Related
Hi,
I tried to update stock JB and I had ICS v2 rooted Micromax A110.
Half way through it threw an error by saying Invalid FORMAT syntax or something of that sort after successfully copying files.
Now my phone
doesnt start
cannot go into recovery
There are no light blinking
Computer doesnt identify when connected
IT IS TRULY BRICKED..!!
Is there any alternative apart from taking it to service center?
Cheers
Fugitive
fugitive_4u said:
Hi,
I tried to update stock JB and I had ICS v2 rooted Micromax A110.
Half way through it threw an error by saying Invalid FORMAT syntax or something of that sort after successfully copying files.
Now my phone
doesnt start
cannot go into recovery
There are no light blinking
Computer doesnt identify when connected
IT IS TRULY BRICKED..!!
Is there any alternative apart from taking it to service center?
Cheers
Fugitive
Click to expand...
Click to collapse
May i know which procedure you tried for updation through SP flash tool or through cwm....
BOND1987 said:
May i know which procedure you tried for updation through SP flash tool or through cwm....
Click to expand...
Click to collapse
Thanks for replying..
Used SP Tool v3.1224.
Cheers
Fugitive
Try to flash V2 rom via SP tool again if it doesnt work you have to take it to the Service center and btw which os do you use for pc?
stealthroot said:
Try to flash V2 rom via SP tool again if it doesnt work you have to take it to the Service center and btw which os do you use for pc?
Click to expand...
Click to collapse
When switched off and connected to a power source, I dont even see the battery symbol. SP Tool doesnt recognise the phone from two machines I tried (one win 7 32-bit and another win7 64-bit).
Let me know if there are any other options I can try
Cheers
Fugitive
fugitive_4u said:
When switched off and connected to a power source, I dont even see the battery symbol. SP Tool doesnt recognise the phone from two machines I tried (one win 7 32-bit and another win7 64-bit).
Let me know if there are any other options I can try
Cheers
Fugitive
Click to expand...
Click to collapse
Uninstall the drivers of micromax /cyanus t2 if you have installed it check it via the device manager and install the drivers again try to flash it !
Thanks..!
Guys,
Many thanks for all the help and input.
I had to take it to Service Center in Bangalore. It was totally bricked and I explained them whatever I did honestly
They said my warranty would be void and they were still not aware if MMX had released a JB version and asked me to come 3 days later. Today I went in and lo behold my A110 was updated to JB and also warranty was not void. Nice people at support I say.
Now, me being me, within hours of getting my phone, I updated to CWM Recovery and rooted the phone
Cheers folks
Fugitive
my a110 is not responding to sp flash tool
even i have installled the drivers and have appropriate stock rom file .
when this error occured i tried to reset my cell bt problem still resists
pleaseeeee help !!!!!!!!!!!!!!!!!
abhishek120 said:
my a110 is not responding to sp flash tool
even i have installled the drivers and have appropriate stock rom file .
when this error occured i tried to reset my cell bt problem still resists
pleaseeeee help !!!!!!!!!!!!!!!!!
Click to expand...
Click to collapse
Try META MODE......!
flash mobile by removing battery
1.remove battery and hold volume + button
2.then connect to pc then flash it through sp tool
abhishek120 said:
my a110 is not responding to sp flash tool
even i have installled the drivers and have appropriate stock rom file .
when this error occured i tried to reset my cell bt problem still resists
pleaseeeee help !!!!!!!!!!!!!!!!!
Click to expand...
Click to collapse
Are u using Windows 8.. Cuz I had prblms flashing via sp tools in Windows 8.. windows 7 did it fr me..
Sent from my Micromax A110 (Canvas 2) using xda premium
demongokul said:
Are u using Windows 8.. Cuz I had prblms flashing via sp tools in Windows 8.. windows 7 did it fr me..
Sent from my Micromax A110 (Canvas 2) using xda premium
Click to expand...
Click to collapse
No i m using Windows 7
bro this happens sometime
i prefer u to use windows XP because sometimes due to win 7 automatic updates drivers issues takes place
and nothing to worry. u r phone is absolutely fine ,,, prob is with system
just change the system and try
if problem still persists try with latest SP Flash tools and old one ......(once this solved my prob too)
make sure u have installed "Mobistel Cynus T1 or micromax Drivers",, "MTK Drivers" ,,"VCOM Driver"
if u hav trouble installing drivers ,do this
when windows xp shows new hardware found click on it and go for manually updating drivers and set the path to the folder downloaded drivers are present in .it will automatically take care of the rest
and check this link it has everything
http://forum.xda-developers.com/showthread.php?t=2167244
and happy flasing
revanth22 said:
bro this happens sometime
i prefer u to use windows XP because sometimes due to win 7 automatic updates drivers issues takes place
and nothing to worry. u r phone is absolutely fine ,,, prob is with system
just change the system and try
if problem still persists try with latest SP Flash tools and old one ......(once this solved my prob too)
make sure u have installed "Mobistel Cynus T1 or micromax Drivers",, "MTK Drivers" ,,"VCOM Driver"
if u hav trouble installing drivers ,do this
when windows xp shows new hardware found click on it and go for manually updating drivers and set the path to the folder downloaded drivers are present in .it will automatically take care of the rest
and check this link it has everything
http://forum.xda-developers.com/showthread.php?t=2167244
and happy flasing
Click to expand...
Click to collapse
actually when i connected my phone to pc i noticed it is installing mt65xx preloder instead of mtk
now what to do???
abhishek120 said:
actually when i connected my phone to pc i noticed it is installing mt65xx preloder instead of mtk
now what to do???
Click to expand...
Click to collapse
dont worry its a simple problem
check this post it will help u
http://forum.xda-developers.com/showthread.php?t=2180436
Buddy no problem with Windows 8.
It works fine i am using it. Just follow this procedure to install proper drivers.
Link: http://forum.xda-developers.com/showthread.php?t=2370906
Solution
abhishek120 said:
actually when i connected my phone to pc i noticed it is installing mt65xx preloder instead of mtk
now what to do???
Click to expand...
Click to collapse
Bro, follow all the steps of using SP Flash tool which I hope u are following. Now the same error was faced by me, U can just press the volume up key and connect the USB to your PC. Please note U have to hold the volume up key while connecting the USB. and leave immediately ( within 5 secs ) after the USB is inserted.
This has worked for me and 3 other friend's of mine. Best of luck.
Hit thanks If it helps u.
hei guys i tried all the ways but for some reason my pc wont able to detect my phone using sp flash tool..keep on searching..what is wrong or is my phone dead?
ynj said:
hei guys i tried all the ways but for some reason my pc wont able to detect my phone using sp flash tool..keep on searching..what is wrong or is my phone dead?
Click to expand...
Click to collapse
Have you installed the drivers?
GreatApo said:
Have you installed the drivers?
Click to expand...
Click to collapse
yes.using mtk device all along..
ynj said:
yes.using mtk device all along..
Click to expand...
Click to collapse
Try unistalling and installing again...
GreatApo said:
Try unistalling and installing again...
Click to expand...
Click to collapse
already tried.it the same..jus realised my phone usb port broken together with jumping wire.thanks for ur help
due of unstable rom my phone is dead.. i want to flash it with the stock rom using sp flash tool but in devicce manager my phone is not deteccted by my laptop...if once the drivers are detected everything is solved, please tell me how to make my computer detect my phone
Just install Telegram
And visit
https://t.me/LeecoUnofficial
thank you..but it is not working
asif2017 said:
Install mtk drivers on ur pc ..it will detect
Or whatsapp me +919906673436
Sent from my Letv X500 using Tapatalk
Click to expand...
Click to collapse
the device is not at all detected by the laptop
Try vcom driver mobistel
sam7799 said:
due of unstable rom my phone is dead.. i want to flash it with the stock rom using sp flash tool but in devicce manager my phone is not deteccted by my laptop...if once the drivers are detected everything is solved, please tell me how to make my computer detect my phone
Click to expand...
Click to collapse
Im also faced the same situation few months back,
Do these steps..
1.install adb drivers in pc,
2.in ur phone open twrp and select adb side load ..
3.run sp flashtools as administrator,press cntrl+atl+t and select device test..... now connect phn to pc..
4..if still ur pc didn't't recognise ur device...
5.then Chenge the com port (connect ur phone at back usb port of ur pc..)...
Best of luck dude..
Hey .plz help me my phone letv le 1s is stuck on starting logo due wrong rom flashing my. Phone is bricked stuck on starting logo .plz anybady know solution plz tell me
My contact 7028953438
[email protected]
Shrikantc615 said:
Hey .plz help me my phone letv le 1s is stuck on starting logo due wrong rom flashing my. Phone is bricked stuck on starting logo .plz anybady know solution plz tell me
My contact 7028953438
[email protected]
Click to expand...
Click to collapse
Do you have a backup of your rom you were using before?
If not then try to flash rom using SP flash tool ...for further information you can search on YouTube...?
[email protected]@ said:
Im also faced the same situation few months back,
Do these steps..
1.install adb drivers in pc,
2.in ur phone open twrp and select adb side load ..
3.run sp flashtools as administrator,press cntrl+atl+t and select device test..... now connect phn to pc..
4..if still ur pc didn't't recognise ur device...
5.then Chenge the com port (connect ur phone at back usb port of ur pc..)...
Best of luck dude..
Click to expand...
Click to collapse
Dude ! how am i supposed to go to twrp while phone is completely bricked.
It doesn't turn or just show red light and the pc is not detecting it.
Is there any solution i can get it recognized by the PC.
mmrtov said:
Dude ! how am i supposed to go to twrp while phone is completely bricked.
It doesn't turn or just show red light and the pc is not detecting it.
Is there any solution i can get it recognized by the PC.
Click to expand...
Click to collapse
Flash stock rom using sptool if it is bricked
santoshhh000 said:
Flash stock rom using sptool if it is bricked
Click to expand...
Click to collapse
I try flashing the x509 using the stock firmware but it's still not recognised by the computer.
What should I do to get my phone recognised by the computer my phone is letv 1s le x509.
mmrtov said:
I try flashing the x509 using the stock firmware but it's still not recognised by the computer.
What should I do to get my phone recognised by the computer my phone is letv 1s le x509.
Click to expand...
Click to collapse
Use mtkdrivers drivers
Please guide me about the driver like whis
Ch mtk driver i should install i m using windows 10 pro anniversary update 64 bit if possible please give me the download link.
Thank you
mmrtov said:
I try flashing the x509 using the stock firmware but it's still not recognised by the computer.
What should I do to get my phone recognised by the computer my phone is letv 1s le x509.
Click to expand...
Click to collapse
Have u tried installing vcom drivers ...? Before installing the rom.....
---------- Post added at 09:07 PM ---------- Previous post was at 08:56 PM ----------
mmrtov said:
Please guide me about the driver like whis
Ch mtk driver i should install i m using windows 10 pro anniversary update 64 bit if possible please give me the download link.
Thank you
Click to expand...
Click to collapse
https://tehnotone.com/windows-10-mtk-vcom-usb-drivers-for-32-64-bit-drivers-installation-tutorial/ here is the step by step process to install drivers. According to your pc version.
Try this method
youtu.be/-KSExDz_78E
Daniyal_sheikh said:
youtu.be/-KSExDz_78E
Click to expand...
Click to collapse
Can you explain ,....,,.,.,......,?
Le 1s suddenly off not detecting sp tool and charging show red light
4 month before when i use leeco le 1s mobile suddenly off and i press power button mobile not on.. Mobile is ****ch off i try to on mobile but doesn't on, when i connect phone charger notifications light is red and not show screen charging or any other change and i also try sp flash tool but not working mujhe lga hardware problem hoga so .. After some day when mobile give local show then his charge me 1800 and mobile is on and fine.. After few hours same problem mobile off red light while charging not detect laptop.. When again i give mobile local show he suggested for mother board change and price is 3000 and i not charging my mobile motherboard sir please help.. Hardware problem or software same ideas any one
---------- Post added at 11:58 AM ---------- Previous post was at 11:55 AM ----------
Please contact me bro and help me.. 7987597172
Ok. I was trying to install the global rom for my redmi 9AT with twrp and when i clicked on restart, the device never turned on. I check a video of a guy telling who to unbrick mediatek devices and it was all correct, but when i click on download mode on flash tool, it failed and automatclyy disconected. So i conected it again and it show me an windows error message telling me that:
The usb device is not recognized.
The last usb device you connected to this computer didn't work properly, and windows didn't recognize it.
Here you have the tutorial i seen on youtube.:
Please help me.
Thanks.
Sorry if some words arent write propely, im spanish.
What Windows OS version are you on?
nobodyAtall said:
What Windows OS version are you on?
Click to expand...
Click to collapse
i have windows 11, but i tried it on windows 8.1, 10 and 7 and it didnt work
alfx_09 said:
i have windows 11, but i tried it on windows 8.1, 10 and 7 and it didnt work
Click to expand...
Click to collapse
Did you try disable Driver Signature Enforcement feature?
nobodyAtall said:
Did you try disable Driver Signature Enforcement feature?
Click to expand...
Click to collapse
i dont know whats that. but anyways i think the error is because when you try to unlock the bootram or something like that your device is like locked, so i waited 2 days and i flashed the rom perfectly and now is working oerfectly. thank you for trying helping me
Change USB Cable with black cable inside, no guarante official cable support for transfer data, if i see your screenshot its just support charging, bypass your in brom mode with MTK bypass and the flash with SP Flash Tool..
Nanang_Hamada said:
Change USB Cable with black cable inside, no guarante official cable support for transfer data, if i see your screenshot its just support charging, bypass your in brom mode with MTK bypass and the flash with SP Flash Tool..
Click to expand...
Click to collapse
She solved the problem.
Nanang_Hamada said:
Change USB Cable with black cable inside, no guarante official cable support for transfer data, if i see your screenshot its just support charging, bypass your in brom mode with MTK bypass and the flash with SP Flash Tool..
Click to expand...
Click to collapse
it was not the cable. when i bypassed it and flashed the incorrect rom, i disconected and conect it again and it show me that message. i soved the problem by using mediatek sp flash tool kurdish firmware and using the v12.0.15.0 european rom
alfx_09 said:
it was not the cable. when i bypassed it and flashed the incorrect rom, i disconected and conect it again and it show me that message. i soved the problem by using mediatek sp flash tool kurdish firmware and using the v12.0.15.0 european rom
Click to expand...
Click to collapse
Ok