I have recently replaced a broken screen of an apache with a new one and when i turn it on the screen turns on and is white, when I look at it side on I can see the devices screen is working but it is faded, e.g the today screen is there but very faded.
I was wondering what could be the problem?
Hi,
I've broken my Nexus S. The screen is shattered and both the LCD and touch screen don't work. When I turn the phone on the bottom hardware buttons light up, there is the normal small vibration, however there is no display at all on the screen. The phone does seem to boot though.
Basically, I wanted to know whether buying and fitting a replacement screen, LCD and digitizer will fix the problem?
I have a friend who has replaced iPhone screen before and he seems to think that maybe it won't due to the screen not lighting up at all. Obviously I don't want to waste my money and buy a replacement screen for it not to actually work.
Thanks in advance!
So I have a black Galaxy S2 Epic Touch. I Decided I thought it would be cool to change it from black and make it the white one, I have a white GS2 screen with the back housing as well. I got the parts from a broken one my friend had, but the screen is def. good as I have seen it work before. For some reason when i take my black screen off and put the motherboard on the White screen and turn it on, it goes kinda bonkers!
The bottom touch buttons dont work? It simply makes its own random selections on the screen and kinda acts like a completely bad screen. But I have SEEN the screen work perfectly fine before this? When I put the mobo back in my black screen, it works perfectly fine again. Maybe its a sign to keep it black lol but my question IS...
Is there some sort of slightly different hardware in a white screen that identifies that I have a "Black motherboard" installed on it, so it just doesnt work right? Or SOMETHING to that extent? I was excited to switch them but hell...maybe the screen went bad somewhere down the line? Let me know what yall think, thanks guys!
-PT
I've peaked around eBay and I found a few different digitalizer plus LCD replacements. What's the difference between g23 and 710d? I can seem to find either of those numbers on my phone box. Also how hard is it to replace the entire screen?
I have some experience with this. Either replace the digitizer/lcd assembly or sell the phone and get a new one. It's possible to replace just one, but it will always look like **** when you're done, and it's not just a matter of ungluing the two layers.
If you are willing to buy a new assembly, is actually a lot easier than I thought it would be. Make sure you work in a clean area. Also, be sure to get the att screen. The international one does look cooler with its HTC logo, but it's not a perfect fit. What that means is a lot of light bleed on the edges and capacitive buttons not lighting up at all.
Best of luck either way!
Viper Rom, baby!
I've replaced mine 3 times so far. The first time you replace it , it WILL be a major pain more than likely. I recommend you find a GOOD video on YouTube or something and follow it closely. (Careful there are a lot of videos that are just atrocious..). Also as stated, get the full assembly for LCD+digitizer and to be safe, get the one with at&t logo. I have heard that the international one works but the fit might not be perfect. Anyway, good luck.
Sent from my One X using xda premium
Does anyone have a reliable source for the at&t screen?
Thanks.
sheik124 said:
Does anyone have a reliable source for the at&t screen?
One X AT&T logo replacement screen
etechnotics.com/touch-screen-glass-digitizer-replacement-for-htc-one-x-s720e-htc-at-t-logo.html[/url]
Click to expand...
Click to collapse
shanar585 said:
sheik124 said:
Does anyone have a reliable source for the at&t screen?
One X AT&T logo replacement screen
etechnotics.com/touch-screen-glass-digitizer-replacement-for-htc-one-x-s720e-htc-at-t-logo.html[/url]
Click to expand...
Click to collapse
Unfortunately, that's just the digitizer :/ We need the digitizer + LCD.
I can't find a reliable source of the entire assembly. Debating getting both of these and putting it together myself:
http://www.etradesupply.com/htc-one-x-digitizer-touch-panel-with-at-t-logo.html
http://www.etradesupply.com/htc-one-x-lcd-screen.html
Click to expand...
Click to collapse
htc one x lcd & diditizer
Check out this item I found on eBay: http://pages.ebay.com/link/?nav=item.view&id=170992426980
This one is AT&T and has capacitive light redirection things. The only one I bought that came with that
Also eBay has all the tape u need for LCD to frame, LCD to digitizer, and one for the digitizer to frame
May want to read this thread before buying an lcd. http://forum.xda-developers.com/showthread.php?t=2164760
Sent from my One X using Xparent Green Tapatalk 2
capacitive light
I would really like to figure out what these are called and were to get them.
these came with my LCD&digitizer from eBay. my last post above
billb23ok said:
I would really like to figure out what these are called and were to get them.
these came with my LCD&digitizer from eBay. my last post above
Click to expand...
Click to collapse
Have you installed the screen yet? I'm doubtful that it will fit in the AT&T/Telstra model.
thecoolestcow said:
Have you installed the screen yet? I'm doubtful that it will fit in the AT&T/Telstra model.
Click to expand...
Click to collapse
I havnt tried to turn it on but it says AT&T and the prefit looks nice. I will keep you up to date after I get the other parts and I put it together. The battery is dead at the moment
billb23ok said:
I havnt tried to turn it on but it says AT&T and the prefit looks nice. I will keep you up to date after I get the other parts and I put it together. The battery is dead at the moment
Click to expand...
Click to collapse
Any updates here? If you've installed it, how's the fit, do the capacitive buttons work, and is the contrast/sharpness correct?
thecoolestcow said:
Any updates here? If you've installed it, how's the fit, do the capacitive buttons work, and is the contrast/sharpness correct?
Click to expand...
Click to collapse
OK so the first phone I got wouldn't work with any screen. Problem cause it wouldn't. Turn on from the beginning. The second phone came. I plugged in LCD with green cable said at&t at top from source above and it wouldn't turn on so I plugged in another one from the source above it had a yellow cable said htc and the Sony one that ssid I had also turned on. The HTC ones seem to be slightly smaller but after I put the sticky tape I think it will all be OK. I just have to do it rite. Also, both screens from supplier above look remanufactured cause they both have black tape and the digitize seem to me to be thinner / glass not so thick. But they come with good black paint and light redirect things for soft buttons. So in short. Buying from him is unpredictable. As I got to different. Screen types. I have only bought two from him. I will post a picture after I assemble the phone today
So I got some good news for my Att version. I ordered this one:
http://www.ebay.com/itm/OEM-Full-LC...low-Green-Flex-For-HTC-One-X-XL-/360612529957
1. its not a sony, its a sharp. Its yellow on one side and full green on the other.
2. mine came with a sony screen. I killed my old screen getting it off (just lights up white). I booted my phone with the old sony screen, waited till the phone went to sleep, then swapped the screens. The sharp screen fired up just fine.
3. This was a perfect fit with the HTC logo. the ambient light sensor lined up, and it has light guides that line up. Also there was not the 2mm gap with the international versions.
4. One problem. The "holes" in the touch panel where the misaligned light guides/buttons are still there. So you will see the leds on the botton assembly when they light up. I recommend painting the blank spots over with a few layers of black paint.
I think what is happening is the international version has the buttons directly over top the led bar and does not use light guides.
Hi all, phone had a nasty tumble and front screen is cracked, but still works fine. is it possible to change only just the front glass and not the whole screen? saw a few to buy on aliexpress http://www.aliexpress.com/item/For-..._8&btsid=4c706082-2885-4b18-a04d-62e15cedea46
checkout parts4repair.com
replacement??
pls confirm whether this thing fits. any indian seller selling the same??
you can try: http://vifocal.com/lcd-display-touch-digitizer-screen-replace-for-huawei-honor-6-smartphone.html
Hi guys,
I'll bring this zombie topic back to life
So have any of you changed the lcd screen themselves?
How many connectors are there on the screen assembly?
I can clearly see just one in the middle of the phone next to the battery.
When I connect the new screen and turn on the phone - the vibro squeaks as in normal boot, but the screen doesn't light up.
My first guess was that I got a faulty screen so now I'm checking the second one and it does the same...
Is there anything I'm missing?
Thanks!