Has anyone verified that an OTG cable works or not with Chainfire's stickmount on a rooted One X?
Has OTG been removed from the kernel or not?
Some users have commented it's disabled in kernel. I have not verified this but I have verified it works in fastboot. Issue is the port will not supply power, so pretty pointless imo.
Will kernel support allow the usb to provide power, or is getting sd card storage working fruitless?
gunnyman said:
Will kernel support allow the usb to provide power, or is getting sd card storage working fruitless?
Click to expand...
Click to collapse
I've read that it won't supply power, but not sure whether or not that's something we can control in software.
Sent from my HTC One X using xda app-developers app
I tried a plain OTG and it didn't work.
I haven't tried it with a Y cable yet though. I'll see when I get home.
rohan32 said:
I tried a plain OTG and it didn't work.
I haven't tried it with a Y cable yet though. I'll see when I get home.
Click to expand...
Click to collapse
Shouldn't work as we don't have kernel support.
Sent from my HTC One X using xda app-developers app
beaups said:
Shouldn't work as we don't have kernel support.
Sent from my HTC One X using xda app-developers app
Click to expand...
Click to collapse
Meh
I guess one of those expensive wireless solutions is where I'm headed.
Related
Does the Optimus 3D support USB OTG?
LG's euro site doesn't mention it.
The OMAP4430 supports it. (in fact it only has host USB ports, and USB OTG, no slave only ports)
Also it would be interesting if there was a way to solder up devices to the extra USB host interface, if it isn't already used in the phone.
If the processor does support it, that would be great, but how we will enable it? What I can tell is that the Optimus 3D doesn't support usb OTG since I tried that myself.
Sent from my LG-P920 using Tapatalk
Someboby try it??? where can i get the cable?
Regars
I tried it and it does not work It seems that in our kernel has not implemented this feature
Sorry for bad english
Sent from my LG-P920 using XDA App
i hate LG
very slowly
One thing to try is booting the phone with the proposed usb device already attached (for example flash drive) as in other devices this can allow host mode to engage during startup. I dont have the correct cable to try this.
Sent from my LG-P920 using xda premium
It's said that USB-OTG method for arc is work for other phones. Can this work on ours?
http://forum.xda-developers.com/showthread.php?t=1224676
When comes to this part, seem that we are missing these modules:
su
cd/system/lib/modules/
busybox insmod usbhid.ko
busybox insmod usbmouse.ko
busybox insmod usbkbd.ko
busybox insmod usb-storage.ko
Click to expand...
Click to collapse
Anyone know where to get "usb-storage.ko" module that compatible with our O3D?
you can enable it if some one adds it to a kernel i think the guy thats working on titan kernel is working one getting otg to our phones
cyclonmaster said:
It's said that USB-OTG method for arc is work for other phones. Can this work on ours?
http://forum.xda-developers.com/showthread.php?t=1224676
When comes to this part, seem that we are missing these modules:
Anyone know where to get "usb-storage.ko" module that compatible with our O3D?
Click to expand...
Click to collapse
Gonna take a look at it.
Sent from my LG-P920 using xda premium
Did anyone manage to make it work? It maybe works on ICS?
OK did some tests and the OTG can't be implented because the MUIC driver /driver/muic/muic_max14526.c ATM can't support it.
I cannot find updated driver in network :/
Pesach85 said:
OK did some tests and the OTG can't be implented because the MUIC driver /driver/muic/muic_max14526.c ATM can't support it.
I cannot find updated driver in network :/
Click to expand...
Click to collapse
Bad luck.
I had pinned great hopes on you breaking the USB-OTG deadlock.
Thanks for your efforts.
O3D would have been a complete phone with 3D, HDMI, USB-OTG!
schubeir
---------- Post added at 06:25 PM ---------- Previous post was at 06:23 PM ----------
ThiaiZ said:
Gonna take a look at it.
Sent from my LG-P920 using xda premium
Click to expand...
Click to collapse
Thanks a tonne, Thiaiz!
desperately need the USB-OTG Feature in addition to 3D and HDMI!
All the best and pleeeeeease crack it!
schubeir
Did you realise that thiaiz response is from MARCH 2012?
Sent from my LG-P920h using xda app-developers app
chubas said:
Did you realise that thiaiz response is from MARCH 2012?
Sent from my LG-P920h using xda app-developers app
Click to expand...
Click to collapse
Hi,
A lot has happened since then. A re-look into things, maybe new info( like ported ICS) may change things a bit.!
no harm in trying again!
schubeir
schubeir said:
Hi,
A lot has happened since then. A re-look into things, maybe new info( like ported ICS) may change things a bit.!
no harm in trying again!
schubeir
Click to expand...
Click to collapse
Exactly!
I hope somebody will figure it out soon because we reeeeally need it.
Otg is the capability to run a mouse, USB and sometimes a hard drive via a micro OTG cable ... are there any roms that has that capability pre installed.??
bloodsz33 said:
Otg is the capability to run a mouse, USB and sometimes a hard drive via a micro OTG cable ... are there any roms that has that capability pre installed.??
Click to expand...
Click to collapse
Not currently. A few devs have mentioned adding it to their kernel but its still in the works.
Sent from my Inspire 4G using xda premium
Gizmoe said:
Not currently. A few devs have mentioned adding it to their kernel but its still in the works.
Sent from my Inspire 4G using xda premium
Click to expand...
Click to collapse
I guess i shouldve asked this before i rooted my brother's inspire 4g... thanks though... if.you happen to run across such a rom just let.me know thanks.
Many of us with JB and 8013's are not able to us OTG devices on our Notes. I tested it yesterday with three different ROMS and none of them supported it. While on 4.0.4(ICS) everything was fine, not one issue. Are there any Devs that could help with this as I am not knowledgeable enough to do it. Thanks a lot!
Yes please, if one understand the working of the otg usb please help us.
Sent from my GT-I9300 using xda app-developers app
mauricewal said:
Yes please, if one understand the working of the otg usb please help us.
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
would you guys mind telling me what JB rom you are using?
thanks, Dammitcubs
DammitCubs said:
would you guys mind telling me what JB rom you are using?
thanks, Dammitcubs
Click to expand...
Click to collapse
Tried These-
http://forum.xda-developers.com/showthread.php?t=2027604- DOES NOT WORK ANYMORE
Also Tried ROMN8000 DR AKRIM ROM N8000XXBLJ9 v06 27112012 Jelly Bean NO GO HERE EITHER
I also tried a stock JB update from Germany, NO GO EITHER.
so for me anything JB related stops OTG from working.
shrek4224 said:
Tried These-
http://forum.xda-developers.com/showthread.php?t=2027604- DOES NOT WORK ANYMORE
Also Tried ROMN8000 DR AKRIM ROM N8000XXBLJ9 v06 27112012 Jelly Bean NO GO HERE EITHER
I also tried a stock JB update from Germany, NO GO EITHER.
so for me anything JB related stops OTG from working.
Click to expand...
Click to collapse
Well, I know you guys want OTG. I was just asking in general. I just wanted a stock JB Rom that is compatible with 8013. I won't be using OTG. Hmmmm stock JB update from Germany....i should try that.
i have an otg cable on the way, so I'll experiment when it arrives.
DammitCubs said:
Well, I know you guys want OTG. I was just asking in general. I just wanted a stock JB Rom that is compatible with 8013. I won't be using OTG. Hmmmm stock JB update from Germany....i should try that.
Click to expand...
Click to collapse
Try team Union ROM.
Apart from OTG problem its great.
Sent from my GT-I9300 using xda app-developers app
mauricewal said:
Try team Union ROM.
Apart from OTG problem its great.
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
What are the advantages of using a OTG instead of the micro USB? So you can attach like flash thumb drives?
DammitCubs said:
What are the advantages of using a OTG instead of the micro USB? So you can attach like flash thumb drives?
Click to expand...
Click to collapse
Otg gives you a supported usb drive.
So you can attach usb keyboard, usb mouse and a flash drive.
Sent from my GT-I9300 using xda app-developers app
mauricewal said:
Otg gives you a supported usb drive.
So you can attach usb keyboard, usb mouse and a flash drive.
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
or a game pad.
or a umts modem... which is the problem:
I did look at the dmesg output, when I was under ICS mostly because of the current consumption, but also looking for the IR port.
I see now a big difference there, using the German JB 8000 Rom with the 8010 files.
Somewhat (perhaps a Init script) does load the OTG usb kernel modules, then load a usb modem (mif related to umts) and after a while there is a termination of a certain unknown pid, probably because of the modem not responding, which is then unloaded and also does switch off that OTG usb port and unload it's k. modules. Seconds later the whole thing is repeated again and again...
Surely also a reason why it's consuming more power, and probably the reason why other OTG devices have troubles.
I would like to help, but I don't know how android works on that (kernel) level, I had some knowledge about usb on linux 5 years ago, so I don't know how it has evolved.
If someone of you, Dear Rom Backers, could lead me to some (hardcore) knowledge about the whole startup(/wake) process.
I could investigate a bit more.
Other problem I did encounter with JB, somewhere a memory leak, my RAM slowly does fill up in a way, where I can't reset it, without rebooting.
OK I have my otg cable now, and can see the problem, but not the cause.
When I get near to something that can adb in I'll have a look, if anyones' got any pastebins of dmesg and logcat in the meantime please let me know.
you kidding me otg cables stop working on jellybean ¬_¬ how on earth am i going to play gta 3 now
HUYI said:
you kidding me otg cables stop working on jellybean ¬_¬ how on earth am i going to play gta 3 now
Click to expand...
Click to collapse
this is using the 8000 rom on 8013 and 8010 devices, no idea if the issue is on 8000 devices, or whether it will be there on the 8010/13 firmware.
fards said:
this is using the 8000 rom on 8013 and 8010 devices, no idea if the issue is on 8000 devices, or whether it will be there on the 8010/13 firmware.
Click to expand...
Click to collapse
maybe it's conflict because people are flashing firmware that is not supported on their tablet, i sure hope that is the case.
HUYI said:
maybe it's conflict because people are flashing firmware that is not supported on their tablet, i sure hope that is the case.
Click to expand...
Click to collapse
Absolutely. I have an N8000 using the correct official N8000 JB firmware for the device and USB works perfectly. That's why there are different firmware versions for different devices - simple.
I have a small unpowered USB hub attached to a cheap generic USB OTG connector. I am typing this using a USB wireless keyboard and mouse and I have a Note 10.1 with 160GB of storage. 32Gb internal - 64gb using internal micro-SDXC card and 64gb with a second micro-SDXC in a micro reader attached to the hub (seen as a usb drive 1 so presumably can add more). That's 160gb seamlessly available in all programs for Video, Music, documents and whatever. Eat you heart out fruit-boys!!
pwatkins said:
Absolutely. I have an N8000 using the correct official N8000 JB firmware for the device and USB works perfectly. That's why there are different firmware versions for different devices - simple.
I have a small unpowered USB hub attached to a cheap generic USB OTG connector. I am typing this using a USB wireless keyboard and mouse and I have a Note 10.1 with 160GB of storage. 32Gb internal - 64gb using internal micro-SDXC card and 64gb with a second micro-SDXC in a micro reader attached to the hub (seen as a usb drive 1 so presumably can add more). That's 160gb seamlessly available in all programs for Video, Music, documents and whatever. Eat you heart out fruit-boys!!
Click to expand...
Click to collapse
LOL that is overkill but cool, nice one.
Otg seems to be working fine on the dbt n8010 rom
Typed this using mele f10 connected with its usb dongle, and transferred some files from a usb stick
Sent from my GT-N8010 using Tapatalk 2
For those running one of the N8000 roms on your N8010, try this:
Kernel extracted from zip posted here: http://forum.xda-developers.com/showthread.php?t=2045751
Kernel has insecure boot.
Kernel Download link: https://www.dropbox.com/s/3en4hhdv08n7rsb/N8010_JB_Kernel.zip
Thanks to alirey for uploading the original OTA update zip
Thanks to graffixnyc for uploading zip with system.img and boot.img
Thanks to dsixda kitchen for insecure boot added to kernel.
May also work on 8013 as well.
Is it fixed in 8010 wifi release.
Sent from my GT-I9300 using xda app-developers app
Hi there!
I just wanted to know, if there are any news concerning the development of a kernel for the Optimus 3D which supports USB on-the-go (OTG).
Is there anyone working on that matter?
Thank you for all your great work!
An O3D_noob
edit:
I found a kernel from Pesach85 (http://forum.xda-developers.com/showthread.php?p=35531644&highlight=otg+lightning#post35531644) for ICS.
Does this one actually support USB-OTG? Has anyone tried it?
O3D_noob said:
Hi there!
I just wanted to know, if there are any news concerning the development of a kernel for the Optimus 3D which supports USB on-the-go (OTG).
Is there anyone working on that matter?
Thank you for all your great work!
An O3D_noob
edit:
I found a kernel from Pesach85 (http://forum.xda-developers.com/showthread.php?p=35531644&highlight=otg+lightning#post35531644) for ICS.
Does this one actually support USB-OTG? Has anyone tried it?
Click to expand...
Click to collapse
At this time none of the available kernels supports usb otg.
Yet we have some great kernel developers (Pesach85 is one of them) that keep doing excelent job and might get there.
The lg nexus 4 officialy doesn't have otg,but someone made it work. And another BUT.... the only problem is that it can be used with a Y cable,with one end connected to the phone and one to the charger. Not like samsung,though its getting closer.
Sent from my LG-SU760 using xda app-developers app
kekio84 said:
The lg nexus 4 officialy doesn't have otg,but someone made it work. And another BUT.... the only problem is that it can be used with a Y cable,with one end connected to the phone and one to the charger. Not like samsung,though its getting closer.
Sent from my LG-SU760 using xda app-developers app
Click to expand...
Click to collapse
it with all lg's
defcomg said:
it with all lg's
Click to expand...
Click to collapse
So you are saying that usb otg will work on our phone with Y otg cable?
Sent from my LG-SU760 using xda app-developers app
kekio84 said:
So you are saying that usb otg will work on our phone with Y otg cable?
Sent from my LG-SU760 using xda app-developers app
Click to expand...
Click to collapse
i ment that LG's do not support OTG Dunno why
Lg doesnt support it but generally the usb controller chip has the capability. Lg just choose not to make use of it.
Sent from my GT-I9300 using XDA Premium HD app
a few stock installs of ICS have appeared on here
http://usbhost.chainfire.eu/
doesnt look good
Mozzytm said:
a few stock installs of ICS have appeared on here
http://usbhost.chainfire.eu/
doesnt look good
Click to expand...
Click to collapse
i found this http://beyondusb.wordpress.com/
That looks promising. But still,no keyboard or mouse through usb....
wawis said:
i found this http://beyondusb.wordpress.com/
Click to expand...
Click to collapse
O3d is listed as a compatible device on their site -- http://www.beyondusb.com/compatible . someone needs to test it.
Curiously, LG didn't want to use USB-OTG, and I excepted that it was intentionally disabled by the software, yet USB mass storage is also disabled (much to my dismay). I personally hate MTP, nearly useless for my purposes.
Yet, the OMAP4 CPU have multi-mode USB-OTG host port, so it may have to have it enabled by the registers. LG have rather odd habit of hiding things in the source codes.
Sent from my LG-P920 using XDA
I can't find a kernel with the feature of usb otg by a cable with external power supply for Android 4.2 sense 5
With this http://forum.xda-developers.com/showthread.php?t=2289484 the phond doesn't boot.....
Please help me!!!!!
Sent from my HTC One SV using xda app-developers app
How about Usb OTG? I have cable without external power supply and second one with external power - but on stock not working. I have now unlocked bootloader, root, twrp, s-off...how to get that OTG?
I have seen that Total commander app have some kind of module for that.
I am not sure if it works, but worth a try.
I have also read in the forum that the 4pda.ru community have already created a rom which support this feature.
szenteshunor said:
I have also read in the forum that the 4pda.ru community have already created a rom which support this feature.
Click to expand...
Click to collapse
Here's what somebody from 4pda.ru community wrote yesterday about it:
rollon76 said:
It not possible.Our device hasnt get a physical USB-OTG.
Click to expand...
Click to collapse