Here's the scenario.
I flashed AOKPb40 when I wasn't home. My phone was stuck on the Samsung boot screen. I tried 3 finger recov... no good. Still stuck on boot screen. Removed battery, waited a few minutes, 3 finger... still stuck on boot screen. I figured I'd wait till I get home and Odin back to stock. By time I got home my battery was dead. It wouldn't charge. It was on the charger for 2 hours and no go. I plugged the USB into PC and entered download mode. I figured what the hell... lets give it a shot. Launched Odin, started JScotts UCLB-Root-Modded Odin Package. Everything was running then... boom. Phone shut down right in the middle of FACTORYRFS. Pulled battery and tried the whole thing again... guess what... same thing. So I put my phone back on the charger and my screen showed a phone icon with a triangle with an exlcamation point and a PC icon. I thought "Oh Crap".
So here is how I fixed it.
I downloaded qkster's Heimdall One-Click package. I read up on how to use Heimdall and I was taken to a download page to download Heimdall suite. After many failed attempts to load the Heimdall package in Heimdall Front End, I kept getting a file size error. I googled the error and found qkster's re: to a guy with the same problem. Turns out the One-Click package is self executable, no need for the Heimdall front end suite. So I launched qkster's Heimdall package and it actually completed the flash! However, when the phone rebooted I was shown a partial CWM recov menu. I hit reboot and it kept taking me to the same CWM menu.
Now that I can get past the screen with the phone-caution-pc thing I tried using Odin with JScott's UCLB package. Odin finally worked all the way through, but with the same result as Heimdall, CWM Recov loop. I figured I was missing boot loaders. Flashed through Odin and still no good.
I now went all the way back to stock using GTG's Ultimate Unbrick. Voila! My phone is back! Holy toledo, 4 hours of trouble shooting and I finally have a working phone again.
Summary, Odin doesn't complete and you're stuck, here's what to do.
Use qksters Heimdall
http://forum.xda-developers.com/showthread.php?t=1629079
If stuck in Recov loop. Use GTG's Ultimate Unbrick
http://forum.xda-developers.com/showthread.php?t=1116251
I hope my long painful recovery story will help someone out.
Sounds like you just needed an unbrick solution with a pit file for repartition. You could have used just the UCLB3 Unbrick with the pit file, and you would have been set.
http://forum.xda-developers.com/showthread.php?t=1705260
Still, glad you worked it out. This is why it's a good thing that we have many options that work via Heimdall and Odin. When one isn't doing it on your phone, just try another. We just have to be careful not to call our way of fixing it the only right way or the best way. Several ways exist, so we truly have an unbrickable device. Well, unbrickable as long as you don't bork a bootloader flash.
Edit: By the way, that phone-caution-pc thing is still download mode.
Sent from my SGH-I997 using Tapatalk 2
Well said jscott, and glad you got it working. I would also add, that it would appear from the initial symptoms, that maybe you just lost recovery. Several roms, including uniporn have packages that can fix that. In the uniporn thread it is in post 3.
Also, I think there is a good lesson here too for others and that would be that it would be extremely wise to know your way around Odin and heimdall before embarking on that very first flash.
Again, this is just for future reference should someone read this later on. Glad to hear you are back up and running.
Sent from my SGH-I997 using Tapatalk 2
Good work.
As Yuma have stated, when you lost recovery, flashing this kernel would have brought you back to working cwm to flash the rom also:
http://forum.xda-developers.com/showpost.php?p=25526654&postcount=3
And when you have completed the uclb3, you could have finished it with the boot loader flash and then do a factory reset. After that, flash which every insecure kernel to get back recovery to flash what ever you wanted.
As long as you can get back into download mode, you can use any of the restore process.
Thanks all for the follow up. The biggest problem was the dead battery. After I finally got this sicker up and running with the phone plugged in my battery was at 8%. The damn thing kept crashing while in download mode. But yes, this is not the only way. I had to use qksters heimdall to at least get the phone to boot. Once I got to boot into the recovery boot loop issue I used gtg unbrick.
If it wasn't for all the posts and threads from you guys I would've been screwed. Oh, and to top it all off, xda was down when I first started down the road. Long freaking day!
Sent from my SGH-I997 using xda premium
I've been in that situation. Easiest solution is to just get a fully charged battery
Sent from my SGH-I997
jscott30 said:
Sounds like you just needed an unbrick solution with a pit file for repartition. You could have used just the UCLB3 Unbrick with the pit file, and you would have been set.
http://forum.xda-developers.com/showthread.php?t=1705260
Still, glad you worked it out. This is why it's a good thing that we have many options that work via Heimdall and Odin. When one isn't doing it on your phone, just try another. We just have to be careful not to call our way of fixing it the only right way or the best way. Several ways exist, so we truly have an unbrickable device. Well, unbrickable as long as you don't bork a bootloader flash.
Edit: By the way, that phone-caution-pc thing is still download mode.
Sent from my SGH-I997 using Tapatalk 2
Click to expand...
Click to collapse
The first problem I had was Odin was crashing during the factoryrfs stage. That's why I tried heimdall. I just needed something to get loaded so I could start flashing. I didn't think about going straight to uclb, would've saved me a step or two
Sent from my SGH-I997 using xda premium
tx240sx said:
The first problem I had was Odin was crashing during the factoryrfs stage. That's why I tried heimdall. I just needed something to get loaded so I could start flashing. I didn't think about going straight to uclb, would've saved me a step or two
Sent from my SGH-I997 using xda premium
Click to expand...
Click to collapse
If you were using something like my earlier rooted UCLB3 Odin options, those don't have a pit. Those aren't intended as much as an unbrick/restore option as they are for a quick way to get to rooted UCLB3. Hanging on factoryfs.rfs suggests you needed repartitioning, and the UCLB3 Unbrick provides this, since it has a pit file. The other Odin package wasn't working because you needed a pit file to restore in your situation. That's why the GTG Unbrick ended up fully restoring your phone; it has a pit. It or the UCLB3 Unbrick should have worked to "unbrick" your phone right after the first failed Odin attempt. Also, as noted by Yuma and qkster, an option available before that first Odin flash was to restore just the kernel/recovery. That option became unavailable after the first failed Odin flash. Still, many options are available, and we're glad you found a combination that worked.
Sent from my SAMSUNG-SGH-I997 using Tapatalk 2
infuse reboot?????
is there an easier way to fix this issue? Honestly I could care less about the phone I have over 1000 pictures and videos I would like to save. is there a way to ge them off of the phones memory with it rebooting over and over?
You might be better off starting your own thread and give some details like what is phone doing, which ROM, what did you try to fix it, etc.
Sent from my SGH-I997 using xda premium
infuse rebooting
psal217050 said:
You might be better off starting your own thread and give some details like what is phone doing, which ROM, what did you try to fix it, etc.
Sent from my SGH-I997 using xda premium
Click to expand...
Click to collapse
I have done everythig possible that can be done taking the battery out, charging it from wall charger and charging it from usb port. letting it wait for 2 days before messing with it. One day it went one step further to the white screen where the at&t logo forms and then it reboots again. I have not done a master reset or whatever its called because I want my pics of videos and contacts. The phone has been in the otter box from day one so it looks brand new and its over a year old. I could care less about the phone once I get my pics and videos off of it I will not mess with it again. Is it possible to save pics videos and contacts? I am not sure what you mean when you ask which ROM.
rocafella23 said:
I have done everythig possible that can be done taking the battery out, charging it from wall charger and charging it from usb port. letting it wait for 2 days before messing with it. One day it went one step further to the white screen where the at&t logo forms and then it reboots again. I have not done a master reset or whatever its called because I want my pics of videos and contacts. The phone has been in the otter box from day one so it looks brand new and its over a year old. I could care less about the phone once I get my pics and videos off of it I will not mess with it again. Is it possible to save pics videos and contacts? I am not sure what you mean when you ask which ROM.
Click to expand...
Click to collapse
Okay, since you don't want to do your own thread. Read the information in the following link and follow it to the letter. This should put you back to stock and if everything works right, you will be able to get your info off the phone.
http://forum.xda-developers.com/showthread.php?t=1524081
If you don't know how to put the phone in download mode, take your battery out, hold down the volume +/- buttons but no power button, put the batter back in and then plug the USB (connected to a computer that has the drivers from the link installed) into the phone. Do not disconnect the phone otherwise, you may end up with a brick.
Related
Samsung Galaxy S 4g
Softbricked when I mistakenly loaded the vibrant rom. I have been reading for hours on how to fix this. After dozens of tries I found the guide for loading (with odin) T959UVKA6_REV05_home_low_CL860813.
I did have re-partition checked when I probably shouldn't have. I was trying to load s1_odin_20100512.pit as well. Odin said the process was successfully run but when I tried to reboot my phone nothing happened. I can't get it to even boot to the download screen.
I've tried every combo in the book (including remove battery, plug in USB, hold volume up/down, replace battery). I've left the battery out for as long as 10 minutes too (excessive, I know) That worked at least a dozen times before but now my screen won't even start up.
HELP! What do I do?!
tyler611 said:
Samsung Galaxy S 4g
Softbricked when I mistakenly loaded the vibrant rom. I have been reading for hours on how to fix this. After dozens of tries I found the guide for loading (with odin) T959UVKA6_REV05_home_low_CL860813.
I did have re-partition checked when I probably shouldn't have. I was trying to load s1_odin_20100512.pit as well. Odin said the process was successfully run but when I tried to reboot my phone nothing happened. I can't get it to even boot to the download screen.
I've tried every combo in the book (including remove battery, plug in USB, hold volume up/down, replace battery). I've left the battery out for as long as 10 minutes too (excessive, I know) That worked at least a dozen times before but now my screen won't even start up.
HELP! What do I do?!
Click to expand...
Click to collapse
Wow... Dude... You are offically bricked. Samsung can only help now.
Not trying to be negative, but you really shouldve read the instructions!
:-(
Sent from my SGH-T959V using XDA Premium App
I think I am in exactly the same boat as the OP. What is the best way to resolve this? Bring it into T-Mobile? Send it in to Samsung somehow? Is there a number to call for warranty repair or something?
Sometimes ODIN will still see the phone even when the screen is totally black. If ODIN can still see it, you can reflash a good ROM ~ get it going again.
Sent from my SGH-T959V using XDA App
stephen_w said:
Sometimes ODIN will still see the phone even when the screen is totally black. If ODIN can still see it, you can reflash a good ROM ~ get it going again.
Sent from my SGH-T959V using XDA App
Click to expand...
Click to collapse
I did the same thing as the OP. ODIN wouldn't recognize the phone. Ended up letting it sit overnight and then ODIN worked.
If you are flashing ROMs you should probably get a jig.
This guy is a forum member and great to deal with. (can't post the link) go to mobile tech videos dot com
Leave the battery off for a few minutes. Try Odin 1.85 to see if it recognizes the phone
Sent from my T959 using xda premium
Please use the Q&A Forum for questions Thanks
Moving to Q&A
Please help me. My Infuse 4G doesn't boot. All I see was light on the button. This what happened. I want to go back to stock and use [ODIN][UCKE3] Return to stock (Updated 06/08/11) by gtg465x . I right click on Odin and run as Admin. Odin see my phone on a download mode. I select infuse.pit on PIT, PDA in Pda, and Phone in Phone. then click Start. It got stuck at factory.fs (don't remember the name actual name). It stuck there for so long, maybe like an hour. Then I decide to unplug and pull battery out. close the Odin and redo the step again. This time the status bar went half way and then got stuck again. I left it overnight just to see if it's actually finish and it never did. Just stuck there. Turn the phone on and i only see light on the button. Is my phone dead? I can still able to get to download mode but the phone won't boot.
I done return to stock so many times and was successful. This was the first encounter I had where Odin stuck and never complete it flashing.
Try things like reinstalling the drivers, another pc, another usb cable etc.
Thanks. Will try that and also i will try this [ODIN][UCKD5] Odin - Stock (100% or Root+3e) - (Update 06/05/11) since on FAQ #4 seem to be in my case. But if members had other recommendation, please post. thx in advance
cat2115 said:
Thanks. Will try that and also i will try this [ODIN][UCKD5] Odin - Stock (100% or Root+3e) - (Update 06/05/11) since on FAQ #4 seem to be in my case. But if members had other recommendation, please post. thx in advance
Click to expand...
Click to collapse
Getting stuck on the factory.fs is pretty common here. You might try charging for a bit to see if you can get it to show signs of life. And that link up there^^^(UCKD5 Stock+Root+3e) has worked for me when gtg's didn't. Read the instructions for it carefully as you don't have to check as many boxes. You only need to load the file into the PDA slot. Also if you didn't have the drivers installed your phone wouldn't show up, so that's not your problem (although you could try re-installing them for **** and giggles)...
If THAT doesn't work try Adam's Heimdall one click HERE
If all else fails try a different PC. I had to and it worked like a charm.
Good Luck
Just my 2¢
Sent from my SAMSUNG-SGH-I997 using XDA App
I had a similar problem last week I tried on my dads computer, nothing, then went to my computer since my computer had the drivers already on it cuz I used it to put music on my sd card it read it fine and they process went smoothly, so try on a computer that had had it
plugged it in before the problem and if it doesn't find threw phone restart they computer and re put the phone in download mode and try again and keep doing that till it recognizes the phone and it should work then
Sent from my SAMSUNG-SGH-I997 using xda premium
Some times just trying a different USB port on the same computer will help to. Not sure why but on my laptop the USB port on the right my Captivate did not like for flashing but the one on the left side always worked right.
Thank you all for helping me out. My infuse is now back in business. I use [ODIN][UCKD5] Odin - Stock (100% or Root+3e) - (Update 06/05/11) but this one got my phone to always boot in recovery mode no matter what i did. So i decide to try Heimdall One-Click Back-To-Stock UCKJ4 + Easy CWM install [2.3.6] (FOR AT&T USERS) and then flash LinuxBozo's Defuse 1.5 kernel. Successfully flash it . However after using Heimdall One-Click, ODIN did not see my phone when it's in download mode. Besides that, everything went well.
cat2115 said:
Please help me. My Infuse 4G doesn't boot. All I see was light on the button. This what happened. I want to go back to stock and use [ODIN][UCKE3] Return to stock (Updated 06/08/11) by gtg465x . I right click on Odin and run as Admin. Odin see my phone on a download mode. I select infuse.pit on PIT, PDA in Pda, and Phone in Phone. then click Start. It got stuck at factory.fs (don't remember the name actual name). It stuck there for so long, maybe like an hour. Then I decide to unplug and pull battery out. close the Odin and redo the step again. This time the status bar went half way and then got stuck again. I left it overnight just to see if it's actually finish and it never did. Just stuck there. Turn the phone on and i only see light on the button. Is my phone dead? I can still able to get to download mode but the phone won't boot.
I done return to stock so many times and was successful. This was the first encounter I had where Odin stuck and never complete it flashing.
Click to expand...
Click to collapse
I was stuck in Samsung logo. And cannot get into the Download mode. Could you help me with that? Or anyone?
pkayrat said:
I was stuck in Samsung logo. And cannot get into the Download mode. Could you help me with that? Or anyone?
Click to expand...
Click to collapse
What have you tried so far to get in to Download mode?
Sent from my SAMSUNG-SGH-I997 using XDA App
My infuse was running aokpcb rom. i made a backup of my previous rom, AEON v1.3.1. i restored using nandroid back to AEON but when i reboot its stuck at the samsung screen. I tried GTGs Odin back to stock multiple times using different ports but it always gets stuck at factoryfs. i even rebooted the computer and tried it again but still no good. I've used Odin back to stock a couple times before so im used to the program. now ive ran out of ideas and i would greatly appreciate the help. THANKS
Try heimdall...
http://forum.xda-developers.com/showthread.php?t=1524081
If that doesn't work 'I' don't know what to tell you
Sent from my SAMSUNG-SGH-I997 using XDA
And don't restore with nandroid, just to a full restore back to stock with odin or hemdall and reflash the rom.
Im not 100% but i think with aeon the first boot will freeze up at the factory screen. Try pulling battery then reboot..
Sent from my SAMSUNG-SGH-I997 using XDA
isaiahe97 said:
Try heimdall...
http://forum.xda-developers.com/showthread.php?t=1524081
If that doesn't work 'I' don't know what to tell you
Sent from my SAMSUNG-SGH-I997 using XDA
Click to expand...
Click to collapse
+1 odin sux. it's funny how some independant guys can reverse engineer what it's doing and write something better.
Happens to my Infuse all the time now, even using Heimdall. I just pull the battery, get back into the alternate download screen, reload the drivers (if necessary) on the pc and re-run Heimdall. It always seems to get stuck twice, but works the third time. The last time I took it to stock & did a "factory data reset", just to see if that would clear up whatever the issue was. Unfortunately (?), I haven't tried going back to stock since.
Dani897 said:
+1 odin sux. it's funny how some independant guys can reverse engineer what it's doing and write something better.
Click to expand...
Click to collapse
Not sure if your being understood.
Sorry for not responding. I've been at a summer camp for the past week. Anyways, when i try to install drivers with heimdall it aborts the procedure and then freezes the program... and when i plug in my phone into the wall charger, the screen stays off..
Young_Khalifa said:
Sorry for not responding. I've been at a summer camp for the past week. Anyways, when i try to install drivers with heimdall it aborts the procedure and then freezes the program... and when i plug in my phone into the wall charger, the screen stays off..
Click to expand...
Click to collapse
Heimdall is great when properly set up and WHEN IT WORKS. What I do, and this'll bring it back from pretty much anything, is use gtg unbrick, and if it doesn't boot from that flash, (and mine doesn't because its a rogers ) , i then flash the Odin stock lb3 pack, and boom back to normal no matter what I flashed. I imagine if you're running an at&t model , you shouldn't have to do the second step. Be sure to remove the battery and reinsert at least once on any from flash to be sure its not booting correctly before going to another step. Also be sure drivers are correctly installed through kies or kies mini. I find this is easiest with Odin because it clearly shows you in bright yellow that the download connection has been established.. many times i' very had to reinstall the kies drivers, I don't know why.. but try this , and like I say once you see yellow in Odin in phone download mode, you know you're set. Once again, like this kies/gtg/try booting/if no boot/pull battery try boot again/ if still no boot Odin lb3 stock and then flash a recovery kernel to regain cwm..
Sent from my SGH-I997 using XDA Premium HD app
ive been trying the odin lb3 from gtg and it gets stuck on dbdata.rfs instead.. im kinda flipping out...
Good Morning Everyone, This is my first post. I try to never post just read. I have read and read but to no avail. I have a AT&T Samsung infuse 4g. it WAS running froyo. What I mean by WAS, is that I was trying to install the modded 3e recovery so I could install clockworkmod recovery. During this process I read that I need to mount the /system partition as read/write I did this using the tool box that was created by some of your developers. It is awsome by the way. Well I did that and put a new recovery file in the /bin but it did not work as the website claimed so I thought well I should delete the old one. Bad Idea when I did the reboot it stopped me at the samsung screen. I tried to hard reboot it pulled the battery talked to it with a really kind voice and nothing happend. So I decided to use GEG's Ultimate Unbrick because this has worked for me in the past when i have messed up. So I put my phone into download mode and started the process with Odin. And here is where it gets bad.... one of my children was talking with me during the process and he decided to unplug my phone.. AHH EFFFFFF! I thought. Well when I tried to fix it it was to late. My phone will no longer turn on or even pretend to start. I am broke and cannot afford a new phone plus my wife would kill me seeing we have 6 children and it is right before christmas if I came home with a new galaxy note 2 Please Please can any one help a desperate dad with a busted Samsung Infuse. Thank you all for this awesome website that has taught me alot.. Please dont kill me for posting something someone has already posted because I could not find anything that was helpful for this situation with my phone.
Xda is awesome!
Well I didnt read good enough I guess because while I was waiting not so patiently for a reply I found this http://forum.xda-developers.com/showthread.php?t=1194294 which got me back to download mode yes!!!! Thank you thank you thank youXDA love you guys! Merry Christmas! PS I still want the Galaxy Note 2 so if you have a extra one please PM me and I will give you my address LOL!
MerkTheMedia said:
Well I didnt read good enough I guess because while I was waiting not so patiently for a reply I found this http://forum.xda-developers.com/showthread.php?t=1194294 which got me back to download mode yes!!!! Thank you thank you thank youXDA love you guys! Merry Christmas! PS I still want the Galaxy Note 2 so if you have a extra one please PM me and I will give you my address LOL!
Click to expand...
Click to collapse
Awesome! Glad you got your phone functioning again. Being persistent in searching and reading and trying to find answers usually results in good outcomes. :thumbup:
Sent from a de-Funkt Infuse
Okay now I have really done it this time. So I worked a 18 hour day and thought well instead of getting some rest i will install Gingerbread on my infuse. To make a long story short while I was using odin to install it paused for a long time at the format stage, so I thought well I will just turn it off even though it says not to and then.....well it did a rainbow colored screen I tried to figure it out last night with no luck. So I have been working on it all morning the rainbow screen is gone but now it just goes from black to all white screen. I have tried every possible way to get into download mode with no luck. Am I screwed or what? Does anyone have any suggestions. If I am out of luck does anyone know if bestbuy's warrenty covers rooted phones that are [email protected] bricked?
You just need To update your boot loader.
You can navigate in the screwy screens but it takes patience and some guesswork. Been there
Also...
Good instructions here
http://forum.xda-developers.com/showthread.php?p=14550608
USB cables have given me issues as well as drivers. Install Kies to get the drivers.
Another...
http://forum.xda-developers.com/showthread.php?p=23118134
Sent from my SGH-I997 using xda app-developers app
Sent from my SGH-I997 using xda app-developers app
saxk said:
You just need To update your boot loader.
You can navigate in the screwy screens but it takes patience and some guesswork. Been there
Also...
Good instructions here
http://forum.xda-developers.com/showthread.php?p=14550608
USB cables have given me issues as well as drivers. Install Kies to get the drivers.
Another...
http://forum.xda-developers.com/showthread.php?p=23118134
Sent from my SGH-I997 using xda app-developers app
Sent from my SGH-I997 using xda app-developers app
Click to expand...
Click to collapse
It still will not get me into download mode it is powering on and off connecting and disconnecting I have the drivers installed I have tried gtg's guide I have tried qstars one click nothing is working. These have worked for me in the past but that was because I can get into down load mode. Unfortunately not any more Is there a way to make the phone stay on and connected so it stops going black to white to black screen? I am so bummed out! I have been reading for so many hours my brain hurts. I have learn a ton but I can't do anything with my new knowledge with no phone!!!AAAHHHHHH
MerkTheMedia said:
It still will not get me into download mode it is powering on and off connecting and disconnecting I have the drivers installed I have tried gtg's guide I have tried qstars one click nothing is working. These have worked for me in the past but that was because I can get into down load mode. Unfortunately not any more Is there a way to make the phone stay on and connected so it stops going black to white to black screen? I am so bummed out! I have been reading for so many hours my brain hurts. I have learn a ton but I can't do anything with my new knowledge with no phone!!!AAAHHHHHH
Click to expand...
Click to collapse
if you're boot looping in the samsung logo, it could be your power button. search for how to fix power button
qkster said:
if you're boot looping in the samsung logo, it could be your power button. search for how to fix power button
Click to expand...
Click to collapse
Qkster its a honor to have you comment on my thread, Unfortunately Im not boot looping to the samsung logo it is just a black then white then black back and forth taunting me with every blink. I did read the thread about the power button earlier though and that is unfortunately not the fix either. I do appreciate the input you guys really do try and help! Maybe you can answer a question for me is there a way to get to the phone through command prompt? I really need this phone fixed. My wife has been telling me I shouldnt be messing around with it because im gonna break it. I really dont want to tell her she was right. I will never hear the end of it lol!
MerkTheMedia said:
Qkster its a honor to have you comment on my thread, Unfortunately Im not boot looping to the samsung logo it is just a black then white then black back and forth taunting me with every blink. I did read the thread about the power button earlier though and that is unfortunately not the fix either. I do appreciate the input you guys really do try and help! Maybe you can answer a question for me is there a way to get to the phone through command prompt? I really need this phone fixed. My wife has been telling me I shouldnt be messing around with it because im gonna break it. I really dont want to tell her she was right. I will never hear the end of it lol!
Click to expand...
Click to collapse
You're too kind, Merk.
I'm not sure what happened to your phone. The Infuse is pretty sturdy. Flashing should not cause much of an issue. The faulty power button and corrosion of the circuit board were the most I've seen reported.
This is what I use to force the phone into download mode:
http://www.ebay.com/itm/Micro-USB-J...665854?pt=PDA_Accessories&hash=item3f201c4f3e
Once in DL mode, it's a matter of choosing Odin or Heimdall to bring it back to stock.
One other thought, try a different battery as well.
I had the same exact problem. If the only thing the phone will do is go into download mode, then Samsung will fix it (if your still under warranty). They fixed mine and sent it back to me. Then I tried to flash another ROM on there and while it was flashing, I went to the store, and when I came back it said failed. Then it would only go into the other download mode. The one that has this (phone...!...PC). It wouldnt show up on odin 1.7 anymore. So I ended up trying a USB cable for my HTC evo v, and the drivers installed, then it popped up on Odin. I used G2G's Ultimate Unbrick (dude is a f-ng genius, all credit goes to him) and instead of putting the pit, PDA, and phone file on there and flashing, I flashed one at a time......then....I went back and flashed all at once and everything worked perfect. If your still having trouble with it, I can tell you exactly how I did it, and maybe that will work for you. Sorry to but in on this post and sorry it was so long of a reply. I just no what its like when you half brick an infuse. Mine was like that for 6 months because I couldn't get any computer to recognize it. But anyway, I hope I was helpful.
Sent from my SAMSUNG-SGH-I747 running CM10 4.1.2 JB using xda premium
michaelsinbad said:
I had the same exact problem. If the only thing the phone will do is go into download mode, then Samsung will fix it (if your still under warranty). They fixed mine and sent it back to me. Then I tried to flash another ROM on there and while it was flashing, I went to the store, and when I came back it said failed. Then it would only go into the other download mode. The one that has this (phone...!...PC). It wouldnt show up on odin 1.7 anymore. So I ended up trying a USB cable for my HTC evo v, and the drivers installed, then it popped up on Odin. I used G2G's Ultimate Unbrick (dude is a f-ng genius, all credit goes to him) and instead of putting the pit, PDA, and phone file on there and flashing, I flashed one at a time......then....I went back and flashed all at once and everything worked perfect. If your still having trouble with it, I can tell you exactly how I did it, and maybe that will work for you. Sorry to but in on this post and sorry it was so long of a reply. I just no what its like when you half brick an infuse. Mine was like that for 6 months because I couldn't get any computer to recognize it. But anyway, I hope I was helpful.
Sent from my SAMSUNG-SGH-I747 running CM10 4.1.2 JB using xda premium
Click to expand...
Click to collapse
Well im going to give it a shot I still have the old infuse I tried to make my own jig which didnt work for me so I took it into bestbuy and they gave me a brand new phone and in all of the hustle and bustle of christmas shopping going on around me they did not take my bricked infuse so now I have a spare to tinker with. Thanks I will definately give it a try and report with my findings
Sent from my SAMSUNG-SGH-I997 using xda app-developers app
michaelsinbad said:
I had the same exact problem. If the only thing the phone will do is go into download mode, then Samsung will fix it (if your still under warranty). They fixed mine and sent it back to me. Then I tried to flash another ROM on there and while it was flashing, I went to the store, and when I came back it said failed. Then it would only go into the other download mode. The one that has this (phone...!...PC). It wouldnt show up on odin 1.7 anymore. So I ended up trying a USB cable for my HTC evo v, and the drivers installed, then it popped up on Odin. I used G2G's Ultimate Unbrick (dude is a f-ng genius, all credit goes to him) and instead of putting the pit, PDA, and phone file on there and flashing, I flashed one at a time......then....I went back and flashed all at once and everything worked perfect. If your still having trouble with it, I can tell you exactly how I did it, and maybe that will work for you. Sorry to but in on this post and sorry it was so long of a reply. I just no what its like when you half brick an infuse. Mine was like that for 6 months because I couldn't get any computer to recognize it. But anyway, I hope I was helpful.
Sent from my SAMSUNG-SGH-I747 running CM10 4.1.2 JB using xda premium
Click to expand...
Click to collapse
okay I tried but that didnt work either. Can you go ahead and explain "exactly" what you did maybe it will work!
Thanks again for everyones help!
Ok first I downloaded the unbrick package from this website. I downloaded the drivers for the infuse (not sure exactly where I got them from). I would just Google them. Then I tried every USB port on the laptop. Then switched cables and it finally worked. Opened Odin 1.7 and clicked pit, then flashed. Then I unplugged it, took the battery out and put back in and tried to boot. Didn't work. Then flashed PDA. Did same steps as before and still didn't work. Then flashed phone file. Tried to boot and still didn't work. Then I flashed all 3 files at once. Also, not sure if you know or not but the only thing that should be checked in Odin is f: reset time. Then the phone booted up and it stayed on at&t screen for about 5 minutes then finally came on. Also, you could also try to flash this other PDA file on there. I have the link saved on my computer but I'm not at home right now so I'll have to post that later. In easier steps
1. Put phone in Download mode and plug into pc.
2. Run Odin as admin and only thing checked is f reset time.
3.Flash pit then try to boot
4. Flash PDA then try to boot
5. Flash phone then try to boot
6. Flash all three at once
7. After flash While in download mode, unplug USB cable, take battery out and put back in
8. Reboot phone.
Sorry everything is all jumbled, I just got back to my home state from a road trip and I'm running on about 6 hours of sleep in 3 days. I hope this works for you. Also, there is a video on YouTube of a unbrick service for the phone. Its $30. I personally would not try it but its just an idea if you would want to.
Sent from my SAMSUNG-SGH-I747 using xda premium
I had the issue where I had the phone, the exclamation mark, and the computer symbol (The Black Screen of Death: Imaged Attached), that is all it would show when I turned it on. I thought the phone was completely bricked until I did the following, which put it into a hidden download mode and allowed ODIN to recognize it. I DID NOT NEED TO BUY A USB JIG.
1. Make sure you have Odin already downloaded and ready to go.
2. Remove the SIM and SD Cards
3. Load up Odin and make sure it is up and running on the computer. DO NOT plug your phone into the computer yet.
4. Reinstall the Battery and plug the phone to the USB cable to the computer.
5. Hold down both Volume keys and then push and hold the power button
6. Keep holding the buttons until it goes to black, KEEP HOLDING A SECOND TIME until it goes to black and the icon comes back on.
7. Now when it goes Black the second time release the Power button only.
8. You should now be in Download mode. The key is holding the buttons, letting it go to black once, and then letting it go to black again, and then release only the power button while your fingers are still on the volume buttons.
9. Now Odin should recognize the phone on a Com port (turn yellow).
10. You are now ready to return it back to stock.
I hope this helps!
did you ever get your infuse fixed man?
Sent from my SAMSUNG-SGH-I747 running CM10 JB 4.1.2 using xda premium
Yes I tried to make my own jig but my fat shaky hands could get the end of the wires to hit the correct contacts so I ordered one online and that got me into download mode! Now I'm running jelly bean! Thanks to everyone that helped out I love you guys!!!! PS. Don't skip backing up your efs folder!! Unless you want a headache. But with all my problems it has taught me a lot. My number one tip is to read read read there is always an answer! Thanks again everyone! Always hit the thanks button its the least we can do for all of these brilliant hard working developers.
Sent from my SGH-I997 using xda app-developers app
Alright, first off, PLEASE DON'T MURDER ME. I've been researching for hours and can't come up with a fix. My buddy was doing something stupid to his Droid Charge and soft bricked it. I'm a webOS guy, so I don't know much about rooting on android, and I don't belong here, but I'm usually pretty good at fixing stuff. Not this. I don't know what he did.
With the battery in, you can't do anything. With it out and plugged in to the pc, you can push vol down to get to downloading mode. I tried some java program OneClick, didn't work. I tried Odin, that was confusing as heck. Under PDA I got the charge's tar, but it wouldn't go past initializing.
Anyone willing to step by step troubleshoot with me? He's paying me to fix it, I can split it via paypal? (Am I allowed to say that?) Just feel bad, he's going on vacation tomorrow. Fail.
OK first download this: http://www.imnuts.org/downloads/cha...L_ONE-LTE-CP_REV03_user_CL706183_ship.tar.md5
Open ODIN, plug in phone with download mode. Once phone is in download mode, put in the battery. Click PDA and put that .md5 file in. Make sure that bootloader, phone, and csc are unchecked.
Check Auto Reboot and F. Reset Time. Everything else (besides PDA) should be unchecked. Hit start, and it should finish in like 5 minutes and boot up by itself. There will be two OTA updates he will have to get.
Also make sure to put the battery back in before flashing.
Sent from my SCH-I510 using Xparent Red Tapatalk 2
http://www.imnuts.org/downloads/charge/odin/charge.pit. He may also need this pit file that goes in the pit section of Odin. Good luck.
Sent from my Galaxy Nexus using xda premium
Please help, this pit may have hard bricked my phone
sasquatch080 said:
http://www.imnuts.org/downloads/charge/odin/charge.pit. He may also need this pit file that goes in the pit section of Odin. Good luck.
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
I also am having issues with my droid charge being (was) soft bricked. Now it might be hard bricked. I installed the pit and is was successful, at least odin told me it was. However now my phone will not do anything. I cannot get the screen to so much as flash a glimmer of light. Hold up and plug into computer....nothing. Just try to power on...nothing. Try to go into cwm, nothing.
I am not sure what I did to start all my problems as I have flahsed ROMs with ODIN multiple times with no issue. Yesterday though it just did not take for some reason and not only that nothing would take. After failing to flash multiple ROMs that I have used many times before, I tried the "Packaged Rom that includes custom Kernel,ROM,CWM" mentioned here. http://forum.xda-developers.com/showthread.php?t=1160580 This worked, sort of.
This would get me into CWM but would be stuck on a boot loop back to CWM no matter what i tried. Custom .zip roms, stock .zip roms, etc.
SO thats when I tried the pit mentioned in this thread......now the phone is 100% unresponsive.
Can anyone please tell me if this can be recovered? And also can anyone tell me what I may have done wrong?