I tried many methods mentioned in Road map to install ICS rom. But no success.
Currently : I am at GB 2.3.6 UCLB3 with root and CWM V2.5.1.3
other specs :
Firmware : 2.3.6
Baseband : I997UCLB3
Kernel : 2.6.35.7-I997RUXKG3-CL366622
Buid : Gingerbread.UCLB3
While on Download Mode I get these messages :
custom binary Download : Yes (1 count)
Current Binary : CUSTOM
Please help with next steps to install ICS ROM like AOKP or MIUI. ??
Also suggest for which ICS to go ?
Can u plz provide more details as how u tried to install the ICS and what error u faced ?
rkkaranrk said:
Can u plz provide more details as how u tried to install the ICS and what error u faced ?
Click to expand...
Click to collapse
After this I downloaded AOKP ROM and through CWM I flashed. No error Message but got stuck up at SAMSUNG load screen. Tried second time also. No chance.
harismahesh said:
After this I downloaded AOKP ROM and through CWM I flashed. No error Message but got stuck up at SAMSUNG load screen. Tried second time also. No chance.
Click to expand...
Click to collapse
Hanging on the Samsung screen is normal when coming to AOKP from Gingerbread, you need to double flash here's how:
Flash the ROM like normal in CWM, when it reboots and you hang at the Samsung screen use the 3 finger method to get into Recovery (hold power & both Volume buttons). Once there go the Mounts and Storage option and format system, data, and cache...then reflash the ROM again (you may also have to flash the latest gapps if your not using an Aroma installer) reboot and you should be gtg.
it doesn't hang for me
harismahesh said:
After this I downloaded AOKP ROM and through CWM I flashed. No error Message but got stuck up at SAMSUNG load screen. Tried second time also. No chance.
Click to expand...
Click to collapse
brother did you read the op....but just like Smokestack360 posted....try to read his directions....attention to detail...and you will be GTG!
I don't mean to be an [email protected]@ and I apologize if I do...but this is your investment, your phone....I personally read and re-read...and sometimes get my wife to read it...btw she hates that...LOL,
How to Install - Coming from NON ICS Rom
Download Rom and latest Google Apps and enter recovery
Wipe/Factory Reset
Flash rom zip file
Reboot...will hang on kernel splash screen
Use three-button method to enter recovery mode
Go to mounts and storage and format system, data, and cache
Reflash rom
Flash Gapps
Reboot
Please Guide me to Install MIUI ROM .
Currently I am on :
Currently : I am at GB 2.3.6 UCLB3 with root and stock 3E
other specs :
Firmware : 2.3.6
Baseband : I997UCLB3
Kernel : 2.6.35.7-I997RUXKG3-CL366622
Buid : Gingerbread.UCLB3
I tried with Entropy DD Kernel and it soft bricked my phone. So I reverted back. Then only I saw it wont work for MIUI. Right now i am on stock 3E ( not modified) with root.
Please guide me to put MIUI ROM. I didnt find any help in MIUI ROM thread.
harismahesh said:
I tried with Entropy DD Kernel and it soft bricked my phone. So I reverted back. Then only I saw it wont work for MIUI. Right now i am on stock 3E ( not modified) with root.
Please guide me to put MIUI ROM. I didnt find any help in MIUI ROM thread.
Click to expand...
Click to collapse
Use Odin or Heimdall to get cwm recovery then follow the steps in the above posts. I think u might even b able to get cwm recovery via the ROM manager app but think that it isn't the recommended method.
When coming from GB, u have to flash twice. That's why u were stuck at the Samsung logo before.
All ics ROMs are flashed the same way so read through the first posts of dev threads. Although the instructions will b the same as provided above.
Edit: And don't try to use a different kernel right off the bat. The one provided with the ROM is usually provided bc it works best.
Sent from my SGH-I997 using xda app-developers app
benbos_06 said:
Use Odin or Heimdall to get cwm recovery then follow the steps in the above posts. I think u might even b able to get cwm recovery via the ROM manager app but think that it isn't the recommended method.
When coming from GB, u have to flash twice. That's why u were stuck at the Samsung logo before.
All ics ROMs are flashed the same way so read through the first posts of dev threads. Although the instructions will b the same as provided above.
Edit: And don't try to use a different kernel right off the bat. The one provided with the ROM is usually provided bc it works best.
Sent from my SGH-I997 using xda app-developers app
Click to expand...
Click to collapse
For Recovery I can use Entropy Daily Driver, But that wont work for MIUI. SO where I can a Kernel which contains CWM for MIUI.
harismahesh said:
For Recovery I can use Entropy Daily Driver, But that wont work for MIUI. SO where I can a Kernel which contains CWM for MIUI.
Click to expand...
Click to collapse
If u look in the "ISET Infuse everything" thread that's stickied in the dev section, there is Odin or Heimdall one click which both will give u cwm recovery.
I'm not familiar with entrophy's daily driver but I thought it was just a GB kernel, which is why it wouldn't work with that miui version bc it is ics.
Edit: I know most (and I believe all) ROMs will have a kernel packaged with them so u can just flash the ROM to get a working kernel. But bc it coming from GB, u need to follow the instructions provided above and flash twice. The reason I am saying use Odin is bc u said u have 3e recovery and I believe that u need to get cwm recovery first. I may b wrong about that tho.
Sent from my SGH-I997 using xda app-developers app
benbos_06 said:
Use Odin or Heimdall to get cwm recovery then follow the steps in the above posts. I think u might even b able to get cwm recovery via the ROM manager app but think that it isn't the recommended method.
When coming from GB, u have to flash twice. That's why u were stuck at the Samsung logo before.
All ics ROMs are flashed the same way so read through the first posts of dev threads. Although the instructions will b the same as provided above.
Edit: And don't try to use a different kernel right off the bat. The one provided with the ROM is usually provided bc it works best.
Sent from my SGH-I997 using xda app-developers app
Click to expand...
Click to collapse
You've got that wrong
I flashed cm9 on red cwm and it worked without the freeze screem
This kindle is on pure jelly bean
harismahesh said:
Please Guide me to Install MIUI ROM .
Currently I am on :
Currently : I am at GB 2.3.6 UCLB3 with root and stock 3E
other specs :
Firmware : 2.3.6
Baseband : I997UCLB3
Kernel : 2.6.35.7-I997RUXKG3-CL366622
Buid : Gingerbread.UCLB3
I tried with Entropy DD Kernel and it soft bricked my phone. So I reverted back. Then only I saw it wont work for MIUI. Right now i am on stock 3E ( not modified) with root.
Please guide me to put MIUI ROM. I didnt find any help in MIUI ROM thread.
Click to expand...
Click to collapse
Read post #4 and #6. That tells you how to flash a cm9 rom. I suggest, based only on my experience, flashing Entropy512's cm 9 build. Again, follow the instructions in post 4 and / or 6. I would not flash the current version of miui 4 as a new build will soon be posted. The instructions for flashing miui are in the OP.
GoSooners345 said:
You've got that wrong
I flashed cm9 on red cwm and it worked without the freeze screem
This kindle is on pure jelly bean
Click to expand...
Click to collapse
Sorry, to b politically correct, I should have said the majority of ppl have to flash twice.
Sent from my SGH-I997 using xda app-developers app
Yeah u have to flash it twice to get it work or else u will stuck in blue recovery.
Sent from my GT-I9300 using Tapatalk 2
ok so long story short i tried to flash my samsung infuse 4g with a rom from this website (ROM][Jellybean] CNA 3.5.0 for Samsung Infuse [PORT] ) i used to have froyo 2.2. all was well and then my phone just stopped working and wouldnt pass boot screen. but i saved my old rom's data with clockworkmod on my sd card. the thing is there are like 5 .tar files and i want to know if i can recover my old rom using odin since i cant even get passed the boot screen??? pls someone help me i'm freaking out, ive been googleing all night and i'm totally burnt out. the files i have are .android_secure.vfat.tar, cache.rfs.tar, data.rfs.tar, efs.rfs.tar, nandroid.md5 and system.rfs.tar...... pls someone show me how to fix my phone
thanks in advance
Don't think you can flash those files, but you should be able to go back to stock.
Sent from my sweet & buttery Infuse
Follow these instructions. I would use the zip that takes you back to stock with root.
Keep one thing in mind.....you CANNOT go from Froyo to JB.
http://forum.xda-developers.com/showthread.php?p=27286083#post27286083
I keep this thread bookmarked. I have soft bricked my phone so many times, it's not funny!!!
http://forum.xda-developers.com/showthread.php?t=1700416
Lack of reading/research caused your error :/
Anyways go back to stock with heimdall.or Odin, get red cwm again and you should be able to restore your backups
If you want to go to jb in the future....then you must first follow go to ics, then jb...you have to have ics before you can flash gb
Sent from my HTC PH39100 using Tapatalk 2
thanks again to all the comments, yes this was a big Noob mistake, i guess i was just way to excited to jump on the JB wagon. i have since returned to stock froyo using one of the kernals from this site (Stock_Root-Mod3e-UCKD5_Odin), so this is what i have now... although a little phased i still want to give this a second attemp. the rom i wanted to flash was [ROM][JellyBean] CNA 3.5.0 / Nightly 9/20 for Samsung Infuse [PORT]....
just to get things straight so i don't mess up again, i have to flash froyo with ics (is there a specific ics version i should get? on a how to guide on flashing jb i found this info: Entropy512's CM9 Kernel / Blue CWM Recovery 2012.05.02-ODIN-Entropy-CM9-zImage.rar) can i use this one, i prefer odin b/c i've never used heimdall. then after i flash ics then i can flash to jb.... but reading some threads i saw that....
"Currently on stock Froyo:
1) Use Heimdall or Odin to flash stock UCLB3 (GB)
*Reccomendation: Also flash GB bootloaders. See first post for links and warnings.*
2) Flash Entropy's DD kernel to obtain root and red CWM recovery.
Currently on stock GB:
1) Flash Entropy's DD kernel to obtain root and red CWM recovery."
do i have to do this step or can i go forward with the current Stock_Root-Mod3e-UCKD5_Odin that i now have installed....?
secondly, after i install ics, right before i flash jb it states i have to do an aroma prep....then flash jb.....
all flashes are done with clockworkmod and i wipe only cache and dalvik? or is there anything else i have to wipe?
sorry for all the questions, i have read and researched many threads but they are all pretty overwhelmingly full of lots of info.....just wanna get it in order....
thanks again
from froyo to ics i use odin, from odin to jb i use cwm, correct?
marielacvn said:
thanks again to all the comments, yes this was a big Noob mistake, i guess i was just way to excited to jump on the JB wagon. i have since returned to stock froyo using one of the kernals from this site (Stock_Root-Mod3e-UCKD5_Odin), so this is what i have now... although a little phased i still want to give this a second attemp. the rom i wanted to flash was [ROM][JellyBean] CNA 3.5.0 / Nightly 9/20 for Samsung Infuse [PORT]....
just to get things straight so i don't mess up again, i have to flash froyo with ics (is there a specific ics version i should get? on a how to guide on flashing jb i found this info: Entropy512's CM9 Kernel / Blue CWM Recovery 2012.05.02-ODIN-Entropy-CM9-zImage.rar) can i use this one, i prefer odin b/c i've never used heimdall. then after i flash ics then i can flash to jb.... but reading some threads i saw that....
"Currently on stock Froyo:
1) Use Heimdall or Odin to flash stock UCLB3 (GB)
*Reccomendation: Also flash GB bootloaders. See first post for links and warnings.*
2) Flash Entropy's DD kernel to obtain root and red CWM recovery.
Currently on stock GB:
1) Flash Entropy's DD kernel to obtain root and red CWM recovery."
do i have to do this step or can i go forward with the current Stock_Root-Mod3e-UCKD5_Odin that i now have installed....?
secondly, after i install ics, right before i flash jb it states i have to do an aroma prep....then flash jb.....
all flashes are done with clockworkmod and i wipe only cache and dalvik? or is there anything else i have to wipe?
sorry for all the questions, i have read and researched many threads but they are all pretty overwhelmingly full of lots of info.....just wanna get it in order....
thanks again
from froyo to ics i use odin, from odin to jb i use cwm, correct?
Click to expand...
Click to collapse
Follow all steps, don't skip a thing. As for wiping, wipe Cache, Data, Dalvik, and format /System when going from GB to ICS and ICS to JB. That UCLB3 file is Gingerbread stock and you have to go to gingerbread before you go to ICS.
Also, if you are confident that your phone won't get disconnected from Odin while flashing the UCLB3 file, flash the GB bootloaders while you're at it. If the flash fails while flashing bootloaders then your device is bricked so be sure about Odin before you flash them.
Sent from my SGH-I997 using xda app-developers app
Since you have already used Odin, I would use option "C". The best thing you can do is read everything two or three times. There are also many vids on YouTube that are helpful.
Once you are on GB.....just pick out any ICS ROM an flash it. Once it installs, I wouldn't even bother sitting it up and then you can go to JB.
Th3Bill uses an Aroma installer in his ROMs and the first time you use it, you will have to flash his aroma-prep first.
Hang in there....go slowly...and read. This gets easier and easier the more you do it. I always just d/l the zips to my phone and never even have to mess with the PC.
http://forum.xda-developers.com/showthread.php?t=1613523
Edit: All of his ROMs for the Infuse can be found and d/l at Jokersax.com
Edit: I just reread your post......once you are on GB, you won't use Odin again. You will use whatever ICS zip to flash your ROM using CWM. Same thing with JB.
Shawn said:
Follow all steps, don't skip a thing. As for wiping, wipe Cache, Data, Dalvik, and format /System when going from GB to ICS and ICS to JB. That UCLB3 file is Gingerbread stock and you have to go to gingerbread before you go to ICS.
Also, if you are confident that your phone won't get disconnected from Odin while flashing the UCLB3 file, flash the GB bootloaders while you're at it. If the flash fails while flashing bootloaders then your device is bricked so be sure about Odin before you flash them.
Sent from my SGH-I997 using xda app-developers app
Click to expand...
Click to collapse
okay i think i understand....never has my phone disconnected during a flash with odin, ive always gotten a straight pass...exactly how important are the bootloaders anyways? if failures happen b/c of faulty usb cords, then im good...if bricking happens b/c of "unlucky chance" then id rather avoid it.... either way ill start the whole process tonight after i put the kiddos away so i can concentrate 100%.
thanks again for the tips
dparrothead1 said:
Since you have already used Odin, I would use option "C". The best thing you can do is read everything two or three times. There are also many vids on YouTube that are helpful.
Once you are on GB.....just pick out any ICS ROM an flash it. Once it installs, I wouldn't even bother sitting it up and then you can go to JB.
Th3Bill uses an Aroma installer in his ROMs and the first time you use it, you will have to flash his aroma-prep first.
Hang in there....go slowly...and read. This gets easier and easier the more you do it. I always just d/l the zips to my phone and never even have to mess with the PC.
http://forum.xda-developers.com/showthread.php?t=1613523
Edit: All of his ROMs for the Infuse can be found and d/l at Jokersax.com
Edit: I just reread your post......once you are on GB, you won't use Odin again. You will use whatever ICS zip to flash your ROM using CWM. Same thing with JB.
Click to expand...
Click to collapse
okay, ill take ur advice and use option c. froyo to gb using odin and possibly bootloaders, then from gb to ics, ics to jb using cwm
wish me luck!
Bootloaders prevent Rainbow fault I guess you could call it in ICS. You don't have to flash them but its recommended. If you have any problems, post and you'll get help pretty quick.
Sent from my SGH-I997 using xda app-developers app
Shawn said:
Bootloaders prevent Rainbow fault I guess you could call it in ICS. You don't have to flash them but its recommended. If you have any problems, post and you'll get help pretty quick.
Sent from my SGH-I997 using xda app-developers app
Click to expand...
Click to collapse
so far so good, it seems i need to do the gb bootloader after all...got the rainbow screen....i have my gbbootloader file ready to go....only thing is i want to confirm where i put the file, i've searched and i can only find a procedure for heimdall not odin...do i put the md5 file in PDA or bootloaders?? also it says in heimdall to tick bootloaders, do i do the same in odin??? it also says to flash twice....?? ok im really not risking a hard brick, i'll be patient and wait
http://forum.xda-developers.com/showthread.php?t=1878458
i'll wait for your answer before i proceed....after this i'll continue to flash ics and then jb...
btw, am i supposed to flash ics twice?? that's what the [GUIDE] How To Flash JB says,
"9. Flash ICS Rom, then ICS Gapps"
but when i tried to flash ics a second time i couldn't (because of rainbow screen, and because it didn't show up in my directory....and where does ICS Gapps show up?
thanks again
If you downloaded the bootloaders linked in the guide, then yes, they go on the pda slot. You only have to flash once.
Heimdall-one click is the one you must flash once before it allows you to flash the bootloaders too.
Edit: to fully install ics you must flash twice, because I believe that what it does when coming from GB is that it just flashes the ics kernel on the first flash, requiring you to run it a second time after rebooting for it to install the complete rom.
Ics gapps are often linked in the rom OPs, although you don't need to flash them if you are headed to JB.
Sent from my sweet & buttery Infuse
andros11 said:
If you downloaded the bootloaders linked in the guide, then yes, they go on the pda slot. You only have to flash once.
Heimdall-one click is the one you must flash once before it allows you to flash the bootloaders too.
Sent from my sweet & buttery Infuse
Click to expand...
Click to collapse
That's odd, I flashed GB bootloaders in Odin from a rooted stock GB. But andros is right about going in the PDA slot. Maybe its just me that didn't have to flash with heimdall first.
Sent from my JellyBeaned Infuse, unofficial cm10
Shawn what I meant is that heimdall one-click wont allow you to flash bootloaders the 1st time, so you must run it once and then a 2nd time but with "flash bootloaders" ticked on.
There's no need to use heimdall before flashing them with Odin.
Sent from my sweet & buttery Infuse
Oh, I see what you mean. My mistake.
Sent from my JellyBeaned Infuse, unofficial cm10
Alright guys, I'm officially a jelly beaner!! Thanks again to all who replied and helped me out, couldn't have done it without your help everything seems to we working fine (with the exception of a few apps that aren't compatible, but they weren't that important ) only issue I have now is that I can't use my data plan and surf the web I configured everything just as I had it before according to my carrier and nothing ...... could it have something to do with the change in modem? When I scan for available network operators I get two options one says :NICMS and the other is just a number 71021... any ideas?
Also, when installing jb in the initial setup it asked which would be the defualt location to save I think I chose the sdcard instead of the emmc directory. ..can I change that setting?
I'm pretty sure you can change the setting, but not sure how. Also, your APNs might be messed up. There's a thread with working APNs. One sec and I'll link it.
Edit: http://forum.xda-developers.com/showthread.php?t=1791526
Sent from my JellyBeaned Infuse, unofficial cm10
Shawn said:
I'm pretty sure you can change the setting, but not sure how. Also, your APNs might be messed up. There's a thread with working APNs. One sec and I'll link it.
Edit: http://forum.xda-developers.com/showthread.php?t=1791526
Sent from my JellyBeaned Infuse, unofficial cm10
Click to expand...
Click to collapse
Thanks for the link Shawn, I looked it over, not sure it could apply since I don't live in the states.. but I'll use it as a start.
marielacvn said:
Thanks for the link Shawn, I looked it over, not sure it could apply since I don't live in the states.. but I'll use it as a start.
Click to expand...
Click to collapse
It probably won't but you never know.
how is [ROM][JellyBean][4.1.1]Unofficial CM10 - Updated CM10 9/14 Butter - MTD - OC Kernel working out? since ive gotten cna nightly my camera and video are extremly buggy, more than id like...what works and doesnt work in unofficial cm10
So I just rooted my Verizon Galaxy S3 and unlocked the bootloader. I flashed Clockworkmod recovery using Rom Manager to update to the latest version. Made a nandroid, installed Titanium Backup, linked it to my Dropbox and uploaded. I downloaded the latest CM10 nightly to flash but the stock android recovery appeared instead of CWM. Found some info that I need to flash a clockwork compatible kernel first. The questions I have are: If I install the latest CM 10 nightly will it automatically install a clockwork compatable kernel? If not, where can I download it from? and if I do need to flash a kernel first can anyone give me detailed instructions how to do this as i'm relatively new to this stuff and don't want to brick my phone. Thanks, any info would help.
iwearthebelt said:
So I just rooted my Verizon Galaxy S3 and unlocked the bootloader. I flashed Clockworkmod recovery using Rom Manager to update to the latest version. Made a nandroid, installed Titanium Backup, linked it to my Dropbox and uploaded. I downloaded the latest CM10 nightly to flash but the stock android recovery appeared instead of CWM. Found some info that I need to flash a clockwork compatible kernel first. The questions I have are: If I install the latest CM 10 nightly will it automatically install a clockwork compatable kernel? If not, where can I download it from? and if I do need to flash a kernel first can anyone give me detailed instructions how to do this as i'm relatively new to this stuff and don't want to brick my phone. Thanks, any info would help.
Click to expand...
Click to collapse
Did you unlock your bootloader? for a custom recovery to stick you need to unlock your bootloader. Follow this guide
http://forum.xda-developers.com/showthread.php?t=1762709
darkhawk3383 said:
Did you unlock your bootloader? for a custom recovery to stick you need to unlock your bootloader. Follow this guide
http://forum.xda-developers.com/showthread.php?t=1762709
Click to expand...
Click to collapse
I did, had it unlocked and rooted. I guess there was some sort of issue with Rom Manager on the S3. I use it on my Galaxy Nexus and have no issues. I ended up abandoning what I was doing, uninstalling Rom Manager and going a different route. I have no prior experience with Odin but figured out how to install CWM . Downloaded I535vrblk1, flashed CWM, unlocked & rooted again. . Thanks anyway for the reply.
You can reinstall ROM Manager. It is something to do with some of the newer OTA's and the leaks. I have read a few posts in the forums about this in the GS3 and I really can't remember the fix but your recovery not sticking had nothing to do with ROM Manager. I think the fix was when you rebooted to recovery to flash a kernel right away, whether it be KT747, LK, or any of the other. Now that I typed this I'm about 99% sure that was the fix. Like I said above though, it has nothing to do.with ROM Manager, so if you're like me and find a lot of the tools in it handy you should be able to reinstall it. If you have a problem again just flash a kernel.
Sent from one of the many Anthropomorphic Personalities on the Disc
I have a samsung Galaxy S t959v from t-mobile and happened to succesfuly root it and flashed a custom kernel (bhundven-blastoff-v2.5) and then flashed a custom rom.It happened that i mistakenly flashed back the original samsung kernel.now the phone wont load the OS.I am looking for a way to return the blastoff kernel (Keeping in mind that the phone only accesses the samsung custom recovery and download mode).
Please HELP!!!!! to all gurus out there.....
Go to this link and download one of the AntonX kernels.
You can look at the guide in the second link in my signature. Instead of flashing the ROM .jar files I listed - use the AntonX kernel you downloaded. It is the same directions to flash the kernel excluding the flashing bootloaders section.
kERNEL iSSUE
lumin30 said:
Go to this link and download one of the AntonX kernels.
You can look at the guide in the second link in my signature. Instead of flashing the ROM .jar files I listed - use the AntonX kernel you downloaded. It is the same directions to flash the kernel excluding the flashing bootloaders section.
Click to expand...
Click to collapse
Thank you for replying my post it really means alot to me.
Back to business,my problem is the phone is stuck on the samsung/ t-mobile splash screen.I Tried flashing the heimdall one click collection to return the stock firmware but I got an error message saying kernel failed to load.I have read that odin could flash kernels but havent see any thread for the galaxy s 4g t-mobile.
Try the one click again. It sometimes it will take a couple tries for whatever reason. Make sure USB is firmly in place. Make sure download is good. And if it still doesn't work use a different USB port.
The ODIN One-Click is called Gremlin Remover. Read up on the driver issues and how to avoid them in the guide I mentioned.
Ok so im planning on flashing in cyanogenmod v9.1 and then up to ultragen v1.1 with the jb and tw5 taste, now if i do this do i still need to flash in a version of gapps or is there one in the ultragen rom, and in order to do the flashing can i use the cmw-based voodoo lagfix recover 5.0.2.7 to flash in the cm9.1 or do i need to use odin or something, im kinda new to all this, all ive done to the phone so far is recover from soft brick by using odin to flash back to stock and then using some off site instructions to root the phone which also apparently came along with the voodoo recovery, so im basically a noob at this
jimmy2989 said:
Ok so im planning on flashing in cyanogenmod v9.1 and then up to ultragen v1.1 with the jb and tw5 taste, now if i do this do i still need to flash in a version of gapps or is there one in the ultragen rom, and in order to do the flashing can i use the cmw-based voodoo lagfix recover 5.0.2.7 to flash in the cm9.1 or do i need to use odin or something, im kinda new to all this, all ive done to the phone so far is recover from soft brick by using odin to flash back to stock and then using some off site instructions to root the phone which also apparently came along with the voodoo recovery, so im basically a noob at this
Click to expand...
Click to collapse
No need to flash the gapps with Utragen ROM its included.
Use CM recovery to flash no need for Odin ... cm 5.0.2.x is fine.
I always go to cm 9 then work up never had a problem.
Ultragen is a very stable ICS based rom .. I used it for awhile.
Be sure you follow the OP`s flashing instructions.
If you want JB try slim 4.1.2 its very stable...if you can live
without GPS.
Sent from my Nexus 7 using xda premium
Thanks, everythings installed and its running beautifullyi thanked your post ill mark this thread as solved