storm said:
I can't wait to see what the ROM devs do with this!
Includes some of the non hardware based goodies that the S4 has.
" New features include a familiar array of lock screen widgets and unlock effects, new display modes, a re-tooled quick settings area in the notification pull-down, a new driving mode and an updated version of the S Voice assistant app. Some of the headline Galaxy S4 features like "Air view" hover-touch abilities aren't included -- that's because they're dependent on the S4's internal hardware."
http://m.androidcentral.com/samsung-galaxy-s3-android-422-firmware-leaked-galaxy-s4-features
Mods: if this is in the wrong area, please move.
Rob Storm
Click to expand...
Click to collapse
4.2.2 has been on AOSP for awhile now..
Sent from my SCH-I535 using xda app-developers app

Deliquified said:
4.2.2 has been on AOSP for awhile now..
Sent from my SCH-I535 using xda app-developers app
Click to expand...
Click to collapse
I'm pretty sure that everyone knows that already. Although thank you for pointing it out.
While AOSP is more cutting edge, I like simple functions like Bluetooth volume working correctly as it does on TW.

Rob_Storm said:
I'm pretty sure that everyone knows that already. Although thank you for pointing it out.
While AOSP is more cutting edge, I like simple functions like Bluetooth volume working correctly as it does on TW.
Click to expand...
Click to collapse
Works just fine on ktoonsez's kernel.. Just used it earlier today.
Sent from my SCH-I535 using xda app-developers app

Deliquified said:
Works just fine on ktoonsez's kernel.. Just used it earlier today.
Sent from my SCH-I535 using xda app-developers app
Click to expand...
Click to collapse
I have it on my other S3, along with ktoonsez's kernel. While the volume seems to be acceptable, I still get the static and clicking every now and then.
This post is not to compare TW with AOSP, some do like TW based roms.
Rob

Rob_Storm said:
I have it on my other S3, along with ktoonsez's kernel. While the volume seems to be acceptable, I still get the static and clicking every now and then.
This post is not to compare TW with AOSP, some do like TW based roms.
Rob
Click to expand...
Click to collapse
I'm saying ktoonz does have a tw version of his kernel if that's what you prefer. You could try using the ViPER4Android app and mess with the settings to clean that up. I'm sure someone in that thread could point you to good settings. In not sure if fauxsound amplifies BT, but you could try that as well.
Sent from my SCH-I535 using xda app-developers app

Deliquified said:
I'm saying ktoonz does have a tw version of his kernel if that's what you prefer. You could try using the ViPER4Android app and mess with the settings to clean that up. I'm sure someone in that thread could point you to good settings. In not sure if fauxsound amplifies BT, but you could try that as well.
Sent from my SCH-I535 using xda app-developers app
Click to expand...
Click to collapse
Your previous posts were pointing out that AOSP was already at 4.2.2.
I must admit, I'm a bit confused.

Rob_Storm said:
Your previous posts were pointing out that AOSP was already at 4.2.2.
I must admit, I'm a bit confused.
Click to expand...
Click to collapse
Just wanted to point you in the right direction to fix your Bluetooth issue either through ktoonz's touchwiz kernel, fauxsound app, or ViPER4Android app. You may need to tweak the settings a bit to your liking as i don't know how severe your issue is. Could be the phone hardware, a software issue, a rom issue, or the Bluetooth headset itself causing it. It's not something that's easy to troubleshoot online. Sorry if i lost you, I'm a bit sleep deprived. Sorry if I was vague or rude. On that note, bedtime. Hope you get your issue resolved.
Sent from my SCH-I535 using xda app-developers app

Deliquified said:
Just wanted to point you in the right direction to fix your Bluetooth issue either through ktoonz's touchwiz kernel, fauxsound app, or ViPER4Android app. You may need to tweak the settings a bit to your liking as i don't know how severe your issue is. Could be the phone hardware, a software issue, a rom issue, or the Bluetooth headset itself causing it. It's not something that's easy to troubleshoot online. Sorry if i lost you, I'm a bit sleep deprived. Sorry if I was vague or rude. On that note, bedtime. Hope you get your issue resolved.
Sent from my SCH-I535 using xda app-developers app
Click to expand...
Click to collapse
I've never had the Bluetooth issue with a TW ROM, only AOSP.
Thank you for the insight though. Get some rest.

So once the International version gets the official update, we can probably expect to see it 3 or 4 months later thanks to Verizon.

I just read that article and watched the video. Looks like aosp but with a few design tweaks. It would be nice if they just fixed the keyboard in the update. Ha
Sent from my SCH-I535 using xda app-developers app

I wish Verizon would leak more updates. Other phones I have had in the past had new roms almost every week. The Galaxy S3 has been a big disappointment in factory updates, released hardware, and support. Once Samsung neglected to release a decent wireless charge option and Verizon cold shouldered its users, I don't think I'll go back to Samsung. I miss my HTC.

BungeBash said:
I wish Verizon would leak more updates. Other phones I have had in the past had new roms almost every week. The Galaxy S3 has been a big disappointment in factory updates, released hardware, and support. Once Samsung neglected to release a decent wireless charge option and Verizon cold shouldered its users, I don't think I'll go back to Samsung. I miss my HTC.
Click to expand...
Click to collapse
I was looking into inductive charging. Verizon apparently offers a cover....but I can't find it.
Ha and yea the Verizon variant might see this update in September or November and it will most likely have all the cool things removed.....it's almost like they want everyone to root their phones
Sent from my SCH-I535 using xda app-developers app

And that's why we root our S3's!
Sent from my SCH-I535 using Tapatalk 2

detonation said:
So once the International version gets the official update, we can probably expect to see it 3 or 4 months later thanks to Verizon.
Click to expand...
Click to collapse
That's an awfully optimistic time frame.........lol - guessing more like 6 months if at all. Still waiting on that premium suite.

Hobson318 said:
That's an awfully optimistic time frame.........lol - guessing more like 6 months if at all. Still waiting on that premium suite.
Click to expand...
Click to collapse
At this point I'm willing to bet they will save both for one update
Sent from my SCH-I535 using xda app-developers app

Im glad to see the mod edit. I was wondering who would be the first to flash it and super concrete brick their device.
Sent from my SCH-I535 using xda app-developers app