Database Info

Need a little help

Ok so i really want the new baseband on my g2x, i was waiting to see if a flashable would come out but so far nothing
i would like to know if these are the steps to get the baseband and root
1.Go back to stock
2.Get stock recovery
3.Download LG update tool (which i think is found here , http://www.lg.com/uk/support/mc-support/mobile-phone-support.jsp)
4.Let it do its thing
5.When its done flash cwm
6.Flash a rom with root
And done? and i would like to know if that baseband can be used on 2.2.2

Watch and follow this video to get you back to stock.
http://theunlockr.com/2011/05/23/how-to-unroot-the-t-mobile-g2x/
Then run the update.
Then NVFlash
Then rooted rom by Xboarder.
Then do whatever you want.

do i have to re root after i flash the rom

sTyLeSz said:
do i have to re root after i flash the rom
Click to expand...
Click to collapse
Go to the dev section and downloaded xboarders rooted rom that includes the update and root. It is a zip that can be installed the normal way after you NVFlash.
http://forum.xda-developers.com/showthread.php?t=1179748

in this theard it says i dont have to unroot or do cwm again
http://forum.xda-developers.com/showthread.php?p=15930756#post15930756

jcbofkc said:
Watch and follow this video to get you back to stock.
http://theunlockr.com/2011/05/23/how-to-unroot-the-t-mobile-g2x/
Then run the update.
Then NVFlash
Then rooted rom by Xboarder.
Then do whatever you want.
Click to expand...
Click to collapse
But you don't get new baseband with it, do you?

Also does the mew baseband work with 2.2?
Sent from my LG-P999 using Tapatalk

I nandroided to stock, unrooted, flashed stock recovery, updated to 2.3.3, using the horrible lg update tool. Then nandroided back to my to cm7 w/ Jul 15th baseband. All is well. Gps is fast as hell, locked in 10 seconds indoors to 4 meters.
Side note: i f#@ing hate the lg updater tool;( 45min of upluging and repluging my phone to get it to take the update. Horrible, i rather use odin.
Sent from my LG-P999 using Tapatalk

krekabl said:
But you don't get new baseband with it, do you?
Click to expand...
Click to collapse
After returning to stock, you run the LG update then you will have the new baseband. Then NVFlash. Then load the rooted rom.
Then you have new baseband and a rooted rom.

Help!

Soft bricked(total noob) just got the JIG, got into download menu.
Can someone give me instructions on how to get back to stock, gain root, and install custom ROMS/ MIUI
It be very appreciated, i'm doing this for a buddy and i don't want to give him a brick lol.

1. for restoring stock : http://forum.xda-developers.com/showthread.php?t=731989
2. use superoneclick to root
3. Install clockwork recovery and rom manager
4. Install custom roms.

Wait before you flash that, what firmware version did it come with???
It could mess your phone up if it isn't right.
Sent from my SGH-I897 using xda premium

b-eock said:
Wait before you flash that, what firmware version did it come with???
It could mess your phone up if it isn't right.
Sent from my SGH-I897 using xda premium
Click to expand...
Click to collapse
Pretty sure it came with 2.2 but not sure.

Then I wouldn't do that 2.1 Odin one click.... Look for a stock 2.2 Odin or Heimdall, make sure to read thoroughly too.

b-eock said:
Then I wouldn't do that 2.1 Odin one click.... Look for a stock 2.2 Odin or Heimdall, make sure to read thoroughly too.
Click to expand...
Click to collapse
See thats the thing i hate to be a pain but im looking for detailed instructions.

b-eock said:
Wait before you flash that, what firmware version did it come with???
It could mess your phone up if it isn't right.
Sent from my SGH-I897 using xda premium
Click to expand...
Click to collapse
thank you for pointing it out
OP might want to look at these threads:
http://forum.xda-developers.com/showthread.php?p=15330252
http://forum.xda-developers.com/showthread.php?t=963403
Note: as b-eock pointed out, make sure what was your stock version before restoring it!

I've always just flashed newer than my stock to avoid that problem and it always works well for me, after bricking or when i want to flash a new rom i flash to cappy gingerbread and flash boog kernal to get CWM(clockworkmod). CWM is essential is you plan on flashing to other roms. If you plan on flashing to another rom anyways it doesn't matter which version of stock you load as long as it work so I'd just flash 2.2 or newer.
http://forum.xda-developers.com/showthread.php?t=1300843
- this has all the odin 1-click flashable packages for captivate
To do everything you want to do...
flash back to stock, use 2.2 or one of the 2.3 versions. If you plan on flashing to a gingerbread rom (2.3) you'll most likely need the gingerbread bootloaders, if you don't originally flash a odin package with the gingerbread bootloaders you might be asked to install them later depending on what rom you use
incase you don't know odin is the computer program used to flash one click packages, you can find it by searching XDA, one click packages won't require it.
odin has to be open before you plug the usb into the phone putting it into download mode.
to flash to other roms you need CWM (ClockWorkMod-a customized recovery mode for the phone) the thread in this post has links to odin flashable kernals with CWM for each software build. To get CWM flash the respective kernal for the version you use. You'll need odin to flash the new kernal, its essentially stock apart from CWM. In odin select PDA and browse to the kernal zip to flash it.
you can search around XDA for oneclickroots, they will typically be odin or CWM flashable it's quite straight forward. New roms will typically already be rooted so you shouldn't have to root again.
good luck!

Does anyone know which exact ODIN i need to flash to get back to 2.2 from download mode.

You can use adamoutler's uckb2 heimdall one click. That's stock 2.2.

But whitch ODIN do i use.
Gez, HTC is so much easier then this samsung!

David522d said:
But whitch ODIN do i use.
Gez, HTC is so much easier then this samsung!
Click to expand...
Click to collapse
Unfortunately, there is currently no Odin one-click of stock Froyo (at least that I'm aware of). If you want stock Froyo, you'll need to either piece it together with full Odin, or use the Heimdall One-Click.

jmtheiss said:
Unfortunately, there is currently no Odin one-click of stock Froyo (at least that I'm aware of). If you want stock Froyo, you'll need to either piece it together with full Odin, or use the Heimdall One-Click.
Click to expand...
Click to collapse
*Update*
I flashed the 2.2 from this http://www.mobiletechvideos.com/blog/?page_id=186
Now i need to root and install recovery please SOMEONE HELP ME!!!! im so ****ty with this crap. Soon as i get recovery ill be straight.

David522d said:
*Update*
I flashed the 2.2 from this http://www.mobiletechvideos.com/blog/?page_id=186
Now i need to root and install recovery please SOMEONE HELP ME!!!! im so ****ty with this crap. Soon as i get recovery ill be straight.
Click to expand...
Click to collapse
Take a look in this post. That should get you the right 3E recovery.
Once you have that, you can either use ROM Manager to install CWM recovery, or see if you can find a kernel with it already baked in and use ODIN to flash the kernel (look for the speedmod kernel).
Or you could flash stock GB, but that updates bootloaders and is a whole different can of worms.

jmtheiss said:
Take a look in this post. That should get you the right 3E recovery.
Once you have that, you can either use ROM Manager to install CWM recovery, or see if you can find a kernel with it already baked in and use ODIN to flash the kernel (look for the speedmod kernel).
Or you could flash stock GB, but that updates bootloaders and is a whole different can of worms.
Click to expand...
Click to collapse
wouldnt it be better to root first? My focus is just getting MIUI on this thing

Another update.
I rooted the 2.2 im on and now enabled non market apps to be downloaded.
Can someone now tell me how to install recovery and install custom ROMS!
i know i know im annoying, im sorry!

David522d said:
wouldnt it be better to root first? My focus is just getting MIUI on this thing
Click to expand...
Click to collapse
Normally, the answer would be yes. However, as part of the Froyo update, AT&T managed to mess up the recovery menu, meaning that it won't flash unsigned packages. This makes getting CWM basically impossible without doing the steps in that post or flashing a different kernel.
You can root if you want to, but doing the steps in that post first will save you some headache.

jmtheiss said:
Normally, the answer would be yes. However, as part of the Froyo update, AT&T managed to mess up the recovery menu, meaning that it won't flash unsigned packages. This makes getting CWM basically impossible without doing the steps in that post or flashing a different kernel.
You can root if you want to, but doing the steps in that post first will save you some headache.
Click to expand...
Click to collapse
I already rooted =/ , should i still try this?

If you have full ODIN, go here, and download the kernel labeled "speedmod-kernel-i897-k13c-500hz.tar" at the end of the first post. Open Odin, and in the "PDA" slot, navigate to the .tar file and flash it. That will get you the speedmod kernel, which has CWM, which you need to be able to flash.
Once it's flashed, just hold V+/V-/Power until it reboots, and then you'll be in CWM and can flash MIUI.
I'm assuming you've backed up all your apps with Titanium Backup, right? If you haven't, do that before you do anything else so you don't lose them.

jmtheiss said:
If you have full ODIN, go here, and download the kernel labeled "speedmod-kernel-i897-k13c-500hz.tar" at the end of the first post. Open Odin, and in the "PDA" slot, navigate to the .tar file and flash it. That will get you the speedmod kernel, which has CWM, which you need to be able to flash.
Once it's flashed, just hold V+/V-/Power until it reboots, and then you'll be in CWM and can flash MIUI.
I'm assuming you've backed up all your apps with Titanium Backup, right? If you haven't, do that before you do anything else so you don't lose them.
Click to expand...
Click to collapse
Im not sure if i have "FULL" ODIN. I have the ODIN i just used to install 2.2. Then i rooted it using SUPER1CLICK.
Where do i get the full odin

No OTA after Root?

I used the 1-click method to root my phone. When I do the software update it goes as far as downloading the update, then my phone reboots. And for some reason when it reboots it reboots into recovery. Then I reboot my phone and when it loads it says update failed. The update is 2.3.5 to 2.3.6 I'm assuming. The reason I make this assumption is just because my wife and I got the same phone on the same day and hers updated and mine didn't. I rooted, she didn't. I read something about having to have all your original apps installed when I did a search, but I have removed any of the bloatware or any other apps as of yet. Thanks for the help in advance!

To Take the OTA you need Stock recovery, not CWM there is a thread with the Stock recovery you can flash in Odin to get the OTA to install
Check out this link to another post on here http://forum.xda-developers.com/showthread.php?t=1360943&highlight=stock+recovery+odin
this should be what you need to take the 2.3.6 OTA (which really isn't all that worth it, so if you're happy with 2.3.5 i would stay there until an ICS OTA comes)

Would a factory reset go back to stock recovery?

sumnerm1 said:
Would a factory reset go back to stock recovery?
Click to expand...
Click to collapse
No a Factory reset just resets the user data not the recovery or system information

scubamikejax904 said:
To Take the OTA you need Stock recovery, not CWM there is a thread with the Stock recovery you can flash in Odin to get the OTA to install
Check out this link to another post on here http://forum.xda-developers.com/showthread.php?t=1360943&highlight=stock+recovery+odin
this should be what you need to take the 2.3.6 OTA (which really isn't all that worth it, so if you're happy with 2.3.5 i would stay there until an ICS OTA comes)
Click to expand...
Click to collapse
My understanding was that 2.3.6 implemented a new modem that improved the performance of the phone. I personally have great service compared to my Tmobile that I just bought out my contact on. Just wondering how much better that update would make my phone.
Sent from my SAMSUNG-SGH-I727 using XDA

If your rooted you can just flash the 2.3.6 radio in cwm... Or even a 2.3.6 ROM (MHX superlite 3.1 final was my GB ROM of choice)
There is a radio thread and also info in the all in one sticky thread.
Sent from my SAMSUNG-SGH-I727R on Alien ICS #8

help pls! can i flash clockworkmod recovery files with odin??

ok so long story short i tried to flash my samsung infuse 4g with a rom from this website (ROM][Jellybean] CNA 3.5.0 for Samsung Infuse [PORT] ) i used to have froyo 2.2. all was well and then my phone just stopped working and wouldnt pass boot screen. but i saved my old rom's data with clockworkmod on my sd card. the thing is there are like 5 .tar files and i want to know if i can recover my old rom using odin since i cant even get passed the boot screen??? pls someone help me i'm freaking out, ive been googleing all night and i'm totally burnt out. the files i have are .android_secure.vfat.tar, cache.rfs.tar, data.rfs.tar, efs.rfs.tar, nandroid.md5 and system.rfs.tar...... pls someone show me how to fix my phone
thanks in advance

Don't think you can flash those files, but you should be able to go back to stock.
Sent from my sweet & buttery Infuse

Follow these instructions. I would use the zip that takes you back to stock with root.
Keep one thing in mind.....you CANNOT go from Froyo to JB.
http://forum.xda-developers.com/showthread.php?p=27286083#post27286083
I keep this thread bookmarked. I have soft bricked my phone so many times, it's not funny!!!
http://forum.xda-developers.com/showthread.php?t=1700416

Lack of reading/research caused your error :/
Anyways go back to stock with heimdall.or Odin, get red cwm again and you should be able to restore your backups
If you want to go to jb in the future....then you must first follow go to ics, then jb...you have to have ics before you can flash gb
Sent from my HTC PH39100 using Tapatalk 2

thanks again to all the comments, yes this was a big Noob mistake, i guess i was just way to excited to jump on the JB wagon. i have since returned to stock froyo using one of the kernals from this site (Stock_Root-Mod3e-UCKD5_Odin), so this is what i have now... although a little phased i still want to give this a second attemp. the rom i wanted to flash was [ROM][JellyBean] CNA 3.5.0 / Nightly 9/20 for Samsung Infuse [PORT]....
just to get things straight so i don't mess up again, i have to flash froyo with ics (is there a specific ics version i should get? on a how to guide on flashing jb i found this info: Entropy512's CM9 Kernel / Blue CWM Recovery 2012.05.02-ODIN-Entropy-CM9-zImage.rar) can i use this one, i prefer odin b/c i've never used heimdall. then after i flash ics then i can flash to jb.... but reading some threads i saw that....
"Currently on stock Froyo:
1) Use Heimdall or Odin to flash stock UCLB3 (GB)
*Reccomendation: Also flash GB bootloaders. See first post for links and warnings.*
2) Flash Entropy's DD kernel to obtain root and red CWM recovery.
Currently on stock GB:
1) Flash Entropy's DD kernel to obtain root and red CWM recovery."
do i have to do this step or can i go forward with the current Stock_Root-Mod3e-UCKD5_Odin that i now have installed....?
secondly, after i install ics, right before i flash jb it states i have to do an aroma prep....then flash jb.....
all flashes are done with clockworkmod and i wipe only cache and dalvik? or is there anything else i have to wipe?
sorry for all the questions, i have read and researched many threads but they are all pretty overwhelmingly full of lots of info.....just wanna get it in order....
thanks again
from froyo to ics i use odin, from odin to jb i use cwm, correct?

marielacvn said:
thanks again to all the comments, yes this was a big Noob mistake, i guess i was just way to excited to jump on the JB wagon. i have since returned to stock froyo using one of the kernals from this site (Stock_Root-Mod3e-UCKD5_Odin), so this is what i have now... although a little phased i still want to give this a second attemp. the rom i wanted to flash was [ROM][JellyBean] CNA 3.5.0 / Nightly 9/20 for Samsung Infuse [PORT]....
just to get things straight so i don't mess up again, i have to flash froyo with ics (is there a specific ics version i should get? on a how to guide on flashing jb i found this info: Entropy512's CM9 Kernel / Blue CWM Recovery 2012.05.02-ODIN-Entropy-CM9-zImage.rar) can i use this one, i prefer odin b/c i've never used heimdall. then after i flash ics then i can flash to jb.... but reading some threads i saw that....
"Currently on stock Froyo:
1) Use Heimdall or Odin to flash stock UCLB3 (GB)
*Reccomendation: Also flash GB bootloaders. See first post for links and warnings.*
2) Flash Entropy's DD kernel to obtain root and red CWM recovery.
Currently on stock GB:
1) Flash Entropy's DD kernel to obtain root and red CWM recovery."
do i have to do this step or can i go forward with the current Stock_Root-Mod3e-UCKD5_Odin that i now have installed....?
secondly, after i install ics, right before i flash jb it states i have to do an aroma prep....then flash jb.....
all flashes are done with clockworkmod and i wipe only cache and dalvik? or is there anything else i have to wipe?
sorry for all the questions, i have read and researched many threads but they are all pretty overwhelmingly full of lots of info.....just wanna get it in order....
thanks again
from froyo to ics i use odin, from odin to jb i use cwm, correct?
Click to expand...
Click to collapse
Follow all steps, don't skip a thing. As for wiping, wipe Cache, Data, Dalvik, and format /System when going from GB to ICS and ICS to JB. That UCLB3 file is Gingerbread stock and you have to go to gingerbread before you go to ICS.
Also, if you are confident that your phone won't get disconnected from Odin while flashing the UCLB3 file, flash the GB bootloaders while you're at it. If the flash fails while flashing bootloaders then your device is bricked so be sure about Odin before you flash them.
Sent from my SGH-I997 using xda app-developers app

Since you have already used Odin, I would use option "C". The best thing you can do is read everything two or three times. There are also many vids on YouTube that are helpful.
Once you are on GB.....just pick out any ICS ROM an flash it. Once it installs, I wouldn't even bother sitting it up and then you can go to JB.
Th3Bill uses an Aroma installer in his ROMs and the first time you use it, you will have to flash his aroma-prep first.
Hang in there....go slowly...and read. This gets easier and easier the more you do it. I always just d/l the zips to my phone and never even have to mess with the PC.
http://forum.xda-developers.com/showthread.php?t=1613523
Edit: All of his ROMs for the Infuse can be found and d/l at Jokersax.com
Edit: I just reread your post......once you are on GB, you won't use Odin again. You will use whatever ICS zip to flash your ROM using CWM. Same thing with JB.

Shawn said:
Follow all steps, don't skip a thing. As for wiping, wipe Cache, Data, Dalvik, and format /System when going from GB to ICS and ICS to JB. That UCLB3 file is Gingerbread stock and you have to go to gingerbread before you go to ICS.
Also, if you are confident that your phone won't get disconnected from Odin while flashing the UCLB3 file, flash the GB bootloaders while you're at it. If the flash fails while flashing bootloaders then your device is bricked so be sure about Odin before you flash them.
Sent from my SGH-I997 using xda app-developers app
Click to expand...
Click to collapse
okay i think i understand....never has my phone disconnected during a flash with odin, ive always gotten a straight pass...exactly how important are the bootloaders anyways? if failures happen b/c of faulty usb cords, then im good...if bricking happens b/c of "unlucky chance" then id rather avoid it.... either way ill start the whole process tonight after i put the kiddos away so i can concentrate 100%.
thanks again for the tips

dparrothead1 said:
Since you have already used Odin, I would use option "C". The best thing you can do is read everything two or three times. There are also many vids on YouTube that are helpful.
Once you are on GB.....just pick out any ICS ROM an flash it. Once it installs, I wouldn't even bother sitting it up and then you can go to JB.
Th3Bill uses an Aroma installer in his ROMs and the first time you use it, you will have to flash his aroma-prep first.
Hang in there....go slowly...and read. This gets easier and easier the more you do it. I always just d/l the zips to my phone and never even have to mess with the PC.
http://forum.xda-developers.com/showthread.php?t=1613523
Edit: All of his ROMs for the Infuse can be found and d/l at Jokersax.com
Edit: I just reread your post......once you are on GB, you won't use Odin again. You will use whatever ICS zip to flash your ROM using CWM. Same thing with JB.
Click to expand...
Click to collapse
okay, ill take ur advice and use option c. froyo to gb using odin and possibly bootloaders, then from gb to ics, ics to jb using cwm
wish me luck!

Bootloaders prevent Rainbow fault I guess you could call it in ICS. You don't have to flash them but its recommended. If you have any problems, post and you'll get help pretty quick.
Sent from my SGH-I997 using xda app-developers app

Shawn said:
Bootloaders prevent Rainbow fault I guess you could call it in ICS. You don't have to flash them but its recommended. If you have any problems, post and you'll get help pretty quick.
Sent from my SGH-I997 using xda app-developers app
Click to expand...
Click to collapse
so far so good, it seems i need to do the gb bootloader after all...got the rainbow screen....i have my gbbootloader file ready to go....only thing is i want to confirm where i put the file, i've searched and i can only find a procedure for heimdall not odin...do i put the md5 file in PDA or bootloaders?? also it says in heimdall to tick bootloaders, do i do the same in odin??? it also says to flash twice....?? ok im really not risking a hard brick, i'll be patient and wait
http://forum.xda-developers.com/showthread.php?t=1878458
i'll wait for your answer before i proceed....after this i'll continue to flash ics and then jb...
btw, am i supposed to flash ics twice?? that's what the [GUIDE] How To Flash JB says,
"9. Flash ICS Rom, then ICS Gapps"
but when i tried to flash ics a second time i couldn't (because of rainbow screen, and because it didn't show up in my directory....and where does ICS Gapps show up?
thanks again

If you downloaded the bootloaders linked in the guide, then yes, they go on the pda slot. You only have to flash once.
Heimdall-one click is the one you must flash once before it allows you to flash the bootloaders too.
Edit: to fully install ics you must flash twice, because I believe that what it does when coming from GB is that it just flashes the ics kernel on the first flash, requiring you to run it a second time after rebooting for it to install the complete rom.
Ics gapps are often linked in the rom OPs, although you don't need to flash them if you are headed to JB.
Sent from my sweet & buttery Infuse

andros11 said:
If you downloaded the bootloaders linked in the guide, then yes, they go on the pda slot. You only have to flash once.
Heimdall-one click is the one you must flash once before it allows you to flash the bootloaders too.
Sent from my sweet & buttery Infuse
Click to expand...
Click to collapse
That's odd, I flashed GB bootloaders in Odin from a rooted stock GB. But andros is right about going in the PDA slot. Maybe its just me that didn't have to flash with heimdall first.
Sent from my JellyBeaned Infuse, unofficial cm10

Shawn what I meant is that heimdall one-click wont allow you to flash bootloaders the 1st time, so you must run it once and then a 2nd time but with "flash bootloaders" ticked on.
There's no need to use heimdall before flashing them with Odin.
Sent from my sweet & buttery Infuse

Oh, I see what you mean. My mistake.
Sent from my JellyBeaned Infuse, unofficial cm10

Alright guys, I'm officially a jelly beaner!! Thanks again to all who replied and helped me out, couldn't have done it without your help everything seems to we working fine (with the exception of a few apps that aren't compatible, but they weren't that important ) only issue I have now is that I can't use my data plan and surf the web I configured everything just as I had it before according to my carrier and nothing ...... could it have something to do with the change in modem? When I scan for available network operators I get two options one says :NICMS and the other is just a number 71021... any ideas?
Also, when installing jb in the initial setup it asked which would be the defualt location to save I think I chose the sdcard instead of the emmc directory. ..can I change that setting?

I'm pretty sure you can change the setting, but not sure how. Also, your APNs might be messed up. There's a thread with working APNs. One sec and I'll link it.
Edit: http://forum.xda-developers.com/showthread.php?t=1791526
Sent from my JellyBeaned Infuse, unofficial cm10

Shawn said:
I'm pretty sure you can change the setting, but not sure how. Also, your APNs might be messed up. There's a thread with working APNs. One sec and I'll link it.
Edit: http://forum.xda-developers.com/showthread.php?t=1791526
Sent from my JellyBeaned Infuse, unofficial cm10
Click to expand...
Click to collapse
Thanks for the link Shawn, I looked it over, not sure it could apply since I don't live in the states.. but I'll use it as a start.

marielacvn said:
Thanks for the link Shawn, I looked it over, not sure it could apply since I don't live in the states.. but I'll use it as a start.
Click to expand...
Click to collapse
It probably won't but you never know.

how is [ROM][JellyBean][4.1.1]Unofficial CM10 - Updated CM10 9/14 Butter - MTD - OC Kernel working out? since ive gotten cna nightly my camera and video are extremly buggy, more than id like...what works and doesnt work in unofficial cm10

[Q] Rooting and CWM on infuse 2.3.6 GBread / UCLB3

I already have Gingerbread 2.3.6/ UCLB3 on my Infuse. How do I root and install CWM on the Infuse. All the guides seems to be upgrading to 2.3.6

pandroid4 said:
I already have Gingerbread 2.3.6/ UCLB3 on my Infuse. How do I root and install CWM on the Infuse. All the guides seems to be upgrading to 2.3.6
Click to expand...
Click to collapse
i thought in order to install gingerbread you have to be already rooted ???
i am not sure, but you can try download cwm from google play and choose the first option

g-noob said:
i thought in order to install gingerbread you have to be already rooted ???
i am not sure, but you can try download cwm from google play and choose the first option
Click to expand...
Click to collapse
Not necessarily, you could get 2.3.6 with Kies mini when ATT released it.
Look in this thread for guides to root. Read, read and read some more and make sure you have Heimdall or Odin on your PC. Follow guide to install correct drivers too.
http://forum.xda-developers.com/showthread.php?p=25111013
Sent from my SGH-I997 using xda premium

pandroid4 said:
I already have Gingerbread 2.3.6/ UCLB3 on my Infuse. How do I root and install CWM on the Infuse. All the guides seems to be upgrading to 2.3.6
Click to expand...
Click to collapse
read this thread:
http://forum.xda-developers.com/showthread.php?t=1524081
or this thread:
http://forum.xda-developers.com/showthread.php?t=1613523

Still Confusing. My infuse already has Gingerbread with UCLB3 installed( I bought this way). I just want to root and CWM installed. Any guides out there how to do it.

rooting and CWM on stock 2.3.6
Still confusing. This phone has stock version of Gingerbread 2.3.6 with UCLB3 firmware. I bought this way. I just want to root and Install CWM. ANy guides out there? This is not froyo and all the help out there shows how to go back to GB or upgrade to 2.3.6/ uclb3 ... like that. I already have UCLB3 firmware and why I need to install it again?

Probably because the links we provided had a rooted version of 2.3.6.
Sent from my SGH-I997 using xda premium

pandroid4 said:
Still confusing. This phone has stock version of Gingerbread 2.3.6 with UCLB3 firmware. I bought this way. I just want to root and Install CWM. ANy guides out there? This is not froyo and all the help out there shows how to go back to GB or upgrade to 2.3.6/ uclb3 ... like that. I already have UCLB3 firmware and why I need to install it again?
Click to expand...
Click to collapse
See post #2 or #3 in the first link qkster provided - these are Heimdall packages that will load a custom kernel/recovery with CWM. These will not reinstall the entire rom. Follow the instructions in post #1 if you are unfamiliar with Heimdall.
Or, if you are more comfortable using Odin see this thread and flash any of the three options in the OP that say "red CWM":
http://forum.xda-developers.com/showthread.php?t=1698367
**Before you flash the new kernel/recovery, visit the page shown below, download the first package under ARM devices, then copy the zip to your internal SD Card (if you are uncertain copy it to both).**
Home page for SuperUser - http://androidsu.com/superuser/
Direct link to SuperUser installer - http://downloads.noshufou.netdna-cdn.com/superuser/Superuser-3.1.3-arm-signed.zip
Once you have installed the custom kernel/recovery, let the phone sit for about 5-10 minutes - you will hear a voice coming from the phone - this is red CWM non-destructively reformatting your system, data, and dbdata filesystems from stock RFS to ext4 upon first reboot. It is important to let this process complete without interruptions. Once the phone boots, shut the phone down and boot into recovery then flash the SuperUser package... when completed reboot into phone OS and you are rooted.