OK I have been downloading and reflashing few ROMs and now I have forgotten which one I flashed in.
Here's what it reads on About the Phone.
Kernel Version: 3.0.38-Cyanogenmod-g2a514aa [email protected]#1
CM version: 10-20120802-SKANK-Crespo
I think it is either Jellybro or JellyBelly CMREX. I thought it's the latter, but not so sure anymore. Can anyone tell?
Check your build.prop, maybe something writes there.
Sent from SpeedMachine i9023
Build #: cm_crespo-userdebug 4.1.1 JRO03H eng.joey.20120802.150826 test-keys
Pretty cryptic. The Changelog lists some old CM 9 stuff!
OK I think I figured it out by downloading the two ROMs and matching the file size with the one in my sdcard. The CMREX Rom is way too big. Looks like I am running Jellybro.
Man I'm such a dork. Been hanging out at the wrong ROM thread asking questions on a different ROM.
In cm version it says SKANK which is is the euroskank version, jellybro
Sent from my Nexus S 4G using xda premium
AlphaEchoViktorSierra said:
In cm version it says SKANK which is is the euroskank version, jellybro
Sent from my Nexus S 4G using xda premium
Click to expand...
Click to collapse
Cmrex uses jellybro
This post was sent from a Nexus S running Cyanogen(mod)10
Related
Does anyone a link for it? And if you do, it's compatible with any rom, not just CM9 right?
moneybag said:
Does anyone a link for it? And if you do, it's compatible with any rom, not just CM9 right?
Click to expand...
Click to collapse
youre joking, right?
LMAO Man I needed a good laugh
Not jellybean but the new cm9 kernel... sorry if I'm sounding like an idiot
Sent from my Nexus S using XDA
Bahahahahaha. Hilarious! Seriously though, I think he didn't mean Android 5.0, maybe 5.0 is the kernel build number? I don't know for sure but maybe that's what he meant. Either way this made me laugh my ass off.
OP, a simple search would wield results much quicker than posting a new thread. Good luck.
Sent from my Nexus S 4G using xda premium
The cm9 thread says v 4.0.4 v5.0 so that's why I had it. The one on I could find was the one on BMs 4.0.4 stock ICS thread but its not the newest kernel.
Sent from my Nexus S using XDA
moneybag said:
The cm9 thread says v 4.0.4 v5.0 so that's why I had it. The one on I could find was the one on BMs 4.0.4 stock ICS thread but its not the newest kernel.
Sent from my Nexus S using XDA
Click to expand...
Click to collapse
download the rom then pull out the boot.img. you can flash it via fastboot or the terminal emulator. i dont know how compatible itll be with other non-cm based roms. if it doesnt boot, just reflash your rom.
i knew cm 7 nightly and rc3 work with baseband 2012 march, but miui how to put in cm information make miui work with baseband 2012 march
I think you can if you follow whitehawkx's guide to porting miui using the cm7 nightly... just a theory.
Pretty sure that's possible. The guide is on rootzwiki
Sent from my LG-P999 using Tapatalk
It is not just simple as it looks... all you copying from cm nightly is ketnel and wifi drivers with few other modules.. audio crap isin framwork
Sent via G2X-SINGH-UI
I have already tried and it doesn't work. But looks like miui.us supports our phone now and dropped the o2x. If they update to the lasted cm it may be supported
Sent from my LG-P999 using XDA
Pass me a link to the MIUI you want to use and I could give it a try. Is it GB based or ICS?
Thanks to Rafase282 I can get miui to work just need a popular rom to mod. I have a stock miui.us rom uploaded to my Google drive account pm for link I'll post a rom when I read the rules and make sure I can and what I need to do so I don't get in trouble.
Sent from my LG-P999 using XDA
Try my beta build
Sent via G2X-SINGH-UI
Rafase282 said:
Pass me a link to the MIUI you want to use and I could give it a try. Is it GB based or ICS?
Click to expand...
Click to collapse
http://roms.miui.us/romsnippet.php?device=p999
Alot of different miui ports are now working with new BB. This is my port I got to work with lots of help.
http://forum.xda-developers.com/showthread.php?t=1696956
Sent from my LG-P999 using XDA
Since there is a port already then I dont need to do it myself =]
I'm trying miui v4 on my Nexus one. A bit slow, i dont know if its the phone or lack of HW but im liking it. I might try to port it once I get a stable release of LewaOS.
Anyone with experience with ics ROM on old bb?
Just wasn't to flash one with the features working especially calling.
Thanks to anyone who reads and helps.had this phone since April 17 2011
Sent from my LG-P999 using xda app-developers app
g2xpolak said:
Anyone with experience with ics ROM on old bb?
Just wasn't to flash one with the features working especially calling.
Thanks to anyone who reads and helps.had this phone since April 17 2011
Sent from my LG-P999 using xda app-developers app
Click to expand...
Click to collapse
flash hellfires sandwich ics, its been the best ics release from the beggining, and the most updated one, after download THIS and flash it and you will have calls working.
Thanks big time. Luckily i already have the file as i needed it to get the latest cyanogen nightlies to allow calls. Appreciate it. Will flash tonight. Cheers
Sent from my LG-P999 using xda app-developers app
g2xpolak said:
Thanks big time. Luckily i already have the file as i needed it to get the latest cyanogen nightlies to allow calls. Appreciate it. Will flash tonight. Cheers
Sent from my LG-P999 using xda app-developers app
Click to expand...
Click to collapse
If you want a more stock experience, I strongly recommend EaglesBlood ICS 4.04 AOSP, build 5.5 with 5.6 kernel. These guys also fixed the data drop problem. It's the smoothest ICS ROM I've seen. Also, it uses the Aroma Installer, and supports both the OLD and NEW baseband.. it defaults to the OLD baseband when installing, so you shouldn't have any problems.
For this sweet setup, just do the following and you should be good to go:
1.) Install Build 5.5 zip through CWM Recovery - developer.clockworkmod.com/downloads/718/3127/egb-nightly-2012-07-01-signed.zip
2.) Install latest GApps zip RIGHT after that in CWM Recovery - goo.im/gapps/gapps-ics-20120429-signed.zip
3.) Install Kernel 5.6 zip right after that in CWM Recovery - dropbox.com/s/p8z8sdy7iwemegk/eb_p999_beta5.6.zip
4.) [Added Bonus] Install Default Browser Rotation/Flickering Fix right after THAT in CWM Recovery - charlie.d-h.st/k7J/00010/Browser-rotationfixed-tonyp.zip?key=1343730743 (by tonyp)
The above links work. Unfortunately, I can't supply the nice clickable outside links until I have more postings under my belt.
genesis is pretty awesome, too. Tons of options, aroma installer, both basebands supported, CM9 and AOKP fusion.
My advice is try them all out. Pretty much anything on here is better than stock. See what fits you and your phone the best
Sent from my LG-P999 using xda premium
Running a recent PACman ROM nightly (22.0.1) but the battery life is pretty bad. Absolutely love everything else so I was hoping a different kernel might help out a bit in the battery department. Tried flashing the latest Lean Kernel but when I tried to boot I got a pink "SAMSUNG GALAXY SIII" screen and it just hung there. I've got a backup so no worries on that front. Any ideas on what I may be doing wrong?
What is the file name of the Leankernel zip that you flashed? Sounds like you flashed the TW version.
Sent from my SCH-I535 using xda app-developers app
SlimSnoopOS said:
What is the file name of the Leankernel zip that you flashed? Sounds like you flashed the TW version.
Sent from my SCH-I535 using xda app-developers app
Click to expand...
Click to collapse
I think that's it:
lk_s3vzw_tw_jb-v2.2.zip
Tried flashing Zeus kernel too but I had the same issue minus the pink. I feel like I'm missing something really obvious. I'm new to all this stuff. What does the tw designation mean, exactly?
Figured out the TW thing. I'm guessing if they aren't in the dev forms then there are no AOSP versions available then? Hope they pop up soon.
TW = Touchwiz, which is the software that Samsung had on the phone before you flashed this custom rom. You're looking for the AOSP version of Leankernel, well any kernel you intend to flash, for PacMan. Go to the Verizon GSIII section of Rootzwiki and click on the AOSP Leankernel thread. Download any of the 5.0 versions of AOSP Leankernel.
Oh, and Imoseyon is not making an xda thread. So that isn't happening lol
Sent from my SCH-I535 using xda app-developers app
Awesome just got the latest LeanKernel build. already flashed Ktoonsez so i'll see how that works out for a few days then switch over and give Lean a try. Thanks for the info.
I was using a March 3 stable release of CM10.1 for the Verizon Galaxy S3 and the cyanogenmod kernel, everything was working fine. I was using leankernel on a different build of CM, so I got an updated version of leankernel and made sure it was compatible with my version of CM. I flashed the kernel in CWM, made sure to clear the cache/dalvik and now boots, shows the Galaxy S3 logo for a split second, then the screen turns black and cannot do anything. Any help? I am pretty sure I was rooted considering I could give root access to applications, and it would appear under the superuser in the Settings.
What date is your current rom from? LK 5.5.5 should only boot on AOSP roms dated April 19th or newer.
Sent from my SCH-I535 using xda app-developers app
SlimSnoopOS said:
What date is your current rom from? LK 5.5.5 should only boot on AOSP roms dated April 19th or newer.
Sent from my SCH-I535 using xda app-developers app
Click to expand...
Click to collapse
Current ROM is from March 3rd, I believe. I know it's from March. Is there a leankernel version that would work with a March 3rd release of CM?
Syflox said:
Current ROM is from March 3rd, I believe. I know it's from March. Is there a leankernel version that would work with a March 3rd release of CM?
Click to expand...
Click to collapse
I'm fairly certain AOSP roms from March 3rd are Linux 3.0 based. Which means you can only use AOSP LK 2.8 and LK 2.9. I don't run AOSP roms but I keep up with the AOSP kernel threads a good bit just for knowledge purposes.
I said this once but it needs repeating in a different manner. Imo isn't continuing work on Linux 3.0 kernels so you'll remain on that setup until you update your rom to one of the latest builds.
Sent from my SCH-I535 using xda app-developers app
I just flashed LK 2.8, booted up fine, thanks! Here's the leankernel builds for anyone who has the same problem as me http://imoseyon.host4droid.com/s3/aosp/#!/view=details/lang=en/sort=da