hi,
my omniaII assumes that a headset is always plugged into the mobile, therefore it doesn't play music or even doesn't support answering a call simply, unless I connect a headset and listen or speak by that!!! I've tried to fix it by referring to a good serviceman, but he said that the issue is about motherboard, and he couldn't solve it for me! now I wonder if I can solve this in a software form before finding another serviceman out of my city!!
I mean do u know or even is it possible to change settings or registry values of system to play music from both of headset and outer speaker, simultaneously??if yes,How can i do this?
I vitally need this ans,tnx in advance for ur answers.
Related
Hi all, i have a problem after upgrade my SPV C600 from WM5 to WM6.
after finish the upgrading, i could play my windows media player and could make a phone call without any problem.
after a while after i plug in my earpice to listen music, it went good as well.
after plug it off (earpiece not attached), when i play windows media player, i cant hear anything and i try to make a phone call also the same, no sounds came out from speaker and from loudspeaker as well. but when i plug in the earpice everything goes smoothly, meaning that i can listen music and communicate with others when make a phone call.
before that i tried to ensure whether i face the software or hardware problem by setting the ringtone (start->setting->sound). but the sound could come out from the speaker.
after that i guess that the speaker (hardware) has no problem.
as to play windows media player and setting ringtone are using the same speaker.
can anyone tell me whats happening with my phone?
i believe that it is software related problem.
thanks in advance
my advise is to reboot your phone at me this works...
Profy_X said:
my advise is to reboot your phone at me this works...
Click to expand...
Click to collapse
i have tried to reboot and hard reset as well
but i can only listen music and make a phone call when i use my earpice
Please state which ROM you are using, we recommend Andot's PEE
I too have this exact problem any solution other than hard reset - dont need the pain of downloading resinstalling all my stuff - especially if its going to happen again.
Si
Tornado mic and speaker for phone not working
It rings and plays sounds but it appears that the hardware microswitch that sets it to wired-headset mode is stuck. I cannot set it back. Also: it switched into this mode when I rebooted (soft). I did not add or remove a 2.5mm jack. Is there a registry setting to override the microswitch sensor and keep it out of headset mode?
Hi, this is my first post and hope helpfull everybody, possibly i was the same problem over ALL ROM (wm6 & wm6.1), searching for any solution (my specific trouble was that if i wanna listen music over any player: ( a.k.a windows media, pocket player, etc), i dont had a normal sound from the speaker, the sound was distorsioned, low... horrible, the only solution was insert the plug from the headset and out , but, power off the phone and... again, sucks really ), i return to a Wm5 Rom (imate) and solve the problem, but, tired for the slow performance of WM5, search for other rom, sacrify the music listen ( but i have a good mp3 player...), and, the same problem.
I found in the web (no remember the page) that the SRS plug-in anytimes cause troubles with the sound output, i try to install any ROM WITHOUT this complement, the ROM from Rickywatt Tornado Neo/shadow no have this plugin, install and ...Eureka, no more the issue, follow my instint, i install the SRS plug in, reboot and... the fuc%$& problem, hard reset and the phone witout the problem... conclusion, the SRS was the monster.
You can try this "method", most of rom carry or include from the "kitchen" this SRS dll, but installing the rom from Rickywatt (fast, clean... beautiful, only without the spanish lang, but, nothing is perfect...), can solve the issue, for me ,cors, i dont know for you (my phone is a HTC sda).
For the mic, really i dont have idea , any bad registry, entry, etc :-(, i never have this issue, good luck...
Greetings from colombia (sorry for my poor English)
mzzw said:
It rings and plays sounds but it appears that the hardware microswitch that sets it to wired-headset mode is stuck. I cannot set it back. Also: it switched into this mode when I rebooted (soft). I did not add or remove a 2.5mm jack. Is there a registry setting to override the micro switch sensor and keep it out of headset mode?
Click to expand...
Click to collapse
That's not controlled by software. Try plugging and unplugging a headset several times, twisting it around to clean the contacts. It should clean and close contact for built in speaker to work again. Think of a circuit. If its closed, you have built in speaker. If it opens and you have a headset pluged in, then audio flows thru the headset. It won't go back to speaker until that circuit is closed again. Its mecanical, not software, so you can't do anything with registry.
mzzw said:
It rings and plays sounds but it appears that the hardware microswitch that sets it to wired-headset mode is stuck. I cannot set it back. Also: it switched into this mode when I rebooted (soft). I did not add or remove a 2.5mm jack. Is there a registry setting to override the microswitch sensor and keep it out of headset mode?
Click to expand...
Click to collapse
the same for me
well
the only fix i got was to disasemble and remove the swithch leaving its contacts as exposed as possible, the soldered a wire between 2 of the 3 connectors, hey presto all working, headset hole then filled with glue from glue gun
very rough but it worked....
as an after thought though see if youve updated your radio software, stranger things have happened if youve been into flashing with 3rd party roms
sisniper said:
well
the only fix i got was to disasemble and remove the swithch leaving its contacts as exposed as possible, the soldered a wire between 2 of the 3 connectors, hey presto all working, headset hole then filled with glue from glue gun
very rough but it worked....
as an after thought though see if youve updated your radio software, stranger things have happened if youve been into flashing with 3rd party roms
Click to expand...
Click to collapse
Thank you!!! The only problem that i've now it's buy a torch :S
Hi,
Before I start creating an application that would bypass the headset earphone jack switch(the one the activates once you insert a headset), I would like to know or find out first, if it is programatically possilble to bypass this manually by a registry setting or an application. If yes, kindly advice as to where I should start.
I found similar application while searching for solution to
fix sound problem while using VOIP on Titan/Mogul
and other HTC devices. It was writen for ETEN but
to my disapoitment doesnt work on the Titan
http://www.eten-users.eu/lofiversion/index.php/t8854.html
lifeisfun said:
I found similar application while searching for solution to
fix sound problem while using VOIP on Titan/Mogul
and other HTC devices. It was writen for ETEN but
to my disapoitment doesnt work on the Titan
http://www.eten-users.eu/lofiversion/index.php/t8854.html
Click to expand...
Click to collapse
tnx, this application works w/ my device but i don't see the capability toggle the headset profile.
up up up...
up up up...
any takers or brave soul out there?
Hi,
As I understand it the HTC models that do have an FM Radio build in can switch the FM Radio output the the main speaker even while the headset is plugged in. It needs to be pluggen in; it's theis antenne. So my guess is that it must be possible. I myself would be very interested in such a program.
Good luck, hope you'll sucseed,
Cheers,
Cactus
le_cactus said:
Hi,
As I understand it the HTC models that do have an FM Radio build in can switch the FM Radio output the the main speaker even while the headset is plugged in. It needs to be pluggen in; it's theis antenne. So my guess is that it must be possible. I myself would be very interested in such a program.
Good luck, hope you'll sucseed,
Cheers,
Cactus
Click to expand...
Click to collapse
yup
anybody out there who could point me in the right direction? where should i start...?
still no luck on this - pls help, even just to point us in the right direction
i've search desperately but no luck i know it is possible; first because the built fm radio application can stream through both speaker and earphone. second, i run into a bluetooth app that can divert/stream audio(not only calls). this leads me to conclude, that is it possible. i just don't have infos i need to create one. i've read many msdn articles, tutorials but still no luck that is specific.
please to all the programmers out there, help us. this is just a very simple app and it would hurt 5mins of your time just to point me in the right direction. I am most willing to view/review servelar even tons of source codes that is very similar or close to the solution we are looking for, you just have to share it to us. thank you. i hope somebody out there could help us.
adomila said:
Hi,
Before I start creating an application that would bypass the headset earphone jack switch(the one the activates once you insert a headset), I would like to know or find out first, if it is programatically possilble to bypass this manually by a registry setting or an application. If yes, kindly advice as to where I should start.
Click to expand...
Click to collapse
In the registry:
HKLM/System/State/Hardware
change the key "Headset" 0 to 1.
but the headphones works like antenna and you dont hear any radio station.
ryomahino said:
In the registry:
HKLM/System/State/Hardware
change the key "Headset" 0 to 1.
but the headphones works like antenna and you dont hear any radio station.
Click to expand...
Click to collapse
thank you ryomahino, for taking time to reply. i'm already aware of this registry work around and have done this already, but the hardware switch still persists. aslo sometimes or when you reset, it does not persists. so the only solution is having at switch, that will run the audio both on the headset and speaker, pretty much like what the fm radio does, but must also work on calls, together with the microphone. im pretty sure this is very much simple for those experience programmers out there. if we put together that fm radio and bluetooth audio capability then this would work. just need a little push/help as to where start. or if I could look into those source codes then we are ready to go...
technical question on fm radio app
Gurus/programmers/anybody,
Does anybody know, or at the least, give me an idea, as to how the o2 xda atom build in fm radio application, programmatically (technically) toggle from stereo headset to speaker? Just even, point me to the right direction, pls, I'll read tons of infos, if need be...
Had same problem on my Raphael, here is what I did:
http://forum.xda-developers.com/showthread.php?t=444581
Maybe this or similar would help you as a workaround too.....
this app would be great for htc touch hd!
i use normal 3,5inch headphones to listen to music but when i do a call i always have to plug them out! would be nice to have an app that automatically disables headset when you are in a call so you can have your headphones attached but still talk with the phone!
Moved to Q&A section
I tried to do it my self but i failed, thought i'd put it as a challenge for someone if its possible or maybe if someone has already done it and maybe willing to share?
I've bought Logitech H600 headphones and it comes with microphone and a Bluetooth usb connector.
The problem i ran into is weird but i bet many of us would have gone through it before or probably somewhere been fixed but as i am not aware of where about thus thought to make a thread here to share with all.
Microphone & headphones works with computer and doesn't have any problem in making calls through skype and other apps using computer.
The real problem is with the phone..
1: The headset works perfectly it does connect with Phone and plays MEDIA files through headphones without any problem.
BUT!
2: it doesn't direct calls even though it has microphone, where i dont understand why would it work on PC and not on phone even though it does have headphones and microphone, is it possible to work things out for this like writing small script or an app to fix this issue some how?
I'd love to know if any of you guys have ran into this and have problem with this and dont want to lose the beloved headset...
Cheers in advance for all those who reply and try to resolve this issue.
still looking.
Does anybody knows where the primary microphone is located?People can`t hear me well, it`s not a software problem so i decided to change the mic, but i can`t find it)
Sag3aTa said:
Does anybody knows where the primary microphone is located?People can`t hear me well, it`s not a software problem so i decided to change the mic, but i can`t find it)
Click to expand...
Click to collapse
Hi,
Same problem (CyanogenMod 12.1 official). People always says that there doesn't ear me well. So I decide to check if the microphone is clean and cant locate it.
With the application oscilloscope I identify the 'call microphone' as the 'right speaker'.
Also this application is able to switch to the secondary microphone (located near the audio jack). I clean it up and the people ear me a bit better.
Tell me I you found something relevant please.
Hi you all, I have a non common bluetooth problem. My S6 is running Xtrestolite with android 6.0. My phone can connect BT to my cars, my earset and my soundbar to play music and it work well even on my earset. BUT, nothing for voice call, the call connect and silence for everyone. There is no voice at all, but BT is connected, and all infos on my cars radio like timer, mute and others work well ( okay mute cannot be more muted ). So I tried 1/8 headset for music it works, did not try yet one with a mic, but I'll do it ASAP. I tried to reprogram with odin default OS, with factory settings, and that way force all components to be re-write ( Bootloader, Radio , etc ), issue still present !!! Try to clean micro usb connector, nothing !! Try to clean audio jack, but wasn't really sure if it was well cleaned.
Do anybody here have an idea of what I could try, test or do to eliminates possibilities ??
I am thinking that maybe some corosion could be in the audiojack, somewhere and let the phone think that there is an audio jack connected, and then sent the voice to it...but how it could be tested before to try to open the phone to clean it properly and risk to damaged the LCD ???
Thank a lot for all of your advices