TF700T Screen hinge tightness - Asus Transformer TF700

Hello,
I just got my Transformer Infinity TF700T. I tested it over an hour and am frankly quite happy with it, except one minor issue.
The hinge near the lower left corner is not tight, i can easily press it down a bit. It did pop up a little. There's no gap between the silver back cover and the front screen, it's just the back cover which doesn't firmly attach to the main body i believe.
Can other TF700T owners verify this issue ? Is it a manufacturer's defect ?
Thank you.

I'm a little bit confused by your post.. Are you referring to the hinge with the dock or just the corner of the tablet itself?
I have no gaps or "pops" when I press around the edges of my tablet. Maybe if you take a picture or give some more details I can confirm again for you if I have, or not, experienced the same.
Sent from my ASUS Transformer Pad TF700T using xda app-developers app

My TF700 is pretty snug in the hinge that makes the screen able to 'clamshell' with the dock. There is a little leeway in pulling and jerking, but not too much, so I'd call it secure. Since it has to be nice to the connecting sockets as well, I do not know if a a really tight connection could be feasible; I'd imagine you'd need a least a minimal amount of wiggle room.

I just checked my own. I see what you mean. Im able to press the screen down 1mm right around that spot. The rest of the frame is solid.
Would be nice if more people checked this spot and posted results.
Sent from my ASUS Transformer Pad TF700T using Tapatalk 2

Well, mine is as tight on the left as on the right -- I really can't spot any difference. There's less leeway than I originally thought (I didn't have the dock with me at that particular moment, so I posted off of memory). It's pretty tight. Does the locking mechanism go all the way to the right for you?

I don't have a dock yet.
Sent from my ASUS Transformer Pad TF700T using Tapatalk 2

Same thing here all around the edge press it down and kinda float up and down meaning it is not firmly attached and it has been on a not stable mount or uneven surface.
Glue?
Interesting because I noticed it as soon as I opened the package.
What's with the QC of the products..

Screen hinge tightness
fool2x said:
Same thing here all around the edge press it down and kinda float up and down meaning it is not firmly attached and it has been on a not stable mount or uneven surface.
Glue?
Interesting because I noticed it as soon as I opened the package.
What's with the QC of the products..
Click to expand...
Click to collapse
I gotta be honest..I'm really confused. Reading the title, "Screen hinge tightness" .. are you (collectively, all of you) talking about the dock hinge, the display, or something else? Thank you in advance for helping me to understand.

fool2x said:
Same thing here all around the edge press it down and kinda float up and down meaning it is not firmly attached and it has been on a not stable mount or uneven surface.
Glue?
Interesting because I noticed it as soon as I opened the package.
What's with the QC of the products..
Click to expand...
Click to collapse
I'm 'glad' that i'm not the only person I intended to send it back but there's no guarantee that the replacement will not have the same issue.
To be fair, i would expect a much more solid product for such amount of cash

edrodata said:
I gotta be honest..I'm really confused. Reading the title, "Screen hinge tightness" .. are you (collectively, all of you) talking about the dock hinge, the display, or something else? Thank you in advance for helping me to understand.
Click to expand...
Click to collapse
The 'hinge' i refered to was between the back (gray/gold) cover and the screen. I can press the screen down a little bit at the edge of the tablet.
I believe at least 3 other owners have reported the same issue, particularly in the same place as well.

akka243 said:
The 'hinge' i refered to was between the back (gray/gold) cover and the screen. I can press the screen down a little bit at the edge of the tablet.
I believe at least 3 other owners have reported the same issue, particularly in the same place as well.
Click to expand...
Click to collapse
That's not called a hinge
Sent from my SAMSUNG-SGH-I727 using xda premium

ian1 said:
That's not called a hinge
Sent from my SAMSUNG-SGH-I727 using xda premium
Click to expand...
Click to collapse
Of course it's NOT called a "hinge"!!! THIS is what a HINGE is: http://en.wikipedia.org/wiki/Hinge
Does it look anything like what you're describing here? Learn English? Maybe???

starsie said:
Of course it's NOT called a "hinge"!!! THIS is what a HINGE is: http://en.wikipedia.org/wiki/Hinge
Does it look anything like what you're describing here? Learn English? Maybe???
Click to expand...
Click to collapse
Uhh ya that's what I just said bud
Sent from my SAMSUNG-SGH-I727 using xda premium

As I said, tight as a..... well, ermmmm.... tight thingy. Please keep it on-topic, guys -- this is not an English linguistics forum, and a lot of members are from non-natively English-speaking countries (like yours truy is), so this is bound to end in an academical discussion, totally irrelevant to the (potential) issue at hand. Thank you.

MartyHulskemper said:
As I said, tight as a..... well, ermmmm.... tight thingy. Please keep it on-topic, guys -- this is not an English linguistics forum, and a lot of members are from non-natively English-speaking countries (like yours truy is), so this is bound to end in an academical discussion, totally irrelevant to the (potential) issue at hand. Thank you.
Click to expand...
Click to collapse
You can actually call something that hold itself together in a loosely fashion as a "Hinge".
Which is exactly what the title of this post referring to.

I can also confirm this issue. Just got mine yesterday. I uploaded a pic of where I have to press down, just above the microHDMI port. Would be interesting to know if ASUS sees this as manufacturing defect.
Cheers,
Rich

Hmmm... At first I only had this problem down in the left corner by the docking hinge. Now I suddenly have it all along the bottom. Anyone else seen a difference over time?

fool2x said:
Same thing here all around the edge press it down and kinda float up and down meaning it is not firmly attached and it has been on a not stable mount or uneven surface.
Glue?
Interesting because I noticed it as soon as I opened the package.
What's with the QC of the products..
Click to expand...
Click to collapse
You have to read the Transformer Prime area if you want to learn more about QC and Asus products. I don't think their QC line has changed at all coming from the Prime. Probably the same people.

I have this tablet for 3 weeks now and today I noticed the problem described in this topic.
I'll wait with a RMA or anything because I'm not sure if the replacement will fix this and if it will be back before my holiday. Let's hope it won't get worse.
Sent from my ASUS Transformer Pad TF700T using xda premium

I have that problem near the hdmi slot and also near the power button.

Related

Origami cover for Prime

I'm not sure if this actually has magnets to hold it in place (I sure hope so), but it looks pretty cool nonetheless:
http://www.theverge.com/2011/11/17/2568209/asus-smart-cover-origami-folding
There is a forum for the prime ,and in that forum is a subforum for accessories.
Sent from my Transformer TF101 using xda premium
where is this mythical prime forum?
tshoulihane said:
where is this mythical prime forum?
Click to expand...
Click to collapse
I think it's right next to the unicorn stables...
superGOAT said:
There is a forum for the prime ,and in that forum is a subforum for accessories.
Sent from my Transformer TF101 using xda premium
Click to expand...
Click to collapse
although there isnt a forum for prime YET he's right. We dont really need new threads everyday about prime stuff in the tf101 forum. Besides people do frequent other sites besides xda. not trying to start anything im just sayin...
uploder said:
although there isnt a forum for prime YET he's right. We dont really need new threads everyday about prime stuff in the tf101 forum. Besides people do frequent other sites besides xda. not trying to start anything im just sayin...
Click to expand...
Click to collapse
I admit that I was a bit excited and should have at least posted in the accessories forum. However, I think that there's a great deal of interest in the Prime (of course), and I thought this cover was unique and innovate enough to point out. It demonstrates how much thought ASUS seems to be putting into the Prime, which is a real positive.
I have been playing with this same concept for the TF101. I would love to get my hands on one of these to see how they are attaching it to the base.
I really want a VERY light weight cover just to protect the glass and give it a stand for our TF101, this might get the ball rolling for us to get something like it.
Agfadoc said:
I have been playing with this same concept for the TF101. I would love to get my hands on one of these to see how they are attaching it to the base.
I really want a VERY light weight cover just to protect the glass and give it a stand for our TF101, this might get the ball rolling for us to get something like it.
Click to expand...
Click to collapse
If I had to guess, there are tabs that slip into the slots where the docking station latches fit.
wynand32 said:
If I had to guess, there are tabs that slip into the slots where the docking station latches fit.
Click to expand...
Click to collapse
Amazing idea! Ideal solution. Why the hell aren't they doing that? Hell just a spring loaded rod with 2 hooks.
G2x - 2.3.7 CM7
Transformer - 3.2 Revolver OC/UV
The latch should be very similar on the prime as it is on the TF101, except for the depth of the distance from latch to screen.
Would be nice to modify to fit ours, or better yet, make one specifically for it.
Sent from my PC36100 using Tapatalk
wynand32 said:
I'm not sure if this actually has magnets to hold it in place (I sure hope so), but it looks pretty cool nonetheless:
http://www.theverge.com/2011/11/17/2568209/asus-smart-cover-origami-folding
Click to expand...
Click to collapse
I hope it doesn't have magnets. It's a pointless gimmick that only Apple would come up with. To save yourself a couple of seconds fitting a tab or two or pressing a power button, you now have a case that can accidentally wipe your credit card or damage an old-school CRT TV / monitor if you hold it too close. Niiice.
knoxploration said:
I hope it doesn't have magnets. It's a pointless gimmick that only Apple would come up with. To save yourself a couple of seconds fitting a tab or two or pressing a power button, you now have a case that can accidentally wipe your credit card or damage an old-school CRT TV / monitor if you hold it too close. Niiice.
Click to expand...
Click to collapse
Well, with this kind of cover, I'm not sure how it would function without a magnet. There's nothing to secure it to...
The magnet would have to be decently strong too, to wipe off your credit card magnetic stripe (or you put there for a long time or something).
asdfuogh said:
The magnet would have to be decently strong too, to wipe off your credit card magnetic stripe (or you put there for a long time or something).
Click to expand...
Click to collapse
I've seen multiple reports of even just the iPad itself wiping credit cards and hotel room keys. The cover contains twice as many magnets as the iPad does...
knoxploration said:
I hope it doesn't have magnets. It's a pointless gimmick that only Apple would come up with. To save yourself a couple of seconds fitting a tab or two or pressing a power button, you now have a case that can accidentally wipe your credit card or damage an old-school CRT TV / monitor if you hold it too close. Niiice.
Click to expand...
Click to collapse
You mean those tabs that always break after some use? I like the magnets idea!
PatrickVogeli said:
You mean those tabs that always break after some use? I like the magnets idea!
Click to expand...
Click to collapse
Well maybe if you stop using your electronic devices as hammers... I find mine stay in good shape, but then, I look after them.
I was LOLing reading about this on Engadget when some Apple iFans were saying it was "too complicated."
Still LOLing a little.
What's wrong with magnets?
The original Transformer has a huge magnet in the dock to let it know when it's closed
slient said:
What's wrong with magnets?
The original Transformer has a huge magnet in the dock to let it know when it's closed
Click to expand...
Click to collapse
The less of them, the better. I'd prefer a physical switch in the TF dock, too.
There are a hell of a lot more than one in the iPad 2 and Smart Cover, though. The iFixit teardown shows ten magnets in the iPad 2 body (four small ones in one side of the rear panel, four small and two large ones in the left side), and no less than 21 in the "Smart" Cover (two big, 18 small, and one tiny).
That's 31 magnets in an iPad 2 with cover, of which there are four large magnets, 26 small ones, and one tiny one.
http://www.ifixit.com/Teardown/iPad-2-Smart-Cover-Teardown/5089/1

[Q] TF300T screen click

I purchased the TF300T and have noticed the right side of the screen produces a click sound when applying a little pressure. Its bugging the crap out of me. Can any other 300 owners let me know if theirs produces something similar? I understand it is plastic and not perfect
Sound and location:
http://www.youtube.com/watch?v=725oYD9EscA
No clicking on mine.
My 201 makes the same sounds when releasing the pressure in the same area.
etnoo said:
I purchased the TF300T and have noticed the right side of the screen produces a click sound when applying a little pressure. Its bugging the crap out of me. Can any other 300 owners let me know if theirs produces something similar? I understand it is plastic and not perfect
Sound and location:
http://www.youtube.com/watch?v=725oYD9EscA
Click to expand...
Click to collapse
Start an online petition. RMA it then demand Asus refund you directly.
a little Extreme huh? lmfao
Nefariouss said:
Start an online petition. RMA it then demand Asus refund you directly.
Click to expand...
Click to collapse
that was funny..SMH
Didn't notice a screen click on the one I played with at Best Buy, but did notice a lot of flexing and creaking in the plastic back. I literally, with very little squeeze, could squeeze the back in where I was touching together so that whatever innards there are attached to the back were touching those attached to the front. Didn't seem to make anything run poorly, or short out or anything, just felt a bit strange. I did like the rounder edges which are more comfortable than my prime.
I feel like the issue is just the cheap plastic back covering. When I got mine I noticed I could make parts of the back plate click too. does that mean the back cover can come off? To scared to try and maybe a should just rtfm. Lol
Sent from my ADR6300 using xda premium
hold it in portrait with your right hand, with your thumb over the asus logo and squeeze a little.
not sure if it will click but it might make the screen turn off and/or reboot.
Sent from my ASUS Transformer Pad TF300T using Tapatalk 2
Mine does the same but on the left side.
I have similar but much worse symptoms. Returning it. Details here.

Rubber covers on bottom of tablet?

I received my 700 with the 2 rubber keyboard covers missing from the bottom. It may be trivial but, my concern is that dust my find its way under the screen. Has anyone else received their tablet this way? One other question, I have several areas along the bottom of the screen that have notable screen bleed during boot up. Do others have any screen bleeding?
Sent from my ASUS Transformer Pad TF700T using Tapatalk 2
No covers on mine also.
No screen bleeding.
Gorilla glass seems not to be well glued. Sometimes when i squeeze top left corner of the screen black frame, it clicks.
KangLx said:
No covers on mine also.
Click to expand...
Click to collapse
I wonder why that is? The TF 201 had them.
Sent from my ASUS Transformer Pad TF700T using Tapatalk 2
KangLx said:
No covers on mine also.
No screen bleeding.
Gorilla glass seems not to be well glued. Sometimes when i squeeze top left corner of the screen black frame, it clicks.
Click to expand...
Click to collapse
I have no issues with the screen being glued, just the bleeding at boot up. I had the same issues with screen bleeding on the TF 201. Went thru several replacements and still could not find one without any screen bleeding. Some better than others but none without any.
Sent from my ASUS Transformer Pad TF700T using Tapatalk 2
My TF700 came with two rubber covers to close off the attachment holes the dock pins go into, I believe that is what you are referring to, right, OP? Shame you're probably not based in the Netherlands, as I do not need them and would gladly give them away.
I've heard that Asus discontinued their use after a lot of prime owners tried to dock their tablets without taking the rubber feet out.
MartyHulskemper said:
My TF700 came with two rubber covers to close off the attachment holes the dock pins go into, I believe that is what you are referring to, right, OP? Shame you're probably not based in the Netherlands, as I do not need them and would gladly give them away.
Click to expand...
Click to collapse
Yes, that's wat I'm referring to. Thanks for the thought, not a big deal just found it unusual as the TF201 had them and the TF700 does not.
Sent from my ASUS Transformer Pad TF700T using Tapatalk 2
Jotokun said:
I've heard that Asus discontinued their use after a lot of prime owners tried to dock their tablets without taking the rubber feet out.
Click to expand...
Click to collapse
Makes sense, thanks for the reply.
Sent from my ASUS Transformer Pad TF700T using Tapatalk 2
Wow nice info thanks.
I really hope that I get those rubber thingys as I do not plan to use the dock.
Is there a rubber thing for the connector too?
Maybe I should make my own?
You could always get the transleeve as it plugs up the ports nicely. the only other option I can think of is to put tape over them or find piece of silicone that might fit in the holes.
Also DarsVaeda mine came with a plastic thingy to fits into the charging port. No silicone nubs in the holes for the keyboard though.
Okay I guess I'll have to wait and see but there is hope
Thanks!
reluttr said:
You could always get the transleeve as it plugs up the ports nicely. the only other option I can think of is to put tape over them or find piece of silicone that might fit in the holes.
Also DarsVaeda mine came with a plastic thingy to fits into the charging port. No silicone nubs in the holes for the keyboard though.
Click to expand...
Click to collapse
Yeah not a big deal, just thought that Asus forgot to put them on mine. Thanks
Sent from my ASUS Transformer Pad TF700T using Tapatalk 2
My tf700 also came without covers, but that's been discussed here before and I didn't expect them. However I do have a bit of backlight bleed at the bottom of the screen, but it doesn't bother me as it's only noticeable when you are on a black screen, or at bootup.
modulator03 said:
My tf700 also came without covers, but that's been discussed here before and I didn't expect them. However I do have a bit of backlight bleed at the bottom of the screen, but it doesn't bother me as it's only noticeable when you are on a black screen, or at bootup.
Click to expand...
Click to collapse
Did not see where it was discussed before, I think a good potion of these tablets not only Asus have some sort of screen bleed. Most of the time what you have stays that way, but I know of people who had minor scree bleeding and it got worse.
Sent from my TF700 using Tapatalk
grneyez said:
Most of the time what you have stays that way, but I know of people who had minor scree bleeding and it got worse.
Click to expand...
Click to collapse
Hm.. I hope it doesn't worsen in the future. I've owned many other screens (monitors and tv's) with slight bleeding that where hardly noticeable and didn't worsen. Hopefully that's the case with this.
DarsVaeda said:
Is there a rubber thing for the connector too?
Click to expand...
Click to collapse
There is a plastic plug/cover for the connector. I'm sure it will eventually get lost.
modulator03 said:
Hm.. I hope it doesn't worsen in the future. I've owned many other screens (monitors and tv's) with slight bleeding that where hardly noticeable and didn't worsen. Hopefully that's the case with this.
Click to expand...
Click to collapse
Let's hope so.
Sent from my ASUS Transformer Pad TF700T using Tapatalk 2
You know I wonder why asus did not put a spring loaded mechanism in the docking holes. You know kinda like the thing in a PeZ dispenser, when you put the tablet on the dock it would push them in the tablet and when you undock it the covers spring back in place.
reluttr said:
You know I wonder why asus did not put a spring loaded mechanism in the docking holes. You know kinda like the thing in a PeZ dispenser, when you put the tablet on the dock it would push them in the tablet and when you undock it the covers spring back in place.
Click to expand...
Click to collapse
Very good idea... That would be a nice solution....
By the way, does anyone else find the USB port "cover" on the dock almost impossible to remove??? I eventually just left it out as it makes the USB port *very* frustrating to use!
I too have some light bleed on the bottom of my TF700. It's really only noticeable on the black boot-up screen though (I guess the backlight is at full brightness during boot-up?)
Sent from my ASUS Transformer Pad TF700T using Tapatalk 2
The case I ordered kind of takes care of this for me:
http://www.amazon.com/gp/product/B008FP3LZ8
I don't plan on using a case when I dock it anyway, so that should be fine. I think it's beneficial for people who don't plan on using a dock, so the case they chose can be a more permanent solution.

dropped my baby

I had my tf700 in the dock on my lap. Being top heavy, it fell backwards off of my lap. A 2 foot fall on to a concrete floor killed it. It seemed to fall in slow motion as i screamed "nooooooo." Screen went dead, now it wont turn on at all. So off to Best Buy i go to use my warranty. Its gonna be a long week waiting.
Ohh. Not good. Hope you get your replacement.
(but if not, I hope for a video of the dissection)
I think all of us would prefer if Asus installed a battery in the dock large enough to make the dock twice as heavy as the tablet to prevent things like this happening. A little more weight for extra security and battery life? What's not to love?
warranty? not sure that would work my friend. it's not a general insurance policy, it's valid in case the tablet has problems NOT caused by the user...
Good luck anyways. I truly feel for you.
nadram said:
warranty? not sure that would work my friend. it's not a general insurance policy, it's valid in case the tablet has problems NOT caused by the user...
Good luck anyways. I truly feel for you.
Click to expand...
Click to collapse
I'm assuming he meant that he purchased the Best Buy extended warranty (or whatever it's called), which even covers damage caused by the user...
Sent from my ASUS Transformer Pad TF700T using Tapatalk 2
Sorry to hear about the damage OP, hope it works out. I think I remember HTC or someone having a patent on a smartphone airbag. Sounds like that would have come in handy.
Cleanskinned said:
I think all of us would prefer if Asus installed a battery in the dock large enough to make the dock twice as heavy as the tablet to prevent things like this happening. A little more weight for extra security and battery life? What's not to love?
Click to expand...
Click to collapse
Another angle is to add surface area to the base behind the hinge. A slide-out stabilizer is tough given way the hinge juts below the bottom of the keyboard, but a flip-out stabilizer is still possible while retaining the ultra-book appearance of the device. And I'd love to have that option. A bigger battery would be nice too though.
fortunz said:
Sorry to hear about the damage OP, hope it works out. I think I remember HTC or someone having a patent on a smartphone airbag. Sounds like that would have come in handy.
Another angle is to add surface area to the base behind the hinge. A slide-out stabilizer is tough given way the hinge juts below the bottom of the keyboard, but a flip-out stabilizer is still possible while retaining the ultra-book appearance of the device. And I'd love to have that option. A bigger battery would be nice too though.
Click to expand...
Click to collapse
I'm sure we can find a way to modify our docks to be a little heavier. Just slip a weight on it lol
Sent from my ASUS Transformer Pad TF700T using xda app-developers app
Thinking of adding a thin line of
KilerG said:
I'm sure we can find a way to modify our docks to be a little heavier. Just slip a weight on it lol
Sent from my ASUS Transformer Pad TF700T using xda app-developers app
Click to expand...
Click to collapse
I'm thinking of gluing a thin sheet of metal or a flattened wire to the from lower front edge of the keyboard. It will have to be smooth and probably less than 1mm thick. At the moment I'm just thinking about different alternatives and how they might afflict the aesthetics of the unit.
Cleanskinned said:
I think all of us would prefer if Asus installed a battery in the dock large enough to make the dock twice as heavy as the tablet to prevent things like this happening. A little more weight for extra security and battery life? What's not to love?
Click to expand...
Click to collapse
Dock is heavy enough.
And I'll bet none of you with your extra weight remedy will do what you just suggested -
Glad u got the warranty (only sensible thing in the thread)

Screen Flex

Yes yes, I know we have had threads about it before, but what exactly is the bit that is flexing? The glass flexes, but is it the adhesive that connects it to the LCD or is it the whole body that is connected through the plastic clips. Since my warranty is bugged, and the ASUS guy had to tell me that with the unlocked bootloader, I get no warranty even if its not related to the software at all, like the screen. He said unlocking it actually roots the device. Well my friend, I am pretty sure you're wrong. But anyway, enough fuming about QC, we need to be productive and try to think of a fix, aside from opening it up. I am thinking if it is connected by adhesive, and that is what is flexing (I think it would be because for the plastic clips to just break suddenly seems a it ridiculous) would it be possible to maybe heat it up with a hair dryer and then press it back down until the adhesive sticks again? Just my thoughts, can't stand this clicking. Any other ideas?
Sent from my ASUS Transformer Pad TF700T using xda app-developers app
I,d actually open it if I new how. It just bugs me so much.
Sent from my ASUS Transformer Pad TF700T using xda app-developers app
mdemons12 said:
Yes yes, I know we have had threads about it before, but what exactly is the bit that is flexing? The glass flexes, but is it the adhesive that connects it to the LCD or is it the whole body that is connected through the plastic clips. Since my warranty is bugged, and the ASUS guy had to tell me that with the unlocked bootloader, I get no warranty even if its not related to the software at all, like the screen. He said unlocking it actually roots the device. Well my friend, I am pretty sure you're wrong. But anyway, enough fuming about QC, we need to be productive and try to think of a fix, aside from opening it up. I am thinking if it is connected by adhesive, and that is what is flexing (I think it would be because for the plastic clips to just break suddenly seems a it ridiculous) would it be possible to maybe heat it up with a hair dryer and then press it back down until the adhesive sticks again? Just my thoughts, can't stand this clicking. Any other ideas?
Sent from my ASUS Transformer Pad TF700T using xda app-developers app
Click to expand...
Click to collapse
I have heard that leaving it in the sun until it gets pretty warm, and then putting a fairly heavy, flat object (a big art book, let's say) on it (while your tablet is lying on a blanket or something soft/smooth) may melt, re-attach the adhesive. If you do this, please be careful, lest you end up with a worse problem. And as always--I AM NOT RESPONSIBLE, blah, blah, blah.
Good luck!
OK, may actually try this today. Hope it all goes well:-\ I think to also add to my theory, it always seems better during the day, when its warmer. Or maybe it could be cos I have used it less.
Sent from my ASUS Transformer Pad TF700T using xda app-developers app
I tried it, not really too successful though. I don't think the pressure was applies to directly to the sport with the books, probably needs a clamp.
Sent from my ASUS Transformer Pad TF700T using xda app-developers app
mdemons12 said:
I tried it, not really too successful though. I don't think the pressure was applies to directly to the sport with the books, probably needs a clamp.
Sent from my ASUS Transformer Pad TF700T using xda app-developers app
Click to expand...
Click to collapse
then try the clamp. maybe put a clamp on the opposite side too.
Don't think I have one the right sport of size
Sent from my ASUS Transformer Pad TF700T using xda app-developers app
Well now there seem to be enough give in it to allow for the glass to hit the LCD and make all the colours mix like on a desktop monitor, wondering if it been this bad is going to be able to damage the LCD.
I heated mine up with a blow dryer on low, folded up a paper towel many times so it was about the size of the screen border, then used a sandwich clip on top of the folded paper towel to apply pressure and avoid scratching. Result, seems better so far but I just finished the experiement. We'll see if it holds.
CeeJayII said:
I heated mine up with a blow dryer on low, folded up a paper towel many times so it was about the size of the screen border, then used a sandwich clip on top of the folded paper towel to apply pressure and avoid scratching. Result, seems better so far but I just finished the experiement. We'll see if it holds.
Click to expand...
Click to collapse
keep us posted if it holds and really works.i might do the same to see if i can get rid of the clicking noise on the right bottom corner
Sent from my ASUS Transformer Pad TF700T using xda premium
Guess we're back to the drawing board. It didn't hold but I have hope now. Maybe I will heat it up a little pore next time. I was pretty cautious and didn't heat it too much the first time. It's kinda nerve racking, why the hell do I have to do this in the 1st place! I don't want to return this one, it is my 4th from Best Buy. 1st had screen bleed, 2nd had no bleed but a loud vibrator that rattled, 3rd has worse bleed than 1st, 4th has a lifted screen on left side and creeks sometime when being picked up (I think it's the camera). If this were a cheap device I would accept flaws but for $500 I expect more!
I feel your pain. Everyone I show can notice the problem but say öh, its not that bad, live with it". Its really bad when you spend over $500, you expect a lot better.
Last night i was using my TF700 before i go bed i kinda hold it on the "ASUS" front branding..then i heard a click, the screen keep making the clicking sound every time i press on the last S on the asus name. that thing bothers me the whole night. my TF700 was 3 days old.
I went to best buy today 3pm and exchange it for another one...turns out i got a bad light bleeding above the home button. so i went back to best buy around 8pm to exchange again. the lady and another guy try to look where the light bleed coming out then ending up giving me an exchange with out giving me a hard time. I open the new tf700 inside bestbuy (in-front of the bestbuy employees) i tried to see if i got more bleeding..i still seeing the light bleed near the home button. decided to go home to see if i got worst light bleeding this time... since bestbuy store is pretty bright. I got home and YES i got the worst light bleeding of all the tf700 (3) i got. i will return the tf700 tomorrow or exchange it with IPAD 3.
Sucks that i just purchased 20ft HDMI and Slim case for the TF700. thats $40 of accessories. (both on the way to me)
I Love TF700 but im tired..LOL
The people at best buy are going to think I'm insane. I returned my clicking one, just to get one with bad screen bleed in the lower left hand corner again. I know bleedless units exist, I had one. It just clicked and the screen flexed. Between the 5 units (yes 5) that I've had, not one has gotten everything right. I would have gotten a Note by now but I have a dock that I want to take advantage of. Maybe I'll just sell.... This is ridiculous. I really just want a 100% working tf700.
I know too that theres a GOOD TF700 is out there... thats why im not settling for the 1 with flaw. I purchased the Note 10.1 last Aug.19 exchange it for tf700 the next day. that TF700 was GOOD until my son dropped it on a carpeted floor and then the TF700 showed some light bleeding so decide to get my money back the next day... purchased another TF700 which is the 1 that click--- Story ^ up there.
raffstyle said:
I know too that theres a GOOD TF700 is out there... thats why im not settling for the 1 with flaw. I purchased the Note 10.1 last Aug.19 exchange it for tf700 the next day. that TF700 was GOOD until my son dropped it on a carpeted floor and then the TF700 showed some light bleeding so decide to get my money back the next day... purchased another TF700 which is the 1 that click--- Story ^ up there.
Click to expand...
Click to collapse
Mine is perfect, from BestBuy in Boston. It is a Amethyst Grey 32GB C7 unit . What exact model/month are the ones you are reporting with problems? That could be a clue. Like, are they 64GB? Gold? C6?
All Gray, all C, all 32gb..... Got a new one that is pretty flawless so far, knock on wood. Took long enough. No clicks, no bleed, no flex. This is what all I wanted, geez.....
It's okay guys. I'm going to be exchanging my 700t, the 7th time now.
Good luck on #7, #6 was the keeper for me. Best Buy is pretty great about returns....
CeeJayII said:
All Gray, all C, all 32gb..... Got a new one that is pretty flawless so far, knock on wood. Took long enough. No clicks, no bleed, no flex. This is what all I wanted, geez.....
Click to expand...
Click to collapse
Hmmm, there goes my theory...
Anyway, so happy you got a good one!

Categories

Resources