Database Info

Updating ROMs

I've looked around for a little while and can't find any thread that says how to go from one build of a custom ROM to another... I feel extremely noobish asking this as well. I'm on build 11 of bean's custom JB ROM and there have been three new builds and I'm wondering if I need to do a full wipe as if I were flashing a ROM from stock, or if I just go ahead and do a dirty flash... Thanks in advance for the help
Sent from my SCH-I535 using xda app-developers app

jonnyboiii said:
I've looked around for a little while and can't find any thread that says how to go from one build of a custom ROM to another... I feel extremely noobish asking this as well. I'm on build 11 of bean's custom JB ROM and there have been three new builds and I'm wondering if I need to do a full wipe as if I were flashing a ROM from stock, or if I just go ahead and do a dirty flash... Thanks in advance for the help
Sent from my SCH-I535 using xda app-developers app
Click to expand...
Click to collapse
It's really at your own discretion. You can dirty flash, but you might have issues, but clean flashes are always the best path to take. Although, sometimes the devs do recommend a clean flash on some releases when they change something major.
Sent from my SCH-I535 using xda app-developers app

Personally I always dirty flash. A couple of times I've encountered problems, made a backup then wiped to troubleshoot the problem, but its never fixed anything so I just revert to my backup. YMMV

Just read and follow the install instructions for the specific rom.
Sent from my Galaxy SIII

PaulG1488 said:
Just read and follow the install instructions for the specific rom.
Sent from my Galaxy SIII
Click to expand...
Click to collapse
So you're saying I should do a clean wipe and start fresh?
Sent from my SCH-I535 using Tapatalk 2

jonnyboiii said:
So you're saying I should do a clean wipe and start fresh?
Sent from my SCH-I535 using Tapatalk 2
Click to expand...
Click to collapse
In a nutshell, yes
Sent from my SCH-I535 using xda app-developers app

jonnyboiii said:
So you're saying I should do a clean wipe and start fresh?
Sent from my SCH-I535 using Tapatalk 2
Click to expand...
Click to collapse
The OP usually tells you what you need to do. If there are major changes, they will tell you to wipe. Sometimes, dirty flashing is okay, just make sure that you follow the directions from the dev that created the ROM.
Sent from my SCH-I535 using xda premium

HHF2 said:
The OP usually tells you what you need to do. If there are major changes, they will tell you to wipe. Sometimes, dirty flashing is okay, just make sure that you follow the directions from the dev that created the ROM.
Sent from my SCH-I535 using xda premium
Click to expand...
Click to collapse
But if you encounter errors after dirty flashing, always do a full wipe and reflash before reporting them.
Sent from my GT-I9300 using Tapatalk 2

Just dirty flash it. Backup your apps and etc... prior just in case you do run into issues.

jonnyboiii said:
I've looked around for a little while and can't find any thread that says how to go from one build of a custom ROM to another... I feel extremely noobish asking this as well. I'm on build 11 of bean's custom JB ROM and there have been three new builds and I'm wondering if I need to do a full wipe as if I were flashing a ROM from stock, or if I just go ahead and do a dirty flash... Thanks in advance for the help
Sent from my SCH-I535 using xda app-developers app
Click to expand...
Click to collapse
Format and flash.

As a general rule, I do an App backup (I tend to like My Backup Pro for app backups), a full nandroid backup, then dirty flash (wiping dalvik/cache) and see how it goes. Best case, everything works and I save myself a ton of time not having to restore apps/reapply settings. Worst case, if I have problems that don't seem to be generally reported, I do a full wipe and clean install.
jonnyboiii said:
I've looked around for a little while and can't find any thread that says how to go from one build of a custom ROM to another... I feel extremely noobish asking this as well. I'm on build 11 of bean's custom JB ROM and there have been three new builds and I'm wondering if I need to do a full wipe as if I were flashing a ROM from stock, or if I just go ahead and do a dirty flash... Thanks in advance for the help
Sent from my SCH-I535 using xda app-developers app
Click to expand...
Click to collapse

(Q) Brick bug?

I'm rooting a friends at&t skyrocket tomorrow that is on official ics update from at&t and was wondering if that brick bug was still present.I know i might be a little late with this. I was told by a friend that it was only present on the ics leaks for this phone and just wanted to make sure now that this has official ics that i won't have any problems worrying about a brick on my hands by wiping data factory reset in cwm. Go easy on me please I was on the OG evo when all of this brick stuff happened so I never payed much attention to it
Thanks in advance
Sent from my SPH-L710 using xda app-developers app

I could be wrong but I thought the bug was only present in the i777 gs2...
Sent from my SAMSUNG-SGH-I727 using xda premium

Vfan23 said:
I could be wrong but I thought the bug was only present in the i777 gs2...
Sent from my SAMSUNG-SGH-I727 using xda premium
Click to expand...
Click to collapse
I thought it was for all gs2 variants
Sent from my SPH-L710 using xda app-developers app

Regardless, wiping data/factory reset using cwm won't effect anything. I'm pretty sure that problem was the result of wiping in the phones settings menu (if I remember right).

btm fdr said:
Regardless, wiping data/factory reset using cwm won't effect anything. I'm pretty sure that problem was the result of wiping in the phones settings menu (if I remember right).
Click to expand...
Click to collapse
O okay wasn't it a kernel issue ? Like it had a erase command or something?
Sent from my SPH-L710 using xda app-developers app

evo4gnoob said:
O okay wasn't it a kernel issue ? Like it had a erase command or something?
Sent from my SPH-L710 using xda app-developers app
Click to expand...
Click to collapse
Honestly, i'm not sure. I never really worried about it. Always use CWM for wiping and never had a problem with anything.

I think it happens when you try to format the internal SD card. Its an emmc bug (I think) but I don't have the bug and my i777 doesn't have it. I thought it was on the specific kernel for the i777 and the international variants.
Sent from my SAMSUNG-SGH-I727 using xda premium

Thanks for the info guys hopefully nothing goes wrong when i try flashing AOKP on his phone when im done rooting it

evo4gnoob said:
Thanks for the info guys hopefully nothing goes wrong when i try flashing AOKP on his phone when im done rooting it
Click to expand...
Click to collapse
No sense in rooting if your gonna flash aokp. Just push cwm with Odin and flash away:thumbup: you can flash without rooting as long as you have a custom recovery installed
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2

evo4gnoob said:
Thanks for the info guys hopefully nothing goes wrong when i try flashing AOKP on his phone when im done rooting it
Click to expand...
Click to collapse
Just follow the sticky here - http://forum.xda-developers.com/showthread.php?t=1652398
Once you get it rooted with CWM, i'd suggest updating CWM to this version - http://forum.xda-developers.com/showthread.php?t=1777970
If you're looking for the JellyBean version of AOKP, i'd really suggest this - http://rootzwiki.com/topic/34092-aokp-unofficial-galaxy-s-ii-skyrocket-i727-nov-04-milestone-1/
As far as flashing it, I:
-wipe data/factory reset
-wipe cache
-mounts & storage [format /system]
-advanced [wipe dalvick cache]
-flash rom
-flash gapps
-reboot
*you can do these x2 or x3 each if you wish just to be sure everything is clear*
Hopefully some of this will help if you already don't know any of it. Any other questions, shoot me a pm if you need or i'm sure someone here can help.

cdshepherd said:
No sense in rooting if your gonna flash aokp. Just push cwm with Odin and flash away:thumbup: you can flash without rooting as long as you have a custom recovery installed
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
Click to expand...
Click to collapse
i know its that he wants to backup apps ect so i need root to use titanium backup before i start wiping and flashing

btm fdr said:
Just follow the sticky here - http://forum.xda-developers.com/showthread.php?t=1652398
Once you get it rooted with CWM, i'd suggest updating CWM to this version - http://forum.xda-developers.com/showthread.php?t=1777970
If you're looking for the JellyBean version of AOKP, i'd really suggest this - http://rootzwiki.com/topic/34092-aokp-unofficial-galaxy-s-ii-skyrocket-i727-nov-04-milestone-1/
As far as flashing it, I:
-wipe data/factory reset
-wipe cache
-mounts & storage [format /system]
-advanced [wipe dalvick cache]
-flash rom
-flash gapps
-reboot
*you can do these x2 or x3 each if you wish just to be sure everything is clear*
Hopefully some of this will help if you already don't know any of it. Any other questions, shoot me a pm if you need or i'm sure someone here can help.
Click to expand...
Click to collapse
i already had that version of aokp and have everything installed and in a folder im prepared . And that the same process i use on my GS3 but i use TWRP. Yea i was looking at that updated version i was gonna flash TWRP through odin for his phone but looks like CWM touch looks better on this phone then it was for my original evo and GS3
edit: do you have any kernel recommendations for this phone? I was gonna flash this kernel http://forum.xda-developers.com/showthread.php?t=1949828 but i dont have this phone so i wouldnt really know which kernel work best. He really wants to overclock so thats the only preference he wants to be able to do

Hi, I used this method for my gs2 international. Using the zip method of Cwm and it worked without problems. http://forum.xda-developers.com/showthread.php?p=28178105 The big bug is also details in the links. Good luck.
Sent from my GT-I9100 using xda app-developers app

Macros_the_Black said:
Hi, I used this method for my gs2 international. Using the zip method of Cwm and it worked without problems. http://forum.xda-developers.com/showthread.php?p=28178105 The big bug is also details in the links. Good luck.
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
thanks ill be sure to take a look at it

evo4gnoob said:
i know its that he wants to backup apps ect so i need root to use titanium backup before i start wiping and flashing
Click to expand...
Click to collapse
Make sure not to restore system apps.
evo4gnoob said:
i already had that version of aokp and have everything installed and in a folder im prepared . And that the same process i use on my GS3 but i use TWRP. Yea i was looking at that updated version i was gonna flash TWRP through odin for his phone but looks like CWM touch looks better on this phone then it was for my original evo and GS3
edit: do you have any kernel recommendations for this phone? I was gonna flash this kernel http://forum.xda-developers.com/showthread.php?t=1949828 but i dont have this phone so i wouldnt really know which kernel work best. He really wants to overclock so thats the only preference he wants to be able to do
Click to expand...
Click to collapse
I always use the stock kernel. I don't mess with oc/uv or anything. I don't see a need for it.
evo4gnoob said:
thanks ill be sure to take a look at it
Click to expand...
Click to collapse
Personally, i'd stick with the Odin method.

btm fdr said:
Make sure not to restore system apps.
I always use the stock kernel. I don't mess with oc/uv or anything. I don't see a need for it.
Personally, i'd stick with the Odin method.
Click to expand...
Click to collapse
im aware that you should never restore system apps. Hmm looks like i have to test these kernels out on his phone and yea odin method is the method i used to root a friends Skyrocket a while back

evo4gnoob said:
yea odin method is the method i used to root a friends Skyrocket a while back
Click to expand...
Click to collapse
Me me me me....hi Albert
----------------------------------------------
Sent from my Skyrocket i727 running Liquid
One does not simply use the search button

Mike on XDA said:
Me me me me....hi Albert
----------------------------------------------
Sent from my Skyrocket i727 running Liquid
One does not simply use the search button
Click to expand...
Click to collapse
Stalking smh
Sent from my SPH-L710 using xda app-developers app

[ROM][ICS][UCLI3][09-NOV-2012] Stock odexed & deodexed UNTOUCHED

This is NOT a Custom ROM
Please do NOT ask for MODS or any such nonsense​
What is it?
Click to expand...
Click to collapse
It is the official ICS AT&T update from OCT, 2012, UCLI3. I have just packaged two versions odexed and deodexed, you can choose to install whichever one you wish. Please choose only one.
It is untouched and requires full data wipe/system wipe. No root or busybox, see downloads for those.
I have provided these for those who like to run the official ATT/Samsung Stock offering.
Radio
Click to expand...
Click to collapse
This will update the radio to UCLI3.
Kernel
Click to expand...
Click to collapse
This will also update the to the stock UCLI3 Kernel (3.0.8-1127534). If you wish init.d support and boot-animation, see the downloads section for the modified ucli3 boot image. Please do NOT ask for bln and other non-sense. You can use my custom kernel Cymbaline for that.
Why odexed version?
Click to expand...
Click to collapse
You would need the odexed version (along with the recovery, separate download) to recieve any updates.
Why deodexed version?
Click to expand...
Click to collapse
If you wish to do custom mods, then this is the version you need.
Requirements
Click to expand...
Click to collapse
ʘ You would need clockwork mod recovery already installed. I have ONLY verified with the touch recovery. Please DO NOT complain if whatever recovery you are using cannot flash this properly. I will ignore all those posts.
ʘ ALWAYS ALWAYS check the md5sum.
ʘ Make sure you do a Nandroid backup, so you can restore your previous ROM. If you don't know what this means. STOP. I repeat for christ's sake STOP, you should not be flashing anything.
Downloads
Click to expand...
Click to collapse
ʘ [ROM][ODEXED][09-NOV-2012] See the installation instructions.
ATT-UCLI3-odexed-cwm.zip
ʘ [ROM][DEODEXED] See the installation instructions. Coming soon.
ATT-UCLI3-deodexed-cwm.zip
ʘ [ADDON][SU-BUSYBOX][09-NOV-2012] See the installation instructions.
busybox-su-pack-cwm5.zip
ʘ [ADDON][KERNEL][09-NOV-2012] See the installation instructions.
kernel-ucli3-sgh-i727-RD01-cwm.zip
ʘ [ADDON][RECOVERY] See the installation instructions. You needs to receive OTA updates. Coming soon.
Installation
Click to expand...
Click to collapse
This is pretty simple.
- Make sure you download the ROM to the phone. (and any other add-ons).
- Backup. Backup.
- Verify md5sum.
- Boot into CWM recovery.
- Format System.
- Wipe Data and Cache Partition.
- Select the downloaded zip.
- Install.
- [OPTIONAL] If you want root. Install the su-busybox zip in the Downloads section. YOU WOULD STILL NEED TO DOWNLOAD AND INSTALL AFTER BOOT SuperSU or Superuser from PLAY STORE.
- [OPTIONAL] If you want the modified boot-image to support boot anim and other init.d functionality (you need busybox see above, for this). Flash the modified kernel/boot-image zip from the downloads.
- Boot and wait for at least 5-10 minutes.

reserved
reserved

reserved second
reserved second

wow nyc

which one is the no ril new radio. i did not find the download link for that. thanks mohan

is this a new modem? if so can you pull it out and make a flash able zip, so users can update their modems without flashing the ics build
Many thanks

mjwhirly said:
is this a new modem? if so can you pull it out and make a flash able zip, so users can update their modems without flashing the ics build
Many thanks
Click to expand...
Click to collapse
Someone has already posted a flashable zip for the new radio. Id post it if i wasn't on my phone.
Sent from my SGH-I727 using xda app-developers app

Mohan, can I apply root and su to the odexed version?
Sent from my SAMSUNG-SGH-I727 using xda app-developers app

smully1 said:
Mohan, can I apply root and su to the odexed version?
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
Click to expand...
Click to collapse
Yes
Sent from my SAMSUNG-SGH-I727 using XDA

smully1 said:
Mohan, can I apply root and su to the odexed version?
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
Click to expand...
Click to collapse
Yes you can if notice second download has busybox and su flash that pack then download superuser from market
Sent from my SGH-I727 using xda premium

OK thanks. I wasn't sure if I needed the deodexed or not.
Sent from my SAMSUNG-SGH-I727 using xda app-developers app

smully1 said:
OK thanks. I wasn't sure if I needed the deodexed or not.
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
Click to expand...
Click to collapse
Nope simply flash and run like hell
Sent from my SGH-I727 using xda premium

Running the odexed rooted. Pretty smooth and good battery life so far. Not all the bells and whistles but very stable!
Sent from my SAMSUNG-SGH-I727 using xda app-developers app

Does stock have a way to turn off noise cancellation?
Sent from my SAMSUNG-SGH-I727 using xda app-developers app

Pulled the modem and tried it. Data seems to be stuck on 3G even though I am in Seattle with 4G. Calls sound so-so, not great and not bad either. Data works, tested using web browser to open a web page.
Try at your own risk, make sure you've got a backup and know how to reflash your previous modem if needed.
Link: http://d-h.st/QRa

Seems the 3g thing was temporary, had 4g all day today.
Sent from my SGH-I727 using xda premium

Waiting for the DEodexed UCLI3 mohan man ... Please release it !!

Deodexed please mohan

mahanddeem said:
Deodexed please mohan
Click to expand...
Click to collapse
Deodex it yourself man
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2

Anyone have the stock recovery for UCLI3? Mohan posted comming soon, its been a while he may have forgotten.

[Q] Need help reverting back to cleanrom 2.1 from 4.5

I did a titanium backup before flashing Cleanrom 4.5 to include rpm and radio. I was very happy with cleanrom 2.1 and need to revert back due to poor battery life, very poor. Can someone help with the steps to revert including tibu help? I tried a search, but the search function is temporarily unavailable. I only see restore apps and data in tibu and not sure if that will revert me completely. I also think I need to flash the old rpm and radio, but am not sure. I waited 2 days for the system to stabilize, but no love. I also loaded crap mods and acidmusic mods, but don't think that is the battery drain problem. I am on vacation and need to fix this as I need my phone battery to last. Any help would be appreciated.

what framework was 2.1 built on?

Karl said:
what framework was 2.1 built on?
Click to expand...
Click to collapse
You mean ICS?

lol... no like VRLEC

Karl said:
lol... no like VRLEC
Click to expand...
Click to collapse
It was ICS VRALG1 4.0.4
Sent from my SCH-I535 using xda app-developers app

any modem.zips or rpm.zip you will need can be found here ( as always there is a chance of borke)
flash modem and rpm and with TB restore user apps+data only
http://goo.gl/jmLth
http://goo.gl/5kdPU

Titanium backup is only for apps and data to revert to 2.1 you will need to flash it in recovery and then flash the modern separately.
Sent from my SCH-I535 using xda app-developers app

funnyperson1 said:
Titanium backup is only for apps and data to revert to 2.1 you will need to flash it in recovery and then flash the modern separately.
Sent from my SCH-I535 using xda app-developers app
Click to expand...
Click to collapse
good advice. Any help on 2.1 clean rom location. ?

ULEWZ said:
good advice. Any help on 2.1 clean rom location. ?
Click to expand...
Click to collapse
Search for it on Scrosler's website under: VZW GSIII/Recent Archives
Sent from my SCH-I535 using xda app-developers app

SlimSnoopOS said:
Search for it on Scrosler's website under: VZW GSIII/Recent Archives
Sent from my SCH-I535 using xda app-developers app
Click to expand...
Click to collapse
Found it on my sd card. As soon as the phone charges I will give it a go. Thanks for the quick responses.

Also don't forget, you will need to do a "Wipe/Factory Reset" before you flash CR2.1

funnyperson1 said:
Also don't forget, you will need to do a "Wipe/Factory Reset" before you flash CR2.1
Click to expand...
Click to collapse
Thanks. I wiped everything. Reverted back and battery life instantly improved. Will wait for a clean rom kernel before I upgrade again.

[Q] How to install custom recovery after root?

first things first. I'm a noob. HAHA. but i'm willing to learn.
I recently rooted my phone by using chainfire's CF-AUTO-ROOT and it has stock recovery on it. Now, I want to install a custom recovery, specifically cwm recovery. How will be able to do this? Do I have to unroot then root again? a step by step info will be appreciated. thanks

First of all find a cwm file for ur device specific to the model u have on google. Flash it with Odin n u will have the recovery.
Sent from my GT-P3100 using xda app-developers app

Use the search function, read, profit.
Sent high from my SGH-M919

reply
vehvariya said:
First of all find a cwm file for ur device specific to the model u have on google. Flash it with Odin n u will have the recovery.
Sent from my GT-P3100 using xda app-developers app
Click to expand...
Click to collapse
done finding cwm file that's compatible with my tab
Flashing? not really that well with android terms yet. after clicking "pda" then selecting the cwm file, should I click start? is that what you meant by flashing?
I appreciate your help.

Yeah first go to download mode holding power and volume down button and select the file in the PDA section n just click on start. And wait till pass. appears on the Odin screen. That's it.
Sent from my GT-P3100 using xda app-developers app

Or could just download rom manager and do it from there. Mush easier for a noob
Sent from my GT-P3113 using xda app-developers app

reply
vehvariya said:
Yeah first go to download mode holding power and volume down button and select the file in the PDA section n just click on start. And wait till pass. appears on the Odin screen. That's it.
Sent from my GT-P3100 using xda app-developers app
Click to expand...
Click to collapse
Got that! followed exactly what you said and poof - custom recovery. may i ask if you installed a custom rom in your tab 2? and if so, what rom is it?

reply
mymeatb18 said:
Or could just download rom manager and do it from there. Mush easier for a noob
Sent from my GT-P3113 using xda app-developers app
Click to expand...
Click to collapse
just saw it... at least i know that i can do that and at the same time i want to be famillaw with odin any suggestion on custom roms?

My using the cm 10.2 recent build. Works very well.
Sent from my GT-P3100 using xda app-developers app

rom?
vehvariya said:
My using the cm 10.2 recent build. Works very well.
Sent from my GT-P3100 using xda app-developers app
Click to expand...
Click to collapse
I also would like to install cm 10.2. is it stable? I tried searching and I found pac rom and if i'm not mistaken 3 custom roms are installed into 1 rom.
I also would like to ask if it is really necessary to wipe all data before installing a new rom? and if so, would apps like titanium backup pro would be able to backup every single app or information that is in my tab/

Yeah u have to wipe cache and dalvik cache. 10.2 nighties r stable. No issues with me.
Sent from my GT-P3100 using xda app-developers app

i use cm10.1.3rc2, it's good!
just release at 2013-9-5

cm10.1
impliu said:
i use cm10.1.3rc2, it's good!
just release at 2013-9-5
Click to expand...
Click to collapse
I would like to give that a try. do you have any links on where I can find instructions on how to install that? also links on the files that are needed. thanks.

cm10.2
vehvariya said:
Yeah u have to wipe cache and dalvik cache. 10.2 nighties r stable. No issues with me.
Sent from my GT-P3100 using xda app-developers app
Click to expand...
Click to collapse
can you post a link on how to install cm10.2 along with the files that are needed to be downloaded. thanks.

Hey there.. Here is the procedure to install cm 10.2
First get into the recovery mode and follow the steps.
1. First do a factory reset.
2. Go to advanced menu not clear dalvik cache.
3. Wipe cache partition.
4. Get the latest nightly for ur device from here http://get.cm and flash it.
5. Download the Google apps for 4.3 from here http://goo.im/devs/BaNkS/GApps 4.3 (choose the first link) and flash it.
6. Reboot device.
U will have cm 10.2.
Sent from my GT-P3100 using xda app-developers app

superSUnoob said:
just saw it... at least i know that i can do that and at the same time i want to be famillaw with odin any suggestion on custom roms?
Click to expand...
Click to collapse
Your thread is changing direction but I can't resist commenting anyway. If your tablet is rooted, stock I don't think you will see big benefits to a custom ROM. For other tablets I use like the Kindle, Nook and N7 custom roms can make a huge difference. I'm running CM 10.? Or variants of that on those devices. My most used tablet is this 2.7 with stock ROM. If you must try another ROM, I'd suggest a sick based ROM that is deodexed with sound or visual enhancements. Also, changing to a noon, Touchwiz launcher will make big differences. GOOD LUCK!
P.S. quess what a ROMaholic might be.

ROMaholic
king200 said:
Your thread is changing direction but I can't resist commenting anyway. If your tablet is rooted, stock I don't think you will see big benefits to a custom ROM. For other tablets I use like the Kindle, Nook and N7 custom roms can make a huge difference. I'm running CM 10.? Or variants of that on those devices. My most used tablet is this 2.7 with stock ROM. If you must try another ROM, I'd suggest a sick based ROM that is deodexed with sound or visual enhancements. Also, changing to a noon, Touchwiz launcher will make big differences. GOOD LUCK!
P.S. quess what a ROMaholic might be.
Click to expand...
Click to collapse
just noticed that my thread is changing direction
I would like to give that "sicked based ROM" a try. any links to those ROMs? and if im not contented, I can revert back to stock rom right? or can I try the "sicked based ROM" and stock ROM thru dual booting?

reply
vehvariya said:
Hey there.. Here is the procedure to install cm 10.2
First get into the recovery mode and follow the steps.
1. First do a factory reset.
2. Go to advanced menu not clear dalvik cache.
3. Wipe cache partition.
4. Get the latest nightly for ur device from here http://get.cm and flash it.
5. Download the Google apps for 4.3 from here http://goo.im/devs/BaNkS/GApps 4.3 (choose the first link) and flash it.
6. Reboot device.
U will have cm 10.2.
Sent from my GT-P3100 using xda app-developers app
Click to expand...
Click to collapse
thanks for this info. I will try this before I try the "sicked based ROM" (evil laugh) :laugh: