I would love some help, can someone tell me how to install a rom using Rom Manager. I've install clockwork recovery downloaded CM7.2 for my ascend. Can I install this, using Rom Manager? I have premium, but I have ruined 2 zio m6000 , 1 samsung moment, and 1 ascend. Up really dont want to loS another phone. Could I get a hand, here? I havE nO clue whaT half the things talked about on here are. But, its starting to cosT to much $ learning.
Sent from my M860 using XDA Premium App
As we are speaking about ROMs, any wrong operation can turn your phone in a simple book holder. I am not expert (bought my first HTC 3d ago), but already have good experience to help you A BIT.
- enter ClockWork (reboot your phone, press volume-down as it starts, navigate and enter RECOVERY mode: clock-work is installed in the recovery zone; some ROMs may have a reboot-to-recovery feature)
- navigate and wipe system, user-data, and cache zones
- navigate in menus a either perform a restaure, or apply-patch-from-zip depending on your type of ROM (IMG, zip ... )
You can also try to install your ROM without wipe, BUT, if you see CW does NOT says it will erase or format the partition first, then you are going to have troubles (small troubles: it will boot, but not work properly). You can start by this operation, and when you have found how to flash, then you wipe ... this will avoid having an empty system, and have your phone unusable for a time.
If you have a broken system, you can always put the SD card into computer and push a working rom using SD (then CW) or fastboot.
After successfull flash, you may want to wipe user and cache zones. Again, it just helps having a clean system, and is not mandatory; keeping old user-data usually works, but CAN make bugs trigger.
At your own risks. Good luck.
- how to flash my Samsung Galaxy S Fascinate CDMA. using Rom Manager. with file name .ota .? huhuh. sorry, i'm noob in this kind of thing.!! i;m begging you guys.!! help me , i'm stock to Eclair 2.1 and i hate it,! thanks.!!
-help me guys.!!! thanks.
kakroch99 said:
-help me guys.!!! thanks.
Click to expand...
Click to collapse
Learn to help yourself. You are not asking a new question.
1. Use the search function.
2. Use Google.
3. Research!
4. Read, read, read!
5. Don't actually try any modifications until you're confident you know what you're doing and willing to accept the consequences if you screw up.
6. If you fail, do more research and reading so you can...
7. Try to fix it yourself before asking for help.
8. Ask intelligent questions if you do still need help.
Sent from a HTC G2
I've been trying to install a custom ROM for the past 3 days and every time I try I wind up with the same phone and a giant headache.
I did take the plunge and have rooted my phone, but I'd like to really get rid of the lagging and force close issues that have rendered my phone darn near unusable, since I've updated my phone to KG2.
I've searched for a KG2 ROM and I think I've found one, [ROM][CWM][KD1-KG2] TouchMIUIwiz v2.0 - Public Release [8/11/11], but when it comes down to installing it I'm confused by two things upfront:
To my understanding CWM is the same thing as booting into recovery using the 3 button combo, is that right? I read the Complete Noob FAQ and it seems to say so, but I'm wondering if I'm supposed to install another version...??? I dunno.
When I do try to install a custom ROM, I have to wipe the Dalvik cache from an advanced menu of some sort and I have to change the mounts...from where?? I feel slow because I don't get it, I feel like I'm missing something.
I've read through countless posts and I haven't quite found what I'm looking for, the Complete Noob FAQ has helped a great deal, but so far the only thing I've developed is a huge headache.
Anyone who can help, I'd greatly appreciate it. Thanks in advance.
i posted this a few times and im sure it can help you
download:
http://www.krylon360.com/file_host/sk4g/recovery.zip (This is the recovery.)
http://www.krylon360.com/file_host/sk4g/update.zip (this is the update)
You need a file manager for this such as root explorer or astrid
open the first zip file (recovery file) on your computer and take out the recovery file inside it (should be the only file) and place it on the sd card.
place the second file (the update file) on the root of your sd card
and install a file manager
now open file manager scroll down and find sdcard,
now open it and find recovery and long press on it. hit copy. now hit the back button once.
now find system. open it.
find bin. open it.
hit on the top mount r/w
hit paste and overwrite the file.
next, power down the device and instead of powering on regularly, press volume down+ power button or volume up+volume down+camera+power on you should be in the recovery mode.
then hit re-install packages,
NOW YOU HAVE A CWM
Goodluck and have fun flashing.
to flash you have to download the zip file
boot into recovery using 3 button combo (volume up + volume down + power button)
wipe data/factory reset
wipe cache
wipe dalvik in advanced menu
choose :install zip from sd card
choose the rom you've downloaded and out on your sd card
wipe the dalvik cache from advanced menu
reboot system
you will be at the samsung boot up screen
you will hear a girl robot voice talk for about 5 minutes then you will get a boot animation and you will be good!
Ok, I downloaded ASTRO File Manager, and I've placed the recovery file on the SD card through Mass Storage. However, for the update file, there are a bunch of folders in that zip, I've just placed the unzipped folder on the sd card, is that right??
yup thats right! dont unzip the update file
Okay, I copied the original just in case, because there was one already in there that I had to overwrite.
As for the File Manager I downloaded ASTRO but it doesn't have an option to copy the recovery file, so I'll download another, but do you know of a free option?
Thank you so much for your help so far, I really appreciate it, it seems so easy the way you've put it, so thank you.
Sorry I don't know why I asked u for another option. I've been on grapes and carrots for the past 3 days so my brain cells are kind of slow to rub together. Lol
I have found one that will work and I think I'm good from here on out, again I really appreciate you being so helpful. I'm on my way to El Pollo Loco to get some real food, thanks!
Sent from my SGH-T839 using XDA App
PinkSugarBomb said:
Sorry I don't know why I asked u for another option. I've been on grapes and carrots for the past 3 days so my brain cells are kind of slow to rub together. Lol
I have found one that will work and I think I'm good from here on out, again I really appreciate you being so helpful. I'm on my way to El Pollo Loco to get some real food, thanks!
Sent from my SGH-T839 using XDA App
Click to expand...
Click to collapse
no problem if you need more help just pm me!
Hi everybody!
first of all... I now I'm a noob and that i've done bulschit..
I have an htc desire, i've rooted the device and before i partitioned the sd card I've flashed leedroid 3.0.8.2, after that... I wasen't be able to delete sys apps... but I decided to don't worry abou that... after a while my phone runs out of memory... so I've tried to partition my sd cart with rom manager pro... but it doesn't work... I thought it was a firmware problem so I've downloaded leedroid hd 3.3.3 and tryed to flash it on my device...
the result was that when I start the phone it shows the black screen whit the white lettering I don't know what's the name for... it's the screen where the phone makes that strange noises... aniway the screen runs over and over again non stop!!!
what can I do now? how can i repair to my faults?
I'm sorry that my englisch is so bad...
I hope you will try to help me!! you're my last chance...
Reboot into recovery
Clear cache
Factory reset
Clear Dalvik
Try the 3.3.3 again
Reboot
Sent from my U8150 using XDA
I've tried 3 times... always with the same resoult...
Your zip is broken, download from a different site
Sent from my U8150 using XDA
wow... I've tried another leedroid version... my phone is back!!
the problem is that I'm still not able to uninstall sys apps and to partition the sd card... D: hope you can help me!!
To partition reboot into recovery and run it from there.
YOUR MEMCARD WILL BE FORMATTED
back up the drive in a computer first(ctrl A copy paste to something like drive c)
I suggest a 512Mb - 0 partition.
Sent from my U8150 using XDA
Which system apps can't you chuck?
Sent from my U8150 using XDA
it says can not uninstall app, an unknown error occured...
I've tried to uninstall Footprints, Java box, google talk, peep, twitter, flikr...
I've not understand this part " back up the drive in a computer first(ctrl A copy paste to something like drive c) "
and... in my recovery mode isn't the option "partition sd"
tnx again for continuing helping me!!
What I meant was copy your entire memory card before trying to partition it,or loose everything in it.(including apps moved there)
To copy it just plug your phone into a comp ( my prefered method) and turn on USB. In My Computer a removable disk should show.Copy everything in removable disk(cntrl+A selects all)(right click then choose copy) and paste it in a new folder somewhere else...(right click,choose new folder,inside the new folder right click,choose paste)
Sent from my U8150 using XDA
I use clockworkmod so I just go to advanced menu and partition sd card is right there.
Sent from my U8150 using XDA
As for the system apps chuck them using titanium backup. It's in the market.
Sent from my U8150 using XDA
I'll try...
Did a little checking and it would appear your phone is S-ON. Search the threads about S-OFF.
Imetumwa kutoka Ideos kutumia XDA
" S-ON
"I'm S-ON, I can't boot recovery, and my phone doesn't boot "
This is a bit of a worse situation, as you cannot flash system critical parts such as the recovery image and just restore a backup. This unfortunately means that you will lose all of your data when you attempt to fix the phone.
[STEP1]- Make sure that you have a goldcard. If not, create one from the tutorial.
[STEP2]- Battery pull. Hold the BACK button and the POWER button to boot into FASTBOOT mode.
[STEP3]- Download the latest WWE RUU from here
[STEP4]- Run the RUU and wait for completion WARNING: DO NOT, BY ANY CIRCUMSTANCES INTERRUPT THE PROCESS - THIS WILL MORE THAN LIKELY END UP WITH A BRICKED PHONE - NOT EVEN IF GOD HIMSELF TELLS YOU TO DO SO, OR IF THE US PRESIDENT THREATENS YOU WITH THERMO-NUCLEAR WAR
[STEP5]- Once the phone is booted, you are now returned completely to stock. You will need to re-root again, and I'd recommend S-OFF"
is this the right solution??
or should I do what the guy in this video shows?
http://www.youtube.com/watch?v=_cw9xkS20i0
It appears to be a factory reset tutorial. That's a radical maneuver, I don't think you are that far lost,you have a custom Rom and working recovery. I'll find you something safer,and watch the video, then get back to you. I don't have a desire.
Go to forums/ htc desire/ desire q&a and look in stickies. Bortak's troubleshooting guide
Sent from my HTC Desire
found... it's here " http://forum.xda-developers.com/showthread.php?t=1275632 " there are soo many infos that I don't know what I have to do... what is a RUU??
@[email protected] I'm sorry for my "noobness" but please help me! I just want to security-off right?!?
What you need to follow is [3] s-offing problems.
It'll start you from square one and take you all the way,and obviously, avoid problems. They recommended a 2 Gb Kingston memory card. I'd find one. You're going to need a PC and lot's of downloads. I'd download everything required before trying any of the steps. Better safe than phoneless.
I figured you'll need
1-Drivers installed in your PC(follow the #didn'twork guide to get them - rather have it work first time)
2-bravo stock from the graph in alpharev's website
3-Unrevoked3 (link to it is in the tutorial)
4-The Kingston card to use to make your goldcard ( link to making goldcard in tutorial) and a SD reader to plug it alone into your PC
5-RUU download.(link in tutorial)
6- Disable HTC SYNC
Get these things before starting. They're all there in tutorial [3]. You WILL TYPE CODE in this tutorial and that's where your phone is most likely to brick. DONT misspell.DON'T put spaces unless where you we're told to. I'd write it on paper and check it before typing it in for real, so pen/ paper with you.
Imetumwa kutoka U8150 kutumia XDA
OK I apologize ahead of time for what is probably a ridiculously easy question for most.
The ATT 1X is my first android and this is the first phone that I've rooted.
I read for hours and followed the instruction to a T. I rooted, unlocked the bootloader and installed CWM.
I can get into Recover/Boot mode or whatever you call it on phone startup, I have the Super user icon in my files, but I have no idea what to do now.
I found a ROM that I thought was worth a shot (CleanROM 2.5) but I don't know what to do. I've read and researched for hours now and everyone's problems seem to be complicated but no one talks about this.
I downloaded the ROM to my computer but I don't know what to do with the files, I can't find a .bat file or anything to initialize it and I am stuck.
I've wiped the data and done everything in the steps but I'm stuck at actually installing it. I know I'm obviously doing something wrong but I feel like I'm very close to what needs to be done.
Any help is welcome, thanks
deblas66 said:
OK I apologize ahead of time for what is probably a ridiculously easy question for most.
The ATT 1X is my first android and this is the first phone that I've rooted.
I read for hours and followed the instruction to a T. I rooted, unlocked the bootloader and installed CWM.
I can get into Recover/Boot mode or whatever you call it on phone startup, I have the Super user icon in my files, but I have no idea what to do now.
I found a ROM that I thought was worth a shot (CleanROM 2.5) but I don't know what to do. I've read and researched for hours now and everyone's problems seem to be complicated but no one talks about this.
I downloaded the ROM to my computer but I don't know what to do with the files, I can't find a .bat file or anything to initialize it and I am stuck.
I've wiped the data and done everything in the steps but I'm stuck at actually installing it. I know I'm obviously doing something wrong but I feel like I'm very close to what needs to be done.
Any help is welcome, thanks
Click to expand...
Click to collapse
I recommend you check QA thread found in a sub forum under your devices section and you review the stickied post for ROM install or Google "android install custom ROM " (remove quotes). Too much info on this already to type it all back out here. Did you watch you tube newb video you agreed to have watched when getting an xda account?
Essentially you now made it so your phone has the ability via CWM Recovery to now boot to that to install ROM zip or continue to use rooted stock ROM (how you flashed that zip for superuser is baasically same as how you flash a cwm compatible ROM zip (MOST but not all ROMs)) which with SuperUser can now run privelleged code if it is made to or requires it to run.
Sent from my SGH-T989 using Xparent Green Tapatalk 2
Thanks. I know this must seem so stupid, but I've been searching this forum, google, youtube and pretty much everything else for how to do this and I get it all and understand what's happening.
I just don't know where to put this ROM (which folder) to get it to install.
deblas66 said:
Thanks. I know this must seem so stupid, but I've been searching this forum, google, youtube and pretty much everything else for how to do this and I get it all and understand what's happening.
I just don't know where to put this ROM (which folder) to get it to install.
Click to expand...
Click to collapse
So after all that searching you never came across instructions informing you to put the zip on your phones storage?
You should probably just hold off a bit on flashing anything then. Not being mean but it sounds like you are confused by the process and end result. Step back and do some basic checklisting.
Sent from my HTC One X using Tapatalk 2
Download the rom you want and DO NOT UN ZIP IT. THEN PLACE THAT ZIP ON PHONE STORAGE AND BOOT INTO YOUR CUSTOM RECOVERY . HIT INSTALL FROM SD CARD AND MAKE SURE THE ROM YOU DOWNLOADED IS LISTED BUT DONT FLASH YET. GO BACK THE THE MAIN SCREEN OF RECOVERY. NOW MAKE A BACKUP. WHEN THAT IS DONE GO BACK TO MAIN RECOVERY SCREEN AND HIT WIPE PHONE DATA AND THEN CONFIRM. THEN GO AND HIT CLEAR CACHE OPTION. THEN GO BACK AND GO TO ADVANCED AND CLEAR DALVICK CACHE. NOW YOUR READY TO FLASH. GO TO INSTALL ZIP FROM SD AND FLASH YOUR ROM. FIRST BOOT ALWAYS TAKES LONG AFTER FLASHING A NEW ROM :thumbup:
Sent from my HTC One X using XDA
Pirateghost said:
So after all that searching you never came across instructions informing you to put the zip on your phones storage?
You should probably just hold off a bit on flashing anything then. Not being mean but it sounds like you are confused by the process and end result. Step back and do some basic checklisting.
Click to expand...
Click to collapse
Been posting on the internet for decades, don't worry about being mean. I'm here to learn. I rooted, unlocked the bootloader and installed CWM so that I could take advantage before the phone asked me to update the software to the 1.85 version.
My phone works fine now, and I did everything correctly which is what I was setting out to do. I'm in no rush to flash a ROM, but now that I'm ready I'm itching to try it out.
Driggity420 said:
Download the rom you want and DO NOT UN ZIP IT. THEN PLACE THAT ZIP ON PHONE STORAGE AND BOOT INTO YOUR CUSTOM RECOVERY . HIT INSTALL FROM SD CARD AND MAKE SURE THE ROM YOU DOWNLOADED IS LISTED BUT DONT FLASH YET. GO BACK THE THE MAIN SCREEN OF RECOVERY. NOW MAKE A BACKUP. WHEN THAT IS DONE GO BACK TO MAIN RECOVERY SCREEN AND HIT WIPE PHONE DATA AND THEN CONFIRM. THEN GO AND HIT CLEAR CACHE OPTION. THEN GO BACK AND GO TO ADVANCED AND CLEAR DALVICK CACHE. NOW YOUR READY TO FLASH. GO TO INSTALL ZIP FROM SD AND FLASH YOUR ROM. FIRST BOOT ALWAYS TAKES LONG AFTER FLASHING A NEW ROM :thumbup:
Click to expand...
Click to collapse
This is the process as I understand it and as stupid as it sounds, I'm hung up on where in phone storage to place the zip file of the rom. I don't see a storage folder, an SD folder, nothing that seems obvious and nothing that is in any of the things I've been reading or watching.
deblas66 said:
Been posting on the internet for decades, don't worry about being mean. I'm here to learn. I rooted, unlocked the bootloader and installed CWM so that I could take advantage before the phone asked me to update the software to the 1.85 version.
My phone works fine now, and I did everything correctly which is what I was setting out to do. I'm in no rush to flash a ROM, but now that I'm ready I'm itching to try it out.
This is the process as I understand it and as stupid as it sounds, I'm hung up on where in phone storage to place the zip file of the rom. I don't see a storage folder, an SD folder, nothing that seems obvious and nothing that is in any of the things I've been reading or watching.
Click to expand...
Click to collapse
Plug phone into computer. When prompted, select Disk Drive. On computer, browse to your computer, open the 'disk drive', and copy the zip there. THAT is your sdcard as seen by your phone.
Pirateghost said:
Plug phone into computer. When prompted, select Disk Drive. On computer, browse to your computer, open the 'disk drive', and copy the zip there. THAT is your sdcard as seen by your phone.
Click to expand...
Click to collapse
Seriously?
Wow I feel dumb. I was looking for a sub folder or directory specifically for storage and backup.
Thanks, I think that should be enough for me to do this tonight.
deblas66 said:
Seriously?
Wow I feel dumb. I was looking for a sub folder or directory specifically for storage and backup.
Thanks, I think that should be enough for me to do this tonight.
Click to expand...
Click to collapse
Yeah, some phones you may have to drag down notifications and tap USB mode or USB connected notification (it has standard USB icon and only appears when phone attached to computer). Then tap either USB storage mode or the button to enable USB drives. Then on computer just like a thumb drive it adds drive letter. Copy anything there that is /mnt/sdcard or /sdcard on phone. BE SURE TO EJECT DRIVES BEFORE AND TAP TO DISABLE USB ON PHONE IN THAT ORDER THEN UNPLUG FROM USB (failure to do so COULD result in data loss or corruption which you DO NOT want to happen to a ROM zip)!
Then boot in to recovery choose install zip from sdcard (not apply update from sdcard) as install from allows you to browse for any zip and install. Usually Vol up and down moves through menus and power or search button is enter. BE SURE THE ROM YOU DOWNLOAD IS SPECIFICALLY MEANT FOR YOUR DEVICE OR YOU COULD EASILY BRICK YOUR DEVICE. PLEASE REVIEW HOW TO RUN NANDROID BACKUPS AND RUN ONE BEFORE INSTALLING A DIFFERENT ROM.
I CAN NOT STRESS ENOUGH IF UNSURE DON'T PROCEED, BE SURE YOU RUN NANDROID BACKUPS AND ENSURE YOU FOLLOW INSTALL DIRECTIONS INCLUDED WITH YOUR ROM. ALSO, NEVER FORMAT EMMC (AKA INTERNAL SDCARD) IT ALMOST GUARENTEES A BRICKED DEVICE.
Sent from my SGH-T989 using Xparent Green Tapatalk 2
Wow that was easier than I thought.
Thanks for the help guys and sorry I missed such an easy step.
ROM installed.
deblas66 said:
Wow that was easier than I thought.
Thanks for the help guys and sorry I missed such an easy step.
ROM installed.
Click to expand...
Click to collapse
Is all good, and now you see why we were kinda scratching our heads wondering what was up a little . Glad we could help get you going though welcome to the world of custom ROMs. Please just be careful and always do backups and take it slow and read things 2x before even attempting once. While it can be easy to do it is also easy to accidentally brick your device (make it not work and have to be sent out for repairs).
Sent from my SGH-T989 using Xparent Green Tapatalk 2
Hey XDA ! =D
I'm still interested in installing Cyanogenmod 10 on my LG Optimus One P500h, but I want to make sure I follow the steps properly first - this is my first time installing a custom ROM, and when I heard it was possible to install Android 4.0 on the P500h, I performed a backup from ROM Manager, and I "bricked" my device a few days ago. XD
I wouldn't want this to happen again, but at least, I must say I have more experience now, and learned a lesson.
Did many searches on how to install CWM with Cyanogenmod 10, I found many different ways to do it, and I'm still unsure of which procedure follow.
Read the FAQ and that was really helpful.
I will list the procedure that I would normally try - please correct me if I forget anything:
0. Root the device
Done that already. I'm on Android 2.3. When I flashed the KDZ on my LG (and so to my surprise, got me updated from 2.2 to 2.3.3) , I've used V20A_00.KDZ, so I *assume* this is the second baseband.
1. Compact/Trim Cyanogenmod ROM
Downloaded CM10 here. This look correct: http://forum.xda-developers.com/showthread.php?t=1811325
January 8: Build 7/Final
I chose C10 over C11 because more things are compatible I believe - was it Bluetooth that did not worked under C11, but does on C10 ?
Anyways, that solve a known problem: many users said they loose network after the ROM installation. Shinobisoft confirmed it was because of the lack of space on the System partition, right ? Compacting the ROM would also fix problems for installing Link2SD ?
I've downloaded the tool "OOne ROM Editor" and opened it - it doesn't look complicated at all. What apps are safe to delete ? Will converting them to "user app" save space for system apps (I'm not sure - Where are the apps stored when defined as "User"? SD card rather than /System ?) ? Can I delete fonts without problems (I don't see why I can't keep ONLY 3-4 fonts, not 10) ? Then how much space will be left on the device ?
Read I cannot delete LatinIME.apk. Is this the default keyboard? 20MB is huge, there's no way to compact this file, right ?
Assuming there's like 10MB free, network will work, but I will have no choice but to use Link2SD to install apps fully on SD card, is this correct ?
2. Baseband stuff
Ehm, what are we referring to as "baseband" in first place?
All ROMs starting with CM7 are new baseband. If your device had Android 2.2 prior to flashing, you are on old-baseband. There is a patch for that also in the LG Optimus One FAQ on the first page, not sure which post off the top of my head tho. If your device had Android 2.3 on it then you have a new baseband device which shouldn't require any patches.
Click to expand...
Click to collapse
Allright, this should make this a lot easier - as I said, I originally was on Android 2.2, when I bricked the phone, I flashed "V20A_00" throught KDZ Updated, then I rebooted as 2.3.3, so I shouldn't do anything, right ?
In "About Phone", it's listed "Software Version: LG-P500h-v20a".
3. Install ClockworkMod Recovery
This look like the tricky part.
A lot of people on other sites said to use ROM Manager...
shinobisoft said:
First, serious word of advice. Stay away from ROM Manager. It does not handle this device correctly.
Click to expand...
Click to collapse
ROM Manager's way of flashing recovery is broken by design. Do NOT use it unless you are comfortable with rescuing your phone via ADB/fastboot like many people before.
Click to expand...
Click to collapse
Yes, ROM Manager is completely broken in this regard. It needs to download a signed ZIP and discard it and report an error when verification fails. Heck, ZIP format has even its own CRC check. What ROM Manager is doing (download whatever .IMG and flash it no matter what) is a nice WTF! Broken by design, go rewrite from scratch!
Click to expand...
Click to collapse
I don't trust the use of ROM Manager anymore on my device, and I'm not comfortable with using it again. I actually wonder: When I press VolumeUp-Home-Power, the phone perform a factory reset (Many people asked already why. This apparently mean that CWM is not installed).
But is it really installed? ROM Manager actually says: "Actual Recovery: ClockworkMod Recover 5.0.2.0". What? Am I supposed to press VolumeUp-Home-Power to verify, only to do another factory reset?
So what would the non-ROM-Manager method be ? I found this one here:
http://forum.xda-developers.com/showthread.php?t=1146566
I know about the Android Terminal Emulator already, and as a Linux user on PC, the commands "su", "cat", "chmod", "mount" are not unknow to me. I should be able to do this... That's not risky ?
So when CWM will be installed, I should be able to boot in it using "VolumeUp-Home-Power"; in theory, this is a bootloader, so if the ROM get screwed up, I *should* be able to access the bootloader to restore the ROM (I compare this to a PC BIOS - the OS is screwed, but BIOS remain accesible) ?
How could I explain that when I bricked my device with ROM Manager, I couldn't perform a factory reset, and only had access to Emergency Mode (I assume there is not such thing as a "Recovery Mode" on a P500h stock, new/untouched. The equivalent immediatly perform a factory reset) ?
All Android devices have a recovery partition. This is essentially a section of the device’s memory devoted to a very basic recovery system that is separate from the normal operating system. This is normally used by manufacturers for recovering a broken device (as even if the operating system crashes, the recovery image has a chance of still being access and used to reflash the operating system, etc.).
Click to expand...
Click to collapse
By default, the LG P500h recovery partition perform an immediate factory reset - CWM will be installed here, so I should be able to access it if the ROM freak out. But why couldn't I access the factory reset, when I bricked the device? That's what I wonder.
4. Access CWM and do a Nandroid Backup to SD Card
I will now have the files boot, cache, data, recovery and system, as well as"nandroid.md5" on SD card.
5. Wipe everything, clean SD Card
Perform "Wipe data/factory reset". This will format the /data, /cache, /sdext, and .android_secure
Select the "Advanced" option and on the next screen select "Wipe Dalvik Cache". Confirm the wipe.
Not necessary but I do it anyway, in the "Advanced" screen select "Wipe battery stats" and the confirm that wipe
For a clean installation I recommend formatting the system partition too. From CWM home screen select "mounts and storage". On the next screen select "format /system" and then confirm the format.
Press the back button until you are back in the CWM home screen. Select "Install zip from sdcard" and then select "Choose zip from sdcard". Browse your sdcard for the ROM to install and select it. Confirm the installation. Now wait for the install to finish.
Go back to CWM's home screen. Select "reboot system now" option and let the device boot. The initial boot will take a couple of minutes. Don't panic.
Click to expand...
Click to collapse
6. Partition SD card (?)
Is this at that point that I should do it, in CWM ? Or wait until I access Cyanogenmod and use a software on PC to partition ?
Assuming I don't partition, I guess I definitely will lack space for applications (Due to the space of Android 4.0) ?
I will do "Partition SD Card>EXT4 1024MB>Swap:64MB. Is this correct?
7. Install Cyanogenmod
Install ZIP from SD Card, choose the CM ZIP;
8. Install Google Apps
Once the install is done, I won't reboot and immediately install Google Apps, with "Install ZIP from SD card". I chose this package (Working on JellyBean):
http://forum.xda-developers.com/showthread.php?t=1917411
Then I should reboot in CyanogenMod and finally install Link2SD, I believe.
***
..Did I forgot anything ?
I *believe* that makes sense, but this is my first time installing a ROM - I doesn't look *that* hard, I did researches, but things can go wrong... :/
What should I do if I screw things up? Use KDZ Updater again ?
I'm still a little worried about that baseband thing, and the lost network connection.
Thanks for the input, cheers!
1) Use FlashImageGUI app to flash recovery/or use Recovery.IMG flasher by @shinobisoft
2) Forget the baseband stuff
3) Factory reset is the default action when you boot into stock recovery
4) If you partition SD card your data will be wiped anyway
Sent from my GT-I9082 using Tapatalk
akiratoriyama said:
1) Use FlashImageGUI app to flash recovery/or use Recovery.IMG flasher by @shinobisoft
2) Forget the baseband stuff
3) Factory reset is the default action when you boot into stock recovery
4) If you partition SD card your data will be wiped anyway
Sent from my GT-I9082 using Tapatalk
Click to expand...
Click to collapse
1) I've checked FlashImage GUI, it look really simple to use. This is what I see now:
https://dl.dropboxusercontent.com/u/67605655/snap20140216_103936.png
For flashing a recovery image, should I select Clear Dalvik & Clear Cache ? Do I have to enable USB Debugging?
Where can I find the recovery image for CWM ? Here maybe: http://forum.xda-developers.com/showthread.php?t=1523050
I don't know, I would download CWM v5.0.2.7_Touch_p500-Build 4.zip.
Would the terminal emulator method would be easier (I still need to find recovery.img)?
Code:
$ su
# mount -o remount rw /system
# cat /sdcard/flash_image > /system/xbin/flash_image
# chmod 755 /system/xbin/flash_image
# flash_image recovery /sdcard/recovery.img
# mount -o remount ro /system
# reboot recovery
Since I have no Nandroid backup (I cannot do it until CWM is installed), what could I do if something goes wrong ?
2-3) Excellent, thank you.
4) I plan on partitionning, but at which point shoud I preferably do it?
Thank you, I appreciate the help - sorry for all the newbie questions.
1) Recovery image is in the zip fie itself. Extract it
The terminal method you're telling is just what FlashImage GUI does (notice the word 'GUI' )
2) Partition it whenever you want. Just backup your stuff before doing it.
3) As much I hate to say, the thanks button is there for a reason
Regards,
akiratoriyama.
Sent from my GT-I9082 using Tapatalk
akiratoriyama said:
1) Use FlashImageGUI app to flash recovery/or use Recovery.IMG flasher by @shinobisoft
2) Forget the baseband stuff
3) Factory reset is the default action when you boot into stock recovery
4) If you partition SD card your data will be wiped anyway
Sent from my GT-I9082 using Tapatalk
Click to expand...
Click to collapse
akiratoriyama said:
1) Recovery image is in the zip fie itself. Extract it
The terminal method you're telling is just what FlashImage GUI does (notice the word 'GUI' )
2) Partition it whenever you want. Just backup your stuff before doing it.
3) As much I hate to say, the thanks button is there for a reason
Regards,
akiratoriyama.
Sent from my GT-I9082 using Tapatalk
Click to expand...
Click to collapse
Ok, so I've downloaded ClockworkMod_5.0.2.0_Recovery_ThunderG_Official here: http://forum.xda-developers.com/showthread.php?t=1523050
Extracted the ZIP and put the file recovery.img at the root of the SD Card (USB storage); so now all I have to do would be to start FlashImage GUI, select "Recovery Image", browse and choose the file recovery.img, then flash (I won't select Clear Dalvik & Clear Cache unless I have to (It's not selected by default, so I assume it's not require - although I've backed up my stuff already).
It's that simple?
I'm still in a learning stage, I bricked the device once with ROM Manager, so if that work, I should be more confident for the rest (I will take a Nandroid backup). Thanks for all the great explanations - Will press the thanks button soon
(How much thanks can I give per thread?)
GameX2 said:
Ok, so I've downloaded ClockworkMod_5.0.2.0_Recovery_ThunderG_Official here: http://forum.xda-developers.com/showthread.php?t=1523050
Extracted the ZIP and put the file recovery.img at the root of the SD Card (USB storage); so now all I have to do would be to start FlashImage GUI, select "Recovery Image", browse and choose the file recovery.img, then flash (I won't select Clear Dalvik & Clear Cache unless I have to (It's not selected by default, so I assume it's not require - although I've backed up my stuff already).
It's that simple?
I'm still in a learning stage, I bricked the device once with ROM Manager, so if that work, I should be more confident for the rest (I will take a Nandroid backup). Thanks for all the great explanations - Will press the thanks button soon
(How much thanks can I give per thread?)
Click to expand...
Click to collapse
Don't worry you won't brick it.
(Talking from my experience of completely hard bricking aka dead booting my device due to kdz)
Just flash it.
It's that simple
Sent from my GT-I9082 using Tapatalk
akiratoriyama said:
Don't worry you won't brick it.
(Talking from my experience of completely hard bricking aka dead booting my device due to kdz)
Just flash it.
It's that simple
Sent from my GT-I9082 using Tapatalk
Click to expand...
Click to collapse
Allright, I got it!
I saw the success message, then used the keys to reboot in recovery, that worked!
At the boot, I can read "ClockworkMod Recovery v5.0.2.0 E: Bad boot message "recovery ".
I believe the "E: Bad boot message "recovery " is a known issue, and but is not a problem - please let me know if I have to do anything about this.
So now I will compact the Cyanogenmod ROM (I don't know how much space I should free, but I'll try to free a decent ammount), and perform a Nandroid backup to SD card.
I believe the hardest/scariest is done. From now, if the ROM install fail, I could just restore the backup, I guess.
Are they any case when CWM is unaccessible (When I bricked my device, I had no access to stock recovery (which only perform factory reset) but just Emergency Mode. Why was that?) ?
Thank you, I will let you know about the rest.
(Will press the thanks button at the end I don't know if it's OK to thanks on multiple posts on one thread, on this forum)
EDIT:
That error message means you dont have SD-ext. Ignore it.
Click to expand...
Click to collapse
EDIT 2: Nandroid backup succesfully taken! I now have the files .android_secure.vfat.tar, boot.img, cache.yaffs2.img, data.yaffs2.img, nandroid.md5, recovery.img and system.yaffs2.img. Will backup these on my PC.
It's OK to thanks on multiple post.You just have a limit of 8 thanks per day.
ROM manager made anything inaccessible except emergency mode or fast boot mode for some people.
(When I flashed my Oone with CWM, ROM manager worked like a charm)
You can flash the ROM now
Regards,
akiratoriyama.
Sent from my GT-I9082 using Tapatalk
akiratoriyama said:
Don't worry you won't brick it.
(Talking from my experience of completely hard bricking aka dead booting my device due to kdz)
Just flash it.
It's that simple
Sent from my GT-I9082 using Tapatalk
Click to expand...
Click to collapse
akiratoriyama said:
It's OK to thanks on multiple post.You just have a limit of 8 thanks per day.
ROM manager made anything inaccessible except emergency mode or fast boot mode for some people.
(When I flashed my Oone with CWM, ROM manager worked like a charm)
You can flash the ROM now
Regards,
akiratoriyama.
Sent from my GT-I9082 using Tapatalk
Click to expand...
Click to collapse
I appreciate the information;
It's quite akwards that ROM Manager broke everything (And I asked for a BACKUP - that's so broken, it brick the device when you want to BACKUP <__<) - when it rebooted, it was in Fastboot mode, and I never saw that mode before. Tried a few recommended commands without problems, but when I rebooted, I only had access to Emergency Mode.
What would be informative for me to know, is that ROM Manager seems to not only have screwed the ROM, but the stock bootloader as well. Weird.
Shinobisoft said we need to compact the CM10 ROM with his utility first, because the System partition is too small (Otherwise, I will have no network). I will do that, I have the tool, that doesn't look complicated.
From now, I am backing up my SD Card content (DATA is backed up too) with Nandroid present on SD, so I could start formatting, immediately followed by SD partitioning.
I guess I should be fine at that point - if anything goes wrong, I should have the option to restore the Nandroid backup.
Will let you know when I'll have the ROM compacted (Probably today).
EDIT: YAY !
Everything worked as we expected! I saved my SD Card on my computer, wiped it, partition it from CWM (EXT: 1024MB, SWAP: 64MB. I have a 16 Micro SD, class 4 (Can't afford higher class much, for now), then installed the compacted ROM. Immediately after, I installed Gapps, then rebooted.
That worked !! This ROM is DOPE ! Totally worth upgrading ! Blazing fast !! (Will be slower with apps installed, but well)
I also have a working network!
There is one thing that "failed", I cannot get Link2SD to work. It always says "cannot create mount script". I checked with Windows (I know by experience that I should absolutely not edit Unix partitions in Windows, I just check), and the FAT32 partition is the first, then I have a EXT4 partition, then the Linux-Swap, I don't know why it doesn't work.
I used Gparted to format the EXT4 partition to EXT2, but same problem, "cannot create mount script". What am I supposed to do ?
Thanks youuu !! =D
I'm really happy to have done this on my own, with help - I now have more experience with Android, I have experience with Windows, Linux OS and OS X, but never did I tried flashing a ROM yet.
@GameX2
Just woke up to see this post
How much free space is there on your /system partition ?
Link2SD should be working.
Sent from my GT-I9082 using Tapatalk
akiratoriyama said:
@GameX2
Just woke up to see this post
How much free space is there on your /system partition ?
Link2SD should be working.
Sent from my GT-I9082 using Tapatalk
Click to expand...
Click to collapse
Hi,
Tanks for replying. out of 200mb, I have 70Mb free, but on /data. Last time i checked, /system was almost full (where can i check system size?).
Seems like lot of people have this link2sd issue.
@GameX2 use root explorer, it will tell you the remaining system space
@xu3sno or @ibub can you please help me ?
Sent from my GT-I9082 using Tapatalk
akiratoriyama said:
@GameX2 use root explorer, it will tell you the remaining system space
@xu3sno or @ibub can you please help me ?
Sent from my GT-I9082 using Tapatalk
Click to expand...
Click to collapse
That's what I've thought, according to "Storage Analyzer", /sysem has as minimum free space of 84KB (!) and a maximum of 4.63 MB.
Did not experience any weird stuff, for now.
sd-ext folder doest exist at root, but it's empty.
GameX2 said:
That's what I've thought, according to "Storage Analyzer", /sysem has as minimum free space of 84KB (!) and a maximum of 4.63 MB.
Did not experience any weird stuff, for now.
sd-ext folder doest exist at root, but it's empty.
Click to expand...
Click to collapse
Link2SD needs at least a MB to create mount scripts.
Delete some system apps like TerminalEmulator, CM File manager, Email, Exchange services.
Also use mini LatinIME.
Sent from my GT-I9082 using Tapatalk
akiratoriyama said:
@GameX2 use root explorer, it will tell you the remaining system space
@xu3sno or @ibub can you please help me ?
Sent from my GT-I9082 using Tapatalk
Click to expand...
Click to collapse
@akiratoriyama
Yes, that's right. You can check /system space by using Root Explorer. Or go to
Settings>About phone>Partition info.
I got 10+MB space left on /system partiton after trimmed the ROM and installed mini gapps.
You're right, Link2SD only works if there is 3MB, at least, left in system partition.
Sent from my LG-P500 using xda app-developers app
GameX2 said:
That's what I've thought, according to "Storage Analyzer", /sysem has as minimum free space of 84KB (!) and a maximum of 4.63 MB.
Did not experience any weird stuff, for now.
sd-ext folder doest exist at root, but it's empty.
Click to expand...
Click to collapse
Once you have success with link2sd creating mount scripts, you can access at /data/sdext. Been a long time since I ran Jan 8 cm-10, but I seem to recall that partition info is not in settings/about phone. But link2sd will have it. Or there are other apps. When viewing storage info from settings menu, don't confuse internal memory with /system (190mb). Internal that is shown there is/data (200mb).
Sent from my LG-P509 using Tapatalk 2
Link2SD needs at least a MB to create mount scripts.
Delete some system apps like TerminalEmulator, CM File manager, Email, Exchange services.
Also use mini LatinIME.
Click to expand...
Click to collapse
It worked !!
Geez, I went to 170MB of internal MB to 1GB, that's just plain insaneee !
Now I can use my LG P500h for an extra 2 years.
ibub said:
Once you have success with link2sd creating mount scripts, you can access at /data/sdext. Been a long time since I ran Jan 8 cm-10, but I seem to recall that partition info is not in settings/about phone. But link2sd will have it. Or there are other apps. When viewing storage info from settings menu, don't confuse internal memory with /system (190mb). Internal that is shown there is/data (200mb).
Sent from my LG-P509 using Tapatalk 2
Click to expand...
Click to collapse
Thank you! I was confused, because sd-ext2 at root is empty - nice to find it in /data/sdext2.
Suceess !!
Thanks !!
How Do I Install?
GameX2 said:
1) I've checked FlashImage GUI, it look really simple to use. This is what I see now:
https://dl.dropboxusercontent.com/u/67605655/snap20140216_103936.png
For flashing a recovery image, should I select Clear Dalvik & Clear Cache ? Do I have to enable USB Debugging?
Where can I find the recovery image for CWM ? Here maybe: http://forum.xda-developers.com/showthread.php?t=1523050
I don't know, I would download CWM v5.0.2.7_Touch_p500-Build 4.zip.
Would the terminal emulator method would be easier (I still need to find recovery.img)?
Code:
$ su
# mount -o remount rw /system
# cat /sdcard/flash_image > /system/xbin/flash_image
# chmod 755 /system/xbin/flash_image
# flash_image recovery /sdcard/recovery.img
# mount -o remount ro /system
# reboot recovery
Since I have no Nandroid backup (I cannot do it until CWM is installed), what could I do if something goes wrong ?
2-3) Excellent, thank you.
4) I plan on partitionning, but at which point shoud I preferably do it?
Thank you, I appreciate the help - sorry for all the newbie questions.
Click to expand...
Click to collapse
A bit new to installing a recovery and custom ROM on this LG Optimus One (very familiar with Sony phones though), apologies for the newbie-ness. I have all of the files as per this thread, but how do I install the GUI app without a file manager app?
Drachinos said:
A bit new to installing a recovery and custom ROM on this LG Optimus One (very familiar with Sony phones though), apologies for the newbie-ness. I have all of the files as per this thread, but how do I install the GUI app without a file manager app?
Click to expand...
Click to collapse
Install some file manager from play store. In phone settings (not file manager) choose security. Then choose to allow installation from unknown sources. Then open your file manager, scroll to sdcard/downloads/ ,and click on flashimage GUI.apk. Installation process will start.
Sent from my LG-P509 using Tapatalk 2
ibub said:
Install some file manager from play store. In phone settings (not file manager) choose security. Then choose to allow installation from unknown sources. Then open your file manager, scroll to sdcard/downloads/ ,and click on flashimage GUI.apk. Installation process will start.
Sent from my LG-P509 using Tapatalk 2
Click to expand...
Click to collapse
I guess I was thinking too much (or not at all!) Simplicity is the key a lot of times!
I tried all of the points in this thread and now this Optimus One has root, recovery and a new ROM. Thanks everyone! :good: