Database Info

Bootloader D0.11.... Blank?

My bootloader is blank and i guess i bricked my global.
(its stuck at the bootlogo and it just stays there.)
im using Froyo but i tried flashing VenusX 3.2 Gingerbread and now im screwed, i havent had a phone for a long time because of this and i need help NOW.
And if anyone could also help with this, i need the stock update.zip included on the sd card when you bought it.

Have you tried restoring the phone using RSDLite? See instructions at http://droid.koumakan.jp/wiki/SBF for example.

Gasai Yuno said:
Have you tried restoring the phone using RSDLite? See instructions at http://droid.koumakan.jp/wiki/SBF for example.
Click to expand...
Click to collapse
Not flaming or anything, but everytime i posted a thread with this problem, the first sentence is "bootloader is blank"
so when i try to connect to my pc or rsd lite for that matter, theres no response.
So... SBF'ing is out of question. unless theres a way of fixing my bootloader theres no hope and i just have a nice paperweight.

[Q] maybe i brick my phone

i have a motorola atrix 2 at&t(MB865).my phone was 2.3.6
1. I try to flash this firmware 5.5.1-EDEM-28-37-MEARET_cfc.xml.zip from this site http://sbf.droid-developers.org/edison/list.php with rsd.at 7/20 rsd was writting fail.i tried again with same result.after this my phone had problem with boot.the only method for boot was "vol down"+"vol up"+"power" and after i was pressing "Normal powerup".after all these my phone booted normal and worked normal.
2.after i flashed the Blur_Version.55.13.25.MB865.ATT.en.US.zip (ics) from this http://forum.xda-developers.com/showthread.php?t=1779968 and my phone was working normal but with the same problem with the boot.
3.after i tried to use this utillity http://forum.xda-developers.com/showthread.php?t=1805975 .this process had some failure and after this my phone is unable to boot.
with "vol down"+"vol up"+"power" i can choose normal power up, but phone stucks at boot image.in addition i can choose recovery and phone boots at recovery mode.i choose to update from sd with this file Blur_Version.55.13.25.MB865.ATT.en.US.zip but my phone writes that its unable to flash this.
4.after i try to flash InlineFlashing_edison_5.5.175.16_cfc_p3_APBP_CID28 5.zip with rsd.the rsd wrote fail at 3/20 in addition i use the replace.zip with the same result.
5.after i try again the 3rd step with same results.
can anyone help me?

This whole mess started when you tried to flash MEARET firmware on your AT&T phone. NEVER mix firmware!
And trying recovery at this point is not going to work, as the ICS zip is just a large patch file for 2.3.6. And since it failed on the fxz, a portion of your system is missing so ICS won't install. You need to fxz back.
What step is the script falling at? A screenshot would be helpful.
And for the future, please post questions in the Q&A form.
Sent from my SAMSUNG-SGH-I727 using xda premium

you mean at 3rd step?
sorry.please move this thread at q&a

Yes the script from step three is what's going to save you here.
But we need to know where it's failing at.
Sent from my SAMSUNG-SGH-I727 using xda premium

i can see that problem is with cbt, recovey and cdrom partition.

Uh oh.
Which ICS version did you install? Please show need the thread.
I need to know which leak it was.
Sent from my SAMSUNG-SGH-I727 using xda premium

Blur_Version.55.13.25.MB865.ATT.en.US.zip

Well I hate to tell you man. But you are soft bricked until we find an fxz for ICS.
Recovery and cdrom are failing because cdt.bin isn't flashing. And we haven't found a fix for this yet.
Although the strange thing is that this shouldn't be happening on the first leak... but it is...
So you're bricked mate.
Sent from my SAMSUNG-SGH-I727 using xda premium

ok, i will wait.
thanks.
but please explain to me.i had a motorola a1200 and a siemens sx1.when i flashed a firmware, all the flash memory erased and new data wrote at flash.if i had bootloader, all was fine.the only method to brick a phone was to replace the battery when flash the bootloader(or flash false bootloader).
at A2, why when i write a new bootloader and new mbr(and partition table?) is necessary to flash the same or newer edition of firmware?this is because bootloader is locked?
i thought when i flash a new firmware, all the flash memory erased and writes new data(at the begining the bootloader, after mbr with partition table, after the image(i think this is the kernel of linux) and all other the data)

macnick said:
i have a motorola atrix 2 at&t(MB865).my phone was 2.3.6
1. I try to flash this firmware 5.5.1-EDEM-28-37-MEARET_cfc.xml.zip from this site http://sbf.droid-developers.org/edison/list.php with rsd.at 7/20 rsd was writting fail.i tried again with same result.after this my phone had problem with boot.the only method for boot was "vol down"+"vol up"+"power" and after i was pressing "Normal powerup".after all these my phone booted normal and worked normal.
2.after i flashed the Blur_Version.55.13.25.MB865.ATT.en.US.zip (ics) from this http://forum.xda-developers.com/showthread.php?t=1779968 and my phone was working normal but with the same problem with the boot.
3.after i tried to use this utillity http://forum.xda-developers.com/showthread.php?t=1805975 .this process had some failure and after this my phone is unable to boot.
with "vol down"+"vol up"+"power" i can choose normal power up, but phone stucks at boot image.in addition i can choose recovery and phone boots at recovery mode.i choose to update from sd with this file Blur_Version.55.13.25.MB865.ATT.en.US.zip but my phone writes that its unable to flash this.
4.after i try to flash InlineFlashing_edison_5.5.175.16_cfc_p3_APBP_CID28 5.zip with rsd.the rsd wrote fail at 3/20 in addition i use the replace.zip with the same result.
5.after i try again the 3rd step with same results.
can anyone help me?
Click to expand...
Click to collapse
Use rsdlite and flash the Asian or Chinese stock firmware worked for me when I had this issue now I'm running 4.1.1 cm10 jb and its awesome!
If this works for you hit my thanks button
P.s phone must be in fast boot mode
Sent from my MB865 using XDA Premium HD app

Code:
whiteboi-hakz
can you tell to me which firmware you mean? and where i can find.
Code:
Fall of Enosis
i forget to tell you that i did the ics ota update from at&t.
so maybe i have the same problem with others...

macnick said:
Code:
whiteboi-hakz
can you tell to me which firmware you mean? and where i can find.
Code:
Fall of Enosis
i forget to tell you that i did the ics ota update from at&t.
so maybe i have the same problem with others...
Click to expand...
Click to collapse
http://sbf.droid-developers.org/edison/list.php
There is the firmware you wanted dude
Download retail Chinese
Sent from my MB865 using XDA Premium HD app

macnick said:
Code:
Fall of Enosis
i forget to tell you that i did the ics ota update from at&t.
so maybe i have the same problem with others...
Click to expand...
Click to collapse
If you did the OTA ICS update you WILL NOT be able to flash the FXZ back. We have no way out of this right now. And if you are bootlooping or stuck on the splash screen then you are bricked. Sorry mate.
Please read these threads:
http://forum.xda-developers.com/showthread.php?t=1897042
http://forum.xda-developers.com/showthread.php?t=1882335
whiteboi-hakz said:
http://sbf.droid-developers.org/edison/list.php
There is the firmware you wanted dude
Download retail Chinese
Sent from my MB865 using XDA Premium HD app
Click to expand...
Click to collapse
Whiteboi, thanks for your consideration of others but PLEASE, research before you try to help others. For one thing, he is on an MB865 AT&T phone and therefore MUST download the firmware for an AT&T phone. The international versions of the A2 are completely different, including radio, WiFi and the like. NEVER mix firmwares.
Also, he already flashed international firmware which is what got him into this predicament in the first place. He also installed the OTA update for ICS for which there is NO GOING BACK. Read the threads I gave him and educate yourself man.
I applaud you generosity, but if he wasn't already bricked, your advice would have surely/quite possibly bricked him. Be careful man.
Read, read, read!

Fall of Enosis said:
If you did the OTA ICS update you WILL NOT be able to flash the FXZ back. We have no way out of this right now. And if you are bootlooping or stuck on the splash screen then you are bricked. Sorry mate.
Please read these threads:
http://forum.xda-developers.com/showthread.php?t=1897042
http://forum.xda-developers.com/showthread.php?t=1882335
Whiteboi, thanks for your consideration of others but PLEASE, research before you try to help others. For one thing, he is on an MB865 AT&T phone and therefore MUST download the firmware for an AT&T phone. The international versions of the A2 are completely different, including radio, WiFi and the like. NEVER mix firmwares.
Also, he already flashed international firmware which is what got him into this predicament in the first place. He also installed the OTA update for ICS for which there is NO GOING BACK. Read the threads I gave him and educate yourself man.
I applaud you generosity, but if he wasn't already bricked, your advice would have surely/quite possibly bricked him. Be careful man.
Read, read, read!
Click to expand...
Click to collapse
Dude it works and he can then reflash his fw so what's the big deal the one I bricked was at&t non international and that method worked great but I'll take your advice man
Sent from my MB865 using XDA Premium HD app

i tried your method without any Success.
so "fall of enosis" is right.maybe the solve of the problem is to find an ics firmware(from at&t????)

macnick said:
i tried your method without any Success.
so "fall of enosis" is right.maybe the solve of the problem is to find an ics firmware(from at&t????)
Click to expand...
Click to collapse
OK well was worth a try I guess ay try his method and let's us know
Sent from my MB865 using XDA Premium HD app

macnick said:
i tried your method without any Success.
so "fall of enosis" is right.maybe the solve of the problem is to find an ics firmware(from at&t????)
Click to expand...
Click to collapse
Yeah man, if you OTA'd to ICS then I can almost guarantee it will fail at step 3 of the flash process which is the cdt.bin. If you are using the script it will also fail on the recovery portion and the cdrom portion. These are both because of the cdt.bin As of right now, we have no fix for this. Once again, this is the reason we are recommending people to ONLY use the first leak, and not OTA to ANYTHING unless it's 2.3.6 GB. Once again, reference the links I sent you.
You're bricked sir.
Until we find an ICS fxz. Which might be A LONG TIME.
Time to get a replacement/new phone.

Fall of Enosis said:
Yeah man, if you OTA'd to ICS then I can almost guarantee it will fail at step 3 of the flash process which is the cdt.bin. If you are using the script it will also fail on the recovery portion and the cdrom portion. These are both because of the cdt.bin As of right now, we have no fix for this. Once again, this is the reason we are recommending people to ONLY use the first leak, and not OTA to ANYTHING unless it's 2.3.6 GB. Once again, reference the links I sent you.
You're bricked sir.
Until we find an ICS fxz. Which might be A LONG TIME.
Time to get a replacement/new phone.
Click to expand...
Click to collapse
Thanked you as earned it man
Sent from my MB865 using XDA Premium HD app

Atrix 2 ics leak #2 stuck on cm10 boot!

Okay, so here's a long story short. I flashed AT&T ICS leak #2 when I first got my replacement due to a brick. I ran SCV7 for a week or so and decided to try out CM10. I restored my backup of stock/rooted backup. Uninstalled highjacks, packages and app (bootmenu) itself. I then installed our OG A2 bootstrap, installed fine, installed CM10, played around with it for awhile. Realized I didnt reinstall the OG A2 Bootstrap so went ahead and did that. (without booting into recovery yet) I then later in the day decided to REBOOT my phone to only find me stuck on the CM10 boot animation. I battery pulled, plugged in to see if any recovery would show, none, just the battery charge percentage. I then battery pulled again, got into stock recovery, tried a data and cache wipe to no effect. My problem is, there is NO FXZ for the AT&T leak #2, I have no recovery besides stock and the only thing I can do is take my 32GB SD card out and add/delete files/everything. I saddly did not make a copy of the system.img but was wondering if anyone else possibly did? This would be greatly appreciated as I am stuck with a soft brick until then or a new FXZ to work with AT&T leak #2. Any suggestions or help is very much appreciated. Thanks all for reading and I'm praying for a miracle in my phone right about now lol!

DX2Trip said:
Okay, so here's a long story short. I flashed AT&T ICS leak #2 when I first got my replacement due to a brick. I ran SCV7 for a week or so and decided to try out CM10. I restored my backup of stock/rooted backup. Uninstalled highjacks, packages and app (bootmenu) itself. I then installed our OG A2 bootstrap, installed fine, installed CM10, played around with it for awhile. Realized I didnt reinstall the OG A2 Bootstrap so went ahead and did that. (without booting into recovery yet) I then later in the day decided to REBOOT my phone to only find me stuck on the CM10 boot animation. I battery pulled, plugged in to see if any recovery would show, none, just the battery charge percentage. I then battery pulled again, got into stock recovery, tried a data and cache wipe to no effect. My problem is, there is NO FXZ for the AT&T leak #2, I have no recovery besides stock and the only thing I can do is take my 32GB SD card out and add/delete files/everything. I saddly did not make a copy of the system.img but was wondering if anyone else possibly did? This would be greatly appreciated as I am stuck with a soft brick until then or a new FXZ to work with AT&T leak #2. Any suggestions or help is very much appreciated. Thanks all for reading and I'm praying for a miracle in my phone right about now lol!
Click to expand...
Click to collapse
Hey, and sort of welcome back...
But I hate to be the bearer of bad, bad news... you have a softbrick, and there is NOTHING you can do.
Next time, read everything in an OP... LOL, look who I am telling this to....
The CM10 installs come with their own CWM built in, and flashing bootstrap is what bootlooped you, so after you get another warranty replacement (yes, you HAVE to do this), I would install leak #1 ONLY, then flash cm10 with bootstrap, then do not reinstall any boot hijacks or CWM "like" recovery (bootmenu), because all you have to do it hit the vol down button right as you see the blue led flash during the M dual core logo.

Or enter the CM10 recovery menu and so on and so forth.
This is how I got out of a cm10 boot-loop.
I just restored from bootmenu backup via adb.

tcf38012 said:
Or enter the CM10 recovery menu and so on and so forth.
This is how I got out of a cm10 boot-loop.
I just restored from bootmenu backup via adb.
Click to expand...
Click to collapse
he can't, he installed bootstrap while on cm10m, so he can't get to cwm anymore.

Scratch that ----- Deleted

Well, thanks everyone. Specially you jim. Anyone wanna throw me an fxz they think MIGHT work for the second ICS leak? I'm willing to take the risk since I have nothing else to lose. Ill be most likely calling AT&T tomorrow and give some excuse. Soft brick or hard brick...Ill get a replacement...
Sent From My Eclipsed DROID X2!

DX2Trip said:
Well, thanks everyone. Specially you jim. Anyone wanna throw me an fxz they think MIGHT work for the second ICS leak? I'm willing to take the risk since I have nothing else to lose. Ill be most likely calling AT&T tomorrow and give some excuse. Soft brick or hard brick...Ill get a replacement...
Sent From My Eclipsed DROID X2!
Click to expand...
Click to collapse
I will get with alteredlikeness and see if we can possibly think of something together on this one. The first thought would be to try an mearet/searet fxz for 2.3.6 since they can fxz back with out any mods to thier 2.3.6 or 2.3.5 fxz from thier ICS leaks, but I am thinking that will still brick you, but interested to see anyhow.
So I will see if alteredlikeness and I can think of some other way to try. He or I will PM you either way.

jimbridgman said:
I will get with alteredlikeness and see if we can possibly think of something together on this one. The first thought would be to try an mearet/searet fxz for 2.3.6 since they can fxz back with out any mods to thier 2.3.6 or 2.3.5 fxz from thier ICS leaks, but I am thinking that will still brick you, but interested to see anyhow.
So I will see if alteredlikeness and I can think of some other way to try. He or I will PM you either way.
Click to expand...
Click to collapse
he can flash just a system. img from ics though, And that should recover it
Sent from my MB865 using xda premium

lkrasner said:
he can flash just a system. img from ics though, And that should recover it
Sent from my MB865 using xda premium
Click to expand...
Click to collapse
You know, I was seeing in recovery how youbcan flash an update through sd AND system which has a lost and found folder and recovery folder. Dont know if this is of any info but either way because I wouldnt know how to put anything in system since I cant seem to get adb to recognize or moto-fastboot...I'm in a very confused state of mind and almost came to the point of hard brick but I refuse. I'll leave it up to ya devs. Thanks againg everyone.
Sent from my MB870 using xda premium

i have same issue , any way to flash system img, and where whould i get system img from? i have preiviously backed up thru cwm

justdrew said:
i have same issue , any way to flash system img, and where whould i get system img from? i have preiviously backed up thru cwm
Click to expand...
Click to collapse
Try following this:
http://forum.xda-developers.com/showthread.php?t=1926873

First Softbrick it seems In Trouble
jimbridgman said:
Try following this:
http://forum.xda-developers.com/showthread.php?t=1926873
Click to expand...
Click to collapse
Guys need your urgent help i am into a trouble what is it called technically may be a Soft brick but this is what has happened.
I was trying the Magic mod the installation went superb booted the phone it worked properly and then i used the bootstrap :silly: and tried starting the phone in recovery after which my phone is now stuck at magic mod boot animation. PLEASE HELP.
I am upto a point where have installed drivers latest rsd lite 6.0 ready with the extracted fxz 6.7.2_EDEM-18-SEARET_cfc.xml but phone is not showing up in rsd lite so that i can flash my phone. Phone says USB connected in AP Fastboot mode have a look at the attachment of my desktop. Please HELP guys....
Thanks & Regards,
Beginner Android (Ravi D)

havent you just posted this in the any question answered here thread and getting help there ??

Wow, almost forgot I made this thread lol. But sounds like your drivers need a good updating. Reboot PC after updating and try again is all I can say. Hope this helps.
Sent from my MB865 using xda premium

[MODS] Lock/Delete me [/MODS]

MODS: Please lock this thread. And delete it if I can keep the thanks stats, Thanks.
If your looking for an improved version, see here.
thanks!!!

tcf38012 said:
OK, so finally I recovered my phone from flashing an unsigned system.img on the 67.21.125 ICS (The second version).
I'll go into detail later but here is what I did:
First, I flashed everything included in my fxz minimal.fastboot files.
Second, I flashed the 2.3.6 boot, system, and webtop partition (DON'T FLASH ANY OTHERS RATHER THAN THE boot,system, and grfs img's or you will hard brick your device).
Third, I entered recovery and applyed the first ICS leak, then it went into fastboot and complained about recovery and cdt so I flashed it from the minimal fxz's. And then I re-applyed the ics leak and then Something unreal happened, it booted :laugh::laugh::laugh:.
Last, I OTA'ed to the .125 leak again and everything was back to %100 normal.
And thats the end of the story, someone can write a tutorial from there .
Cheers!!!
PS: I'm not responsible if you bricked your device for good becuase of this, SO DON'T BLAME ME!!!
PSS: If this helped, then please hit the THANKS button below.
Click to expand...
Click to collapse
Nice job!!!

So to make this clear, you found a way to go back to 2.3.6 from the second ics leak? Im not really understanding this.
Sent from my MB865 using xda premium

That is huge! Thank you..
Sent from my phone's mind

tmease1 said:
So to make this clear, you found a way to go back to 2.3.6 from the second ics leak? Im not really understanding this.
Sent from my MB865 using xda premium
Click to expand...
Click to collapse
Accually, It is not downgrading to gb but getting ics working again. If you try to boot gb instead of going to recovery, then you would boot loop.
So if your bricked, then this is the solution to fix it.

tcf38012 said:
Accually, It is not downgrading to gb but getting ics working again. If you try to boot gb instead of going to recovery, then you would boot loop.
So if your bricked, then this is the solution to fix it.
Click to expand...
Click to collapse
Ya i got it after reading it again, thanks.
Sent from my MB865 using xda premium

Wow...this is EXACTLY what I need...I'm not sure as to how exactly you did this. The wording confuses me I guess...feel like a noob lately :/ But excellent work either, Hope I can get this down. I nees to get back to stock ICS but am only able to get into stock ICS recovery/fastboot. Awesome...I hear hope!
Sent from my MB870 using xda premium

DX2Trip said:
Wow...this is EXACTLY what I need...I'm not sure as to how exactly you did this. The wording confuses me I guess...feel like a noob lately :/ But excellent work either, Hope I can get this down. I nees to get back to stock ICS but am only able to get into stock ICS recovery/fastboot. Awesome...I hear hope!
Sent from my MB870 using xda premium
Click to expand...
Click to collapse
Yes his wording confused me a well, don't feel bad. I'm still not sure how he did this.
Sent from my MB865 using xda premium

DX2Trip said:
Wow...this is EXACTLY what I need...I'm not sure as to how exactly you did this. The wording confuses me I guess...feel like a noob lately :/ But excellent work either, Hope I can get this down. I nees to get back to stock ICS but am only able to get into stock ICS recovery/fastboot. Awesome...I hear hope!
Sent from my MB870 using xda premium
Click to expand...
Click to collapse
tmease1 said:
Yes his wording confused me a well, don't feel bad. I'm still not sure how he did this.
Sent from my MB865 using xda premium
Click to expand...
Click to collapse
Well, a few things are not so clear yet - give us a little while to try and come up with a more direct way - or for tcf to put together a guide - but this is my understanding (please correct me or add if necessary, tcf):
He's talking about the minimal fxz package he put together from here: http://forum.xda-developers.com/showthread.php?t=1912035 (which only has a linux script I believe - but you could flash them one by one through the command prompt in windows - or, we could get a batch file made up also).
Then, the system.img, recovery.img, and grfs.img only from 2.3.6 (found in the 2.3.6 fxz from here or the same are in the leak#1 2.3.6 fxz).
Then he applied the leak#1 ota package.
Got thrown back into fastboot.
Flashed the cdt.bin again from the minimal fxz package (which is actually from ICS leak#2/soak package) -- but not sure if he flashed recovery.img from there again also..
Then he re-applied the leak (#1?) again - and it booted to ICS.
So, I am not sure about the timing of things or how it exactly worked out yet, but I notice the linux script for the minimal fxz package doesn't have a reboot-bootloader before the cdt.bin flash - also there should probably be a pause after the reboot-bootloader lines to allow it to reboot completely before attempting to flash the next file. That may be partial reason for the multiple flashings of the cdt.bin.. but, again, maybe not - maybe it's all in some magical order... though a few of us will be digging a bit deeper into this I'm sure.
Thanks again to tcf38012 for pushing this thought of upgrading back to the leak - we were on that path at one time, but the pieces of the puzzle weren't fitting together..

alteredlikeness said:
Well, a few things are not so clear yet - give us a little while to try and come up with a more direct way - or for tcf to put together a guide - but this is my understanding (please correct me or add if necessary, tcf):
He's talking about the minimal fxz package he put together from here: http://forum.xda-developers.com/showthread.php?t=1912035 (which only has a linux script I believe - but you could flash them one by one through the command prompt in windows - or, we could get a batch file made up also).
Then, the system.img, recovery.img, and grfs.img only from 2.3.6 (found in the 2.3.6 fxz from here or the same are in the leak#1 2.3.6 fxz).
Then he applied the leak#1 ota package.
Got thrown back into fastboot.
Flashed the cdt.bin again from the minimal fxz package (which is actually from ICS leak#2/soak package) -- but not sure if he flashed recovery.img from there again also..
Then he re-applied the leak (#1?) again - and it booted to ICS.
So, I am not sure about the timing of things or how it exactly worked out yet, but I notice the linux script for the minimal fxz package doesn't have a reboot-bootloader before the cdt.bin flash - also there should probably be a pause after the reboot-bootloader lines to allow it to reboot completely before attempting to flash the next file. That may be partial reason for the multiple flashings of the cdt.bin.. but, again, maybe not - maybe it's all in some magical order... though a few of us will be digging a bit deeper into this I'm sure.
Thanks again to tcf38012 for pushing this thought of upgrading back to the leak - we were on that path at one time, but the pieces of the puzzle weren't fitting together..
Click to expand...
Click to collapse
Thanks for trying to clarify this. It seems like it would be time consuming for me to try since I'm a windows user. I am glad that he did find a way to get some of our soft bricked users back on track.
Sent from my SAMSUNG-SGH-I997 using xda premium

thanks for good job, waiting your instructions....

Yeah, this great man! I got an A2 that is stuck at the boot logo from a screw up on the second leak. I have a Samsung skyrocket now, so I'm the perfect guinea pig to try out what you need! Eagerly awaiting further instructions!
Sent from my SAMSUNG-SGH-I727 using xda premium

Did Anyone tested this?

I'll write a tutorial after school which I'm about to go to (High School). I get home at 3:45 - 4:30 and I get done my homework at 5:00 - 5:30 so I'll try to write it at 5:45.
Just hang in there!
Cheers!!!

2.3.5 att stock to 2.3.5 trough rsd

i just got my atrix 2 to replace my atrix 1 from bay...
the phone come with a ATT stock 2.3.5 rom but it wont update OTA...
my question...
can i rsd send the stock 2.3.5 flash to the phone and then try to update OTA?
i dont know what people before me has done to the phone so how safe i should go which rom?
thanx

htchd2fix said:
i just got my atrix 2 to replace my atrix 1 from bay...
the phone come with a ATT stock 2.3.5 rom but it wont update OTA...
my question...
can i rsd send the stock 2.3.5 flash to the phone and then try to update OTA?
i dont know what people before me has done to the phone so how safe i should go which rom?
thanx
Click to expand...
Click to collapse
Yes you can use rsd lite to return to 100% stock and then try the ota..i recommend upgrading to leak 1 since you cant go back to gb if you update to ics ota
Sent from my MB865 using xda app-developers app

devilhunter47 said:
Yes you can use rsd lite to return to 100% stock and then try the ota..i recommend upgrading to leak 1 since you cant go back to gb if you update to ics ota
Sent from my MB865 using xda app-developers app
Click to expand...
Click to collapse
leak1 trough rsd flashing? after 2.3.5 stock?
ics leak as good support for webtop? or gb 2.3.6 better? thanx again

htchd2fix said:
leak1 trough rsd flashing? after 2.3.5 stock?
ics leak as good support for webtop? or gb 2.3.6 better? thanx again
Click to expand...
Click to collapse
Just use the 2.3.6 FXZ through RSD lite. If you want good webtop then stay at 2.3.6, because webtop 3.0 is more like tablet mode and not ubuntu anymore.
Here is a link to get the 2.3.6 fxz:
http://sbf.droid-developers.org/edison/InlineFlashing_edison_5.5.175.25_cfc_p3_APBP.xml.zip
All of the FXZ files are here:
http://sbf.droid-developers.org/edison/list.php
If you really want to try ICS, then I would go for leak one from 2.3.6 just do not root or install anything while in 2.3.6.
Here are the instructions for that. Again though ICS does not have ubuntu for webtop, it is just android in tablet mode:
http://forum.xda-developers.com/showthread.php?t=1779968
If you like the ubuntu webtop and want to stay on 2.3.6, my hack works really well for unlocking the full potential of ubuntu webtop, that is here:
http://forum.xda-developers.com/showthread.php?t=1375042

jimbridgman said:
Just use the 2.3.6 FXZ through RSD lite. If you want good webtop then stay at 2.3.6, because webtop 3.0 is more like tablet mode and not ubuntu anymore.
Here is a link to get the 2.3.6 fxz:
http://sbf.droid-developers.org/edison/InlineFlashing_edison_5.5.175.25_cfc_p3_APBP.xml.zip
All of the FXZ files are here:
http://sbf.droid-developers.org/edison/list.php
If you really want to try ICS, then I would go for leak one from 2.3.6 just do not root or install anything while in 2.3.6.
Here are the instructions for that. Again though ICS does not have ubuntu for webtop, it is just android in tablet mode:
http://forum.xda-developers.com/showthread.php?t=1779968
If you like the ubuntu webtop and want to stay on 2.3.6, my hack works really well for unlocking the full potential of ubuntu webtop, that is here:
http://forum.xda-developers.com/showthread.php?t=1375042
Click to expand...
Click to collapse
f..k
my phone it wont boot now...
boot failure..
what s the option/
thanx

htchd2fix said:
f..k
my phone it wont boot now...
boot failure..
what s the option/
thanx
Click to expand...
Click to collapse
Are you sure you have an att branded phone? where did it fail in RSD lite, like which step?

jimbridgman said:
Are you sure you have an att branded phone? where did it fail in RSD lite, like which step?
Click to expand...
Click to collapse
i'm not sure how to check that..it has the att logo on the glass bottom part and boots with att logo
.thanx for helping bytheway..
managed to recovery replacing the boot img as suggested in other post and rebbot fine ...
now im scare to touch it untill know what im doing ....
can i rsd 2.3.6 file that you posted now?

htchd2fix said:
i'm not sure how to check that..it has the att logo on the glass bottom part and boots with att logo
.thanx for helping bytheway..
managed to recovery replacing the boot img as suggested in other post and rebbot fine ...
now im scare to touch it untill know what im doing ....
can i rsd 2.3.6 file that you posted now?
Click to expand...
Click to collapse
What do you mean you replaced the boot image? please give me a link to the thread you go that from... that is quite disturbing.
What I need you to do is to flash the 2.3.6 fxz file with RSD lite, and watch each step and make sure you get a PASS at the end, if not you might be failing in one of the steps, I think there are like 18 steps or something in the AT&T FXZ. I really need to know which step it is failing on, it should be something like step 3/18 or something like that... I really need to know that or if it goes all the way to the end and say PASS.
If you can grab a screen shot of the error or PASS that might also help as well.

jimbridgman said:
What do you mean you replaced the boot image? please give me a link to the thread you go that from... that is quite disturbing.
What I need you to do is to flash the 2.3.6 fxz file with RSD lite, and watch each step and make sure you get a PASS at the end, if not you might be failing in one of the steps, I think there are like 18 steps or something in the AT&T FXZ. I really need to know which step it is failing on, it should be something like step 3/18 or something like that... I really need to know that or if it goes all the way to the end and say PASS.
If you can grab a screen shot of the error or PASS that might also help as well.
Click to expand...
Click to collapse
the replace of the boot img i did trough fastboot cmd and was able to recover and boot fine
then i replaced the recovery that was also corrupted same in fastboot
now the only thing i miss is the webtop
and still i want to go and update to 2.3.6
this is the tread
http://forum.xda-developers.com/showthread.php?t=1493386

htchd2fix said:
the replace of the boot img i did trough fastboot cmd and was able to recover and boot fine
then i replaced the recovery that was also corrupted same in fastboot
now the only thing i miss is the webtop
and still i want to go and update to 2.3.6
this is the tread
http://forum.xda-developers.com/showthread.php?t=1493386
Click to expand...
Click to collapse
Yeah not the best idea. That ONLY should apply to NON-ATT phones, all you just did was put the 2.3.5 boot image on the 2.3.6 bad flash, you are still not whole. You may not be able to get this all right, after doing that, not easily at least... those instructions were out WAY before we had an official 2.3.6 FXZ, which is what you should be using.
I still need to know where RSD is failing, that is crucial to know what is happening.
From here on, if you want my help, DO NOT do anything unless I ask you to please!!! I am one the devs on this phone and our resident expert here. I am very meticulous, but I will get you back but you need to take this one step at a time, and do only what I ask and report back.

jimbridgman said:
Yeah not the best idea. That ONLY should apply to NON-ATT phones, all you just did was put the 2.3.5 boot image on the 2.3.6 bad flash, you are still not whole. You may not be able to get this all right, after doing that, not easily at least... those instructions were out WAY before we had an official 2.3.6 FXZ, which is what you should be using.
I still need to know where RSD is failing, that is crucial to know what is happening.
From here on, if you want my help, DO NOT do anything unless I ask you to please!!! I am one the devs on this phone and our resident expert here. I am very meticulous, but I will get you back but you need to take this one step at a time, and do only what I ask and report back.
Click to expand...
Click to collapse
to late...white led...dead....
shiut i can after i recovered the phone the first time......now is gone.
i was applying the 2.3.6 from your link via rsd and fail to reboot bootloader and phone did not go on after that
thank you anyway

do as jim says, he knows his s••t
Sent from the gray stuff inside my skull

htchd2fix said:
to late...white led...dead....
shiut i can after i recovered the phone the first time......now is gone.
i was applying the 2.3.6 from your link via rsd and fail to reboot bootloader and phone did not go on after that
thank you anyway
Click to expand...
Click to collapse
Yeah unfortunately you are screwed, sorry to say. The white LED means it is dead, no bringing it back. That is why I was trying to figure where things were going wrong, rather than having you risk further issues.
You might be able to find an atrix2 with a broken screen cheap on ebay and just put the good motherboard from that in your phone, and get yourself back up and running, I have seen them for 50-100 USD on ebay. There are instructions on how to replace the screen in the general section.

jimbridgman said:
Yeah unfortunately you are screwed, sorry to say. The white LED means it is dead, no bringing it back. That is why I was trying to figure where things were going wrong, rather than having you risk further issues.
You might be able to find an atrix2 with a broken screen cheap on ebay and just put the good motherboard from that in your phone, and get yourself back up and running, I have seen them for 50-100 USD on ebay. There are instructions on how to replace the screen in the general section.
Click to expand...
Click to collapse
motorolla is sending the phone repared or a new? i dont know i think a new one if this is cooked...
when they send back the other one i will be veeeeerrrry carefull.
thanx friend for all your help

htchd2fix said:
motorolla is sending the phone repared or a new? i dont know i think a new one if this is cooked...
when they send back the other one i will be veeeeerrrry carefull.
thanx friend for all your help
Click to expand...
Click to collapse
Well, they will most likely send it back to you with a referb, and it WILL have the stock ICS on it, and you will NOT be able to get back on GB and use the ubuntu webtop.

jimbridgman said:
Well, they will most likely send it back to you with a referb, and it WILL have the stock ICS on it, and you will NOT be able to get back on GB and use the ubuntu webtop.
Click to expand...
Click to collapse
well i know ...
i hate ics....the design is so poor.... GB much better style
may be as softaware some improvements but the style sucks....
not to talk about the webtop feature thats the only reason that push me to buy an atrix instead of a galaxy...
i only hope you guys will find a way to crack the bootloader....
thanx

Hello, I am sorry if I am hijacking this thread but that is not my intention. I have a similar situation here that I need help with. I just bought a used Atrix 2 yesterday and I am unable to use that.
It is running the following:
Android Version: 2.3.5
System Version: 55.11.11.MB865.ATT.en.US
Build Number: 5.5.1-175_EDFFW1-11
It was in factory reset after mode so i followed the instruction to register with google and my gmail added. But when go to contacts, it keep rotating to open AT&T address book and never comes out of it. So I cannot use my google contacts and has to dial the numbers every time (sucks). Secondly, I called AT&T about the address book problem and was told that is not their problem and asked me to update the Android. I tried updating endlessly but the phone always says 'The software is upto date and no update is necessary!" really?
I called at&t again w/o much success. Then I called Motorola and was told that the phone is running a strange unofficial (really, again?) android version that they cannot help either.
I did confirm the phone is not rooted.
Now, I have a beautiful looking phone that i cannot use. I am not familiar with rooting and all sorta things and can you please help me so i can use this phone?
Thanks a ton.

jsknair said:
Hello, I am sorry if I am hijacking this thread but that is not my intention. I have a similar situation here that I need help with. I just bought a used Atrix 2 yesterday and I am unable to use that.
It is running the following:
Android Version: 2.3.5
System Version: 55.11.11.MB865.ATT.en.US
Build Number: 5.5.1-175_EDFFW1-11
It was in factory reset after mode so i followed the instruction to register with google and my gmail added. But when go to contacts, it keep rotating to open AT&T address book and never comes out of it. So I cannot use my google contacts and has to dial the numbers every time (sucks). Secondly, I called AT&T about the address book problem and was told that is not their problem and asked me to update the Android. I tried updating endlessly but the phone always says 'The software is upto date and no update is necessary!" really?
I called at&t again w/o much success. Then I called Motorola and was told that the phone is running a strange unofficial (really, again?) android version that they cannot help either.
I did confirm the phone is not rooted.
Now, I have a beautiful looking phone that i cannot use. I am not familiar with rooting and all sorta things and can you please help me so i can use this phone?
Thanks a ton.
Click to expand...
Click to collapse
root the phone and remove all the att blotware...
doing this will remove att address book serch.....