I'm planning on putting my phone fully back to stock. I just have a few questions that I can't find answers to, if anyone could help it would be greatly appreciated.
Background
S4 Version
HBoot: 1.06*
Bought the phone second hand, it was carrier unlocked and already rooted etc.*
The phone CID says orangeuk, but*I use 3UK Network.*I'm going to have to use SuperCID before I flash the ruu, because there is no orangeUK ruu available.
1.**Is the HTC_001 the best CID to use for ota's and ruu files?
2. When I re-lock bootloader and flash ruu, will I lose the carrier unlock?
Sent from my HTC One S using xda app-developers app
I dont have an answer for 1 but im pretty sure about 2 that carrier unlock wont go. Once you unlock it it stays unlocked
Right, this is my plan to get back to stock. If anyone has any better ideas please let me know!
1. Change radio 1.06es version to match ruu radio (read somewhere the ruu might not run if my radio is newer, currently 1.11)
2. Change CID to HTC__001 to run 2.31 WWE ruu.
3. Re-lock Bootloader
4. Run 2.31 WWE ruu
5. Update software via OTA to JB.
6. Carrier unlock phone if necessary using code created while rooted.
Questions
Do I have to flash stock recovery or will the ruu do that?
Can I run the 2.31 WWE ruu from hboot 1.06, or do I need to use 1.53 ruu as that has the same hboot?
I assume the OTA will also update my radio to 1.11?
Thanks
rosswhite said:
Right, this is my plan to get back to stock. If anyone has any better ideas please let me know!
1. Change radio 1.06es version to match ruu radio (read somewhere the ruu might not run if my radio is newer, currently 1.11)
2. Change CID to HTC__001 to run 2.31 WWE ruu.
3. Re-lock Bootloader
4. Run 2.31 WWE ruu
5. Update software via OTA to JB.
6. Carrier unlock phone if necessary using code created while rooted.
Questions
Do I have to flash stock recovery or will the ruu do that?
Can I run the 2.31 WWE ruu from hboot 1.06, or do I need to use 1.53 ruu as that has the same hboot?
I assume the OTA will also update my radio to 1.11?
Thanks
Click to expand...
Click to collapse
The RUU should update everything. Including the stock recovery, Hboot, and radio. I already Rooted the One S. Then unrooted. Then rooted again. The only thing i will mention....
Make sure you have the stock Boot.img first. Then use Fastboot to load the boot.img. then you can flash the RUU. Good luck
Hello, I have my HTC One X of AT&T unlocked by code through AT&T. It´s Rooted and it´s Bootloader is unlocked and also has the CWM Recovery installed. Never flashed any ROM, it still have the Original ICS ROM, it´s S-ON. Can I update it manually or would I be bricking it?
I was going to follow this tuto http://www.titularesandroid.com/2013/03/actualiza-tu-htc-one-x-at-jelly-bean.html?showComment=1364530268627#c3645276792953205699 but it says that it shouldn´t have "SuperCID and S-on" I don´t have SuperCID because I legally unlocked it, my doubt is about S-on, should I be S-off? If I have to, how do you do it? Thank you.
philohtc said:
Hello, I have my HTC One X of AT&T unlocked by code through AT&T. It´s Rooted and it´s Bootloader is unlocked and also has the CWM Recovery installed. Never flashed any ROM, it still have the Original ICS ROM, it´s S-ON. Can I update it manually or would I be bricking it?
I was going to follow this tuto http://www.titularesandroid.com/2013/03/actualiza-tu-htc-one-x-at-jelly-bean.html?showComment=1364530268627#c3645276792953205699 but it says that it shouldn´t have "SuperCID and S-on" I don´t have SuperCID because I legally unlocked it, my doubt is about S-on, should I be S-off? If I have to, how do you do it? Thank you.
Click to expand...
Click to collapse
I would S-OFF. I can explain the steps I took but it may have been a bit overkill. I had a 1.09 hboot so I didn't want to take any risks. I'm on Telus which is only up to 3.17. I'm not sure how 3.18 would go as I understand AT&T has put a mechanism for checking with AT&T over the network. Nevertheless.
- I downloaded the RUU for my phone which was in my case a TELUS RUU 1.91.661.4 and then I extracted the rom from the RUU and the Hboot from the ROM and I flashed the stock Hboot.
- I Booted into the bootloader/fastboot and then I changed my CID back to default, in my case TELUS001. (I don't think you need to do this with S-OFF but it takes less than a minute to do)
- Rebooted back to bootloader/fastboot and ran the RUU
- When the RUU was done I was on ICS.
- Re-Unlocked my bootloader (I'm not on AT&T so no need for Super CID for me, was just to get S-OFF)
- Flashed TWRP
- Boot back to rom to get OTA
- After OTA was done, Booted to TWRP to root stock then nandroid backup for good measure, then flash whatever
philohtc said:
I don´t have SuperCID because I legally unlocked it,
Click to expand...
Click to collapse
SuperCID has nothing to do with SIM unlock. SIM unlock of course allows you to use the phone with another carrier's SIM. CID and SuperCID relate to the HTC firmware such as RUUs and OTAs (typically only allows you to install software intended for your carrier version).
If your phone is the AT&T version, and its bootloader unlocked it must be SuperCID. Period.
SuperCID + OTA = brick
SuperCID + RUU = brick
That is, unless you have S-off. So do the facepalm s-off if you want to RUU or OTA.
Another approach is just flash a stock rooted Jellybean ROM, or a custom ROM based on the AT&T update, such as CleanROM 6. These can be found in the Development forum section.
Get SuperCid,S-off, you are already unlocked but when you get those just ruu to the current OTA and wallah.
so philohtc are you now s-off with jb update?
Not yet, but I'm not 100% sure yet, still having doubts. Because I remember when unlocking the bootloader the CID was all in 1. So how do I put the original CID ? My steps would be the following (Please correct me if I am wrong): 1st- Facepalm S-off 2nd- SuperCID? 3rd- Update through HTC Software Device?. Please give me all the warnings so I don´t brick my phone, thank you!
Boot to bootloader/fastboot.
Do fastboot oem readcid
This will tell you your Cid
If it's 11111111 or 22222222 then proceed to S-OFF.
If not, proceed to SuperCID then S-OFF
Once your S-OFF, Run the RUU
If you want to be anal like I was, after s-off, before running the ruu, you can change your Cid back to an at&t Cid using fastboot oem writecid xxxxxxxx where the X's are the default Cid. I don't know it for at&t by heart.
Sent from my One X using xda app-developers app
exad said:
If you want to be anal like I was, after s-off, before running the ruu, you can change your Cid back to an at&t Cid using fastboot oem writecid xxxxxxxx where the X's are the default Cid. I don't know it for at&t by heart.
Click to expand...
Click to collapse
CWS__001
Appreciate that, thanks bud
Sent from my One X using xda app-developers app
Running an RUU is only simple for those who haven't been messing with their devices, and that usually isn't us. Since I just did this, I want to write down the steps because I was not able to find easy answers.
This assumes your device is rooted with a different ROM installed. If that is not the case, then you can just download and run the RUU for your device, end of instructions.
Downloading the correct RUU
The most complete list of RUUs for Ville is found on androidruu.com
T-Mobile: http://www.androidruu.com/getdownlo..._10.30.50.08L_release_309489_signed_ICS_2.exe
HTC Europe: http://www.androidruu.com/getdownlo...28_10.27.50.08L_release_301814_signed_2_4.exe
There are RUU updates listed for other service providers, but I can't tell if they are JellyBean hboot 2.15 or not. If someone knows, I'll update this post.
Preparing your device
Make your device s-off if it isn't already. Why?
You will not have to relock the bootloader to perform the RUU update.
You will not have to flash the boot image separately.
If for some reason you can't or won't go s-off, you can still do this, but will have many more steps to follow.
Instructions to make your device s-off are here for firmwares below 3.14: Facepalm S-Off for HTC Devices One S, One XL, Droid DNA
Or you can use the HTC All-In-One Toolkit which helps you through the process.
Use the HTC All-In-One Toolkit (link above) to change the CID to match the RUU.
You needed Super CID to gain s-off, but it won't help you install RUUs. Even if you are Super CID (11111111), you must change your CID to match the RUU you are installing (mine is TMobile: T-MOB010). I know, kinda defeats the purpose of being Super CID, but the RUU won't succeed otherwise. If you are s-off, it is a one click operation using the All-In-One Toolkit.
Backup your device
Use Titanium backup to backup all your user apps so you can restore them afterwards. (No, don't restore system apps please!)
Also back up your ROM by booting into recovery mode and selecting Backup.
If you are only updating the hboot but keeping the same ROM, you can just restore the backup afterwards. Not sure why anyone would need to update the hboot without installing a new ROM, but then you also have a backup in case things go wrong.
Run the RUU
If you are s-on you will have to relock the bootloader by rebooting into the fastboot mode, connecting your device to the computer and running the command "fastboot oem lock". You will also have to follow the process again to unlock your bootloader after doing the update. Tutorials for that are found elsewhere.
1. Leave bootloader unlocked, and leave s-off as is. No need to go back to s-on or relock bootloader.
2. Run the RUU and wait while it updates the phone (Incidentally, it didn't even wipe my sd partition data!)
3. While you are still in bootloader mode (before booting up), use the All-In-One tool to install the TWRP S4 recovery. Or, if you don't want to use the tool, you'll have to download a recovery and use "fastboot flash recovery" followed by the name of the recovery img file.
4. Reboot bootloader and enter recovery mode
5. Restore from backup or Mount USB from TWRP and copy over the ROM and gapps package, flash, wipe cache, and you are up and running.
If you are s-on you will need to extract the boot.img from the zip you are flashing and flash that image separately with "fastboot flash boot boot.img"
Note that device still has the unlocked bootloader and is still s-off! :victory:
My device before: hboot 1.09, unlocked bootloader, Super CID, s-off (In layman's terms, this is a device with an unlocked bootloader so it can accept other ROMs, set to accept any service provider's RUU update via SuperCID, and has had write permission to the boot sector removed via s-off).
My device after: hboot 2.15, unlocked bootloader, T-MOB010 CID, s-off
If possible, I will answer your comments or questions by updating this post and I'll refer you back to here.
Have you changed your CID?
mag13 said:
Have you changed your CID?
Click to expand...
Click to collapse
Please read again.
I was Super CID (11111111) but easily changed it to match TMobile (T-MOB010) with this tool for the update.
Click to expand...
Click to collapse
yooouuri said:
Please read again.
Click to expand...
Click to collapse
I am on Super CID and it does not work
mag13 said:
I am on Super CID and it does not work
Click to expand...
Click to collapse
You have to change your CID back to the one for your RUU.
Can I use this tutorial to rollback to 2.15 or whatever works for ViperS rom with sense 4 after I flashed MaximusHD and firmware?
Now my phone is like this:
Hboot 2.16
Radio 1.20.50 (worst radio ever)
S-OFF
CID 11111111
The rom's with sense 5 (I tried just maximus because the others are not compatible with the new firmware, the sdcard mount point for multi user) are killing my battery more than twice faster compared with ViperS. 2h Display vs 5h on Viper.
Thank you!
Can we use this as rollback from h-boot 2.16 ?
mag13 said:
I am on Super CID and it does not work
Click to expand...
Click to collapse
I didn't think it would. Glad you didn't brick your phone and I'll update the OP based on your experiment.
flow27 said:
Can we use this as rollback from h-boot 2.16 ?
Click to expand...
Click to collapse
arazvan2002 said:
Can I use this tutorial to rollback to 2.15 or whatever works for ViperS rom with sense 4
Click to expand...
Click to collapse
Upgrading your hboot is a one way street, as far as I know. Can't you change the radio to something else?
I flashed Viper ROM. All the things are ok, gsm, wifi, etc just I can't see the internal memory like I should. I can browse to it file es file explorer but I need a method to default mount the new (4.2.2) location of it. Where is mounted by the internal memory in 4.1 JB? I discovered a file vold.fstab. Maybe I can change something like that somewhere to be able to use 4.1 ROM's again.
Sorry for OFF topic.
Somebody asked it but i want a clear awnser.
Can i use it to roll back to 2.15 from 2.16?
yooouuri said:
Somebody asked it but i want a clear awnser.
Can i use it to roll back to 2.15 from 2.16?
Click to expand...
Click to collapse
Yes you can if youre s-off.
Sent from HTC One S using android 4.2.2 sense 5
Im s-off and changen my RUU back to the origonal.
Using RUU_Ville_U_JB_45_S_HTC_Europe_3.16.401.8_Radio_1.11.50.05.28_10.27.50.08L_release_301814_signed_2_4
But i get the same error. Cant update because wrong "Update tool".
-------------------------------
Flashed orig_hboot_2.15.0000.zip
But im stuck on 1.20 Radio?
yooouuri said:
Im s-off and changen my RUU back to the origonal.
Using RUU_Ville_U_JB_45_S_HTC_Europe_3.16.401.8_Radio_1.11.50.05.28_10.27.50.08L_release_301814_signed_2_4
But i get the same error. Cant update because wrong "Update tool".
-------------------------------
Flashed orig_hboot_2.15.0000.zip
But im stuck on 1.20 Radio?
Click to expand...
Click to collapse
Did you run the RUU.exe when your phone was in bootloader (fastboot USB mode)?
tivofool said:
Did you run the RUU.exe when your phone was in bootloader (fastboot USB mode)?
Click to expand...
Click to collapse
That's the right thing to do, yes?
kilo94 said:
That's the right thing to do, yes?
Click to expand...
Click to collapse
Yes
I have the same problem. I can't go back to stock. I haven't changed my CID yet but I see that has not worked for you.
Did you try with HTC__001 ?
dhigby said:
Running an RUU is only simple for those who haven't been messing with their devices, and that usually isn't us. Since I just did this, I want to write down the steps because I was not able to find easy answers.
This assumes your device is rooted with a different ROM installed. If that is not the case, then you can just download and run the RUU for your device, end of instructions.
Downloading the correct RUU
The most complete list of RUUs for Ville is found on androidruu.com
T-Mobile: http://www.androidruu.com/getdownlo..._10.30.50.08L_release_309489_signed_ICS_2.exe
HTC Europe: http://www.androidruu.com/getdownlo...28_10.27.50.08L_release_301814_signed_2_4.exe
There are RUU updates listed for other service providers, but I can't tell if they are JellyBean hboot 2.15 or not. If someone knows, I'll update this post.
Preparing your device
Make your device s-off if it isn't already. Why?
You will not have to relock the bootloader to perform the RUU update.
You will not have to flash the boot image separately.
If for some reason you can't or won't go s-off, you can still do this, but will have many more steps to follow.
Instructions to make your device s-off are here for firmwares below 3.14: Facepalm S-Off for HTC Devices One S, One XL, Droid DNA
Or you can use the HTC All-In-One Toolkit which helps you through the process.
Use the HTC All-In-One Toolkit (link above) to change the CID to match the RUU.
You needed Super CID to gain s-off, but it won't help you install RUUs. Even if you are Super CID (11111111), you must change your CID to match the RUU you are installing (mine is TMobile: T-MOB010). I know, kinda defeats the purpose of being Super CID, but the RUU won't succeed otherwise. If you are s-off, it is a one click operation using the All-In-One Toolkit.
Backup your device
Use Titanium backup to backup all your user apps so you can restore them afterwards. (No, don't restore system apps please!)
Also back up your ROM by booting into recovery mode and selecting Backup.
If you are only updating the hboot but keeping the same ROM, you can just restore the backup afterwards. Not sure why anyone would need to update the hboot without installing a new ROM, but then you also have a backup in case things go wrong.
Run the RUU
If you are s-on you will have to relock the bootloader by rebooting into the fastboot mode, connecting your device to the computer and running the command "fastboot oem lock". You will also have to follow the process again to unlock your bootloader after doing the update. Tutorials for that are found elsewhere.
1. Leave bootloader unlocked, and leave s-off as is. No need to go back to s-on or relock bootloader.
2. Run the RUU and wait while it updates the phone (Incidentally, it didn't even wipe my sd partition data!)
3. While you are still in bootloader mode (before booting up), use the All-In-One tool to install the TWRP S4 recovery. Or, if you don't want to use the tool, you'll have to download a recovery and use "fastboot flash recovery" followed by the name of the recovery img file.
4. Reboot bootloader and enter recovery mode
5. Restore from backup or Mount USB from TWRP and copy over the ROM and gapps package, flash, wipe cache, and you are up and running.
If you are s-on you will need to extract the boot.img from the zip you are flashing and flash that image separately with "fastboot flash boot boot.img"
Note that device still has the unlocked bootloader and is still s-off! :victory:
My device before: hboot 1.09, unlocked bootloader, Super CID, s-off (In layman's terms, this is a device with an unlocked bootloader so it can accept other ROMs, set to accept any service provider's RUU update via SuperCID, and has had write permission to the boot sector removed via s-off).
My device after: hboot 2.15, unlocked bootloader, T-MOB010 CID, s-off
If possible, I will answer your comments or questions by updating this post and I'll refer you back to here.
Click to expand...
Click to collapse
Hey I used your instructions and everything was perfect thank you. I used to upgarde and downgrade hboot even to restore the HTC one S
I got the RUU "Error: 159" again with both RUU from first post and testet with each common cid, but at the end I only got success with super cid and the TMO_US Ruu.
Now I am back on Hboot 2.15 and can flash again the newest custom-recovery, thank you very much.
I've heard about a flashabe standalone zip for the hboot 2.15 and found this:
Only for S4!
Boot into bootloader and enable fastboot.
Code:
fastboot oem rebootRUU
Wait for the black screen with white HTC symbol. (Like when you flash a RUU)
then enter:
Code:
fastboot flash zip modded_hboot_YOUR_NEEDED_HBOOT.zip
then if you want
Code:
fastboot oem boot
(Boot into your current ROM)
modded_ = The red text is removed and "tampered" is gone in bootloader.
Download:
modded_hboot_1.06.0000.zip - (397.1 KB)
modded_hboot_1.09.0000.zip - (400.6 KB)
modded_hboot_1.13.0000.zip - (399.0 KB)
modded_hboot_1.14.0002.zip - (405.3 KB)
modded_hboot_1.14.0004.zip - (373.2 KB)
modded_hboot_1.14.0005.zip - (373.6 KB)
modded_hboot_2.15.0000.zip - (400.9 KB)
modded_hboot_2.16.0000.zip - (398.6 KB)
Thx goes to: touch of jobo XDA Post Source
DISCLAIMER:this is not my work. i have tested it on my own device,but use it at your own risk. if it melts your phone into a lil pile of goo,its not my fault.
Greetings by Idijt
Hi everyone,
My A9 originally has CID TELST001 and MID 2PQ910000 (S-off and unlocked bootloader). I followed this guide (https://forum.xda-developers.com/one-a9/development/s-off-convert-to-htc-usa-unlocked-1-12-t3271861) to convert it to US model (CID: BS_US001 and MID: 2PQ912000)
I stopped at step 3, just go back to stock with RUU which I downloaded from HTC website (and I did lock bootloader when running RUU while keeping CID and MID as US model). However, the red text regarding to development purpose keeps appearing when I reboot the phone. Is it related to s-off status? From what I have read so far, as long as the kernel is stock then the red message should be gone. However, in my case, restoring via stock RUU does not erase the red message
Would someone please let me know if I did something wrong with RUU process? Cheers
As long as kernel,system and recovery is all stock the message should disappear... There is no reason to relock bootloader if s-off when running an ruu. Did you revert back to telstra ruu or use the unlocked developer ruu? Possible if ran ruu for telstra and kept unlocked cid/mid,maybe cause of your issue... Not sure though... Could be wrong...
Wonders_Never_Cease said:
As long as kernel,system and recovery is all stock the message should disappear... There is no reason to relock bootloader if s-off when running an ruu. Did you revert back to telstra ruu or use the unlocked developer ruu? Possible if ran ruu for telstra and kept unlocked cid/mid,maybe cause of your issue... Not sure though... Could be wrong...
Click to expand...
Click to collapse
I ran unlocked/developer RUU actually, since Telstra does not release RUU for A9. I guess this is the problem. Even with official firmware, if original CID does not match the firmware, it will trigger the red message. I have no idea how to test this theory until I get ahold of TELST001 RUU (which is unfortunately impossible atm)
Change cid/mid to Developer/Unlocked and rerun Developer RUU, If you have run the RUU the firmware is converted to Developer/Unlocked...If converted you really do not need anything from Telstra on the phone...If you have CID 11111111...Change to one below...If you have twrp installed... Replace with stock recovery
MID: 2PQ912000
CID: BS_US001