Related
hi i am attaching 2 files just try to replace it in the 1 pack firmware file and flash hope that 5801 boots up with 5801 loader rejoice.
warning hazardous content risk on your own ;-)
is there a tutorial to flash using these files or a software to add these files to the tar file
This is NOT an i5801 boot file.
Why did you posted this?
Szaby59 said:
This is NOT an i5801 boot file.
Why did you posted this?
Click to expand...
Click to collapse
i dont know bout u bro just worked for me y dnt u personally try it out and yes it is the 5801 file cas i got it from another 5801
do replacing this on the i5801ddjg6 from samfirmware.com make the phone detectable in kies(for firmware updation) ?
The phone will be detected eveb with the i5800 fw just uninstall the kies reinstall it then update it now connect phone in kies mode wait till the drivers are installed. Bingo it will be done.if still not done force to reinstall the drivers
Sent from my GT-I5800 using Tapatalk
but does trying to update the frimware detect the firmware on the phone?
Yes it does if u have the right fw of that place and obvious if there is any updates. u just need to update kies not fw via kies
Sent from my GT-I5800 using Tapatalk
U may try taking the micro sd card out, i could not connect my I5801 with Kies untill i removed the mem card.
After following kkrraazzyy 's instructions for rooting my Galaxy S I9003 which, according to the comments, seemed to work for a lot of people, I came across a problem.
After selecting the pit file, putting my phone into download mode, connecting the usb, and noting that the COM was recognized by Odin, I clicked start.
The process was running smoothly until it reached the Reset phase. At this point the phone screen's "Downloading" image went blank and has remained blank for a while now.
Help, Please!!
Odin is not use to root..Odin is for flashing firmware..
To flash firmware,follow the guide by Misledz here(Gingerbread only)..
http://forum.xda-developers.com/showthread.php?t=1133787
For root, use CF-root by skin1980(For xxkph & JPKP5 only)..
http://forum.xda-developers.com/showthread.php?t=1201062
For other froyo version,you can search from this forum..All guide is there~..
I followed the instructions but I'm still getting this blank screen once it reaches the reset! I don't think the phone is booting properly (or at all perhaps)...
Okay so basically here is the problem:
I wanted to root my Samsung Galaxy S I9003 (Build JPKC2). Unfortunately for me, I ended up flashing it instead of rooting it. I used Odin and everything was going smoothly (little did I know I was flashing not rooting) then when it came to the reset phase, my phone screen went from the downloading mode screen to a blank one.
Can someone please help me and tell me what to do?
Also if you need anymore information, please feel free to ask; just bear in mind that I can't access anything on the phone because it doesn't turn on.
LOL !!! u put the file in the PIT location !! lol.. just download kpe and kph and flash using this guide http://forum.xda-developers.com/showthread.php?t=1133787
and to root just flash that in odin
http://forum.xda-developers.com/showthread.php?t=1201062
[size=+2]READ THE INSTRUCTIONS CAREFULLY 2ce BEFORE ACTUALLY FLASHING IT ![/size]
okay to root, which .tar file do I download?
and will it work? I don't think the phone is booting! Will rooting it fix this problem?
shriomman said:
LOL !!! u put the file in the PIT location !! lol.. just download kpe and kph and flash using this guide http://forum.xda-developers.com/showthread.php?t=1133787
and to root just flash that in odin
http://forum.xda-developers.com/showthread.php?t=1201062
[size=+2]READ THE INSTRUCTIONS CAREFULLY 2ce BEFORE ACTUALLY FLASHING IT ![/size]
Click to expand...
Click to collapse
okay to root, which .tar file do I download?
and will it work? I don't think the phone is booting! Will rooting it fix this problem?
it is simple man..
step:
1- Flash XXKPE file, put all the file in the required box in Odin v1.83 then
1a- 3 check box are CHECK!
2- Flash XXKPH, only 1 required box needed which is PDA.
2a- 2 check box are CHECK!
root
1- Flash CF-Root kernel in Odin v1.83 under PDA.
finish
look the instruction given by member above..
okay I follow, that's great...I'm just wondering which file I should use from here:
http://forum.xda-developers.com/showthread.php?t=1201062
ahmedrady459 said:
okay I follow, that's great...I'm just wondering which file I should use from here:
http://forum.xda-developers.com/showthread.php?t=1201062
Click to expand...
Click to collapse
There are 2 method:-
1- CF-ROOT-XXKPH-05.09.2011.tar to flash using odin v1.83 under PDA
2- CF-ROOT-XXKPH-CWM_manager-05.09.2011.zip to flash using ClockWork Recovery
u can find this on 2nd post
thank you! but where is the second post?
lol same thread just u give me before..under 1st post is 2nd post
oh! sorry about that.. thanks
so if I'm using odin i just put CF-ROOT-XXKPH-05.09.2011.tar into the pda and run it?
and that should fix my whole problem, including the boot issue?
ahmedrady459 said:
oh! sorry about that.. thanks
so if I'm using odin i just put CF-ROOT-XXKPH-05.09.2011.tar into the pda and run it?
and that should fix my whole problem, including the boot issue?
Click to expand...
Click to collapse
yes i recommend u to use odin n flash that cf kernel.
about ur probs, im not very sure but u can try..if u r still facing the probs, u need to re-flash again from xxkpe
okay just one last question...which check boxes should be checked when I'm using odin and CF-ROOT-XXKPH-05.09.2011.tar into the pda?
ahmedrady459 said:
okay just one last question...which check boxes should be checked when I'm using odin and CF-ROOT-XXKPH-05.09.2011.tar into the pda?
Click to expand...
Click to collapse
Auto Reboot and F. Reset Time should CHECK!
left Re-Partition UNCHECK!
I got the same problem! When the device is supposed to reboot, the screen stays blank. It doesn't reboot! What do I do!? :S
ahmedrady459 said:
I got the same problem! When the device is supposed to reboot, the screen stays blank. It doesn't reboot! What do I do!? :S
Click to expand...
Click to collapse
maybe u should re-flash again from xxkpe then xxkph..make sure u do the right step..
this is my video http://www.youtube.com/watch?v=6l6hTuWWjLE
the video looks very helpful but do i put the xxkpe file in pit, pda, bootloader, phone, AND csc? All of them with the same xxkpe file?
yes..put all the xxkpe file in the required box.. put it all together..3 check box there should CHECK. hit start button and wait until boot into the system. then turn off your phone and go to downloading mode again
then
flash xxkph file, which is only 1 file and put it in the PDA..Re-partition should UNCHECK!
hit start button and wait until reboot into phone menu.
after that, turn off ur phone again and go to downloading mode and flash CF-Root
download the XXKPE and XXKPH here:-
http://forum.xda-developers.com/showthread.php?p=12310841#post12310841
Guys m new to i9003 and i want to root my mobile and also want to know how to flash cwm on my device through odin .. pls help me ... I am not a noob i m a dev ! but i jus need help to not to brick my new phone .. so anyone pls help me with links so that it will be more easier for me to do it ... thank u ....
Find out your firmware and download CF-Root for your firmware from this thread.
http://forum.xda-developers.com/showthread.php?t=1331253
Read all instructions on this thread http://forum.xda-developers.com/showthread.php?t=1133787
CF-Root does include CWM so you'll be able to flash any C-ROM. Again, read all instructions for the ROM/MOD/Kernel/etc that you want to flash.
Hetalk said:
Find out your firmware and download CF-Root for your firmware from this thread.
http://forum.xda-developers.com/showthread.php?t=1331253
Read all instructions on this thread http://forum.xda-developers.com/showthread.php?t=1133787
CF-Root does include CWM so you'll be able to flash any C-ROM. Again, read all instructions for the ROM/MOD/Kernel/etc that you want to flash.
Click to expand...
Click to collapse
my device is XXKPN and the download link for CF-root has broken .. .. pls help me ..man ...
i am feeling like its really a hard job for me to root it and flash cwm ...!!! its not so easy as my galaxy fit .....!
Ravi H Basawa said:
my device is XXKPN and the download link for CF-root has broken .. .. pls help me ..man ...
Click to expand...
Click to collapse
If your device is unrooted and original stock, try updating to the latest version for your region using samsung kies.
Then you might find better links for latest versions.
=======
Else you can flash XXKPQ directly and then root it using CF-root for that version.
Note on guide thread says "Note: XXKPQ can only be flashed with help from it's supporting predecessor XXKPE like the XXKPN/XXKPH/XXKPM series, So make sure you have XXKPE downloaded. User flashing version varies with this, but this is my successful 100% assured boot." So, I guess you can flash XXKPQ directly on your XXKPN.
Try this
Ravi H Basawa said:
my device is XXKPN and the download link for CF-root has broken .. .. pls help me ..man ...
Click to expand...
Click to collapse
http://androidhryaplikacie.sk/zariadenia/samsung/ako-nahrat-custom-rom-na-galaxy-scl
Hetalk said:
If your device is unrooted and original stock, try updating to the latest version for your region using samsung kies.
Then you might find better links for latest versions.
=======
Else you can flash XXKPQ directly and then root it using CF-root for that version.
Note on guide thread says "Note: XXKPQ can only be flashed with help from it's supporting predecessor XXKPE like the XXKPN/XXKPH/XXKPM series, So make sure you have XXKPE downloaded. User flashing version varies with this, but this is my successful 100% assured boot." So, I guess you can flash XXKPQ directly on your XXKPN.
Click to expand...
Click to collapse
its really messy ... can u pls provide me the procedure of flashing cwm by using odin and i m goin to use superoneclick software for rooting my device ..
Ravi H Basawa said:
its really messy ... can u pls provide me the procedure of flashing cwm by using odin and i m goin to use superoneclick software for rooting my device ..
Click to expand...
Click to collapse
If you're on gingerbread, it's highly recommended that you use cf root kennel.
Use the universal Amit.bagaria kernel for gingerbread http://forum.xda-developers.com/showthread.php?p=19442301
you can find the detailed instructions there.
In simple words, power off your phone, enter into download mode by simultaneously pressing volume down, home and power button.
Then open Odin and in pda source select bagaria.tar
And unselect repartition option, select other 2 option (restart n other one).
Connect your phone via usb
Then see if Odin detects your phone, com port will turn yellow.
If it detects, press start and voila, you're done. It will restart the phone.
For your convenience, after auto restarting, Manual restart once again.
Press thanks if helped
after passing the root (cwm ) following the correct steps of vio tutorials (odin 4.38 ; beni_cwm-5_ext4_v2, beni 1.0) after the reboot when i try to enter on recovery mode the black screen still freezing on the "samsung logo" and nothing happens ... plz help me about that guys ...(normal mode is working) .
my OS is froyo 2.2.1 .
plz some help here .
anonymooos said:
after passing the root (cwm ) following the correct steps of vio tutorials (odin 4.38 ; beni_cwm-5_ext4_v2, beni 1.0) after the reboot when i try to enter on recovery mode the black screen still freezing on the "samsung logo" and nothing happens ... plz help me about that guys ...(normal mode is working) .
my OS is froyo 2.2.1 .
plz some help here .
Click to expand...
Click to collapse
um flash any gb f/w via odin then flash cwm..cwm doesnt support froyo aka android 2.1
speed_bot said:
um flash any gb f/w via odin then flash cwm..cwm doesnt support froyo aka android 2.1
Click to expand...
Click to collapse
how can i flash it with any gb if it can't boot on recovery mode ... it stucks on samsung logo bro
:good::good::good::good:
speed_bot said:
um flash any gb f/w via odin then flash cwm..cwm doesnt support froyo aka android 2.1
Click to expand...
Click to collapse
thama89 said:
:good::good::good::good:
Click to expand...
Click to collapse
the same answer of speed bot ... i can't install any other rom if i unable to boot on recovery mode is there any other way or suggestions ??
you can boot into dowlnoad mode..
anonymooos said:
the same answer of speed bot ... i can't install any other rom if i unable to boot on recovery mode is there any other way or suggestions ??
Click to expand...
Click to collapse
Try booting in download mode then..
Reboot the phone into Download Mode by holding down both the Volume Down button and the Home key (middle key) while turning on your phone.
Then flash stock GB from samfirmware
And install recovery via odin
Read the guide on the top in general section.
Harryhades said:
Try booting in download mode then..
Reboot the phone into Download Mode by holding down both the Volume Down button and the Home key (middle key) while turning on your phone.
Then flash stock GB from samfirmware
And install recovery via odin
Read the guide on the top in general section.
Click to expand...
Click to collapse
i read the guide and it's clear anaugh ... but at first i don't understand how can i flash GB stock from samfirmware ... i'm afred to made some mistake costs me my cell phone ... sorry for disturbing and i apriciete more help brother
anonymooos said:
i read the guide and it's clear anaugh ... but at first i don't understand how can i flash GB stock from samfirmware ... i'm afred to made some mistake costs me my cell phone ... sorry for disturbing and i apriciete more help brother
Click to expand...
Click to collapse
no problems your phone is safe..just enter the download mode and flash gb firmware that should do.you can download it from samfirmware .gt s5670
anonymooos said:
i read the guide and it's clear anaugh ... but at first i don't understand how can i flash GB stock from samfirmware ... i'm afred to made some mistake costs me my cell phone ... sorry for disturbing and i apriciete more help brother
Click to expand...
Click to collapse
http://www.sammobile.com/firmwares/
get latest firmware of your country from here^
Type 5670 in search (down left one) and check the latest version of your country.
Harryhades said:
http://www.sammobile.com/firmwares/
get latest firmware of your country from here^
Type 5670 in search (down left one) and check the latest version of your country.
Click to expand...
Click to collapse
thnx a loooooot bro that works well ... i get back finaly my recovery mode but with froyo ... is there any version of jelly bean ? to install it using odin ? and how can i root it even daugh froyo is not compatible with WCM ...
Harryhades said:
http://www.sammobile.com/firmwares/
get latest firmware of your country from here^
Type 5670 in search (down left one) and check the latest version of your country.
Click to expand...
Click to collapse
thnx a loooot bro i fainaly get back my recovery ... now i just need some how to root it bcz i still using froyo ... i reod on the guid ''SuperOneClick'' but wheen i try to downloed it i got lost ... what can be done here bro .
anonymooos said:
thnx a loooooot bro that works well ... i get back finaly my recovery mode but with froyo ... is there any version of jelly bean ? to install it using odin ? and how can i root it even daugh froyo is not compatible with WCM ...
Click to expand...
Click to collapse
first flash any gb firmware..then root then install cwm via odin then you can flash any rom that you want.
Im also in same position....im unable to enter recovery mod....im not getting the manu in recovery mod.
Msg is showing"unable to normal boot"
Im not even abl to do factry reset.coz for factry reset system need to reboot...every time the phone is stuck in same position. I did odin process...and it shows green signal....but after compliting the odin process system had to reboot to enter recovery mod..i process the next but before entering the final manu, the system is stuck during reboot.
Pls help me bro........i need ur urgent support brother.
Hello All,
I want to install lollipop builds on my tab 2 7" (Gt-P3100) now i am on Jb 4.1.1 can i directly flash LP after i root and install philz. or tell me how to do i saw jb 4.2.2 update file but when i download it says site blocked. so please help me how to do in step by step
It's better if you download any 4.2.2 firmware from sammobile and flash it through Odin, because it will make sure that you have the latest bootloader, then you can root it, flash custom recovery, and then you can update to lollipop, any doubt or help? Feel free to ask me and make sure you go crazy on the thanks button ?
You can flash the latest bootloader from codeworkx dev-host folder, make sure you are in your device folder!
http://d-h.st/users/codeworkx
shsagnik said:
It's better if you download any 4.2.2 firmware from sammobile and flash it through Odin, because it will make sure that you have the latest bootloader, then you can root it, flash custom recovery, and then you can update to lollipop, any doubt or help? Feel free to ask me and make sure you go crazy on the thanks button
Click to expand...
Click to collapse
i tried download 4.2.2 firmware frm one thread but site blocked can u give me link ?
shsagnik said:
It's better if you download any 4.2.2 firmware from sammobile and flash it through Odin, because it will make sure that you have the latest bootloader, then you can root it, flash custom recovery, and then you can update to lollipop, any doubt or help? Feel free to ask me and make sure you go crazy on the thanks button
Click to expand...
Click to collapse
Hassan 4 said:
You can flash the latest bootloader from codeworkx dev-host folder, make sure you are in your device folder!
http://d-h.st/users/codeworkx
Click to expand...
Click to collapse
u want me to flash this frm that link >> http://d-h.st/Nfz and also tell me how to flash
daringsmart said:
u want me to flash this frm that link >> http://d-h.st/Nfz and also tell me how to flash
Click to expand...
Click to collapse
Flash it via any recovery like cwm, do a simple flash by wiping cache, dalvik.
shsagnik said:
Flash it via any recovery like cwm, do a simple flash by wiping cache, dalvik.
Click to expand...
Click to collapse
i downloaded 4.2 firmware frm sammobile after flash how do i root it ? and can u send me link of recovery
edit: i could not flash 4.2 firmware :\ pls someone give me a good link
daringsmart said:
i downloaded 4.2 firmware frm sammobile after flash how do i root it ? and can u send me link of recovery
edit: i could not flash 4.2 firmware :\ pls someone give me a good link
Click to expand...
Click to collapse
Try googling the file name
shsagnik said:
Flash it via any recovery like cwm, do a simple flash by wiping cache, dalvik.
Click to expand...
Click to collapse
shsagnik said:
Try googling the file name
Click to expand...
Click to collapse
yes i did but everything same buddy -_- any solution ?
Someone pls help me
daringsmart said:
Someone pls help me
Click to expand...
Click to collapse
Posting the link in 10 mins
_________________________________________________________________________________________________
Here is the link to file you need to flash :-http://www.sammobile.com/firmwares/download/17730/P3100XXDMG6_P3100OXADMG6_XEF/
I am also posting the steps:-
How to Update Galaxy Tab 2 7.0 P3100 to Official JB 4.2.2 XXDMG6 Firmware
Odin can be properly used only if your Galaxy Tab 2 7.0 drivers are being installed on your computer. If the drivers are not there, get them manually or use Samsung KIES.
Download Odin on your computer.
Unzip the file on your PC and install the same.
Also, run Odin on your computer.
Finally, go here and download the Jelly Bean 4.2.2 file.
Place the file on desktop and on the same place unzip the package.
Enter the Tab 2 in download mode.
For download mode first turn off your handset; wait a few seconds and then press on Power, Volume Down and Home buttons at the same time.
Connect your device with the computer via USB cable.
Odin will recognize your tablet and on the program you will see the “added” message displayed and the ID:COM section blue or yellow.
If not, resolve the problems by reinstalling the drivers on the computer.
From Odin click on the option named “PDA”.
Pick the update file from your computer.
The re-partition section and the f. reset time box should be unchecked.
Click on “start”.
The XXDMG6 Firmware will now be installed.
In the end on Odin the ID:COM section will be green and the “pass” message will be displayed.
Then, you will be able to unplug the USB cable; also reboot your device.
shsagnik said:
Posting the link in 10 mins
_________________________________________________________________________________________________
Here is the link to file you need to flash :-http://www.sammobile.com/firmwares/download/17730/P3100XXDMG6_P3100OXADMG6_XEF/
I am also posting the steps:-
How to Update Galaxy Tab 2 7.0 P3100 to Official JB 4.2.2 XXDMG6 Firmware
Odin can be properly used only if your Galaxy Tab 2 7.0 drivers are being installed on your computer. If the drivers are not there, get them manually or use Samsung KIES.
Download Odin on your computer.
Unzip the file on your PC and install the same.
Also, run Odin on your computer.
Finally, go here and download the Jelly Bean 4.2.2 file.
Place the file on desktop and on the same place unzip the package.
Enter the Tab 2 in download mode.
For download mode first turn off your handset; wait a few seconds and then press on Power, Volume Down and Home buttons at the same time.
Connect your device with the computer via USB cable.
Odin will recognize your tablet and on the program you will see the “added” message displayed and the ID:COM section blue or yellow.
If not, resolve the problems by reinstalling the drivers on the computer.
From Odin click on the option named “PDA”.
Pick the update file from your computer.
The re-partition section and the f. reset time box should be unchecked.
Click on “start”.
The XXDMG6 Firmware will now be installed.
In the end on Odin the ID:COM section will be green and the “pass” message will be displayed.
Then, you will be able to unplug the USB cable; also reboot your device.
Click to expand...
Click to collapse
Buddy I downloaded the same file but when I extract it show error
daringsmart said:
Buddy I downloaded the same file but when I extract it show error
Click to expand...
Click to collapse
What's the error message?
Hey author i m using p3100 i want it to safe root with all safe parameters like safe kernel n all??
So help me????
Er. Abhi said:
Hey author i m using p3100 i want it to safe root with all safe parameters like safe kernel n all??
So help me????
Click to expand...
Click to collapse
Tell me what I can do to help you?
Give me the link whr i got a custom recovery for p3100 jb 4.1.2
N bootloader also???
Updated
Sent from my GT-P3100 using XDA Free mobile app
Er. Abhi said:
Give me the link whr i got a custom recovery for p3100 jb 4.1.2
N bootloader also???
Updated
Sent from my GT-P3100 using XDA Free mobile app
Click to expand...
Click to collapse
You don't need to update bootloader if you are on 4.1.2 as it has a lollipop compatible boot loader,
You can get the custom recovery file from here, I am posting of my favorite recovery that is TWRP
Just click here :- TWRP
Of course you need a rooted tab for flashing it, you can just download it to your tab and flash it by using Rashr (it's a app available on playstore, just click on it to go to the google play page to download it) or existing recovery, that you most probably don't have.
And tell me anything else you want, but don't forget to press the thanks button
Er. Abhi said:
Give me the link whr i got a custom recovery for p3100 jb 4.1.2
N bootloader also???
Updated
Sent from my GT-P3100 using XDA Free mobile app
Click to expand...
Click to collapse
shsagnik said:
You don't need to update bootloader if you are on 4.1.2 as it has a lollipop compatible boot loader,
You can get the custom recovery file from here, I am posting of my favorite recovery that is TWRP
Just click here :- TWRP
Of course you need a rooted tab for flashing it, you can just download it to your tab and flash it by using Rashr (it's a app available on playstore, just click on it to go to the google play page to download it) or existing recovery, that you most probably don't have.
And tell me anything else you want, but don't forget to press the thanks button
Click to expand...
Click to collapse
If @Er. Abhi doesn't already have custom recovery installed, he can flash TWRP with Odin or Heimdall. I can confirm the Heimdall will flash the twrp img file.
jrc2
Can u also provide me link frm whr i download firmware for p3100 4.1.2
Official???
Sent from my GT-P3100 using XDA Free mobile app
Er. Abhi said:
Can u also provide me link frm whr i download firmware for p3100 4.1.2
Official???
Sent from my GT-P3100 using XDA Free mobile app
Click to expand...
Click to collapse
Why you need firmware? Don't you have the 4.1.2 installed?