Related
Can anyone point me in the direction of a step-by-step process for flashing a new kernel into a ROM?
I want to try the new Matrix 4.0.3 kernel.
Download kernel put on SD card. Go into recovery. (Power plus volume up choose recovery hit power) wipe cache partition go to advance menu wipe dalvik. Go back install zip from SD card. Choose zip. Look for your kernel hit install reboot system. Enjoy.
Sent from my Nexus S 4G using xda premium
Hello.
The step to flash your kernel is simple. Donwload the last version compatible ICS and put to SDCARD. Restart your phone to recovery mod : Install zip from sdcard.
Warning choose a compatible kernel.. I have try Glados V2.0.
Sent from my Nexus S using XDA App
chronikfatigue said:
Can anyone point me in the direction of a step-by-step process for flashing a new kernel into a ROM?
I want to try the new Matrix 4.0.3 kernel.
Click to expand...
Click to collapse
Dont flash anything yet.. Mathkid is re-releasing do to errors
I personally always use rom manager... Flash cwm.... Pick the nexus u curently have... Once it loads.. Flash rom from sd.... Locate the file ... Wipe dalvik and cache... Ok!
It might just send u to fastboot mode... Just reboot and follow the same steps... Should get it the second time
-Google Galaxy Tab
That easy, huh? I've had ICS on since yesterday, should I flash it again THEN do the kernel, or can I just flash the kernel now and see how it goes?
And with glados, what's the difference between the BFS and CFS versions?
Hey, not sure of what I need to do. I have read things for clean installs, then things to unbrick your phone. I haven't seen anything for installing a newer rom.
I have the GingerBread unbloated root ROM. Nothing crazy. I want to install the newest Eclipse ROM. I downloaded the eclipse file. However, not 100% sure how to install this. When I installed my previous rom i did it with Odin. Can anybody point me in the right direction?
Isn't there an Odin for eclipse? If not you need to Odin cwm and then flash eclipse through that. Portip: you need to go into cwm on the first reboot or you will have to start over
Charged up post!
Go here to install CWM http://forum.xda-developers.com/showthread.php?t=1106608 Once you have CWM save whatever you need to save in Titanium Backup or Google or however u save ur stuff; make sure the ROM u want is on ur SD card (kernel too, i suggest PJB if u dont have it already) and power off ur phone. then boot into CWM (Vol up, home, and power together until u see the samsung logo, then let go of power button but hold the other two until you see the text this is CWM)
You dont HAVE to do a wipe data/factory reset, but it is highly suggested. wipe cache. go to advanced and wipe dalvik. Then just choose flash file from sd card, choose ur ROM and ur done.
cnoevl21 said:
Go here to install CWM http://forum.xda-developers.com/showthread.php?t=1106608 Once you have CWM save whatever you need to save in Titanium Backup or Google or however u save ur stuff; make sure the ROM u want is on ur SD card (kernel too, i suggest PJB if u dont have it already) and power off ur phone. then boot into CWM (Vol up, home, and power together until u see the samsung logo, then let go of power button but hold the other two until you see the text this is CWM)
You dont HAVE to do a wipe data/factory reset, but it is highly suggested. wipe cache. go to advanced and wipe dalvik. Then just choose flash file from sd card, choose ur ROM and ur done.
Click to expand...
Click to collapse
If you're coming from another Rom, it is highly recommended to do full wipe. Factory data, cache, dalvik. Mount system first, then flash Rom.
Sent from my SCH-I510 using xda premium
cnoevl21 said:
Go here to install CWM http://forum.xda-developers.com/showthread.php?t=1106608 Once you have CWM save whatever you need to save in Titanium Backup or Google or however u save ur stuff; make sure the ROM u want is on ur SD card (kernel too, i suggest PJB if u dont have it already) and power off ur phone. then boot into CWM (Vol up, home, and power together until u see the samsung logo, then let go of power button but hold the other two until you see the text this is CWM)
You dont HAVE to do a wipe data/factory reset, but it is highly suggested. wipe cache. go to advanced and wipe dalvik. Then just choose flash file from sd card, choose ur ROM and ur done.
Click to expand...
Click to collapse
Where is this PJB kernel?
Can I follow this procedure coming from deodexed EP4D debloated running Imnuts kernel (4.0. something) and EXT4?
Edit: its Imoseyon's kernel.
Sent from my SCH-I510 using Tapatalk
talty09 said:
Where is this PJB kernel?
Click to expand...
Click to collapse
http://rootzwiki.com/topic/137-01-30-12peanutbutta-jelly-time/
Yes, that's exactly what I did. I installed the newest CWM first (You can find the thread in the development section) and then I installed eclipse v1.4 over the debloated/deodexed EP4D. Wipe data, cache, and Dalvik cache of course before installing the new ROM. Reboot and then go back into recovery and install PBJ 0130 kernel and you'll be good to go. Also, if you run into superuser problems, like losing root access, just reinstall the newest superuser in CWM.
Sent from my SCH-I510 using XDA App
wpgibson said:
Can I follow this procedure coming from deodexed EP4D debloated running Imnuts kernel (4.0. something) and EXT4?
Edit: its Imoseyon's kernel.
Sent from my SCH-I510 using Tapatalk
Click to expand...
Click to collapse
yes but not recommended...use pb&j...
Use imoseyon's kernel to convert to EXT4, then go back and flash pbj
Sent from my SCH-I510 using xda premium
So get the newest version of CWM, get PBJT, use odin to put on CWM, flash the PBJT kernel, Wipe data, davik, cahce, then flash the eclipse rom?
talty09 said:
So get the newest version of CWM, get PBJT, use odin to put on CWM, flash the PBJT kernel, Wipe data, davik, cahce, then flash the eclipse rom?
Click to expand...
Click to collapse
Yes but I flashed the new ROM first after wiping everything and then installed the new kernel (0130 PBJ) after first full boot on the new ROM.
Sent from my SCH-I510 using XDA App
does it matter? either way then i will follow what you said. Flash CWM, wipe data, Flash ROM, then PBJT?
Superuser through CWM
ewh1292 said:
Yes, that's exactly what I did. I installed the newest CWM first (You can find the thread in the development section) and then I installed eclipse v1.4 over the debloated/deodexed EP4D. Wipe data, cache, and Dalvik cache of course before installing the new ROM. Reboot and then go back into recovery and install PBJ 0130 kernel and you'll be good to go. Also, if you run into superuser problems, like losing root access, just reinstall the newest superuser in CWM.
Sent from my SCH-I510 using XDA App
Click to expand...
Click to collapse
That procedure worked like champ. .... except:
as you suggested, Superuser lost root access.
I'm sure this is a noob question, but where/how do I plug SuperUser in through CWM. I assume there is a zip that I can load once i'm up in CWM recovery. If so, would you be kind enough to point in the right direction to get it? (I know, search is my friend, but I'm on a tight clock today.)
[EDIT] - I ran "Fix permissions" in CWM. Rebooted, and it had SU working properly.
I also Found a SuperUser Pack that is a .Zip file over at Tom's world that's flashable through CWM. I didn't use it, but I did download it.
Many thanks. You got me on Eclipse in a record amount of time.
talty09 said:
does it matter? either way then i will follow what you said. Flash CWM, wipe data, Flash ROM, then PBJT?
Click to expand...
Click to collapse
I don't know if it matters, but it worked for me, so it's ultimately up to you what you do with your phone lol. So the answer to your question is yes.
Sent from my SCH-I510 using XDA App
wpgibson said:
That procedure worked like champ. .... except:
as you suggested, Superuser lost root access.
I'm sure this is a noob question, but where/how do I plug SuperUser in through CWM. I assume there is a zip that I can load once i'm up in CWM recovery. If so, would you be kind enough to point in the right direction to get it? (I know, search is my friend, but I'm on a tight clock today.)
[EDIT] - I ran "Fix permissions" in CWM. Rebooted, and it had SU working properly.
I also Found a SuperUser Pack that is a .Zip file over at Tom's world that's flashable through CWM. I didn't use it, but I did download it.
Many thanks. You got me on Eclipse in a record amount of time.
Click to expand...
Click to collapse
Cool, glad I could help out although you did everything so great job!
Sent from my SCH-I510 using XDA App
Yesterday i rooted my phone, using the all in one tool. My phone is still S-on i do have superSU installed. When i use the bootmenu from my Sensation i also can go to CWM recovery program. No heres my question will custom ROMS work using the install zip from SD card or will it not work because it is still S-ON.
baleno_467 said:
Yesterday i rooted my phone, using the all in one tool. My phone is still S-on i do have superSU installed. When i use the bootmenu from my Sensation i also can go to CWM recovery program. No heres my question will custom ROMS work using the install zip from SD card or will it not work because it is still S-ON.
Click to expand...
Click to collapse
Which firmware are you on? Did you update to Sense 3.6 + ICS with official update?
Did you unlock your bootloader through HTCDev ?
If you're on the latest firmware, flash the latest ext4 recovery. Before flashing a ICS / JB rom, on 4EXT, go to Tools - Enable Smartflash. You need this to flash custom roms with S-ON.
My sensation is S-ON and so far it's been a flawless feature. No need to flash kernels and boot.imgs through apt anymore
Thankz, i did the HTC dev unlock method and i have the latest official updates from HTC. i have flashed only the CWM image using the all in one tool for sensation.So if i understand you correctly i only have to flash the EXT4 image to the sensation which is part of the all in one tool for sensation.And i can install custom roms without using S-off?.
baleno_467 said:
Thankz, i did the HTC dev unlock method and i have the latest official updates from HTC. i have flashed only the CWM image using the all in one tool for sensation.So if i understand you correctly i only have to flash the EXT4 image to the sensation which is part of the all in one tool for sensation.And i can install custom roms without using S-off?.
Click to expand...
Click to collapse
yeap that's all you need
edit:but don't forget to enable smartflash from it before flashing any roms
do i use smartflash also in the all in one tool or do i use from instal zip from sd =cart and where can i get smartflash?
baleno_467 said:
do i use smartflash also in the all in one tool or do i use from instal zip from sd =cart
Click to expand...
Click to collapse
once you flash the 4ext recovery the all in one tool is no longer necessary
then from recovery go
tools
and at the bottom of the menu you will see the smartflash feature
enable it
after that go back
choose zip from sdcard
install zip from sdcard
thank you very much
Okay mow a little question how can i adjust my cpu frequenti (overclock) because the atuntu cpu master wont go further then 1188mhz.I found a zip file named Overclocked_kernel_v1.5.2_by_SebastianFM but when i want to install this file using the clockwork mod recovery it says that the installation failed.
Because i am trying to copy the url from xda app and i can' t do it ok then
Use the search and write(if your error is status 7)
Assert failed status 7 sensation
Download and flash the insecure.img
After that flash the kernel
Edit:it is better to install it with 4ext recovery
Sent from my HTC Sensation Z710e using xda premium
Just to summarize what rzr86 told you with links, to help you.
Flashing roms with S-ON: Click here
Fix Status 7 Error on assert raw write: Click here
matekaneve said:
Just to summarize what rzr86 told you with links, to help you.
Flashing roms with S-ON: Click here
Fix Status 7 Error on assert raw write: Click here
Click to expand...
Click to collapse
exactly
i couldn't paste the url link from xda app before
i could copy it to clipboard but after that ididn't know how to paste it
nevermind
ok i installed ext4 after that unsecure.img and overclock kernel went well now
baleno_467 said:
Okay if i flash the EXt4 recovery do i have to remove the CWM recovery or will this automaticly be removed. Using the CWM recovery with the unsecure zip file to fix status 7 errors, didnt work out when installed the overclocked kernel.
Everything went wll when installing the unsecure zipfile, it said it was okay. But when i installed the overclocked kernel it still keeps giving status 7 error.
Thats why i want to install the EXT4 recovery.
Click to expand...
Click to collapse
once you have flashed 4ext yeap it will remove automatically cwm recovery
Well everything worked out fine thank you all for your help, my cpu speed is now on 1,5ghz the same as an sensation XE.
Okay now another short question if in time i do want to change my original ROM to an custom ROM al i have to do is put the custom ROM on the SD Card and install the rom using the EXT4 recovery. Or do i have to change the system partition just like with the HD2
And if i want to go back from Custom to original all i have to do is place the original ROM on a SD card and instal it from EXT4 ??
baleno_467 said:
Well everything worked out fine thank you all for your help, my cpu speed is now on 1,5ghz the same as an sensation XE.
Okay now another short question if in time i do want to change my original ROM to an custom ROM al i have to do is put the custom ROM on the SD Card and install the rom using the EXT4 recovery. Or do i have to change the system partition just like with the HD2
And if i want to go back from Custom to original all i have to do is place the original ROM on a SD card and instal it from EXT4 ??
Click to expand...
Click to collapse
yes put the rom on sdcard and then flash from 4ext
but before flashing any rom always enable smartflash
and i suggest to have a nandroid backup just in case
Thank you U i still have the original ROM from htc so that won't be any problem. Thank you very much for your quick response
Sent from my HTC Sensation Z710e using xda app-developers app
I have an htc explorer the problem is only stock rom works on it all other custom roms go int boot loop
tried cm9, mini cm9, flyrom, sense 4.1 nun of them work
flashed all roms with twrp,cwm,philz
any solution ????
thx in advance
Jimit.Patel said:
I have an htc explorer the problem is only stock rom works on it all other custom roms go int boot loop
tried cm9, mini cm9, flyrom, sense 4.1 nun of them work
flashed all roms with twrp,cwm,philz
any solution ????
thx in advance
Click to expand...
Click to collapse
HY, the bootloop means that you are stucked at the boot sequence.This might be because you flashed the boot.img wrong/or you never wiped dalvik,cache ,etc.I suggest that you should wipe cache,dalvik,and factory reset 3 times before flasing the rom(it might not work entirely well the first 2 times) also, try to flash the boot.img correctly,and wait a few minutes (let it boot),you will now you are in bootloop after 15 minutes or so.
I did try that no help and after flashing stock rom now phone works just my internal memory is full only 17mb free so cant use almost any app cant wipe it what so ever even tried factory reset but no help
Sent from my HTC Explorer using xda premium
Jimit.Patel said:
I did try that no help and after flashing stock rom now phone works just my internal memory is full only 17mb free so cant use almost any app cant wipe it what so ever even tried factory reset but no help
Sent from my HTC Explorer using xda premium
Click to expand...
Click to collapse
have you tried logcat to see what's causing the bootloop ?
I have an htc chacha, with the same memory problem as yours, but I managed to mount the /data folder on the sdcard's 2nd partition, and now I have 4 gb internal memory. I can have more if I change the partitions size, but I don't need more.
SirRaul said:
have you tried logcat to see what's causing the bootloop ?
I have an htc chacha, with the same memory problem as yours, but I managed to mount the /data folder on the sdcard's 2nd partition, and now I have 4 gb internal memory. I can have more if I change the partitions size, but I don't need more.
Click to expand...
Click to collapse
And exactly how do you do that ????
Jimit.Patel said:
And exactly how do you do that ????
Click to expand...
Click to collapse
First of all you need to unlock your phone via htcdev. Did you do that already?
Jimit.Patel said:
I have an htc explorer the problem is only stock rom works on it all other custom roms go int boot loop
tried cm9, mini cm9, flyrom, sense 4.1 nun of them work
flashed all roms with twrp,cwm,philz
any solution ????
thx in advance
Click to expand...
Click to collapse
SirRaul said:
First of all you need to unlock your phone via htcdev. Did you do that already?
Click to expand...
Click to collapse
yup done that about a year ago !!!!
Are you familiar with linux ? I did all the process in linux because it's much more friendly in these cases. You will need kitchen tool, kernel kitchen, boot.img editing, and of course, cwm recovery it's a must. My phone succesfully booted when I used a class 10 sandisk sdcard.
Jimit.Patel said:
I have an htc explorer the problem is only stock rom works on it all other custom roms go int boot loop
tried cm9, mini cm9, flyrom, sense 4.1 nun of them work
flashed all roms with twrp,cwm,philz
any solution ????
thx in advance
Click to expand...
Click to collapse
I guess your method of flashing was incorrect, can you explain in detail ?
TechGeek7757 said:
I guess your method of flashing was incorrect, can you explain in detail ?
Click to expand...
Click to collapse
1. Copy FlyROM zip file to sd-card.
2. Reboot into Recovery.
3. Wipe Data/Factory reset.
4. Install zip from sd card and select the zip file and then select yes to Flash.
5. Reboot after installation completes.
6. Now Apply Patch 3 for Flyrom
what could be wrong in this ????
1. Copy FlyROM zip file to sd-card.
2. Reboot into Recovery.
3. Wipe Data/Factory reset.
4. Wipe Cache Partition.
5. Wipe Dalvick cache.
6. Install zip from sd card and select the zip file and then select yes to Flash.
7. Wipe Cache Partition.
8. Wipe Dalvick cache.
9. Reboot.
could it possibly be because you forgot to clear cache or do a factory reset?
Hi there,
I am currently installing Cyanogenmod 10.1 for my HTC Sensation. I'm stuck in the blue circle loading screen. (image below)
I don't know what should I do.
Help will be highly appriciated.
Sent from my HTC One using xda app-developers app
idomohr25 said:
Hi there,
I am currently installing Cyanogenmod 10.1 for my HTC Sensation. I'm stuck in the blue circle loading screen. (image below)
I don't know what should I do.
Help will be highly appriciated.
Sent from my HTC One using xda app-developers app
Click to expand...
Click to collapse
probably you are on S-ON am i right?
if yes use 4ext recovery
enable smatflash from it
flash the rom
done
otherwise flash the boot.img of the rom via fastboot command
My device is S-OFF.
I am trying to flash firmware again, and clear cache and dalvik.
idomohr25 said:
My device is S-OFF.
I am trying to flash firmware again, and clear cache and dalvik.
Click to expand...
Click to collapse
Most of the time there is no need to re-flash firmware. Did you wipe data beforehand? maybe you can try another build (the from an earlier/later date). This might help.
Sometimes a complete wipe is needed...
Hi,
Sometimes when moving from one ROM to another a complete wipe and format of all partitions (except sdcard) is needed in order for it to work. Have you wiped and formatted all your partitions before flashing the ROM? I use Titanium pro to backup my apps before doing this.
You should be able to do this with any of the recovery programs. 4EXT is really good and easy to use for this. Also, if you don't already know this, you should flash the correct GAPPS for your ROM after you install the update. That way you will have everything you need on your first boot after your flash.
Good luck!
when i updated my firmware from 3.32 to 3.33 i got stuck at the same screen. Just booted to recovery and used 4EXT Recovery touch to wipe cache and dalvik, after that everything was fine