hi my usb isnt working i found a post that suggested typing in to the dail pad the following *#7284# this just took me to service mode with no options. i can't seem to get to recovery mode either is there a prefix that i can dial for that my phone is a I5500
Hi all im new to the android game, iam trying to repair my s3 imei with QPST NV item Manger. But im stuck at the Qualcomm USB Settings part where you enter *#7284# the only settings that come up are UART And USB where you can change it to pda or modem. When i change the USB to modem from pda it comes up on the computer as cdc communications interface and asks for a driver.
Any help will be great ive been stuck on this for 2days trying to figure it out
My galaxy s3 is locked to vodafone running a jelly bean custom rom. It was Ice cream sandwich before but when i put in *#7284# it would just come up as "connection problem or invalid MMI code".
Thanks in Advance :laugh:
johny1686 said:
Hi all im new to the android game, iam trying to repair my s3 imei with QPST NV item Manger. But im stuck at the Qualcomm USB Settings part where you enter *#7284# the only settings that come up are UART And USB where you can change it to pda or modem. When i change the USB to modem from pda it comes up on the computer as cdc communications interface and asks for a driver.
Any help will be great ive been stuck on this for 2days trying to figure it out
My galaxy s3 is locked to vodafone running a jelly bean custom rom. It was Ice cream sandwich before but when i put in *#7284# it would just come up as "connection problem or invalid MMI code".
Thanks in Advance :laugh:
Click to expand...
Click to collapse
I have the same problem, is there a solution?. The model is GT-I9300
lpf_kb said:
I have the same problem, is there a solution?. The model is GT-I9300
Click to expand...
Click to collapse
same problem
gt-I9300
rom:criskelo teamrom jelly bean v14.0
*#9090# is this menu that you need?
openview said:
*#9090# is this menu that you need?
Click to expand...
Click to collapse
this is not the menu i think
did someone find how to get the qualicomm settings menu?
grules said:
this is not the menu i think
did someone find how to get the qualicomm settings menu?
Click to expand...
Click to collapse
cant be done, im desperate to use similar technique on i9300, but that stuff is only for qualcomm chipsets from american versions of the phone.
http://forum.xda-developers.com/showthread.php?t=1853887
just passing by and stumbled across this....
been trying to repair my scrambled imei after switching to a custom rom...
unfortunately, my efs backup is gone....
well...back to the crux at hand ....you can get to International GS3 Qualcomm usb settings by typing *#0808#
there you'll can switch between CP and AP settings
also sub toggle on AP settings{ ......mtp, mtp+adb,ptp,ptp+adb,dndis+dm+modem, rmnet+dm+modem,dm+modem+adb}
goodluck mates.
Hey can someone please help me , im from south africa , i cant put my Galaxy S3 in diag mode , i need to put it in diag mode to fix my imei that is missing . i already tried the *#7284# code , put there is no qualcomm usb settings menu
-=sTs=- said:
Hey can someone please help me , im from south africa , i cant put my
Click to expand...
Click to collapse
Go to Menu, Settings, Applications, Development and check "USB Debugging"
Go to Phone Dialer and type *#22745927
Enable Hidden Menu
Go back to Phone Dialer and dial **772
Hit Home button then go back to Dialer
Dial *#7284#
It's been a while since I entered the Diag mode in my G900P. I recently upgraded to lollipop. I tried to enter the diag mode but it can't be recognized in devices manager and even DFS. When i change the device into MTP+ADB , I can here the sound of pluging a device but when I change it th DM+Modem+ADB, I hear nothing just the disconnecting device sound .Does the lollipop system has anything to do with the problem??
Anyone may know why and how can I fix it?
please help
Thanks
No one has a solution?
no diag port
tired all possible codes nothing working, diag port really locked. any1 has any other thought.
bump
bump
ryu_gian said:
tired all possible codes nothing working, diag port really locked. any1 has any other thought.
Click to expand...
Click to collapse
never mind, solved.
ryu_gian said:
never mind, solved.
Click to expand...
Click to collapse
Do you mind sharing your solution? I've had the same problem since upgrading to lollipop.
Thanks
S5 Lollipop
Go to recovery Mode
Select enable CP Logging (2nd to last option)
Device reboots.
Dialer ##366633# / ##3424# <> Enable DM Mode <> DM Mode gets enabled.
hit the thank button on your way out.
ryu_gian said:
Go to recovery Mode
Select enable CP Logging (2nd to last option)
Device reboots.
Dialer ##366633# / ##3424# <> Enable DM Mode <> DM Mode gets enabled.
hit the thank button on your way out.
Click to expand...
Click to collapse
##366633# not working on sprint note4. But ##3424# is working after CP Logging. Thanks for the info
gurugopal said:
##366633# not working on sprint note4. But ##3424# is working after CP Logging. Thanks for the info
Click to expand...
Click to collapse
usually Verizon is ##366633#
and sprint is ##3424#
How to enter into recovery mode. I am on stock lollipop.
I have Tmobile S5 - G900T
ryu_gian said:
usually Verizon is ##366633#
and sprint is ##3424#
Click to expand...
Click to collapse
alkeshmehta said:
How to enter into recovery mode. I am on stock lollipop.
I have Tmobile S5 - G900T
Click to expand...
Click to collapse
recovery mode> Vol Up + Home + power
Solved.
enabled cp logging from recovery mode and it works
alkeshmehta said:
How to enter into recovery mode. I am on stock lollipop.
I have Tmobile S5 - G900T
Click to expand...
Click to collapse
ryu_gian said:
Go to recovery Mode
Select enable CP Logging (2nd to last option)
Device reboots.
Dialer ##366633# / ##3424# <> Enable DM Mode <> DM Mode gets enabled.
Hello,
Could you please tell me what cp logging enable/disable do?
Click to expand...
Click to collapse
you rock bro. Thanks a lot
ryu_gian said:
never mind, solved.
Click to expand...
Click to collapse
hI rYU_gIAN,
i am running g900f with rooted lollipop, when i went to recovery prior to cwm which is stock recovery i could not see enable cp logging option. Could you please advise how am i supposed to have that option enabled. I have stocked non root and root via odin and it is still not there.
meisterpido said:
hI rYU_gIAN,
i am running g900f with rooted lollipop, when i went to recovery prior to cwm which is stock recovery i could not see enable cp logging option. Could you please advise how am i supposed to have that option enabled. I have stocked non root and root via odin and it is still not there.
Click to expand...
Click to collapse
device seems to be GSM,
try *#0808# and select 'DM+MODEM+ADB or *#7284#
alkeshmehta said:
How to enter into recovery mode. I am on stock lollipop.
I have Tmobile S5 - G900T
Click to expand...
Click to collapse
Vol+ & Home & PWR
Root device by pingo root ,then install idone galaxy tool,then enable hidden menu by idone
On dialer *#0808#/##0909#
still no diag mode after following steps. Went to service mode as well to try to active it from there and it says diag mode not supported. Am running moar rom with a kt kernel. Any thoughts guys...
i have sm-g900r7 (galaxy s5 spire) android 5.0 stock
in stock recovery i have option for enable cp logging.
if i enable then boot to home screen and open dialer and enter *#0808# i can select dm+modem+adb and it works perfect.
i i flash twrp 2.8.6.0 kltespr i have to recovery option to enable cp logging.
i can dial *#0808# and get into menus but i can not enable dm mode when i select dm+modem+adb.
if i hit the reboot button i see set switch_sel x03 and then under that i see set switch sel and it boots to home screen
i dial *#0808# and select dm+modem+adb and no driver pops up or sound and anyhow it dont work
my question is.
can i boot to recovery and enter a cmd to enable cp logging or can i do that command from terminal emulator with root or from adb from windows computer.
got to have dm mode working.
thanks
My phone "galaxy core" is looked with password and its screen is broken and i want to restore my contact and my data also USB debugging mode is off
Can anyone help me
Joeeltoukhy said:
My phone "galaxy core" is looked with password and its screen is broken and i want to restore my contact and my data also USB debugging mode is off
Can anyone help me
Click to expand...
Click to collapse
Hi and thank you for using XDA Assist
Well if even USB debugging is disabled you don't have any kind of options about how to do that.
Sorry.
Regards