I've read previous threads that instruct to search for rom.zip in the temp folder. I have found the rom.zip but it does not flash using CWM. How do I get the rom which I can flash through CWM?
You don't flash it through cwm, you rename it accordingly (PHxxIMG.zip) based on your phone model and flash it through HBOOT.
Sent from my ADR6425LVW using XDA
hellhawk741 said:
You don't flash it through cwm, you rename it accordingly (PHxxIMG.zip) based on your phone model and flash it through HBOOT.
Sent from my ADR6425LVW using XDA
Click to expand...
Click to collapse
Okay. I do recall my phone searching for similarly named images when I booted the phone to recovery. How exactly am I supposed to flash them after renaming and placing them in the root of my SD Card?
Also, do normal regional restrictions still apply to this process? (Will it bail if I try flashing the phxximg.zip of a European RUU on a asian phone?)
Thanks a lot.
Don't know about the regional restrictions. To flash it you just put the renamed zip in the root of your SD card and reboot into bootloader. It'll scan for the file and ask you to press some key if you want to flash the update. That's it.
Sent from my Desire HD using xda premium
Regional restrictions apply unless you have changed your CID to allow for flashing of other regions ROMs. This is called "SuperCID". I'm not sure which HTC phone you have otherwise I'd link you to how to get it on your phone, but it's a simple google search "SuperCID *phone name*"
When you have SuperCID, it allows the flashing of any ROM by any carrier so if you intend on doing an Asian ROM on a Euro phone, check and make sure the hardware is the same, otherwise you'll bork something.
Example: if you flashed a CDMA EVO 3D ROM on a GSM EVO 3D, you'd likely lose your data, signal at least, given that the CDMA and GSM 3D's have different radios. You'd probably lose even more but the data and signal at least are for sure.
PoorCollegeGuy said:
Regional restrictions apply unless you have changed your CID to allow for flashing of other regions ROMs. This is called "SuperCID". I'm not sure which HTC phone you have otherwise I'd link you to how to get it on your phone, but it's a simple google search "SuperCID *phone name*"
When you have SuperCID, it allows the flashing of any ROM by any carrier so if you intend on doing an Asian ROM on a Euro phone, check and make sure the hardware is the same, otherwise you'll bork something.
Example: if you flashed a CDMA EVO 3D ROM on a GSM EVO 3D, you'd likely lose your data, signal at least, given that the CDMA and GSM 3D's have different radios. You'd probably lose even more but the data and signal at least are for sure.
Click to expand...
Click to collapse
Exactly, just got an incorrect CID error. I'm trying to do this on HTC One V. The bootloader is unlocked. Can you please link me to the SuperCID for HTC one V? Is it software or hardware?
Also for this process, do I need to have stock recovery or having CWM won't cause any issue?
Moreover, is it okay if the bootloader is unlocked or do I "relock" it?
PoorCollegeGuy said:
Regional restrictions apply unless you have changed your CID to allow for flashing of other regions ROMs. This is called "SuperCID". I'm not sure which HTC phone you have otherwise I'd link you to how to get it on your phone, but it's a simple google search "SuperCID *phone name*"
When you have SuperCID, it allows the flashing of any ROM by any carrier so if you intend on doing an Asian ROM on a Euro phone, check and make sure the hardware is the same, otherwise you'll bork something.
Example: if you flashed a CDMA EVO 3D ROM on a GSM EVO 3D, you'd likely lose your data, signal at least, given that the CDMA and GSM 3D's have different radios. You'd probably lose even more but the data and signal at least are for sure.
Click to expand...
Click to collapse
Can you please post me the link to the SuperCID for HTC One V. Googling didn't help much.
Another very important question, my stock ROM was an Indian one. I rooted and flashed a stock European ROM. Due to this process, do you think the original CID was modified?
abhishek_turbo911 said:
Exactly, just got an incorrect CID error. I'm trying to do this on HTC One V. The bootloader is unlocked. Can you please link me to the SuperCID for HTC one V? Is it software or hardware?
Also for this process, do I need to have stock recovery or having CWM won't cause any issue?
Moreover, is it okay if the bootloader is unlocked or do I "relock" it?
Click to expand...
Click to collapse
You'll most likely need to re-lock before flashing the RUU. I haven't heard of a way to get super-cid on the One V yet, but if it's possible you should be able to find it in the HTC One V forums.
Related
can someone help me out please? i rooted my g2 today and about 2 hours later dropped it flat on its face. the lcd broke, i cant see anything on the phone just vibrates when i turn it on.. is there some way using the sdk on the computer to unroot the phone so i can send it for an insurance replacement?
If its anything like the desire you can apply a RUU update.exe that flashes the phone rom, hboot, radio and recovery i.e. stock. However if yours is branded i.e. has your carriers software all over it, you'll need to find the corresponding RUU for that carrier. Also if its branded you'll probably (desire does) need to make a goldcard if you were to apply an unbranded RUU.
richardpearce123 said:
If its anything like the desire you can apply a RUU update.exe that flashes the phone rom, hboot, radio and recovery i.e. stock. However if yours is branded i.e. has your carriers software all over it, you'll need to find the corresponding RUU for that carrier. Also if its branded you'll probably (desire does) need to make a goldcard if you were to apply an unbranded RUU.
Click to expand...
Click to collapse
EDIT: didn't realise the G2 was T-Mobiles phone (if Im not mistaken and check me on this is the HTC Hero)... erm heres a link to a load of G2 roms, radios etc http://forum.xda-developers.com/showthread.php?p=4525584
do some researching into tutorials to make sure your doing the right thing. Also to research is whether your phone is GSM or CDMA as you will also have to flash the right RUU for that too.
When you rooted did you only root the rom or also patch a modded recovery too? If its the rom I suppose you could apply just the rom update, however if you applied a recovery you'll have to flash that with a stock one too.
Sorry its a bit confusing...
I've done a couple forum searches between the General & Q&A section, and I haven't found the answer.
I've already S-off'ed, Rooted, and flashed CWM 5.X. And I'm just wondering if Super CID is necessary after completing these steps.
I'm new to the Sensation/HTC products, so sorry if this is a really noob question.
U do because if u dont it will just limit the number of roms u can flash on ur phone for ex. i use insert coin
nd its based on European sensation nd If I have tmo cid I won't be able to use it
Sent from my HTC Sensation Z710e using XDA Premium App
deol 4ever said:
U do because if u dont it will just limit the number of roms u can flash on ur phone for ex. i use insert coin
nd its based on European sensation nd If I have tmo cid I won't be able to use it
Sent from my HTC Sensation Z710e using XDA Premium App
Click to expand...
Click to collapse
That's not gonna happen. If you are s-off then you can install any custom rom you like.
I, for example, have Vodafone cid but i flashed insert coin, leedroid and rcmix so far.
You have to change cid only if you want to flash an official HTC RUU to, let's say, a Vodafone branded phone.
So for me Super CID is absolutely optional.
I am very confused about this.
I have not gone with SuperCID; I have CID=TMOB0101. I keep seeing in ROM descriptions "You must have SuperCID", and yet I succeed in installing and running that ROM without SuperCID.
I *am* S-OFF and rooted, of course, and I always make sure that I have the corresponding firmware installed.
I've installed current ROMs that are originating from several different continents, as far as I can tell.
So why do I keep being told that I need to go with SuperCID? It seems pointless.
varxx said:
I am very confused about this.
I have not gone with SuperCID; I have CID=TMOB0101. I keep seeing in ROM descriptions "You must have SuperCID", and yet I succeed in installing and running that ROM without SuperCID.
I *am* S-OFF and rooted, of course, and I always make sure that I have the corresponding firmware installed.
I've installed current ROMs that are originating from several different continents, as far as I can tell.
So why do I keep being told that I need to go with SuperCID? It seems pointless.
Click to expand...
Click to collapse
+1 I completely agree with you!...
SuperCID is optional, I think most people will do it as it will allow you to flash any firmware without having to worry if your CID is compatable with the firmware your trying to flash. For example with a vodafone CID you would really only be able to flash vodafone firmware. Although this doesn't cause an issue when flashing a ROM most devs will recommend a certain firmware to be used.
Saying that all the ICS based roms will require a firmware update so it would mean you would have to either edit files within the firmware, SuperCID and now for all those still to worried to SuperCID the guys over at the dev forum have made a nice sticky on firmware updates. HERE without the need to SuperCID
The CID would only limit the capability of flashing Stock Roms from different carriers, for example my CID is BM_001 which stands for Bell Mobile which is the original carrier of the device, if I were to flash a lets say Stock T-Mobile Rom I may encounter some issues. With Super Cid (which changes the CID to 1111111) you open your devices to all other "Carrier Roms"
I have a rooted S One that seems to have lost its root access and signal after OTA update from Bell - the phone was bought on eBay as an "unlocked sealed" item, which wasn't the case. I want to restore the phone to stock and SIM unlock it for use with Telus, but there's no 1.84 RUU for Rogers available. I just want to confirm I can't restore the phone to stock without the 1.84 RUU. Or, if there's an alternative to get it working again, what that alternative might be and where to start. Thanks for any help.
tykidd66 said:
I have a rooted S One that seems to have lost its root access and signal after OTA update from Bell - the phone was bought on eBay as an "unlocked sealed" item, which wasn't the case. I want to restore the phone to stock and SIM unlock it for use with Telus, but there's no 1.84 RUU for Rogers available. I just want to confirm I can't restore the phone to stock without the 1.84 RUU. Or, if there's an alternative to get it working again, what that alternative might be and where to start. Thanks for any help.
Click to expand...
Click to collapse
Post is a bit confusing. You talk about Bell, Rogers, and Telus all at once. Also, if you got an OTA update from Bell, you will only be able to execute an RUU that has an hboot version equal to or higher than your current one.
If you are looking for a more recent RUU than the ones posted on http://forum.xda-developers.com/showthread.php?t=1543588
then I suggest you send a private message to Football, the user who started that post. He helped me find newer Bell Mobility RUUs (which have since been posted to the thread).
Your other option is to do a bootloader downgrade (see the dev post on this, its a bit complicated), and then you can flash other radios from http://forum.xda-developers.com/showthread.php?t=1998270
If you dont want to downgrade your bootloader, you can always flash to a CM10 base (AOSP type) ROM, such as PAC Man, or Jelly Bam, etc. Then you can flash radios without having to downgrade.
Again, though this is all assuming that your true problem is with you baseband radio and now switching carriers has made your reception poor...
Also remember you will have to relock your bootloader before you execute an RUU, otherwise it wont take (that and a correct bootloader version)
AKToronto
Thanks for the info. The phone is a sim-unlocked Fido unit. It was running on Bell before the OTA update.
Here are the specs:
Android version: 4.0.3
HTC Sense version: 4.0
Software number: 1.84.631.9
HTC SDK API level: 4.11
HTC Extension version: HTCExtension_403_1_GA_4
Build number: 1.84.631.9 CL64348 release-keys
Is the "build number" the RUU? I'll try Football, but do I need the Rogers (Fido) RUU?
Thanks.
you can not execute an rogers ruu on a bell phone, the cid wont match
there is an app on play who will display you the cid and the original network; like that you'll know exactly what phone do you have in hand
you just have to unlockit after and you will be able to useit in whatever network you want
Thanks. Ran CID getter and says it's ROGER001. So I've confirmed that I need a Rogers file. And I would like to unlock it, but from what I've read I cannot restore back to Rogers 1.70 because the unit has been updated to 1.84. I have read that if I can find a 1.84 Rogers file, I can use that to restore the unit. This is the next thing I need to confirm. I appreciate your help.
I think that is almost correct. You can change the CID to the Rogers one using the same technique as posted in the super Cid thread in the development section. Normally though you can't flash an older ruu as the hboot version can't be older. But You may also want to try posting a message in the bootloader downgrade thread that is stickied to n the development section. I think if you downgrade your bootloader and also do a minor hex edit to a partition you can flash an older RUU. I have downgraded my bootloader but haven't tried flashing an older ruu so I can't say for sure.
Sent from my HTC One S using xda premium
Thanks again. So I can assume the CID is already Rogers, yes? I don't want to change it. My hope is that I can use the All in One Toolkit (one of the sticky posts) to bring the phone back to stock and then SIM unlock it for use with Telus. If I run the Toolkit, and use cbetso's instructions from the "How to Return to Stock" post (after adding the stock recovery to the folder). If I locate the Rogers 1.84 RUU, can I run it without downgrading?
don't assume, your cid is rogers ROGER001, so there is absolutely no way your phone could download and execute an update from bell.
so I can not understand what has bell to do in this.
if you just want to use it on telus network, you just have to unlock it, you don't even need root for this. and the phone will work just fine.
the root is needed when you want to change ROM, radio, debloat and others.
one of the others will be tweaking the build.prop file to achieve maximum capacities of your 3g/4g desired network
Thanks - it's a difficult story to tell, really. It was a Rogers unit, SIM unlocked to work with Bell. It was on Bell's network for two months, and an OTA update caused major radio and reception problems. It will not keep a network signal anymore. I have tried other SIMs in the unit and it will not recognize them, nor start up with the "Enter Unlock Code" screen to SIM unlock it. It's my understanding that I need to return it to stock by finding the Rogers RUU file that matches the software version on the unit, which is 1.84. This is my very limited understanding of the issue, but it's what I've been able to figure out.
if it was a rogers device, and you did not change the CID, you get the ROGER001 cid with the app, your phone is still a rogers device
doesn't matter in which networks was used, for the two months before you get it, and by you after
as long the cid stays ROGER001, your phone will remain a rogers device, unlocked to be used in different networks.
so there is absolutely no way an OTA update, from bell or telus could be the source of your problems, because your phone will not download or execute an ota update from other networks
same for rogers ota update, as long the phone was unlocked, will not execute OTA updates, even the updates will be downloaded on the phone
your connection problem came from other reasons;
however it you want to return the phone to rogers stock, the key number is HBOOT version;
you can execute any RUU with HBOOT version higher or equal with your present version on the phone
if somehow you're on a very high version and you can not find the appropriate RUU, we can always downgrade RUU, check development section for tutorial
it's not very simple, but as long you're ok and you understand the steps, go for it, it is doable.
if you have root, you might try different radios before all above, or maybe a custom rom; just an ideea; as long the phone is not soft bricked or physically damaged, there is no reason a custom rom will not work
Thanks for the information. There seems to be other problems with the unit, including it won't delete all data after hard reset, it won't recognize other networks when other SIMs are put in, it has been upgraded past the 1.70 stock Rogers RUU. I wish I could get it figured out or I may have to sell it as is. Appreciate your help.
factory reset in fastboot didn't work?
means you're on some custom rom with non stock recovery?
have you tried to flash a stock recovery? any of them, whatever you'll find around here; there are no much difference in term of facilities between them;
then you should be able to restore phone to factory defaults
try find somewhere All in one kitt one S v1.0; there is stock recovery in it, and flashing is easy
in v1.1 there is no more stock recovery
donwload ruu or open up ruu..when it first starts go into your windows manager and in the link section delete what you have in that section like c:/program files and replace it with %temp% and it will find two encrypted folders with a big letter/digit name and they will show you what time they were opened . open them up and find rom.zip copy it to your desktop and then extract it somewhere safe .. in the folders in rom.zip you will see recovery_signed.img rename it recovery.img and flash it via hasoons tool kit provided in the development section..just in case you ever run into this again
Thanks. Can I flash a stock recovery in the All in One Toolkit without having the proper RUU version I need? Will this allow me to factory reset the phone, and the radio issue is another unrelated problem? The unit is supposed to be SIM unlocked, but when I put another carrier's SIM in, I still have no radio and I do not see the screen that says "unrecognized SIM" with an "enter unlock code" option.
tykidd66 said:
Thanks. Can I flash a stock recovery in the All in One Toolkit without having the proper RUU version I need? Will this allow me to factory reset the phone, and the radio issue is another unrelated problem? The unit is supposed to be SIM unlocked, but when I put another carrier's SIM in, I still have no radio and I do not see the screen that says "unrecognized SIM" with an "enter unlock code" option.
Click to expand...
Click to collapse
Not sure about your radio issue, that would require testing out different radios. You can do that on a higher hboot by trying AOSP ROMS and using the Radio flasher in the dev forums.
As for flashing stock recovery you can also just use the following link: http://loadbalancing.modaco.com/down...ery_signed.img
The stock recovery doesnt really change from RUU to RUU. You dont need a particular recovery to use a particular RUU, as far as I know.
Thanks - you wanna take another look at that link? It didn't seem to be anything. Or do I need to change the extension?
tykidd66 said:
Thanks - you wanna take another look at that link? It didn't seem to be anything. Or do I need to change the extension?
Click to expand...
Click to collapse
http://loadbalancing.modaco.com/download.php?file=ville_recovery_signed.img
Try that. Sorry about the other link
I maybe miss it, but you never said what is the exact status of the phone right now;
it is booting? it is working on some network? at least partially like voice only? what ROM are you on? what HBOOT?
Hi there - thanks for getting back to me and asking. The phone seems to be booting normally and always has been. It is not able to recognize any new SIM card. It's a Rogers unit, and when I add my Telus SIM it does not go to the "Unrecognized SIM" screen, it actually registers the TELUS network for a moment, then the radio gives no signal.
How can I check the ROM, 'cause I have no idea. Is the HBOOT in these specs?
Android version: 4.0.3
HTC Sense version: 4.0
Software number: 1.84.631.9
HTC SDK API level: 4.11
HTC Extension version: HTCExtension_403_1_GA_4
Build number: 1.84.631.9 CL64348 release-keys
Thanks again.
for the Hboot version you have to reboot in fastboot
for recovery reboot into recovery
for the ROM version, once booted normaly you have to go into about phone > software
are you sure you have the right settings for Telus APN? for some reasons, the phone will not registered to network, if apn setting are wrong;
at least for me, which I'm opposite to you as I have a telus phone and using it in fido network, if I dont have Fido APN setted up, the phone does not register to network
I need some major help, good folks of XDA. I've purchased this HTC One S from a guy who got it from Fido; naturally it was locked to Fido. I was planning on giving it to my girlfriend who is with Telus. I used cellunlocker.net to unlock the phone to find out that it didnt work with Telus. It would pick up signal then lose signal, pick up signal and lose signal every 10 seconds or so. I thought if I put a custom ROM on it might get me signal so I unlocked bootloader, rooted and put Viper ROM on it but it turns out it still wouldn't pick up network on Telus. So I decided to try it on my network, Rogers, and it picks up network but only 2G!!! Now my One S has the stable CM10 on it with baseband 1.08ts.50.02.16_10.08e.50.04L, unlocked bootloader with s-on, hboot 1.06, radio - 0.16.31501s.02
Here are the solutions I have tried so far to this problem;
-Tried to install multiple RUU both with ROGER001 CID and Super CID:11111111 and I couldn't install any of the RUUs, kept getting Error 155 with Rogers RUU and Check CID errors with other RUUs.
-Used to have 1.13 hboot but downgraded to 1.06 so I could change basebands and everytime I flash a different baseband, nothing changes after reboot.
-There is a recent jellybean rogers ota update zip but I dont know how to install it
please someone help!!! Thank you in advance and even more if my problem ever gets solved
Wrong forum for this kind of question. Have you tried flashing the telus radio? Also modifying the build.prop with the telus settings might help. Odd that you're having that issue on Rogers since Fido is the same network. Sounds like someone may have sold you a dud...
Sent from my HTC One S using xda premium
alltubetone said:
Wrong forum for this kind of question. Have you tried flashing the telus radio? Also modifying the build.prop with the telus settings might help. Odd that you're having that issue on Rogers since Fido is the same network. Sounds like someone may have sold you a dud...
Sent from my HTC One S using xda premium
Click to expand...
Click to collapse
Just asking, why is this the wrong (forum) as you say cuz this forum handles all devices does it not and I don't see anything wrong with his post?
SuperCID lets you flash any RUU, that error is most likely down to the bootloader being unlocked so if you really want to run a RUU then you want SuperCID and the lock the bootloader then run the RUU and also before you start the RUU be in fastboot mode first.
Darknites said:
SuperCID lets you flash any RUU, that or is most likely down to the bootloader being unlocked so if you really want to run a RUU then you want SuperCID and the lock the bootloader then run the RUU and also before you start the RUU be in fastboot mode first.
Click to expand...
Click to collapse
I did fastboot oem lock before flashing and got the same results; rather frustrating
alltubetone said:
Wrong forum for this kind of question. Have you tried flashing the telus radio? Also modifying the build.prop with the telus settings might help. Odd that you're having that issue on Rogers since Fido is the same network. Sounds like someone may have sold you a dud...
Sent from my HTC One S using xda premium
Click to expand...
Click to collapse
is it possible for a dud phone to have only 2g working and not get 3g?
dpk0875 said:
I did fastboot oem lock before flashing and got the same results; rather frustrating
Click to expand...
Click to collapse
Try hex editing mmcblk0p23 .... There is a method here for flashing RUUs that is discussed in the development forum in the sticky for downgrading your bootloader.... Try the hex edit, and then lock and then flash.
You could also try flashing a different baseband radio. For Canada, I didnt get the best reception from 1.08. You can d/l new baseband radios either for your phones radio partition or for CM10 (which uses a different location). There is a thread with radios collected in them in the development section.
I would try flashing a different radio before the RUU... The RUUs will upgrade your bootloader and then you cant flash new radios and other partition on SENSE seperately (ie ROMS wont flash properly and you will need to fastboot the boot.img every time)...
Funny , I unlocked my Original Fido One S to use it on Wind and it works perefectly. It should work on Telus ...have you tried inputting telus apn and restarting the phone after?
Before anyone tries to flame me, I've read all of the recent ICS and JB rom threads, as well as most of the generic question threads. I've unlocked, rooted, and flashed several roms before settling on CleanROM so I am not a complete noob. The master q&a thread doesn't cover RUUs much, and people aren't that interested in applying non rootable RUUs, so info on going back to stock on a newer or even older RUU doesn't seem to be widely available. My biggest concern is bricking my phone or losing major functionality, as some people using asian based roms seem to be having reboot and/or wifi issues.
1. Applying a different carriers S4 JB RUU is perfectly safe as long as I relock the boot loader, even with Super-CID.
I've seen conflicting reports of issues with RUUs when you have Super-CID, even with the original shipping RUU and a relocked boot loader. Can someone confirm that using RUUs is safe as long as the boot loader is relocked? What if it isn't relocked? Just an error or a bricked phone?
2. Once you unlock your phone on 1.14, you are stuck with that radio forever unless you apply an RUU or switch to Cyanogenmod.
3. Assuming RUUs are safe, applying a different carriers' RUU on my AT&T One X won't hurt anything. There may be apn issues, but otherwise everything should work (especially the camera and wifi).
Again, I understand that without root, I may not be able to add apns anyway. AT&T at least seems to have blocked the ability on their stock rom; not sure if other carriers do the same.
I really appreciate the help. I have searched, so this is more of a confirmation than anything else. Just trying to avoid bricking my phone and learn something new at the same time.
Tim
Sent from my HTC One X using xda premium
tlazarus said:
Before anyone tries to flame me, I've read all of the recent ICS and JB rom threads, as well as most of the generic question threads. I've unlocked, rooted, and flashed several roms before settling on CleanROM so I am not a complete noob. The master q&a thread doesn't cover RUUs much, and people aren't that interested in applying non rootable RUUs, so info on going back to stock on a newer or even older RUU doesn't seem to be widely available. My biggest concern is bricking my phone or losing major functionality, as some people using asian based roms seem to be having reboot and/or wifi issues.
1. Applying a different carriers S4 JB RUU is perfectly safe as long as I relock the boot loader, even with Super-CID.
I've seen conflicting reports of issues with RUUs when you have Super-CID, even with the original shipping RUU and a relocked boot loader. Can someone confirm that using RUUs is safe as long as the boot loader is relocked? What if it isn't relocked? Just an error or a bricked phone?
2. Once you unlock your phone on 1.14, you are stuck with that radio forever unless you apply an RUU or switch to Cyanogenmod.
3. Assuming RUUs are safe, applying a different carriers' RUU on my AT&T One X won't hurt anything. There may be apn issues, but otherwise everything should work (especially the camera and wifi).
Again, I understand that without root, I may not be able to add apns anyway. AT&T at least seems to have blocked the ability on their stock rom; not sure if other carriers do the same.
I really appreciate the help. I have searched, so this is more of a confirmation than anything else. Just trying to avoid bricking my phone and learn something new at the same time.
Tim
Sent from my HTC One X using xda premium
Click to expand...
Click to collapse
Im on hboot 1.14, firmware 2.20 att. Unlocked , rooted , flashed Rom. However , I had some problem then decided go back stock.
1. Downloaded ruu2.20 for att
2. Relock bootloader
3. Boot phone to bootloader mode then run ruu. Now my phone is stock
P/s :
- you don't need to root your phone to add apn . I can add T-Mobile apn just fine after I flashed ruu.
- ruu.exe can't run if you bootloader is unlocked.
Sent from my HTC One X using XDA Premium HD app
tritran18518 said:
Im on hboot 1.14, firmware 2.20 att. Unlocked , rooted , flashed Rom. However , I had some problem then decided go back stock.
1. Downloaded ruu2.20 for att
2. Relock bootloader
3. Boot phone to bootloader mode then run ruu. Now my phone is stock
P/s : you don't need to root your phone to add apn .
Sent from my HTC One X using XDA Premium HD app
Click to expand...
Click to collapse
Thanks - that answers my RUU questions as far as going back to stock using RUUs. I assume the same applies to other carrier's RUUs, i.e. Telus/Asia. What about using an OTA on a phone with Super-CID?
redpoint73 said:
A factory reset or running the RUU will not change the CID.
SuperCID doesn't prevent you from getting the AT&T OTA (although root and unlocked bootloader will).
Click to expand...
Click to collapse
^^
jiggamanjb said:
^^
Click to expand...
Click to collapse
Okay, I think that answers my questions. No problems with using a RUU, AT&T or otherwise, as long as it is for the XL. Stuck on my current radio unless I use a RUU. And I need to relock my bootloader before applying a RUU, although I can unlock it after. I will lose root, however. Thanks!