[Q] Water Damage - General Questions and Answers

I dropped my Galaxy II S Skyrocket in the toilet. It wasn't in for more 2 seconds, literally. I took the battery out and used a hairdryer on cold setting (not hot at all, made sure not to melt anything). It works fine, with the exception of the mic. I can't be heard unless its right up to my mouth, and then its scratchy.
My question is, has anyone else had this issue? If so, do you think the mic is shot, or just still need to dry out. I really don't want to go back to my iPhone 4. I have become a huge android fan since switching back in February.

The hairdryer wasn't really the best option.
Submerge the phone in a bowl of silica gel (or rice) for a day or two.
If it doesn't improve your microphone is probably shot.

Exact same problem. I have the Epic Touch.. Does it work when you record video?
The notification light was stuck on as well for me. I took it apart and cleaned the circuit board and such (Don't recommend unless you feel safe in your abilities) and that fixed the light. My mic works when recording video but not for anything else (Skype, Search, Calls, Etc...)

Sorry, it's been a whole since I have been on the forum.
I am happy to say hat it dried put and worked fine. I guess there was just some water left. It was literally only on the water for a split second, and never totally submerged. I owe a lot of the protection to my otterbox. I know it's not water proof, but it did hold back some of the damage.
Sent from my SAMSUNG-SGH-I727 using xda app-developers app

Related

Case-mate tough case

Hi all i would just like to share my experience with this case..Last week i had the unfortunate accident of dropping my Samsung galaxy s phone in the toilet at home...
The phone fell out of my pocket and straight in too the pan and finally landed in the u-bend.
The phone was in total water submersion for not more that 3-5 seconds..my heart fell to the floor...
I quickly grabbed the phone from the toilet..turned phone off and removed the battery..water was all inside the phone.
I shook the phone and lots of water came out..my thoughts at this time was phone was well and truly buggered.
I proceeded to dry the phone on my radiator at home..sim-card,sd-card,battery and back plate all removed to aide drying.
Left the phone to dry for a full 24 hrs...before attempting to turn phone back on.
There was condensation inside the phone which all dispersed after 24 hrs. of drying out the phone.
And the big moment arrived of putting the phone back together to see if it would ever work again....
My heart was pounding at this time hoping and willing the phone back to life..pressed the power on button and the phone came to life.
Apart from having to do a reset on the phone and re-installing all my apps there has been no problem with the phone working 100%.
Phone has been working for well over a week now with no problems.
How lucky was I??...Im not saying that the Casemate Toughcase is the be all and end all in cases but im sure it went some way in helping reduce the damage that would have been caused by water ingress in to the phone.
happy case hunting...
Ewwww That Dirty Samsung Galaxy S
Lol..must add the water in toilet was clean...
The tough case was not the parameter influencing the luck in this case. As long as the rear speaker hole is not sealed, the water will always have a way inside the phone, no matter how many shock protection layers you have o the phone.
And generally speaking, tap water is not dangerous for the electrical parts of low voltage powered devices (like watches, phones and so on). The main issue with phones dropped in water is that the water will infiltrate in the optical dispersers of the LCD screen and on the screen connectors, generating blurry pictures or no picture at all.
I've learned something from your experience ... the water will not go in between the OLED screen and the digitizer .. which is a GOOD thing.
Great! I'm glad your SGS survived!
just take more care of it, ok? and don't drop it on Sea Water!
any waterproof supplies for galaxy s?
alex.bacer said:
any waterproof supplies for galaxy s?
Click to expand...
Click to collapse
Zip-lock bag?
I've almost fell from my seat reading the end of your story. I am glad to read that everything went Ok. But does the phone smell .... hmmm different?
Truly lucky.
Sent from my GT-I9000 using XDA App
There are better ways to change the colour of the phone
Update phone still working a OK two and a bit weeks on...
I have toughcase as well. Not the prettiest case, the phone loses it's "luxury" feeling, but you can certainly throw around the phone no problem.
I dropped my Galaxy S (with Tough Case) today, it fell directly on my hard tiles floor at a height around 70cm. I was really freaked out! I picked it up and it was still there like nothing happened (no crash, no slow, no reboot, no nothing) really happy that I chose this case!
thanksss a lot for content

skyrocket water damage fix

my skyrocket got dropped in water i pulled it out put it under a hair dryer and it works, kind of. i use it as my primary phone right now but sometimes it freezes and the touch sensitive keys dont work the it either a) shuts off or b) i have to take the battery out.
any idea what replacement part or parts i could possibly change to fix this?
A new phone you prolly toasted the pcb
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
http://forum.xda-developers.com/showthread.php?t=1582881
Link to thread with link to AdamOutler video recovering from water. Take apart if you can. If left as is, you may expect further deterioration of the internal components and connections.
dac1227 said:
http://forum.xda-developers.com/showthread.php?t=1582881
Link to thread with link to AdamOutler video recovering from water. Take apart if you can. If left as is, you may expect further deterioration of the internal components and connections.
Click to expand...
Click to collapse
Issue is he has been running it already
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
nrm5110 said:
Issue is he has been running it already
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
Click to expand...
Click to collapse
Right. All the damage is already done. He didn't care for it properly immediately after it got wet.
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
It ain't over till it's over.
I had the proverbial "Bad Day" yesterday, or rather, my poor Skyrocket did. It went from being perfect, not so much as a scuff on it to: a) Dropped onto my CEMENT driveway from a height of almost 6 feet. How is this possible, you may ask? I was leaning over the porch rail to open the recycling bin, instead of going around and down the stairs... PURE LAZINESS is what it was! Anyway, it slipped out of my top pocket, in spite of the fact that I was trying to hold it with my fore arm. Why of WHY did the Skyrocket have to be so slim and sleek! The phone hit the cement, bounced once or twice, and then slid, ON IT'S FACE about 3-4 feet, with me making that scream you do while breathing in; kind of a "Uuuoooaaarrrrggghhhh" is the best I can describe it. I followed this by grabbing the phone, taking it inside and throwing an ever loving **** fit. I proceeded to throw the phone on the couch (Even during a full blown hissy, I try to protect the damn thing!) and as I examined it, it was one of those "It could have been much worse" things, that we try to comfort ourselves with, and amazingly they do help, even if it's BS. The damage was 100% to the front black chrome bezel (around the front edge of screen) - A part that in fact CAN be replaced, but requires COMPLETE disassembly, including separating the Screen from the digitizer, which I have no clue how to do. It may NOT be possible, in fact without breaking a layer of adhesive. EVERY other part of the phone is replaceable, in modular sections, I know, and will explain in a moment.
So... bad day right... well that would had been enough since I love my phone as many folks on XDA understand, but nooooooo. I had to then drop it in 8 inches of standing water. Yep.
Was in the bottom of my above ground pool trying to restart a siphon for draining it, when, "SLIP" I %&*&#@ DID IT *@#&$% AGAIN!! *#$%&!!
Phone drops STRAIGHT TO THE BOTTOM OF THE HALF FOOT OR SO WATER IN THE POOL!!!!!!!!
Ok, so I almost NEVER keep my phone on me when doing physical work of any type. When I work on my cars engine compartment, or crawling around under it, I put my phone in the car. Even when I dry my car after pulling out of the car was the phone gets taken OUT of my top pocket and put somewhere safe. I guess I got complacent, since I hadn't had "an incident" in several years. Even with my 5" Dell Streak, beast that it was, I never let it slip from my standard place of Top shirt pocket. Every time I lean forward, my hand or forearm holds the phone from slipping. It is a motion as natural to me as shifting while driving, without even thinking about it. But even I know that "**** happens" so, lesson learned: I am going to bite the bullet and get a nice slim cover for the Skyrocket. NOW THAT IT WORKS AGAIN....
So after I pulled it out of the water I was in full panic mode: I quickly patted it in my shirt, but even while it was still wet and dripping, I RIPPED the back cover and battery out. In hindsight, I wish I had worked to dry the exterior quickly, and THEN opened it. The battery liquid detector wen bright read... CRAP! The PHONE liquid detector stayed WHITE… Ahh, finally caught a break. So after a basic dry everything I can reach (and the Sim came out wet, and the microSD came out wet, not good signs) I tried a quick power up.... The SkyICE animation began, then suddenly changed colors and turned pink/red.. WHOA.. STOP THE BOOT! So I yanked the battery.
After quite a bit of further drying, warm gentle air across the back for a venturi effect (sure!) another try and the screen behind the Samsung logo was bright, blood red, instead of black...
THIS convinced me to take the sucker apart, and for the most part I did really well. I did break ONE tab on the "body" of the phone - that holds the back section over the PCB on, but fortunately there are 7 screws, and it fit tightly when reassembling. I DID frin s coupe drops of water, though they did not seem to be in spots that would short anything, like on the stainless cover over the Qualcomm Processor, but those were just what I could see, without magnification. I dried those, blew warm gentle air over the PCB, and then gently warmed the parts over a low wattage bulb in a lamp.
I am SO impressed with the construction of this baby! I WOULD prefer more alloy, and less plastic for frame, shell & body parts, but what AMAZED me were the connections for all the ribbon cables, between modular PCB's (Like the one on the bottom with a antenna, USB port, Speaker, Mic and capacitive touch buttons, and others... The ribbon just comes around from behind, and attaches via a snap in connection to a receptacle soldered onto the corresponding PCB. In the video of the guy taking it apart, he just goes around and pops up 5 or 6 of these in about 10 seconds total time elapsing. Anyway, check out the middle section of the video I post here, right after he pulls the rear frame off... you'll see...
Bottom line? It's maybe NOT too late for the OP... Granted the more he runs it with a short or worse, the more potential damage. But in my experience it is REALLY difficult to get ALL the water out of a current design phone. It just travels from section to section, His best option (besides either trashing it or paying for repairs is doing what I did. Parts are readily available from Hong Kong, and short of the Screen/Digitizer, most are reasonably priced. Good luck with it. Get a jewelers screwdriver, and a plastic "separator" before starting. My only warning: When separating the main frames, after removing the 7 screws holding the two main frames together, use a CURVED separator, and try to bend the frame that’s the back of the phone OUTWARD a little bit. In other words, pull it OUT as well as spreading the two halves. I did not have a curved plastic tool, just a straight one, and as I pulled the two halves apart, I did not bend it out (away from an inner opening, that tabs go into from the back frame, and I snapped one of the inner openings edges. Think of it as tiny tabs that you want to pull up out of a depression before pulling the parts directly away from each other.
Aww, hell, just watch the video closely, I repeated some sections a few times before trying the procedures.
http://www.youtube.com/watch?v=vf6jqYejWNU
Sorry for the lengthy post, but if I can save ONE person the pain of losing a good friend, then I think my life van finally have true meaning. Or something like that.
Why would you power it on so soon without even taking it apart to dry out?
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
You see this guys pinky nail?!? Whou. I couldn't stop looking at it. I bet i can guess what its for
Sent from my SAMSUNG-SGH-I727 using Tapatalk
should've left it off and left it in sack of rice for a day or so. RIP your phone...
Bricks don't fly or float.
Sent from, The Eclectic Chair.
At least he didn't drop it in the water during a mini bath
Sent from my SGH-I727 using xda premium
jnicks510 said:
should've left it off and left it in sack of rice for a day or so. RIP your phone...
Click to expand...
Click to collapse
Yeah I was about to mention rice
Sent from my SAMSUNG-SGH-I727 using xda premium
Well, I dropped my skyrocket in water a couple days ago but fished it out instantly.
Learning from past mistakes, I immediately turned it off and took the battery, sim and memory card out. After I took a paper towel and tried to dry as many cracks and openings as possible until I saw I could not get any paper towel wet. I put the phone and battery in a sealed bag filled with rice and left it for 3 days. When I took it out, the phone was covered in rice dust so I took compressed air and tried to blow it clean. Praying it worked, I put the battery in and turned it on. Miraculously it booted like nothing ever happened.
I heard online to not use a hair drier as you will blow the water into components which were initially not wet.
"I heard online to not use a hair drier as you will blow the water into components which were initially not wet."
This. Definitely avoid hairdryers. Rice is like magic. I have only dumped one phone in water (it was an iPhone 3GS on and playing a video at the time! Then I had a hellish time getting it to turn off... kept turning back on.) I popped the screen and gave it a rice bath for a couple days. It was as good as new after that. (Well, as good as any iPhone can be, anyway. )

[Q] How water permeable is the Nexus 5 speaker?

Question for all of you; I just got a case (Diztronic) and a couple of screen protectors for my new Nexus 5
One of the screen protectors I got was the Xtreme Guard type (very wet application type). I have used this type before, though I always worried that using a lot of water to apply it could possibly get into the phone and damage it.
After I applied it (while turned off, of course), I didn't quite like it (I know you're supposed to wait a few days, but I was impatient, and another brand is coming in the mail, the overly-priced Zagg model), so I removed it, cleaned the screen, shook the phone a bit to try to get any water out that might have gotten into the speaker hole, blew air from some canned air into the speaker hole (not right up next to it, but reasonably close) and left it overnight under a warm lamp.
Yes, paranoid about my new phone. *sheepish look*
In any case, I was reading various things, with people saying "I damaged my speaker by the water getting in there" and "Blowing air into the speaker hole will damage the speaker" and "Putting it under a hot lamp will damage the speaker" etc.
Have you ever heard of ANY of those things damaging the speaker or the phone? I'm all paranoid now. I'm using it today and it seems no worse for wear, and the speaker (ear speaker) seems to be working fine, but I'm all like "Huh, did it sound JUST like that before I did all of the above?" etc.
Any past experiences or advice you'd like to chime in on? Anyone got a close-up look at the faceplate of the Nexus 5 and know if the speaker whole actually is reasonably waterproof, etc?
I looked at this disassembly video: http://www.youtube.com/watch?v=YzUj3fpI994 - and I still couldn't quite tell.
- Tim
tbessie said:
Question for all of you; I just got a case (Diztronic) and a couple of screen protectors for my new Nexus 5
One of the screen protectors I got was the Xtreme Guard type (very wet application type). I have used this type before, though I always worried that using a lot of water to apply it could possibly get into the phone and damage it.
After I applied it (while turned off, of course), I didn't quite like it (I know you're supposed to wait a few days, but I was impatient, and another brand is coming in the mail, the overly-priced Zagg model), so I removed it, cleaned the screen, shook the phone a bit to try to get any water out that might have gotten into the speaker hole, blew air from some canned air into the speaker hole (not right up next to it, but reasonably close) and left it overnight under a warm lamp.
Yes, paranoid about my new phone. *sheepish look*
In any case, I was reading various things, with people saying "I damaged my speaker by the water getting in there" and "Blowing air into the speaker hole will damage the speaker" and "Putting it under a hot lamp will damage the speaker" etc.
Have you ever heard of ANY of those things damaging the speaker or the phone? I'm all paranoid now. I'm using it today and it seems no worse for wear, and the speaker (ear speaker) seems to be working fine, but I'm all like "Huh, did it sound JUST like that before I did all of the above?" etc.
Any past experiences or advice you'd like to chime in on? Anyone got a close-up look at the faceplate of the Nexus 5 and know if the speaker whole actually is reasonably waterproof, etc?
I looked at this disassembly video: http://www.youtube.com/watch?v=YzUj3fpI994 - and I still couldn't quite tell.
- Tim
Click to expand...
Click to collapse
i dont know if this applies to the nexus 5 speaker but
i have gotten water on my galaxy s4s speaker 3 times.
once when i just got out of the shower, a single drop of water rolled down my arm and landed on my speaker.
the second time while i was in the shower. it started raining and water blew in through the window.
the third time i was doing dishes and water splashed.
and after all this, each and every time all i did was take out the battery, let it sit for a few hours. and after that the phone worked perfectly.dont blow air, dont throw it in the oven (ive seen people do this) just let it sit and dont play any sounds.

Earpiece Volume Went Abysmal

Hi guys,
My screen got a bit dirty today so I decided to get wet a piece of cloth and wipe down my screen. However it seems that now my call quality is god awful and I can barely hear out of the earpiece. Has this happened to anyone else? I've wiped down my iPhone 4 multitudes of times in the same manner and have never encountered anything like this.
I actually thought the sound quality was excellent before and to have to fall like this is horrifying.
Can anyone suggest a solution? I have a big phone interview this week and I need to be able to hear clearly
Did water get into the internals? Turn off your phone and place in into rice.
Unless it entered through the earpiece, I don't think it did. I really have no idea about how the earpiece is built or if the water would be able to reach the internals via the headphones. Definitely nothing went inside any other opening though....
Wait for the earpiece to dry, its quite exposed up there. Personally I use dry cloth only but if its really bad a touch of water on the cloth can help but not so much as to create any puddles.
Sent from my Nexus 5 using Tapatalk

My water damaged Gear S2 update

I posted a little bit ago about my Gear S2 getting splashed at a pool party and it turning off and wouldn't turn on. I waited a day having it in a bag of rice before turning it on even though it was supposed to be water resistant. Turned it on and the screen flicked non stop. I periodically turned it on seeing if anything changed and it didn't.
Finally I contacted Samsung and they told me in a professional way to "go screw yourself". That just because they say it can withstand getting wet, doesn't mean they stand by it.
So I decided to take it apart. I didn't want to before because I've never taken apart a water proof smart watch before and didn't know if it would void the warranty (lol) or if it was glued shut to be water tight. Well honestly I don't see how it's supposed to keep water out with the way it is put together. But I quickly found the damage was on the LCD connector. It had a white crust like substance. So I cleaned it off with 99% isopropyl alcohol and a soft toothbrush and it works perfectly.
Needless to say my watch is avoiding water all together.
Wash dishes with mine, seems to work
Yeah I figured I would be able to do the same. I mean I take my S7 Edge into the pool and record video underwater all the time.
Back off my hols was tempted to try the s2 gear and S7 edge on the beach and pool - but didn't feel confident that it would work
Sent from my SM-G935F using XDA-Developers mobile app
I swam with mine for prolonged time in an Olympic sized pool... Worked like a charm... Guess that the quality of the watch differs from one person to another... Good job on fixing yours!
Sent from my iPhone using Tapatalk
Though everyone can do what they want, I've made quite the effort keeping mine away from water, as I learned with my Neo it didn't like water too well.
I've used my Gear S2 inside the water for prolonged times with no problem. At the beach and at the pool. The first time I did it by mistake but it survived.
Sent from my SAMSUNG-SM-N920A using Tapatalk
It can survive beer too, I tried it today [emoji3] It was an accident of course and got literally soaked, but it's perfectly fine.
Sent using Tapatalk
Got mine wet, now a day later the speaker sounds tiny and crackles almost has no volume to it.. Its getting better though the more I play music through it
As with others, I've had expected water-resistant results with mine as well (Verizon 3G classic). Shower with it, clean it under running water, gets wet in all sorts of other activities (washing the car, dishes, etc.). No issues.
Sounds like you simply got a bad one -- something that is inevitable, as there simply is no manufacturing process that yields zero defects, ever.
What is really, really disturbing is the response from Samsung.

Categories

Resources