Database Info

[Q] Set CPU profiles

ok, I have a rooted Evo 4G running Fresh 4.0 rom, what profile settings should i use in order too make the battery last , or just some other suggestions on maintaining battery life while keeping the phone running smooth.
thanx

frankie253 said:
ok, I have a rooted Evo 4G running Fresh 4.0 rom, what profile settings should i use in order too make the battery last , or just some other suggestions on maintaining battery life while keeping the phone running smooth.
thanx
Click to expand...
Click to collapse
Create a screen off profile & set it to 245/245 max/min with smartass governor or conservative. When I was using SetCPU, I undervolted so that while my screen was on, the max was ~600. For the most part I rarely needed it any higher than that for my usage. However if you want to keep it at 998 or above, you will still benefit from a screen off profile.
I only run AOSP, so Sense may need more juice with the screen on.

plainjane said:
Create a screen off profile & set it to 245/245 max/min with smartass governor or conservative. When I was using SetCPU, I undervolted so that while my screen was on, the max was ~600. For the most part I rarely needed it any higher than that for my usage. However if you want to keep it at 998 or above, you will still benefit from a screen off profile.
I only run AOSP, so Sense may need more juice with the screen on.
Click to expand...
Click to collapse
Awesome, ill give this a shot, thank you much
Sent from my PC36100 using XDA Premium App

Clocking: Do you OC or UC? What are your thoughts?

Do you overclock or underclock? If so, to what point? If not, why not? What clocking profiles/situations do you have set up? Share your thoughts and experiences.
Sent from my Inspire 4G
EDIT:
Below is the setup that has worked best for me, in terms of performance and battery life. I seem to have found a good balance.
1.2 GHz/245 MHz (Conservative)
Profiles
Screen Off - 768/245 MHz (Conservative)
Charging - 1.2 GHz/245 MHz (On Demand)
In Call - 1 GHz/245 MHz (Conservative)
*Profiles are ordered in terms of priority (e.g., if I am on a phone call and my phone is charging, the charging profile is activated).
*I'm also undervolted.

I keep my phone at ~.7GHz (underclocked) when on battery, 1GHz when on charger, and have profiles for medium (~1.3GHz) and max OC (~1.7GHz), as the kernel will allow, in case I need the extra power for something (like FPSe, chainfire, etc).

I keep mine at 500Mhz...gingerbeast is so beastly it can run decently even at about 200Mhz, I only use maximum...1900Mhz when I am showing off.
Sent from my Inspire 4G using XDA Premium App

ThEiiNoCeNT said:
I keep mine at 500Mhz...gingerbeast is so beastly it can run decently even at about 200Mhz, I only use maximum...1900Mhz when I am showing off.
Sent from my Inspire 4G using XDA Premium App
Click to expand...
Click to collapse
Damn if it doesn't. Never tried it but since you said it I figured I'd test it. Typing this this at 245mhz, and it actually functions decently, even scrolling this page. I tried this with my captivate and it wouldn't even swipe screens. I'm kinda amazed right now.

ThEiiNoCeNT said:
I keep mine at 500Mhz...gingerbeast is so beastly it can run decently even at about 200Mhz, I only use maximum...1900Mhz when I am showing off.
Sent from my Inspire 4G using XDA Premium App
Click to expand...
Click to collapse
Wow! If that's the case, I may have to give Gingerbeast a shot
Sent from my Inspire 4G

I keep mine at 768 Mhz when on battery. Just to save some power. But i could even go down to 368 Mhz (which i have <50% battery) and it runs decently. I'm using CM7.

what is this overclocking? and how do i check speeds?

2nr808 said:
what is this overclocking? and how do i check speeds?
Click to expand...
Click to collapse
Just make sure you have root and use setcpu from market
Sent from my Inspire 4G using XDA Premium App

i use LeeDroid's GB rom setting smartass setcpu at 245-1036 MHZ
battery can last long time

is there a free version because the only one i see a paid version

Im at 1344mhz daily with absurdly outstanding battery life on leedroid 3.1.1. And I'm using antutu CPU master cause setcpu wouldn't let me adjust the slider. No problems whatsoever.
sent from my Inspire 4g - hacked and slashed - Leedroid_3.1.1 - 1344mhz

Before my phone got jacked "another on the way" i run TPGB with ~1.5ghz top and .232ghz low. Smartass govener, and i use my phone alot. I easily got over a day. Thats with tethering-games-email-calls-messaging,
Sent from my VEGAn-TAB using Tapatalk

I was running at max OC (1.8Ghz with LeeDroid's kernel) for a little bit, but realized I didn't need the speed. Since I'm a PC overclocker as well, I couldn't just let things be at stock, so now I'm at 1.267Mhz max, and .245Mhz min. I'm doing my best not to bump it up more, and going to see how much I get out of my phone. I'm a very light user most of the time, so it's sometimes hard to gauge.

I overclocked for the same reason I OC'd my PC, because I could. That said, I'm running MDJ's kernel on Inspired Ace with the smarta** governor set at 245 min and 1400 max.

Seeing several people using smartass governor. I've been using ondemand....I'm gonna run smartass today and see what happens....
Sent from my Inspire 4G

Mine is at 768 all time, with just one profile that kicks when battery heat crosses 46 C that sets max speed at 537.
Adjusted both to 614 and 384 respectively after looking at above posts.

OC'd and [email protected]
using setCPU and being on CM7, i overclock to 1.7 ghz while the screen is on, using the interactive gov. i also set up a "screen off" profile that is underclocked to 247? mhz so that while my phone sits in my pocket for the majority of the day or on my desk, etc, etc.... it conserves quite a bit of power.
ive been using this set up since i got my inspire on cm7 (whenever that had its first RC) and im getting anywhere from 48-60 hours of usage.
my daily usage includes: tethering, streaming audiogalaxy, ghosttown, pandora. camera stuffs, calls, texts, 2 email accounts syncing, twitter, facebook, calendar, palmary weather updates, and much more stuff. so im going to stick to this set up until someone says they can get more usage with all that going on.

I run min(250 IIRC) and max(1.5) using on-demand.

I was overclocked at 1800 but my phone would freeze sometimes to where i had to pull my battery. So I tried 1000 but 2 days and then 1500. I noticed little difference in battery us and speed. I stuck with 1500 but after reading this thread i am gonna try 750. I never used any battery monitoring widgets. Im gonna try that. I use Leedroid GB btw.

I'm running at 1.2ghz with Coredroid and am happy.

lowest safe cpu speed for screen off and in call?

trying to make some custom setcpu profiles and curious if anyone knows what the lowest safe cpu speed for when the screen is off and also while in a call and the screen is off?

Right now I'm on VI and I'm running 368 max and 245 min which is the lowest min for this rom. I always run the lowest on min and 1 higher for max on sleep settings. I don't encounter any issues.
Sent from my HTC Glacier using xda premium

Don't go below 200 when screen is off. You'll get the "sleep of death" at the most inconvenient times.

estallings15 said:
Don't go below 200 when screen is off. You'll get the "sleep of death" at the most inconvenient times.
Click to expand...
Click to collapse
I have never dealt with that issue.
Sent from my HTC Glacier using xda premium

coupetastic-droid said:
I have never dealt with that issue.
Sent from my HTC Glacier using xda premium
Click to expand...
Click to collapse
Well don't do it or you will
Sent from my MyTouch 4G using xda app-developers app

OP, you may want to look into andrev_oc or virtuous oc daemon. Both are superior to setcpu profiles.

estallings15 said:
OP, you may want to look into andrev_oc or virtuous oc daemon. Both are superior to setcpu profiles.
Click to expand...
Click to collapse
Nope, they aren't, i have programed scripts for both and I own SetCPU. Stick with SetCPU
Sent from my HTC Glacier using xda app-developers app

bas3balman said:
Well don't do it or you will
Sent from my MyTouch 4G using xda app-developers app
Click to expand...
Click to collapse
I have already gone under 200mhz for sleep frequencies. Android revolution goes under 200 and I would run it under 200 always till now that I'm on VI.
Sent from my HTC Glacier using xda premium

I run lowest at 187MHz @ 700mV without any problem. I also set my screen off freq to that. Never tried one below that freq.

Here's a little info on using an overclocking daemon vs setcpu taken from the virtuous unity thread.
Introduction to the new Overclocking Daemon
This ROM features a completelynew wayof Overclocking and managing screen states.
The History But before explaining it further, let's talk about previous solutions. There are several different approaches to achieve "screen-state-scaling". That means basically thatthegovernor changes if you turn the screen off and changesbackto normal when turning the screen on.
This is mainly used to restrict the amount of CPU usage (the frequency in fact) during screen off. This can lead to a major battery life increase.
The solutions so far were:
Apps likeSetCPU,which changeautomaticallythe governor based on profiles Integrated solutions in the governor itself
Both these solutions have major problems.
The one with a tuner app is always a little laggy right after turning on the screen because SetCPU (or any other CPU tuner) needs some time to change the governors (up to 7 seconds). This leads mostly to major lag in the lockscreen.
The second solution is the smartass governor. It has already a screen-state-scalingincluded,so it reduces the frequency when the screen turn off. This could be a really nice solution but it has some problems too. Smartass most of the time is not really stable and has problems with its frequency scaling.
Be aware that the daemon only works if all CPU tuner apps are deinstalled. Otherwise it deactivates itself.

ibuddler said:
I run lowest at 187MHz @ 700mV without any problem. I also set my screen off freq to that. Never tried one below that freq.
Click to expand...
Click to collapse
Thats very low. Surprised you do not get any issues.

Wish I could find the thread, but I was on a custom ROM that set the minimum CPU frequency to something below 200 by default, and I couldn't send text or MMS messages. Really weird.

Best overclock value

Hello,everyone....recently I overclock my desire s and thanks to many of you I received many useful information so I want to share impression how overclocking has improved performance and battery to help other like us to know what and how to use overclocking and governor....
So I start ....
I use Viper saga with tweaked kernel 3.x/ondemand with deadline/cpu min.245-max.1410
I noticed that my graphic is very good and everything works like a charm....for example in FIFA12 I noticed that even the shadow of all player are so intense and everything is so clear,it seems that improves my graphic and my phone is faster..I hope that overclocking to 1410 to not damaged my phone.So what configuration do you have ?
Sent from my HTC Desire S using xda premium

Set the governor to performance. Battery eater though. But u only can choose better battery life or smoother graphics, so make up ur mind and choose one :thumbup:
When playing with overclocking unstick 'set on boot'. So that it goes back to normal once reboot in case of any freeze. Overclock it based on ur desired value, experiment with it, slowly. increase the value step by step. Leave it for a day then increase again. If it freezes then u know ur phone's limit.
Sent theDesiredS

i have read that people say it's stable up to 1.5 GHz.
I have set mine to 1.3GHz to be on the safe side.
And set it to,on demand,so it only takes up more when it needs to.
setting it up to high speeds can result in a melt down,draining batteries and will shorten out the life of your phone even when stable for a couple of days so be aware of what your doing...

there is no best value for everyone, some say 1ghz is enough, some say 1.5 ghz is not enough.
so it depends on what you need, its a trial and error thing
u will get a fast response phone but battery life is sucs ... cant complain though

LOL? :what: how many threads must u made to ask a question? answer can be found here http://forum.xda-developers.com/showthread.php?t=2092673:D
why not just continue on your thread?
Sent from my supercharged tank

Right now I'm using PACman v19.3 and I can get up to 1.8ghz no lag but battery life can sometimes get a little bit bar but works like a dream on games
Sent from my HTC Desire S running ViperSAGA v1.1.0 Full Sense 4.1

king of disaster said:
i have read that people say it's stable up to 1.5 GHz.
I have set mine to 1.3GHz to be on the safe side.
And set it to,on demand,so it only takes up more when it needs to.
setting it up to high speeds can result in a melt down,draining batteries and will shorten out the life of your phone even when stable for a couple of days so be aware of what your doing...
Click to expand...
Click to collapse
How do you managed to set to 1,3Ghz?I have CPUset and I don't have the value 1,3 Ghz....
Sent from my HTC Desire S using xda premium

ifti786 said:
Right now I'm using PACman v19.3 and I can get up to 1.8ghz no lag but battery life can sometimes get a little bit bar but works like a dream on games
Sent from my HTC Desire S running ViperSAGA v1.1.0 Full Sense 4.1
Click to expand...
Click to collapse
What kernel you have?
Sent from my HTC Desire S using xda premium

Never a good idea to overclock CPU more than 1.5 GHZ . That is the maximum stable frequency for our processor.
I use my phone at 1.2 GHZ.
Tapatalked from Desire S running Andromadus

What is the best application for overclock?
for example when I play a game to switch automatically to my desire frequency and governor?Now I have Cpu master but unfortunately i don't have more option for profile ....and is it possible to set frequency to 1300Mhz ?
Sent from my HTC Desire S using xda premium

AW: Best overclock value
petrevirgil said:
What is the best application for overclock?
for example when I play a game to switch automatically to my desire frequency and governor?Now I have Cpu master but unfortunately i don't have more option for profile ....and is it possible to set frequency to 1300Mhz ?
Sent from my HTC Desire S using xda premium
Click to expand...
Click to collapse
If you want separate screen on/screen off profiles, I would recommend daemon controller app (with andrev_oc installed through the app).
If you want more profiles for different situations, setcpu is probably the only real option.
Setting to 1.3 GHz depends on the kernel you're using, not on the app.

teadrinker said:
If you want separate screen on/screen off profiles, I would recommend daemon controller app (with andrev_oc installed through the app).
If you want more profiles for different situations, setcpu is probably the only real option.
Setting to 1.3 GHz depends on the kernel you're using, not on the app.
Click to expand...
Click to collapse
I use tweaked kernel 3.x but i dont have the option to set to 1300....I have all value from 245 to 1495 but 1300is missing...
Sent from my HTC Desire S using xda premium

petrevirgil said:
Hello,everyone....recently I overclock my desire s and thanks to many of you I received many useful information so I want to share impression how overclocking has improved performance and battery to help other like us to know what and how to use overclocking and governor....
So I start ....
I use Viper saga with tweaked kernel 3.x/ondemand with deadline/cpu min.245-max.1410
I noticed that my graphic is very good and everything works like a charm....for example in FIFA12 I noticed that even the shadow of all player are so intense and everything is so clear,it seems that improves my graphic and my phone is faster..I hope that overclocking to 1410 to not damaged my phone.So what configuration do you have ?
Sent from my HTC Desire S using xda premium
Click to expand...
Click to collapse
I think the stable is 1,2~1,3GHz, but u can overclock it up to 1,5ghz but it eats your battery... so be careful!

dave3002 said:
I think the stable is 1,2~1,3GHz, but u can overclock it up to 1,5ghz but it eats your battery... so be careful!
Click to expand...
Click to collapse
Thanks but how can I set to 1300?....I don't have that value in setCPU....
Sent from my HTC Desire S using xda premium

[Q] Safe Overclock

Hi yes im new but not quite a noob :cyclops:
There with that out of the way my overclock settings are 1200mhz min 1600mhz max
so far running great with the HellyBean rom
But how would this effect my phone long term if any and I would like to be able to moniter my cpu temp like I do on my pc
but the thread http://forum.xda-developers.com/showthread.php?t=1140371&highlight=cpu+temp
has some good apps but they don't say cpu temp just the battery temp unless there interlinked some how
Thanks for looking

No temp sensor on the infuse except for battery.
1200 is really high for a minimum... This should be 100. For performance set governor to ondemand.. This will Max the cpufreq on any load. When idle, freq will drop and save battery and cool phone.
Running for extended periods at 1600 your phone will get very warm to the touch.. Combo of cpu and screen... If plugged into charger that will add more heat.
Battery Monitor Widget is a good app for tracking battery temp and related stats over time.
Sent from my SAMSUNG-SGH-I997 using xda premium

Thanks ya I figured it was a bit high

Do 100 min and 1400 max
And governor to on demand
Also i set up profiles with set cpu so when screen is off the maximum goes down to 400mhz.then screen on profile the max is 1400.it saves battery
Sent from my SGH-I997 using Tapatalk 2

How do you set up profiles?
Sent from my SGH-I997 using xda app-developers app

Use a CPU manager like SetCPU ($). Voltage Control or Antutu CPU Mgr may also have profiles.. Not sure -it's been a while since I used either.
Sent from my SAMSUNG-SGH-I997 using xda premium

The only ones I found so far that have profiles are pay for but once I get one I think its going to be either ROM manager or antutu
Sent from my SGH-I997 using xda app-developers app