This is now dead
I believe this thread is newsworthy
fresh flash caused reboots for me.
look at who's kernel fixed that
So far what works:
USB mount,
calling (speakerphone too) dunno about the other person hearing me because I called my voicemail as a test, but it worked.
3g works
sms/mms
physical kebyboard, (somewhat, no fn key)
What doesnt:
wifi
camera
capacitive button lights
on screen kb
physical kb lights
wifi
I haven't tested bluetooth or gps.
Honestly, this isn't far behind ICS.
200mb of free ram right now
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
That's awesome that we got a booting Jellybean! Nice work sir.
Sweet all I need is WiFi on this ROM and then I'm happy.
Sent from my HTC Evo Shift using xda app-developers app
I'm assuming no 4G? Sparks has the modules in his kernel...
Shifted from Outer Space
Man you beat me I was just compiling :/ but nice work.. ill keep going today so we might have 2 new jelly bean Roms today. I'm building from source. What are you doing?
Sent from my VS920 4G using xda premium
megaghostgamer said:
Man you beat me I was just compiling :/ but nice work.. ill keep going today so we might have 2 new jelly bean Roms today. I'm building from source. What are you doing?
Sent from my VS920 4G using xda premium
Click to expand...
Click to collapse
Evervolv has their own source. I'm going to see if I can push the kernel and modules to the device tree.
Holy cow!
Sent from my HTC Evo Shift using Tapatalk 2
Ok ... I've got a github and everything at the moment so I'll be working on that today. I think from all of what I got to do, I can either finish today or finish early tomorrow. I don't much to do anymore. I currently can not use this Rom due to my shift being deactivated. I have to have wifi :\ sucks buts the cold truth. Also later on I can get Paranoid CM10 working Easy. To be honest it was a weird day I was trying to port it into my cm9 and it actually booted. I don't know if that was " considered " Jelly Bean but I couldn't get into settings, it was FC. So I just trashed it but right now I'm working with Shelnutt2 and thanks for the work dev's! With 2 JB roms we can get somewhere fast!!
tuvm!
[chomping at the bit.
---------- Post added at 06:03 PM ---------- Previous post was at 05:58 PM ----------
thronnos said:
I'm assuming no 4G? Sparks has the modules in his kernel...
Shifted from Outer Space
Click to expand...
Click to collapse
4g would be awesome!
trsix said:
[chomping at the bit.
---------- Post added at 06:03 PM ---------- Previous post was at 05:58 PM ----------
4g would be awesome!
Click to expand...
Click to collapse
I heard preludedrew was also working on wimax, so maybe its just a matter of time
Sent from my HTC Evo Shift using xda app-developers app
If the link in the original post does not work for you, here is an alternate link. http://goo.im/devs/evervolv/Releases/EvoShift4G/Evervolv-Artis-3.0.0p1-speedy.zip
kernel
jesuscash said:
I believe this thread is newsworthy
fresh flash caused reboots for me.
look at who's kernel fixed that
So far what works:
USB mount,
calling (speakerphone too) dunno about the other person hearing me because I called my voicemail as a test, but it worked.
3g works
sms/mms
physical kebyboard, (somewhat, no fn key)
What doesnt:
wifi
camera
capacitive button lights
on screen kb
physical kb lights
wifi
I haven't tested bluetooth or gps.
Honestly, this isn't far behind ICS.
200mb of free ram right now
Click to expand...
Click to collapse
have a link to that kernel? mine boots but reboots a few seconds later.
trsix said:
have a link to that kernel? mine boots but reboots a few seconds later.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1764992 in attached files the most recent is "sparksco-Kernel-BFS-ZRAM-AOSP-20120802.zip"
Enjoy!
ok i have bt working and connected to headset. however no audio from media, no audio from phone (phone is connecting to bt, looks like just media).
wifi is not as mentioned:
Code:
D/WifiService( 1470): setWifiEnabled: true pid=2584, uid=1000
E/SoftapController( 1226): SIOCGIPRIV failed: -1
E/SoftapController( 1226): Softap fwReload - failed: -1
E/WifiStateMachine( 1470): Failed to reload STA firmware java.lang.IllegalStateE
xception: command '66 softap fwreload eth0 STA' failed with '400 66 Softap opera
tion failed (No such device)'
W/CommandListener( 1226): Failed to retrieve HW addr for eth0 (No such device)
D/CommandListener( 1226): Setting iface cfg
E/WifiStateMachine( 1470): Unable to change interface settings: java.lang.Illega
lStateException: command '68 interface setcfg eth0 0.0.0.0 0 down' failed with '
400 68 Failed to set address (No such device)'
I/wpa_supplicant( 4065): rfkill: Cannot open RFKILL control device
E/wpa_supplicant( 4065): Could not read interface eth0 flags: No such device
E/wpa_supplicant( 4065): WEXT: Could not set interface 'eth0' UP
E/wpa_supplicant( 4065): eth0: Failed to initialize driver interface
I/logwrapper( 4064): /system/bin/wpa_supplicant terminated by exit(255)
megaghostgamer said:
Ok ... I've got a github and everything at the moment so I'll be working on that today. I think from all of what I got to do, I can either finish today or finish early tomorrow. I don't much to do anymore. I currently can not use this Rom due to my shift being deactivated. I have to have wifi :\ sucks buts the cold truth. Also later on I can get Paranoid CM10 working Easy. To be honest it was a weird day I was trying to port it into my cm9 and it actually booted. I don't know if that was " considered " Jelly Bean but I couldn't get into settings, it was FC. So I just trashed it but right now I'm working with Shelnutt2 and thanks for the work dev's! With 2 JB roms we can get somewhere fast!!
Click to expand...
Click to collapse
Yeah the more the merrier lol! So hey if you want to add the kernel to your builds looks at these commits. The top six ones from me are the ones to add the kernel to the device tree. Just make sure you remove all other kernel modules
https://github.com/pbeeler/android_device_htc_speedy/commits/jellybean
would you like for me to port CM10 Paranoid using this as a base? Maybe wifi fix and other stuff can be fixed
also gps appears to be working for me.
Sent from my PG06100 using Tapatalk 2
suprisingly
Smooth.
if you turn off the hardware keyboard the on screen one will work, in settings
also if you turn off autobrightness the captive and keyboard lights work
Related
Here we have 2 senseui ports for the droid1. most of the hardware works at this stage, ppp/data/3g is broken as well as camera and bluetooth, everything else is working.
THANKS:
eeaarrll(mass storage code)
dexter_nlb(fixwireless_db, usb_mass_storage_fix(not needed but the lights help ), init_prep_keypad.sh, some init.* services I used from you)
vilord&dzo(htcgeneric_ril source)
p3droid(kernel source)
foobar(for your modem.apk(that i still need to get working))
htc&motorola(for all the hell you have made this)
what works:
audio
egl(opengl)-----ummm sort of
accelerometer
battery reading
slide out keyboard(no backlight)(period, comma, spacebar bug)
sdcard(mass storage mode with scripts(mass/unmass))
compcache/swap
calls/sms
wifi (FULLY WORKING NOW)
market works intermittently
gtalk
gmail
google maps
network location(accurate to 60m)
what doesnt:
data
gps
bluetooth
camera
changelog:
v0.000000001(lol)
based off of evo 2.2 rom (avasense rom)
v0.000000002
now based off of incredible 2.2 update
fixed sdcard
v0.000000003
swap/compcache now work
added OClocker.apk overclocking app (by jcase of XDA)
overclocking now works(automatically oc'd to 1ghz on boot)
v0.000000004
switching between different ril libs/bins to get service functional
2 sms' sent successfully 2 recieved succcessfully(no where near stable)
v0.000000005
calls/sms now work
more stable
using generic htc ril
compcache and swap start on boot(must have swap partition as mccblk0p3)
v0.000000006
added BFS patch to the kernel
call bug still exists
2sms bug still exists
wifi works -DO NOT UNLOAD ( if it errors do adb shell rmmod tiwlan_drv )
market force closes,
google setup errors with "cannot find a reliable connection"
pop3 email works
google maps work with network location accurate to 60 meters(not sure if hardware gps is working)
mass storage mode works (THANKS eeaarrll)
v0.000000007
fixed google sign in
market works(may require a reboot or 2) updates and downloads apps (AFTER GOOGLE LOGIN REBOOT THEN MARKET WILL WORK)
keyboard bug with space, comma, and period will be looked at
http://www.jamezelle.com/myfiles/wifitest-gapps-BFS.zip
FULL WIFI PATCH flash over the rom your on its just a rewritten module NOT FULL ROM! http://jamezelle.com/myfiles/fullwifi-patch-SIGNED.zip
versions v.000000008 and 9 have been omitted
v0.1(we are getting there)
based on HTC ACE dump (Desire HD)
calls sms work flawlessly
wifi works thanks dexter_nlb(used a modified version of what you did to libhardware_legacy.so)
market and google login fixed
kb bug fixed
mass storage mode works (THANKS eeaarrll) via 2 shell scripts to enable do
Code:
adb shell mass
to disable do
Code:
adb shell unmass
Download:
www.jamezelle.com/myfiles/ACE-ALPHA3-NANDROID.zip
partition sdcard : with 512mb ext and 128mb-256swap (or it wont boot!)
Here is my current ril sourcecode www.jamezelle.com/myfiles/current-ril-source.zip if any of you devs want to help me tackle data
here also is the motoril source http://www.jamezelle.com/myfiles/motorola-ril-source.zip (is essentially droid1 ril with changes for droidx)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
i will update this thread as i fix things
hit me up on IRC @ irc.andirc.net #droid(if im not there you can also find me in #droideris)
I'm in now we need a #Team name so we can be trendy.
Is the build posted anywhere, or is this more of a closed open-source project? lol
WOOT! Please finish this for the world. I really like the Sense UI and would definitely like to have this.
Sent from my Droid using XDA App
twistedumbrella said:
Is the build posted anywhere, or is this more of a closed open-source project? lol
Click to expand...
Click to collapse
ill post it when its more stable, if you want to help pm me and ill give you what i have so far.
Awesome! I'd love to test if you ever need a tester in the future but for now ill just subscribe and hope for the best
I'd also like to help but no computer, if there's anything I can do like test, let me know. I'd like to see sense on Droid. Even better when its done it gets themed. The mytouch 3g had ported over to my Eris when I had it had nice themeing.
Sent from my Droid using XDA App
this would be amazing if you got 2.2 sense on the droid working completely. i dont know much, but i would love to help if i can. this would be awesome. good luck, i hope this works.
maybe a zeusdroid member could help you with stuff.
+1
10 char!
jamezelle = l337
Although I'm of no use when it comes to the actual development, I'll donate and test if you guys get anywhere with this. Good luck!
now we'r talking
looking forward to whats coming.
finals are over on friday but i will be checking daily
we'll be glad to test
I really want to see this go somewhere. Do you have anyone else on the developement end to help you? Im sure ton of people wll test, but developers will be important unless you are really good. Are you making progress, or are you going to ask other devs for help. I can contacts some if it will help.
Sent from my Droid using XDA App
omg.... yeSSSS finally a really really cool rom
This is exciting. Id love to test, no knowledge of coding though :/
Sent from my Droid using XDA App
Well I can't sleep, so I think I'm going to play with this idea for a minute and see what happens
twistedumbrella said:
Well I can't sleep, so I think I'm going to play with this idea for a minute and see what happens
Click to expand...
Click to collapse
what idea would that be?
Awesome! I was bummed that they cancelled the Zeusdroid project, especially all of the support and donations that poured in. I just wish they would release their work to benefit everyone else.
i hate that as well
hopefully this project will not be cancelled
The project won't be canceled. Development might not move at the speed of light but it is moving along.
Sent from my HERO200 using XDA App
jamezelle said:
what idea would that be?
Click to expand...
Click to collapse
Was taking a look into ZeusDroid, which did work (except for the whole phone issue) and some of the running Milestone versions of sense and seeing about a FrankenDroid.
While poking around in the hidden app menu on the stock firmware I found this audio Cal menu. Only thing its in hexedecimal and I don't know it too much. Basically this menu will allow us to safely boost the speaker volume on our phones. Screenshot below. If anyone can help please chime in. I remember on the N1 audio.boost was impossible until cm7.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my LG-P999 using XDA App
How'd you find this menu? Ill readup and play with it...
Sent from my LG-P999 using XDA App
crx4xharder said:
How'd you find this menu? Ill readup and play with it...
Sent from my LG-P999 using XDA App
Click to expand...
Click to collapse
Thanks. Hidden menu --> device test--> sound test --> audio Cal -->Spk (spk out)
Sent from my LG-P999 using XDA App
Aren't the speakers too poor of quality to boost further? Or am I the only one that has ****ty speakers?
Sent from my rooted G2X
Ok I tried to change values, but it won't except anything, always has an error. I was, however, able to get an almost instantaneous gps lock between gps status from the market and the gps "system settings" in the hidden menu. Until now I was lucky if I got gps lock within 20 minutes outside. Now 10 seconds inside!
Edit: I spoke too soon... I tried so hard to lose the lock that I actually did lol. Now I cant get it back... DOH!
Sent from my LG-P999 using XDA App
How do we get into this "hidden menu"? lol
http://forum.xda-developers.com/showthread.php?t=991449
Sent from my LG-P999 using XDA App
DrowsyMalice said:
Aren't the speakers too poor of quality to boost further? Or am I the only one that has ****ty speakers?
Click to expand...
Click to collapse
I *rarely* here my phone ring. Even when it's sitting on my desk right next to me. Same goes for setting an alarm. I know the speakers are capable, but for some reason it just goes of as if the volume was set to 1%.
crx4xharder said:
http://forum.xda-developers.com/showthread.php?t=991449
Sent from my LG-P999 using XDA App
Click to expand...
Click to collapse
Thank you kind sir.....I spend 99% of my time in dev sections, trying to keep them clean. I should start poking around in the General area as well huh lol
Mikey1022 said:
Thank you kind sir.....I spend 99% of my time in dev sections, trying to keep them clean. I should start poking around in the General area as well huh lol
Click to expand...
Click to collapse
If the action in the dev section is slow, then sure ;-P
Sent from my LG-P999 using XDA App
Any progress?
You might want to send rotohammer a PM. If I remember correctly, he was the first to successfully achieve volume boost with the Nexus One. Since he has a g2x might be something he'd be interested in taking a look at.
I know this is not helping now but for 2.3 there is help. On the market app called volume + sound booster. Works on all my 2.3 devices.
Link https://market.android.com/details?id=com.TEST.android.lvh
Instead of downloading apps try. *#*#4636#*#* in the dialer
*EDIT* nvm wrong menu.
jlevy73 said:
You might want to send rotohammer a PM. If I remember correctly, he was the first to successfully achieve volume boost with the Nexus One. Since he has a g2x might be something he'd be interested in taking a look at.
Click to expand...
Click to collapse
thanks i will
jlevy73 said:
You might want to send rotohammer a PM. If I remember correctly, he was the first to successfully achieve volume boost with the Nexus One. Since he has a g2x might be something he'd be interested in taking a look at.
Click to expand...
Click to collapse
dude I could not send him a PM. Can you please send it for me. Here is the message below.
Hey man I heard through Jlevy that you discovered how to boost the volume on the nexus 1. You have the G2X right. I have a thread opened for finding a way to mod the volume and get us a boost. I found a hidden menu that allows this. check my thread out dude. Thanks
http://forum.xda-developers.com/showthread.php?p=13457982&posted=1#post13457982
In looking at the logs the values are not sticking becuase lge is missing from the framework. Can someone please post a (ls) of their files in the framework that is on the STOCK rom. thanks
flak0 said:
While poking around in the hidden app menu on the stock firmware I found this audio Cal menu. Only thing its in hexedecimal and I don't know it too much. Basically this menu will allow us to safely boost the speaker volume on our phones. Screenshot below. If anyone can help please chime in. I remember on the N1 audio.boost was impossible until cm7.
Sent from my LG-P999 using XDA App
Click to expand...
Click to collapse
Nice. I found the menu. I haven't tried tweaking the settings, but by default, mine are:
178
178
75
75
0
0
(Respectively, per your screen shot)
If you build your own kernel (or use the one I just posted in the OC/UV kernel thread), you can munge the star_wm8994 driver to allow you to write these registers directly.
I have successfully boosted the crap out of the headphone output (0x1c/0x1d), although the framework will periodically reset them when a call comes in or when you fiddle with the volume controls.
If you just want LOUD headphone output though, works like a charm.
You want to enable the data sysfs entry in star_wm8994.c, then once you have that and can cat:
/sys/devices/platform/star_wm8994/data
to see a dump of the wm8994 state, you can write:
1c 7f
...and...
1d 17f
to the data file (just echo will do), and you will have maxed out headphone boost.
DebauchedSloth said:
If you build your own kernel (or use the one I just posted in the OC/UV kernel thread), you can munge the star_wm8994 driver to allow you to write these registers directly.
I have successfully boosted the crap out of the headphone output (0x1c/0x1d), although the framework will periodically reset them when a call comes in or when you fiddle with the volume controls.
If you just want LOUD headphone output though, works like a charm.
You want to enable the data sysfs entry in star_wm8994.c, then once you have that and can cat:
/sys/devices/platform/star_wm8994/data
to see a dump of the wm8994 state, you can write:
1c 7f
...and...
1d 17f
to the data file (just echo will do), and you will have maxed out headphone boost.
Click to expand...
Click to collapse
Is there anyway to keep these settkngs to stick? I've been looking for a natural headphone boost (not based on eq) more than anything
Sent from my LG-P999 using XDA App
PROBLEM:
Okay, I was tired as hell of not having GPS. I tried a ton of fixes on the internet, with absolutely no success. supl.google.com, supl.nokia.com, etc didn't work for me.
SOLUTION:
In the dialer type *#*#3214789650#*#* to access either lbstestmode or AngryGPS, depending on your ROM. Make sure Operation Mode in General Settings (AngryGPS) is on MSBASED, and go to the SUPL settings. Set the SUPL server to "h-slp.mnc410.mcc310.pub.3gppnetwork.org", port to 7275, and secure socket on. (Also I think one of the settings needs to be SUPL). Reboot and try again.
RESULT:
Before this I couldn't get a lock within 10 minutes and didn't have the patience to wait longer. Now I get locks in 15 seconds and within 10 meters.
Tell me whether it worked for you.
EDIT: added picture of 2 second lock.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This did not work at all for me.
Sent from my SAMSUNG-SGH-I997 using XDA App
Surprising. Worked perfectly for me, according to AngryGPS I get locks in 6 seconds now.
From XDA App on Infused v2.1.0 OCed to 1.6 GHz
jwl12345 said:
Surprising. Worked perfectly for me, according to AngryGPS I get locks in 6 seconds now.
From XDA App on Infused v2.1.0 OCed to 1.6 GHz
Click to expand...
Click to collapse
Give it some time, it will eventually flake out again. If it wasn't so screwed up there wouldn't so many different "fixes" out there.
Oh yeah, and it seems to work better on Infused 2+ than stock or Infused 1.6.
From XDA App on Infused v2.1.0 OCed to 1.6 GHz
did not work for me. When I turn off the use wireless network Google Maps tells me unable to detect your location.
jwl12345 said:
Oh yeah, and it seems to work better on Infused 2+ than stock or Infused 1.6.
From XDA App on Infused v2.1.0 OCed to 1.6 GHz
Click to expand...
Click to collapse
What does Infused term mean? Sorry I'm a newbie to android and I am rooted on Infuse 4G...is infused a rom? Serious question.
Thanks!
Faslane
faslane said:
What does Infused term mean? Sorry I'm a newbie to android and I am rooted on Infuse 4G...is infused a rom? Serious question.
Thanks!
Faslane
Click to expand...
Click to collapse
Read and use the sear h function before asking next time
Sent from my SGH-I997 using XDA App
WOW... woot woot!
I just pass the same hell than you searching for fix site by site. Finally this work....
12 sats in 5 secs and 4 working like in 9 secs... just awesome... I dunno where you find it but I feel I love you...many thanks!
Sent from my SAMSUNG-SGH-I997 using XDA Premium App
raaleck said:
WOW... woot woot!
I just pass the same hell than you searching for fix site by site. Finally this work....
12 sats in 5 secs and 4 working like in 9 secs... just awesome... I dunno where you find it but I feel I love you...many thanks!
Sent from my SAMSUNG-SGH-I997 using XDA Premium App
Click to expand...
Click to collapse
No problem bro. ;D
From XDA App on Infused v2.1.0 OCed to 1.6 GHz
jwl12345 said:
PROBLEM:
Okay, I was tired as hell of not having GPS. I tried a ton of fixes on the internet, with absolutely no success. supl.google.com, supl.nokia.com, etc didn't work for me.
SOLUTION:
In the dialer type *#*#3214789650#*#* to access either lbstestmode or AngryGPS, depending on your ROM. Make sure Operation Mode in General Settings (AngryGPS) is on MSBASED, and go to the SUPL settings. Set the SUPL server to "h-slp.mnc410.mcc310.pub.3gppnetwork.org", port to 7275, and secure socket on. (Also I think one of the settings needs to be SUPL). Reboot and try again.(...)
Click to expand...
Click to collapse
I used Google SUPL server: "supl.google.com" same port, secure socket ON.
and it did cut my locking time to 8 sec.
I did thank you. As I said, I'm new to this. Can anyine offer a non-snide comment in reply form please?
thank you!
Fas
Sent from my SAMSUNG-SGH-I997 using XDA App
jwl12345 said:
SOLUTION:
In the dialer type *#*#3214789650#*#* to access either lbstestmode or AngryGPS, depending on your ROM. Make sure Operation Mode in General Settings (AngryGPS) is on MSBASED, and go to the SUPL settings. Set the SUPL server to "h-slp.mnc410.mcc310.pub.3gppnetwork.org", port to 7275, and secure socket on. (Also I think one of the settings needs to be SUPL). Reboot and try again.
Click to expand...
Click to collapse
I was kinda struggling earlier, but dunno how these settings made it possible, but I am not getting a lock in under 5-6 seconds in nearly all tests - geo location, maps, tracking, etc. First lock took about 17 seconds, but since then its been under 5-6 seconds.
here's my experience with this overall:
* 2 important things are a) getting a lock in less time b) tracking with accuracy
* some fixes get locks in short time whereas some are more accurate while driving, I'm yet to find a good combination on both.
Also, starting the GPS in "cold start" mode also reduces lock time with original settings, leading me to believe that some kind of cache corruption is at play. With supl.nokia.com, it gets lock under 5 seconds, but Google Navigation is all over the place - frustrating. Shame on Samsung!
jdbeitz said:
Read and use the sear h function before asking next time
Sent from my SGH-I997 using XDA App
Click to expand...
Click to collapse
Lol wow it took more work to type a smart*** response then to just say "yep it's a rom"
Sent from my SAMSUNG-SGH-I997 using XDA App
timeToy said:
I used Google SUPL server: "supl.google.com" same port, secure socket ON.
and it did cut my locking time to 8 sec.
Click to expand...
Click to collapse
As I stated in my original post, the Google SUPL server didn't work for me. Infuses are apparently not all the same. I hope people try this along with my fix.
From XDA App on Infused v2.1.0 OCed to 1.6 GHz
diablo009 said:
I was kinda struggling earlier, but dunno how these settings made it possible, but I am not getting a lock in under 5-6 seconds in nearly all tests - geo location, maps, tracking, etc. First lock took about 17 seconds, but since then its been under 5-6 seconds.
Click to expand...
Click to collapse
These settings work because a lot of Infuses are strangely incompatible with the default SUPL server Samsung ships it with.
From XDA App on Infused v2.1.0 OCed to 1.6 GHz
Worked for me. Thanks.
Cranky...
Truckerglenn said:
Worked for me. Thanks.
Cranky...
Click to expand...
Click to collapse
Great to hear it worked.
From XDA App on Infused v2.1.0 OCed to 1.6 GHz
Bump because it worked.
From XDA App on Infused v2.1.0 OCed to 1.6 GHz
Using the Wake on Lan service implemented on almost all motherboards, you can use this app so that when your mobile connects to your home/work WiFi network it boots up your PC automatically!
Small guide for setup
Play Store Link
QR Code
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Play Store Description
I'm Home is a new Android Application which automatically starts up your computer when you arrive at home or work, and runs quietly and efficiently in the background of your Android device.
If you are someone who likes their PC to be on constantly so that you don't have to spend time waiting for you PC to turn on. Then this app is a smart alternative which will help you save on energy bills and do a little extra for the environment!
Alternately if you are someone who shuts their computer down when you leave your home/work and turn it back on when you return, then this app will help reduce the time in your day spent staring at loading screens, and you don't even need to take your phone out!
Screenshots
will try soon... sounds interesting...
Very eager to try this, thanks. This could be one of those "Didn't know I needed it" type things.
very creative idea, installed the app and its working perfectly.
One request, it would be great if we could also set a time window. If I come home at 3AM I don't need my PC to turn on :laugh:
Will be putting this on for the media center, 3TB drives take a while to initialize everything. lol. Pointless on SSD's though
This sounds really interesting, will try this later
Sent from my Nexus 4 using Tapatalk 4
Great idea.
Sent from my cm_tenderloin using xda app-developers app
kantjer said:
very creative idea, installed the app and its working perfectly.
One request, it would be great if we could also set a time window. If I come home at 3AM I don't need my PC to turn on :laugh:
Click to expand...
Click to collapse
Thanks for the idea! I will probably include this in the next update
I cant for the life of me get this to work.. followed all instructions still wont wake
v1.0.1
v1.0.1 - Added ability to disable the app in a certain time frame (recommended by @kantjer). Button to auto fill the SSID with the current WiFi networks SSID instead of having to type it out manually
youngyoshi said:
I cant for the life of me get this to work.. followed all instructions still wont wake
Click to expand...
Click to collapse
Sorry to hear that. Does your motherboard support Wake On Lan?
philleonard said:
Sorry to hear that. Does your motherboard support Wake On Lan?
Click to expand...
Click to collapse
yea set the settings on my mobo and set everything up just wont kick my pc on
youngyoshi said:
yea set the settings on my mobo and set everything up just wont kick my pc on
Click to expand...
Click to collapse
If you are using the broadcast address to send the message (i.e. 255.255.255.255) you may need to enable it in the router settings.
I would;
1)Download Wireshark.
2)Record your ethernet adapter
3)Send the packets on the app using the send test button
4)Then try and see them appear on the live recording, or pause the recording and then sort it by protocol and look for the protocol "WOL" it should be in blue.
If you don't find anything then most likely your router isn't forwarding the packets. If you do then it will probably be something to do with the WOL setup on your PC.
Also WOL only works on ethernet, and only wakes your PC up providing the last windows shutdown was clean (i.e. you don't turn it off using the power switch or it didn't crash during shutdown). Even if the PC is "off", then you turn the PSU off and on again it still wont work. I think this is because it resets your ethernet adapter and it looses it's entry in the routers ARP table (but It could be another reason).
Hope this helps!
Works for me when I send a test packet from the app. Will test again tonight when I come home from work, and see if my PC is on
Sent from my GT-I9505 using XDA Premium 4 mobile app
What's supposed to happen when you click the send packets button?
Rehab4Life said:
What's supposed to happen when you click the send packets button?
Click to expand...
Click to collapse
Put your computer to sleep, then press test send packet and your computer should turn on.
Forgot to put my computer to sleep before leaving for work as I was in a rush. So didn't get to test
Sent from my GT-I9505 using XDA Premium 4 mobile app
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
LNET OPTIMIZER
Everything is moved
Here!
LNET OPTIMIZER will increase your net speeds to the maximum.
Requirements
Root Access (use SuperSU for mod properly working
init.d support (Users without init.d just flash the mod, but SuperSU is needed)
How to install:
Download the file LNET_OPTIMIZER.txt/pdf script and save to your sdcard.
Remove .pdf from the name
Run the script:
A) Load the script (LNET_OPTIMIZER.txt/pdf) into Script Manager and select "Run as Root" (skull and crossbones "Su" icon - it turns green when selected)
-=OR=-
B) Run Terminal Emulator and simply type: su and enter, sh /sdcard/NAME_OF_THE_FILE.sh and enter (provided you saved the script to the root of your sdcard)
Follow the screen i structions and soon you will be in the configuration menu.
CHANGELOG:
v1.0
Initial release
v2.0
Ril tweak updated, removed some lines
Fixed typo
Protection updated
ANDROID FILE HOST
PAYPAL users can donate me using this link
http://paypal.me/Paget96
If you have issues, download paypal app from playstore, that will work
For US users:
"I could not use your paypal donation link or url as you already know as it's not possible to send a donation from USA. I logged into my paypal account and used the option to pay for goods or services to send you the funds."
Thanks a lot, guys
First
Thanks man ...
Should i enable all option or any recommendations?
Cc @Paget96
second
Can i use this with arkaynine boost script(project darkbooster?
Reporting that my WiFi connection no longer works with this mod active. I tested it by turning off my Vzw data on my handset and attempting to use WiFi only. No connection errors are happening. WiFi is broken for me. Setup: LG g3 vs985, CM 12.1, 777 Kernel, Netgear dual mode WiFi router. Will do further testing and report back. Gary
Edit: I ran checks on my handset turning off this mods options one at a time then re-enableing them. It appears that the problem is when you go from Bluetooth to Data to WiFi. The handoffs messes the WiFi or Data connection: what ever you switch to. This happens when switching between data and WiFi also. The WiFi status icon has a exclamation indicator in the status bar to alert to a WiFi connection problem. The LTE indicator disappears in the data statusbar icon when the problem is with Data connection. I do have a Bluetooth GPS device in my car but have not checked it for the connectivity issue with my phone yet.
Sorry for the length of this. I hope those of you may be able to duplicate my findings and arrive at a solution. BTW, at present the mod is fully enabled and I have no Wifi connection. I have data though. If I turn off WiFi in settings and reenable it, the WiFi comes back but data has issues.
Gary Edited 10/23 @9:49 am
Hi.how to run this script?
Stay this step.
Sent from my SM-N9005 using Tapatalk
How uninstall it?
Sent from my C6603 using Tapatalk
mirsaeed.namdar said:
How uninstall it?
Sent from my C6603 using Tapatalk
Click to expand...
Click to collapse
Are you with me?
I downloaded this script but cant run.how to run and instal this script?
Sent from my SM-N9005 using Tapatalk
roozbeh158 said:
Are you with me?
I downloaded this script but cant run.how to run and instal this script?
Sent from my SM-N9005 using Tapatalk
Click to expand...
Click to collapse
man you have to read the instructions.. It's pretty clear the exact steps..
Make a backup tho please because.... Just make a backup..
sent from an smn900t
Haa........ new things to try ...... Thanks Man !
No problems here. Everything works fine on Oneplus one.
When did you move it to a separate thread. I was looking in the L Speed Mod thread.
Sent from a Cool Phone stuck with crappy KingUser
Deleated
---------- Post added at 03:32 AM ---------- Previous post was at 03:28 AM ----------
A separate thread was set up Friday afternoon. Just replying because I had a 3am feeding to do for a kitten. Gary
v2 is uploaded.
Here is a changelog
v2.0
Ril tweak updated, removed some lines
Fixed typo
Protection update
I hope that problems with no connection are gone.
Sent from my Nexus 5 using Tapatalk
Installed 2.0 and tested with small and big buffer, dns enabled, rilj enabled, protection set to off. See pic for result (buttom to top)
First run 1 time normal without lnet, second and third small buffer, 4 5 and 6 with big buffer. So there is improvement. Test was done in the smae location and signall at full.
@fema0870 awesome Is there a battery drain???
Sent from my Nexus 5 using Tapatalk
For some reason I enabled pretty much everything on my note 4 and it made the phone have like a half screen fuzz (almost like if I dropped my device and cracked the screen), it also made my hardware menu and back button completely blacked out and unusable, the touch screen had to be hit on an angle even when I dirty flashed my rom and even when I cleaned flashed it! Worst part is is it did this even when in twrp recovery I'm going to Odin factory reset my device when I get home but anybody else have this issue made, it may not be the mod
@dinaps86 for sure that this is not caused by the mod.
That is a hardware problem. :/
Sent from my Nexus 5 using Tapatalk
Paget96 said:
@fema0870 awesome Is there a battery drain???
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
With LS 3.3 beta 7 and lnet 2.0 now and no baterry drain brother :d