Hey I had numasx running, I then tried installing MIUI, it did not work it booted up to the Samsung screen, I took out the battery manually booted into the cmw by pressing the volume keys and the power button, however the cmw changed colours from what was once red to now blue, i wiped and reflashed MIUI hoping it would work however it does not the samsung screen was on for 20 minutes, I tried bringing the phone back to At &T stock ( my phone is Rogers by the way) however this brick my phone where it constantly goes into a white screen and restarts when usb is connected.. any help, there is no way I can get into download mode.... When the phone is connected to the computer and Odin is on my screen it shows that my phone is constantly connecting and disconnecting ... What should I do? Should I send it into warrenty? and what is the difference between voodo lag fix and the regular blue cwm?... seriously htc phones do not seem to have this issue when flashing roms...
ramzilla136 said:
Hey I had numasx running, I then tried installing MIUI, it did not work it booted up to the Samsung screen, I took out the battery manually booted into the cmw by pressing the volume keys and the power button, however the cmw changed colours from what was once red to now blue, i wiped and reflashed MIUI hoping it would work however it does not the samsung screen was on for 20 minutes, I tried bringing the phone back to At &T stock ( my phone is Rogers by the way) however this brick my phone where it constantly goes into a white screen and restarts when usb is connected.. any help, there is no way I can get into download mode.... When the phone is connected to the computer and Odin is on my screen it shows that my phone is constantly connecting and disconnecting ... What should I do? Should I send it into warrenty? and what is the difference between voodo lag fix and the regular blue cwm?... seriously htc phones do not seem to have this issue when flashing roms...
Click to expand...
Click to collapse
hmm...someone else had this problem a few days ago.
http://forum.xda-developers.com/showthread.php?t=1437548&page=4
start at post #35
It's not a hardware issue though its a complete brick I just want to make sure other infuse owners don't get the same mistake and what steps can be taken to prevent it I am a noob when it comes to flashing especially this being my first samsung android but its the red cwm to the blue
it's not a brick.
brick is when you get nothing. absolutely nothing.
you've some sort of power looping...not brick.
I need help! I rooted yesterday with no problems. Tonight I was into Titanium searching for a way to remove bloat. I pushed a tab by mistake. It said it would remove 45mb and reboot. The phone now starts a reboot with sound, then goes into a cycle of the Samsung name screen (no sound) then to the Android launch screen (no sound). Then it just repeats over and over...I have removed the battery and replaced and tried to reboot, with no success. What did I do???
ehogan45 said:
I need help! I rooted yesterday with no problems. Tonight I was into Titanium searching for a way to remove bloat. I pushed a tab by mistake. It said it would remove 45mb and reboot. The phone now starts a reboot with sound, then goes into a cycle of the Samsung name screen (no sound) then to the Android launch screen (no sound). Then it just repeats over and over...I have removed the battery and replaced and tried to reboot, with no success. What did I do???
Click to expand...
Click to collapse
Have u installed clockworkmod recovery?! If yes then just keeps power + volume down + menu buttons pressed and boot ur phone. This should boot into recovery ( a screen with small text) then u gotta flash a new rom. Read about recovery and flashing.
If u haven't installed recovery ur in trouble. You'll have to push it to ur phone via adb. Ur phone is now "bricked" . Ask some senior member in the exhibit forum, as different phones have different unbricking methods
Hit THANKS if I helped you
But don't worry it's not that hard and we're here to help you.
Swyped From My Ice Cream Sensation
Virtuous 3.0
I have the Galaxy Fame DUOS GT-S6812B variant, I installed the Unofficial CM11 from this forum (http://forum.xda-developers.com/galaxy-fame/orig-development/rom-cyanogenmod11-t2897673), and suddenly touch screen and capacitive buttons weren't working. I tried to install back the official stock rom with Odin and I had the same problem (which I didn't have before installing the CM11) after this I tried to install the stock rom with Kies and same thing. Phone loads the OS and shows the "select language" menu but screen is unresponsive and "menu" and "back" buttons don't work at all, not even light up. Only power button, "volume buttons" and "home" work. I'm getting kind of desperate, a relative gave me the phone so I could make it faster and smoother and instead I've broken it. Please, some help would be highly appreciated. I think the problem might be that installing the CM11 messed up with the Drivers and flashing back the stock couldn't fix that. Is there any way to revert the process and get the drivers back?
Thank you all in advance.
I've got an answer in another forum saying it could be the kernel, but, wouldn't the stock ROM had solved that? in case it wouldn't how can I install the original kernel and thus fix this issue?.
ringox said:
I have the Galaxy Fame DUOS GT-S6812B variant, I installed the Unofficial CM11 from this forum (http://forum.xda-developers.com/galaxy-fame/orig-development/rom-cyanogenmod11-t2897673), and suddenly touch screen and capacitive buttons weren't working. I tried to install back the official stock rom with Odin and I had the same problem (which I didn't have before installing the CM11) after this I tried to install the stock rom with Kies and same thing. Phone loads the OS and shows the "select language" menu but screen is unresponsive and "menu" and "back" buttons don't work at all, not even light up. Only power button, "volume buttons" and "home" work. I'm getting kind of desperate, a relative gave me the phone so I could make it faster and smoother and instead I've broken it. Please, some help would be highly appreciated. I think the problem might be that installing the CM11 messed up with the Drivers and flashing back the stock couldn't fix that. Is there any way to revert the process and get the drivers back?
Thank you all in advance.
I've got an answer in another forum saying it could be the kernel, but, wouldn't the stock ROM had solved that? in case it wouldn't how can I install the original kernel and thus fix this issue?.
Click to expand...
Click to collapse
i m facing the same problem!!!!!
don't know how to solve this....
@ringox....Was your problem solved? please help me because i am having the same problem...my gt 6812 stucks on select language as touch is not working...
Nothings gonna work...trust me i have tried everything...your touchscreen got fried up. The only thing you can do is get it to a nearby samsung store or any nearby mobile repairing store to get a brand new touchscreen. I recommend you to not go to samsung store as it would cost you almost rs.2500 whereas if you go to any other repairing store you can get it fixed in less than rs.1000.
Hello,
It all happened like 2h ago when charging my phone (was at about 96%).
I just tried to open a Snap and my screen glitched, phone turned off itself after few seconds.
I could turn it on again only to see the same glitchy screen after one minute after turning on.
Now when I try to turn on my phone I can see the Poco logo and then a white screen with blue dots in a vertical
line going through the center of the screen.
I updated MIUI like a week ago, live in EU (MIUI was probably Global I'm not sure, I didn't change anything).
Bootloader is not unlocked, custom recovery is not installed.
USB Debugging is turned on.
Here is imgur with few photos of how it looks now:
https://imgur.com/a/lXsIm4t
Please help.. I've read that I need to give my phone to a service and they need to replace the motherboard.
I really don't want to lose my data.
I never read about that glitch in Poco phones before and I didn't back up my data.
I really need to get my photos of the phone (I really hope USB debugging helps here).
I also have Google Authenticator on this phone.. no idea if it's possible to get the keys back..
Maybe I could try tools from the index thread but I'm really scared I will make things worse, I need help with that.
That's not actually a brick ,it's jus a screen bug/error in MIUI , I had this white screen but only when I installed MIUI after a custom room ,but it solved very easy by turning phone off/on , but what you have is different ,I suggest you to enter recovery by pressing power button+volume up and factory reset the phone ,but first try entering safe mode by rebooting the phone and when the Poco logo appears, press volume down until safe logo appears, if your phone boots in safe mode you can recover your stuff , if not try factory resting to get the phone back.
try flashing the stock rom again using miflashtool.
2D1fferent said:
Hello,
It all happened like 2h ago when charging my phone (was at about 96%).
I just tried to open a Snap and my screen glitched, phone turned off itself after few seconds.
I could turn it on again only to see the same glitchy screen after one minute after turning on.
Now when I try to turn on my phone I can see the Poco logo and then a white screen with blue dots in a vertical
line going through the center of the screen.
I updated MIUI like a week ago, live in EU (MIUI was probably Global I'm not sure, I didn't change anything).
Bootloader is not unlocked, custom recovery is not installed.
USB Debugging is turned on.
Here is imgur with few photos of how it looks now:
https://imgur.com/a/lXsIm4t
Please help.. I've read that I need to give my phone to a service and they need to replace the motherboard.
I really don't want to lose my data.
I never read about that glitch in Poco phones before and I didn't back up my data.
I really need to get my photos of the phone (I really hope USB debugging helps here).
I also have Google Authenticator on this phone.. no idea if it's possible to get the keys back..
Maybe I could try tools from the index thread but I'm really scared I will make things worse, I need help with that.
Click to expand...
Click to collapse
I had this situation too 2 days ago after installing Magisk 24.3 , CusRom DF latest, Firmware 12.5.7. What i did was hit the power button for a sec immediately,and my device was back to normal untill now.
Antonio7489 said:
That's not actually a brick ,it's jus a screen bug/error in MIUI , I had this white screen but only when I installed MIUI after a custom room ,but it solved very easy by turning phone off/on , but what you have is different ,I suggest you to enter recovery by pressing power button+volume up and factory reset the phone ,but first try entering safe mode by rebooting the phone and when the Poco logo appears, press volume down until safe logo appears, if your phone boots in safe mode you can recover your stuff , if not try factory resting to get the phone back.
Click to expand...
Click to collapse
How is it now after awhile?
groovybanana21 said:
How is it now after awhile?
Click to expand...
Click to collapse
I dont use MIUI anymore but i user it for 3 month after that bug and nothing happened ,no ghost touch ,just normal MIUI(with the garbage optimization ) .I dont know how it is with MIUI 13. You should expect anything from MIUI in this phone ,for 200$ that is sold globaly.
Antonio7489 said:
I dont use MIUI anymore but i user it for 3 month after that bug and nothing happened ,no ghost touch ,just normal MIUI(with the garbage optimization ) .I dont know how it is with MIUI 13. You should expect anything from MIUI in this phone ,for 200$ that is sold globaly.
Click to expand...
Click to collapse
I see. I use this device since october last year, i never face any bug except that glitch screen even for a second,that gave me mini heart attack, lol..
So yes i flash stock MIUI13 again and stay on stock till now.
Just happend to my phone everything is stock ... Rebooting gives the same white screen with blue vertical dots / also wiped the data but it still gives the same result
Bumaye961 said:
Just happend to my phone everything is stock ... Rebooting gives the same white screen with blue vertical dots / also wiped the data but it still gives the same result
Click to expand...
Click to collapse
HELP
Bumaye961 said:
HELP
Click to expand...
Click to collapse
You should flash MIUI again with Mi Flash Tool , if it still happens you should flash a custom rom,if you get the same result go to a repair center.
just happend this today to me aswell, same problem with white screen and blue dots in the middle, i had it working for a bit like 3 times after restarting and restarting it for hours, it works for some time and randomly goes blank, safemode doesn't work the problem persists in recovery mode too but it works for the most time, i've never had a custom rom everything is stock and im on miui 13.0.1, the phone does not respond to charging it when off and you have to hold the power button for a long time to turn it on
I recommend to flash stock rom through fastboot mode.
Bambo. said:
just happend this today to me aswell, same problem with white screen and blue dots in the middle, i had it working for a bit like 3 times after restarting and restarting it for hours, it works for some time and randomly goes blank, fastboot doesn't work the problem persists in recovery mode too but it works for the most time, i've never had a custom rom everything is stock and im on miui 13.0.1, the phone does not respond to charging it when off and you have to hold the power button for a long time to turn it on
Click to expand...
Click to collapse
That's indicates your mainboard is broken. claim your warranty for mainboard replacement or new phone replacement(in some region)
i got it working again after messing with plugging the charger in and out while powering it on, it booted and i reinstalled the latest update again from the settings and its been working for 6 hours now, no problem so far.
its a softbrick, in the message above i said that fastboot did not work and i was wrong, but you need to have the bootloader unlocked if you want to try the stock rom flash method
Bambo. said:
i got it working again after messing with plugging the charger in and out while powering it on, it booted and i reinstalled the latest update again from the settings and its been working for 6 hours now, no problem so far.
its a softbrick, in the message above i said that fastboot did not work and i was wrong, but you need to have the bootloader unlocked if you want to try the stock rom flash method
Click to expand...
Click to collapse
I don't think its a softbrick you should get it inspected at any Xiaomi Repair Center.
Same has happened with my POCO X3 PRO. However, after few restarts the phone is now not re-starting after long press boot button. Help.
Atul10 said:
Same has happened with my POCO X3 PRO. However, after few restarts the phone is now not re-starting after long press boot button. Help.
Click to expand...
Click to collapse
try charging it overnight and retry even if it does not respond to charging, i did that too when mine stopped powering on although it only charged around 41%
Antonio7489 said:
I don't think its a softbrick you should get it inspected at any Xiaomi Repair Center.
Click to expand...
Click to collapse
i know it might not be a softbrick but the charger case worked for me it might be a coincidence too because it is random most of the time it boots up randomly after restarting several times, when it does it can work for as little as some minutes or a couple of hours, to me it seemed like the rom got corrupted or something, im not an expert.
my poco x3 pro wont turn on and after the poco logo it gives white screen with blue vertical dots and miflashtool wont work because i didnt download the file on my phone beforehand and my warranty is over what should i do
abdalla 22564 said:
my poco x3 pro wont turn on and after the poco logo it gives white screen with blue vertical dots and miflashtool wont work because i didnt download the file on my phone beforehand and my warranty is over what should i do
Click to expand...
Click to collapse
No real answer till now ðŸ«