Related
With this you can update your Gigabyte G1305 from 1.6 (donut) to (2.1 Eclair).
This is a vannilla version based on GigaByte RU ROM
This ROM work's in Optimus Boston, Orange Boston, Apanda A60 , WellCom A88 and many other clones.
Pre-requisits:
android-sdk
Windows x86
firetrapMOD1.0 Final
ChangeLog:
- ROOT
- GMS adicionados
- Market adicionado
- mkyaffs2image adicionado
- busybox
- FlashPlayer Lite
- FlashPlugin
- TouchPal PT-PT
- Removed Chineses dictionaries
- settings.xml modded
- setup Wizard in first Boot
- increased HSDPA for 1.5 Mbps
- Date displayed as dd-mm-aaaa by default
- dalvick=24m
- removed GPS-Tacker
- removed fileBroswer
- added Astro File Manager
- added galery from froyo (solve pixelization problems)
- removed RSS Feeds
- added Mms.apk (from nexus/froyo) better image compression
- removed Stock.apk
- facebook app updated
- Maps updated
- added App2SD
- removed GigaByte bootAnims
- removed chinese bookmarks
- BOOT.img (kernel at 600MHZ)
- removed alarm clock
- removed original clock
- removed boot sounds
- added notification bar.
- recovery 2.1 (Nandroid by Kong)-> with and app2Sd fix
- add firetrapMOD BootAnimation (credits: djtkd)
CREDITS: Kong (DroidSans) & djtkd (androidpt.com)
Download:
www.megaupload.com/?d=75CXDZWT
Pre-Requisits:
android-sdk
Windows x86
RUT 1.2.2 -> www.megaupload.com/?d=X7R89BCX
THE RUT DOESN'T WORK ON WIN_x64
Installation:
1- turn on the phone in recovery mode (camera + VOL up + power)
2- startup RUT and follow instructions
3- Optional - After all finished if it display's some "Force Close" or some error with aplications, its advised to do an factory reset.
Update from 1.6:
1- turn on the phone in normal mode and do an factory reset
2- turn on the phone in recovery mode (camera + VOL up + power)
3- startup RUT and follow instructions
4- Optional - After all finished if it display's some "Force Close" or some error with applications, its advised to do an factory reset.
Troubleshoot: if RUT doesnt detect the phone:
1- lturn on the phone in normal mode and go to the Virtual CD-ROM is mounted in My computer.
2- open and browse the virtual CD-ROM and copy "\RUT\Drivers" to the Desktop.
3- turn on the phone in recovery mode (camera + VOL up + power)
4- Open the Windows Device Manager and check if isn't a device ("Qualcom") with an installation error.
5- Update the Drivers and broswe to the drivers you have copied above.
6- After this just continue the normal installtion.
Installation App2SD
PS: I will not be responsabiled for damaged in SD card.
Do a backup before to this procedure.
Installation
1- turn on the phone in recovery mode (Vol up + camera + power)
2- choose "partition SD card" and follow instructions
3- back to the menu and choose "enable app2SD"
4- Reboot the phone
You can follow my work on http://www.androidpt.com/index.php?option=com_kunena&Itemid=3&func=view&catid=71&id=61476
nice one Keep the good work
+1
Good job.
I to am a happy user of this ROM and can testify it works 5*.
Great work firetrap!!
Cheers,
PL
Great wrok firetrap!
Works @ 100%!
Keep up
App2sd don't work for me. I have a 2gb sd card.
The update from 1.6 will also work with branded Orange 1.6 ROM ?
How is this any different from CMLMod 1.4? Does your 600 MHz kernel also default to the performance CPU scaling governor (less battery life)?
This one has "ondemand" for the processor by default, it's faster and it simply works.
I actually doubt it has ondemand by default as the kernel is the same 600 MHz "performance" kernel that everyone has. The ROM might be set up so that it uses SetCPU to set the CPU governor to ondemand on boot-up.
Hi...
i'm having trouble trying to instal this mod.
First my Phone doesn't do the factory reset, when reboots it freezes on the andoid logo, i left it like that more than 5min. and nothing.
Hard Reset it's no problem.
second problem when i try recovery mode it look like it freezes to on the same place as it freezes doing factory reset, only diference is the small letter on the top saying entering flash mode or something like that, than neither Rut or windows can't detect the phone!
Any ideias??
oh and my phone is an Optimus Boston from Optimus v1.6 unlock from the network
yes also works on Orange Boston
yOoMuRy said:
App2sd don't work for me. I have a 2gb sd card.
Click to expand...
Click to collapse
initial post updated, try the new method
nuno_mdj said:
Hi...
i'm having trouble trying to instal this mod.
First my Phone doesn't do the factory reset, when reboots it freezes on the andoid logo, i left it like that more than 5min. and nothing.
Hard Reset it's no problem.
second problem when i try recovery mode it look like it freezes to on the same place as it freezes doing factory reset, only diference is the small letter on the top saying entering flash mode or something like that, than neither Rut or windows can't detect the phone!
Any ideias??
oh and my phone is an Optimus Boston from Optimus v1.6 unlock from the network
Click to expand...
Click to collapse
the recovery mode in 1.6 its that it's nothing saying its recovery mode, its simply the android logo, just connect to the windows and follow the next procedure
bkraptor said:
I actually doubt it has ondemand by default as the kernel is the same 600 MHz "performance" kernel that everyone has. The ROM might be set up so that it uses SetCPU to set the CPU governor to ondemand on boot-up.
Click to expand...
Click to collapse
the ROM dont have setCPU installed by default (check the changeLog), the kernel its the original from Kong
bkraptor said:
How is this any different from CMLMod 1.4? Does your 600 MHz kernel also default to the performance CPU scaling governor (less battery life)?
Click to expand...
Click to collapse
first this a diferent ROM than the CML , the instalation method it's only 4 step's with RUT its all in an nb0 file.
second its a vannila version 100 Mb of RAM free.
the CPU scaling governor will be implemented in the next version
Здравствуйте я и России
Подскажите а можно в вашем mod оставить русский язык.
Хотел поставить его себе
Спасибо
App2sd still don't work for me...
can you please implement the italian language for the OS?
firetrap said:
initial post updated, try the new method
the recovery mode in 1.6 its that it's nothing saying its recovery mode, its
simply the android logo, just connect to the windows and follow the next
procedure
Click to expand...
Click to collapse
the problem is that the windows won't detect the phone, in the device manager the phone doesn't show up, i've tried the troubleshooting that you post, the phone
only appears in the device manager when in normal mode.
When trying the recovery mode the phone seems to freeze there, only removing the battery and the same happens when trying to make a factory reset(left it for more than an hour and nothing).
Is there any other method to try to instal your mod?
I hold no responsibility to how you use or not use this info and if you brick phone - you do this at your own risk
Mini How To
How to install recovery and custom ROMs
Changelog and Downloads
2011-02-11
IMPORTANT NOTE: I have not tested this ROM as I not own U8150 anymore
FILENAME: U8150V100R001C191B822_021211_094422.zip
MD5: 110c084c71729aca1ea8361dcb5fe5f5
* Reverted back to Launcher2
* Added Apps2SD
* Add couple apps I think is useful: wifi analyzer, android terminal, alogcat, cache cleaner-ng. (these can be easily uninstalled)
* Built with latest kitchen 0.120
* Removed Gingerbread keyboard and Google Goggles
2011-01-15
FILENAME: U8150V100R001C191B822_011511_221843.zip / Mirror
MD5: 357e5efb21d3272bb0820c0e14cfe913
* Added Boot Animation - Android Scribble 2.0 no flare
* Added Gingerbread Keyboard - Renamed Gingerbread Keyboard - updated 2010-12-28
* Unlocked Market - thanks xxhp for the package
* Added Google Goggles and AdFree
2011-01-09
This ROM should have overall better performance(hopefully)
Note:
Do a wipe of data and must clear dalvik-cache because of JIT being enabled (under 'wipe' in AmonRA Recovery 1.6.2 ROM)
FILENAME: U8150V100R001C191B822_010911_182214.zip
MD5: d8fae03567ebfa1602a116cc9e5aa587
* Added more ring tones from CM rom
* Ring delay fix
* CDRom symlink fix
* Fixed proximity delay (phone come off of the "black screen" faster)
* Turned Automatic brightness ON
* Now wifi will scan once every 1 minutes when not around a known location.
Help minimize battery drain.
* Added JIT
* Set Setup Wizard to run 'Optional'
2011-01-05 Initial Release
FILENAME: U8150V100R001C191B822_010511_014603.zip
MD5: 059fe7693164b1031a63fce373d57717
* Rooted (Superuser.apk + su)
* BusyBox installed
* /system/framework is deodexed
* /system/app is deodexed
* twitter/facebook/documents2go moved to /data/app
* swapped out Launcher 2 for Zeam Launcher
* Apps like Gmail, Maps, Vending etc updated.
If you like my work please make a donation via the Donate to me button on the left
Enjoy
Thanks for the update quail!
Do you have the AUS version of the Ideos? If so, who'd you get yours from?
Also, can we use this thread as a ROM request? (i.e. overclocking ability, gingerbread development)
Thanks. But can you plz post a guide or give a link on how to install the modified ROM in IDEOS for noobs like me
hachoo said:
Thanks for the update quail!
Do you have the AUS version of the Ideos? If so, who'd you get yours from?
Also, can we use this thread as a ROM request? (i.e. overclocking ability, gingerbread development)
Click to expand...
Click to collapse
Yes I have the AU version and I bought a Crazy Johns pack with 4GB micro HCSD carded included from Aus. Post for 159AUD. I was luck and go one that was not locked to any network.
Yes you can use the thread for ROM requests, I personally will be ignoring requests for OCing, as there is a very nice little app called setCPU which works great on the U8150.
[How to] install recovery and custom ROMs
I hold no responsibility to how you use or not use this info and if you brick phone - you do this at your own risk
Part 1 Installing Recovery ROM
Please refer to this post before flashing Recovery ROM - AmonRA Recovery 1.6.2 and BLUE Screen
The custom recovery allows you to do all sorts of lovely things such as installing ROM update zips (for the forthcoming custom ROMs), wiping various parts of the device, backing up and restoring and much more.
You can enter recovery mode - turn it off, then press the power button while holding the 'volume up' and 'send' (green).
Downloads
AmonRA Recovery 1.6.2 - DOWNLOAD (MediaFire Pro) / MIRROR (CoBlitz / ROMraid) - MD5: 65d4dcbbedb956a9f88dd1981fb31ef8
How to install - Windows, Linux and OSX
Download the recovery image of your choice above and extract the zip file
Put your device in bootloader mode - turn it off, then press the power button while holding the 'Volume Down' and 'End (Red)' keys
WINDOWS - double click 'install-recovery-windows.bat'
MAC - Open a terminal window to the directory containing the files, and type 'chmod +x install-recovery-mac.sh' followed by './install-recovery-mac.sh'
LINUX - Open a terminal window to the directory containing the files, and type 'chmod +x install-recovery-linux.sh' followed by './install-recovery-linux.sh'
Part 2 Installing Custom ROM
Note: When using the Custom Recovery image use the Trackball to move up / down and press to select. Use the volume down button to go back.
Download a Custom ROM of your choice and place the ENTIRE ZIP (Do not extract it) onto the root of your SD card. By "Root" I mean do not place the file in any subfolders
Enter recovery mode - turn it off, then press the power button while holding the 'volume up' and 'send' (green).
From Custom Recover Main menu and select the 'Backup/Restore' option. Choose a 'Nand backup' and let it run it's course
Return to the Custom Recover Main menu and select the 'Wipe' option. Choose the First option 'Wipe data/factory reset' and confirm. <- this is optional after installing one of my ROMs. I personally have not bothered with it with my ROMs
Return to the Custom Recover Main menu and select the 'Flash zip from sdcard'. Select the custom rom you wish to flash, confirm and wait.
Part 3 Restoring back to original ROM
Note: Upgrade operations will erase the user data.
Find and Download ROM from Link provided on WiKi that you want to install
Copy the entire dload folder (with UPDATE.APP in it) to the root directory of the MICRO SD card.
Make sure your handset is power off. Insert the MICRO SD card into the handset. Pressing the END key and VOLUME UP key, and then press the POWER key to power on the phone and enter the Software Upgrade Mode.
You can see process bar start from 0 on the screen. (this take a few minutes)
Then the handset will restart automatically. Then it is OK.
Reference:
Part 1 info taken from here
quail said:
Yes I have the AU version and I bought a Crazy Johns pack with 4GB micro HCSD carded included from Aus. Post for 159AUD. I was luck and go one that was not locked to any network.
Yes you can use the thread for ROM requests, I personally will be ignoring requests for OCing, as there is a very nice little app called setCPU which works great on the U8150.
Click to expand...
Click to collapse
I got the same deal!
Have you played around with the kernel at all? I'm not experienced in programming etc. but apparantly to OC the IDEOS U8150 more than 600mhz (setcpu does this automatically), it needs a kernel hack like other phones do.
Trekker56 said:
Thanks. But can you plz post a guide or give a link on how to install the modified ROM in IDEOS for noobs like me
Click to expand...
Click to collapse
Sorry I did think to add a how to install recovery/custom ROM how to, well there is one now.
Thanks
hachoo said:
I got the same deal!
Have you played around with the kernel at all? I'm not experienced in programming etc. but apparantly to OC the IDEOS U8150 more than 600mhz (setcpu does this automatically), it needs a kernel hack like other phones do.
Click to expand...
Click to collapse
I have played around with Linux Kernels in the past just not the Android kernel yet... but I am sure it not that hard to patch it and recompile.
I am happy with the 600MHz that setCPU unlocks it too.
quail said:
You can enter recovery mode - turn it off, then press the power button while holding the 'volume up' and 'send' (green).
[*] Put your device in bootloader mode - turn it off, then press the power button while holding the 'Volume Down' and 'End (Red)' keys
Click to expand...
Click to collapse
The Main thinkg about these two parts here, when i enter recovery mode i get a blue screen is that right... nothing BUT a blue screen.
When i try to enter the bootloader mode it stays on the IDEOS logo, the first one when you turn it on...
Also im guessing it has to be plugged into the usb at all times for these.
tankknat said:
The Main thinkg about these two parts here, when i enter recovery mode i get a blue screen is that right... nothing BUT a blue screen.
When i try to enter the bootloader mode it stays on the IDEOS logo, the first one when you turn it on...
Also im guessing it has to be plugged into the usb at all times for these.
Click to expand...
Click to collapse
You should not be getting a blue screen, you sure your using the correct key combination?
Yes you need the USB cable plugged in to use the bootloader. Yes the bootloader is ment to just sit at the IDEOS logo
yeah im 100% sure i used the correct key combo for the restore recovery mode, and sweet as for the bootloader, just wasnt 100% sure on that one.
Thank you OP for the info here, I used them to flash the recovery and I'm going to flash your ROM.
Having a Desire from the very first day I'm not new to these things, but this little boy is in my hands since this afternoon and it's amazing that you came with this just in time.
Will report back in a while with impressions.
OK, here I am. Just attempted to flash the ROM (after a full wipe), but it fails with an "Installation aborted." message just after the ISO symlink one. Looking at the update script, I guess there was a problem while flashing the BOOT partition.
Rebooting into the OS result in the new (rooted) ROM, but something is missing: the build.prop is likely the old one (I still see the old build string) and I have only 118 MB of free NAND space.
Coming from the Vodafone Italy ROM.
Any hint?
@ngel said:
OK, here I am. Just attempted to flash the ROM (after a full wipe), but it fails with an "Installation aborted." message just after the ISO symlink one. Looking at the update script, I guess there was a problem while flashing the BOOT partition.
Rebooting into the OS result in the new (rooted) ROM, but something is missing: the build.prop is likely the old one (I still see the old build string) and I have only 118 MB of free NAND space.
Coming from the Vodafone Italy ROM.
Any hint?
Click to expand...
Click to collapse
What package did you download? I forgot to test one my builds and aborted installation on me, but I have fixed it and already put up a work version. Please try the newer version
quail said:
What package did you download? I forgot to test one my builds and aborted installation on me, but I have fixed it and already put up a work version. Please try the newer version
Click to expand...
Click to collapse
Hi, I flashed "U8150V100R001C191B822_010711_042603", the one I guess is the newest (despite the "2010" typo on the first post ).
Is there a newer one?
@ngel said:
Hi, I flashed "U8150V100R001C191B822_010711_042603", the one I guess is the newest (despite the "2010" typo on the first post ).
Is there a newer one?
Click to expand...
Click to collapse
thanks, fixed the typo.
ATM there is no newer version.
@ngel said:
OK, here I am. Just attempted to flash the ROM (after a full wipe), but it fails with an "Installation aborted." message just after the ISO symlink one. Looking at the update script, I guess there was a problem while flashing the BOOT partition.
Rebooting into the OS result in the new (rooted) ROM, but something is missing: the build.prop is likely the old one (I still see the old build string) and I have only 118 MB of free NAND space.
Coming from the Vodafone Italy ROM.
Any hint?
Click to expand...
Click to collapse
Another thing I am not sure what the diff is between the Italian ROM and the Australian ROM. I wonder if you phone is not fully compatible with the Australian ROM?
ARGH, ok not good...
booted up to flash my loving ideos and i think i killed it...
'Firemware update step 1/2
Unpacking
[=============] (thats a progress bar
!
update failed
and all my buttons are blinking...
First version working
I had the same problems as @ngel using the newer version. Fail with the iso symlink.
Used the first version you posted up and that worked without a problem.
Zeam Launching is really snappy. Or I just haven't bogged down my phone with a whole bunch of crap yet.
Thanks for your work I bought my Ideos through 2 Degrees in New Zealand.
Request:
I quite like the look of the black notification bar and green icons. Would you be able to theme this rom with those? Also could you include the gingerbread keyboard. I know I can install it separately but would be cool to have Touch Pal and the original keyboard removed and replaced with the gingerbread one.
tankknat said:
ARGH, ok not good...
booted up to flash my loving ideos and i think i killed it...
'Firemware update step 1/2
Unpacking
[=============] (thats a progress bar
!
update failed
and all my buttons are blinking...
Click to expand...
Click to collapse
Did you power on your unit holding the 'volume up' and 'red' key?
GooApple V5+ : iPhone 4/4S Replica
Everything you need to know about it !
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
____________________
UPDATE : ADDED CMWR 6.0.2.7
____________________
Review Videos
GooApple V5+ Review by AndroidSale
Official GooApple V5+ review
http://v.youku.com/v_show/id_XNDc1MzAwMTIw.html
____________________
Specifications
System
Model: GooApple V5+
Processor: MTK MT6575, 1Ghz - ARMv7
Operating System: Android 2.3.6
Kernel: Linux v2.6.357 ([email protected]) (gcc version 4.4.3 (GCC) )
Ports: 3.5mm Earphone Jack and mini USB
Launcher: iLauncher modified
Partition: MTD
Display
Resolution: 960x640 pixels
Density: 1920x1280
DPI: 320.0
Screen size: 3.5"
Color support: 16 million colors
Functions: Touchscreen, Multi-Touch, Retina
Camera
Front Camera: 1.3 MP
Back Camera: 8 MP
Functions: Flashlight, Zoom, Auto Focus, Scene mode, ISO adjustment, Time Face Detection
Connectivity
Carrier: Unlocked
Network band: GSM 2G: 850/900/1800/1900 MHz and WCDMA 3G: 2100MHz
Data: GPRS, EDGE, HSPA
Message: SMS, MMS, Email
Bluetooth: Bluetooth 2.0
WLan: Wi-Fi IEEE 802.11 b/g/a
USB: USB 2.0
GPS: GPS, built-in GPS chipset (EPO and AGPS)
SIM: Micro SIM card (Single)
Phone Book: More than 10000 contacts
Browser: HTML, Safari
Battery
Type: Built-in Li-on battery ; 1050mAh
Standby Time: 120-150 hours
Talking Time: 3-4 hours
Memory
Built-in Memory : 512 MB
External Memory : 8GB/16GB/32GB (optional : SDcard)
RAM: 512 MB
Phone Model
Replica: 1x1 iPhone 4/4S replica
Dimensions: 115h - 58.6w - 9.3d (mm)
Weight: 135g
Other Features
Button: Mute Button just like iPhone
Video Player: AVI, MP4, 3GP, MOV, MKV, FLV
Audio Player: MP3, FLAC, APE, OGG, AMR, AAC, WAV, AWB
Images: JPG, PNG, BMP, GIF
E-book Format: TXT, CHM, DOC, HTML
Ring Tones: Original iPhone 4 ringtones
Play Store: Google Play Store
Radio: FM Radio
Sensors: Gravity Sensor, Proximity Sensor, Lichtsensor, Accelerator Sensor
Recovery: Stock recovery is E3
Languages
English, French, German, Spanish, Portuguese, Russian, Arabic, Indonesian, Italian, Malaysian, Turkish, Vietnamese, Thai, Chinese
Accesories
1x GooApple V5+ Phone
1x Travel Charger
1x USB Data Cable (I suggest buying a new one)
1x Headphone (if plugged in, both the phone & headphone give sound)
1x Screen Protector (optional)
1x iPhone Skin Case (optional)
- ALL ORIGINAL IPHONE 4/4S CASES, RECHARGERS, HOLDERS, ... ARE COMPATIBLE
____________________
How to Root
This was a hard & long trial to get this phone rooted. Though, it's a very simple way found by me and yuweng, thanks bro!
Based on yuweng's tutorial : MT6577 CWMR Root Updated V2[/b]
Download these and follow the tutorial:
ADB.zip - http://www.mediafire.com/?11cbu388oqu8amw
All the Drivers I could find - http://www.mediafire.com/?wfr5fgkxkdau6w4
CWMR Recovery's.zip - http://www.mediafire.com/?2r30o428558h22q
MTK Rom Studio 1.1.77.146.zip - http://www.mediafire.com/?h22puc8kac6axv7
SP Flash Tool v2.1134.00.zip - http://www.mediafire.com/?ob5caeigzc1ga10
SP Flash Tool v3.1224.0.sn85.zip - http://www.mediafire.com/?5u29nf4fp4omw9n
Root_Superuser_3.1.3_Busybox_1.20.2-Update1-signed.zip - http://www.mediafire.com/?fee3e7cta5mg3fp
- Setting up the folders and phone (to make it easy)
1. Create a folder in C:\ called "GooApple"
2. Extract all the ZIP files EXCEPT "Root_Superuser_3.1.3_Busybox_1.20.2-Update1-signed.zip" to "C:\GooApple\" so you have 6 folders in GooApple.
3. And copy "Root_Superuser_3.1.3_Busybox_1.20.2-Update1-signed.zip" to "C:\GooApple\"
4. I prefer doing a factory reset before doing this.
* Factory reset can be found at Settings > General > Privacy > Factory data reset > Reset phone
5.Now enable Unknown sources, USB debugging and Stay Awake.
* Unknown sources can be found at Settings > Store.
* USB debugging and Stay Awake can be found at Settings > Store > Development.
6. Make sure all drivers are installed properly. Some might install when connecting the USB.
7. Turn off your phone and unplug your USB cable from the phone (Let the USB be in your computer/laptop)
- Backup your own recovery (not required but suggested)
8. Open "Flash_tool.exe" from version "3.1224.0.sn85".
9. Click on File > Open Scatter-loading file, then browse to "C:\GooApple\MTK Rom Studio 1.1.77.146" and open "MT6573_Android_scatter.txt".
10. Click on the Read back tab (top). (If there is anything in the list, please Remove it.)
11. Click on Add and double click on the ROM_1.
12. Now type recovery.img at Filename, then browse to "C:\GooApple\MTK Rom Studio 1.1.77.146\SPFT_UPLOAD" and click Save.
13. In the popup, select
* Type: Hex
* Read Method: Read Page Only
* Start Adress: 0x980000
* Length: 0x00500000
And click Ok
This info can be found when loading the Firmware.info in MTK Rom Studio
14. Click on Read back. Now hold the "Volume -" button and insert the USB in your phone. It should say OK at the end.
Now you have a backup of your original recovery.img in case you want to restore it.
- Installing CWM Recovery (REQUIRED FOR ROOTING!!)
14. Go to the CWMR Recovery's folder, then choose if you want the Standard CWM or the Touchscreen CWM and copy the recovery.img included to "C:\GooApple\MTK Rom Studio 1.1.77.146"
* Standard CWM is controlled by Volume up and down. Touchscreen CWM is controlled by both.
15. Open "Flash_tool.exe" from version "2.1134.00".
16. Click on Scatter-loading and browse to "MT6573_Android_scatter.txt" in MTK Rom Studio and open it. (Click OK on the popup)
17. Now make sure everything is unchecked EXCEPT "RECOVERY". (Don't forget that your phone should be turned off and unplugged.)
18. Now click on download and insert your USB cable. It should say OK at the end.
Now you have CWM Recovery installed.
- Rooting the phone
19. Start your phone and connect to USB Storage Mode.
20. Copy "Root_Superuser_3.1.3_Busybox_1.20.2-Update1-signed.zip" to the ROOT of your SDcard. And turn off USB Storage (but keep your USB in)
21. Now boot your phone into recovery mode. There are 2 methods, I prefer method #2 as it's more safe and works most often. (Someone's phone kept vibrating while doing method #1)
* Method #1:
- Shut off your phone (wait untill it vibrates to make sure it's completely off).
- Hold the "Volume +" button and the "Power" button.
- You now are in recovery or your phone keeps vibrating.
* Method #2:
- With your phone on, start "cmd.exe" as administrator on your PC.
- Type "cd C:\GooApple\ADB" (without the "") and press enter.
- Type "adb reboot recovery" (without the "") and press enter again.
- Your phone shall reboot in recovery.
22. In recovery, select "install zip from sdcard", then "choose zip from sdcard" and select "Root_Superuser_3.1.3_Busybox_1.20.2-Update1-signed.zip". Select "Yes - Install ..."
* Recovery Controls (Standard CWM)
Volume + = UP
Volume - = DOWN
Power = Select
Home = Go to +++++Go Back+++++
23. Once completed, select Go Back, and select wipe data/factory reset.
24. Now select "reboot system now".
And here we go... Your GooApple V5+ is Rooted !
Thanks again yuweng for the support !
____________________
How to Increase Internal Memory - INT2EXT method (ROOT required)
"INT2EXT on MT6575 / 77 for the extreme gamers !" for GooApple V5+ thanks to yuweng !
- NOTE: THE PHONE TENDS TO BE SLOWER AS IT HAS TO LOAD FROM THE SDCARD
Based on yuweng's tutorial : http://www.mediafire.com/view/?7zjz4onhos826bk
Download and/or install and extract these:
MiniTool Partition Wizard (Home edition) - http://www.partitionwizard.com/download.html
INT2EXT-mtd.7z (Includes install-recovery.sh) - http://www.mediafire.com/?16psto1xqw4b0s0
Notepad++ (To edit install-recovery.sh) - http://notepad-plus-plus.org/download/v6.2.3.html
ES File Explorer File Manager - https://play.google.com/store/apps/...sMSwxLDEsImNvbS5lc3Ryb25ncy5hbmRyb2lkLnBvcCJd
BACKUP YOUR GOOAPPLE V5+ WITH CWMR
1. First I installed and opened MiniTool Partition Wizard and mounten my SD card (32gb & Class10) with going in USB Storage Mode.
2. In MiniTool Partition Wizard, I selected my drive and resized it from 29gb to 26gb (FAT32).
3. Then I selected the remaining 2.5-3gb and created a new partition : Primary , Ext4 , 4kb. Don't forget to click Apply at the top left.
4. Then I extracted INT2EXT-mtd.7z and installed Notepad++.
5. With Notepad++ , I opened install-recovery.sh and changed unbind to bind in lines 61, 66, 71 and 98. Then saved it.
6. Now I copied the EDITED install-recovery.sh to the root of my /sdcard/ (Location when you open your phone).
7. Having ES File Explorer File Manager (EFEFM) installed, give it Root acces via the Settings at the bottom (check everything at root settings).
8. Next, select install-recovery.sh in EFEFM and copy it to /system/etc/ and give it full read/write/execute acces.
9. After this is done reboot your phone. For me, after the first boot it just shutted off. So then I had to power it on again and I had 2.6gb internal memory.
Hooooorah ! :good:
Thanks again yuweng for the files, info, tutorials and time !
Proof
____________________
Change BOOT logo to iPhone's Apple
So this will change the boot logo of your GooApple from an Android logo to Apple logo.
The things you need:
The boot images - http://www.mediafire.com/?363hvgcmw46wl6w
ES File Explorer File Manager or Root Explorer
1. Extract the iphoneboot.zip to your /sdcard/ so you have /sdcard/system/logo/...
2. Open the file manager, browse to /sdcard/ and copy the system folder.
3. Next go to the root of your phone and change the permissions to R/W.
4. Now paste the system folder here so it overwrites the system logo files.
5. Reboot your phone and voila, now you have the iphone boot !
____________________
Tips&Info
- Make 3 backups of your phone through CWM Recovery because some might get corrupt.
- Use Titanium Backup Pro or a similar tool to remove unused/chinese system apps.
- The MTK6575 can be compared to the PowerVR processor. So the PowerVR games work on the GooApple V5+.
____________________
Custom Recovery *.img
CWM Recovery v6.0.2.7 - Standard Version (MTD partition)
CWM Recovery v6.0.2.7 - Touchscreen Version (MTD partition)
TWRP Recovery - Touchscreen (MTD partition) : Make sure when doing a backup you choose "External".
____________________
Change BUILD.PROP for more compatibility of Apps&Games
Your phone is being recognized as a Android Alps phone which a lot of apps don't even recognize.
So the best thing you can do is change your "build.prop" a little to increase the compatibility.
For example, yesterday I bought N.O.V.A. 2 which says it's not compatible (but it is).
1. Open Root Explorer or something similar.
2. Go into /system/ folder. Make sure the folder is R/W.
3. Press and hold on build.prop then select "Open in Text Editor".
4. Next, change the following.
- ro.product.model=GT-I9000
- ro.product.brand=samsung
- ro.product.name=GT-I9000
- ro.product.device=GT-I9000
- ro.product.board=GT-I9000
- ro.product.manufacturer=samsung
5. Then go back and it will ask you to save it. Save it.
6. Now reboot your phone and try again with more compatibility !
____________________
Useful Downloads
Android
- ES File Explorer File Manager - Tool to browse your folders and copy/paste/delete - Free
- Older MobileUncle Tools - This version is better for changing the recovery via a tool. (name: m44tools.apk, it also includes the 2 recovery's for this phone) - Free
- MobileUncle Tools - Special tool for MTK Android Devices - Free
- MobileUncle Flashlight - App to switch on/off the flashlight - Free
- Pimp My Rom - Awesome tool which has settings to increase for example your phone's internet speed !
- Explorer (or Root Explorer) - Tool to browse your folders and copy/paste/delete - Free or $
- Titanium Backup (or Pro) - Tool to backup/uninstall apps (also for system apps) - Free or $
Computer
- Xmedia Recode - Tool to convert videos to compatible videos for GooApple V5+ (Use iPhone 4 preset)
CLICK TO BROWSE OFFICIAL ROMS
This is the original ROM that comes with the phone : https://dl.dropbox.com/u/76038325/Gooapple_V5_Plus_ROM_A116A_V1.0_P2MB3_20121110.rar
To check which ROM version you need, dial *#2170#*.
The number didn't work for me but they said it works at the official GooApple site. I used A116_4S to update my phone.
IF YOU FOUND SOMETHING OR JUST WANT TO ASK SOMETHING PLEASE FEEL FREE TO POST BELOW
I really want to thank the following people:
yuweng - Always helping me out with troubles.
bigrammy - Giving me the tip to use an older version for doing a Download in SPFT.
The phone can be bought at Android-Sale.com
What I wish to do with this phone and might need help for:
ROM (standard and v5+4s_a116_ios_root_12.11.16_Launcher)
- Get GPS to work on my phone. (Still don't know if it's just me or the phone.)
- Change the USB Storage Mode image to something like the iPhone by editing Framework-res.apk.
- Increase Internal memory by taking System's memory.
ROM (v5+4s_a116_ios_root_12.11.16_Launcher only)
- Remove all the chinese icons in "Google Pinyin IME" keyboard and add AZERTY for Belgium and France.
GooApple V5+ Manual
Thanks to "Q" for looking up this valuable information !
How to take a screenshot:
Tap both the "Home"-button and "Power"-button simultaneous. If you have sounds activated, you'll hear a shutter sound.
How to force restart:
Deep at the bottom of the 3.5 headphone jack there is a restart-button. Use a small tool like a bent paperclip or toothpick to reach it.
You can use this restart-button if your phone freezes and can not be restarted using the normal power-button.
THIS IS A LIFESAVER !
Recovery-menu explained:
The Recovery-menu is a boot-menu that can be used to backup, restore, clean cache or change ROMs in your GooApple phone.
This menu can be either in English or Chinese and may vary slightly depending on what type of Recovery came pre-installed on your phone.
You can install a different Recovery-menu on your phone like CMWR / TWPR
To access the Recovery-menu:
- Turn off your phone.
- Press and hold the PLUS-button and POWER-button on your phone until you arrive at the recovery menu.
NOTE: Depending on ROM and Recovery-version, you may actually need to press MINUS-button and POWER-button to access the Recovery-menu
Factory-test-menu:
This can be used to test the hardware functionality of your phone.
To access the Factory-test-menu:
-Turn off your phone.
-Press and hold the PLUS-button and POWER-button on your phone then lose it and hold it again after the vibration.
NOTE: It doesn't always work so you really need the perfect timing.
Navigating the user-interface:
This menu you can close running apps on the background so pretty usefull sometimes.
- Double-tap the "Home"-button shows running/standby apps and possibility to close apps by long-pressing icons in deployed menu.
- Double-tap the "Home"-button at the unlock-screen will show you the music player and a button to quickly acces the camera.
- Hold the "Home"-button to acces Wallpaper and Settings faster.
- Pressing the "+"-button when using the camera will take a picture.
NOTE: Double tapping must have some kind of pace in pressing these 2. If you do it too fast, ut doesn't work.. but too slow, it doesnt work either, so it has to be right.
- "Long-pressing" an icon in the menu makes the icons jiggly so you can change the position of your icons by dragging them to a desired position or on another icon to create a folder.
- "Long-pressing" the MINUS-button can bring up a menu in some applications. - UNCONFIRMED
Trouble hanging up a phone-call?
- Holding the phone vertically during a call turns off the screen (if the light-sensor has been covered).
- Holding the phone horizontally for a few seconds, will turn the screen on again and display the "End call"-button.
NOTE: Make sure you never double-tap the "Home"-button during a call. It will minimize the calling session so you will still be calling in the background. So make sure you always press the "End call"-button.
Change user interface language
If you cleared user data when installing a new ROM, the phone is likely to boot up in Chinese. Follow these steps to change it back to English:
- Press the Settings-button (you can probably identify this by its icon).
- Select the 9th option (General)
- Select the 8th option (International)
- Select the 1st option (Select language)
- Select your language.
NOTE: If you want some influence of your native language, you can install MoreLocale2 from GooglePlayStore. Some apps will be in your native language.
How to change the IMEI-number:
To change the IMEI number, you most likely will have to use MTKdroidTools from MediaFire.com.
It has an option to change the IMEI number but for this, you will need:
- the ADB drivers to be installed.
- A new IMEI number with what you want to change the original one.
- Phone connected to your computer.
How to add more Ring, SMS, Notification - sounds on your GooApple:
- Connect the phone to a computer in USB Storage Mode.
- Create the following folders on your SD-card:
- Ringtones
- Alarms
- Notifications
- Move your own sounds into the appropriate folder.
- Adjust the sounds-settings on your phone here:
- Ring-tone: Settings>Audo profiles>General>Voice call ringtone
- SMS-tone: Settings>Auido profiles>General>Notification ringtone
- Alarm-tone: Enter your Clock-app and add a new alarm and you should be presented with ringtone-options.
How to remove the backcover and change the MicroSD:
You might want to remove the backcover to change the MicroSD card or maybe even to change the cover.
To remove the cover:
- Unscrew the 2 screws at the bottom of your phone. You need a special screwdriver for this.
- Slide the back cover up once the screws are removed.
To change the MicroSD:
- Having the cover removed, you will see the SD card to the left of the battery trapped in some aluminium cover.
- Slide the aluminium cover to the left and now you can remove the SD card.
To put the cover back on:
- Put the cover back in its place, then drag it down (instead of up to remove it).
- Put the 2 screws back
Thanks mate! Very helpfull
AShacks said:
Thanks mate! Very helpfull
Click to expand...
Click to collapse
No problem !
And can anyone with a GooApple V5+ please try this to fix the GPS signal?
1. Charge your phone completely (100%)
2. Download and install Mobileuncle MTK Tools from Google Play.
3. Go to Settings > Location Services and turn off everything here. Also turn off WiFi.
4. Now turn off your phone. Then turn it back on and enable WiFi.
5. At Settings > Location Services
- Enable : Use wireless networks.
- Enable : Use GPS satellites
- Enable : GPS EPO assistance -> Go into EPO Settings and check the EPO file info if it's downloaded, if not, make sure you're connected to the internet and uncheck/recheck Auto Download.
- Enable : A-GPS
6. Open Start Mobileuncle MTK Tools and go to Information and click on Full , then Cold and go back to Satellites.
7. Go outside/window/balcony and after a while, the red dots should become green.
Source: peterssson
They say it works for MTK 657x models but it doesn't work for me. I keep getting red dots instead of green.
Drivers
Hi,
My Gooapple V5+ arrived.
I'm quite lost since no manual inside and this is my first android.
Regarding the rooting issue, I first decided install drivers. As I read, the process is connecting USB to PC and wait for Windows to ask something and then navigate to MT6575 USB VCOM drivers forder.
However, Win7 recognized V5+ as an Android device and installed some drivers, including "My HTC" (?)(!)
Now I can access SD card and maybe something else (I have no idea what) but I can't connect to internet through USB
The big quiestion now for me, in order to root the phone, is how to install drivers properly, bcos we have:
drivers preloader MT65xx
Android ADB Interface
MT6575 USB VCOM drivers
usb_driver
usb_driver_MT65xx_Android_ZTE_v821
I have a Win7 x64 laptop
About the GPS, I have just attempt fix my possition with "MAPS", but despite I downloaded some file, I can't fix possition bcos I'm indoors now.
Thanks for any comments
I'm not sure how the USB thetering works but I'll look into it.
About the drivers. I do it like this: plug it in, then choose the DRIVERS folder and let it choose automaticly.
Android device is correct, but I haven't seen the HTC one though, I'd recommend uninstalling that one.
But really , it can do a lot if you just plug it in, let it search the driver automaticly (don't select any specific folder, just DRIVERS if you really need to).
Also the VCOM driver is more for when you're about to flash your recovery through SPFT which it will install automaticly.
If you need any "personal" help on rooting it, feel free to ask, I'll support you via skype/facebook/teamviewer.
And I too am using Win7 64bit
It seems that Win7 installs a Google pack of USB drivers when detects Android devices.
Maybe this one I found:
softpedia.com/get/MOBILES/Google/Google-USB-Driver-Revision4.
And bcos GooApple is not in the list, Win7 chooses HTC that has 6575 chip aswell.
I will try to uninstall "My HTC" but Windows prefer this to any in the DRIVERS folder, perhaps is more up-to-date.
Any way, automatic driver download/installing maybe problematic with this phone.
Thanks a lot for support. I will need some days to become familiar with the phone before the next level
Thank you, is a very useful guide ! :good:
"Q" said:
It seems that Win7 installs a Google pack of USB drivers when detects Android devices.
Maybe this one I found:
softpedia.com/get/MOBILES/Google/Google-USB-Driver-Revision4.
And bcos GooApple is not in the list, Win7 chooses HTC that has 6575 chip aswell.
I will try to uninstall "My HTC" but Windows prefer this to any in the DRIVERS folder, perhaps is more up-to-date.
Any way, automatic driver download/installing maybe problematic with this phone.
Thanks a lot for support. I will need some days to become familiar with the phone before the next level
Click to expand...
Click to collapse
Ehm it shouldn't say GooApple V5+ in device manager.
For me it says Android Phone > Android ADB Interface and when I turn on USB storage, I just get Portable Devices: G:\.
So yeah, strange it uses HTC. And sorry that I cannot explain properly how to install the drivers because I just installed a few drivers , uninstalled some and installed some other and it worked.
But the most important thing is that the VCOM driver is installed. Which will automaticly install once you try the *Read Back* method. OR this might work too:
Turn off your phone. Plugin the USB cable in your computer but not in the phone (yet).
Now hold the Volume + button and then insert the USB cable into your phone. I think now, it should install the VCOM drivers automaticly.
And no problem Anhuc ! I haven't had time to test some things as I'm in a period of getting a job for the rest of my life
Drivers Problem Fixed!!
Well, for some reason my V5+ only accept VCOM driver if press "+" when plug-in USB in phone OFF, as you suggested.
If connect USB to PC with phone "ON" it ONLY accepts Android ADB Composite Interface, as you said.
So thanks everybody for suggestions and comments. I thing the first challenge overcome :good:
PS:
About the HTC driver I had first, maybe it was bcos I had MOBILE-EDIT software, wich installs many drivers, so I had to remove it from ControlPanel/Pograms/Unistall
But after it, connected phone to PC and it installed automatically "My HTC" driver again
So removed driver from DeviceManager and also removed Google Android USB Package from PC execiting "pnputil.exe -e" in command prompt, to see the OEM# of package, then removed with "pnputil.exe -d Oem#.inf"
Seems extrange but works great. (see details here: technet.microsoft.com/en-us/library/cc730875.aspx)
I have taken some screen shots of this in case someone need.
Hope may help people with persistent drivers....
"Q" said:
Drivers Problem Fixed!!
Click to expand...
Click to collapse
Good to hear that Q and thanks for sharing the information on what was causing it !
It can always help someone else out who has the same issue.
Anyways, I guess you can get to the part of flashing the phone with CMWR right?
I suggest jus reading the first part of the Rooting untill installing CMW and start there as thats the basic thing you need to do as the files I uploaded already include the patched recovery.img.
To see some pictures, check this out : http://www.mediafire.com/view/?8mxvy0ey5yfdu59 page 16 thats basicly how to Download recovery.img to your phone. But always follow my tutorial or ask me to do it for you
GPS without signal
Yes, I downloaded averything from v5+ tutorial and carefully read and understood this excellent work.
However, manage GPS to work is my priority now.
Is there any light in the dark?
I tried and tried, downloaded EPO files, used MTK Tools and even installed an iGo My Way version compatible with Retina screen.
One hour in the field and only saw a little signal bar of one satellite (if it was a satellite) but no points (red or green) at all in MTK Tools.
Have someone seen at least a single pretty point in the grid?
Thanks for any help.
"Q" said:
Yes, I downloaded averything from v5+ tutorial and carefully read and understood this excellent work.
However, manage GPS to work is my priority now.
Is there any light in the dark?
I tried and tried, downloaded EPO files, used MTK Tools and even installed an iGo My Way version compatible with Retina screen.
One hour in the field and only saw a little signal bar of one satellite (if it was a satellite) but no points (red or green) at all in MTK Tools.
Have someone seen at least a single pretty point in the grid?
Thanks for any help.
Click to expand...
Click to collapse
Ooh thanks for helping out.
I do get red dots yeah but they don't turn green :/
Things you could try is
Download GPS Status & Toolbox : Launch GPS Status & Toolbox. You'll see a compass and some other stats. Hit the menu button for more options.
Make sure you have an active data connection and go to "Manage A-GPS State". Then, tap the "Download" button in the menu that pops up. When it's done, exit the app.
And another thing that made me come closer was changing the gps.conf but I dont remember what tool to use. You can do it manually though. (It's located in system/etc)
For Belgium
NTP_SERVER=be.pool.ntp.org
XTRA_SERVER_1=http://xtra1.gpsonextra.net/xtra.bin
XTRA_SERVER_2=http://xtra2.gpsonextra.net/xtra.bin
XTRA_SERVER_3=http://xtra3.gpsonextra.net/xtra.bin
# DEBUG LEVELS:
# 0 - none, 1 - Error,
# 2 - Warning, 3 - Info
# 4 - Debug, 5 - Verbose
DEBUG_LEVEL =0
ACCURACY_THRES=5
INTERMEDIATE_POS=0
ENABLE_WIPER=1
SUPL_HOST=supl.google.com
SUPL_PORT=7276
REPORT_POSITION_USE_SUPL_REFLOC=1
# blank
Click to expand...
Click to collapse
bOyka8 said:
Ooh thanks for helping out.
I do get red dots yeah but they don't turn green :/
Things you could try is
Download GPS Status & Toolbox : Launch GPS Status & Toolbox. You'll see a compass and some other stats. Hit the menu button for more options.
Make sure you have an active data connection and go to "Manage A-GPS State". Then, tap the "Download" button in the menu that pops up. When it's done, exit the app.
And another thing that made me come closer was changing the gps.conf but I dont remember what tool to use. You can do it manually though. (It's located in system/etc)
For Belgium
Click to expand...
Click to collapse
Okay!
At least I have the dots in grid.
8 satellites in red but no singnal bars :/ after 30 min with all assistance enabled and filter off.
It's very strange, all my GPSs (I have 4 more devices) can get possition from cold in less than 20 min,
Some firmware issue here, I pressume.
I will contunue with this...
bOyka8 said:
Anyways, I guess you can get to the part of flashing the phone with CMWR right?
I suggest jus reading the first part of the Rooting untill installing CMW and start there as thats the basic thing you need to do as the files I uploaded already include the patched recovery.img.
To see some pictures, check this out : http://www.mediafire.com/view/?8mxvy0ey5yfdu59 page 16 thats basicly how to Download recovery.img to your phone. But always follow my tutorial or ask me to do it for you
Click to expand...
Click to collapse
Ok, I need the V5+ rooted to get access to system/etc....
After reading e/t in tutorial, just a stupid question: " I will loose all changes after flashing, and will need to begin again with configurations?"
I think I know the answer
"Q" said:
Ok, I need the V5+ rooted to get access to system/etc....
After reading e/t in tutorial, just a stupid question: " I will loose all changes after flashing, and will need to begin again with configurations?"
I think I know the answer
Click to expand...
Click to collapse
I don't think so, you can still do it without losing everything.
Just flash the recovery.img, then install the rooting zip and you're good to go !
And if you need help rooting this baby, I can do it for you in 2 hours from now
bOyka8 said:
I don't think so, you can still do it without losing everything.
Just flash the recovery.img, then install the rooting zip and you're good to go !
And if you need help rooting this baby, I can do it for you in 2 hours from now
Click to expand...
Click to collapse
I managed to do a recovery.img of my last configuration.
All ok, except that phone hangs after the OK green circle on PC screen.
Non responding at all, all black.
But reset from 3.5mm jack and all ok again.
Will do another backup from factory setings, just in case...
what happens after installing CWM Recovery?
can work as normal with phone?
Thanks for 2h supporting
problem!!
bOyka8 said:
I don't think so, you can still do it without losing everything.
Just flash the recovery.img, then install the rooting zip and you're good to go !
And if you need help rooting this baby, I can do it for you in 2 hours from now
Click to expand...
Click to collapse
Well, something bad happened.
Afetr the backup opperation tha finished OK, it has a wrong behaviour with battery icon.
Sometimes show the pugged icon and others a ray inside.
When turn off, it finish ok and then vibrates, but a few seconds later the battery icon charging fills the scren (unplugged of course) and few seconds later disappears.
Not a big problem, but after it I tried a second backup after factory settings restore and this time when plug USB on phone while pressing "-" nothing happens. PC do nothing (not installing drivers as before) and flash_tool can't finish the last part of procedure.
I even used differnt cable but nothing. USB parameters are as suggested....
Please help!
Thanks
"Q" said:
Well, something bad happened.
Afetr the backup opperation tha finished OK, it has a wrong behaviour with battery icon.
Sometimes show the pugged icon and others a ray inside.
When turn off, it finish ok and then vibrates, but a few seconds later the battery icon charging fills the scren (unplugged of course) and few seconds later disappears.
Not a big problem, but after it I tried a second backup after factory settings restore and this time when plug USB on phone while pressing "-" nothing happens. PC do nothing (not installing drivers as before) and flash_tool can't finish the last part of procedure.
I even used differnt cable but nothing. USB parameters are as suggested....
Please help!
Thanks
Click to expand...
Click to collapse
Are you using the correct version of SPFT?
For read back you need the v3... (use -) for download you need v2.... (dont use -)
And yeah with this recovery, and root everything works the same !
fixed
bOyka8 said:
Are you using the correct version of SPFT?
For read back you need the v3... for download you need v2....
And yeah with this recovery, and root everything works the same !
Click to expand...
Click to collapse
Fixed!!
Nothing worked to make it responding to USB...
Cables ok, config of USB ok too....
Decided opening phone and release power from battery cables.
I have never did it before but succeed on it
Now repeated opperation and made a successful backup in factory settings
Again I had to reset from 3.5mm jack
All ok, no problems (perhaps battery icon, but not sure)
Will continue rooting later
Star B943 (B94M) MTK6589 Quad Core 4.5Inch 1GB RAM 4GB ROM Dual Camera 5.0MP+12MP WCDMA 3G Dual SIM Card SmartpPhone
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Please pay attention, there are two versions of this devices on the Market!!!
One is with Dualcore and the other one is with Quadcore MTK6589.
So be carefully with Flashing and Rooting the devices.
There is already some progress with CWM and Root on German chinamobiles.org Forum.
-------------------------------------------------------- Testing LeWa Port Rom -------------------------------------------------------------------------------
Update 07.05.2013: LeWaport_Star_B94M_22.05.13_cm08
My friends here comes a new LeWaport (cmod08) based on the stable release for Amoi N828.
If your already on lewa simple make backup, install cmod08.zip, wipe dalvik and cache after install, all others look instructions below.
Known bugs: Wifi nvrambug, with my fix bluetooh is only working after factory reset or resore data.
Update 07.05.2013: LeWaport_Star_B94M_08.05.13_cm04
Dear friends of LeWa here is a Test version based on LeWa Amoi N828
This version is rooted with gapps, no need to load these.
Hints for install:
1. Boot to CWM or TWRP Recovery
2. Make backup including boot and recovery ( TWRP 2.5.0.0 will be installed )
3. Wipe System partition
4. Install LeWaport_Star_B94M_07.05.13_cm03.zip
6. Reboot and be happy
Known errors: some chinese apps and strings, noLED patch still needed
Further steps: bugfixing, try to port multilanguage support (don´t hesitate to help )
New logo needed
-------------------------------------------------------- Hints for 4.2.1 -------------------------------------------------------------------------------
Update 03.05.2013: Batterylive improvement
User slein has submitted selfcoded apk for LED Fix ! Thanks to him!!!!
There are a lot of activities to fix sporadical battery drain. Following APK seems to be workaround install the app and disable LED notification with widget. Thx to all testers!
Good Batterytool
Update 26.04.2013: Japanese 4.2.1 JB-image from needrom
Well running 4.2.1 from needrom
for most users, please read carefully instructions, do backup (Titanium and/or CWM/TWRP) before update
and make Factory reset as described, to avoid most problems!
Howto Root 4.2.1 and GPS-Fix by JBrandtner
---------------------------- Hints for 4.1.2. --------------------------------------------------------
Update 18.04.2013: Wifi Mac change Fix ( Thx to okupka )
- use these file (make backup before!!!) with this guide and you are done
Update 12.04.2013: Different Sound improvements
People who have problems with sound try this link from Zopo-Forum
or from Patchworkoftips
Update 11.04.2013: Data Resize partition to 2.74GB Detailed description from here
1. We backup with recovery.
2. Unloaded and 2.74GB decompressed data (Thx to spanish friends! ).
3. SP Open Flashtool and as we have done before installing the recovery in scatter-loading MT6589_Android_scatter_emmc.txt select the file in the folder where we unzipped 2.74GB Data
4. We ensure that only EBR1 and EBR2 are marked.
5. We Give to Download, accept the prompt, connect via USB the phone off the PC. As with the recovery if the process fails, disconnect the cable, remove and put the battery and repeat this step.
6. If all goes well, will back the green circle. Disconnect the phone from the PC.
7. Now we go back to recovery (Turn on the phone by holding the power key + volume +).
8. In the recovery do wipe data / factory reset.
9. Optionally if you want to restore the data and installed applications we advance restore, choose the backup you made in step 1, and finally we give to Restore data.
10. Reboot from recovery. In this first boot after repartitioning we may see a notification saying the phone storage is damaged, then click in it. It will show a dialog box asking if you want to format the SD card, does not refer to the External SD but the phone's internal memory, so we do not fear clicking on Format. After doing the latter, voila, you have the Data partition (where apps are installed) extended to 2.74GB
Update 08.04.2013: 3G improvement
if phone is already root
Install from market the mobileuncle tools.
-> enter engineer mode (MTK).
-in modemtestactivity change "factory" for "telephone".
-in "band mode" GSM mode uncheck the "PCS1900."
New TWRP 2.4.4.0 Recovery available here
Update 03.04.2013: Networklocation Fix
by radekfor: i think i solved cell location problem.
Simply install latest Gapps for JB 4.1.2
Click to expand...
Click to collapse
http://goo.im/gapps/gapps-jb-20121011-signed.zip
-> boot to Recovery ( Mobileuncle Tools, or Quickboot,.... ) -> Install zip from SD-Card , ....
Update 28.03.2013: Working on JB 4.1.2
Here you go at your own risk
Drivers;
CWM 5504 and Root here;
German instruction here
New SP_Flash_Tool_v3.1304.0.119
After extracting the zip file:
1. Debug Mode in the Developer Tools Switch
2. Install the drivers ( others may work better, e.g. pdanet )
3. The superuser-313-arm-signed.zip from third copy to the external SD card
4. Phone off and take out battery
5. using the SPFTools load in directory 2. Scatterdatei -> load and Recovery.img, boot.img and flash (press download and then return battery back)
6. Disconnect the data cable after green OK
7. When switching power and Vol + hold when the Green Man comes release Power and Vol + hold on.
8. In CWM now make complete backup, after this install zip from SDcard install the superuser zip ... JB 4.2.1 may need other tools look here found by #90
9. skip step 7 +8 and install superuser using the MTKdroidtools and make backup (but it takes a relatively long time)
10. You can now delete with MTK Droidtool some China-apps."
PS: Backup Rom made with SPFtools->readback
Thanks for the alert.
I've got a quad core 6589 version, so far cannot find a way to root it..
And it's NetworkLocation.apk is missing, i tried a couple of NetworkLocation.apk from JellyBean gapps zip files, no one seems to work, either not installable, crash on boot or not working.
3G connection seems to be dodgy, H/H+ is shown on the top bar but data is not coming down normally, during 1 minute, only less than 100k data come down and not able to load even 1 page...
Anyone has the same problem?
Cheers,
Fish
star b943 (mtk6589 b94m)
could someone translate recovery menu from Chinese Language
Yes the baseband or antennas seems to be crap.
Start download and remove your hands from the device or take it only with two fingers on the upper side, then my downlads finish and downloads show normal values. Speedtest with upload is seems to be fine,...
If someone needs root or cwm write me pm, or give me public upload location I´m not so experienced with this,...
Best regards
Thanks for the advice
radekfor said:
could someone translate recovery menu from Chinese Language
Click to expand...
Click to collapse
Translate into:
-Factory Reset
-Auto (Overall?) Test
-Manual (Overall?) Test
-Single Function Test
-Test report
-Clear eMMC
-Version Info
-Reboot
Hope this helping.:laugh:
how do you think about the Star N9589?
with same quad core cpu mt6589
haisir said:
how do you think about the Star N9589?
with same quad core cpu mt6589
Click to expand...
Click to collapse
The MT6589 is really good stuff, for me its my personal Favorite , but I would prefer smaller devices with 4-4,7" max screensize.
5,5" and higher does not really fit in any shirt pocket. If I ever have to carry a bag for my phone I would prefer a tablet with much better screens and battery life.
So i´m looking forward to Jiayu G4, G5, UMI X1S, or something similar screensize
cmoegele said:
Update 28.03.2013:
Here you go at your own risk CWM 5504 and Root
Best regards
Click to expand...
Click to collapse
That's great!!!!
Thanks, it worked!
Now I still have two problems:
- amazon app-shop doesn't start (it remains black with amazon logo)
- doesn't vibrate on call in vibration mode
does someone else have the same problems?
Thanks
B94M/B943 quad
Thank you everyone for your hard work and time. I have very little experience (twice with well established models)
I was wondering if someone could clean up the txt instruction translation so someone like me can avoid brick making. Even adding better detail would be sweet. I will copy below. Thanks in advance.
"ATTENTION: The Star B94M is available as dual and quad core version!
The tools here refer exclusively to Star B94M MTK6589 or B943 quadcore devices!
After extracting the zip file:
1. Debug Mode in the Developer Tools Switch
2. Install the drivers
3. The superuser-313-arm-signed.zip from third copy to the external SD card
4. Phone off and take out battery
5. using the SPFTools load in directory 2. Scatterdatei -> load and Recovery.img, boot.img and flash (press download and then return battery back)
6. Disconnect the data cable after green OK
7. When switching power and Vol + hold when the Green Man comes release Power and Vol + hold on.
8. In CWM now either only make complete backup, or install zip from SDcard install the superuser zip ...
9. skip step 7 +8 and install superuser using the MTKdroidtools and make backup (but it takes a relatively long time)
10. You can now delete with MTK Droidtool some China-apps."
bradstallion said:
That's great!!!!
Thanks, it worked!
Now I still have two problems:
- amazon app-shop doesn't start (it remains black with amazon logo)
- doesn't vibrate on call in vibration mode
does someone else have the same problems?
Thanks
Click to expand...
Click to collapse
vibration problem was a wrong setting by my side... still have problems with amazon app-shop (very strange, I've it installed on many devices and different versions of android, jelly bean included)
angryfish99 said:
Thanks for the alert.
I've got a quad core 6589 version, so far cannot find a way to root it..
And it's NetworkLocation.apk is missing, i tried a couple of NetworkLocation.apk from JellyBean gapps zip files, no one seems to work, either not installable, crash on boot or not working.
3G connection seems to be dodgy, H/H+ is shown on the top bar but data is not coming down normally, during 1 minute, only less than 100k data come down and not able to load even 1 page...
Anyone has the same problem?
Cheers,
Fish
Click to expand...
Click to collapse
The MTK chipsets have always been weak on data connection starting from the MTK6573. It's so bad that connection can be lost while my Samsung right beside it has a good connection.
Anybody knows what is wrong with this China made phones?
Star
I managed to root. Thanks for the help guys (sarcasm).......The files that "cmoegele" posted worked except for the usb driver files. I had to use PdAnet for connection. I'll be watching to see what other members find on the camera focus and poor data comms.
Thank You
Data upload is stable, and downlad has good values for a while, but slows down from time to time. So I think the device is not doing completly wrong. There needs to be still some finetuning in Baseband and Rom like man other devices always need.
The performance and quality is really good, even +2 days Batter lifetime is a good value for this powerful device.
I´m waiting for new Roms
fmehrtens said:
I managed to root. Thanks for the help guys (sarcasm).......The files that "cmoegele" posted worked except for the usb driver files. I had to use PdAnet for connection. I'll be watching to see what other members find on the camera focus and poor data comms.
Thank You
Click to expand...
Click to collapse
Hi fmehrtens, may I know the RAM and ROM capacity of your phone model? I am wondering if 8GB ROM and 1GB RAM model can be rooted using same method, thanks.
Spec says 8GB ROM and 1GB RAM, however AnTuTu shows only 1GB ROM and 1GB RAM. Am I missing anything here?
Hello,
I've ordered this new phone Star One B943 Quad core, and i want to thank u for the rooting method ^^
I'm searching for the ROM stock, does anyone have the idea where i can find it ?
And i found that the Miz Z1 is the same phone, but with Android 4.2.1 installed. Do u think it's possible to upgrade the Star OS version with the Miz Z1 firmware ?
B934
windwaver said:
Hi fmehrtens, may I know the RAM and ROM capacity of your phone model? I am wondering if 8GB ROM and 1GB RAM model can be rooted using same method, thanks.
Click to expand...
Click to collapse
It is a 4G ROM and 1G RAM. Just FYI, the first time I tried to root it did not root, I had to try it a couple of times, and then I also loaded the ZIP file on the ROM memory along with the SD card. It worked that time. Not sure if that's what helped or not. The phone is a really nice phone ecpecially after rooting. I am also having trouble with Amazon App store app, Netflix playing too slow and the camera focus.
Good Luck and Thanks!
Neodragon12 said:
Hello,
I've ordered this new phone Star One B943 Quad core, and i want to thank u for the rooting method ^^
I'm searching for the ROM stock, does anyone have the idea where i can find it ?
And i found that the Miz Z1 is the same phone, but with Android 4.2.1 installed. Do u think it's possible to upgrade the Star OS version with the Miz Z1 firmware ?
Click to expand...
Click to collapse
I have got a Copy of the origin Rom done with SPFTools. If it is needed. You also can use the Scatterfile from the zip-file.
Do you have a link for the 4.2.1 Miz Z1 firmware ? Perhaps its a fake,...
Otherwise I will flash it to our device except the Preloader, so if it fails I could go back to stock.
cmoegele said:
Data upload is stable, and downlad has good values for a while, but slows down from time to time. So I think the device is not doing completly wrong. There needs to be still some finetuning in Baseband and Rom like man other devices always need.
The performance and quality is really good, even +2 days Batter lifetime is a good value for this powerful device.
I´m waiting for new Roms
Click to expand...
Click to collapse
May I know the country you using the phone in? I have very bad experience with MTK chipsets with regards to data transfer. Other phones e.g. Samsung, LG do not give me this problem.
How to improve the data performance?
Infocus M810/T/U thread. (Also wth interesting things for m812 holders.)
Infocus m810 thread on facebook
Note:
All roms on this page are remade to use with Infocus m810 so don't flash on m812. MULTILANGUAGE
Bootloader unlock (m812/m812):
Custom recovery (m810/m812):
SUT flashable images (SUT Factory tool 3.0.8):
SUT 3.1.4 cracked.
Video tutorial SUT flashing on Android 6
ROMS M812(A/I) VN2/PHX:
Android 5.0.2 m812 OFFICAL sut. (Suitable for m810 too) to be used with SUT
cm13 for m812(a) http://forum.xda-developers.com/showpost.php?p=68355126&postcount=1110
ROMS M810(T/I/U):VNA
25/07/16 CM13 beta 2 (release) http://forum.xda-developers.com/showpost.php?p=67901403&postcount=1074
20/03/16 Android 6 custom ROM (ported from m812 ver 617A firmware)
23/02/16 Android 6 custom ROM (ported from m812 ver 6130 firmware)
27/12/15 Android 5.1.1 (internal version 511C(D updated)) (port from m812 ver 511C firmware)
Official Android Kitkat 4.4.2 (VNA-1640-0-00WW-A02)
Older roms
Older ROMs are designed for recovery installation and need some knowledge:
Before the installing of thiose ROMs you must be common with Adb/fastboot driver and installation. working fastboot.exe and adb.exe here
Im the author of this work. So feel free to ask and report.
All you install from here is on your responsibility.
m810.ROM Android 5.0.2: (October 2015) MULTILANGUAGE.
This ROM is full upgrade, so its able to install over Android 4.4.2 ROMS.
How tot install: Russian installation site
1. Put the zip file to sdcard.
2. Connect phone by USB cable. Press and hold volume down+power buttons
(10s), when phone restarts, release power button after vibrating and keep
holding volume down button until FASTBOOT message appear on screen.
3. Download boot recovery https://yadi.sk/d/v_LrtBVdk8pAj and place in fastboot/adb
folder
4. Run in cmd: fastboot boot tw101_recovery_repack_by_titovich.img
5. When recovery booted, Choose firmware UPDATE502_M810_v1.zip and
install.
In the end you should get this error: apply parsed perms lsetfilecon from
/cache to u_object_r:cache_file:s0 failed operation not supported on transport
endpoint set_metadta: some changes failed.
Ignore it. Its issue of recovery.
6 Besides, ROOT and Xposed for 5.0.X framework preinstall can be copied to
sdacard and installed same time after rom installed from boot recovery.
7. Hold power button 10 sec and reboot.
Enjoy.
5.0.2 DOWNLOAD
m810.ROM Android 5.1.1A 08/10/15 The beta version of Lollipop
5.1.1A
ROM from official 511A m812.
Same install instructions as above
Main changes
-Wifi reception better;
-GPS;
-Added buttons config, e-compass, g-sensor calibrations to display menu .
5.1.1 DOWNLOAD.
XPOSED for 5.1.1 . ROOT
Note Xposed from version 5.0 and 5.1 are different!
To flash via SUT:
ODEXED ROM Android 5.1.1B 11/15 The beta version of Lollipop
5.1.1B from official m812 511B update ROM. |For SUT installer. With
unbricking feature.
- ROM designed for odexed files so it contains resized partition for system
(by titovich). means one you install the partition table will remain - 2.5gb for
system. original system parttion is less 2gb. You will be able to install all
m810 roms but I noticed you.
-not for XPLOSED framework. The ROM is full odexed. So don't try Xposed it
will fail;
-minor changes from my side diff to previous ROM;
-fixes from Infocus to battery life.
bugs: haptics not working for hard buttons (to be fixed)
To be installed via SUT utility SUT 3.0.8: DOWNLOAD
-install SUT (drivers will be installed with SUT);
-download zip with nb0 image. Unzip.
-open nb0 image file in SUT.
-Check "Normal Download" and "Erase data".
-Download ignore warning messages.
-Flash will complete in less than 1 min.
5.1.1B for SUT DOWNLOAD LINK2
EOL
Tweaks and enchantments :
M810 service manual
http://forum.xda-developers.com/showpost.php?p=68520451&postcount=1123
Edit boot logo m81X
http://forum.xda-developers.com/showpost.php?p=68956713&postcount=1163
Other party hears the noise durine the phone call
build.prop file
persist.audio.fluence.voicecall=false
Secret codes:
*#*#4636#*#*, *#*#653837#*#*, *#*#76278#*#* Settings.
Note, never tap "USA Band", otherwise you will need to reflash modem part or firmware to make phone back to work.
*#*#873#*#* Upload service
*#*#225#*#* Calendar
*#*#2324636#*#* , *#*#232#*#*, *#*#23273#*#* ,*#*#233#*#*, *#*#231#*#*, *#*#2324678#*#* CDA
*#*#278#*#* CPUDaemon
*#*#324#*#* DebugCfg
*#*#368#*#* Device manager
*#*#3721#*#*, *#*#6721#*#*, *#*#372#*#*, *#*#672#*#*, *#*#4867#*#* High Temperature Monitor
*#*#744#*#*, *#*#628#*#* Mobile Assistant
*#*#787#*#* PackageUsageTool
*#*#227#*#* Pandora Box
*#*#272#*#* Permission Control
*#*#33546#*#* Permission Detection
*#*#793#*#*, *#*#795795#*#* Power Detective
*#*#795#*#* power Monitor
*#*#277#*#*, *#*#3277#*#* Stability Monitor
*#*#28274663#*#* TeleService
Themes pack for 511B/C:
http://forum.xda-developers.com/showpost.php?p=64725810&postcount=429
Disable buttons backlight. (pale blue led shine instead). ROOT needed.
Replace system\lib\hw\lights.msm8974.so to get rid of buttons backlight. Instead, PALE blue led will be on.
Don't forget to backup the original file.
Advanced users can control that API /sys/devices/virtual/input/touch/light_led (with echo 0,1)
There is no any other control to disable or enable it.
XPOSED framework can't do anything too
Noise fix. When party on other side is claiming on noise above your voice.
This is typical issue of dual mic QUALCOMM devices on 5+ Androids. Edit built.prop
persist.audio.fluence.voicecall=true change to false
Enable DIAG port for QXDM (QPST). Rooted.
adb shell
su
setprop persist.sys.usb.config diag,serial,mass_storage,adb
Increase speaker volume
http://forum.xda-developers.com/showpost.php?p=64566136&postcount=330
Sound volume mod working on m810
https://www.youtube.com/watch?feature=player_embedded&v=DOo7sT_JIs8
IMEI, Serial number, MEID, MAC, BT changer. Service tool (m810/m812) DANGEROUS!!!
https://drive.google.com/open?id=0B3Wy4Ok3qGszcmZlMDFCbGdwUjQ
I was trying to follow up this conversation on 4pda but i don't speak russian and google translate does a terrible job.
So a couple of questions:
Is this a multilanguage rom?
Does 2g-3g-4g work?
What about wifi?
Thanks.
will Infocus m810 get android 5.1???
there is an ota update for m812 to android 5.1 but i am unable to find the file.
My phone its on the way.Im interesting this thread
sknipas said:
I was trying to follow up this conversation on 4pda but i don't speak russian and google translate does a terrible job.
So a couple of questions:
Is this a multilanguage rom?
Does 2g-3g-4g work?
What about wifi?
Thanks.
Click to expand...
Click to collapse
Yes, its Multilanguage.
2g-3g-4g work
sknipas said:
there is an ota update for m812 to android 5.1 but i am unable to find the file.
Click to expand...
Click to collapse
If you find it, pls share, it can be used for further development.
@ heineken78
Thanks for coming here at XDA
I am daily following your good works at 4PDA and I am actually with Titovich's 5.02 rooted and i feel more than satisfied.
I take the opportunity to send you my grateful Thanks.
I will install the new update and let comment as well. I hope and wish the system repartitioning will not give any issue ( I don't like playing with root partition!!).
Question: Was not possible to make the system file as lean as possible , eg removing apk that are unnecessary or available at Playstore for everybody choice in order to avoid this modification.
Regards
good work bro. looking for rom based on 5.1 . following this thread
lolo9393 said:
@ heineken78
Question: Was not possible to make the system file as lean as possible , eg removing apk that are unnecessary or available at Playstore for everybody choice in order to avoid this modification.
Regards
Click to expand...
Click to collapse
Stock reserved place in m810 for system partition is ~1,6 gb. Making firmware less, won't bring any changes, unless repartitioning it to lets say 1,1 gb. This operation needs lot of system knowledge from people who will install it.. And profit of changes will be only 500 mb? is nothing.
m812 has partition of 3 gb, that's huge, but suitable for oxdexed roms.
repartition means- you need to change start sectors of emmc in order to set sizes of system, cache. Everything before those partitions remain the same.
Ok, tweak as promised
http://forum.xda-developers.com/showpost.php?p=63576292&postcount=2
Wow,wonderful news... i will test it,downloading...
Hi Guys!
I would like to ask that ROM by titovich, which languages contains?
Thanks
@ heineken78
I've just finished the new Rom install. I followed instructions and had no issue . Rebooted via recovery and installed my stuffs.
-Wifi reception is the same as before and always weaker than my other phones. (minus 8 db)
-GPS IS NOT GETTING ANY FIX. 25 SAT in view and no one fixed.
-New Rom is a HUGE bit of improvement and feel more pleasant and very fast.
-DISPLAY is vibrant and very well set. Automatic mode is perfect also at night reading. good
- Battery leak in stand by is impressively low. less 1% full night. very good
THANKS TO THE TEAM BUILDING FOR THIS REALIZATION.
Can we suggest next challenge to make unlock the 3G 900Mhz Euro Band N°8 in a practical way?
I care less about the 4G...
---------- Post added at 03:52 AM ---------- Previous post was at 03:40 AM ----------
[email protected] said:
Hi Guys!
I would like to ask that ROM by titovich, which languages contains?
Thanks
Click to expand...
Click to collapse
Indonesian/Deutch/ENGLISH/Espanol/Filipino/FRENCH/Portugues/VIET/Russian/chinese/ and 2 symbolic i can't know ....sorry may be Hebreu,
lolo9393 said:
Can we suggest next challenge to make unlock the 3G 900Mhz Euro Band N°8 in a practical way?
I care less about the 4G...
---------- Post added at 03:52 AM ---------- Previous post was at 03:40 AM ----------
Click to expand...
Click to collapse
Yes Im trying that.
But for now, "adb reboot ftm" to reboot in ftm mode and enable qualcomm diag driver.
Then change nv's as written here and here. Uz mztool to calculate right entry's.
@heineken78
Thanks dude!
Its an official or unofficial translated ROM?
Im just ask the reason of hope, maybe put into some more languages too.
Im get this phone yesterday, it looks really great, but enter the recovery and fastboot mode its terrible.
Do you know TWRP or CWM recovery for this phone?
ilhi, i tried to disable backlight with .rar file you attached and it does work but i
heineken78 said:
TWEAKS:
1. Disable buttons backlight. (pale blue led shine instead). ROOT needed.
Replace system\lib\hw\lights.msm8974.so to get rid of buttons backlight. Instead, PALE blue led will be on.
Don't forget to backup the original file.
Advanced users can control that API /sys/devices/virtual/input/touch/light_led (with echo 0,1)
There is no any other control to disable or enable it.
XPOSED framework can't do anything too
Click to expand...
Click to collapse
ilhi, i tried to disable backlight with .rar file you attached and it does work but i can't adjust screen brightness in settings. Now its full bright and can't switch it low or automatic
a1dahiya said:
ilhi, i tried to disable backlight with .rar file you attached and it does work but i can't adjust screen brightness in settings. Now its full bright and can't switch it low or automatic
Click to expand...
Click to collapse
Dude, this is patched driver the from the build on first page. Drivers are different on stock502(titovich) so you may have an issue.
what should i do please help me
heineken78 said:
Dude, this is patched driver the from the build on first page. Drivers are different on stock502(titovich) so you may have an issue.
Click to expand...
Click to collapse
What should I do, please help me out
---------- Post added at 08:46 AM ---------- Previous post was at 08:38 AM ----------
a1dahiya said:
What should I do, please help me out
Click to expand...
Click to collapse
What drivers to change or any other change of value .....?
I'm on stock lollipop 5.0.2 rooted
I also tried to replace the patched file with original which I copied before replacing but nothing helped