Related
UPDATED [09.02.2012] Mobile ODIN v2.15 [ROOT]
Changelogs
16.01.2012 - v1.30
- Fixed: Theme
- Fixed: Strange characters in file paths
- Added: Additional file accessability checks
- EverRoot: Fixed some situations where it failed
- EverRoot: Storage warnings added
- FlashKernel: Backed up to SD card instead of /system
- Dump: Various partition information added
Thanks to Chainfire and DooMLoRD we got the ChMO for the i9003!
http://forum.xda-developers.com/showthread.php?t=1347899
Is allready available for this devices:
Currently supported devices:
- Samsung Galaxy S GT-I9000
- Samsung Galaxy S GT-I9000B *NEW v1.20*
- Samsung Galaxy S GT-I9000M *NEW v1.20*
- Samsung Galaxy S GT-I9003 *NEW v1.20*
- Rogers Captivate SGH-I896 *NEW v1.20*
- AT&T Captivate SGH-I897 *NEW v1.20*
- Samsung Galaxy Tab 7" GT-P1000
- Samsung Galaxy S2 GT-I9100
- Samsung Galaxy S2 GT-I9100T *NEW v1.20*
- AT&T Galaxy S2 SGH-I777 *NEW v1.20*
- Sprint Epic 4G Touch SPH-D710 *NEW v1.20*
- Samsung Galaxy Note GT-N7000
New in v2.15:
- Samsung Galaxy S GT-I9003L
- Samsung Galaxy S2 GT-I9100G
Description: [30.11.2011] Mobile ODIN v1.25 [ROOT]
Mobile ODIN is the on-device firmware flasher of choice. Just throw those firmware files on your (internal or external) SD card, start Mobile ODIN and flash away.
! Your device must be rooted to be able to use Mobile ODIN !
If you use the EverRoot option (Market/Pro version only), Mobile ODIN will root the firmware while you flash it. Checking out that new leaked firmware? No reason to lose root!
All partitions are supported, as are loose files, .tar files and .tar.md5 files. Mobile ODIN will even check the MD5 signatures before flashing. While in theory Mobile ODIN can repartition and flash EFS and bootloaders, it will cowardly refuse to do so, for your own safety.
Flashing with Mobile ODIN does NOT increase your custom kernel flash counter or make the yellow warning triangle appear.
! USE AT YOUR OWN RISK !
Credits
Aside from my own CF-Root-based flashkernels, Mobile ODIN also uses (with permission) flashkernels built by these users:
- Codeworkx (I777, D710)
- Skin1980 (I9003)
- Kyuta Syoko (I896, I897)
Also many thanks to the various testers!
Attached in the Original Trhead is the Lite version of Mobile ODIN - this is a release exclusive to XDA and may not be redistributed ! Please note that you also need to download and install a "FlashKernel" manually if you are using the Lite version. These are listed a few posts down from here. The Pro version will automatically download and install these for you when needed.
DooMLoRD said:
... flashing via MobileOdin works for the .tar and .tar.md5 files...
though u cannot flash bootloader and PIT file via the app...
Click to expand...
Click to collapse
Thanks a lot DooMLoRD
Erahgon said:
It's up! Ver 1.2
->Lite: http://forum.xda-developers.com/attachment.php?attachmentid=798198&d=1322518352
L->Flashkernel (required for light version): http://attachments.xda-developers.com/attachment.php?attachmentid=798179&d=1322517367
->Market/Pro: https://market.android.com/details?id=eu.chainfire.mobileodin.pro
Original thread: http://forum.xda-developers.com/showthread.php?t=1347899
User manual (post #2 in the OT): http://forum.xda-developers.com/showpost.php?p=19375406&postcount=2
At thread owner: Please update your 1st post to reflect the above? It would be helpful to the peeps around here, I think. You could also change the title to "[MOD][ODIN] Chainfire's Mobile ODIN" or something like that!
Thanks a ton to all those who made us aware of this project and helped to bring it to the SG SL i9003! Cheers!
Click to expand...
Click to collapse
Thanks Erahgon.
Please , Someone who has installed amit's cf-root with cwm 5, install this, create dump file and send it along with amit's cf root.
Thanks.
Sent from my GT-I9003 using Tapatalk
mustali said:
Please , Someone who has installed amit's cf-root with cwm 5, install this, create dump file and send it along with amit's cf root.
Thanks.
Sent from my GT-I9003 using Tapatalk
Click to expand...
Click to collapse
please contact to Amit directly via pm. He will help u. I am also intereste in this app. It will eliminate pc's work.
Edit-
i told amit to provide a dump file. I am sure he will help us.
http://forum.xda-developers.com/showpost.php?p=19563494&postcount=219 i updated my FW to KPH and install CF-Root of Skin1980. Allready uploaded the files to the Chainfire's thread. Lets see what happen.
EDIT: Chainsfire answer:
Chainfire said:
It'd be a lot more useful if it was stock
Click to expand...
Click to collapse
Anyone has by chance a rom stock without tweaks? (inform the version, so he needs also the cf-root).
If i go to kpq by kies, i will have the kpq stock without tweaks or ext4?
Thank you very much.
@un rar..did yu get any person on stock gingerbread??
Sent from my GT-I9003 using xda premium
i'm affraid not yet. That's why i'm wondering if i upgrade to XXKPQ by Kies would be enough to be in XXKPQ stock (I mean if my tweaks go away) or if i have to flash a stock rom. I've done it two days ago and i preffer to enjoy it a bit more. But, if no one has a stock firmware, then I guess i'll have to do it.
Thank you very much DooMLoRD!!
http://forum.xda-developers.com/showpost.php?p=19671326&postcount=252
DooMLoRD said:
@Chainfire
Samsung Galaxy S SCL (i9003)
from firmware XXKPE onwards...
PIT file
XXKPQ.tar.md5 [latest firmware has kernel (as normalboot.img) and other files]
dump from Mobile ODIN
Click to expand...
Click to collapse
i dont know why the developers are rude or shy to do work for i9003????
Sent from my GT-I9003 using xda premium
So, is this? what is this for?
How to use?
Thanks
jasspreet said:
i dont know why the developers are rude or shy to do work for i9003????
Sent from my GT-I9003 using xda premium
Click to expand...
Click to collapse
Because they dont have our device!! As simple as that. And plus if I'm not wrong then some devs might be believing that i9000 & I9003 are same except the screen!!
Sent from my GT-I9003 using xda premium
Samsung Galaxy S GT-I9003 *development in progress*
Big thanks to Doomlord for the files..
quan815 said:
Samsung Galaxy S GT-I9003 *development in progress*
Big thanks to Doomlord for the files..
Click to expand...
Click to collapse
i hope this device gets supported by Mobile ODIN... i am fairly confident that it will... let me know if Chainfire needs any specific info/testing... keep watching that thread!!!
can someone please explain, what is this for
Sp8ky said:
can someone please explain, what is this for
Click to expand...
Click to collapse
This is Mobile ODIN.... its like ODIN(used for flashing samsung firmware) on your mobile itself.... using this one can flash firmware from the phone itself. No PC required.
lovely, im always confused....pda,phone etc
Just saw the thread, now Samsung Galaxy S GT-I9003 *testing in progress*..cool
Sent from my GT-I9003 using Tapatalk
mitoVonDido said:
Just saw the thread, now Samsung Galaxy S GT-I9003 *testing in progress*..cool
Sent from my GT-I9003 using Tapatalk
Click to expand...
Click to collapse
yes we are testing...
looks promising
DooMLoRD said:
yes we are testing...
looks promising
Click to expand...
Click to collapse
Means you are actually testing files??
Another Update :
Samsung Galaxy S GT-I9003 *complete - supported from v1.2*
Its done guys Yay!!
What...????? REALLY...!!! WOW...!!! I am so eager to test it.
---------- Post added at 02:28 AM ---------- Previous post was at 02:20 AM ----------
I am not able to find v1.2 version.
Hey guyz i am quite confused i am unable to flash Creed's rom on my fit! { don't know why }
..I tried flashing the ROM over CM7 and FitDroid but got stuck at the "CREED'S ROM" boot logo!..
I thought it might be because of the custom Roms (CM and FitDroid)...so..i flashed ddkq5 from odin then flashed Creed's ROM v1.4 via Cwm ( i have tried cwm v4 and cwmv5) but still the same case!...
Can someone provide with the actual method to flash Creed's rom v1.4 ?....
Regards..
Neil
«««««««««««««edit»»»»»»»»»»»»»
««««29/11/11»»»««8:45am»»»»
I managed to flash Creed's ROM v1.5 !...
To all others who are not able to flash Creeds ROM ...namely, Gendows and Reikableu ..please flash v1.5 it installs without any problem whereas v1.4 gets stuck on boot logo!
Thanx everyone!...
Regards,
Neil
galaxy fit + CM7.1 (2.3.7) + 801Mhz
bro try dis
1>go to recovery and wipe data/reset
2> flash creed 1.3 with odin
3> let the creed 1.3 boot then shut down phone
3> go to recovery and wipe data/reset again
4> now flash CMW via odin
5> open recovery wipe data/reset again (see if log shows any error)
6> now install creed 1.4 via CMW
i tried every possible thing
just skip it and wait for the 1.5 version
varun.katoch said:
bro try dis
1>go to recovery and wipe data/reset
2> flash creed 1.3 with odin
3> let the creed 1.3 boot then shut down phone
3> go to recovery and wipe data/reset again
4> now flash CMW via odin
5> open recovery wipe data/reset again (see if log shows any error)
6> now install creed 1.4 via CMW
Click to expand...
Click to collapse
Already tried this...Forgot to mention...
galaxy fit + CM7.1 (2.3.7) + 801Mhz
Gendows said:
i tried every possible thing
just skip it and wait for the 1.5 version
Click to expand...
Click to collapse
Ya...ur right bro....me too will try the v1.5 (hope it will work)!
galaxy fit + CM7.1 (2.3.7) + 801Mhz
I think you should first upgrade to xxkq2 coz cm can be flashed only on xxkq2.After that flash flash the creeds rom in general method.
Sachin93 said:
I think you should first upgrade to xxkq2 coz cm can be flashed only on xxkq2.After that flash flash the creeds rom in general method.
Click to expand...
Click to collapse
Hah...bro who told u that CM can be flashed only on kq2! ..I have flashed CM on almost all 2.3+ firmwares...and as far as flashing Creed's ROM on kq2 is concerned I tried flashing Creed's RoM on kq2 also but no luck! ..
galaxy fit + CM7.1 (2.3.7) + 801Mhz
you should install it on kq5
asad007 said:
you should install it on kq5
Click to expand...
Click to collapse
Tried this too
galaxy fit + CM7.1 (2.3.7) + 801Mhz
Noob question ... Do i need to install all the creeds versions or just the latest one? (1.5)
Enviado desde mi GT-S5670L usando Tapatalk
Deshabilitado said:
Noob question ... Do i need to install all the creeds versions or just the latest one? (1.5)
Enviado desde mi GT-S5670L usando Tapatalk
Click to expand...
Click to collapse
Just the latest v1. 5 ...if it installs on ur fit then please share!
galaxy fit + CM7.1 (2.3.7) + 801Mhz
Gendows said:
i tried every possible thing
just skip it and wait for the 1.5 version
Click to expand...
Click to collapse
Hey bro ...did u tried the v1.5?...did it worked?
galaxy fit + CM7.1 (2.3.7) + 801Mhz
neil.richard said:
Just the latest v1. 5 ...if it installs on ur fit then please share!
galaxy fit + CM7.1 (2.3.7) + 801Mhz
Click to expand...
Click to collapse
Thanks for the answer i will onstall it when he fix the alarm bug
Enviado desde mi GT-S5670L usando Tapatalk
Deshabilitado said:
Thanks for the answer i will onstall it when he fix the alarm bug
Enviado desde mi GT-S5670L usando Tapatalk
Click to expand...
Click to collapse
then if it works for you, we'll try it...
neil.richard said:
Hah...bro who told u that CM can be flashed only on kq2! ..I have flashed CM on almost all 2.3+ firmwares...and as far as flashing Creed's ROM on kq2 is concerned I tried flashing Creed's RoM on kq2 also but no luck! ..
galaxy fit + CM7.1 (2.3.7) + 801Mhz
Click to expand...
Click to collapse
Im talking about cwm 4.0.+ and later the cwm file wont be flashed on xxkpl and other versions iv tried it many times it can be flashed only on xxkq2 im talking
about clockwork mod recovery if u flash it in other roms the recovery mode wont display and it just gets stuck in boot logo.
Sachin93 said:
Im talking about cwm 4.0.+ and later the cwm file wont be flashed on xxkpl and other versions iv tried it many times it can be flashed only on xxkq2 im talking
about clockwork mod recovery if u flash it in other roms the recovery mode wont display and it just gets stuck in boot logo.
Click to expand...
Click to collapse
Yup!...u can't install cwm 4.0+ on xxkpl but u can flash on other firmwares ..u can flash Cwm on deodexed xxkpl by vish though!
galaxy fit + CM7.1 (2.3.7) + 801Mhz
still need to flash it ???
1- Flash any Froyo Rom via odin
2- flash any GB stock rom "i used the kq5 "
3- Flash CWM "i used CWM 5 V2"
4- flash creed's rom "i used 1.5"
then u r done
it's worked finally
thanx to Creed for that help
On some apps i have a black android logo and can.t see much... Like calendar , market.... Any way to get rid of that ?
On creeds rom 1.5
Thanx
Sent from my GT-S5670 using xda premium
PuiaAndrei said:
On some apps i have a black android logo and can.t see much... Like calendar , market.... Any way to get rid of that ?
On creeds rom 1.5
Thanx
Sent from my GT-S5670 using xda premium
Click to expand...
Click to collapse
there is a patch on the Rom's thread to remove it
just readed the thread
http://forum.xda-developers.com/showpost.php?p=18681745&postcount=6
its working for me as well...
Sent from my GT-S5670 using XDA App
ICS THEME FOR GALAXY FIT XWKT2..BY NVT992...
ENJOY BUDDIES RESPECT TO NVT992 FOR WORKING ON FIT ROM..all credits to nvt992(famed ics theme for galaxy mini)
screenshots...................nvt992 rocks...
How to install?
Screenshots are looking nice
just tell me flashable on creed's rom v1.7.2 or it is for stock roms
only for stock xwkt2(2.3.6) galaxy fit rom...
galaxyfitankit said:
only for stock xwkt2(2.3.6) galaxy fit rom...
Click to expand...
Click to collapse
Hey tankit, do u think this could work on another stock rom version? did u tryed?
I tried flash via cwm, but failed.
It is only for xwkt2
CREED's ROM v1.7.2
Bro isse only on xwkt2 ROM plz and plz thank nvt for it
sonudarock said:
It is only for xwkt2
CREED's ROM v1.7.2
Click to expand...
Click to collapse
So in order for me to get this theme on a Galaxy Fit, I'd have to upgrade/downgrade to 2.3.6, then flash CREED's ROM, then flash the theme?
No you should have only xwkt2 ROM and its 2.3.6 Android version download from the forum and install ROM by Odin than instal this theme you done nothing creed nothing rooting stuff bro
Nice theme!
Thanx bro flash it via cwm on xwkt2 ROM
Use cwm to flash
Use cwm to flash the zip file
sonudarock said:
It is only for xwkt2
CREED's ROM v1.7.2
Click to expand...
Click to collapse
i Like it!
Thanx.....
got stock with the bootanimation
i downloaded the stocked firmware XWKT2.. installed cwm recovery.. and flashed the fit-ics.zip then reboot.. i got stock in the animation... any help out there?
Clear cache n remove battery n reapply
You can apply theme via stock recovery also if you dint have cwm installed
hello guys ... sorry but i don't know what's best rom for galaxy fit
just need good rom and every thing work well .
i have galaxy w .. and i flash cm9b4 !! it's very good but i don't galaxy fit can flash cm9 or no !!
i'm waiting ur ideas guys .. thank all
or any one have stock rom 2.3.6 arabic
dodora3d said:
hello guys ... sorry but i don't know what's best rom for galaxy fit
just need good rom and every thing work well .
i have galaxy w .. and i flash cm9b4 !! it's very good but i don't galaxy fit can flash cm9 or no !!
i'm waiting ur ideas guys .. thank all
Click to expand...
Click to collapse
Best Rom threads are prohitbited on XDA..
pl read the Rule before you post.
for your quetion.
try official CM7 it works fine with evrything working.
FIT havn't yet got CM9(and even never) but you can try yajnab's CM10 its almost fully working..:good:
Janas rom latest version has Arabic , stock rom 2.3.6 for Region Iran has Arabic too , u can get it from samfirmware.com
Rohit02 said:
Best Rom threads are prohitbited on XDA..
pl read the Rule before you post.
for your quetion.
try official CM7 it works fine with evrything working.
FIT havn't yet got CM9(and even never) but you can try yajnab's CM10 its almost fully working..:good:
Click to expand...
Click to collapse
sry con i don't read rule ..
i'll flash cm7 what's best version ?
dodora3d said:
sry con i don't read rule ..
i'll flash cm7 what's best version ?
Click to expand...
Click to collapse
CM7 20121202 release. we get updates every sunday..
thnak you can u give me link ?
what's defferient between every sunday
i find link .. can u till me how install it ?
you must have Gingerbread and cwm recovery installed first of all
then
follow these steps
backup your current custom rom ( just to be safe ) .
wipe data/ reset
format system
wipe dalvik cache
install zip from sd card
and reboot
Sent from my GT-S5670 using xda premium
soham jambhekar said:
you must have Gingerbread and cwm recovery installed first of all
then
follow these steps
backup your current custom rom ( just to be safe ) .
wipe data/ reset
format system
wipe dalvik cache
install zip from sd card
and reboot
Sent from my GT-S5670 using xda premium
Click to expand...
Click to collapse
thank you ..
This how to flash a stock rom :
http://www.youtube.com/watch?v=JATv50RdrHM
that firmware has arabic , (STOCK)
http://www.hotfile.com/dl/168038295/986e9d9/S5670JPKT4_S5670OJPKT1_THR.zip.html
no need to pull the battery out , after rebooting hold home key + power key and make a factory reset then reboot again
soham jambhekar said:
you must have Gingerbread and cwm recovery installed first of all
then
follow these steps
backup your current custom rom ( just to be safe ) .
wipe data/ reset
format system
wipe dalvik cache
install zip from sd card
and reboot
Sent from my GT-S5670 using xda premium
Click to expand...
Click to collapse
sorry but when i take backup i don't sure if take it or no ! where's find the backup ! and what's name files find?
sorry for bad english
coz i don't sure on cwm ! i think not working well !
my rom now . gb 2.3.4
http://forum.xda-developers.com/showpost.php?p=24719114&postcount=1387
anyone try this cwm ?!!
dodora3d said:
http://forum.xda-developers.com/showpost.php?p=24719114&postcount=1387
anyone try this cwm ?!!
Click to expand...
Click to collapse
You're making it difficult for yourself ! Flash that stock rom , it has Arabic ,,, then if you want CWM recovery , go for TJ Style's CWM and flash it using Odin pc ,, any other cwm may brick your phone
samo_gf said:
You're making it difficult for yourself ! Flash that stock rom , it has Arabic ,,, then if you want CWM recovery , go for TJ Style's CWM and flash it using Odin pc ,, any other cwm may brick your phone
Click to expand...
Click to collapse
thank you ... but that's not problem what rom i flash .. but when i take backup !
btw i'm egyption too
:good:
i flash stock rom thank you are u use mod or tweaks ?
dodora3d said:
i flash stock rom thank you are u use mod or tweaks ?
Click to expand...
Click to collapse
I'm using janas rom , lots of tweaks and customizations . For stock rom u can root it and delete unwanted apps for more free space and ram , also u can flash slaidyboost script . It has some good tweaks but I'm not sure if it could be flashed over stock rom or not !
dodora3d said:
hello guys ... sorry but i don't know what's best rom for galaxy fit
just need good rom and every thing work well .
i have galaxy w .. and i flash cm9b4 !! it's very good but i don't galaxy fit can flash cm9 or no !!
i'm waiting ur ideas guys .. thank all
Click to expand...
Click to collapse
u have galaxy w not fit then u might be in a wrong forum
speed_bot said:
u have galaxy w not fit then u might be in a wrong forum
Click to expand...
Click to collapse
no i have galaxy w ! but my sister have fit not wrong forum
thnQ u
I have flashed the custom rom on my galaxy y which is the jelly blast v3. When i tried to update my rom via ota it says error in downloading update i have 3.0.0 and the rom gives me a message of updating to 3.0.4 what should i do should i mannually update the next version 3.0.1. If yes please tell me how to do it through CWM because i dont have a good knowledge of CWM so please help me how to update next version of jelly blast through clock work mod????
Just flash the zip file ( updater JBV3OTA2 ) in clockworkmod recovery then wipe cache and dalvik cache and you are good to go. :fingers-crossed: :laugh: :highfive:
this is the link for the updates: http://forum.xda-developers.com/showthread.php?t=1679563
remember to press thanks if i helped u.
samsung galaxy y
jellyblast rom v3.0.4
merruk kernel 2.5 deluxe edition
PHONE IS OVERCLOCKED TO 1.248 GHZ
alexbrian21 said:
Just flash the zip file ( updater JBV3OTA2 ) in clockworkmod recovery then wipe cache and dalvik cache and you are good to go. :fingers-crossed: :laugh: :highfive:
this is the link for the updates: http://forum.xda-developers.com/showthread.php?t=1679563
remember to press thanks if i helped u.
samsung galaxy y
jellyblast rom v3.0.4
merruk kernel 2.5 deluxe edition
PHONE IS OVERCLOCKED TO 1.248 GHZ
Click to expand...
Click to collapse
are available also for samsung galaxy y duos?
glad if it can help ...
I don't know. Becos the ROM us not in development already. If u want to know go to the dev thread.
Sent from my GT-S5360 using xda app-developers app
can u help me..why i cant flash first ota on jelly blastv3 3.0.0,,,,,,,,,,??cant even use ota update center keeps saying ROM UNSUPPORTED,,,after i flash the rom my kernel stay on stock kernel,,,is it normal??or do i have to download and flash the kernel manually???
Is should be normal for u and u can downloa the ota's at the link above i hav given. Pls press thanks if i helped. If u want the kernel , try reflashing the rom again. ( if it works with stock kernel perfectly you don't hav the need to change it.
Sent from my GT-S5360 using xda app-developers app
update
how do I update from jellyblast(ota5 updated) to nemesis without doings a date reset?