Related
As some of you have come from the captivate know what I did there with Rom Q&A threads. I am doing the same here. In an effort to clean up the site. All Rom related question shall from now on be posted in the proper Q&A or will be deleted on sight.
I recently flashed Virtuous Unity Rom.
And now i want to flash LeeDrOiD v3.2.1 Kernel on top of it.
Can i do it without factory reset / wiping?
I will lose data?
What could possibly go wrong?
What are the steps?
Thanks
You may be able to escape without crudding up your phone if you flashed Leedroid on top of that, but honestly it's a bad idea. Back everything up with Titanium and the SMS backup tool of your choice (and maybe a phone log backup tool, if that matters to you) and do a factory reset and wipe Dalvik cache. Virtuous Unity and LeeDroid are very different from one another, and are based on two different builds of the Sense framework.
Pls Help
After flashing with LeeDrOiD 4G V3.3.3 GB rom and radio now I cant use gps its not accure satellite. I used the radio from this thread http://forum.xda-developers.com/show....php?t=1106324
Radio: 12.54.60.25x_26.09.04.11_M2
MD5 Sum: da5fb425443abc49655f4569b274f03e
Is it the same radio recommend by Lee? (MD5 is different). I tried with gps fix but no luck. I tried more than 10 min outside the house. Pls help me to resolve this. I can only see one satellite signal for whole time.
I also flashed it with AngelDeath gps fix but no gps fix.
Thanks.
whoops never mind wrong thread
warunamail said:
After flashing with LeeDrOiD 4G V3.3.3 GB rom and radio now I cant use gps its not accure satellite. I used the radio from this thread http://forum.xda-developers.com/show....php?t=1106324
Radio: 12.54.60.25x_26.09.04.11_M2
MD5 Sum: da5fb425443abc49655f4569b274f03e
Is it the same radio recommend by Lee? (MD5 is different). I tried with gps fix but no luck. I tried more than 10 min outside the house. Pls help me to resolve this. I can only see one satellite signal for whole time.
I also flashed it with AngelDeath gps fix but no gps fix.
Thanks.
Click to expand...
Click to collapse
He recommended a radio that works for him in his area. Yours may differ. Try to flash the new update gingerbread att radio.
Sent from my HTC Inspire 4G using XDA Premium App
XAviierG said:
He recommended a radio that works for him in his area. Yours may differ. Try to flash the new update gingerbread att radio.
Sent from my HTC Inspire 4G using XDA Premium App
Click to expand...
Click to collapse
Thanks for the reply. I flashed it with froyo Radio: 12.39a.60.19x_26.06.06.30_M
After doing everything I remove the phone cover. Then it works. I don't know whether the problem with radio or cover seems to me problem is the phone cover. Now still I'm using this radio and matching ril.
warunamail said:
Thanks for the reply. I flashed it with froyo Radio: 12.39a.60.19x_26.06.06.30_M
After doing everything I remove the phone cover. Then it works. I don't know whether the problem with radio or cover seems to me problem is the phone cover. Now still I'm using this radio and matching ril.
Click to expand...
Click to collapse
If your case was blocking the round oval where your flash light is then it was the case
Sent from my HTC Inspire 4G using XDA Premium App
SetCPU doesn't keep Smoothass governor when i reboot/power off.
Why?
I flashed the latest LeeDrOiD ROM and tinny audio has returned for me (or so I think)
My phone is still showing that I have an Inspire 4G however, so turbonium's audio fix should still be there right?
Anyone else having this issue?
LeeDrOiD 3.3.3
BFS Kernel
MmmmBeeeeer said:
I flashed the latest LeeDrOiD ROM and tinny audio has returned for me (or so I think)
My phone is still showing that I have an Inspire 4G however, so turbonium's audio fix should still be there right?
Anyone else having this issue?
LeeDrOiD 3.3.3
BFS Kernel
Click to expand...
Click to collapse
You could always just reflash the audio fix quickly, for grins.
Sent from my Inspire 4G using Tapatalk
That is what I did and sure enough it fixed it. Always go for the obvious I guess haha.
Is there a way to change the status bar colors to red? Like the wifi bars and battery indicator?
Power Cycling issue
I've been on Leedroid for the last couple builds but only recently has my phone been restarting when I press shutdown from the menu. Not sure if this is ROM problem or a phone problem. I did not make any significant changes before this started happening. Even when I pull the battery and leave it out for a minute or two, as soon as I put it back in it starts up w/out any input.
So any any insight would be appreciated.
Mine does the same thing. Restarts everytime I put turn off.
warunamail said:
After flashing with LeeDrOiD 4G V3.3.3 GB rom and radio now I cant use gps its not accure satellite. I used the radio from this thread http://forum.xda-developers.com/show....php?t=1106324
Radio: 12.54.60.25x_26.09.04.11_M2
MD5 Sum: da5fb425443abc49655f4569b274f03e
Is it the same radio recommend by Lee? (MD5 is different). I tried with gps fix but no luck. I tried more than 10 min outside the house. Pls help me to resolve this. I can only see one satellite signal for whole time.
I also flashed it with AngelDeath gps fix but no gps fix.
Thanks.
Click to expand...
Click to collapse
I just recently tried Lee and recommended radio but my DL speeds were horrid I went back to stock and boom instantly fixed you may want to try that if your still not happy
MMS trouble
I have been a lurker on here for a while and have flashed a few roms...now I am running 3.3.3 with the a radio and ril that work in my area but can't get mms at all, out going or incoming. The text will come through with a download button and when I hit it i get a failure. When I try to send I get a message cannot be sent message.
I have tried multiple radios, rils and both of Lee's kernels (stock and Brain F* scheduler)
I am just looking for a little help. I have a picture that I would really like to have that was sent via text from my mom of my son getting on the bus on his first day of kindergarten.
**edit** when I try to download a mms using radio 26.11.04.21_m and ril 2.2.0160hm I get a message of "Generic Network Failure"...and this has continued with every radio ril combo that I have tried over the last 5 days.
cagle333 said:
I have been a lurker on here for a while and have flashed a few roms...now I am running 3.3.3 with the a radio and ril that work in my area but can't get mms at all, out going or incoming. The text will come through with a download button and when I hit it i get a failure. When I try to send I get a message cannot be sent message.
I have tried multiple radios, rils and both of Lee's kernels (stock and Brain F* scheduler)
I am just looking for a little help. I have a picture that I would really like to have that was sent via text from my mom of my son getting on the bus on his first day of kindergarten.
**edit** when I try to download a mms using radio 26.11.04.21_m and ril 2.2.0160hm I get a message of "Generic Network Failure"...and this has continued with every radio ril combo that I have tried over the last 5 days.
Click to expand...
Click to collapse
You could try splitting out the single APN that comes with LeeDroid into 2 APNs; one for MMS and one for data. That is how it's done on the stock ROM. Here's the link to the procedure.
I've done that too. I'm really at a loss with this.
Sent from my Inspire 4G using XDA App
Install order
Hi to all. i have been using CM7 and Ninja for awhile now and i'm finally ready to go back to sense. i have decided to start with leedroid. i know how to flash a ROM but their are so many options to install on this ROM that i'm not sure in what order or what process to use. i what to install A2SD+ also leedroid, flyIn_Aminations, GB patch DHD to Inspire4g, and leedroids kernel. i have downloaded all the zip files but i'm not sure in what order or how to go about it. the A2SD is the one i'm the most unsure about as i've never done it. please help with this. a order list and process would be appreciated.
i posted this in the xi 40 thread .. would like to post here to see if similar case occurs,
After flashing xi40 1.89 rom, I am having awfull WiFi connection . WiFi will be connected but internet will just stop working. Had this phone fora month and never experienced any problems till I flashed this . Was on cleanrom before. And now funny part is after having bad WiFi here I decided to go back to cleanrom and now I get awfull WiFi there too.
So is it something with the new base 1.89?
Does this Rom flash kernal aswell? Then maybe it is a Kernal issue?
Can someone pls tell me which base or firmware had inbuilt WiFi issues?
i had flashed telus radio with ril before... was workign fine till this flash.. so i dont think its radio error? or is it?
thanks for your time
jags_the1 said:
i posted this in the xi 40 thread .. would like to post here to see if similar case occurs,
After flashing xi40 1.89 rom, I am having awfull WiFi connection . WiFi will be connected but internet will just stop working. Had this phone fora month and never experienced any problems till I flashed this . Was on cleanrom before. And now funny part is after having bad WiFi here I decided to go back to cleanrom and now I get awfull WiFi there too.
So is it something with the new base 1.89?
Does this Rom flash kernal aswell? Then maybe it is a Kernal issue?
Can someone pls tell me which base or firmware had inbuilt WiFi issues?
i had flashed telus radio with ril before... was workign fine till this flash.. so i dont think its radio error? or is it?
thanks for your time
Click to expand...
Click to collapse
You need to reflash radio after a rom flash the ril gets deleted when you do as it is kept in system partition which is wiped by rom before it's flashed. I had the same issue I flashed the 1.89 radio and it got better.
Sent from my HTC One X using xda premium
kleeman7 said:
You need to reflash radio after a rom flash the ril gets deleted when you do as it is kept in system partition which is wiped by rom before it's flashed. I had the same issue I flashed the 1.89 radio and it got better.
Sent from my HTC One X using xda premium
Click to expand...
Click to collapse
still same issue after flashing radio and ril..annoying thing is it wasnt present bfr
I have a 727r and I want to use it on wind, and have no idea what combo of rom / kernal / modem to use. what I do know:
The 727r radio has the ability to pick up the signal
The wind network uses HSPA+ - transmit on 1700, receive on 2100
There are modem files out there for these frequencies
Things I don't know
How to make sure a rom / kernel / radio will work with each other (hopefully without needing to spend hours flashing n! combinations)
How to figure out if a modem file will support my device, or the frequencies I need
Things I've tried
the 989 from Tmobile runs on HSPA+, so I tried installing a tmobo rom, kernel, and radio with little success.
Trying to install / flash different rom - kernel - modem combos (most of which results in baseband version:unknown - this means the modem and rom are incompatible right?)
What I'm asking
Is there anyone running a 727r on wind that wouldn't mind sharing their rom / kernel / modem combo?
Has anyone found a Cyanogen-kernel-modem combo that works?
I am NOT asking which is the "best". After spending 4 hours of flashing and praying things will work, I don't care if I get the "worst" rom. I just want a combo that works
WORKING(more or less) COMBOS:
R34P3ReX_T989_Skyrocket_Conversion - Juggernaut_50_0218 - Tmo_SGH-T989_KID_radio
Gingerbread base, gyroscope tilts screen wrong way, a bit buggy, but works
CM10, CM10, T989UVLH1
Works well enough, having Call issues though. Going to try a new radio
Cyanogen always gets terrible battery. Going to look for an optimized version but not a problem for me
CM10, Blaze 4G UVLH5
Calling worked, I could hear caller, but they heard a lot of garbled blarky. Not good
u don't need a specific ROM or kernel at all, all u need to do is try different t radios. try the uvle1 from the t989 aka Hercules subsection, and give the modem someone dumped from the i757m bell version to see if u can catch a signal. I strongly believe the later will work
pileot said:
I have a 727r and I want to use it on wind, and have no idea what combo of rom / kernal / modem to use. what I do know:
The 727r radio has the ability to pick up the signal
The wind network uses HSPA+ - transmit on 1700, receive on 2100
There are modem files out there for these frequencies
Things I don't know
How to make sure a rom / kernel / radio will work with each other (hopefully without needing to spend hours flashing n! combinations)
How to figure out if a modem file will support my device, or the frequencies I need
Things I've tried
the 989 from Tmobile runs on HSPA+, so I tried installing a tmobo rom, kernel, and radio with little success.
Trying to install / flash different rom - kernel - modem combos (most of which results in baseband version:unknown - this means the modem and rom are incompatible right?)
What I'm asking
Is there anyone running a 727r on wind that wouldn't mind sharing their rom / kernel / modem combo?
Has anyone found a Cyanogen-kernel-modem combo that works?
I am NOT asking which is the "best". After spending 4 hours of flashing and praying things will work, I don't care if I get the "worst" rom. I just want a combo that works
Click to expand...
Click to collapse
So.. im using the Tmo Radio.. the latests and you can get it here: http://forum.xda-developers.com/showthread.php?t=1895400
and as for the ROM i am using Cyanogenmod 10.0 but the T989 version.
works good.. dont forget to wipe everything.. as for the other comment where you just need to flash the radio.. dunno.. i tried that a couple of times and it didnt work.. however.. im about to try it again.. so ill let you know how it goes.. for now though.. just to get it working.. i would do the above..
tip: i initially flashed the UVLH1 radio.. worked great.. great signal.. then i updated the other day to the latest.. and it seems as though my signal is not as strong.. dunno.. but try it out.. you never know..
also.. on initial boot up.. you need to give it a couple of minutes for things to settle.. it should pick up the Wind signal by itself... if it doesnt after 5 mins.. then do a search.. but you shouldnt have a problem..
So.. i can confirm that you CAN install the TMO radio and the ATT Skyrocket CM 10 ROM!!!!!
Infact... it works great!!!
TIP: i can also confirm that the UVLH1 has a stronger signal than the UVLI4 radio which is the latest. not sure why.. but i reverted back to UVLH1
hope this helps!
df186 said:
So.. i can confirm that you CAN install the TMO radio and the ATT Skyrocket CM 10 ROM!!!!!
Infact... it works great!!!
TIP: i can also confirm that the UVLH1 has a stronger signal than the UVLI4 radio which is the latest. not sure why.. but i reverted back to UVLH1
hope this helps!
Click to expand...
Click to collapse
I have ROGERS_ICS_ULFX3 stock rom installed, baseband T989UVLH1, I flashed it and i get no sim error
Just before this on Stock gingerbread i had gotten it to work, but after 1 restart, everything got screwed up
Help me
I have been running SkyJB 4.1.2, and Blaze LB7 in Southern Ontario, picking up Wind signals. Speeds are okay, still trying to find the best combo, but that combo works.
kr4tos said:
I have ROGERS_ICS_ULFX3 stock rom installed, baseband T989UVLH1, I flashed it and i get no sim error
Just before this on Stock gingerbread i had gotten it to work, but after 1 restart, everything got screwed up
Help me
Click to expand...
Click to collapse
flash the radio twice,no cable plugged in before flashing rom, might help
df186 said:
So.. im using the Tmo Radio.. the latests and you can get it here: http://forum.xda-developers.com/showthread.php?t=1895400
and as for the ROM i am using Cyanogenmod 10.0 but the T989 version.
works good.. dont forget to wipe everything.. as for the other comment where you just need to flash the radio.. dunno.. i tried that a couple of times and it didnt work.. however.. im about to try it again.. so ill let you know how it goes.. for now though.. just to get it working.. i would do the above..
tip: i initially flashed the UVLH1 radio.. worked great.. great signal.. then i updated the other day to the latest.. and it seems as though my signal is not as strong.. dunno.. but try it out.. you never know..
also.. on initial boot up.. you need to give it a couple of minutes for things to settle.. it should pick up the Wind signal by itself... if it doesnt after 5 mins.. then do a search.. but you shouldnt have a problem..
Click to expand...
Click to collapse
I tried to install the T989 (Hercules) CM10 version but it kept failing to install
The recovery I'm using is Team Win Recovery, if that matters. I suspect either TWRP is not working or the Kernel is incompatible
What Kernel are you using?
pileot said:
I tried to install the T989 (Hercules) CM10 version but it kept failing to install
The recovery I'm using is Team Win Recovery, if that matters. I suspect either TWRP is not working or the Kernel is incompatible
What Kernel are you using?
Click to expand...
Click to collapse
if it was built for t989 specific phones it wont install because of the assert
u dont need a t989 rom anyways, but if you want to try them out make sure the updater script doesnt have the assert function and do the rotation fix
I'm using the i727r (Rogers) running CM 10.1. I'm still on Rogers using the stock radio for now. Is there any consensus as to which radio file to flash for best results?
I know this thread is a little stale, but I figured I would throw in my two cents.
I have an i727r, unlocked. Right now I am running PACman Rom (http://forum.xda-developers.com/showthread.php?t=2178402) with the Blaze LB7 radio (4th from the bottom here: http://forum.xda-developers.com/showthread.php?t=1895400). They said I shouldn't be able to run an ICS radio with a JB Rom, but somehow it seems to be working. Note that the radio was on there before flashing PACman.
The kernel showing up in my phone info is the one that came with the PACman Rom, 3.0.72-cyanogenmod. I know this because before flashing PACman over stock, the kernel was 3.0.8.
Having said all that I'm thinking about updating my radio, probably to UVMB1. I'm not sure if I should bother though. I have a Nexus S, which is designed as an AWS phone out of the factory, and when I put my SIM card in that phone, the speedtest results are the same as what I'm getting right now with the LB7 radio on the Skyrocket. So I'm not sure I'd gain much by updating. :/
Can some people in the GTA please chime in to help me.
I am using a Rogers Skyrocket.
SlimBean Rom 4.2.2 Official 7
T989UVMC6 radio/modem
I tried a few other modems and found this one to be the most stable as some did not even allow a call to be made.
This is what I noticed.
Full charge I talked for 20 minutes and lost 10% battery (from full charge)
I get erratic data speeds inside=500-1 and outside I get 3
The problem is the battery drain and signal strength.
What are you using and what is your battery life and signal strength?
Data speeds?
your location?
droiduzr2 said:
Can some people in the GTA please chime in to help me.
I am using a Rogers Skyrocket.
SlimBean Rom 4.2.2 Official 7
T989UVMC6 radio/modem
I tried a few other modems and found this one to be the most stable as some did not even allow a call to be made.
This is what I noticed.
Full charge I talked for 20 minutes and lost 10% battery (from full charge)
I get erratic data speeds inside=500-1 and outside I get 3
The problem is the battery drain and signal strength.
What are you using and what is your battery life and signal strength?
Data speeds?
your location?
Click to expand...
Click to collapse
My carrier is videotron, one of the most difficult carriers to get unlocked phones to work on. Here's what works for me, sim unlocked, rooted. Running cyanogenmod 10.1.0 RC2 with Blaze 4G LF4 radio, nobars battery saver and network booster. I'm still have the same issue as everyone else, baseband unknown and network type unknown. I've been running the stock kernel and I've been running like this for the past couple days, and touch wood, I haven't had any issues. I've tried the 2 Tmo radios, I got no signal what-so-ever, the telus radio kept dropping my connection, meaning, I would have to try and resend text messages several times before it would actually send. Now that I'm using my current setup, as described at the beginning of my post, no problems to date.
I hope my input helps out.
wraith79 said:
My carrier is videotron, one of the most difficult carriers to get unlocked phones to work on. Here's what works for me, sim unlocked, rooted. Running cyanogenmod 10.1.0 RC2 with Blaze 4G LF4 radio, nobars battery saver and network booster. I'm still have the same issue as everyone else, baseband unknown and network type unknown. I've been running the stock kernel and I've been running like this for the past couple days, and touch wood, I haven't had any issues. I've tried the 2 Tmo radios, I got no signal what-so-ever, the telus radio kept dropping my connection, meaning, I would have to try and resend text messages several times before it would actually send. Now that I'm using my current setup, as described at the beginning of my post, no problems to date.
I hope my input helps out.
Click to expand...
Click to collapse
Ur input doesn't really help... 10.1 REQUIRES ucmc1 or ruxau7 , neither of which ur using. Try one of those radios and then post results
Edited: UVMB1 as well
icenight89 said:
Ur input doesn't really help... 10.1 REQUIRES ucmc1 or ruxau7 , neither of which ur using. Try one of those radios and then post results
Click to expand...
Click to collapse
Well, if it NEEDS ucmc1 or ruxau7, why have I been running this setup for the past month with no issues!?
wraith79 said:
Well, if it NEEDS ucmc1 or ruxau7, why have I been running this setup for the past month with no issues!?
Click to expand...
Click to collapse
You will, or already have had issues you're not aware of.
Sent from my SAMSUNG-SGH-I727 using Tapatalk 4
wraith79 said:
Well, if it NEEDS ucmc1 or ruxau7, why have I been running this setup for the past month with no issues!?
Click to expand...
Click to collapse
Edited, UVMB1, the NEW Blaze 4G radio from this thread seems to work as well:
http://forum.xda-developers.com/showthread.php?t=1895400
But like x said, u had issues u just weren't aware of them. Problems don't just APPEAR for no reason.
this threads getting confusing.
ucmc1 and uxuma7 is for rogers and att users on cm10.1
if using unlocked skyrocket for other carriers then you would need compatible jb radio for the new/unlocked carrier for cm10.1 based roms
so for tmo/wind etc you would need UVMB1 for the AWS bands, there are other jb radios for telus, bell but don't know if/how well they work on said carrier.
so if your carrier uses the same frequency's as tmo then UVMB1 seems to be what users are reporting success with.
if your carrier is using same frequency as att/rogers then the ucmc1 or uxuma7 radio is what you need
correct me if im wrong
^^^ this is exactly what I said except in a more detailed explanation .
icenight89 said:
^^^ this is exactly what I said except in a more detailed explanation .
Click to expand...
Click to collapse
good, i just needed a confirmation so i can add that info and a link to this post in the radio section of the 1stop sticky
Hey guys
I recently got into the s3 (I know, I'm late to the game...)
I am using the latest elemental X from Nitro...and I love the ROM!
The one thing I noticed is that I can never get above 1 or 2 bars on 4g. Speedtests never go above 4 or 5 Mbps. However, My Bionic will do 25+ in same area.
Any suggestions where I should start investigating?
Thanks!
About the only thing I could suggest is to try another modem and rpm
docluv01 said:
Hey guys
I recently got into the s3 (I know, I'm late to the game...)
I am using the latest elemental X from Nitro...and I love the ROM!
The one thing I noticed is that I can never get above 1 or 2 bars on 4g. Speedtests never go above 4 or 5 Mbps. However, My Bionic will do 25+ in same area.
Any suggestions where I should start investigating?
Thanks!
Click to expand...
Click to collapse
How was your signal on stock ? ROMs don;t change the radio, so should be the same. Did you make any other changes?
DigitalMD said:
How was your signal on stock ? ROMs don;t change the radio, so should be the same. Did you make any other changes?
Click to expand...
Click to collapse
Hmm, to be honest, it seemed ok...
Here is what I did when I got the phone...
I ODIN's back to stock 4.1.2, rooted and unlocked bootloader.
Went into clockwordmod...wiped etc, installed elemental X, and gapps.
Should I have done the OTA update 1st?
I just checked the baseband version..., it says "I535VRBLK3"
Could that be it?
Elemental is aosp right ? If it is then that's you're answer . try a touchwiz ROM and you'll see the bars falling off your screen . tyres ROMs have to do with your signal . touch wiz ril will always be superior to aosp's ril.
docluv01 said:
I just checked the baseband version..., it says "I535VRBLK3"
Could that be it?
Click to expand...
Click to collapse
Your modem should be VRBMB1 , you are on an older modem/radio version
You should install the latest OEM verizon 4.1.2 full.
Then root and install the ROM you want.
The radio is the radio and custom ROMs shouldn't mess with your actual signal if you install via recovery, but GUI changes to the status bar may cause the display to be different.
Thanks....Thats exactly what I just did....
Stock ROM still giving lousy signal....speeds aren't that much better...
Ill try a touchwiz rom also...
docluv01 said:
Thanks....Thats exactly what I just did....
Stock ROM still giving lousy signal....speeds aren't that much better...
Ill try a touchwiz rom also...
Click to expand...
Click to collapse
And your modem version is? Data rates might get a little boost from some tweaked ROMs, but actual signal strength won;t, it simply doesn't because custom ROMs still run the stock modem and radio. And the stock ROM IS TW . when I run stock , I get 25+ mbs down in a 4g area, same as on Synergy custom, even when I have only 1 bar I get 10 mbs down
DigitalMD said:
And your modem version is? Data rates might get a little boost from some tweaked ROMs, but actual signal strength won;t, it simply doesn't because custom ROMs still run the stock modem and radio. And the stock ROM IS TW . when I run stock , I get 25+ mbs down in a 4g area, same as on Synergy custom, even when I have only 1 bar I get 10 mbs down
Click to expand...
Click to collapse
Hmm, forgive me, but which would be the modem version?
I put everything back to stock, rooted for now....
Thanks again my friend!
ive read that hte AOSP roms show less bars but get similar signla.
ive seen it in practice when with my mother.
check the signal strength on TW, then on AOSP and see if theyre equal. my moms stock S3 gets the same signal as my aosp phone does in our location.
Go here. Download the latest. It is an all in one. With the latest trust zone. It may alleviate your problems.
Or not.
I am running the PACMan ROM. And it shows less bars. Yes, it annoys the living daylights out of me. But, the speed is there when I use it and do speed tests. Any way, good luck.
http://rootzwiki.com/topic/34053-modemrpmtz-vrbmb1-verizon-sgs3-sch-i535-recovery-flashable/
Sent from my SCH-I535 using xda app-developers app
Jaytronics said:
Go here. Download the latest. It is an all in one. With the latest trust zone. It may alleviate your problems.
Or not.
I am running the PACMan ROM. And it shows less bars. Yes, it annoys the living daylights out of me. But, the speed is there when I use it and do speed tests. Any way, good luck.
http://rootzwiki.com/topic/34053-modemrpmtz-vrbmb1-verizon-sgs3-sch-i535-recovery-flashable/
Sent from my SCH-I535 using xda app-developers app
Click to expand...
Click to collapse
Thanks ! ill give it a try tonight....apprecviate the help!
Hi everybody
I download the CM10.1 alpha 9 to try this ROM but i've a strange problem.. before this version, i had the X-gamerz V3.1 without this disturb thing.
So, i'll try to explain with my poor english.. Sometimes, the signal is lost and i must reboot the phone to have it again. It's like if i'm in the airplane mode but with no chance to reverse that. I precise that i've full bargraph signal normally with the X_gamerz abd only 2 led on bargraph with CM10.1
Do you think i need a fix or this is a radio problem ? what can i do ?
Many thanks for your answer
Jeff
how did you flash it clean or dirty?
Sent from my GT-i9003 (cm10.1)(ehn3)