Related
So the crackflashers have done it again - Gingerbread is now on the Desire / Bravo
Based on CM 7 Source
Thanks to Cyanogen, #teamdouche and @gridlock32404 (Thatguy32404) - These are unoffical builds based on their code as such..
Code:
These builds have nothing extra added, they are just like the usual
"nightly" builds. There is no support provided, this is just a hobby and
I thought I would share. If you don't know how to flash a unofficial build,
don't want possible bugs or don't like living on the edge, go away!
Do a nandroid backup first!
OK so here is how to get it up and running:
Step 1 - Download the latest build from http://www.crackflashers.com look in the builds folder for the latest file - The build will increment by 1 each time there is a new build so if there is one there greater than b#29 download it << In case I don't get the thread updated at the same time
Step 2 - Download the Gingerbread apps from NEEDS UPDATED TO POINT TO DESIRE / BRAVO. crackflashers.com/ace/[/URL] look in the google-apps folder for the file gingerbread-gapps-12302010.zip
Step 3 - Place all these files onto your sd card reboot into recovery
Step 4 - Flash the files using the install zip from sdcard option (do the rom first then the gapps)
Step 5 - Reboot phone and enjoy the Gingerbread goodness
Current Issues
Current Issues
#17 - APN list may be empty and you will need to manually enter this - a complete list can be found at http://code.google.com/p/cyanogenmo...orum.xda-developers.com/show...&postcount=271 for resolution
does it can be use with n1 table hboot?so, you will update nightly?
anyway, nice work!
nice work, will surely give it a try
any benchmarks?
najar360 said:
does it can be use with n1 table hboot?so, you will update nightly?
anyway, nice work!
Click to expand...
Click to collapse
Check out the N1 thread http://forum.xda-developers.com/showthread.php?t=883605
I only tested it and maintain the thread - the guys above deserve the kudos
gilmorenator said:
Check out the N1 thread http://forum.xda-developers.com/showthread.php?t=883605
I only tested it and maintain the thread - the guys above deserve the kudos
Click to expand...
Click to collapse
how bout a2sd+?does it work with dark tremor or firerat?
edit : confirm can't use with firerat.
najar360 said:
how bout a2sd+?does it work with dark tremor or firerat?
Click to expand...
Click to collapse
This is the first build that I actually made for the desire so to say we don't exactly know what other additions made outside the source/gingerbread will or won't work. The only way to try is to make a nandroid backup after you flash this in and try it
Ps. The new recovery image is not supported in rom manager so everything will need to be done in the recovery manually even thought the code of the recovery is made by koush it is not an official release by him at all, just built from it. it is the only recovery currently that can handle ext 4 /system partion that cm7 source is based on.
You will not be able to restore a pre-cm7 source build on this recovery or flash a pre cm7 rom on it either (hence the backup recovery.img if you decide to go back) you can backup and restore any cm7 source rom on this recovery
Yes the new recovery is needed to flash gapps and newer updates as they become availible.
This is on the list of many devices I am compiling for. Currently g2, mt4g, evo4g, droid, desire hd, desire and sometimes the n1. If you can't seem to find an answer to something there is a good chance you will find it in one of those sections. Just look for posts from me
Sent from my HTC Vision using XDA App
Thatguy32404 said:
This is the first build that I actually made for the desire so to say we don't exactly know what other additions made outside the source/gingerbread will or won't work. The only way to try is to make a nandroid backup after you flash this in and try it
Ps. The new recovery image is not supported in rom manager so everything will need to be done in the recovery manually even thought the code of the recovery is made by koush it is not an official release by him at all, just built from it. it is the only recovery currently that can handle ext 4 /system partion that cm7 source is based on.
You will not be able to restore a pre-cm7 source build on this recovery or flash a pre cm7 rom on it either (hence the backup recovery.img if you decide to go back) you can backup and restore any cm7 source rom on this recovery
Yes the new recovery is needed to flash gapps and newer updates as they become availible.
This is on the list of many devices I am compiling for. Currently g2, mt4g, evo4g, droid, desire hd, desire and sometimes the n1. If you can't seem to find an answer to something there is a good chance you will find it in one of those sections. Just look for posts from me
Sent from my HTC Vision using XDA App
Click to expand...
Click to collapse
thanks for explanation. anyway i try firerat and it failed. not yet try with dark tremor.
question, if i use current recovery such amon ra or previous clockworld, is it give diff outcome?
najar360 said:
question, if i use current recovery such amon ra or previous clockworld, is it give diff outcome?
Click to expand...
Click to collapse
You may flash the ROM with your current recovery but you won't be able to flash GAPPS - making it a bare rom
Sent from my HTC Desire using XDA App
Sorry to get your hopes up guys, the code for the cm parts is there in the source and was all good to be added in but what the main code (not just the app but the framework parts of it) were removed till implemented. Still a build 13 coming shorty. It is compiling but will be missing the cm parts
Sent from my HTC Vision using XDA App
Build 13 is up, has gps fixes and other things. Too tired to list all changes check @cmsrc on twitter or github for what's been added
Sent from my HTC Vision using XDA App
deleted.....
woa.. just another cyanogen copy
For those having problems with Gapps on newer htc phones like g2, mt4g and desire hd try the new gapps I have posted up at http://gridlock.euroskank.com and grab the EMMC ones
Everyone else can grab the MTD gapps
This should remove having to mount /system in recovery but run fix permissions in the advanced section of the recovery just in case
Sent from my HTC Vision using XDA App
Midian666 said:
woa.. just another cyanogen copy
Click to expand...
Click to collapse
It isn't one bit at all a copy, just doing the service of basicly compiling the cm7 source just like a nightly untill buildbot is back building them (should be after a official rc1 release) and sharing
Sent from my HTC Vision using XDA App
Build #14 will be up on http://gridlock.euroskank.com within minutes. This should have a fix for data, if so thanks to phunkycow for the fix
Sent from my HTC Vision using XDA App
nice... auto-nightly builds of cm7... how i missed that
whats cwm3 originate from? is there also a changing codebase, or is this a static build, which wont change at all?
mad-murdock said:
nice... auto-nightly builds of cm7... how i missed that
whats cwm3 originate from? is there also a changing codebase, or is this a static build, which wont change at all?
Click to expand...
Click to collapse
There isn't any nightlies that I know of! Cwm3 is the recovery that is in the cm7 source code and it builds a recovery for the device that you compile for. Only when someone changes something in the recovery does it change
Sent from my HTC Vision using XDA App
Why are we unable to flash G-Apps with older recoveries?
Thanks for the effort, it's great to see some progress on this front!
bemymonkey said:
Why are we unable to flash G-Apps with older recoveries?
Thanks for the effort, it's great to see some progress on this front!
Click to expand...
Click to collapse
Once you flash a cm7 source based rom the system becomes ext4, other roms/cm6 are only ext 4 so in order for the /system to mount in recovery for making nandroid backups or to flash anything it needs to have a recovery that can support ext4, which currently is the recovery posted with these builds which is based on clockworkmod recovery because koush hasn't released a official recovery yet (also since it is unofficial rom manager does not support it, so everything has to be done manually in the recovery)
Sent from my HTC Vision using XDA App
Hey all. Been a while since my last release of s3vo for the evo which was sense based, but I really wanted to start learning android and have a better perspective of it. I decided to dig a bit more into compiling android. Started horsing around with github and learned to start compiling my own builds from aosp wih the help from cmsrc, evervolv, and a few others githubs. Since the release of gingerbread to aosp, i moved away from sense. There are things that i do miss about sense, but the usability of the phone without it is just unmatched imho. Many people use or have used cyanogenmod. IMHO is a great open source project that has some of the best devs out there. I have always been more into the 'vanilla' look opposed to the themed and aftermarket. Recently i have been compiling gingerbread for the evo and mt4g and have had nothing but the best reviews. Basically the reason why i am here. Wondering if there was any interest in a few of my builds. Main reason from moving away from CM6/7 (cyanogenmod), ADW launcher and the extra added bloat and themes. Currently as i look at my phone, my battery stats have me at 31 hours and counting with 15% left. So battery life as you can tell was one of my main concerns. Everything works!!!
1.3 build is based off 2.3.7. (Thanks cm team) and cm kernel 2.6.37.6 (thanks cm team). And YES it has Wimax AND HDMI Mirroring. (thanks teamwin)
gingerbread-evo-deck-1.2(x) - 2.3.4 Video - Thanks Dash
1.2.1 build is based off 2.3.4. (Thanks cm team) and cm kernel 2.6.37.6 (thanks cm team). And YES it has Wimax AND HDMI Mirroring. (thanks teamwin)
gingerbread-evo-deck-1.2(x) - 2.3.4 Video - Thanks Dash
1.0 build is based off 2.3.3. (Thanks cm team) and cm kernel 2.6.37.4 (thanks cm team). And YES it has Wimax AND HDMI Mirroring. (thanks teamwin)
gingerbread-evo-deck-1.0 - 2.3.3 Video - Thanks D/\SH
There is *nothing* that doesnt work anymore on 1.0. If an app that you are used to using from a 2.2/sense rom doesnt work, chances are that app hasnt been recompiled for gingerbread. Please bug the app author and not me
*!* By downloading any files, ROMs, and or apks, you verify that you have the appropriate licenses for all software contained within *!*
l assume no responsibility for any damage you may cause to your phone.
Before flashing your phone, please make sure you are completely rooted.
For information about rooting, please go to:
[ROOT] ~~~ HTC EVO - Universal Auto Root ~~~ v2.3 (works with all version)(2/13/11) - xda-developers
After flashing your phone, please make sure you update to the latest radio, wimax, nv, and pri:
For information about updating your radio, wimax, nv, and pri, please go to:
[ Radios ][ 12-17 ] All EVO Radio, WiMAX, PRI, NV & HBoot versions - xda-developers
Special Thanks to: CyanogenMod Team, and Team Win, where most of the source came from, preludedrew and evervolv team, which helped me tremendously get my feet off he ground with android. And the originals, Calkulin, No2Chem, GGuruUSA, Colonel00, Conflipper, AstainHellbring, LennySH, NexVision, CLHatch, Chainfire, JooJooBee666, and Polargoat for putting up with me for many years and always helping me out.
Donations are VERY much appreciated.
Want to donate but dont have any extra money? Check out some of our site's sponsors at http://www.dev-host.org
[size=+1]For updates, news, and my gibber jabber, please follow me @kushdeck on twitter..[/size]
[size=+1]We now have an irc channel. Please join us @ #dev-host on freenode..[/size]
*New Downloads* Please help support your dev, check out our site's sponsors. Thanks.
gingerbread evo 1.3 Stable
gapps 8-28-2011
gapps 8-28-2011 with Voicemail.apk
[size=+1]*Official thread and ALL Downloads*[/size]
[size=+1]*Issue Tracker*[/size]
[size=+1]*Changelog*[/size]
*Install Instructions*
1. Reboot into recovery. I use Amon's recovery.
2. *optional* make a nandroid backup.
3. Wipe Everything.
4. Flash gingerbread rom zip.
5. DO NOT REBOOT YET.
6. Flash gapps zip.
6a. Flash Kernel *if you are using a custom kernel as Tiamat or Savaged-Zen*
7. Reboot.
8. Enjoy gingerbread!
Enjoy,
-deck
*reserved*
Thanks Deck!
good looking out!! hey does the GPS work? because i tried yours last week and i notice i had problems with it...
double post
Sweet a official thread!!!
so long fixer!
chiefs72 said:
good looking out!! hey does the GPS work? because i tried yours last week and i notice i had problems with it...
Click to expand...
Click to collapse
no, your phone has trouble with it. gps works for 9 out of 10 people, maybe even 9.5
i thought it was about time to make an official thread. trying to read the other 2 here was getting out of hand
-deck
great work deck! just flashed, so clean! kinda sexy even!
a2sd?
does this support a2sd?
Admiral2145 said:
does this support a2sd?
Click to expand...
Click to collapse
not built in yet.
-deck
Kushy w the win
Evo 4G -> Nexus S 4G
Full wipe coming from cm?
Sent from my PC36100 using XDA Premium App
Finally, go kush! Best rom ftw
Sent from my PC36100 using XDA Premium App
mkeena0305 said:
Full wipe coming from cm?
Sent from my PC36100 using XDA Premium App
Click to expand...
Click to collapse
Full wipe always recommended when comming from a different rom.
Finally an official thread, hey deck is mms fully working on v1.2b?
Always used your ROMs back when I had a TP & TP2, so I know this will be as good as your past ROMs!
EVO on Tapatalk
Awesome ROM very fast!
Sent from my decked PC36100 using Tapatalk
Does this ROM have the same issues as the other 2.3.4 builds like no MMS and 4g always bring turned on aftet a reboot?
Chris
Lrod0175 said:
Finally an official thread, hey deck is mms fully working on v1.2b?
Click to expand...
Click to collapse
I flashed v1.2b over 1.1 and MMS is working perfect for me, i hope that helps
Works perfectly for me. Running 1.2b with SZ kernel. The only minor issue so far is battery indicator. When charging, the light turns green at 90% (I am aware that is still charging =))
MINOR UPDATE (5/14) Temporary link added; fixes LatinIME.apk (keyboard misspelled everything); adds temporary fix for UMS (mounts only internal storage.)
MAJOR UPDATE (5/13) WiFi is now working; mounts are correct (thanks MIUI SCottland); vibration is now properly working; to get themes to work make a folder called "theme" in /data/system; MIUI Scotland and I are working together to get this in better standing so, stay tuned!
UPDATE: In the next few days I will be attempting to get MIUI Scotland's attention to this project. I will also ask a few devs around here I know, for help. If any of those sources can not help me I will be forced to stop this project due to my up and coming graduation and future responsibilities.
I'd appreciate it if you would read the whole post .
Hey everyone!
I have managed to port MIUIv4 to our device and I am in need of some serious testers. This ROM was built using the fascinate's 2.5.4 (latest) official MIUI build, so you can expect it to be as vanilla MIUI as possible.
As of now this is what I know is not working:
1) Torch
2) Camera shows 5MP @ best.
3) Bluetooth - probably will never work in any CM9/AOSP based ROM.
4) USB/SD do not mount on a computer. (Temp. fix applied 5/14)
5) GPS - Any app that attempts to use it reboots the phone.
?) Can you find anything else?
Thanks to:
MIUI Scotland, trialsrider, Matt, Entropy512, jt1134, anycard, dman, nunhugger, and anyone else who has helped me in any way.
Temp Link
http://www.mediafire.com/?44c2vk3n46dror4
Reserved
Sent from my SGH-I997 using XDA
Pm sent
Sent from my SAMSUNG-SGH-I997 using XDA
Ooo ooo me me!!! Ive been waiting for miui v4 ill test!! Haha
Sent from my SGH-I997 using XDA
This is the fastest Ics rom we have. Keep up the amazing work!
Sent from my SGH-I997 using XDA
Me have link please?
Sent from my SGH-I997 using xda premium
V4 Testing
I'm on Miui 2.4.17 now. If it loads I'll give it a try. I like Miui, always seem to work for me.
[email protected]
Infuse Miui V4
Good package, I'm almost 70 and it flashed easly for me.
Went from Miui 2.4.17 , then I did every thing on the list twice. Just a habit I have from earlier flash’s.
Instructions:
1) Flash jt1134's recovery - if you already haven't.
2) Wipe data/factory reset
3) Wipe dalvik cache
4) Format /system
5) Install ROM
6) Reboot
7) Test & Report
Pulled battery for first boot, it stuck at MIUI logo. Pulled battery for second boot it loaded without a problem. Nice looking launch screen too.
From the original post---------------------
As of now this is what I know is not working:
1) Wifi - loops and loops
2) Torch
3) Themes
4) USB & SD card storage are all backwards - see for yourself.
5) Camera shows 5MP @ best.
6) System Updates option FC's - for obvious reasons.
7) Haptic feedback is very weak.
8) Bluetooth - probably will never work in any CM9/AOSP based ROM.
9) Reboot - Recovery, doesn't boot to recovery. (Recovery not lost)
10) Can you find anything else?
The above items are correct, and did the same on my Infuse. I can call and receive but the WIFI was missed. The build is on a good track and worth the time to flash. Looking forward to the next version.
I did get back to recovery from the three finger salute, for anyone that is worried about bricking their device.
The build is fast and fluid, good feel. Hope this helps
[email protected]
Yeas really hope someone can fix wifi soon!
Sent from my SAMSUNG-SGH-I997 using XDA
[email protected]
Plz email me the link. Wanna try this out. Looks promising. Will submit bug reports.
Sent from my SGH-I997 using xda premium
Dear Brother,
Can i get a link to this Miui4 magic? It would be an honor to test this baby out.
This would be the best rom if wifi hets fixed and the sdcards get swapped back (and mmaayybbe the torch cause of its integration into miui) but the wifi is the only killer that made me flash back to cm9...... Damn me and my noob skillz...... If only i could contribute
Sent from my Infuse on miui v4!!!!!!!!!!!
Waiting patiently for this magic
Sent from my SGH-I997 using XDA
hope can have a try,bro.
bumpity bump
I'm gonna be testing miui Scotland's build. Should be basicly the same correct?
Sent from my SAMSUNG-SGH-I997 using XDA
dustinhayes93 said:
I'm gonna be testing miui Scotland's build. Should be basicly the same correct?
Sent from my SAMSUNG-SGH-I997 using XDA
Click to expand...
Click to collapse
Yup.
theROMinator said:
Yup.
Click to expand...
Click to collapse
Sweet. Ill be using this as my DD until I encounter a serious bug, which hopefully is never ^_^
dustinhayes93 said:
Sweet. Ill be using this as my DD until I encounter a serious bug, which hopefully is never ^_^
Click to expand...
Click to collapse
report back
Nice! I said earlier if wifi was fixes it would be my daily driver...and it has! Will be flashing again after church
Sent from my SGH-I997 using XDA
Gummy for the SGS4G
***Read the Changelog and Bug tracker post below***
This is a port from Team Kick Ass based on the famous ROM Gummy and our CM9.
READ THE ENTIRE OP EVERY TIME!
As always, I am not responsible for anything you do. If you do not read the OP to the fullest, you will run the risk of damaging your device.
Changelog and bug tracker is in post 2
Download links are in post 3
Please use the Q&A Thread
Thanks to:
SUPER THANKS to Jt1134
daothanhduy1996
Team Gummy
Erik
bhundven
Team Acid
Fbis251
GFXMyst for the ftp host (hopefully **** will be faster now...lol)
The guy who donated a long time ago (don't know his name), but I didn't find out until the donation was rejected automatically by paypal
My wife
**FRESH or updating to Gummy 3.0.0**Install instrcutions:
Make a backup of all your data
Install CM7
Reboot to recovery
Format /cache, /data, /system
Install Gummy 3.0.0
Install gapps
Reboot
Wait 10 minutes
Enjoy
**UPDATE**Install instrcutions:
Make a backup of all your data using TB or something alike
Download GummyMutt to sdcard
Reboot to recovery
Format /system and /cache
Wipe dalvik cache
Install GummyMutt-x.x.x.zip
Re-install Gapps (If not you may have issues...)
Fix permissions
Reboot
Wait 10 minutes
Enjoy the Gummy!
Installing the test supplemental:
Download 3.2.1 supp.zip to sdcard
Reboot to recovery
Flash
Reboot, test and report
Bug Tracker and Changelog
Bug tracker
Same issues as latest CM9
Wired tethering not working
Low and inconsistant wifi/signal (You have to flash back to CM7, flash padded modem of choice, then reinstall Gummy)
Might have excessive battery drain issue on v3.2.1 (Test supplemental has been created to verify)
You tell me more...
CHANGELOG
GummyMutt 3.2.1 milestone 2
Reformated version number for easier tracking (x.x.x= build number.milestone.fixes/minor updates)
Fixed UMS in build thanks to daothanhduy1996
Added automatic su when connected to adb (if this causes extra battery drain, I will remove it in the next build)
GummyMutt 3.0.2 Milestone 2
More Lightning Zap tweaks
Fixed loss of su/root issue
Fixed Info in about phone to reflect correct version, etc
Flashes built in modem correctly
Reverted back to KJ6 padded modem
Signal seems to be better... let me know what you guys find because I really want to close out this issue...
Please check GPS... I have again messed up my /efs and don't want to fix it atm so I can't test...lol
Gummy 3.0.0 Milestone 1
Built from source with the help of Fbis251 and Team Acid repo
New Team Fah-Q (formaly known as Team Kick Ass) kernel
Lightning Zap built directly into kernel/ROM
Camcorder is fixed
Kids love the flying poptart cat with a rainbow coming out it's butt and boot sound so it is here to stay...lol
v2.1
Changed to FBis251 KD1 padded modem
V2 NEW BUILD
Fixed dps
Fixed FFC camera
Added camera bleepy sound back in (Don't ask me to change it to something else. You want something else, you can change it)
Settings don't fc when selecting storage
Added softkeys toggle (can be turned on/off in power toggle)
Bluetooth seems to be working with audio (was off and on) Please report any issues
Added more LZ tweaks
Raised dalvik heapsize to help with mattery issues.
Changed modem to KD1 to try and fix radio issues
Can't test Phone/SMS at the moment. Please report if there is a problem.
v1.2.2
Added Angry GPS
GPS seems to be working now
Removed exchange.apk
Wifi/signal issues seem more stable now
Added some Lightning Zap goodness to help with battery/performance.
Updated to latest CM9 kernel
Fixed SU binary/superuser.apk issues
Fixed bluetooth permission issues
Fixed networkstas permission issues with new kernel
Fixed Android Version (4.0.4)... thanks chastity
Trimmed it down by about 20mb by removing many audio/video files
Default ringtone should be fixed and set to my personal favorite (if you have previously set a ringtone that is no longer included, it might not default back to the one I have set... please report back)
I have noticed, that since restoring via google, I have a several perms errors with my apps. It is not a ROM issue, but a google issue. If you want those perms restored, you can try restoring the data from a backup (not recommended) or uninstall/reinstall the app. (I'm looking into other options.)
Update to the latest Gummy bootanimation/bootsound. Let me know what you think. I will revert back to the original if everyone begins to hate it like I did after the 10th reboot...lol
Download Links
GummyMutt 3.2.1 milestone 2.5
GummyMutt 3.0.2 milestone 2
GummyMutt 3.0.0.zip
GummyMutt-2.1.zip
I am almost finished with this ROM. After I complete the kernel and make some slight changes, as well as fix UMS, I will call this ROM complete and move on to the next project.
1st and I know what this is...good job thomas
Sent from my SGH-T989 using xda app-developers app
Q&A thread created http://forum.xda-developers.com/showthread.php?t=1745598
Sent from my SGH-T959V using xda app-developers app
Download links are up folks... ENJOY!
Thomas, check your pm's. Think you might like it. You can disregard the first one. If you have any questions, you know how to reach me.
sent from within the beast
droidmyst said:
Thomas, check your pm's. Think you might like it. You can disregard the first one. If you have any questions, you know how to reach me.
sent from within the beast
Click to expand...
Click to collapse
I saw it right after the upload to SF had finished...lol
I have an update I'm working on already and will use the ftp then... Thanks man!
thomas.raines said:
The guy who donated a long time ago (don't know his name), but I didn't find out until the donation was rejected automatically by paypal
Click to expand...
Click to collapse
Think that was me for Lighting Zap. :crying:
I try to donate to every dev that helps make my phone new again.
I'll see if I can resend the original, took something like 45 days to go back to my bank account.
Anyway, great rom. have to play with it some more. Hope this ends up being the new VB-FB rom...
here's a logcat
Hey Thomas here's a logcat of the camcorder not startinf . I hope it helps.
@bot24 I got a 404 error when I tried to open it... Use pastebin.com and send me link please
thomas.raines said:
@bot24 I got a 404 error when I tried to open it... Use pastebin.com and send me link please
Click to expand...
Click to collapse
http://pastebin.com/6RrcbY3Z
here you go I still hope it helps I don't know why 404'd on you.
Thanks. Seems to work fine. I had no problems with SU or keeping root. Data is working although it only reports 3G ???. When I do a speedtest it does give me app 10Mbit/s so something is funky.
The number of bars on the phone reception goes from 1-3 all the time even when I'm not moving. To be fair it could be my reception here at home. I'll know more later when I go to work.
Edit: I did try to re-install the kj6 modem and the bars went up to 4 (maybe others needs to do the same)
Thanks again
chastity said:
I did try to re-install the kj6 modem and the bars went up to 4 (maybe others needs to do the same)
Click to expand...
Click to collapse
I'm working on an update to fix wifi/signal issues, battery life (7 1/2 hours uptime and already dropped 13% is unacceptable for me...lol), fixing the su binary, some perms issues, and storage issues... Stay tuned folks!lol
I really like the default wallpaper, think you can upload it on here for me that would be awesome
P.s. awesome rom I used it for a couple hours, will probably revert back when you do another update.
Sent from my SGH-T959V using xda app-developers app
Thomas you are most likely having problems because gummy is based off of aosp not cm9..what base did u use to port it?
DnickDominic said:
Thomas you are most likely having problems because gummy is based off of aosp not cm9..what base did u use to port it?
Click to expand...
Click to collapse
I had to use CM9 due to kernel/ROM issues. But now that FB has updated his AOKP, I will be attempt a new build in the future. (The update that will be posted shortly, is NOT based on AOKP...)
Wait a tick... CM9 IS AOSP...
Oops... I screwed up in my own thread....lol
Download link for update is up...
CyanogenMod 11.0 for the Samsung Galaxy SII Skyrocket i727 is still in it's alpha stage.
Compiled from CyanogenMod 11 Nightlies source and will update them as they come out.
Flash at your own risk!
I'm not responisble if this bricks your device, it's very possible it can brick from being untested to power going out durning a flash which leads to a softbrick and is fixable by getting into download mode and using ODIN or Nandroid to restore. Please take every precaution when flashing new roms and backup!!!!
How To Install:
Switching to CyanogenMod 11.0 from another ROM:
- * Make sure you're running a proper working CWM Recovery 6.0.3.7 or newer if possible update it before you continue!
(Required)
- Download CM-11 build, Gapps and Radio on to your phone.
- Install Radio
- Wipe data/factory reset
- Flash CM 11
- Flash Gapps
- Flash SuperSU 1.69 or above if you wish to be rooted
- Reboot to system
- Don't report bugs related to ART or not wiping cache or using old data from titanium backup!
Upgrading from an earlier version of CyanogenMod 11.0:
- Download the updated CM-11 zip on to your phone at least 6.0.4.4 or above.
- Boot into recovery
- Flash CM-11
- Flash Gapps
- Flash SuperSU 1.69 or above if you wish to be rooted
- Reboot to system.
Downloads
Moderator Edit - Links removed pending approval/credits/permission...etc
Gapps
- Gapps 4.4 KitKat Download
SuperSU
- SuperSU XDA Link - Please download the installable zip and flash it per instructions.
Recovery
- CWM 6.0.3.7 Download
Radios
- AT&T Skyrocket UCMC1 XDA Link
Credits
+ CM Team [CM Source]
+ Flyhalf205 [Recovery]
If you are not mentioned and helped in some way please let me know thanks.
Sources
- CM Source
- Kernel Source
Please hit thanks and rate this thread 5 stars if this has helped you!
What works in this version?
- You tell me.
What don't work?
- You tell me.
Version Information
[Lastest Update] 11/29/2013
[Lastest Build] 11/30/2013
Reserved.
Been running good so far! Not a single problem I have encountered. Minus the already known bugs that are being worked on in the code. Thanks for building!
Sent from my SAMSUNG-SGH-I727 using XDA Premium 4 mobile app
two questions:
1. need to flash superuser standalone?
2. can i get info about machine you are building on?
Awesome glad its working as intended!
Only if you wish to have root and I built it on a laptop with a solid state hard drive i7 processor and 8GB of ram.
Sent from my HTC6435LVW using Tapatalk
Loving that new boot ani too.
Sent from my SAMSUNG-SGH-I727 using XDA Premium 4 mobile app
Thanks so much for this! It is day 2 of running and so far really good.
Can any of you post a list of what works and what don't work?
Example
List:
Bluetooth: ???
Calling: Works
Camera: Works
Camcorder: ???
Data: Works
GPS: Works
Messaging: Works
Multi-Media Messaging: Works
WiFi: Works
So if there are any bugs that have been fixed that we all know.
Bluetooth and WiFi don't work on my device so I can't test those but everything else works except for camcorder
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
I have WiFi just fine. .-.
Sent from my SAMSUNG-SGH-I727 using XDA Premium 4 mobile app
maxjivi05 said:
Can any of you post a list of what works and what don't work?
Example
List:
Bluetooth: ???
Calling: Works
Camera: Works
Camcorder:
Data: Works
GPS: Works
Messaging: Works
Multi-Media Messaging: Works
WiFi: ???
So if there are any bugs that have been fixed that we all know.
Click to expand...
Click to collapse
Yeah everything works except Bluetooth didn't work correctly when paired with my soundbar. Music wouldn't play with Apollo and when using Google play music, it ended up skipping a song I was listening to. I mention it before but it hasn't been fixed even on Cm10.2. Apollo and DSP manager acts up because of some cm merge and I have to launch and force close Apollo multiple times to fix it. I posted a logcat awhile ago but no one has answers. I am only trying to help. If you need anymore info or can direct me to a place where this problem can be rectified please help as I am trying to make this ROM run 100%.
See.
Sent from my SAMSUNG-SGH-I727 using XDA Premium 4 mobile app
Time for a reset in here, thread cleaned and closed too. Pending proper way of doing things in accordance with XDA posting rules.
OP, you probably ought to be getting proper permissions, and certainly giving credits for others work.
Those are the rules here at XDA.
To all the others, do NOT take the "law" into your own hands, moderators are here for that. Whether you feel right our wrong about your stance, there are respectful ways to do things. Think that what you said/posted was OK? Well, that is what moderators are here for. We remove stuff that is offensive and non-sensible - That being said, all the "stuff" has been cleaned. Use of PM to (respectfully) sort out issues is WAY better then doing it in here, or any thread for that matter.
Have a problem with not being able to defend your honor in XDA? Then I suggest one of them social media sites, they love that stuff.