Related
So I upgraded my firmware to 3.24 for ARHD ICS but then wanted to try TripNice ICS AOSP now it is in a bootloop. Then I tried CM7 but had the same thing do i need to downgrade my firmware help please
Are you doing a full wipe of your data, cache, and delvik cache when you flash the ROM? Also I am not positive but you may need to be super cid to flash the ROM you want to use.
T-Macgnolia said:
Are you doing a full wipe of your data, cache, and delvik cache when you flash the ROM? Also I am not positive but you may need to be super cid to flash the ROM you want to use.
Click to expand...
Click to collapse
Yes I have wiped no super cid running ARHD now and fine but TripNice I ran a week ago woked without this 3.24 firmware
Thanks for the help
tripnice works only inder its own firmware version which trip made, you can find it in the same forum where his ROM is
for CM7 you have to downgrade your firmware to 3.12 which can be found in this thread:
http://forum.xda-developers.com/showthread.php?t=1459767
nonione said:
tripnice works only inder its own firmware version which trip made, you can find it in the same forum where his ROM is
for CM7 you have to downgrade your firmware to 3.12 which can be found in this thread:
http://forum.xda-developers.com/showthread.php?t=1459767
Click to expand...
Click to collapse
Thanks a ton I'd press thanks a million if i could
Ok one last thing I can only find the old version where can I get the new one.
jordan123hi said:
Ok one last thing I can only find the old version where can I get the new one.
Click to expand...
Click to collapse
Its all in the first page of that thread. Look carefully
Sent from my HTC Sensation XE with Beats Audio using XDA App
Hi!
I tried different rom's with ICS but every ICS ROM stuck after installing freeze on boot I don't know how to repair this bug I guess is a bug of my phone... I wanted to install ICS on HTC Sensation 4g
Android 2.3.5
Sense 3.5
CoreDroid v3.2
Kernel 2.6.35.14-Sensation-faux123-v0.2.8+
baseband 10.56.9035.00P_10.14.9035.01_M
any Tutorial will be aprichiated!
Thank you in Advance
Update firmware and it should boot:
http://forum.xda-developers.com/showthread.php?t=1412618
Sent from my Pyramid-T
stringer7 said:
Update firmware and it should boot:
http://forum.xda-developers.com/showthread.php?t=1412618
Sent from my Pyramid-T
Click to expand...
Click to collapse
I don't know witch of them my cidnum: is TM0D010 but is unlocked and I use it in Europe Albania should I use another RUU Firmware...and is any risk to re-lock the SIM..
Thank You in advance...
Best plan is to superCID your phone. You then never gave to worry as you can flash any firmware/ruu. Sticky guide in dev thread.
Sent from my Pyramid-T
sinaps1 said:
I don't know witch of them my cidnum: is TM0D010 but is unlocked and I use it in Europe Albania should I use another RUU Firmware...and is any risk to re-lock the SIM..
Thank You in advance...
Click to expand...
Click to collapse
If you look in the ROM thread, the developer should mention which Firmware you need to use. 3.32 is the most stable right now, so I would assume that you should upgrade to that and then try again.
Regarding your CID#, you can change as mentioned in Step 4 here: http://forum.xda-developers.com/showthread.php?t=1192300
OR
You can add your CID# to the list as mentioned in the first post in the link that stringer posted
stringer7 said:
Best plan is to superCID your phone. You then never gave to worry as you can flash any firmware/ruu. Sticky guide in dev thread.
Sent from my Pyramid-T
Click to expand...
Click to collapse
ok I superCID the phone changed the cidnum to 111111 before and put the Firmware from 3.32.401.x & 3.32.401.10x RUU but nothing happened maybe the one I put before was same version...I installed the coredroid 4.1 sense 3.6 and the phone looks ok but it turns of frequently and after a call it power's off don't understand...maybe anyone can suggest a stable ROM because for what all that started was to preserve battery life.... so I got stuck in that maybe should I restore from a backup that I made before???
i want to update my firmware to 3.33 to flash elegancia rom or any other Rom that requires 3.33 but evertime i update the firmware it still says I'm on 3.32 I'm new to the sensation and would really appreciate some help thanks!
imxsteezin said:
i want to update my firmware to 3.33 to flash elegancia rom but evertime i update it it stays on 3.32 any suggestions?
Click to expand...
Click to collapse
I was on like...1.27 and it flashed just fine. It should work on 3.32 and 3.33. Try and flash again the Rom, wipe first thoe. Hope I helped
-Sent From My HTC Sensation Running Android Revolution HD /w Beats Audio
I think you should only have problems if you use a newer android version on a older firmware. The firmware has some type of backwards compatibility in them but roms can become buggy if you uses a older firmware.
9595jakob said:
I was on like...1.27 and it flashed just fine. It should work on 3.32 and 3.33. Try and flash again the Rom, wipe first thoe. Hope I helped
-Sent From My HTC Sensation Running Android Revolution HD /w Beats Audio
Click to expand...
Click to collapse
So wipe before I flash the firmware? I'm still kind of lost
Sent from my HTC Sensation Z710 using xda app-developers app
darryll4sh0 said:
I think you should only have problems if you use a newer android version on a older firmware. The firmware has some type of backwards compatibility in them but roms can become buggy if you uses a older firmware.
Click to expand...
Click to collapse
So what should I do?
Sent from my HTC Sensation Z710 using xda app-developers app
To update the firmware put the pg58img file on root of sd card,boot into bootloader by removing battery, place battery back in, press volume down sand power at the same time, the device will recognize the update and ask to proceed, volume up for yes. The device will then update and reboot.once fully rebooted REMOVE the pg58img file from the device or it will continue to update ! You now successfully updated the firmware! It will be successfully updated. Hope this helps you.
Sent from my HTC Sensation 4G using xda premium
imxsteezin said:
i want to update my firmware to 3.33 to flash elegancia rom or any other Rom that requires 3.33 but evertime i update the firmware it still says I'm on 3.32 I'm new to the sensation and would really appreciate some help thanks!
Click to expand...
Click to collapse
if you are checking the version thru Softwarw Information in Settings, the version is hard coded in the build prop.
Sent from my HTC Sensation XE with Beats Audio Z715e using Tapatalk 2
realsis said:
To update the firmware put the pg58img file on root of sd card,boot into bootloader by removing battery, place battery back in, press volume down sand power at the same time, the device will recognize the update and ask to proceed, volume up for yes. The device will then update and reboot.once fully rebooted REMOVE the pg58img file from the device or it will continue to update ! You now successfully updated the firmware! It will be successfully updated. Hope this helps you.
Sent from my HTC Sensation 4G using xda premium
Click to expand...
Click to collapse
i know how to update it my problem is when i do do it succesfully updates but when i go into my setting and my software info it stays on 3.32
imxsteezin said:
i know how to update it my problem is when i do do it succesfully updates but when i go into my setting and my software info it stays on 3.32
Click to expand...
Click to collapse
Known issue. Ignore it. As vernon mentioned, it is in the /system/build.prop file if you really want to edit it to change the number.
realsis said:
To update the firmware put the pg58img file on root of sd card,boot into bootloader by removing battery, place battery back in, press volume down sand power at the same time, the device will recognize the update and ask to proceed, volume up for yes. The device will then update and reboot.once fully rebooted REMOVE the pg58img file from the device or it will continue to update ! You now successfully updated the firmware! It will be successfully updated. Hope this helps you.
Sent from my HTC Sensation 4G using xda premium
Click to expand...
Click to collapse
mf2112 said:
Known issue. Ignore it. As vernon mentioned, it is in the /system/build.prop file if you really want to edit it to change the number.
Click to expand...
Click to collapse
the problem im having is when i try to flash a rom that requires 3.33 firmware it gets stuck at the htc screen
I got a bootloop flashing sense o maniac Rom and I tried the viper s 1.0.1rom and it got stuck at the HTC screen please help me
Sent from my HTC Sensation Z710 using xda app-developers app
What radio are you on now. If you have 11.76a you have 3.33, unless you flashed the radio separately in the past.
Are you trying to flash leedroid tweaks or something?
I'm using Insertcoin Evolution 2.2 now and am having a great time.
ziddey said:
What radio are you on now. If you have 11.76a you have 3.33, unless you flashed the radio separately in the past.
Are you trying to flash leedroid tweaks or something?
I'm using Insertcoin Evolution 2.2 now and am having a great time.
Click to expand...
Click to collapse
Im not sure because someone had this phone before me
ziddey said:
What radio are you on now. If you have 11.76a you have 3.33, unless you flashed the radio separately in the past.
Are you trying to flash leedroid tweaks or something?
I'm using Insertcoin Evolution 2.2 now and am having a great time.
Click to expand...
Click to collapse
No I'm using friendly firmware
I just want to downgrade from 3.33 to 3.32 because it is causing me touchscreen issues.
When i try to install 3.32 RUU i get the error "Wrong Bootloader Version"
My present RUU is 3.33.401.6 Radio_11.76A.3504.00U_11.24A.3504.31
My HBOOT Version is 1.27
My device is all STOCK and unrooted
if SON ..you cant downgrade even by using a RUU
ganeshp said:
if SON ..you cant downgrade even by using a RUU
Click to expand...
Click to collapse
it means i need to ROOT and SOFF by following JB's wiretrick method ?
alishan said:
it means i need to ROOT and SOFF by following JB's wiretrick method ?
Click to expand...
Click to collapse
Hi,
Yes.
Look in ganesh's signature for a complete guide.
malybru said:
Hi,
Yes.
Look in ganesh's signature for a complete guide.
Click to expand...
Click to collapse
Hi, I have rooted s-off Hboot 1.27.1100 Sensation 3.6 ARHD 6.7.2 FW3.33 but i want to go back to ARHD 6.6.7 because i feel it was working better for me.
I want to also downgrade the firmware to 3.32 so i can flash the RAM+SD Hack Sense 3.6 3.32.zip because it made such a huge difference!
and this flash doesn't work on 3.33, it just makes the ph boot-loop.
I've tried manually editing that hack for 3.33 following these instructions (http://forum.xda-developers.com/showthread.php?t=1699591) with build.prop edit, uploading services.jar and then i got stuck at editing init.qcom.post_boot.sh
I just couldn't quite understand where to add the additional lines so i'm happy to just go back to what worked.
I haven't been able to find some clear instructions on downgrading this firmware but after searching it seemed all i needed was s-off and to just flash the 3.32 firmware.
So far i've superwiped, flashed 3.32 firmware and flashed ARHD 6.6.7 but once the ph is up and running, under settings/about ph, the firmware is still 3.33.
Any suggestions plz?
HsHTCsen said:
Hi, I have rooted s-off Hboot 1.27.1100 Sensation 3.6 ARHD 6.7.2 FW3.33 but i want to go back to ARHD 6.6.7 because i feel it was working better for me.
I want to also downgrade the firmware to 3.32 so i can flash the RAM+SD Hack Sense 3.6 3.32.zip because it made such a huge difference!
and this flash doesn't work on 3.33, it just makes the ph boot-loop.
I've tried manually editing that hack for 3.33 following these instructions (http://forum.xda-developers.com/showthread.php?t=1699591) with build.prop edit, uploading services.jar and then i got stuck at editing init.qcom.post_boot.sh
I just couldn't quite understand where to add the additional lines so i'm happy to just go back to what worked.
I haven't been able to find some clear instructions on downgrading this firmware but after searching it seemed all i needed was s-off and to just flash the 3.32 firmware.
So far i've superwiped, flashed 3.32 firmware and flashed ARHD 6.6.7 but once the ph is up and running, under settings/about ph, the firmware is still 3.33.
Any suggestions plz?
Click to expand...
Click to collapse
Hi,
I am not sure where you got your 3.32 firmware,but try using THIS ONE
Check the md5 checksum before flashing.
Make sure it completes.
It will say update complete.
I'm looking at reverting my Sensation from ARHD to a stock ROM just to check a few issues I'm having with a track recording app. Can I use this and still be able to flash back to the latest ARHD ROM after I have confirmed the app is faulty?
alanapone said:
I'm looking at reverting my Sensation from ARHD to a stock ROM just to check a few issues I'm having with a track recording app. Can I use this and still be able to flash back to the latest ARHD ROM after I have confirmed the app is faulty?
Click to expand...
Click to collapse
if you are S-OFF yes you can
flash first the appropriate fw for the stock rom and then flash the rom
for reverting back to ARHD ROM: just flash again the appropriate fw and then ARHD ROM
Check the md5 checksum before flashing
don't forget to rename the zip file as PG58IMG.zip
malybru said:
Hi,
I am not sure where you got your 3.32 firmware,but try using THIS ONE
Check the md5 checksum before flashing.
Make sure it completes.
It will say update complete.
Click to expand...
Click to collapse
Thank you.
Do i just flash it as is and reboot the ph or do i need to superwipe then flash firmware and 6.6.7 rom again?
rzr86 said:
if you are S-OFF yes you can
flash first the appropriate fw for the stock rom and then flash the rom
for reverting back to ARHD ROM: just flash again the appropriate fw and then ARHD ROM
don't forget to rename the zip file as PG58IMG.zip
Click to expand...
Click to collapse
Thanks.
I have the FW from the post above. Is the ROM the RUU? I found one a minute ago but lost the thread. I need one for UK but don't want to re-brand as Vodafone don't I?
HsHTCsen said:
Thank you.
Do i just flash it as is and reboot the ph or do i need to superwipe then flash firmware and 6.6.7 rom again?
Click to expand...
Click to collapse
superwipe>flash fw and then flash 6.6.7 rom
---------- Post added at 12:22 AM ---------- Previous post was at 12:17 AM ----------
alanapone said:
Thanks.
I have the FW from the post above. Is the ROM the RUU? I found one a minute ago but lost the thread. I need one for UK but don't want to re-brand as Vodafone don't I?
Click to expand...
Click to collapse
if you are seeking for an ruu.exe see here
http://forum.xda-developers.com/showthread.php?t=1672425
rzr86 said:
if you are seeking for an ruu.exe see here
http://forum.xda-developers.com/showthread.php?t=1672425
Click to expand...
Click to collapse
So I ONLY need to flash the PG58IMG file then?
Sorry, it was a while ago when I originally flashed my Sensation.
rzr86 said:
superwipe>flash fw and then flash 6.6.7 rom
---------- Post added at 12:22 AM ---------- Previous post was at 12:17 AM ----------
if you are seeking for an ruu.exe see here
http://forum.xda-developers.com/showthread.php?t=1672425
Click to expand...
Click to collapse
If i can't get this firmware downgraded to 3.32, can i safely run ARHD 6.6.7 on 3.33 base?
alanapone said:
So I ONLY need to flash the PG58IMG file then?
Sorry, it was a while ago when I originally flashed my Sensation.
Click to expand...
Click to collapse
maybe you have been confused a little bit
by using a ruu.exe you are returning to the completely stock situation of your device.no need the PG58IMG.zip file
but you can flash the rooted stock ics rom after flashing the PG58IMG.zip
i hope you understood what i mean
---------- Post added at 01:10 AM ---------- Previous post was at 01:08 AM ----------
HsHTCsen said:
If i can't get this firmware downgraded to 3.32, can i safely run ARHD 6.6.7 on 3.33 base?
Click to expand...
Click to collapse
if ARHD 6.6.7 requires the 3.32 fw base then no otherwise your device will stuck at htc logo
rzr86 said:
maybe you have been confused a little bit
by using a ruu.exe you are returning to the completely stock situation of your device.no need the PG58IMG.zip file
but you can flash the rooted stock ics rom after flashing the PG58IMG.zip
i hope you understood what i mean
---------- Post added at 01:10 AM ---------- Previous post was at 01:08 AM ----------
if ARHD 6.6.7 requires the 3.32 fw base then no otherwise your device will stuck at htc logo
Click to expand...
Click to collapse
Ok, so would another option be to use ruu to go back to complete stock (does this rewind hboot also and s-on?) and then start again or it doesn't work like that?
Sent from my HTC Sensation XE with Beats Audio using xda app-developers app
HsHTCsen said:
Ok, so would another option be to use ruu to go back to complete stock (does this rewind hboot also and s-on?) and then start again or it doesn't work like that?
Sent from my HTC Sensation XE with Beats Audio using xda app-developers app
Click to expand...
Click to collapse
i assume you can.about locking hboot and returning to S-ON there fastboot commands in the link that i mentioned above about ruu.exe
see there
Hi, anyone have the ARHD 6.6.7 rom downlod link?
Sent from my ASUS Transformer Pad TF300TG using xda premium
rzr86 said:
superwipe>flash fw and then flash 6.6.7 rom
---------- Post added at 12:22 AM ---------- Previous post was at 12:17 AM ----------
if you are seeking for an ruu.exe see here
http://forum.xda-developers.com/showthread.php?t=1672425
Click to expand...
Click to collapse
I superwiped, flashed 3.32 fw from the link earlier and flashed Rom but my settings/about ph still says I'm on 3.33 base. It appears not to be downgrading. Is there another way I can display my current firmware on my sensation?
Sent from my HTC Sensation XE with Beats Audio using xda premium
malybru said:
Hi,
I am not sure where you got your 3.32 firmware,but try using THIS ONE
Check the md5 checksum before flashing.
Make sure it completes.
It will say update complete.
Click to expand...
Click to collapse
Hi
I've superwiped, flashed 3.32 firmware from your link and it displayed update complete and flashed Rom but settings/about ph still says 3.33
Sent from my HTC Sensation XE with Beats Audio using xda premium
HsHTCsen said:
Hi
I've superwiped, flashed 3.32 firmware from your link and it displayed update complete and flashed Rom but settings/about ph still says 3.33
Sent from my HTC Sensation XE with Beats Audio using xda premium
Click to expand...
Click to collapse
Hi,
That does not actually display the firmware.
Rather,it shows the the base of the ROM you are using.
Have you flashed the new ROM yet?
If you want to see the actual firmware version,use fastboot command:
Code:
fastboot getvar version-main
hi, i've read several tutorials in the Sensation section on how to S-off, root,etc.
im already S-off and trying to flash to CM10. i was able to flash it but the phone keeps restarting and its unuseable. So i restored back to original for now.
before the flash i was on the original Android 2.3 Gingerbread. i read somewhere that you need to upgrade to 3.32 atleast.
can someone show me the steps to upgrade to CM10 from where my phone is currently?
Yes , u need ics firmware... 3.32 or 3.33
Go d following link and flash universal 3.33 firmware
And flash any ics or jelly bean Rom from dev section
http://forum.xda-developers.com/showthread.php?t=1459767
Sent from my Sensation using xda app-developers app
Itsakash said:
Yes , u need ics firmware... 3.32 or 3.33
Go d following link and flash universal 3.33 firmware
And flash any ics or jelly bean Rom from dev section
http://forum.xda-developers.com/showthread.php?t=1459767
Sent from my Sensation using xda app-developers app
Click to expand...
Click to collapse
so basically all i need to do is flash to the universal 3.33 firmware.
once thats done i flash to CM10?
R6Tuan said:
so basically all i need to do is flash to the universal 3.33 firmware.
once thats done i flash to CM10?
Click to expand...
Click to collapse
yeap
but for sure flash first 3.32 and then 3.33 fw version
after that CM10
rzr86 said:
yeap
but for sure flash first 3.32 and then 3.33 fw version
after that CM10
Click to expand...
Click to collapse
i went to the first link Itsakash posted and clicked on the 3.32 fm link but theres no longer a link to download. would it still work if i flash to 3.33 fw and then flashed CM10?
thanks for all your help btw, this is my first time rooting and its so frustrating and confusing.
R6Tuan said:
i went to the first link Itsakash posted and clicked on the 3.32 fm link but theres no longer a link to download. would it still work if i flash to 3.33 fw and then flashed CM10?
thanks for all your help btw, this is my first time rooting and its so frustrating and confusing.
Click to expand...
Click to collapse
i think you will be fine