Related
HEEEEEEEELP PLEAAASE, i tried to go back to 2.3.5 then my phone doesnt boooooot, i dont know what todo, im desperated, my phone is new and ithas no warranty, i'm stuck with a 650 u$ rock, how to proceeed? what to do? don't know how to use fastboot and cant get it working with command promp in windows.. oh no.. :crying::crying::crying:
Calm down, dude.
Sent from my Atari Falcon030
You need to give more information. How did you attempt to FXZ to 2.3.5? It doesn't boot, so you soft bricked your phone. Why were you trying to FXZ? What system version is your phone? The more details you give, the better we can help. Doesn't do much good to be so overly animated, we're all adults here. I think...
Sent from my Atari Falcon030
Hi,
Were you on 2.3.6 or ICS?
CG errors are not too bad, just softbrick IMO.
If you were on 2.3.6, please find the first sticky post (beginner's guide) for details about how to flash fastboot. You need to follow the instructions to replace files in 2.3.5FXZ.
If you were on ICS, please hang on and wait for someone more experienced to reply.
Read the sticky notes first. Thee noob one and then the others, there should be a fix for your problem. If you have a question ask right away!
jerrycrystal said:
Hi,
Were you on 2.3.6 or ICS?
CG errors are not too bad, just softbrick IMO.
If you were on 2.3.6, please find the first sticky post (beginner's guide) for details about how to flash fastboot. You need to follow the instructions to replace files in 2.3.5FXZ.
If you were on ICS, please hang on and wait for someone more experienced to reply.
Click to expand...
Click to collapse
If he was on the ICS leak, he needs to put the phone back in the box and not do or post anything until the devs figure out the solution. Let's keep the forum clean.
Sent from my Atari Falcon030
i was on 2.3.6 from AT&T (The original One) then i use this:
http://forum.xda-developers.com/showthread.php?t=1539167
Then my phone doesnt boot! Just Failure boot in the Bootloader! :'(
Downloader the full SBF and tried using RSD boot gives FAILURE in step 6
i downloaded moto fastboot and the boot.img
but even being in fastboot mode i cant use any commands from fastboot, i execute it and suddenly closes, tried to execute it from CMD, and just shows the commands, but cant use them..
ITS ALIVE!!!!!!!!!!! THAAAAAAAANKS EVERYONE, can tell how happy i'm because of you to take care of people here. I replaced some files to the 2.3.5 firmware then flashed with rsd lite, works great!!!!!!
Very happy for you. Enjoy but take care and read alot before doing any thing
Sent from my MB865 using xda app-developers app
maxiordoqui said:
ITS ALIVE!!!!!!!!!!! THAAAAAAAANKS EVERYONE, can tell how happy i'm because of you to take care of people here. I replaced some files to the 2.3.5 firmware then flashed with rsd lite, works great!!!!!!
Click to expand...
Click to collapse
Felicitaciones, che!
Im guessing i kust bricked my phone but thought id ask for help. I tried my luck at flashing a ROM for my first time on my dinc2 and now its stuck,i guess on the boot..it just says htc and wont do anything. Anyhelp please!!
also
patfussy said:
Im guessing i kust bricked my phone but thought id ask for help. I tried my luck at flashing a ROM for my first time on my dinc2 and now its stuck,i guess on the boot..it just says htc and wont do anything. Anyhelp please!!
Click to expand...
Click to collapse
I created a backup before hand but that does little good when i cant get to recovery,please please anyone gimme some good news
patfussy said:
I created a backup before hand but that does little good when i cant get to recovery,please please anyone gimme some good news
Click to expand...
Click to collapse
Good news: your phone is not bricked, as it's responding, it's just stuck on boot, so there's something wrong with the ROM you flashed (maybe a wrong one?).
Have you tried taking your battery off, waiting for a while, put in back in, and then tried to enter CVM? I'd like to help you further, but I don't own that phone.
Also check the Q&A and General threads at http://forum.xda-developers.com/forumdisplay.php?f=1138 for a similar problem.
patfussy said:
Im guessing i kust bricked my phone but thought id ask for help. I tried my luck at flashing a ROM for my first time on my dinc2 and now its stuck,i guess on the boot..it just says htc and wont do anything. Anyhelp please!!
Click to expand...
Click to collapse
How did you unlock your phone? Did you use HTCDev?
yes
SimonTS said:
How did you unlock your phone? Did you use HTCDev?
Click to expand...
Click to collapse
Yes i used htcdev before i new what i was doing, well i still dont really.I wasnt able to achieve s-off because i kept getting errors while trying to downgrade, but somehow was able to get root. I used a rom that i got from the dinc2 forums i believe it was the blackice rom. I cant get this phone to do anything but read htc and turn off by hold volume up/down and power, but then it turns back on by itself. Any ideas guys? Im freakin out
patfussy said:
Yes i used htcdev before i new what i was doing, well i still dont really.I wasnt able to achieve s-off because i kept getting errors while trying to downgrade, but somehow was able to get root. I used a rom that i got from the dinc2 forums i believe it was the blackice rom. I cant get this phone to do anything but read htc and turn off by hold volume up/down and power, but then it turns back on by itself. Any ideas guys? Im freakin out
Click to expand...
Click to collapse
If you used HTCDev to unlock your phone then you need to flash the boot.img (kernel) every time you install a new custom ROM. Check in the threads for full instructions on it.
i was ....
SimonTS said:
If you used HTCDev to unlock your phone then you need to flash the boot.img (kernel) every time you install a new custom ROM. Check in the threads for full instructions on it.
Click to expand...
Click to collapse
I was going to do that after i flashed the rom, but as soon as i did it rebooted my phone to where i am now. I just need to get this thing back to the astboot menu so i can do a recovery....anyone know how i can do that? Thanks for your speedy replies thus far though.
patfussy said:
I was going to do that after i flashed the rom, but as soon as i did it rebooted my phone to where i am now. I just need to get this thing back to the astboot menu so i can do a recovery....anyone know how i can do that? Thanks for your speedy replies thus far though.
Click to expand...
Click to collapse
Use ADB to get yourself back.
elaborate
SimonTS said:
Use ADB to get yourself back.
Click to expand...
Click to collapse
Can use please elaborate. I have sdk downloaded but im lost on how to use it. When i try to open adb a command prompt opens but then just shuts. Thank you
patfussy said:
Can use please elaborate. I have sdk downloaded but im lost on how to use it. When i try to open adb a command prompt opens but then just shuts. Thank you
Click to expand...
Click to collapse
Thank you,got it. I tried multiple times to get to recovery but it kept saying device not found. I removed battery and powered up and hit hit adb reboot recovery right away and it went. Thank you again. Ill be doing a bit more research before i try this again. Any ideas about getting this thing downgraded so i can get s-off? I keep getting errors that the files arent found but i have everything downloaded that i need.
I just tried to flash Jellywiz for the first time. I forgot to unlock the bootloader prior to flashing the rom. I know.........So Stupid.
Anyway. I've tried the odin trick but my phone just has the yellow triangle with the message that the system software in not authorized by VZE. I can't boot into recovery to restore my backup. Odin doesn't seem to work. I'm trying to follow the instructions http://forum.xda-developers.com/showthread.php?t=1840030 But I'm not getting the "PASS" message.
Please help... I'm freaking out.
Are you booting into download mode before connecting to Odin?
Oh, no I wasn't. I'm now going through the Odin process in Download mode. Thanks for the tip. Hope this works
dbow32 said:
Oh, no I wasn't. I'm now going through the Odin process in Download mode. Thanks for the tip. Hope this works
Click to expand...
Click to collapse
folks...i will say it again, you dont need to use puremotives guide to recover in this situation. just flash a stock rom in odin and be done. there is no need to flash bootchains...use section 6 of my guide, then if that does not work use puremotives guide. not trying to take anything away from pures great writeup, but its intended for devices that are actually soft bricked. i only recomend flashing bootchains if absolutely necessary because if anything fails during the flash, you get a hardbrick....then its jtag time!
droidstyle said:
folks...i will say it again, you dont need to use puremotives guide to recover in this situation. just flash a stock rom in odin and be done. there is no need to flash bootchains...use section 6 of my guide, then if that does not work use puremotives guide. not trying to take anything away from pures great writeup, but its intended for devices that are actually soft bricked. i only recomend flashing bootchains if absolutely necessary because if anything fails during the flash, you get a hardbrick....then its jtag time!
Click to expand...
Click to collapse
Ok, I'll try that. Thanks for every ones help. I'll let you guys know if it works.
I'm up and running. Thank you all so much... especially droidstyle for the tutorial. I tried looking for a "Donate" button on the tutorial but couldn't find one. I'll keep looking and send some cash your way. Again, thank you VERY much.
Dave
dbow32 said:
I'm up and running. Thank you all so much... especially droidstyle for the tutorial. I tried looking for a "Donate" button on the tutorial but couldn't find one. I'll keep looking and send some cash your way. Again, thank you VERY much.
Dave
Click to expand...
Click to collapse
donate link up! i never really thought to put up a link, but actually there have been quite a few folks wanting to make a donations...thx and glad your back up and running!
Droidstyle what are boot chains? I came from sprint and never saw them before and a Google search doesn't give an answer. Could u please shed some light on it for me. Thanks bro
Sent from my SCH-I535 using xda premium
musclehead84 said:
Droidstyle what are boot chains? I came from sprint and never saw them before and a Google search doesn't give an answer. Could u please shed some light on it for me. Thanks bro
Sent from my SCH-I535 using xda premium
Click to expand...
Click to collapse
bootchains are the order of operations for the boot process(aka bootloader). some folks have had thier devices emmc internal memory get corrupted during a cwm session causing the system permissions to read only. since no data can be written on boot, your device is stuck in a bootloop. reflashing the bootchain followed by the stock rom restores the proper boot sequence and read/write permissions allowing the device to boot. the kicker is you want to make sure nothing goes wrong when flashing a bootchain or its brick city. hopefully this makes sense lol
droidstyle said:
bootchains are the order of operations for the boot process(aka bootloader). some folks have had thier devices emmc internal memory get corrupted during a cwm session causing the system permissions to read only. since no data can be written on boot, your device is stuck in a bootloop. reflashing the bootchain followed by the stock rom restores the proper boot sequence and read/write permissions allowing the device to boot. the kicker is you want to make sure nothing goes wrong when flashing a bootchain or its brick city. hopefully this makes sense lol
Click to expand...
Click to collapse
Yes it does. Thank you so much. I have never seen these used before so it was new to me. Thanks again.
Sent from my SCH-I535 using xda premium
I wonder how many times droidsytles howto has saved people, im sure its in the thousands, thanxs droidstyle! I known it saved me a couple times
Sent from my SCH-I535 using xda app-developers app
Well I've been having this problem for a while, my phone goes into a bootloop whenever I restart it. It shows the white HTC screen, goes black, then the white HTC screen...over and over again.
The only way I have found to get it to boot up normally is when I connect a USB cable to it
But if I remove the cable and reboot, I get the same problem again.
Any ideas? Has anyone had this happen before??
That may be a Hardware issue. They easiest way I can think of is to RUU back to Stock, and Reformat the SD Card. If it still does it, then it may be a Hardware related issue.
CNexus said:
Well I've been having this problem for a while, my phone goes into a bootloop whenever I restart it. It shows the white HTC screen, goes black, then the white HTC screen...over and over again.
The only way I have found to get it to boot up normally is when I connect a USB cable to it
But if I remove the cable and reboot, I get the same problem again.
Any ideas? Has anyone had this happen before??
Click to expand...
Click to collapse
I've had that happen a couple times but it was because it was something I did/flashed, I agree with prboy, ruu back and format memory card (save your stuff to the computer first)- I've forgotten to save first a couple times
prboy1969 said:
That may be a Hardware issue. They easiest way I can think of is to RUU back to Stock, and Reformat the SD Card. If it still does it, then it may be a Hardware related issue.
Click to expand...
Click to collapse
I'll definitely try that, I don't know if this shed anymore light on it but my sdcard doesn't mount through my phone anymore either...happened around the same time as the restarting thing
But I'll tr and see what happens, if not I'll just take it in to sprint, I know it can't be something I flashed, I've been on stock for a while because of my utility
Sent from my PG06100 using xda premium
I would start by Formatting the SD Card. Then if that doesn't resolve issue. Format the SD Card again, and then RUU. If at that point the issue is still present, it's time to take it in to Sprint. Out of curiosity, are you using a custom Kernel ? Reason I ask is that I've run across something slightly similar after Flashing an Experimental Kernel Dirty. Meaning I did not wipe Cache, or Dalvik before Flashing. Mind you this was a very long time ago, in my HERO days. But I seem to remember it acting sort of like the symptoms you described.
prboy1969 said:
I would start by Formatting the SD Card. Then if that doesn't resolve issue. Format the SD Card again, and then RUU. If at that point the issue is still present, it's time to take it in to Sprint. Out of curiosity, are you using a custom Kernel ? Reason I ask is that I've run across something slightly similar after Flashing an Experimental Kernel Dirty. Meaning I did not wipe Cache, or Dalvik before Flashing. Mind you this was a very long time ago, in my HERO days. But I seem to remember it acting sort of like the symptoms you described.
Click to expand...
Click to collapse
Nope, no custom anything. 100% stock 2.2 with temproot, but since I can't reboot its really permroot lol
Sent from my PG06100 using xda premium
Then I would defiantly try what I stated above. See if it can resolve the issue.
prboy1969 said:
Then I would defiantly try what I stated above. See if it can resolve the issue.
Click to expand...
Click to collapse
Will do
Sent from my PG06100 using xda premium
Getting the same issues. I've tried ruu through both the exe and pg06 img. Tried factory reset with no luck, in the stock recovery ive wiped everything with no luck also. It's read by fastboot and i can issue commands, flashing through fastboot just gives me a sig verification failure. I've tried every method i've found and none have worked. Happened after downgrading to 2.2. I got temproot and went to permroot to go into this. I used htcdev to unlock the bootloader and it was successful. I cant access my sdcard since flashing the 2.2 ruu reverted it to stock and i cant get into the system to disk drive it. It boots for about 3 seconds then reboots. If any of the mmcblk... commands were mistyped or something was done wrong, how would i go about checking or fixing them if thats even possible? Any help or leads would be amazing.
SPEEDY XF SHIP S-ON
HBOOT-0.93.0001
RADIO-1.07.00.1129
eMMC-boot
KiDxNinja said:
Getting the same issues. I've tried ruu through both the exe and pg06 img. Tried factory reset with no luck, in the stock recovery ive wiped everything with no luck also. It's read by fastboot and i can issue commands, flashing through fastboot just gives me a sig verification failure. I've tried every method i've found and none have worked. Happened after downgrading to 2.2. I got temproot and went to permroot to go into this. I used htcdev to unlock the bootloader and it was successful. I cant access my sdcard since flashing the 2.2 ruu reverted it to stock and i cant get into the system to disk drive it. It boots for about 3 seconds then reboots. If any of the mmcblk... commands were mistyped or something was done wrong, how would i go about checking or fixing them if thats even possible? Any help or leads would be amazing.
SPEEDY XF SHIP S-ON
HBOOT-0.93.0001
RADIO-1.07.00.1129
eMMC-boot
Click to expand...
Click to collapse
So at this point your just trying to run the RUU ? Or do you still want to achieve Root ?
prboy1969 said:
So at this point your just trying to run the RUU ? Or do you still want to achieve Root ?
Click to expand...
Click to collapse
I had temp root and in between gaining perm root this happened. Root does me no good if I'm boot looped and can't even adb. I'm trying to get the phone to boot. Or read through adb. I can't fast boot any of the partitions either so I'm basically stuck in limbo
KiDxNinja said:
I had temp root and in between gaining perm root this happened. Root does me no good if I'm boot looped and can't even adb. I'm trying to get the phone to boot. Or read through adb. I can't fast boot any of the partitions either so I'm basically stuck in limbo
Click to expand...
Click to collapse
Have you tried booting it up while connected to a USB cord? That works for me because my phone will otherwise go into a bootloop whenever I restart it
Sent from my PG06100 using xda premium
KiDxNinja said:
I had temp root and in between gaining perm root this happened. Root does me no good if I'm boot looped and can't even adb. I'm trying to get the phone to boot. Or read through adb. I can't fast boot any of the partitions either so I'm basically stuck in limbo
Click to expand...
Click to collapse
Are you trying the PG06IMG , or the RUU.exe ? Have you tried doing the 2.2 RUU.exe through Fastboot ?
prboy1969 said:
Are you trying the PG06IMG , or the RUU.exe ? Have you tried doing the 2.2 RUU.exe through Fastboot ?
Click to expand...
Click to collapse
Yes and Yes, read my first post -_-
KiDxNinja said:
Yes and Yes, read my first post -_-
Click to expand...
Click to collapse
Must have missed that somehow. My bad . But on to the issue at hand. I'm wondering if maybe your SD Card went wonky. I would remove the SD Card, format it. Load the PG06IMG back onto the Card, reinstall. Then try to flash it. Of course backup your card to the PC first.
TEAM MiK
MikROMs Since 3/13/11
prboy1969 said:
Must have missed that somehow. My bad . But on to the issue at hand. I'm wondering if maybe your SD Card went wonky. I would remove the SD Card, format it. Load the PG06IMG back onto the Card, reinstall. Then try to flash it. Of course backup your card to the PC first.
TEAM MiK
MikROMs Since 3/13/11
Click to expand...
Click to collapse
Tried this with same result. flashing through hboot works for the 2.2 ruu, but im still stuck in the bootloop.
I also tried flashing a custom recovery via hboot, but the pgo6img loads then doesnt ask me if i want to update or not. I have literally no idea where to go or what to check.
KiDxNinja said:
Tried this with same result. flashing through hboot works for the 2.2 ruu, but im still stuck in the bootloop.
I also tried flashing a custom recovery via hboot, but the pgo6img loads then doesnt ask me if i want to update or not. I have literally no idea where to go or what to check.
Click to expand...
Click to collapse
Its not pgo6img. Its PG06IMG.zip. its a zero before the 6 not the letter "o". Idk if capitalized letters matter or not but I always capitalize all the letters
Sent from my EVO using Tapatalk 2
YoungCorruptionV2.0 said:
Its not pgo6img. Its PG06IMG.zip. its a zero before the 6 not the letter "o". Idk if capitalized letters matter or not but I always capitalize all the letters
Sent from my EVO using Tapatalk 2
Click to expand...
Click to collapse
I was just about to say that, if the name of the file isn't correct, the bootloader won't pick it up.
Yeah i know, i was just too lazy to type it out. I know what im doing as far as general modding and flashing, and I actually managed to fix it. I'm not positive how but I used the unroot back to stock guide for the stock locked bootloader. After flashing it through hboot I tried the 2.3.4 RUU. Still bootlooped but I was at stock with locked bootloader. I then used htcdev to reunlock the bootloader and I was then able to flash partitions through fastboot. I flashed cwm and was able to adb through it. I basically just reran through the rooting phase and gained temproot. From here I redid the steps to engineer hboot and finally received s-off. After this it booted normally. I might be leaving steps out but if anyone needs specifics, just pm me and maybe I can figure it out again for you.
Sent from my PG06100 using Tapatalk 2
help with boot loop loop loop
hi
someone can help whit phone?
in summer i restart phone and it stuck in loop htc logo in white over and over agen
till batrtery go down and nothing happen when trying to charg only led was flashing
no to long ago i plug to charger ad phone torn back on, sd card was out
I turn it off put sd card back on phone turn back on, try to software update one and second time it go back to loop agen=[
rand battery down agen and it does not torn back on, to hboot
well it does if i play whit it holding power bottom volume down longer time
speed xe ship s-on
hboot-0.99.0001
radio-1.08.01.0111
emmc-boot
can some one give me step by step instruction?
Hey guys,
I'm somewhat new to Jailbreaking and Rooting Android Devices. I was working on my rooted 4.0.4 Atrix 2 today and wanted to install JellyBean. My first attempt I used the RSD lite program to install it. Found it I was using the wrong ROM (I'm a noob) and was stuck at the bootloader. Then, I used Wonderful RSD lite to use my fxz I downloaded. I'm pretty sure i downloaded the wrong one, so It flashed and got to step 5 and then gave me a fail. Now the device won't power on and it's either because I went from a soft brick to a hard brick. Or, the battery died. i have the original charging which i'm doing right now. Please help I'm scared ****less.
ITGuy420 said:
Hey guys,
I'm somewhat new to Jailbreaking and Rooting Android Devices. I was working on my rooted 4.0.4 Atrix 2 today and wanted to install JellyBean. My first attempt I used the RSD lite program to install it. Found it I was using the wrong ROM (I'm a noob) and was stuck at the bootloader. Then, I used Wonderful RSD lite to use my fxz I downloaded. I'm pretty sure i downloaded the wrong one, so It flashed and got to step 5 and then gave me a fail. Now the device won't power on and it's either because I went from a soft brick to a hard brick. Or, the battery died. i have the original charging which i'm doing right now. Please help I'm scared ****less.
Click to expand...
Click to collapse
If you can still get into fastboot mode, then it isn't hardbricked yet. What model is your phone? If it is AT&T branded, DO NOT FLASH IT!! It is for Asian retail, and international phones only.
Sent from this thing.
1BadWolf said:
If you can still get into fastboot mode, then it isn't hardbricked yet. What model is your phone? If it is AT&T branded, DO NOT FLASH IT!! It is for Asian retail, and international phones only.
Sent from this thing.
Click to expand...
Click to collapse
Yeah, I was able to get it into Fastboot. When I was able to (Past Tense) I tried re-flashing it with RSDLite using a FXZ. But, I believe it was the wrong one and It attempted to flash and got stuck at 5/23 which was the bootloader. And now it won't boot, but I do believe it charges. Just won't turn on at all. It is under warranty
ITGuy420 said:
Yeah, I was able to get it into Fastboot. When I was able to (Past Tense) I tried re-flashing it with RSDLite using a FXZ. But, I believe it was the wrong one and It attempted to flash and got stuck at 5/23 which was the bootloader. And now it won't boot, but I do believe it charges. Just won't turn on at all. It is under warranty
Click to expand...
Click to collapse
I sent you a pm
Sent from this thing.
1BadWolf said:
I sent you a pm
Sent from this thing.
Click to expand...
Click to collapse
Thanks. I replied
Maybe you just suck at installing ROMs and should hold the jumpers yourself.
Not ITguy420 said:
Maybe you just suck at installing ROMs and should hold the jumpers yourself.
Click to expand...
Click to collapse
I hate to say this, it looks like you have hard bricked your A2. If it is still under warranty, return it to the vendor and play dumb. Do not tell your vendor that you tried to do a fxz. Good luck.