Hi to all.
In the new roms from WM 6. Have and application called "Internet sharing"
I want to use the USB cable (not bluetooth) to connect mi laptop to internet trought my universal 3G.
How i use it?
I activate the connection. Mark the USB and my 3G definition. Connect. It's connecto 3G. And in the laptop i cant navigate.
Can anybody help me?
Thanks.
You have to disable the USB connection in activesync on your PDA, as well on your laptop. Mine worked with WM05!
First, connect the PDA to the net by selecting usb connection and your default 3g connection, push connect and then connect the PDA to the laptop and it will be seen as some modem or something else.
You have to disable the USB connection in activesync on your PDA, as well on your laptop. Mine worked with WM05!
Thanks.
But dont wotk for me.
The laptop detect the connection sharing. But the laptop don't navigate on internet.
The Pda navigate Ok.
am having the same problems too. ive followed above posted instructions but no dice.
in my case, the connect button is grayed out.
think i may have to configure either VPN, or ADD MODEM CONNECTION or SETUP PROXY SERVER. either way i dont have any idea how.
ROM: black shadow 4
RADIO: 1.43
juanjillo said:
Thanks.
But dont wotk for me.
The laptop detect the connection sharing. But the laptop don't navigate on internet.
The Pda navigate Ok.
Click to expand...
Click to collapse
Have your browser on your PC set to Auto detect Proxy settings.
My IE 7.0 have the "automatically detect Settings"
Dont work.
Thanks
juanjillo said:
Hi to all.
In the new roms from WM 6. Have and application called "Internet sharing"
I want to use the USB cable (not bluetooth) to connect mi laptop to internet trought my universal 3G.
How i use it?
I activate the connection. Mark the USB and my 3G definition. Connect. It's connecto 3G. And in the laptop i cant navigate.
Can anybody help me?
Thanks.
Click to expand...
Click to collapse
Hi,
I can describe, how I am using this feature in Vista.
First I do prefer to use Bluetooth over USB. The reason: it is very often that I am in the room, were the GSM/3G signal is poor. Then I can place my Uni in the window or other place were the signal is much stronger, and connect with the Uni using Bluetooth. The transfer is more or less on the same level as on USB anyway.
Now, Internet sharing option is a new function in WM6, bit like internet sharing in desktop windows. Our PC is not using the Uni as a modem. It uses it as kind of gateway to internet, meaning it use different protocols then with modem connection.
So, after pairing my Uni with my PC in Bluetooth, I got another kind of network connection on my network connections list. It is marked as closed connection with red mark on Bluetooth icon on this list. Then I go to internet sharing in my Uni and select Bluetooth Pan option and then click “Connect”. It establishes its own connection to internet using setup, previously configured in my Uni.
Then, in my PC I go to Network connections list and just click “Bluetooth network connection” icon. This makes my PC to connect with my Uni via Bluetooth using network (TCP/IP) protocol and use it as normal internet gateway. If I click the icon once more, then I get window showing standard connection with bites transferred, buttons for options, disconnection and so on. It shows that the connection is with 1Gb/s, but this is only for connection with my Uni. The connection from Uni to Internet is , obviously much slower and depends of local conditions and 3G standard.
Hope I could help.
Edit:
If I try to do the same over USB, then there is a problem. After connecting USB cable, my PC automatically goes into AS mode and syncs with my Uni. Then If in internet sharing I select USB and click "Connect" the syncing stops, AS in Uni shuts down (this is OK), but my PC try to install a new driver for new device and it does not find it, so it can not recognize my Uni as a proper gateway to connect with over USB. If it would install a driver then on Network connections list a new connection should show up, probably named as "USB network connection".
That’s the other reason I do not use it this way.
Show second and third post. Expain how to quit USB in AS to use this feature.
I will try this trroght BT, but (for me) via Cable is better, the pda is charging all the time. Via Bluetooth the battery goes down quickly.
People need help. I flashed my cingular 8125 with crossbow reloaded rom, its great but cannot seem to understand how to use internet connection sharing to get my laptop online. under network connections i can see that my phone is connected to the internet. but my laptop refuses to browse any site. i have winxp.
raghav.kas said:
People need help. I flashed my cingular 8125 with crossbow reloaded rom, its great but cannot seem to understand how to use internet connection sharing to get my laptop online. under network connections i can see that my phone is connected to the internet. but my laptop refuses to browse any site. i have winxp.
Click to expand...
Click to collapse
Check your firewall. In this mode, you are loged to a new network with different IP than your IP from your home network, if any. Using internet sharing your computer gets IP from your PPC. In my case it is 192.168.0.xx and the gateway is 192.168.0.1. It means that if your firewall was set to accept your home network with different IP, then you have to set it to accept this new IP as well. Oherways you will not get any comunication through this chanell. Of cource, this suggestion is valid only if you have any other firewall then Windows Defender.
juanjillo said:
Show second and third post. Expain how to quit USB in AS to use this feature.
I will try this trroght BT, but (for me) via Cable is better, the pda is charging all the time. Via Bluetooth the battery goes down quickly.
Click to expand...
Click to collapse
I am using this in Vista. There is something named as Center for Windows Mobile Cervices. This is Vista version of AS. Here I do not need to quite USB and AS. Simply set Internet sharing option in your PPC for Bluetooth PAN and then click "Connect" in PPC. After that, click "Bluetooth Network Connection" in your Network Connections List in the PC. You will get the page with list of bluetooth access points. You should see your PPC device marked as the default device. Bellow you have "Connect" button. Click it and you are done.
By the way, the second and other posts describe the attempt to connect in the old way using modem connection. WM6 does not provide the modem support for PC connection. It means that officialy you can not use WM6 device as a modem like with WM5 or Symbian devices. However, HTC has released the modem driver for WinXP and Vista for new WM6 as an after market support. You can google for this on HTC pages. I never used this, cause this new way seems to me a lot easier. Also I never heard about anybody who succeeded with does drivers.
I use Windows Xp and the firewall is OFF
With the new WM6 rom of Ivan works for me
http://forum.xda-developers.com/showthread.php?t=305512
wakko said:
You have to disable the USB connection in activesync on your PDA, as well on your laptop. Mine worked with WM05!
Click to expand...
Click to collapse
Hi, just checking, my O2 WM5 rom don't come with the "Internet Sharing" program.
May I know how to get it?
My current rom version is 1.30.107
Does anyone know how to configure the remote desktop in WM6 to connect through GPRS. I have managed to get it to connect through a USB cable no problem but when I disconnect the cable and try it through GPRS it just says no connection and doesnt even try to connect to GPRS.
Any help appreciated.
Any specific program that you're using?
yeh would be good to know if this is possible i used Remote Desktop Mobile but all i can get is it to connect over wifi with the computer on that network, never over a data connection.
Try opening up internet explorer mobile first, let that connect to the internet for you through gprs and then run the remote desktop application.
I have installed Gremote, Salling Clicker and Mobile Remote, but I can't make them work on my mobile (LG MS25).
Gremote: The major problem is that the program cannot discovery the PC IP, even with activesync, Ad-Hoc network.
Salling Clicker: Does not recognize the smartphone bluetooth, so it's impossible to connect.
MobileRemote: I'm not sure what the problem is, but the program shows an error (There was an error connecting to the computer. Please ensure that your computer is on, has Bluetooth enabled, and has an active pairing with this machine).
I've tried to make ActiveSync connections and Ad-hoc to enable the communication, unfortunately I got no results. Could anyone help me?
I am using Cingular 2125. I want to access the internet connection of my PC via my smartphone. My laptop runs on Windows Vista. The internet connection on my laptop is through a proxy(wifi). My phone doesn't have wifi. Plz help.
u can try smart tweaker and use the internet passthrough feature.
Hi, I have a softphone installed on my laptop. I connect headset(speaker+mic) on my laptop, and speak via the softphone.
The problem is I have to restrict my movement, as the headset I have is a wired one.
So I thought of using my Windows mobile phone as headset to my laptop. That way, I can carry by mobile phone and walk around while speaking.
Configurations:
My laptop has Bluetooth and connected to Wireless network
My Windows mobile phone has Buletooth and connected to same wireless network
I am trying to figure out a way to connect my Windows mobile to my laptop so that I can use my windows mobile phone to send audio input to my laptop and recieve audio output from my laptop.Basically, I wanted to use the softphone installed on my laptop through windows mobile phone.
I tried searching in google, but couldn't find any such solution. I am looking for some solution that may make use of any of these:
Windows Mobile Remote Desktop Connection
Windows mobile Bluetooth pairing to my laptop
well, the operating system I have is Windows Mobile 6.1