Database Info

[Q] stuck on odin set up conection I am brick

hi there
After flashing a stock room I got a boot bucle, so i did reset data factory, cache partition and dalvich cache, restart and still had a boot bucle, so I enter in dowload mode again started odin and reflashed stok room 2.3.4 again; in the midle of the process i got an odin FAIL on red square !!!! after that fit doesnt even start, is dead.
I am still able to enter "dowload mode" by holding all three bottons (volume up/down. home and power) but when i tray to flash someting odin get stuck on <1> setup conection .....
any idea what i can do??

Try rebooting the PC and changing the USB port!...Hope it works!
galaxy fit + CM7.2 (2.3.7) + 801Mhz

neil.richard said:
Try rebooting the PC and changing the USB port!...Hope it works!
galaxy fit + CM7.2 (2.3.7) + 801Mhz
Click to expand...
Click to collapse
I have been restared many times and tryed every single usb port and doest work, but thanks for anwser
any body else, any idea ??

Try it from another pc, if possible. Might be internal hub problem of pc. At least you could exclude this after it.
Sent from my GT-S5570 using XDA App

Rodsengard said:
Try it from another pc, if possible. Might be internal hub problem of pc. At least you could exclude this after it.
Sent from my GT-S5570 using XDA App
Click to expand...
Click to collapse
i al ready try on 3 diferent pc`s and every port on them and still the same. any advice is welcome

Okay, you may try flashing creed's 1.3 using odin and then flash v1.5 over it...
Creed' s rom is any day better than the stock rom...
And if you want the stock rom only, you could redownload all your files...maybe that will help...

mefrodo said:
I have been restared many times and tryed every single usb port and doest work, but thanks for anwser
any body else, any idea ??
Click to expand...
Click to collapse
Can u go in Recovery mode?...if yes then u can either flash Creed's ROM or CM7!...
galaxy fit + CM7.2 (2.3.7) + 801Mhz

neil.richard said:
Can u go in Recovery mode?...if yes then u can either flash Creed's ROM or CM7!...
galaxy fit + CM7.2 (2.3.7) + 801Mhz
Click to expand...
Click to collapse
Odin does recognize the phone but, when i try ti flash any room it gets stuck on "set up conection..." after 45 minutes still same status.
help please!!!!

mefrodo said:
Odin does recognize the phone but, when i try ti flash any room it gets stuck on "set up conection..." after 45 minutes still same status.
help please!!!!
Click to expand...
Click to collapse
Okay, now some basic stuff...
Do you have a galaxy fit s5670??
And are you trying to flash galaxy fit's software only na???
And have tried taking out the battery, putting it back and restarting your phone??
also, while your phone is switched off, and you try to charge it, does the big battery icon come up???

a.cid said:
Okay, now some basic stuff...
Do you have a galaxy fit s5670??
And are you trying to flash galaxy fit's software only na???
And have tried taking out the battery, putting it back and restarting your phone??
also, while your phone is switched off, and you try to charge it, does the big battery icon come up???
Click to expand...
Click to collapse
thanks for for you answer
I have S5670
I am tryng to flash a stock room for s5670
I got nothing on screen, not even pulged
only way that odin recognize the phone is by holding volume up/down home and power, when press start button on odin it get stuck on firs step: "set up conection ... " and nothings happen after that
any idea is welcome ill try everyting

mefrodo said:
thanks for for you answer
I have S5670
I am tryng to flash a stock room for s5670
I got nothing on screen, not even pulged
only way that odin recognize the phone is by holding volume up/down home and power, when press start button on odin it get stuck on firs step: "set up conection ... " and nothings happen after that
any idea is welcome ill try everyting
Click to expand...
Click to collapse
The fact that odin recognizes your phone means that it isn't a hard brick..
If all else fails, try asking samsung for a replacement..
Say you left the phone to charge overnight and now it rrefuses to switch on...however, this should be your last resort...
Before that, can you list in detail, all the steps you did...like which odin, which ops etc...
And was your device able to connect to ur pc before you tried this, as in all drivers were present??
Also, maybe you can try flashing cwm from this:
http://forum.xda-developers.com/showthread.php?t=1352518

a.cid said:
The fact that odin recognizes your phone means that it isn't a hard brick..
If all else fails, try asking samsung for a replacement..
Say you left the phone to charge overnight and now it rrefuses to switch on...however, this should be your last resort...
Before that, can you list in detail, all the steps you did...like which odin, which ops etc...
And was your device able to connect to ur pc before you tried this, as in all drivers were present??
Also, maybe you can try flashing cwm from this:
http://forum.xda-developers.com/showthread.php?t=1352518
Click to expand...
Click to collapse
thanks for your answer, I will be writing all details at night due to I am working rigth now, also I`ll check the link a soon as I can. thanks in advance.

If the conection problem is... Before u usw odin plz make sure that u have instal lates kies on your pc/laptop...have u made it...and than if u usw windows xp plz make sure went u instal kies there are dotnet fix v 3.5 or 4 on your pc....usually kies will download it for u.....when u install it
I've try to flash frm my pc that use windows xp sp2 and doesnt have internet conection and i use kies from the cd boxlet it doesnt work... I think ww have the same problem... May it help u......
Sent from my GT-S5670 using xda premium

And a big sorry for my terible english....... (●*∩_∩*●)
i think your problem is :
1: you do t have the latest dotnet fix......
2. your kies is not ip to date or u even doesn't install it....
3. or your antivirus block the acces.so plz stop all of your antivirus begore flasing use odin...
4. u have usb problem..plz search on it..im not master about it... im just a new kid on the block lol (︶︿︶)
the thing that should u do....
1. check your version of wi diws and dotnet fix.
2. stop all of your antivirus....
3. try reinstal kies first and update it....than run your odin....
Sent from my GT-S5670 using xda premium

I have the same problem... I've tried everything... I don't know what else to do (

reizen said:
I have the same problem... I've tried everything... I don't know what else to do (
Click to expand...
Click to collapse
Im not master bout it.but before trying can u write here soec of your pc....
Sent from my GT-S5670 using xda premium

sorry .... can be more explicit ... I do not know very well English

Haha lol sorry there somany eror on what i've type
Sent from my GT-S5670 using xda premium

reizen said:
sorry .... can be more explicit ... I do not know very well English
Click to expand...
Click to collapse
Can you share your pc spec here.... Cause i think the problem is not on the odin but your pc software..
Sent from my GT-S5670 using xda premium

problem solved... thanks for help!
... was due to the USB port, I did not have USB 2.0 port

[Q]Galaxy Fit brick

Hello!
I got a small problem with a galaxy fit. It does power on and it shows a computer and a phone with an exclamation mark between them.
The only thing that is accessible is the download mode.
Now in download mode odin gets stuck at "mibib download.." and it just keeps counting the time.
Does anyone have a clue about what to do to get the phone working again?
P.S.
This is my friends phone and i wasn't with him when the accident happened, but i understood that he might have tried cu flash something and Odin got stuck and he pulled the cable.
Thank you.

you must also come into recovery ...
if you cant flash it with odin 4.38 ... (in download-mode)
Than you make an data wipe/reset and wipe the dalvik...
And the phone is not bricked

n00b.androidDEV said:
you must also come into recovery ...
Click to expand...
Click to collapse
Can you please be more specific about this procedure? I'm not familiar with it.
Also a link to a tutorial would be greatly appreciated.
Thank you.

Can you come in recovery?
Press Power On + Home Button at once

If i press home+power it shows the same logo as just trying to switch on. I cannot use the recovery menu.

viperasp said:
If i press home+power it shows the same logo as just trying to switch on. I cannot use the recovery menu.
Click to expand...
Click to collapse
Try reinstalling the system. Press 3 buttons together. Power On + Home + volume Down. Prepare all the in Odin, connect phone with your PC, and Start in Odin.

cant we use odin_multi_downloader_v4.42 , beni.ops . why it must be odin 4.38 . are there any diferences

have you used odin 1.7 or 1.8?
galaxy tab versions!!
bcoz in my galaxy tab it comes when
odin fails!
but i can solve that problem by flashing
(dbdata.tar)file!!! only in mySAMGUNG
GALAXY TAB 7 ,not tried 4 fit yet ,but
with galaxy TAB it works,
you just have to do is put(dbdata.tar)in
the first of the Odin blank row that is
(PDA)and connect Tab to pc and press
"Start"
only works for galaxy TAB ,dont knw
abt fit!!!!
but 100% work for Tab
u can try this on fit ,i dont knw wat will happen!
it may work!!

djozaa said:
cant we use odin_multi_downloader_v4.42 , beni.ops . why it must be odin 4.38 . are there any diferences
Click to expand...
Click to collapse
I use Odin 4.38, and use Beni v1.0.ops. When on the phone display a yellow triangle to download I connect the phone to the computer and when the port is detected I click on Start and wait until it's over, and that to me takes about 5 minutes. When it is almost square in the port is blue.

may b u can use unisoft unbrick....just google it out..
i wil provide u wid some more info if u can just tel me if u can enter in recovery mode nd by the way wat recovery it is...the stock i mean samsung 1's or the clockworkmod recovery.....

I too faced similar problm..did u flash in windows 7??coz i had the same prob on win 7 then flashed in xp n worked..u must be admin inorder to use odin hope it helps u

vijayanandssj4 said:
I too faced similar problm..did u flash in windows 7??coz i had the same prob on win 7 then flashed in xp n worked..u must be admin inorder to use odin hope it helps u
Click to expand...
Click to collapse
To Odin work should be installed by the driver when the phone is connected to the computer. If you can not install the driver, Odin can not work, not port may be to open.

ZmisiS said:
To Odin work should be installed by the driver when the phone is connected to the computer. If you can not install the driver, Odin can not work, not port may be to open.
Click to expand...
Click to collapse
Hey bro by drivers do u mean samsung drivers???if yes then i do have samsung drivers in win 7 but still doesnt flash..win7 sucks it has more administration rights problems

viperasp said:
Hello!
I got a small problem with a galaxy fit. It does power on and it shows a computer and a phone with an exclamation mark between them.
The only thing that is accessible is the download mode.
Now in download mode odin gets stuck at "mibib download.." and it just keeps counting the time.
Does anyone have a clue about what to do to get the phone working again?
P.S.
This is my friends phone and i wasn't with him when the accident happened, but i understood that he might have tried cu flash something and Odin got stuck and he pulled the cable.
Thank you.
Click to expand...
Click to collapse
if ur sure it wont work...it may be surely bricked ..l had bricked too..fortunately..my fone's warranty was active...i gave to the samsung centre....they changed my motherboard for free due to the warranty!

vijayanandssj4 said:
Hey bro by drivers do u mean samsung drivers???if yes then i do have samsung drivers in win 7 but still doesnt flash..win7 sucks it has more administration rights problems
Click to expand...
Click to collapse
I have Windows 7 x64 and it is OK. On Odin you need go as Administrator. Drivers are installed automatically for me when I connect the phone and computer.

ZmisiS said:
I have Windows 7 x64 and it is OK. On Odin you need go as Administrator. Drivers are installed automatically for me when I connect the phone and computer.
Click to expand...
Click to collapse
Hmm i too have an admin account on win7 x64 still odin doesn't work for me...

vijayanandssj4 said:
Hmm i too have an admin account on win7 x64 still odin doesn't work for me...
Click to expand...
Click to collapse
Right click on Odin ...
Turn off your cell phone, press 3 buttons at once: Menu + Power + Down Sound, wait until the phone display a yellow triangle appears to download, when it appears, connect your phone to your computer and you should get this:

Fit goes to bootloop after flashing stock firmware
ZmisiS said:
Try reinstalling the system. Press 3 buttons together. Power On + Home + volume Down. Prepare all the in Odin, connect phone with your PC, and Start in Odin.
Click to expand...
Click to collapse
I flashed stock firmware using odin and it successfully got completed but after rebooting it gets stuck on samsung logo and goes into bootloop. Can u help me to recover my fit....

vijayf5 said:
I flashed stock firmware using odin and it successfully got completed but after rebooting it gets stuck on samsung logo and goes into bootloop. Can u help me to recover my fit....
Click to expand...
Click to collapse
goto recovery and wipe data & cache
remove bettery and switch it on again..

vijayf5 said:
I flashed stock firmware using odin and it successfully got completed but after rebooting it gets stuck on samsung logo and goes into bootloop. Can u help me to recover my fit....
Click to expand...
Click to collapse
Go in Recovery and it is enough to do the wipe data / recovery and reboot.
In Recovery you can go in a way that together press Home and Power buttons.

[Q] My Galaxy Fit Is In Danger

Few days later i tried to flash firmware 2.3.4 to my galaxy fit via odin but the process failed and after it my phone does't boot and not going into download mode...the phone has only a blank screen no key is working...when conected to charger a little beeping sound is produced but the screen remain black...then i take the phone to care centre in my area he tried a usb jig but nothing happend the phone still dead...please help me i am in a big problem i love my phone and don't want to lose it...:crying:

Try this
manpreet135 said:
Few days later i tried to flash firmware 2.3.4 to my galaxy fit via odin but the process failed and after it my phone does't boot and not going into download mode...the phone has only a blank screen no key is working...when conected to charger a little beeping sound is produced but the screen remain black...then i take the phone to care centre in my area he tried a usb jig but nothing happend the phone still dead...please help me i am in a big problem i love my phone and don't want to lose it...:crying:
Click to expand...
Click to collapse
Try this...
1. Install mobile drivers on pc and open Odin.exe
2. Connect phone to pc. Remove the battery.
3. Now, hold down VOLUME(-) and HOME key and POWER key together to get download mode.
4. While holding these 3 keys, (and your phone stll connected to pc) insert the battery.
Now Odin should detect your phone. If still it doesn't , then take it to the center.
If odin detects phone, flash the official firmware.
Hope it helps.

That Does't Work
Mr.Attitude02 said:
Try this...
1. Install mobile drivers on pc and open Odin.exe
2. Connect phone to pc. Remove the battery.
3. Now, hold down VOLUME(-) and HOME key and POWER key together to get download mode.
4. While holding these 3 keys, (and your phone stll connected to pc) insert the battery.
Now Odin should detect your phone. If still it doesn't , then take it to the center.
If odin detects phone, flash the official firmware.
Hope it helps.
Click to expand...
Click to collapse
I have tried all the tricks but no one is working even the Technician has tried the JIG but it also give no Help...if you know any other effective hardware or software to fix this problem than pls tell me......and I also heard about JTAG BOX...can this hardware fix my problem?,this should not be as a JIG coz JIG can't solve my problem and from where i can get this if the care centre or technician haven't...

Mr.Attitude02 said:
Try this...
1. Install mobile drivers on pc and open Odin.exe
2. Connect phone to pc. Remove the battery.
3. Now, hold down VOLUME(-) and HOME key and POWER key together to get download mode.
4. While holding these 3 keys, (and your phone stll connected to pc) insert the battery.
Now Odin should detect your phone. If still it doesn't , then take it to the center.
If odin detects phone, flash the official firmware.
Hope it helps.
Click to expand...
Click to collapse
Exactly what I posted. Thanks for telling...
Sent Via XDA™ Premium

option 2
here is the thread <http://forum.xda-developers.com/showthread.php?t=1349547>
by Ajay: Thanks to jtag box . I got delhi's dealer's address from official jtag site. I contacted him and he repaired boot with jtag.
he was able to solve his issue.
contact or PM him for ur concern
---------- Post added at 12:35 PM ---------- Previous post was at 12:30 PM ----------
Galaxy_Rohit said:
Exactly what I posted. Thanks for telling...
Sent Via XDA™ Premium
Click to expand...
Click to collapse
hmm
Mr.Attitude02_ROHIT took help from Galaxy_Rohit
just thot ur comment wud solve his prob.

manpreet135 said:
I have tried all the tricks but no one is working even the Technician has tried the JIG but it also give no Help...if you know any other effective hardware or software to fix this problem than pls tell me......and I also heard about JTAG BOX...can this hardware fix my problem?,this should not be as a JIG coz JIG can't solve my problem and from where i can get this if the care centre or technician haven't...
Click to expand...
Click to collapse
Here's the Jtag box dealers' list
http://www.jtagbox.com/category/jtag-dealers/
Here're the shops where you can unbrick your phone
http://www.jtagbox.com/riff-jtag-bo...s-unbrick-bricked-phone-riff-box-owners-list/
And here's the official page of RIFF JTAG Samsung Galaxy Fit GT-S5670 unbrick BOOT REPAIR SUPPORTED
www.jtagbox.com/jtag-news/riff-jtag-samsung-galaxy-fit-gts5670-unbrick-boot-repair-supported/
Sent Via XDA™ Premium

is my phone(s5670) is deed ???? pleas help my

pleas help me about my phone
whine i open my phone just gives (Samsung) and power off after that
no download mod or recovery mood

bbakr said:
pleas help me about my phone
whine i open my phone just gives (Samsung) and power off after that
no download mod or recovery mood
Click to expand...
Click to collapse
maybe you have battery problem. what happens when you connect your charger?

maybe you have battery problem. what happens when you connect your charger?
when i connect charger not responding
this problem when i install new room in recovery mood
after that my phone not working any mood

bbakr said:
maybe you have battery problem. what happens when you connect your charger?
when i connect charger not responding
this problem when i install new room in recovery mood
after that my phone not working any mood
Click to expand...
Click to collapse
Need not to worry as its not a HARD Brick. Its a soft brick.
Just flash any stock firmware through odin. Give a try. Not sure if it will work.

Rohit02 said:
Need not to worry as its not a HARD Brick. Its a soft brick.
Just flash any stock firmware through odin. Give a try. Not sure if it will work.
Click to expand...
Click to collapse
he can't enter download mode. so odin won't work. @bbakr u can try USB JIG on your phone and enter factory download mode for odin flashing. i hope this works.

ehsan-black said:
he can't enter download mode. so odin won't work. @bbakr u can try USB JIG on your phone and enter factory download mode for odin flashing. i hope this works.
Click to expand...
Click to collapse
what is USB JIG pleas explain it
and thanks for your interest

bbakr said:
what is USB JIG pleas explain it
and thanks for your interest
Click to expand...
Click to collapse
there is an alternative download mode on your phone called factory download mode. when you connect USB JIG to your phone you will enter to that mode. here is the way that you can make your own JIG:
http://forum.xda-developers.com/showthread.php?t=1604707
and you can borrow it from another users:
http://forum.xda-developers.com/showthread.php?t=1891197
or you can simply buy that online. google it!

ehsan-black said:
there is an alternative download mode on your phone called factory download mode. when you connect USB JIG to your phone you will enter to that mode. here is the way that you can make your own JIG:
http://forum.xda-developers.com/showthread.php?t=1604707
and you can borrow it from another users:
http://forum.xda-developers.com/showthread.php?t=1891197
or you can simply buy that online. google it!
Click to expand...
Click to collapse
Thanks very very much every thing is ok you are very professional

bbakr said:
Thanks very very much every thing is ok you are very professional
Click to expand...
Click to collapse
does it works?
Happy to help
for thanking just press thanks button.

ehsan-black said:
does it works?
Happy to help
for thanking just press thanks button.
Click to expand...
Click to collapse
Thanksssssssssssssss

Please :( Bootloader died

On my L, accidently flashed xperia U's firmware, then rebooted and died :crying::crying::crying: what can I do? when trying to attach device in fastboot, flashboot mode, nothing happens. Please, please help me guys.
thanks

not solutions ? :crying::crying:

Steve Mc. Gregory said:
not solutions ? :crying::crying:
Click to expand...
Click to collapse
Try flash stock fw back..pull out battery with push power button about 3-5 sec then connect to flash..
If its failed then i guess goodbye to your device..

I'll Try. thanks for support

I too have same problem kindly give me some solution

Your device is dead.

grewal720 said:
I too have same problem kindly give me some solution
Click to expand...
Click to collapse
See possible solution stated above.
aleksander002 said:
Your device is dead.
Click to expand...
Click to collapse
Technically, a non organic thing can't die.
Send from da hood

i have tried but my phone doesn't get into flash mode or fastboot mode.

grewal720 said:
i have tried but my phone doesn't get into flash mode or fastboot mode.
Click to expand...
Click to collapse
Then it's dead, and the only thing you can do about it is send it to a service center.

Isn't there a way for xperia l to recover from hard brick like xperia z1 via test point or something bcz sending for repair will be very expensive and it would be better of buying a new phone.

Is it possible that device becomes totally unrecoverable(hard bricked) when i attempted to change partitions and went wrong.

bassil.alzoubi said:
hi
1-make sure you battery is charged
2-pull out battery for 10 minutes
3-connect your phone in flash mode (hold vol down button then connect usb cable
not work ?
try another usb cable another usb port
i dont think the phone will totally dead by flashing a wrong firmware but i think its a battery issue
Click to expand...
Click to collapse
Thanks for reply. it was port issue. data wasnt working

Guys
I had hard bricked X10. So use JTAG/REFF connection and rebuild your device. It's so hard, but I made it good luck

Hm ..
bassil.alzoubi said:
i told you try another usb port
and dont say thanks ....press it :good:
Click to expand...
Click to collapse
already pressed man thanks for useful reply :good: