Related
PLEASE GO TO MY OTHER LINK, ALL INCAP'D in an UPDATE.ZIP!!!
FOR SAPPHIRE
I read a post earlier about fixing some apps not working.
in build.prop
change to 4 instead of 5.
ro.build.version.sdk=4
Did this and re-ran part 1 and part 2. Works fine with Handcent and facebook app working. haven't got any FC with other apps and navigation still working after a few hours and some reboots.
Uploaded a new .rar with changes to build.prop
http://www.mediafire.com/?jwhmkzay2mm
Extract All to Desktop
Run part 1 - when prompted hit any key and phone will reboot.
when up and running, run part 2.
Test nav by opening google maps and geting directions. Underneath "Show on Maps" you should see "Navigate" If you don't try installing Google Voice (fixed it for a lot of people)
If you did the above and Navigate isn't working, here is a link to the build.prop version that causes some app errors but gets nav Working
http://www.mediafire.com/?tyzmnzzkhen
Skreacher said:
FOR SAPPHIRE
I read a post earlier about fixing some apps not working.
in build.prop
change to 4 instead of 5.
ro.build.version.sdk=4
If you did the above and Navigate isn't working, here is a link to the build.prop version that causes some app errors but gets nav Working
http://www.mediafire.com/?tyzmnzzkhen
Click to expand...
Click to collapse
Did you mean to post in here??
lol
Was looking for the other thread actually=p... Where i posted the same instructions=p.
Thanks man
theomajigga said:
STEPS:
1. rootedbase.zip
2. reboot
3. wipe
4. cynwmap.zip
Click to expand...
Click to collapse
Thank for putting this all together - i'll try it later on today.
Quick question though, why would you wipe after you install the rooted base? Would that not defy the point of installing the rooted base in the first place? Shouldn't it be: 1. Wipe, 2. rootedbase.zip, 3. Reboot, 4. cynwmap.zip?
novat said:
Thank for putting this all together - i'll try it later on today.
Quick question though, why would you wipe after you install the rooted base? Would that not defy the point of installing the rooted base in the first place? Shouldn't it be: 1. Wipe, 2. rootedbase.zip, 3. Reboot, 4. cynwmap.zip?
Click to expand...
Click to collapse
Yeah that looks correct to me. My understanding was 1. Wipe 2. Flash base 3. Reboot in recovery again 4. Flash Cynwmap
Also: If we already are already running CM 4.2.3.1 can we just flash the cynwmap.zip over the top without worrying about flashing the base again?
if i wanted to just run part 1.bin how would i do this? i tried and i got some errors about the files not existing.
novat said:
Also: If we already are already running CM 4.2.3.1 can we just flash the cynwmap.zip over the top without worrying about flashing the base again?
Click to expand...
Click to collapse
That should work to push the correct buid props, the reason that the rooted base was put in there, was to add the maps to the original package...
I'm going to modify this later tonight to make it just a patch update deal...
Got a micro-bio test in the AM
and yes, i had the first two instructions fliped.. i'll edit to correct it.
What are the odds Cyanogen puts something like this in the next update?
I hope so
ps, first post, been rooted and running Cyanogenmod for a week or so now, really digging it.
SwashbucklerJak said:
What are the odds Cyanogen puts something like this in the next update?
I hope so
ps, first post, been rooted and running Cyanogenmod for a week or so now, really digging it.
Click to expand...
Click to collapse
unfortunately 0.... if you look back in the news he got a C&D from google...
I forgot about that.
Well is there a way to make a quick patch job of it for noobs like myself?
I tried this exactly was instructions said...but couldn't get navigation...
I went to "get directions" and typed in the addresses and whatnot, but didn't get any navigation? Maybe someone can enlighten me (isn't it supposed to be turn by turn voice?). Thanks
no offense to the Original Poster but...
can anyone else confirm that this actually works?
i really want Google Maps Nav on my phone!!!
Thanks again to the OP for this.
EDIT!
aha jabbawalkee just answered my post. lol
jabbawalkee said:
I tried this exactly was instructions said...but couldn't get navigation...
I went to "get directions" and typed in the addresses and whatnot, but didn't get any navigation? Maybe someone can enlighten me (isn't it supposed to be turn by turn voice?). Thanks
Click to expand...
Click to collapse
Let me check...
I used it on my mt3g with the danger/death spl. partitioned my sd 3 ways.
I'll try it right now again...
jabbawalkee said:
I tried this exactly was instructions said...but couldn't get navigation...
I went to "get directions" and typed in the addresses and whatnot, but didn't get any navigation? Maybe someone can enlighten me (isn't it supposed to be turn by turn voice?). Thanks
Click to expand...
Click to collapse
did you get a prompt to download the voices??
theomajigga said:
did you get a prompt to download the voices??
Click to expand...
Click to collapse
No...nothing of the sort. It just looked like the normal Google Maps app to me
My steps EXACTALLY
Ok here's what I did, and its only for the **mt3g** (possibly the sapphire)
1. used amon's recovery and partitioned my card 3 ways.
2. enabled USB mass storage from recovery
3. Wiped
4. choose update ---> rooted base.zip
5. reboot right into recovery
6. wipe again (probably repetitive)
7. choose update ---> cyan w map.zip
8. wipe again for good measure (again probably repetitive)
9. reboot
at this point i get the familiar cyan boot, it goes into the setup and says welcome to droid.
I skip all setup because I have to use wifi, probably not relevant but that is what I do.
Enable wifi.
click on maps (which you will see has a different logo now)
enter 2 USA addresses
click get directions
it finds directions and right under show on map, it says navigate.
clicked on navigate.
I then get prompted to download voices, click download
sign-in to google shiz
download voice pacakage
rerun maps and do a directions again
click navigate
EDIT:
There is a possibility that you will have to clear the data that is stored in the applications:
Settings
Applications
scroll to maps
Click on clear data
done.
jabbawalkee said:
No...nothing of the sort. It just looked like the normal Google Maps app to me
Click to expand...
Click to collapse
I'm trying it again as we speak...
If this works, there is a couple more changes I am going to make, but I first want to see if people can get this working.
On how to add a different keyboard?? I can't seem to get it working.
Thanks.
What rom are you running? Also, is this a keyboard you've installed but can't seem to select? Some keyboards you have to activate first by going to Settings and under the Language & Keyboard section before it will show up in your Input Methods list of keyboards for you to be able to select it.
sjmoreno said:
What rom are you running? Also, is this a keyboard you've installed but can't seem to select? Some keyboards you have to activate first by going to Settings and under the Language & Keyboard section before it will show up in your Input Methods list of keyboards for you to be able to select it.
Click to expand...
Click to collapse
Stock with added proformance pack. I installed swiftkey, and tried to select it and it didn't
work. I seen that the file need to be moved and have values changed, which I tried, but
could not get it working.
Mrhorology said:
On how to add a different keyboard?? I can't seem to get it working.
Thanks.
Click to expand...
Click to collapse
until some makes a video, i will give you text ver.
Using a Different Keyboards.
1. You need to install the keyboard you want, from the Market or sideload the apk.
eg. thumb.apk
2. once installed, go to settings->Language & Keyboard, and see if that keyboard needs to be enabled.
- some keyboard needs enabled from the settings.
3. From the browser or search or on any input area, Long press ( press and hold your finger) until it pops-up the option to select input method.
From that list select your keyboard.
palagai said:
until some makes a video, i will give you text ver.
Using a Different Keyboards.
1. You need to install the keyboard you want, from the Market or sideload the apk.
eg. thumb.apk
2. once installed, go to settings->Language & Keyboard, and see if that keyboard needs to be enabled.
- some keyboard needs enabled from the settings.
3. From the browser or search or on any input area, Long press ( press and hold your finger) until it pops-up the option to select input method.
From that list select your keyboard.
Click to expand...
Click to collapse
I did that, but it won't let me enable swiftey
Ok, you din't state your full picture in the initial post. The step i listed is for Market or apk which would install properly.
For you, google is your friend, try 'rothnic swype'
palagai said:
Ok, you din't state your full picture in the initial post. The step i listed is for Market or apk which would install properly.
For you, google is your friend, try 'rothnic swype'
Click to expand...
Click to collapse
Not sure what your saying. There is a way to any keyboard, but it seems to enable it, you
need to move the file then change values or something like that.
rothnic had some hack for swype keyboard, so i thought you you could follow some of his steps for the permissions.
palagai said:
rothnic had some hack for swype keyboard, so i thought you you could follow some of his steps for the permissions.
Click to expand...
Click to collapse
I will check it out, but if its the same steps then I still need a video on how to do it.
Mrhorology said:
I will check it out, but if its the same steps then I still need a video on how to do it.
Click to expand...
Click to collapse
Well I couldn't find those rothnic swype threads. It seems they were deleted.
Mrhorology said:
Well I couldn't find those rothnic swype threads. It seems they were deleted.
Click to expand...
Click to collapse
Look here... http://forum.tegratab.com/viewtopic.php?f=8&t=43
sjmoreno said:
Look here... http://forum.tegratab.com/viewtopic.php?f=8&t=43
Click to expand...
Click to collapse
The thing is I don't want swype. I want to use something else, and I don't see anyhing there
that's going to help me. I
Mrhorology said:
The thing is I don't want swype. I want to use something else, and I don't see anyhing there
that's going to help me. I
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=856476
Read that, its as basic as you are going to get.
tristanwolf1134 said:
http://forum.xda-developers.com/showthread.php?t=856476
Read that, its as basic as you are going to get.
Click to expand...
Click to collapse
I did all that, and it still didn't work. This is why I was hoping someone could maybe make a video...
Try
Try a different Keyboard and see if you can get it to work with the steps given. If you can then maybe try and reinstall the keyboard you want.
Just a thought.
WantADroid said:
Try a different Keyboard and see if you can get it to work with the steps given. If you can then maybe try and reinstall the keyboard you want.
Just a thought.
Click to expand...
Click to collapse
Tried that also. I tried to install thumb keyboard and got the same result.
I hope maybe someone wont mind maybe making a video that shows how
to do this...
This worked for me:
Download the files from here:
http://forum.xda-developers.com/showpost.php?p=9532446&postcount=1
1. Put the "Replace_TNT_Settings.zip" in you internal SDcard.
2. rename it "Update.zip"
3. Reboot into CWM recovery and choose "apply sdcard:update.zip"
4. once done reboot system
5. Go to settings> language & keyboard
6.enable you keyboards
7. Put the "Rollback_TNT_Settings.zip" in you internal SDcard
8. rename it Update.zip
9. Reboot into CWM recovery and choose "apply sdcard:update.zip"
10. once done reboot system
11. long press on a text entry field and select your keyboard of choice.
I now have the Swiftkey keyboard and thumb keyboard working. Swipe Force closes on me (I'll see if I can get a different Swipe version to work).
Hello,
with several roms every week, suddenly appears this image.
After showing and select "force close" comes again and again and again. Then I reboot the device and the same problem. I have to reinstall again the rom or install a new one, but as i mention before, it happens every week.
I am going to appreciate if someone told me why happens.
Thanks a lot in advance.
ortigosano said:
Hello,
with several roms every week, suddenly appears this image.
After showing and select "force close" comes again and again and again. Then I reboot the device and the same problem. I have to reinstall again the rom or install a new one, but as i mention before, it happens every week.
I am going to appreciate if someone told me why happens.
Thanks a lot in advance.
Click to expand...
Click to collapse
1. are you using cm7 or any cm7 based roms? if you are, do not use the 2g/3g toggle in the cm power widget. that is a known issue.
2. have you ran a fix permissions? this is needed every once in a while especially if you are flashing different roms. theres a few ways to do this. you can run fix permissions in whatever recovery you are using on your nexus s, except stock recovery. or you can do it via terminal emulator on you phone. open the terminal emulator, type su(press enter) fix_permissions(press enter)
Fix permissions and clear cache!!!!!!
Sent from my Nexus S 4G using xda premium
simms22 said:
1. are you using cm7 or any cm7 based roms? if you are, do not use the 2g/3g toggle in the cm power widget. that is a known issue.
2. have you ran a fix permissions? this is needed every once in a while especially if you are flashing different roms. theres a few ways to do this. you can run fix permissions in whatever recovery you are using on your nexus s, except stock recovery. or you can do it via terminal emulator on you phone. open the terminal emulator, type su(press enter) fix_permissions(press enter)
Click to expand...
Click to collapse
First of all, thanks for your answer.
1)I am using cm7.
2)Till now i never used this option called "fix permissions"
I disabled the 2g/3g toggle and I fixed permissions, i hope now works better...if the problem comes i will let here know.
Thanks a lot!
Ok. 2 things for you smarties-
A. Flashed MHX's superlite4.2 and lost my abilities to see, let alone download chrome and facebook in the Play Store(and probably more... havnt looked much further than that)
Re-flash?
B. Also, I havnt seen say anything about this yet, but in CWM (both touch and normal) when i go to clear the dalvik cache i get an "E:unknown volume for path [/sd-ext]" along the bottom when i click the "wipe Dalvik Cache" button. Note: this is not when i actually go to clear it, just when i hit the button before the no/no.../yes/no... prompt.
I one-clicked and rooted twice, and this was there both times.
***Edit- did some more searching, NVM on part B. Figured it out. Nothing to worry about!!
Thanks for your help! You guys rock!
try this first:
http://www.mediafire.com/?2bzkpwmwc652vn8
clear data under applications for google play, then install this within regular menu, from astro or any other filemanager
run and reconfigure. I you still can't find them then yes, perform a darkside/reflash
And yes, as you already figured out. "E:unknown volume" is nothing to worry about
thanks icenight89!
I ended up doing a darkside and flashing nexusmod ICS... Looks like it's more of what i want for the time being.
You da BOMB!
icenight89 said:
try this first:
http://www.mediafire.com/?2bzkpwmwc652vn8
clear data under applications for google play, then install this within regular menu, from astro or any other filemanager
run and reconfigure. I you still can't find them then yes, perform a darkside/reflash
And yes, as you already figured out. "E:unknown volume" is nothing to worry about
Click to expand...
Click to collapse
I have the same problem with Facebook not compatible. I downloaded that file but can't figure out how to install it.
Use this method http://codekiem.com/2012/02/24/apk-downloader/
I also attached the facebook app.
View attachment com.facebook.katana-11090.apk
kishke said:
Use this method http://codekiem.com/2012/02/24/apk-downloader/
I also attached the facebook app.
View attachment 979294
Click to expand...
Click to collapse
For all the people who care about legal things:
3.3 You agree not to access (or attempt to access) the Market by any means other than through the interface that is provided by Google, unless you have been specifically allowed to do so in a separate agreement with Google. You specifically agree not to access (or attempt to access) the Market through any automated means (including use of scripts, crawlers, or similar technologies) and shall ensure that you comply with the instructions set out in any robots.txt file present on the Market website.
Click to expand...
Click to collapse
promiseofcake said:
For all the people who care about legal things:
Click to expand...
Click to collapse
who cares?
I already have the apk of it. I would like a fix to make it compatible with the ROM superlite 4.2 . I guess I'll ask on the ROM thread.
This is out dated please use the zip flashed in recovery provided by team synergy. Thanks
http://forum.xda-developers.com/showthread.php?t=1852255
[HOWTO]Comprehensive IMEI/EFS Backup
[HOWTO]Comprehensive IMEI/EFS Backup
Anycut worked great. I'm all backed up.
Sent from my SCH-I535 using Tapatalk 2
Glad I could help out guys.
Sent from my SCH-I535 using Tapatalk 2
Thanks worked perfectly.
Thanks
Sent from my SCH-I535 using Tapatalk 2
glad i could help out. i know re flashing just to back up is a pain in the you know what. so i figured i would share how i avoided going back to stock
:good::good:
Thanks Man apprcieate it super easy!
Great stuff, thanks alot for the peace of mind! I was one of, if not the first to have this IMEI wipe thing with Imoseyon's first test of the leankernel, and been wary of it ever since.
PLEASE NOTE: This appears to require a stock kernel. I was on Imoseyon's latest v2 beta (non-kexec) and could not get this to work properly. Simply went into cwm and flashed the return-to-stock zip that he has listed in his thread on rootz and tried again, and it worked perfectly! Just be sure to follow ALL steps in this exact order, and you'll be golden.
Great write up bro. I really appreciate the extensive instructions! Super easy and fool proof
Sent from my Glazed-over Nexus 7
After that open any cut. create a shortcut to the hidden menu. to do this click on new shortcut. then click on activity. scroll down until you see IOTHiddenMenu. click on it . it should make a short cut to the hidden menu.
Once in the menu, choose the option for USBSettingsMenu, then choose the option RMNET+DM+MODEM.
Not sure how to do the shortcut to the hidden menu. How did I start a new shortcut?
NAU420 said:
After that open any cut. create a shortcut to the hidden menu. to do this click on new shortcut. then click on activity. scroll down until you see IOTHiddenMenu. click on it . it should make a short cut to the hidden menu.
Once in the menu, choose the option for USBSettingsMenu, then choose the option RMNET+DM+MODEM.
Not sure how to do the shortcut to the hidden menu. How did I start a new shortcut?
Click to expand...
Click to collapse
Click on the button that says new shortcut in anycut bro. It isn't that hard. Not trying to be a ****
Sent from my SCH-I535 using Tapatalk 2
This guide should be pretty easy. Don't speed read it though. Read and fallow the steps as you read them makes life much easier. Also keeps you from feeling like dbag. Lol
Sent from my SCH-I535 using Tapatalk 2
bgolden84 said:
Click on the button that says new shortcut in anycut bro. It isn't that hard. Not trying to be a ****
Sent from my SCH-I535 using Tapatalk 2
Click to expand...
Click to collapse
OK and this button is locate where?? If I knew where the button was, I won't be asking.
NAU420 said:
OK and this button is locate where?? If I knew where the button was, I won't be asking.
Click to expand...
Click to collapse
Did u install anycut? Did you open anycut? If you did these things then You would not be asking these questions. Ether that or you are blind. Open the application anycut and you will see a button in the middle of the screen that says. NEW SHORTCUT
Again not trying to b a ****. I just don't understand how you are having issues. Unless you didn't install anycut. There is a link at the bottom of the first post to the apk
Sent from my SCH-I535 using Tapatalk 2
Yaowza.....
-UNLOCKED VZW GSIII
bgolden84 said:
Ok it seems there are some people that are a little lazy or simply dont want to go back to stock to back up there imie. i will list the steps that i used to backup my imei running synergy nightly. i barrowed most of the steps from this link
i take no credit for this i am just trying to help some of you out
should work on any TW based rom
All credit to Peoplearmy for the intial write-up
http://rootzwiki.com/topic/32397-tutorial-imei-backup-nv-with-qpst-us-variants/
by now you know that the hidden menu will not open in most custom roms. this does not apply to aosp roms or aokp . here is what i did
and as usual if u bork your phone nmp. so dont get mad at me
link to anycut.apk is at the very bottom of this post
Now go to your phone, its time to enable the hidden menu. On Verizon or Sprint, go to the dialer and dial *#22745927 . Choose the option to enable the Hidden Menu. After that open any cut. create a shortcut to the hidden menu. to do this click on new shortcut. then click on activity. scroll down until you see IOTHiddenMenu. click on it . it should make a short cut to the hidden menu.
Once in the menu, choose the option for USBSettingsMenu, then choose the option RMNET+DM+MODEM. Hook up the phone to the PC via USB at this time if you haven't already. This option works on STOCK TOUCHWIZ (it can be rooted).
OK. Now go to your PC Control Panel. We need to get into the Device Manager to determine where your phone is being recognized as far as the COM ports. For this, go to System -> Device Manager (on the left) or System -> Hardware -> Device Manager (depends on your Control Panel setup). Anyways, scroll down to Ports (may say Ports & LTP, Serial, depends on version). Anyways, find your phone under it, and take note of the COM# (mine was COM9, yours can and probably will vary). If you have exclamation marks anywhere then install the Samsung drivers and try again.
OK. Now go to Start Menu -> All Programs -> QPST -> QPST Configuration
Click on the Ports tab. Click on Add New Port, then add your Port# where it says Port and name it something you can remember. Hit OK.
Now click on Start Clients -> Software Download. Click on the Backup tab. Make sure your phone is listed under Port. If its not, hit Browse, choose the COM that is your phone, and hit OK. Now where it says QCN File, hit Browse, find a safe spot to store your backup on your PC, and name it. Hit OK. Now hit Start. Make sure backup gets to 100% with no errors.
Congratulations, you now have your backup made! Flash away!
Don't forget to go into your phone hidden menu again and change USB mode back to MTP so you can use it to access the phone storage.
If it bricks sometime in the future:
Go back into QPST. Go to Start Clients -> Software Download. Click on the Restore tab. Make sure your phone is listed under Port. If not, browse to the appropriate COM port. Choose your QCN backup in the other box. Click Start, let it finish. Phone should reboot. If it fails rebooting, just do a manual reboot. First boot will take a bit, let it do its thing.
AS PER THE USUAL, I TAKE NO RESPONSIBILITY FOR WHAT YOU DO TO YOUR DEVICE! IF YOU FOLLOW THESE STEPS -TO A T- YOU SHOULD HAVE NO ISSUES, BUT QPST IS A VERY POWERFUL PROGRAM, SO KNOW WHAT YOU ARE DOING!
HAPPY FLASHING!
http://forum.xda-developers.com/attachment.php?attachmentid=1267214&d=1345256454
Click to expand...
Click to collapse
PLEASE show me where it says to install any cut??????????????????????????
Am I the only one scratching my head at the question of where is the button to create a shortcut?
SMH
Sent from my SCH-I535 using Tapatalk 2
"link to Anycut.apk is at the bottom of the page"
-UNLOCKED VZW GSIII
NAU420 said:
PLEASE show me where it says to install any cut??????????????????????????
Click to expand...
Click to collapse
Ok I'm going to be very calm. How the hell do you open an app that you don't have?
It's common sense. Man if the guide said to open tapatalk and you didn't have the app one would assume you download it. That way you can open it
And feel free to facepalm yourself. The Apk for anycut is linked in the post. So why would you not install it if you didn't have it?
Sent from my SCH-I535 using Tapatalk 2
If you can not take the time to read the entire post you don't need to be Modding your phone bro
Sent from my SCH-I535 using Tapatalk 2